ATEN UH3232-AT-G User Manual
Displayed below is the user manual for UH3232-AT-G by ATEN which is a product in the Interface Hubs category. This manual has pages.
Related Manuals
UH3232
USER MANUAL
USB-C Multiport Mini Dock
EMC Information
Federal Communication Commission Interference Statement: This equipment has
been tested and found to comply with the limits for a Class B digital service,
pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s
authority to operate this equipment. This equipment generates, uses, and can
radiate radio frequency energy. If not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and receiver;
Connect the equipment into an outlet on a circuit different from that which the
receiver is connected;
Consult the dea l er /an experience d radio/television technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
KCC Statement
이 기기는 가정용 (B 급 ) 전자파적합기기로서 주로 가정에서 사용하는
것을 목적으로 하며 , 모든 지역에서 사용할 수 있습니다 .
RoHS
This product is RoHS compli ant.
- 3 -
UH3232 User Manual
Online Registration
Telephone Support
Technical Support
For international online technical support – including
troubleshooting, documentation, and software updates:
http://eservice.aten.com
For North American technical support:
International http://eservice.aten.com
International 886-2-8692-6959
China 86-400-810-0-810
Japan 81-3-5615-5811
Korea 82-2-467-6789
North America 1-888-999-ATEN ext 4988
United Kingdom 44-8-4481-58923
Email Support support@aten-usa.com
Online
Technical
Support
Troubleshooting
Documentation
Software Updates
http://support.aten.com
Telephone Support 1-888-999-ATEN ext 4998
- 4 -
Package Contents
The UH3232 USB-C Multiport Mini Dock package contains the
following items:
1 UH3232 USB-C Multiport Mini Dock
1 User Instructions*
Check to make sure that all the components are present and that
nothing got damaged in shipping. If you encounter a problem,
contact your dealer.
Read this manual thoroughly and follow the installation and
operation procedures carefully to prevent any damage to the unit,
and/or any of the devices connected to it.
*Features may have been added to the UH3232 since this
manual was printed. Please visit our website to download the
most up-to-date version of the manual.
Copyright © 2017 ATEN® International Co., Ltd.®
Manual Date: 2017-08-08
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights
reserved. All other trademarks are the property of their respective owners.
- 5 -
Overview
The UH3232 USB-C Multiport Mini Dock connects a computer to
an Ethernet, HDMI, VGA and USB Type-A port, through a single
built-in USB-C cable. The 4 in 1 adapter instantly links your USB-
C or Thunderbolt™ 3 computer to an HDMI or VGA display, USB
peripheral and Ethernet cable for quick and easy desktop
docking. The 6-layer PCBA design reduces signal distortion and
interference for uninterrupted video that is always crisp and
sharp, and a Gigabit Ethernet port delivers Internet speeds up to
one Gigabit (100 0 Mbps).
The UH3232 plugs directly into the USB-C port and does not
require any software installation. A built-in billboard feature
actively communicates with the connected computer to ensure
seamless compatibility with connected devices. This means that
when the UH3232 is connected to a computer and a device with
an incompatible alternate mode is connected, it alerts you with
support details, instead of failing in silence.
The UH3232 USB-C Multiport Mini Dock is ideal for displaying
video content on HDMI or VGA monitors at work, school or home.
It allows you to add an additional monitor for enhanced
multitasking, gaming and viewing of movies or photos in high
definition. The lightweight compact design is perfect as a portable
companion for your USB-C enabled device to dock anywhere.
- 6 -
Features
Connects a USB-C or Thunderbolt™ 3 computer to an HDMI /
VGA display, Ethernet cable and USB T y pe-A peripheral
USB 3.1 Gen 1 port with data transfer rates up to 5 Gbps
Superior video resolutions up to 3840 x 2160 @ 30 Hz
(HDMI) or 2048 x 1152 @ 60 Hz (VGA)
Supports HDMI 1.4b @ 4K (UHD) resolutions
Gigabit Ethernet port
- 7 -
System Requirements
Hardware
1 USB-C enabled computer
Software
Windows® 10 (32-bit / 64-bit) and above
Mac OS X 10.12 and later*
- 8 -
Components
UH3232
No. Component Description
1 USB-C Cable This cable connects to a USB-C enabled computer.
2 Gigabit LAN Port Plug an Ethernet cable into this port to provide a network
connection.
3 USB 3.1 Gen 1
Port Plug a USB 3.0/2.0/1.1 peripheral device to this port.
4 VGA Port The cable from a VGA display plugs into this port.
5 HDMI Port The cable from an HDMI display plugs into this port.
Front
2435
1
Top
- 9 -
Installation
Hardware
To setup the UH3232, use the diagram on the next page (the
numbers in the diagram correspond with the numbered
instructions below), and do the following:
1. Connect the UH3232's USB-C cable to a USB-C enabled
computer.
2. Plug an Ethernet cable to the Gigabit LAN port.
3. Use a USB cable to connect a USB 3.0/2.0/1.1 peripheral
device to the USB 3.1 Gen 1 po rt .
4. Connect an HDMI or VGA monitor* to its respective port on
the UH3232.
Note: Only connect one monitor at time to the UH3232. If you
connect both a VGA and HDMI monitor to the UH3232,
the HDMI port will have priority to display video.
1. Make sure that the power to any device that you
connect to the installation has been turned off.
2. Make sure that all devices you will be installing are
properly grounded.
- 10 -
1
432
or
- 11 -
Configuration and Settings
Support VGA Resolutions
Support HDMI Resolutions
Horizontal Vertical Frame Rate
2048 1152 60 Hz
1920 1080 60 Hz
1366 768 60 Hz
1360 768 60 Hz
1280 768 60 Hz
1280 720 60 Hz
1024 768 60 Hz
Horizontal Vertical Frame Rate
3840 2160 30 Hz
2560 1440 60 Hz
2560 1600 60 Hz
1920 1080 60 Hz
- 12 -
Specifications
Function UH3232
Computer Connections 1
Connectors
Computer 1 x USB-C Male (Black)
Device 1 x USB 3.1 Gen 1 Type A Female (Blue)
Video Output 1 x HDMI Female (Black)
1 x VGA Female (Black)
LAN 1 x Gigabit Ethernet Female (Black)
Video Resolution
Single View HDMI 3840 x 2160 @ 30 Hz
VGA 2048 x 1536 @ 60 Hz
Power
Consumption DC5V, 7.365W
Environmental
Operating Temperature 0–40º C
Storage Temperature -20–60º C
Humidity 0–80% RH, Non-condensing
Physical Properties
Housing Plastic
Weight 0.07 kg
Dimensions (L x W x H) 15.88 x 10.80 x 1.52 cm
- 13 -
Limited Hardware Warranty
ATEN warrants its hardware in the cou ntry of purchase against flaws in mater ials
and workmanship for a Warranty Pe riod of two [2] years (warranty period may
vary in certain regions/countries) commencin g on the date of original purchase.
This warranty period includes the LCD panel of ATEN LCD KVM switches. Select
products are warranted for an additional year (see A+ Warranty for further
details). Cables and accessories are not covered by the Standard Warranty.
What is covered by the Limited Hardware Warranty
ATEN will provide a repair service, without charge, during t he Warranty Period. If
a product is defective, ATEN will, at its discretion, have the option to (1) repair
said product with new or repaired components, or (2) replace the entire product
with an identical produ ct o r with a similar product which f ulfills the same f un ction
as the defective produ ct. Replaced products assume the warranty of the origi nal
product for the rema ining period or a period of 90 days, whichever is longer.
When the products or components are replaced, the replacing articles shall
become customer proper ty and the replaced articles shall be come the property of
ATEN.
To learn more about our warranty policies, please visit our website:
http://www.aten.com/global/en/legal/policies/warranty-policy/