Beko B3T4823DG User Manual

Displayed below is the user manual for B3T4823DG by Beko which is a product in the Tumble Dryers category. This manual has pages.

Related Manuals

Beko BDIN36520Q Manual

Beko BDFN26430X Manual

Beko BDI6C65K Manual

Beko CIHYG32SXE Manual

Beko EDVC503S Manual

Beko HSA 13520 Manual

Beko HSA 24520 Manual

Beko HSA 37540 Manual

B3T4823DW

Dryer

User Manual

2 9 6 0 3 1 3 0 5 4 _ E N / 07-07-21.(11:45)

Dear Customer,

Please read these instructions first before using your appliance

Thank you for choosing a Beko appliance.

Please take some time to read this user manual before using your appliance, to ensure you know

how to safely operate the controls and functions.

Carefully follow all unpacking and installation instructions to ensure the appliance is correctly

connected and fitted prior to use.

Please write your product model and serial number on the last page of this user manual, and store

in a safe location close to the appliance for easy future reference.

This user manual may also be applicable for several other models. Differences between models

will be listed.

If you have any questions or concerns, please call our contact centre or find help and information

online at www.beko.co.uk

Explanation of symbols used throughout this User Manual

The following symbols are used in the user guide:

Danger that may cause death or injury

Read the manual.

Important information or useful usage tips

Warning against hot surfaces

BWarning against electric shock

Warning against UV Radiation hazard

Warning against scalding

The product's packaging is made of recyclable materials, in accordance with the

National Environment Legislation.

Warning against fire

NOTICE Danger that may cause material damage on the product or surrounding area

This product was manufactured using the latest technology in environmentally friendly conditions.

Dryer / User manual

Table Of Contents

1 Safety Instructions ............................................................................. 5

1.1 Intended use .....................................................................................................5

1.2 Safety of children, vulnerable persons and pets .................................................5

1.3 Electrical Safety .................................................................................................6

1.4 Transporting safety ............................................................................................7

1.5 Installing safety ..................................................................................................7

1.6 Usage safety .....................................................................................................9

1.7 Maintenance and cleaning safety .....................................................................10

1.8 Lighting safety .................................................................................................11

1.9 Steam program safety .....................................................................................12

2 Environmental instructions................................................................. 13

2.1 Compliance with the WEEE Regulations and Waste Disposal ..........................13

2.2 Packaging information .....................................................................................13

2.3 Standard conformity and test information / EU declaration of conformity .........13

3 Your drying machine ........................................................................... 14

3.1 Technical specifications ...................................................................................14

3.2 General appearance ........................................................................................15

3.3 Scope of delivery .............................................................................................15

4 Installation .......................................................................................... 16

4.1 Right place for installation ................................................................................16

4.2 Removing the shipping safety group 16

4.3 Water connection ............................................................................................17

4.4 Adjusting the stands ........................................................................................17

4.5 Moving the drying machine .............................................................................. 17

4.6 Warning regarding the noise ............................................................................17

4.7 Replacing the lighting bulb ............................................................................... 17

5 Preparation ......................................................................................... 18

5.1 Laundry suitable for drying in drying machine ..................................................18

5.2 Laundry not suitable for drying in drying machine ............................................18

5.3 Preparing the laundry to be dried ..................................................................... 18

5.4 What to do for energy saving ...........................................................................18

5.5 Correct load capacity ......................................................................................19

4 Dryer / User manual

6 Running the product .......................................................................... 20

6.1 Control Panel ................................................................................................... 20

6.2 Symbols ..........................................................................................................20

6.3. Preparation of drying machine ........................................................................20

6.4 Program selection and consumption chart ....................................................... 21

6.5 Auxiliary functions ............................................................................................23

6.6 Warning indicators ........................................................................................... 23

6.7 Starting the program ........................................................................................24

6.8 Child Lock .......................................................................................................24

6.9 Changing the program after it is started ...........................................................24

6.10 Cancelling the program ..................................................................................25

6.11 End of program .............................................................................................25

6.12 Odour feature ................................................................................................25

6.13 SteamCure Odour and Wrinkle Removal Function .........................................25

7 Maintenance and cleaning ................................................................ 27

7.1 Fibre Filters (internal and external filters) / Cleaning of the Interior Surface of the

Loading Door ........................................................................................................27

7.2 Cleaning the sensor ........................................................................................ 28

7.3 Emptying the water tank ..................................................................................29

7.4 Cleaning the condenser ................................................................................... 29

8 Troubleshooting ................................................................................. 31

9. Electrical Connection ......................................................................... 33

9.1 Attention! ......................................................................................................... 33

9.2 Electrical requirements .....................................................................................33

9.3 Fitting a different plug .....................................................................................33

Dryer / User manual

1 Safety Instructions

This section includes the safety instructions necessary to prevent the

risk of personal injury or material damage.

• Our company shall not be held responsible for damages that may occur

if these instructions are not observed.

• Installation and repair operations shall always be performed by

Authorized Service.

• Use original spare parts and accessories only.

• Do not repair or replace any component of the product unless it is

clearly specified in the operation manual.

• Do not modify the product.

1.1 Intended use

• Product is designed only for household use. It is not intended for

commercial use.

• The product is not designed for outdoor use.

• Do not install or operate the product where freezing is a possibility and/

or vulnerable to external elements. Water frozen in the pump or the

hoses may cause damages

• Product can only be used to dry and ventilate laundry which are washed

with water and drying machine safe.

1.2 Safety of children, vulnerable persons and pets

• This product may be used by children aged 8 years and older and

persons with underdeveloped physical, sensory or mental capabilities or

lack of experience and knowledge if they have been given supervision

or instruction concerning use of the appliance in a the product safe way

and the hazards involved. Children should not tamper with the device.

Cleaning and maintenance should not be carried out by children unless

they are supervised.

• Children under 3 years old shall be kept away from the product unless

supervised.

6 Dryer / User manual

• Electrical products are dangerous for children and pets. Children and

pets shall not play with the product, climb on or get inside the product.

• Keep the product door closed even when not operated. Children or

pets could be locked inside the product and suffocate.

• Cleaning and user maintenance operations must not be performed by

children unless supervised.

• Keep the packaging materials away from children. Risk of injury and

suffocation.

• Keep all additives used with the product away from children.

• Before disposing of the product, cut the power cord and destroy the

loading door.

1.3 Electrical Safety

• The product must not be plugged in during installation, maintenance,

cleaning, repair and transporting operations.

• If the power the cord is damaged, it shall be replaced by authorized

service to avoid any risk that may occur.

• Do not tuck the power cord under the product or to the rear of the

product. Do not put heavy items on the power cord. Power cord shall

not be kinked, pinched and shall not come in contact with any heat

source.

• Do not use an extension cord, multi-plug or adaptor to operate your

product.

• The product shall not be powered via an external switch such as a timer

or shall not be connected to a circuit that is regularly opened and closed

with a tool.

• The plug shall be easily accessible. If this is not possible, a mechanism

that meets the electrical legislation and that disconnects all terminals

from the mains (fuse, switch, main switch, etc.) shall be available on the

electrical installation.

• Do not touch the plug with wet hands.

• When unplugging the appliance, don’t hold the power cord, but the

plug.

Dryer / User manual

1.4 Transporting safety

• Unplug the product prior to transport, empty the water tank and if any,

remove the water drain connections.

• This product is heavy, do not handle it by yourself.

• Take required precautions for the product against falling and tipping. Do

not crash or drop the product when transporting.

• Do not use the extruding parts of the product (such as the loading door)

to move the product.

• Move the product in upright position. If it cannot be moved upright,

transport via tilting to the right side when viewed from the front.

1.5 Installing safety

• To prepare the product ready for installation, ensure that the electrical

installation and water drain is proper by checking the information in the

user manual. If it is not suitable for installation, call a qualified electrician

and plumber to arrange the utilities as necessary. These operations shall

be undertaken by the customer.

• Check for any damage on the product before installing it. Do not have

the product installed if it is damaged.

• Do not remove the adjustable stand.

• Place the product on a level and hard surface and balance with the

adjustable legs.

• The gap between the product and the floor shall not be reduced via

materials such as rugs, pieces of wood and bands. The ventilation holes

under the base of the product shall not be clogged with a rug.

• The product shall be installed not to clog the ventilation holes.

• Install the product in an environment free of dust with good ventilation.

• Do not install the product in close proximity to flammable and explosive

materials and do not keep flammable and explosive materials near the

product when it is in operation.

• The product shall not be installed against a door, sliding door where the

product loading door cannot be completely opened, or behind a hinged

door where the product hinge is faced against the door’s hinges.

8 Dryer / User manual

• Install the product where periodic maintenance and cleaning can be

done with ease.

• Place the product with its back surface to the wall (for heater models).

• After placing the product, ensure that the back wall does not come in

contact with any extrusion (a water tap, electrical outlet etc.).

• Place the product with at least 1 cm space between the product and

the furniture edges.

• Follow the flue connection rules specified in the guide (for models with

flue).

• The exhaust air shall not be directed to flue which is used to exhaust the

smoke of devices that consume gas or other fuels (for models with flue).

• The ventilation hose shall not be connected to a heating stove or a

chimney flue (for models with flue).

• Plug the product to a grounded outlet protected with an appropriate

fuse in align with the specified type and current rates. Have an expert

electrician set grounding equipment. Do not use the product without a

grounding conforming with regional/national regulations.

• Plug the product in a grounded socket that conforms with the voltage,

current and frequency values specified in the type label.

• Do not plug the product to loose, broken, dirty, greasy sockets or

sockets that has come out their seats or sockets with a risk of water

contact.

• The new hose sets supplied with the product shall be used. Do not re-

use the old hose sets. Do not make attachments to the hoses.

• Place the power cord and hoses not cause a risk of tripping over.

• To use the product on top of a washing machine, a fixing aperture shall

be used between two products. Fixing aperture shall be mounted by the

authorised service.

• When the product is placed on the washing machine, their combined

weight when full could be around 180 kg. Place the products on a

sturdy floor that can carry adequate amount of load.

• Washing machine cannot be placed on top of the drying machine.

Dryer / User manual

Suitable Instalment Table for Washing Machine and Drying Machine

Connection Kit Type Depth Measurement (DM: Drying

Machine, WM: Washing Machine)

Plastic - 54/60 cm (with/without arch) DM ≤ WM

DM - WM = max. 10 cm

Plastic - 46cm (with/without arch) DM ≤ WM

DM - WM = max. 10 cm

With Shelves - 60 cm DM ≤ WM

With Shelves - 54cm DM ≤ WM

1.6 Usage safety

• The maximum weight of dry laundry prior to washing is specified in

“Technical Specifications” section.

• Do not place the unwashed items in the drying machine.

• Items that are soiled with materials such as cooking oils, acetone,

alcohol, petrol, kerosene, stain removers, turpentine, wax or was

removers shall be washed in hot water with more amount of detergent

prior to drying with the drying machine.

• If chemicals are utilized for cleaning, the drying machine shall not be

used.

• Rubber foam (latex foam), shower bonnets, water resistant textiles,

rubber supported materials and clothes, pillows with rubber foam pads

shall not be dried in a drying machine.

• The items with hair spray, hair product residue or similar materials shall

not be dried in a drying machine.

• Empty the pockets of the clothes and remove items such as matches

and lighters.

• If all items cannot be removed rapidly and cannot be placed where

heat can dissipate, do not stop the drying machine before drying cycle

completed.

• The last part of the drying machine cycle is conducted without

heating (cooling cycle) in order to ensure that the items are kept at a

temperature that will not harm the items.

10 Dryer / User manual

• Laundry softeners or similar products shall be used in align with the

laundry softener instructions.

• Do not use the drying machine without the fibre filter.

• Do not allow fibre accumulation around the drying machine.

• To prevent back draft of gas in the room from the devices that consume

other fuels, including open fire, appropriate ventilation shall be provided

(for models with flue).

• Do not operate the product together with heaters such as gas heater

and a chimney. It may cause the flue to catch fire. (for models with flue)

• Do not lean or sit on the loading door when it is open, the product may

tip over.

• Do not get on the product.

• Do not place a source of flame (candles, cigarettes, etc.) on the product

or in the vicinity of it. Do not keep flammable/explosive materials.

• Do not touch the drum as it revolves.

• The back wall of the product will be hot during operation. Do not touch

the back side of the product during drying or after the drying process is

completed. (For models with heating)

• Do not touch the inner surface of the drum while adding or removing

clothes during a continuing program. The drum surface is hot.

• Do not press the buttons with sharp objects such as forks, knives, with

your nails etc.

• Do not operate the faulty or damaged product. Unplug the product (or

shut down the connected fuse) and call the authorized service.

• Unplug the product when not in use.

1.7 Maintenance and cleaning safety

• Do not wash the product by spraying or pouring water on it. Do not use

a pressure cleaner, steam cleaner, hose or pressurised gun to clean the

product.

• Do not use sharp or abrasive tools to clean the product.

Dryer / User manual

• Do not use materials such as household cleaning agents, soaps,

detergents, gas, gasoline, alcohol, wax, etc. to clean the product.

• The fibre filter shall be regularly cleaned. After each drying cycle, clean

the fibre filter and the inner surface of the loading door.

• Clean the fibre accumulation on the fins of the evaporator behind the

filter drawer with a vacuum cleaner. You can clean by hand, provided

you wear protective gloves. Do not try to clean with bare hands.

Evaporator fins may damage your hands. (For products with heat pump)

• Due to fire and explosion hazard, do not use solutions, cleaning

materials, steel wool or similar materials and tools to clean sensors.

• Clean the flue. (for models with flue)

• Do not drink the condensed water.

1.8 Lighting safety

• Contact an authorized service when you need to replace the LED/bulb

using for lighting (for products with lighting).

12 Dryer / User manual

1.9 Steam program safety

• Applicable to products with steam program.

• Steam programs only use distilled water or condensed water in the

water vessel of the machine. Do not use mains water or additives. When

using condensed water in the water vessel, it should be filtered and

cleared of fibres.

• Before putting laundry in a steam program, stains on it should be

removed.

• You may put laundry that is not dirty or stained but permeated with

unpleasant odour in deodorizing program.

• Do not use any dry cleaning set or additional material within a steam

program or any program.

• Do not open the door when steam programs are on. Hot water may be

expelled.

• Do not drink the pure water supplied with the product.

Dryer / User manual

2 Environmental instructions

2.1 Compliance with the WEEE Regulations and Waste Disposal

This product does not contain the dangerous and prohibited materials indicated in the

“Regulation on The Control of Waste Electrical and Electronic Equipment” published by

Ministry of Environment and Urbanisation of Republic of Turkey. Complies WEEE

Regulations. This product was manufactured from recyclable and reusable high quality

parts and materials. Therefore, do not dispose of this product with other domestic

wastes at the end of its life cycle. Take it to a collection point for electrical and electronic

equipment. You can ask your local administration about these collection points. You can help

protect the environment and natural resources by delivering the used products for recycling.

Also R290 is a flammable refrigerant. Therefore ensure that the system and pipes are

not damaged during operation and transportation.

Keep the product from heat sources, otherwise it may catch fire if damaged.

Do not dispose of the product by throwing it into fire.

2.2 Packaging information

The product’s packaging is made of recyclable materials, in accordance with the National

Legislation. Do not dispose the packaging waste with the household waste or other wastes,

dispose it to the packaging collection areas specified by local authorities.

2.3 Standard conformity and test information

/ EU declaration of conformity

The development, manufacturing and sales phases of this product is conducted in

conformity with the safety rules specified in all related instructions of the European

Union.

14 Dryer / User manual

3 Your drying machine

3.1 Technical specifications

* Min. height: Height with the adjustable stand closed.

Max. height: Height with the adjustable stand opened at maximum height.

** Weight of dry laundry before washing.

*** Data plate is under the door on the drying machine.

In order to increase the drying machine’s quality, the technical specifications may be

changed without prior notice.

Figures in this manual are schematic and may not exactly match the product.

The values provided with the drying machine or its accompanying documents are

laboratory readings in accordance with the respective standards. These values may

differ depending on the use and ambient conditions.

Height (Min. / Max.) 84,6 cm / 86,6 cm*

Width 59,8 cm

Depth 60,5 cm

Capacity (max.) 8 kg**

Net weight (± %10) 44 kg

Voltage

See type label***Rated power input

Model code

Dryer / User manual

3.2 General appearance

1. Top panel

2. Control panel

3. Loading door

4. Toe board handle

5. Ventilation grids

6. Adjustable feet

7. Toe board

8. Rating plate

9. Lint filter

10. Water tank drawer

11. Power cord

3.3 Scope of delivery

1. Water

discharge

hose*

6. Water

filling cap*

2. Filter

drawer

spare

sponge*

7. Pure

Water*

3. User

Manual

8. Odour

Capsule

Group*

4. Drying

basket* 9. Brush*

5. Drying

basket user

manual*

10. Filter

cloth*

*Optional - may not be included, depends on

model.

16 Dryer / User manual

4 Installation

Read the “Safety Instructions” first!

Before consulting the nearest Authorized

Service for installing the drying machine, see

the information in the user guide and make sure

the electric and water utilities are as required. If

not, call an electrician and plumber to arrange

the utilities as necessary.

It is customer's responsibility to

prepare the location the drying

machine shall be placed on and

also have power and waste water

installation prepared.

Check for any damage on the

drying machine before installing it. If

drying machine is damaged, do not

get it installed. Damaged products

cause a risk for your safety.

Wait 12 hours prior to operating the

drying machine.

NOTICE

The product includes a cooling

agent and if the product is operated

right after its transported, it may

get damaged. After each time the

product is moved, it shall be left to

rest for 12 hours.

4.1 Right place for installation

• Install the drying machine on a flat and

stable surface.

• Dryer machine is heavy. Do not move it by

yourself.

• Operate the drying machine in an

environment free of dust with good

ventilation.

• The gap between the drying machine and

the floor shall not be reduced via materials

such as rugs, pieces of wood and bands.

• Do not block the ventilation grilles of the

drying machine.

• There shall not be doors that can be

locked, sliding doors or hinged doors near

the installation environment of the drying

machine that may block the loading door

to be opened.

• Once the drying machine is installed,

the connections must stay stable. After

placing the drying machine, ensure that

the back wall does not come in contact

with any extrusion (a water tap, electrical

outlet etc.).

• Place the drying machine with at least 1

cm space between the product and the

furniture edges.

• Your drying machine is suitable to be

operated between +5°C to +35°C. If

operated outside this temperature range,

your drying machine’s operation may be

compromised and get damaged.

• The drying machine shall not be placed

with the back side against a wall.

BDo not place the drying machine on

its power cord.

* Ignore following warning if your

product’s system does not contains

R290.

Dryer contains R290 refrigerant.*

R290 is an environment-friendly, but

flammable refrigerant.*

Ensure that the air inlet of the dryer

is open and it is well-ventilated.*

Keep potential flame sources away

from the dryer.*

4.2 Removing the shipping

safety group

Remove the shipping

safety group prior to

first use the product.

NOTICE

Do not leave an accessory or any

parts of the shipping safety group

inside the drum.

Dryer / User manual

4.3 Water connection

Instead of periodically draining the water

accumulated in the water tank, you can

discharge via the water discharge hose

supplied with the drying machine.

Connecting the water drainage hose

3 4

21-2 Remove the

hose behind the

drying machine

by pulling it

manually from

where it is

attached. Do

not use a tool

to remove the

hose.

3 Insert one end of the water discharge hose

supplied with the drying machine to where

you have removed the hose on the drying

machine.

4 Fix the other end of the water discharge

hose to directly waste water drainage or a

sink.

NOTICE

The water discharge hose shall be

fixed at maximum 80 cm height.

Ensure that the water discharge

hose do not get kinked, collapsed

or pressed on between the

discharge and the drying machine.

Hose shall be connected not to

be disconnected from its location.

Leaked water may cause damage.

Do not extend the water drainage

hose.

Check whether the water runs at an

appropriate flow. The drainage line

shall not be closed or clogged.

If an accessory package is provided

with your product, check the

detailed instructions.

4.4 Adjusting the stands

Until the drying

machine stands level

and sturdy, adjust

the stands by turning

them left and right.

4.5 Moving the drying machine

• Drain the water in the drying machine

completely.

• If the product is connected via direct

discharge, remove the hose connections.

The drying machine is

recommended to be moved in

upright position. Otherwise, tilt it to

the right side when viewed from the

front and move the drying machine.

Wait 12 hours prior to operating the

drying machine.

4.6 Warning regarding the noise

As the product is

operated, metallic

noises may come

from the compressor

from time to time, it is

normal.

When the product is operated,

the accumulated water is pumped

to the water tank. It is normal to

hear pumping sounds from the

appliance during this operation.

4.7 Replacing the lighting bulb

If your drying machine has drum lighting lamp;

Consult the authorized service to replace the

bulb/LED used in lighting your drying machine.

The bulb in this product is not suitable for home

lighting. The intended use of this lamp is to

ensure safely loading the laundry to the drying

machine. The lamps used in this appliance is

resistant to heavy physical conditions such as

temperatures over 50°C.

18 Dryer / User manual

Read the “Safety Instructions” first!

5.1 Laundry suitable for

drying in drying machine

NOTICE

Laundry that are not drying machine

safe may damage the appliance and

the laundry during drying. Follow

the instructions on the labels on the

laundry to be dried. Only dry the

laundry with “drying machine safe”

written on their labels.

Do not dry

with dryer

5.2 Laundry not suitable for

drying in drying machine

NOTICE

Undergarments with metal supports

shall not be dried in drying machine.

If these metal supports get loose

and ripped from the garment, it may

damage the machine.

Delicate embroidery textiles, cotton

and silk garments, garments

manufactured from delicate and

valuable textiles, non breathing

garments and tulle curtains shall not

be dried in drying machine.

5.3 Preparing the laundry to be dried

NOTICE

Items such as coins, metal parts,

needles, nails, screws, stones etc.

may damage the drum group of the

product or may cause functional

operation issues. Therefore check

all laundry that will be loaded to the

product.

Dry the laundry with metal

accessories such as zippers by

turning them inside out.

Close the zippers, hooks and

clasps, button up the covers’

buttons, tie textile belts and apron

belts.

5.4 What to do for energy saving

• Use the highest possible wringing option

as you wash the laundry. Therefore you

can reduce the drying period and reduce

energy consumption. Sort the laundry

based on their types and thickness.

Dry same types of laundry together. For

instance kitchen towels and table cloths

dry faster than bathroom towels.

• Follow the recommendations in the user

manual for program selection.

• During drying do not open the loading

door unless necessary. If you are required

to open the loading door, do not keep it

open for too long.

• Do not add wet laundry as the drying

machine operates.

• Clean the Fibre Filter before and after

each drying session.

• For condensation models, be sure to

clean the condenser at least once a

month or after each 30 drying sessions.

• Make sure the filters are clean. Refer to

maintenance and cleaning for details.

• For models with flue, follow the flue

connection rules specified in the guides

and clean the flue.

• During drying session, properly ventilate

the environment in which the drying

machine is in.

• On models with heat pump, check the

condenser at least every six months and

clean it if it is dirty.

5 Preparation

Dryer / User manual

• If you are using environment friendly filter,

you are not required to clean the filter

after every cycle. When the environment

friendly icon is lit on the screen, change

the filter cloth.

5.5 Correct load capacity

NOTICE

If the laundry in the

product exceed

maximum load

capacity, it may not

operate as intended

and may cause

material damage or

damage the product.

For each program,

follow the maximum

load capacity.

The weights below are provided as examples.

Laundry

Approx.

weight

(g)*

Laundry Approx.

weight (g)*

Cotton

bedding

(double size)

1500 Cotton dress 500

Bedding

(single size) 1000 Dress 350

Bed sheet

(double size) 500 Denim 700

Bed sheet

(single size) 350 Handkerchief

(10 pcs) 100

Large table

cloth 700 T-Shirt 125

Small table

cloth 250 Blouse 150

Tea napkin 100 Cotton shirt 300

Bath towel 700 Shirt 200

Hand towel 350

*Weight of dry laundry before washing.

20 Dryer / User manual

6.1 Control Panel

6 Running the product

1. On/Off/Program Selection button.

2. Start / Stand-by button.

3. End time selection button.

4. Time program selection button.

5. Low temperature selection button.

6. Audible warning and child lock selection

button.

7. Wrinkle prevention selection button/ Drum

light button.

8. Dryness level selection button.

6.2 Symbols

6.3. Preparation of drying machine

• Plug the drying machine.

• Open the loading door.

• Place the laundry to the drying machine

without jamming them.

• Push and close the loading door.

NOTICE

Ensure that no

laundry is jammed to

the loading door.

Do not close the

loading door with

force.

• Select the desired program by using

On/Off/Program Selection button, the

machine will turn on.

Selecting the program with the On/

Off/Program Selection button does

not mean that the program started.

Press Start / Stand-by button to

start the program.

Filter

cleaning

Water tank Condenser

cleaning

Start/

Stand-by Iron Dry

Drying Audible

warning

Wardrobe

Dry

Wardrobe

Dry+

Wardrobe

Dry Extra

End Wrinkle

prevention

Child lock Low

temperature

Timer

program

End timeEnvironmentally-

friendly filter full

Environmentally-

friendly lter Steam Steam

Level 1

Steam

Level 2

Wool drying

Wi- icon

Silent

Remote

control icon

Refreshing

OutdoorDelicate

drying

Hygiene

(Baby+)

Feather

Support

Service

Dryer / User manual

6.4 Program selection and consumption chart

Programmes Programme Description

Capacity (kg)

Spin speed

in washing

machine

(rpm)

Drying Time

(minutes)

Cottons

You can dry your heat-resistant cotton textiles

with this programme. A drying setting suitable for

the thickness of the products to be dried and the

desired level of dryness should be selected.

8 1000 185

Cottons Eco It dries single layer, casual cotton textiles in the

most economical way. 8 1000 179

Cottons Iron dry

You may dry your cotton laundry to be ironed in

this program to have them slightly damp for ease

of ironing. (Shirt, T-shirt, tablecloth, etc.)

8 1000 135

Synthetics

You can dry all your synthetic textiles with this

programme. A drying setting suitable for the level

of dryness you desire should be selected.

4 800 70

Mix

Use this programme to dry non-pigmenting

synthetic and cotton laundry items together.

Sports and fitness clothes may be dried with this

program.

4 1000 115

Towels Drying towels such as kitchen towel, bath towel

and hand towel. 5 1000 175

GentleCare

You may dry your delicate laundry or laundry

with hand wash symbol (silk blouses, thin

underwear, etc.) at low temperature in this

program.

2 1200 55

Daily

You can dry both cotton and synthetic laundry

with this programme.Sports and fitness clothes

may be dried with this program.

4 1000 110

Time Programmes /

Steamcure

You may select from time programmes

between 10 and 160 minutes to achieve the

desired drying level at low temperature. In this

programme, tumble drier’s operation lasts for

the set time independently from the dryness of

laundry.SteamCure is a refreshing function

making ironing easier on less worn clothes

and reducing odours (cigarette, food etc.)

due to medium air.

- - -

Jeans You may dry denim pants, skirts, shirts or jackets

in this program. 4 1200 125

Sports

Use it to dry your clothes made of synthetics,

cotton or mixed fabrics or waterproof products

such as functional jacket, raincoat etc. Turn them

inside out prior to drying.

2 1000 135

Duvet

You can dry your feather or fibre filled textile that

bears can be dried in drier label as a single piece

of laundry. You can dry double duvet, pillow or

coats as single piece of laundry. Dry your cloths

such as coats and jackets turned inside out.

- 800 165

Shirts It dries the shirts in a more sensitive manner, and

causes less creasing and easier ironing. 1,5 1200 50

22 Dryer / User manual

* : Energy Label standard program EN 61121The values in the table are determined according to

the EN 61121 standard. Consumption values may vary from the valued in the chart depending on

laundry type, wringing speed, ambient conditions and voltage levels.

Super Short 0.5kg Use this program to have 2 shirts ready for

ironing. 0,5 1200 30

Hygienic Drying

It is the programme that you can dry your

washed products you want to provide with extra

hygiene (baby clothes, underwear, towels, etc.).

It provides high hygiene for your textiles via heat

effect.

5 800 200

Hygienic Refresh

You can use this programme for your dry clothes

and laundry that you want to provide with

hygiene without washing them. It provides high

hygiene for your dry textiles via heat effect.

1,5 - 120

Energy consumption values

Programmes Capacity (kg)

Spin speed in washing

machine (rpm)

Approximate amount of

remaining humidity

Energy consumption value

kWh

Cottons Eco * 8 1000 60% 1,98

Cottons Iron dry 8 1000 60% 1,55

Synthetics cupboard

dry 4 800 40% 0,70

“Cottons Eco programme” used at full and partial load is the standard drying programme

to which the information in the label and the fiche relates, that this programme is suitable for

drying normal wet Cottons laundry and that it is the most efficient programme in terms of

energy consumption for Cottons.

“If you regularly dry the 8 Kg maximum load of Cottons we suggest to connect the drain

hose to prevent the dryer stopping mid-cycle in order to empty the tank” (see Section

“Connection to the drain”)

Dryer / User manual

Allergy UK is the trademark of

the British Allergy Foundation.

The Seal of Approval has been

created to guide people

requesting an advice that the

product significantly reduces

the amount of the allergens in an

environment where allergic people are

present or the product restricts/reduces/

eliminates the allergens. The purpose is to

provide evidence that the products have

been scientifically tested or analysed to yield

measurable results.

6.5 Auxiliary functions

Dryness level

Dryness level button is used for adjusting to

desired dryness. Program time may change

depending on the selection.

You can activate this function only

prior to start of program.

Wrinkle prevention

You can turn on and off the wrinkle prevention

function by pressing the wrinkle prevention

selection button. If you will not take the

laundry out immediately after the program has

completed, you may use Wrinkle prevention

function to prevent wrinkling of your laundry.

Audible warning

Drying machine makes an audible warning

when the program is completed. Press the

“Audible Warning” button if you do not want

audible warning. When you press the audible

warning button, the light goes off and it does

not sound when the program is completed.

You can select this function before

the program starts or after the

program starts.

Low temperature

You can activate this function only prior to start

of a program. You can activate this function

if you want to dry your laundry at a lower

temperature. The program duration will be

longer after it becomes activated.

End time

You can delay the end time of the program up

to 24 hours with end time function.

1. Open the loading door and place the

laundry.

2. Select the drying program.

3. Press the End Time selection button and

set the delay time you wish. End time LED

turns on. (When pressed and hold the

button, End Time proceeds non-stop).

4. Press the Start / Stand-by button. End

Time countdown begins. The “:” sign in the

middle of displayed delay time flashes.

You can add or remove laundry

within end time. Displayed time is

the sum of normal drying time and

end time. End Time LED turns off at

the end of countdown, the drying

starts and the drying LED turns on.

Changing the end time

If you want to change the duration during the

countdown:

Pause the program and Turn the On/Off/

Program Selection button and cancel the

program. Select the desired program and

repeat the End Time selection.

Cancelling the end time function

If you want to cancel the end time countdown

and start the program immediately:

Pause the program and Turn the On/Off/

Program Selection button and cancel the

program. Select the desired program and press

the “Start/Pause” button.

Drum Light

You can turn on and off the drum light by

pressing this button. The light turns on when

the button is pressed and turns off after certain

time.

6.6 Warning indicators

Warning indicators may vary

depending on the model of your

drying machine.

Filter cleaning

When the program is completed, the warning

indicator for filter cleaning turns on.

24 Dryer / User manual

Water tank

If the water tank fills up while the program

continues, the warning indicator starts flashing

and the machine goes into stand-by. In this

case, empty the water tank and start the

program by pressing the Start / Stand-by

button. Warning indicator turns off and program

resumes.

Cleaning of filter drawer/

heat exchanger

Warning symbol flashes periodically to remind

that filter drawer must be cleaned.

6.7 Starting the program

Press the Start/Stand-by button to start the

program.

Start/Stand-by and Drying indicators turn on to

show that program started.

6.8 Child Lock

The drying machine has a child lock which

prevents the program flow from being

interrupted when the buttons are pressed

during a program. When the Child Lock is

activated, all buttons on the panel except

the On/Off/Program Selection button are

deactivated.

Press the Audible Warning button for 3

seconds in order to activate the child lock.

The child lock has to be deactivated to be

able to start a new program after the current

program is finished or to be able to interfere

with the program. To deactivate the child lock,

keep the same buttons pressed for 3 seconds.

When the child lock is activated,

the child lock warning indicator on

the screen turns on.

When the child lock is active:

The drying machine runs, or in stand-by state

the indicator symbols will not change upon

changing the position of the program selection

button.

When the drying machine is

operated and the child lock is

active, if the program selection

button is turned, a double beeping

noise will be heard. If the child lock

is deactivated before the program

selection button is turned to its

original place, the program will

be terminated since the program

selection button is displaced.

6.9 Changing the program

after it is started

You can change the program you selected to

dry your laundry with a different program after

the drying machine starts running.

• For example, Pause the program and turn

the On/Off/Program Selection button to

select the Extra Dry program in order to

select the Extra Dry program instead of

Ironing Dryness.

• Press the Start/Stand-by button to start

the program.

Adding and removing clothes during

stand-by

If you want to add or remove clothes to/from

the drying machine after the drying program

starts:

• Press the Start/Stand-by button to put

the drying machine in Stand-by state. The

drying operation stops.

• Open the loading door while in Stand-

by state, and close the door after you

remove or add laundry.

• Press the Start/Stand-by button to start

the program.

Dryer / User manual

Adding laundry after the drying

operation starts may cause the

dried laundry inside the drying

machine to mix with wet laundry

and leave the laundry damp at the

end of operation.

Adding or removing laundry

during drying may be repeated as

many times as you wish. But this

operation continuously interrupts

the drying operation, and thus

increases program duration and

energy consumption. So, it is

recommended to add laundry

before the program starts.

If a new program is selected by

turning the program selection

button while the drying machine is

in stand-by, the running program

terminates.

Do not touch the inner surface of

the drum while adding or removing

clothes during a continuing

program. The drum surface is hot.

6.10 Cancelling the program

If you want to cancel the program and

terminate the drying operation for any reason

after the drying machine starts running, Pause

the program and turn the On/Off/Program

Selection button; the program terminates.

The inside of the drying machine

shall be extremely hot when you

cancel the program during machine

operation, so run the refreshing

program to allow it to cool down.

6.11 End of program

When the program ends, the LED’s of End/

Wrinkle Prevention and Fibre Filter Cleaning

Warning on the program follow-up indicator

turn on. Loading door can be opened and

drying machine is ready for another operation.

Turn the On/Off/Program Selection button to

On/Off position in order to turn off the drying

machine.

If the Wrinkle Prevention mode

is active and the laundry is not

removed after the program is

completed, the wrinkle prevention

function activates for 2 hours to

prevent the laundry inside the

machine to get wrinkled. The

program tumbles the laundry with

10-minute intervals to prevent them

from wrinkling.

6.12 Odour feature

If your drying machine has odour feature, read

the ProScent manual to use this feature.

6.13 SteamCure Odour and

Wrinkle Removal Function

SteamCure is a refresher function that helps

ironing the dry clothes that worn very little and

aims to reduce airborne (cigarettes, food, etc.)

odours.

It is recommended to wash the clothes to

remove odours that can be absorbed by them

such as perfumes, deodorants and sweat.

Do not dry products that includes sharp or hard

accessories and leather.

Filling the water tank

1 blue wing in the machine performs the

process of watering the laundry.

If the wing is on top, you can manually rotate

the drum to the lower position and fill the water.

Before using the Steamcure program, the water

in the filling container at max. Level must be

filled manually into the wing.

To remove wrinkles, tap or drinking water

should be used.

A few drops of water that may overflow from

the wing during filling will not cause any

problem.

26 Dryer / User manual

Additives or descaling agents

should not be used.

Chemicals that can be dissolved

with liquid chemicals and liquids

should not be used.

Starting the Program

The wing should be brought to the lower

position and should be filled with water up

to the marked area with the filling container.

The SteamCure program must be selected.

When you select the program, the screen

time will appear as 10 minutes. The time

program is set to the desired time by

pressing the selection button and the Start/

Standy-By button is pressed.

For an effective odour removal,

it is recommended to operate 1-6 pieces of

dry clothing for 50 minutes.

This function does not clean clothes, it

reduces the odours and wrinkles and allows

you to wear them again.

Dryer / User manual

7 Maintenance and cleaning

Read the “Safety Instructions” first!

7.1 Fibre Filters (internal and

external filters) / Cleaning of the

Interior Surface of the Loading Door

The hair and fibres that are separated from the

laundry during drying process is collected by

the Fibre Filter.

After each drying cycle, clean the

fibre filter and the inner surface of

the loading door.

NOTICE

Your drying machine has 2 fibre

filters with one placed inside the

other. Do not operate the product

without the fibre filters.

To clean the fibre filter:

• Open the loading door.

• Hold the first part (inner filter) of the two

part fibre filter and remove it by pulling it

upwards.

• Remove the second part (outer filter) by

pulling it upwards.

Ensure that hair, fibre and cotton

balls do not fall into the slot where

the filters are installed.

• Open both of the fibre filters (outer and inner)

and remove the fibres with your hands or

with the brush on the air deflector. You can

clean the hair in the filters with a vacuum

cleaner.

• Clean both filters under water running in

reverse direction of fibre accumulation or

with a soft brush. Dry the filter before placing

it back.

28 Dryer / User manual

• Insert the fibre filters on one another and

place it back in its place.

• Clean the inner surface of the loading door

and the gasket with a soft damp cloth or the

brush on the air deflector.

7.2 Cleaning the sensor

The drying machine has humidity sensors that

detect whether the laundry is dry.

To clean the sensors:

Open the drying machine loading door.

If the machine is hot due to drying operation,

wait until it cools.

Clean the metal surfaces of the sensor with a

soft cloth dampened with vinegar and then dry.

Clean the metal surfaces of the

sensor 4 times a year.

Do not use metal tools to clean the

sensors’ metal surfaces.

Due to fire and explosion hazard, do

not use solutions, cleaning materials

or similar tools to clean sensors.

Dryer / User manual

7.3 Emptying the water tank

During drying, the moisture is removed from

the laundry and condensed, then the water

is accumulated in the water tank. Empty the

water tank after each drying session.

Condensed water is not potable

water!

Do not remove the water tank as a

program is running!

If you do not empty the water tank, during the

next drying sessions the machine will stop

operating due to the water tank being full and a

Water Tank warning icon will blink. In this case

empty the water tank and to continue drying

operation, press the Start / Stand-by button.

To drain the water tank:

Pull the water tank out from its drawer carefully.

1. Remove the water tank in the drawer or the

kickplate carefully.

Remove the water in the water tank.

If fibre is accumulated in the funnel on the water

tank, remove it under running water.

Place back the water tank.

If direct discharge option is used,

water tank is not required to be

drained.

7.4 Cleaning the condenser

The hair and the fibre that are not collected by

the fibre filter accumulates on the metal surface

of the condenser behind the air deflector. These

fibres shall be cleaned regularly.

If the condenser cleaning icon blinks, check

the metal surface. If there is any fibre, clean it. It

must be checked at least every 6 months.

Open the toe board

by pulling its button.

Move the latches to

open the air deflector

lid.

Pull the brush to the

left to remove it. You

can use the cleaning

brush to clean

filter, condensing

metal surface and

accumulated fibre on

the door.

The cleaning brush is inside the

documentation bag. Get your

brush from the documentation bag

and insert it to its place on the air

deflector to store it.

30 Dryer / User manual

Clean the fibre on the

metal surface of the

condenser with damp

cloth or the brush on

the air deflector in

up - down direction.

Do not clean with

left - right direction

since it will damage

the metal plates of the

condenser.

You can use a

vacuum cleaner with

a brush for cleaning.

If the vacuum cleaner

does not have

a brush, it is not

recommended to be

used for condenser

cleaning.

After cleaning the

filter, door and the

condenser, drag the

brush to the right and

lock it in its place.

After the cleaning

process is completed,

place the air deflector

cover to its place,

move the latches to

close it and close the

toe board.

You can clean by hand, provided

you wear protective gloves. Do not

try to clean with bare hands. The

condenser fins may damage your

hands. Cleaning from left to right

may damage the condenser fins.

This may lead to drying issues.

When the air deflector cover is

removed, it is normal to have water

at the plastic section in front of the

condenser.

If you see fibre

accumulation on the

fan cover and the toe

board, remove with a

cloth.

Do not have weight

on the toe board

when it is open.

NOTICE Do not use abrasive materials or

steel wool to clean the drum.

Dryer / User manual

8 Troubleshooting

Drying operation takes too long.

Fibre filter (interior and exterior filter) pores may be clogged. >>> Wash the fibre filters with warm water

and dry.

Condenser front side may be clogged. >>> Clean the front side of the condenser.

The ventilation grills in front of the machine may be closed. >>> Remove any object in front of the

ventilation grills that blocks air.

Ventilation may be inadequate because the are the machine is installed in is too small. >>> Open the

door or windows to prevent the room temperature from rising very high.

If there is a humidity sensor.

A lime layer may have accumulated on the humidity sensor. >>> Clean the humidity sensor.

Excessive amount of laundry might be loaded. >>> Do not load the drying machine excessively.

Laundry might not have been wrung adequately. >>> Perform a higher speed wringing on the washing

machine.

Clothes come out damp after drying.

A program not suitable for the laundry type may have been used.>>> Check the maintenance labels on

the clothes and select a program suitable for the clothes' type or use time programs as extra.

Fibre filter (interior and exterior filter) pores may be clogged. >>> Wash the filters with warm water and

dry.

Condenser front side may be clogged. >>> Clean the front side of the condenser.

Excessive amount of laundry might be loaded. >>> Do not load the drying machine excessively.

Laundry might not have been wrung adequately. >>> Perform a higher speed wringing on the washing

machine.

Drying machine does not turn on or program cannot be started. Drying machine does not run after it is

configured.

Power plug might be unplugged. >>> Make sure the power cord is plugged in.

Loading door might be open. >>> Ensure that the loading door is properly closed.

A program might not be set or Start / Pause button might not be pressed. >>> Check that the program

is set and it is not in Pause position..

Child lock may be activated. >>> Turn off the child lock.

Program terminated prematurely for no reason.

Loading door might be closed completely. >>> Ensure that the loading door is properly closed.

There might be a power outage. >>> Press the Start / Pause / Cancel button to start the program.

Water tank may be full. >>> Empty the water tank.

Clothes have shrunk, hardened or spoiled.

A program not suitable with the laundry type might have been used. >>> Check the maintenance labels

on the clothes and select a program suitable for the clothes.

Water drips from the loading door.

Fibres might have gathered on the inner sides of the loading door and the loading door gasket. >>>

Clean the inner surfaces of the loading door and the loading door gasket surfaces.

Loading door opens by itself.

Loading door might be closed completely. >>> Push the loading door until the closing sound is heard.

Water tank warning symbol is on/flashing.

Water tank may be full. >>> Empty the water tank.

Water discharge hose might have collapsed. >>> If the product is connected directly to the water drain

check the water discharge hose.

32 Dryer / User manual

The lighting inside the drying machine does not turn on. (In models with lamp)

The drying machine might not have been turned on using On/Off button. >>> Check that the drying

machine is turned on.

Lamp might be malfunctioning. >>> Contact Authorized Service to replace the lamp.

Wrinkle prevention icon or light is lit.

Anti-Crease mode that prevents the laundry in the drier to crease may be activated. >>> Turn the drier

off and remove the laundry.

Fibre filter cleaning icon is lit.

Fibre filter (interior and exterior filter) may be unclean. >>> Wash the filters with warm water and dry..

A layer may be formed on the fibre filter pores that leads to clogging. >>> Wash the filters with warm

water and dry.

A layer that may cause clogging of the pores of the fibre filters (internal and external filters) may have

occurred.<<Wash and dry the filters with lukewarm water>>

Fibre filters may not be inserted. >>> Insert the interior and exterior filters to their places.

Environmentally-friendly filter cloth may not be installed on the plastic part and the front of the condenser

may have clogged.>>>Install the environmentally-friendly filter to the plastic part and place it on the filter

housing.

Environmentally-friendly filter may have not been replaced although the warning

symbol is illuminated. “Replace your filter.”

An audible warning is heard from the machine

Fibre filters may not be inserted. >>> Insert the interior and exterior filters to their places.

Filters of the machine may not have been installed.>>> Install the fibre filters (internal and external) or the

environmentally-friendly filter to their housing.

Condenser warning icon is flashing.

Condenser front side may be clogged with fibres. >>> Clean the front side of the condenser.

Fibre filters may not be inserted. >>> Insert the interior and exterior filters to their places.

The lighting inside the drying machine turns on. (In models with lamp)

If the drying machine is plugged to the power outlet, the On/Off button is pressed and the door is open;

the light turns on. >>> Unplug the drying machine or bring the On/Off button to Off position.

Wifi icon flashes continuously. (for models featuringHomeWhiz Function)

>>> The product may not be connected to the wireless network. Follow the instructions to connect

to the network. The device which the product utilize to connect to network may be faulty. Check it.The

product may not be connecting to the network due to proximity.

If you see the “F L t” message on the screen, please follow the steps below.

Filters may be dirty. Clean internal and external filters or replace the eco-friendly filter.

If you use double filter, as an internal and external filter, on the cover area, ensure that both filters are

installed.

If you use the eco-friendly filter feature, ensure that the filter cloth is installed to the plastic part. Install

the filter cloth to the plastic part if it is not installed.

The are in front of the condenser may be dirty. Open and inspect the toe board area and ensure that it is

clean. Refer to the Maintenance and Cleaning section.

If the problem persists after following the instructions in this section, contact your vendor or an

Authorized Service. Never try to repair your product yourself.

If you experience any issue with your device, you can request a replacement by consulting to

the nearest authorised service with the device model number.

Dryer / User manual

9. Electrical Connection manufacturer, its service agent or similarly

qualified people.

Do not operate without the top

cover fitted. Risk of injury.

Important

9.3 Fitting a different plug

As the colours of the wires in the mains

lead of this appliance may not correspond

with the coloured markings identifying the

terminals on your plug, proceed as follows:

1 Connect the green - yellow or green (earth)

wire to the terminal in the plug marked ‘E’

or with the symbol or coloured green and

yellow or green.

2 Connect the blue (neutral) wire to the

terminal in the plug marked ‘N’ or coloured

black.

3 Connect the brown (live) wire to the

terminal in the plug marked ‘L’ or coloured

red.

With the alternative plugs a 13 A fuse must

be fitted either in the plug or adaptor or in

the main fuse box. If in doubt contact a

qualified electrician.

Green and yellow

or green

Blue or black L

Brown or red

9.4 Washer/dryer combination

Do not stack washing machine on top of

the tumble dryer. This would damage both

appliances and guarantees would become

void. It is also unsafe to stack an appliance

on top of another without using a suitable

and approved stacking kit obtained from

specialist retailers.

Make sure that you have an earthed power

outlet socket rated at 13 amps (minimum).

9.1 Attention!

When installed, the socket must be

reachable after installation, or a separate

switch (which can disconnect the two poles)

must be used in the installation. Check for

suitability.

For a permanent connection, a master

switch with at least 3mm contact clearance

and minimum 13 A rating must be used.

9.2 Electrical requirements

Before you insert the plug into the wall

socket make sure that the voltage and

the frequency shown in the rating label

corresponds to your electricity supply.

We recommend that this appliance be

connected to the mains supply via a suitable

switched and fused socket in a readily

accessible position.

Should the mains lead of the appliance

become damaged or need replacing at

any time, it must be replaced by a special

purpose made mains lead which can only be

obtained from an Authorised Service Agent.

Warning

This appliance must be earthed

If the fitted moulded plug is not suitable for

your socket, then the plug should be cut off

and an appropriate plug fitted.

The moulded plug on this appliance

incorporates a 13A fuse. Should the fuse

need to be replaced an ASTA approved

BS1362 fuse of the same rating must be

used. Do not forget to refit the fuse cover.

In the event of losing the fuse cover, the

plug must not be used until a replacement

fuse cover has been fitted. Colour of the

replacement fuse cover must be the same

colour as that visible on the pin face of the

plug. Fuse covers are available from any

good electrical store.

In order to avoid hazards, damaged

supply cord should be replaced by the

34 Dryer / User manual



BEKO UK AND IRELAND STANDARD MANUFACTURER GUARANTEE TERMS AND CONDITIONS

Your new Beko product is guaranteed against faulty materials, defective components or manufacturing defects.

The standard guarantee starts from the date of original purchase of the product, and lasts for a period of twelve (12)

months unless Beko plc (the “Manufacturer”) agrees to extend the guarantee for the product in writing.

If you have purchased an American style Fridge freezer, the standard guarantee starts from the date of original

purchase of the product, and lasts for a period of twenty four (24) months unless Beko plc (the “Manufacturer”)

agrees to extend the guarantee for the product in writing.

If you have any questions about the guarantee on your product (including how long it is valid), please contact your retailer or

our contact centre on 0333 207 9710 (UK and Northern Ireland) or 01 862 3411 (Republic of Ireland)

This guarantee does not in any way diminish or affect your statutory rights in connection with the product. This guarantee is in

addition to your statutory rights as a consumer. If you have any questions about these rights, please contact the retailer from

which you purchased the product. In certain circumstances, it is possible that your statutory rights may offer additional or

higher levels of protection than those offered under the terms of this guarantee.

What is covered by this guarantee?

• Repairs to the product required as a result of faulty materials, defective components or manufacturing defects.

• Functional replacement parts to repair a product.

• The costs of a Beko Approved Engineer to carry out the repair.

What is not covered?

• Transit and delivery damage.

• Cabinet or appearance parts, including but not limited to control knobs, flaps and handles.

• Accessories and/or consumable items including but not limited to ice trays, scrapers, cutlery baskets, filters and light

bulbs.

• Repairs necessary as a direct or indirect result of:

- Accidental damage, misuse or abuse of a product.

- An attempted repair of a product by anyone other than a Beko Approved Engineer (the “Engineer”).

- Installation or use of a product where such installation or use fails to meet the requirements contained in this

guarantee or the User Instructions Booklet.

• Repairs to a product operated at any time on commercial or non-residential household premises (unless we have

previously agreed to the installation environment).

This guarantee is limited to the cost of repairing the product. To the extent permitted by law, the Manufacturer does not accept

and will not be held liable for any financial loss incurred in connection with the failure of any product to operate in accordance

with the expected standards. Such financial loss includes but is not limited to loss arising from:

• Time taken off work.

• Damaged food, clothing or other items.

• Meals taken at restaurants or from takeaways.

• General compensation for inconvenience.

Important Notes

1. Your product is designed and built for domestic household use only.

2. The guarantee will automatically be void if the product is installed or is used in commercial or non-residential

domestic household premises, unless we have previously agreed to the installation environment.

3. The product must be correctly installed, located and operated in accordance with the instructions contained in the

User Instructions Booklet provided with your product.

4. Professional installation by a qualified Electrical Domestic Appliance Installer is recommended for all Washing

Machines, Dishwashers and Electric Cookers (as incorrect installation may result in you having to pay for the cost of

repairing the product).

5. Gas Cookers must be professionally installed by a Gas Safe (or Gas Networks Ireland for Republic of Ireland)

registered gas installer.

6. This guarantee is given in respect of products purchased and used within the United Kingdom and the Republic of

Ireland.

7. This guarantee is effective from the initial date of purchase of a new product from an authorised retailer and will be

void if the product is resold.

8. This guarantee does not apply to graded sales (where the product is purchased as a “second”).

Dryer / User manual



9. Possession of a copy of these terms and conditions does not necessarily mean that a product has the benefit of this

guarantee. If you have any questions, please call our Call Centre on the number set out above.

10.

The Manufacturer reserves the right to terminate the guarantee if its staff or representatives are subjected to physical

or verbal abuse in the course of carrying out their duties.

11. Optional extras, where available (i.e. extendable feet) are supplied on a chargeable basis only.

Does Beko offer replacements?

This is a repair-only guarantee. On occasion, the Manufacturer may at its sole discretion, replace your product with a new

product instead of carrying out a repair. Where a replacement is offered, this would normally be an identical model but when

this is not possible, a model of similar specification will be provided. The Manufacturer will cover the costs and arrange for the

delivery of the new product and for the return of the old product. Any costs related to disconnecting the faulty product and

installing the replacement product will not be borne by the Manufacturer unless previously agreed to in writing. The original

guarantee will continue to apply to the replacement product; the new product will not come with a new guarantee.

When will the repair take place?

Our Engineers work Monday to Friday 9.00am to 5.00pm. Appointments outside these hours may be possible at the sole

discretion of the Manufacturer but cannot be guaranteed. Whilst our Engineers will endeavour to minimize inconvenience and

to meet requests for specific timed appointments, this cannot be guaranteed. We will not be liable for delays or if it is una

ble to

carry out a repair because a convenient appointment cannot be arranged.

Will there be any charge for the repairs?

It is your responsibility to provide evidence to the Engineer that your product is covered by this guarantee with a proof of

purchase. The Manufacturer reserves the right to charge for the reasonable cost of any service call if:

• You cannot provide evidence that your product is covered by this guarantee.

• Where a service call has been made and the engineer finds that there is no fault with your product.

• That your product has not been installed or operated in accordance with the User Instructions Booklet.

• That the fault was caused by something other than faulty materials, defective components or manufacturing defects.

• For missed appointments.

Payment of these costs are due immediately upon the Engineer providing you with an invoice. The Manufacturer reserves the

right to terminate the guarantee if you fail to pay the costs for the service call in a timely manner.

If you are a resident of the United Kingdom, this guarantee will be governed by English law and subject to the English Courts,

save where you live in another part of the United Kingdom, in which case the law and courts of that location will apply.

If you are resident in the Republic of Ireland, this guarantee will be governed by Irish law and the Irish courts will have

jurisdiction.

This guarantee is provided by Beko plc. Beko House, 1 Greenhill Crescent, Watford, Hertfordshire. WD18 8QU.

Beko plc is registered in England and Wales with company registration number 02415578.



BEKO UK AND IRELAND BUILT-IN APPLIANCES GUARANTEE TERMS AND CONDITIONS

If you have purchased a built-in or integrated appliance, and registered it within 90 days of purchase by completing

the online registration form, then the standard 12 month guarantee will be extended to 24 months, under the same

terms and conditions as detailed in our Standard Guarantee Terms and Conditions.

36 Dryer / User manual



BEKO UK AND IRELAND PROSMART INVERTER MOTOR GUARANTEE TERMS AND CONDITIONS

This 10 year guarantee relates to Beko products that feature the ProSmart Inverter Motor.

The ProSmart Motor guarantee terms and conditions are in addition to our Standard guarantee terms and conditions detailed

in the previous section.

In order to activate the 10 year guarantee you MUST register the appliance within 90 days of the original purchase

date. You can register by first visiting Beko.co.uk/register and by following the online instructions.

Beko Free standing appliances come with a 12 month parts and labour guarantee as standard,

Beko Built-in appliances come with a 12 month parts and labour guarantee as standard. This is extended to 24 months, free of

charge, upon registration of the appliance. When you register your appliance for additional guarantee, you will automatically

activate the ProSmart Motor 10 year guarantee. You do not need to register twice. (beko.co.uk/guarantee-terms).

To make a claim against your Beko ProSmart Inverter Motor Guarantee (the “Guarantee”), all customer and product details

must be registered with Beko plc using the procedure outlined below.

1. This extra 9 years (for free standing appliances) or 8 years (for built-in or integrated appliances) guarantee is only

effective after the expiration of the standard manufacturer’s guarantee.

2. It is only valid for the ProSmart Inverter motors of selected washing machines, washer-dryers, tumble dryers and

dishwashers. It does not cover any labour charge or any other components of the product. In addition, it is only valid

for one replacement of the ProSmart motor during the extra 9-year (for free standing appliances) or 8 year (for built-in

appliances) guarantee period.

3. To activate your guarantee, you MUST register your appliance within 90 days of the original purchase date, by visiting

beko.co.uk/register.

4. Customers will receive a unique reference code as proof of guarantee validation by email or post, which must be

quoted at the time of a claim being made.

5. Any repair/replacement of the ProSmart Inverter motor must only be carried out by an authorised Beko Service Agent

(the “Service Agent”).

6. Labour for the repair/replacement of the ProSmart Inverter motor is not included in this guarantee and is chargeable

directly by the Service Agent.

7. Any additional components fitted to the product at any time will not be covered by this guarantee and will be

chargeable directly by the Service Agent.

8. The guarantee is not transferable and cannot be exchanged for cash.

9. There are no alternative or additional offers to this Guarantee.

10. The guarantee is exclusive of the manufacturer’s standard guarantee

11. The Terms and Conditions shown above are in addition to the standard terms and conditions of your product

guarantee. Please read and refer to such Terms and Conditions when making any claim.

12. We may use the information you provide for marketing purposes and to analyse your purchasing preferences. We

may keep your information for a reasonable period for these purposes in accordance with the applicable Data

Protection Laws and General Data Protection Regulations (GDPR). You can opt into this service during the

registration process. Further details are available at http://www.beko.co.uk/cookie-and-privacy.

13. These Terms and Conditions are governed by the laws of England and Wales; manufacturer: Beko plc, Beko House,

1 Greenhill Crescent, Watford WD18 8QU. Company Registration Number: 02415578.



HOW TO OBTAIN SERVICE FOR YOUR APPLIANCE

Please keep your purchase receipt or other proof of purchase details in a safe place; you will need to have this documentation

available should the product require attention under guarantee.

Please take a few moments to complete the details below, as you will need this information when you call us, or to use our

online services. When you call us you may be required to input your serial number into your telephone keypad. For help please

visit beko.co.uk/support/model-finder

• The product model number is printed on the Operating Instruction Booklet / User guide

• The product model and serial number is printed on the Rating Label affixed to the appliance.

• The Retailer (Purchased from) and Date of purchase will be printed on your purchase receipt or other proof of

purchase paperwork

Recording of these details alone will not count as proof of purchase. A valid proof of purchase is required for requesting

service under guarantee.

Model number

Serial number

Purchased from

Date of purchase

For service under guarantee or for product advice please call our Contact centre

Before requesting service please check the troubleshooting guide in the Operating Instructions booklet, as a charge may be

levied where no fault is found, and even though your product may still be under guarantee.

After arranging service the area around the product must be easily accessible to the Engineer, without the need for cabinets or

furniture to be removed or moved.

It is your responsibility to ensure our Engineers have a clean and safe environment to carry out any repairs.

Please have your Model number and Serial number available when you call us, as you may be required to input your serial

number into your telephone keypad during your call.

UK Mainland & Northern Ireland:

0333 207 9710

Landline or mobile calls to 0333 numbers cost no more than calls to geographic numbers 01 or 02, and are charged at the

basic rate. Calls from landlines and mobiles are included in free call packages but please check with your telephone service

provider for exact call charges.

Republic of Ireland:

01 862 3411

Service once the manufacturers guarantee has expired

If you have purchased an extended guarantee please refer to the instructions contained within the extended guarantee

agreement document, otherwise please call us using the appropriate number above, where service can be obtained at a

charge.

Should you experience any difficulty in obtaining service please call us on 0333 207 9710 or 01 862 3411

Send us a secure message through our online contact us form. Please visit our website, click Contact Us and choose a

product support topic from the list of options. Complete the required details and click send message.

Product registrations

For UK registrations please visit beko.co.uk/register and for the Republic of Ireland visit beko.ie/register.

38 Dryer / User manual

(4) Scale from G (lest efficient) to A (most efficient)

(5) Weighted average value — L WA expressed in dB(A) re 1 pW

(1) Scale from A+++ (most efficient) to D (least efficient)

(2) Energy consumption based on 160 drying cycles of the standard cotton programme at full and partial load, and the consumption of

the low-power modes. Actual energy consumption per cycle will depend on how the appliance is used.

(3) "Cotton cupboard dry programme" used at full and partial load is the standard drying programme to which the information in the

label and the fiche relates, that this programme is suitable for drying normal wet cotton laundry and that it is the most efficient

programme in terms of energy consumption for cotton

: Yes - : No

Supplier name or trademark

Model name

Rated capacity (kg)

Type of Tumble Dryer Condenser

Air Vented

Energy efficiency class (1)

Annual Energy Consumption (kWh) (2)

Type of Control

Energy consumption of the standard cotton programme at full load (kWh)

Energy consumption of the standard cotton programme at partial load (kWh)

Power consumption of the off-mode for the standart cotton programme at full load, PO (W)

Power consumption of the left-on mode for the standart cotton programme at full load, PL (W)

The duration of the left on mode (min)

Standard cotton programme (3)

Programme time of the standard cotton programme at full load, Tdry (min)

Programme time of the standard cotton programme at partial load, Tdry1/2 (min)

Weighted programme time of the standard cotton programme at full and partial load (T t)

Condensation efficiency class (4)

Average condensation efficiency of the standard cotton programme at full load, Cdry

Average condensation efficiency of the standard cotton programme at partial load, Cdry1/2

Weighted condensation efficiency of the standard cotton programme at full load and partial load, C t

Sound power level for the standard cotton programme at full load (5)

Built-in

PRODUCT FICHE

Complying Commission Delegated Regulation (EU) No 392/2012

Non-automatic

Automatic

A++

236,0

1,98

8.0

0,47

1,00

87%

179

110

140

1,05

B3T4823DW

7188236230

BEKO