Table of Contents
ASUS VA229H User Manual
Displayed below is the user manual for VA229H by ASUS which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
VA229H
LCD Monitor
User Guide
ii
Copyright © 2014 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
Table of contents
Safety information ...................................................................................... iii
Care & Cleaning .......................................................................................... iv
1.1 Welcome! ...................................................................................... 1-1
1.2 Package contents ......................................................................... 1-1
1.3 Assembling the monitor base ..................................................... 1-2
1.4 Monitor introduction .................................................................... 1-3
1.4.1 Front of the LCD monitor ............................................................ 1-3
1.4.2 Rear of the LCD monitor .............................................................. 1-5
2.1 Detaching the arm/stand (for VESA wall mount)....................... 2-1
2.2 Adjusting the monitor .................................................................. 2-2
3.1 OSD (On-Screen Display) menu ................................................. 3-1
3.1.1 Howtorecongure ...................................................................... 3-1
3.1.2 OSD Function Introduction ......................................................... 3-1
3.2 Specications ............................................................................... 3-8
3.3 Troubleshooting (FAQ) ................................................................ 3-9
3.4 Supported Timing List ............................................................... 3-10
iii
Safety information
• Before setting up the monitor, carefully read all the documentation that
came with the package.
• To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
• Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
• Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power
standard.
• Do not overload power strips and extension cords. Overloading can
result in fire or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
• Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100 ~ 240V AC.
• The socket-outlet shall be installed near the equipment and shall be
easily accessible
• If you encounter technical problems with the monitor, contact a
qualified service technician or your retailer.
iv
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the
cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to
make sure that the flicker disappears.
• You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
v
Wheretondmoreinformation
Refer to the following sources for additional information and for product
and software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.
1-1
ASUS LCD Monitor VA229H
1.1 Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper,
broader, and brighter display, plus a host of features that enhance your
viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings you!
1.2 Package contents
Check your package for the following items:
LCD Monitor
Monitor Base
Quick Start Guide
Warranty Card
Power Cord
1x HDMI Cable (option)
• If any of the above items is damaged or missing, contact your retailer
immediately.
1-2 Chapter 1: Product Introduction
1.3 Assembling the monitor base
1. Attach the base to the arm.
2. Screw the base to the arm tightly.
1
2
• We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
1-3
ASUS LCD Monitor VA229H
1.4 Monitor introduction
1.4.1 Front of the LCD monitor
4
12
AUTO MENU
-+
3 5
1. AUTO Button:
• When OSD menu is off, press to activate the Auto Adjustment function
The Auto Adjustment function is used to optimized the H.Pos, V.Pos,
Clock and Focus.（Only available for VGA input.）
• When OSD menu is on, press to exit the OSD menu.
2. - Button:
• When OSD menu is on, press - or + to adjust menu.
• Press this button over five seconds to enable or disable the key lock
function.
3. + Button:
• When OSD menu is on, press - or + to adjust menu.
1-4 Chapter 1: Product Introduction
4. MENU Button:
• Press this button to enter the OSD menu.
• Press this button to enter/select the icon (function) highlighted while the
OSD is activated.
5. Power Button/Power Indicator:
• Press this button to turn the monitor on/off.
• The color definition of the power indicator is as the below table.
Status Description
Blue ON
Amber Standby mode
OFF OFF
1-5
ASUS LCD Monitor VA229H
1.4.2 Rear of the LCD monitor
6
1 2
HDMI
3
VGA
5
4
1. AC-IN port
2. HDMI port
3. VGA port
4. AUDIO port
5. Earphone port
6. Kensington Lock
2-1
ASUS LCD Monitor VA229H
2.1 Detaching the arm/stand (for VESA wall
mount)
The detachable stand of this monitor is specially designed for VESA wall
mount.
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Use your ngers to loosen the screw located at the bottom of the
base, and remove the base from the stand.
3. Or you may directly use a screwdriver to remove the screws that
secure the stand to the monitor, and detach the stand from the
monitor.
• We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• Hold the stand while removing the screws.
2
3
1
4
• The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load 22.7kg
(Screw size: M4 x 10 mm).
2-2 Chapter 2: Setup
2.2 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
• Hold the stand to prevent the monitor from falling while changing its
angle.
• You can adjust the monitor’s angle from -5˚ to 20˚.
-5 ~ 20
3-1
ASUS LCD Monitor VA229H
3.1 OSD (On-Screen Display) menu
3.1.1 Howtorecongure
Reading Mode
Darkroom Mode
Splendid
Scenery Mode
sRGB Mode
Game Mode
Night View Mode
Theater Mode
Standard Mode
S
RGB Mode VGA 1920x1080@60Hz
ASUS VA229
1. Press the MENU button to activate the OSD menu.
2. Press - and + to navigate through the functions. Highlight and activate
the desired function by pressing the MENU button. If the function
selected has a sub-menu, press - and + again to navigate through
the sub-menu functions. Highlight and activate the desired sub-menu
function by pressing the MENU button.
3. Press - and + to change the settings of the selected function.
4. To exit the OSD menu, press the AUTO button. Repeat step 2 and
step 3 to adjust any other function.
3.1.2 OSD Function Introduction
1. Splendid
This function contains eight-functions that you can select for your
preference. Each mode has the Reset selection, allowing you to
maintain your setting or return to the preset mode.
Reading Mode
Darkroom Mode
Splendid
Scenery Mode
sRGB Mode
Game Mode
Night View Mode
Theater Mode
Standard Mode
S
RGB Mode VGA 1920x1080@60Hz
ASUS VA229
3-2 Chapter 3: General Instruction
• Standard Mode: This is the best choice for document editing with
SplendidPlus Video Intelligence Technology.
• sRGB Mode: This is the best choice for viewing photos and graphics
from PCs.
• Scenery Mode: This is the best choice for scenery photo displaying with
SplendidPlus Video Intelligence Technology.
• Theater Mode: This is the best choice for movie watching with
SplendidPlus Video Intelligence Technology.
• Game Mode: This is the best choice for game playing with SplendidPlus
Video Intelligence Technology.
• Night View Mode: This is the best choice for playing dark-scene game
or watching dark-scene movie with SplendidPlus Video Intelligence
Technology.
• Reading Mode: This is the best choice for book reading with
SplendidPlus Video intelligence Technology.
• Darkroom Mode: This is the best choice for a weak ambient light
environment with SplendidPlus Video intelligence Technology.
• In the Standard Mode, the Saturation, SkinTone, Sharpness, and ASCR
functions are not user-configurable.
• In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness, Brightness,
Contrast and ASCR functions are not user-configurable.
2. Blue Light Filter
Adjust the energy level of blue light emitted from LED backlight.
Blue Light Filter
Level 2
Level 1
Level 4
Level 3
Level 0
S
RGB Mode VGA 1920x1080@60Hz
ASUS VA229
• Level 0: No change.
• Level 1~4: The higher the level,the more blue light will be reduced.
3-3
ASUS LCD Monitor VA229H
• When Blue Light Filter is activated,the default settings of Standard Mode will
be automatically imported.
• Between Level 1 to Level 3, the Brightness function is user-configurable.
• Level 4 is optimized setting. It is compliance with TUV Low Blue Light
Certification. The Brightness function is not user-configurable.
3. Color
Select the image color you like from this function.
VA229
AUTO : EXIT MENU : Enter
-
+ : Move
/
Color
S
RGB Mode VGA 1920x1080@60Hz
ASUS VA229
Brightness
Contrast
Saturation
Color Temp.
Skin Tone
• Brightness: The adjusting range is from 0 to 100.
• Contrast: The adjusting range is from 0 to 100.
• Saturation: The adjusting range is from 0 to 100.
• Color Temp.: Contains three preset color modes (Cool, Normal, Warm)
and one User Mode.
• Skin Tone: Contains three color modes including Reddish, Natural, and
Yellowish.
• In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0 ~ 100.
4. Image
You can adjust the image Sharpness, Trace Free, Aspect Control,
ASCR, Position (VGA only), and Focus (VGA only) from this main
function.
3-4 Chapter 3: General Instruction
VA229
Image
S
RGB Mode VGA 1920x1080@60Hz
ASUS VA229
Focus
Sharpness
Trace Free
ASCR
Position
Aspect Control
Vividpixel
Auto Adjust
• Sharpness: Adjusts the picture sharpness. The adjusting range is from 0
to 100.
• Trace Free: Speeds up the response time by Over Drive technology. The
adjusting range is from lower 0 to faster 100.
• Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”,“Overscan”.
• Vividpixel: ASUS Exclusive Technology that brings lifelike visuals for
crystal-clear and detail-oriented enjoyment. The adjusting range is from
0 to 100.
• ASCR: Select ON or OFF to enable or disable dynamic contrast ratio
function.
• Position: Adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100
(Only available for VGA input).
• Focus: Reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100 (Only available for VGA input).
• AUTO Adjust: Automatically adjust the image to its optimized position,
clock, and phase. (Only available for VGA input.)
• 4:3 is only available when input source is in 4:3 format. OverScan is only
available for the HDMI input source.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
5. Sound
Adjust the sound settings to your preference.
3-5
ASUS LCD Monitor VA229H
VA229
Sound
S
RGB Mode VGA 1920x1080@60Hz
ASUS VA229
Mute
Source
Volume
• Volume: Adjusts the output volume level.
• Mute: Mute: the output volume.
• Source: Adjusts audio source to “Line In” or “HDMI” (only available for
HDMI input).
6. Input Select
Use this hotkey to switch from VGA, HDMI input signals.
VA229
Input Select
S
RGB Mode VGA 1920x1080@60Hz
ASUS VA229
VGA
HDMI
7. System Setup
Adjusts the system conguration.
System Setup
S
RGB Mode VGA 1920x1080@60Hz
ASUS VA229
Splendid Demo Mode
Language
Key Lock
GamePlus
ECO Mode
OSD Setup
QuickFit
More
3-6
ASUS LCD Monitor VA229H
VA229
System Setup
SRGB Mode VGA 1920x1080@60Hz
ASUS VA229
Back
Information
Power Key Lock
All Reset
Power Indicator
• Splendid Demo Mode: Activate the demo mode for the Splendid function.
• GamePlus: The GamePlus Function provides a toolkit and creates abetter
gaming environment for users when playing different types of games.
Particularly, Aimpoint function is specially designed for new gamers or
beginners interested in First Person Shooter (FPS) games.To active
GamePlus:
• Select ON to enter the GamePlus main menu.
• Press and to select between Aimpoint and Timer function.
• Press to confirm the function you choose. Press to go back. Press
to go off, and exit.
GamePlus main menu GamePlus-Crosshair
Crosshair Timer
GamePlus
(Practice Mode)
GamePlus main-Timer GamePlus main-Timer-Position
Position
3-7
ASUS LCD Monitor VA229H
• QuickFit： contains three patterns: (1) Grid (2) Paper size (3) Photo
size.
1. Grid pattern: Facilitates designers and users to organize
content and layout on one page and achieve a consistent
look and feel.
Alignment Grid 2Alignment Grid 1
2. Photo size: Provides photographers and other users to
accurately view and edit their photos in real size on the
screen.
3x5 2x2
4x6
• ECO Mode: Activate the ecology mode for power saving.
• OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of
the OSD screen.
• Language: Select OSD language. The selections are: English, French,
German, Spanish, Italian, Dutch, Russian, Traditional Chinese,
Simplified Chinese, Japanese, Persian, Thai, Indonesian, Poland,
Turkey, Portugal, Czech, Croatia, Hungary, Romania, and Korean.
• Key Lock: To disable all function keys. Press the MENU button over five
seconds to cancel the key lock function.
• More:Return the next page of System Setting.
• Back:Return the previous page of System Setting.
• Information: Displays the monitor information.
• Power Indicator: Turn the power LED indicator on/off.
• Power Key Lock: To disable / enable power key
• All Reset: Selects “Yes” to revert all settings to the factory default mode.
3-8 Chapter 3: General Instruction
3.2 Specications
Model VA229H
Panel Size 21.5” W (54.61 cm)
Max. Resolution 1920 x 1080
Brightness (Typ.) 250cd/m
2
Intrisinc Contrast Ratio (Typ.) 1000:1
Viewing Angle (CR≤10) 178°(V); 178°(H)
Display Colors 16.7 M
Response Time (Typ.) 5 ms (Gray to Gray)
D-Sub input Yes
HDMI input Yes
Power ON Consumption ＜26 W（typ）
Power saving mode < 0.5 W
Power off mode < 0.5 W
Tilt -5° ~ +20°
VESA Wall Mounting Yes (100mm x 100mm)
Phys. Dimension (WxHxD) 499.5 x 371.7 x 199.5 mm
Box Dimension (WxHxD) 566 x 124 x 442 mm
Net Weight (Esti.) 3.6 kg
Gross Weight (Esti.) 5.1 kg
Voltage Rating AC 100~240V(Built-in)
*Specicationsaresubjecttochangewithoutnotice.
3-9
ASUS LCD Monitor VA229H
3.3 Troubleshooting (FAQ)
Problem Possible Solution
Power LED is not ON • Press the button to check if the monitor is in the
ON mode.
• Check if the power cord is properly connected to
the monitor and the power outlet.
The power LED lights amber and
there is no screen image
• Check if the monitor and the computer are in the
ON mode.
• Make sure the signal cable is properly connected
the monitor and the computer.
• Inspect the signal cable and make sure none of the
pins are bent.
• Connect the computer with another available
monitor to check if the computer is properly
working.
Screen image is too light or dark • Adjust the Contrast and Brightness settings via
OSD.
Screen image is not centered or
sized properly
• Press the
-
or
+
button for two seconds to
automatically adjust the image.
• Adjust the H-Position or V-Position settings via
OSD.
Screen image bounces or a wave
pattern is present in the image
• Make sure the signal cable is properly connected to
the monitor and the computer.
• Move electrical devices that may cause electrical
interference.
Screen image has color defects
(white does not look white)
• Inspect the signal cable and make sure that none of
the pins are bent.
• Perform Reset via OSD.
• Adjust the R/G/B color settings or select the Color
Temperature via OSD.
Screen image is blurry or fuzzy • Press the
-
or
+
button for two seconds to
automatically adjust the image (for VGA mode
only).
• Adjust the Phase and Clock settings via OSD.
3-10
ASUS LCD Monitor VA229H
3.4 Supported Timing List
VESA / IBM Modes Support Timing
Resolution Refresh Rate Horizontal Frequency
640 x 350 70Hz 31.469KHz
640 x 480 60Hz 31.469KHz
640 x 480 67Hz 35KHz
640 x 480 75Hz 37.5KHz
720 x 400 70Hz 31.469KHz
800 x 600 56Hz 35.156KHz
800 x 600 60Hz 37.879KHz
800 x 600 72Hz 48.077KHz
800 x 600 75Hz 46.875KHz
848 x 480 60Hz 31.02KHz
1024 x 768 60Hz 48.363KHz
1024 x 768 70Hz 56.476KHz
1024 x 768 75Hz 60.023KHz
1152 x 864 75Hz 67.5KHz
1280 x 720 60Hz 44.772KHz
1280 x 800 60Hz 49.702KHz
1280 x 960 60Hz 60KHz
1280 x 1024 60Hz 63.981KHz
1280 x 1024 75Hz 79.976KHz
1366 x 768 60Hz 47.712KHz
1440 x 900 60Hz 55.935KHz
1680 x 1050 60Hz 65.29KHz
1680 x 1050 60Hz 64.674KHz
1920 x 1080 60Hz 67.5KHz
1920 x 1080 60Hz 66.587KHz
* The modes not listed in the above tables may not be supported. For optimal resolution, we
recommend that you choose a mode listed in the above tables.