ATEN IC108S User Manual
Displayed below is the user manual for IC108S by ATEN which is a product in the Interface Cards/Adapters category. This manual has pages.
Related Manuals
User Manual
IC-102S
IC-104S
IC-108S
Read this guide thoroughly and follow the installation and operation
procedures carefully in order to prevent any damage to the units and/or
any devices that connect to them.
This package contains:
M1 RS-232 PCI Card (IC-102S or IC-104S or IC-108S)
M1 User Manual
If anything is damaged or missing, contact your dealer.
© Copyright 2003 ATEN® International Co., Ltd.
Printed in Taiwan 12/2003
All brand names and trademarks are the registered property of their respective owners.
2004-09-22
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy, and if not installed and
used in accordance with the instruction manual, may cause
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
MReorient or relocate the receiving antenna;
MIncrease the separation between the equipment and
receiver;
MConnect the equipment into an outlet on a circuit dif ferent
from that which the receiver is connected;
MConsult the dealer or an experienced radio/television
technician for help.
2004-09-22
Limited Warranty
IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY EXCEED
THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS
DOCUMENTATION.
The direct vendor makes no warranty or representation, expressed,
implied, or statutory with respect to the contents or use of this
documentation, and especially disclaims its quality, performance,
merchantability, or fitness for any particular purpose.
The direct vendor also reserves the right to revise or update the device
or documentation without obligation to notify any individual or entity of
such revisions, or update. For further inquiries, please contact your
direct vendor.
2004-09-22
Notes:
2004-09-22
IC-102S
2 Port RS-232
PCI card
- 1 -
2004-09-22
Packing Checklist
This package contains:
M1 IC-102S 2 Port PCI Card
M1 CDROM (Hardware Guide and Software Driver)
M1 User Manual
Overview
The IC-102S 2 port serial PCI card provides two 9 pin male
connectors for the attachment of standard serial int erf ace
peripheral units. It comes equipped with two High-Speed
RS-232 standard serial interface ports. Each port has 32 Byt es
of FIFO storage capacity and can attain speeds of up to 921
Kbps. The IC-102S is also plug and play enabled and will
support: NT 4, 98/ME, Win 2000, XP and Linux.
Hardware Installation
1. Power off your computer.
2. Plug the card into any available PCI bus slot.
3. Connect your peripherals (printer, modem, scanner, et c. ) to
the card’s serial ports.
4. Power on your computer.
- 2 -
2004-09-22
Pin Assignments
Pin Assignment
1DCD
2RD
3TD
4DTR
5GROUND
6DSR
7RTS
8CTS
9RI
Technical Specifications
Function Specification
Connectors 2 x 9 pin D-Sub male
Speed Up to 921 KB/sec.
Storage Capacity 32 Byte FIFO
- 3 -
2004-09-22
Troubleshooting
Problem Solution
Computer returns an error
when booting up Try a different slot.
Clean the slot contacts.
Clean the card contacts.
If these don’t remedy the problem, contact your dealer for
further assistance.
- 4 -
2004-09-22
IC-104S
4 Port RS-232
PCI Card
- 1 -
2004-09-22
Packing List
This package contains:
M1 IC-104S 4 Port PCI Card
M4 port DB9 Connector Cable
M1 CDROM (Hardware Guide and Software Driver)
M1 User Manual
Overview
The IC-104S 4 port serial PCI card provides one 37 pin to four
DB9 cables for the attachment of standard serial interf ace
peripheral units. Each port has 32 Bytes of FIFO storage
capacity and can attain speeds of up to 921 Kbps. The IC-104S
is also plug and play enabled and will support Win 95, 98, NT,
2000 and Linux.
Hardware Installation
1. Power off your computer.
2. Plug the card into any available PCI bus slot.
3. Plug the 4 port DB9 connector cable into the card’s 37 pin
connector.
4. Connect your peripherals (printer, modem, scanner, et c. ) to
the cable’s serial ports.
5. Power on your computer.
- 2 -
2004-09-22
Pin Assignments
Pin Assignment
1DCD
2RD
3TD
4DTR
5GROUND
6DSR
7RTS
8CTS
9RI
Technical Specifications
Function Specification
Connectors 4 x 9 pin D-Sub male
Speed Up to 921 KB/sec.
Storage Capacity 32 Byte FIFO
- 3 -
2004-09-22
Troubleshooting
Problem Solution
Computer returns an error
when booting up Try a different slot.
Clean the slot contacts.
Clean the card contacts.
If these don’t remedy the problem, contact your dealer for
further assistance.
- 4 -
2004-09-22
IC-108S
8 Port RS-232
PCI Card
- 1 -
2004-09-22
Packing List
This package contains:
M1 IC-108S 8 Port PCI Card
M2 x 4 Port DB9 Connector Cables
M1 CDROM (Hardware Guide and Software Driver)
M1 User Manual
Overview
The IC-108S 8 port serial PCI card provides two 37 pin to four 9
pin DB9 connectors. Each port has 32 Bytes of FIFO st orage
capacity and can attain speeds of up to 921 KB/sec. The
IC-108S is also plug and play enabled and will support Win 3.1,
NT 4, 98/ME, Win 2000, XP, DOS and Linux.
Hardware Installation
1. Power off your computer.
2. Plug the card into any available PCI bus slot.
3. Plug the 4 port DB9 connector cable into the card’s 37 pin
connector.
4. Connect your peripherals (printer, modem, scanner, et c. ) to
the cable’s serial ports.
5. Power on your computer.
- 2 -
2004-09-22
Pin Assignments
Pin Assignment
1DCD
2RD
3TD
4DTR
5GROUND
6DSR
7RTS
8CTS
9RI
Technical Specifications
Function Specification
Connectors 8 x 9 pin D-Sub male
Speed Up to 921 KB/sec.
Storage Capacity 32 Byte FIFO
- 3 -
2004-09-22
Troubleshooting
Problem Solution
Computer returns an error
when booting up Try a different slot.
Clean the slot contacts.
Clean the card contacts.
If these don’t remedy the problem, contact your dealer for
further assistance.
- 4 -
2004-09-22