Table of Contents
ATEN VE-RMK3U User Manual
Displayed below is the user manual for VE-RMK3U by ATEN which is a product in the Rack Accessories category. This manual has pages.
Related Manuals
Video Extender Rack Mount Kit
VE-RMK3U
Installation:
1. (A) Position the VE-RMK3U Frame on the front of the rack and align the holes in the mounting brack-
ets with the holes in the rack, then screw the mounting brackets to the rack. Rack screws are not
provided. (B) Remove the two screws to detach the center brace.
AB
2. Place the Video Extender over the 3U Mounting Plate and bring the two pieces together so that the
mounting post enters the rear hole. Next, slide the Video Extender forward to lock it in place. For video
extenders without brackets, see step 4.
Package Contents:
User Instructions
1 x VE-RMK3U Frame
12 x 3U Mounting Plates
26 x Plastic Captive Screws
18 x Hexagon Head Screws
36 x Countersunk Head Screws
The VE-RMK3U kit provides a mounting frame and accessories to install
12 ATEN Video Extenders in 3U of rack space. Compatible with ATEN
models VE800A, VE803, VE810, VE600A, VE602, VE560, CE100, VE601,
and VE801.
Video Extender Rack Mount Kit
VE-RMK3U
M3X4 Hexagon
Head Screw
3. Screw the video extender's mounting bracket
to the mounting plate.
4. If the video extender doesn't have a mounting
bracket, align the bottom holes and then screw
the video extender to the mounting plate.
M3X5 Countersunk
Head Screws
Plastic Captive
Screws
5. Slide a 3U Mounting Plate with video extender attached onto a slot in the VE-RMK3U Frame, align-
ing the screw holes and fitting the notches. Secure the mounting plate to the frame with two Plastic
Captive Screws. Repeat the process with each video extender.
User Instructions