Table of Contents
- OLE_LINK1
- OLE_LINK2
- Dishwasher
- Important safety instructions
- Installation
- Appropriate installation location
- Connecting water supply
- Connection to the drain
- Adjusting the feet
- Aquasafe+
- Electrical connection
- Initial use
- Disposing of packaging material
- Transportation of the product
- Compliance with the WEEE Directive and Disposing of the Waste Product:
- Compliance with RoHS Directive:
- Prewashing
- Tips for energy saving
- Water softening system
- Adjusting the water softening system
- Adding salt
- Detergent
- Adding detergent
- Tablet detergents
- Rinse aid
- Silverware basket
- Collapsable lower basket wires
- Collapsable lower basket wires (2 & 4 pieces)
- Adjusting the height of empty upper basket
- Adjusting the height of loaded upper basket
- Maintenance and cleaning
- Troubleshooting
Beko DFS05011W User Manual
Displayed below is the user manual for DFS05011W by Beko which is a product in the Dishwashers category. This manual has pages.
Related Manuals
tüm siyah yazılar matbaaya giderken
gönderilmiyor.
Atılım rması basıyor
Dishwasher
Instruction Manual
This product was manufactured using the latest technology in environmentally friendly conditions.
Please read this user manual first!
Dear Customer,
We hope that you get the best results from the product which has been
manufactured in state-of-the-art plants and passed through a strict quality
control procedure.
Therefore, please read the entire user manual carefully before using the
product and keep it as a reference for future use. In case of transferring the
product to someone else, give the manual as well.
The user manual will help you use your product in a fast and
safe way.
• Read the user manual before installing and starting your product.
• Always follow the safety instructions.
• Keep this user manual within easy reach for future reference.
• Read also the other documents supplied with the product.
Remember that this user manual is also applicable for several other models.
Differences between models will be identified in the manual.
Explanation of symbols
Throughout this User Manual the following symbols are used:
Important information or useful hints about usage
Warning for hazardous situations with regard to life and property
Warning for electric shock
CONTENTS
1. Dishwasher 3
2. Important safety instructions 5
General safety 5
Intended use 5
Children’s safety 6
3. Installation 7
Appropriate installation location 7
Connecting water supply 7
Connection to the drain 8
Adjusting the feet 9
Aquasafe+ 9
Electrical connection 9
Initial use 9
Disposing of packaging material 10
Transportation of the product 10
Compliance with the WEEE Directive
and Disposing of the Waste Product: 10
Compliance with RoHS Directive: 10
4. Prewashing 11
Tips for energy saving 11
Water softening system 11
Adjusting the water softening system 11
Adding salt 12
Detergent 13
Adding detergent 13
Tablet detergents 14
Rinse aid 15
Silverware basket 18
Collapsable lower basket wires 18
Collapsable lower basket wires
(2 & 4 pieces) 19
Adjusting the height of empty upper
basket 20
Adjusting the height of loaded upper
basket 21
5. Maintenance and cleaning 22
Cleaning the outer surface of the
product 22
Cleaning the interior of the machine 22
Cleaning the filters 22
Cleaning the hose filter 23
Cleaning the impellers 23
6. Troubleshooting 25
3EN
1Dishwasher
Overview
1.Tabletop (depends on the model)
2.Upper impeller
3.Lower basket
4.Lower impeller
5.Filters
6.Control panel
7.Door
8.Detergent dispenser
9.Lower impeller slot
10.Silverware basket
11.Salt reservoir lid
12.Upper basket rail
13.Upper basket with rack
14.Fan drying system (depends on the model)
4EN
Technical specifications
This product complies with the following EU directives:
Development, production and sales stages of this product comply with the
safety rules included in all pertaining European Community regulations.
2006/95/EC, 2004/108/EC, 93/68/EEC, IEC 60436, EN 50242
Power input 220-240 V, 50 Hz
Total power consumption 1900-2200 W
Heater power consumption 1800 W
Total current
(depends on the model) 10 A (see type plate)
Drain pump power
consumption 30 W
Water pressure 0.3 –10 bar (= 3 – 100 N/cm² = 0.03-1.0 Mpa)
C Technical specifications may be changed without prior notice to improve the
quality of the product.
C Figures in this manual are schematic and may not match the product exactly.
C Values stated on the product labels or in the documentation accompanying
it are obtained in laboratory conditions in accordance with the relevant
standards. Depending on operational and environmental conditions of the
product, these values may vary.
Note for test institutions:
Data required for performance tests shall be provided upon request. Requests
can be e-mailed to the following address:
Do not forget to provide the code, stock and serial numbers of the product to be
tested in your request e-mail along with your contact information. Code, stock and
serial numbers of the product is located on the type label attached to the side of
the door.
dishwasher@standardloading.com
5EN
2Important safety instructions
This section contains safety
instructions that will help to get
protected from risk of personal injury
or property damage Failure to follow
these instructions shall void all
warranties.
General safety
• Never place the product on a
carpet-covered oor; otherwise,
lack of airow beneath the product
will cause electrical parts to
overheat. This will cause problems
with your product.
• Do not operate the product if the
power cable / plug is damaged!
Call the Authorised Service Agent.
• Connect the product to a grounded
outlet protected by a fuse
complying with the values in the
“Technical specifications” table. Do
not neglect to have the grounding
installation made by a qualified
electrician. Manufacturer shall not
be liable for any damages that will
arise when the product is used
without grounding in accordance
with the local regulations.
• The water supply and draining
hoses must be securely fastened
and remain undamaged.
• Unplug the product when not in
use.
• Never wash the product by
spreading or pouring water onto it!
There is the risk of electric shock!
• Never touch the plug with wet
hands! Never unplug by pulling
on the cable, always pull out by
grabbing the plug.
• The product must be unplugged
during installation, maintenance,
cleaning and repairing procedures.
• Always have the installation and
repairing procedures carried out
by the Authorised Service Agent.
Manufacturer shall not be held
liable for damages that may arise
from procedures carried out by
unauthorised persons.
• Never use chemical solvents in the
product. They bring forth risk of
explosion.
• When you pull the upper and lower
baskets out completely, the door of
the product will bear all the weight
of the baskets. Do not put other
loads on the door; otherwise, the
product may tilt.
• Never leave the door of the
product open apart from loading
and unloading procedures.
• Do not to open the door of the
product when it is running unless
necessary. Be careful for the rush
of hot steam when you need to
open the door.
Intended use
This appliance is intended to be used
in household and similar applications
such as:
• staff kitchen areas in shops,
offices and other working
environments;
• farm houses;
• by clients in hotels, motels
and other residential type
environments;
• bed and breakfast type
environments;
• Only dishwasher safe detergents,
rinse aids and additives must be
used.
6EN
• The manufacturer waives any
responsibility arisen from incorrect
usage or transportation.
• The service life of your product
is 10 years. During this period,
original spare parts will be
available to operate the appliance
properly.
• This product should not be
used by persons with physical,
sensory or mental disorders or
unlearned or inexperienced people
(including children) unless they are
attended by a person who will be
responsible for their safety or who
will instruct them accordingly for
use of the product.
Children’s safety
• Electrical products are dangerous
for the children. Keep children
away from the product when it is
in use. Do not let them to tamper
with the product.
• Do not forget to close the door of
the product when leaving the room
where it is located.
• Store all detergents and additives
in a safe place away from the
reach of the children.
7EN
3Installation
Refer to the nearest Authorised
Service Agent for installation of your
product. To make the product ready
for use, make sure that the electricity,
tap water supply and water drainage
systems are appropriate before calling
the Authorised Service Agent. If they
are not, call a qualified technician
and plumber to have any necessary
arrangements carried out.
C Preparation of the location and
electrical, tap water and waste
water installations at the place of
installation is under customer's
responsibility.
B Installation and electrical
connections must be carried out
by the Authorised Service Agent.
Manufacturer shall not be held
liable for damages that may arise
from procedures carried out by
unauthorised persons.
B Prior to installation, visually check
if the product has any defects on
it. If so, do not have it installed.
Damaged products cause risks for
your safety.
A Make sure that the water inlet and
discharge hoses are not folded,
pinched or crushed while pushing
the product into its place after
installation or cleaning procedures.
When placing the product, pay
attention not to damage the floor,
walls, piping, etc. Do not hold the
product from its door or panel to
move it.
Appropriate installation
location
• Place the product on a solid and
at oor that has sufficient load
carrying capacity! The product
must be installed on a at surface
in order for the door to be closed
comfortably and securely.
• Do not install the product at places
where temperature may fall below
0ºC.
• Place the product at least 1 cm
away from the edges of other
furniture.
• Place the product on a rigid oor.
Do not place it on a long pile rug
or similar surfaces.
A Do not place the product on the
power cable.
• Make sure that you select a
location that will allow you to load
and unload the dishes in a fast
and comfortable manner.
• Install the product in a place close
to the tap and the drain hole.
Select the installation location
by considering that it will not be
changed after the connections are
made.
Connecting water supply
C We recommend attaching a filter
on the house/apartment supply
water inlet to protect the machine
from damages that may arise
from impurities (sand, dirt, rust,
etc.) coming from the urban water
supply system or from your own
water system as well as to prevent
complaints such as yellowing or
sludge accumulation at the end of
washing.
8EN
Connection to the drain
Water discharge hose can directly be
connected to the drain hole or sink’s
drainage. The length of this connection
must be min. 50 cm and max. 100 cm
from the oor.
1011
• Open the taps completely after
making the connections to check
for water leaks.
A For your safety, close the water
inlet tap completely after the
washing programme is over.
Permitted water temperature: up to
25°C
The dishwasher may not be connected
to open warm water devices or ow-
through water heaters.
• Do not use old or used water inlet
hose on the new product. Use the
new water inlet hose supplied with
the product.
• Connect the water inlet hose
directly to the water tap. Pressure
coming from the tap should be
minimum 0.3 and maximum
10 bars. If the water pressure
exceeds 10 bars, a pressure
relief valve should be installed in
between.
C Use a screw-on hose connector
to connect the water inlet hose to
a water tap with a ¾ inch external
thread. If required, use a filter
insert to filter deposits from the
pipes.
1009
A discharge hose longer than 4 meters
causes dirty washing.
Attach the water discharge hose
to the drainpipe without bending it.
Tightly fix the water discharge hose to
the drainpipe in order to prevent any
dislocation of the water discharge hose
during operation of the product.
C Drainpipe must be connected to
the sewage system and it should
not be connected to any surface
water.
9EN
Adjusting the feet
If the door of the product cannot be
closed properly or if the product swings
when you push it slightly, then you
need to adjust the feet of the product.
Adjust the feet of the product as
illustrated in the installation manual
supplied with the product.
Aquasafe+
(depends on the model)
Protect the Aquasafe+ system against
water leaks that may occur at hose
inlet. Water contact with the valve
box of the system must be prevented.
Otherwise, electrical assembly will get
damaged. If the Aquasafe system is
damaged, unplug the product and call
the Authorised Service Agent.
A As the hose set contains electrical
connections and assemblies, never
shorten or lengthen the hose with
extension hoses.
1010
Electrical connection
Connect the product to a grounded
outlet protected by a fuse complying
with the values in the "Technical
specifications" table. Manufacturer
shall not be liable for any damages
that will arise when the product is used
without grounding in accordance with
the local regulations.
• Connection must comply with
national regulations.
• Power cable plug must be within
easy reach after installation.
A Unplug the product after the
washing programme is over.
• The voltage and allowed fuse or
breaker protection are specified
in the “Technical specifications”
section. If the current value of
the fuse or breaker in the house
is less than 16 Amps, have a
qualified electrician install a 16
Amp fuse.
• The specified voltage must be
equal to your mains voltage.
• Do not make connections via
extension cables or multi-plugs.
B Damaged power cables must be
replaced by the Authorised Service
Agent.
B If the product has a failure, it
should not be operated unless it is
repaired by the Authorised Service
Agent! There is the risk of electric
shock!
Initial use
Before starting to use the product,
make sure that all preparations
are made in accordance with the
instructions in sections "Important
safety instructions" and "Installation".
• To prepare the product to do the
dishes, perform first operation
in the shortest programme with
10 EN
Compliance with the
WEEE Directive and
Disposing of the Waste
Product:
This product complies with EU WEEE
Directive (2012/19/EU). This product
bears a classification symbol for waste
electrical and electronic equipment
(WEEE).
This product has been manufactured
with high quality parts and materials
which can be reused and are suitable
for recycling. Do not dispose of the
waste product with normal domestic
and other wastes at the end of its
service life. Take it to the collection
center for the recycling of electrical and
electronic equipment. Please consult
your local authorities to learn about
these collection centers.
Compliance with RoHS
Directive:
The product you have purchased
complies with EU RoHS Directive
(2011/65/EU). It does not contain
harmful and prohibited materials
specied in the Directive.
detergent while the machine is
empty. During the initial use, fill the
salt reservoir with 1 litre of water
prior to filling it with salt.
C Some water might have remained
in the product due to the
quality control processes in the
production. It is not harmful for the
product.
Disposing of packaging
material
Packaging materials are dangerous to
children. Keep packaging materials in
a safe place away from reach of the
children.
Package information
Packaging materials of the product
are manufactured from recyclable
materials in accordance with our
National Environment Regulations. Do
not dispose of the packaging materials
together with the domestic or other
wastes. Take them to the packaging
material collection points designated
by the local authorities.
Transportation of the product
A If you need to move the product, do
it in upright position and hold from
the rear side. Slanting the product
onto its front side may cause the
electronic parts in it get wet and
damaged.
1. Unplug the product before
transporting it.
2. Remove water drainage and water
supply connections.
3. Drain the remaining water in the
product completely.
11 EN
4Prewashing
Tips for energy saving
Following information will help you
use the product in an ecological and
energy-efficient manner.
• Wipe away any coarse food
remnants on the dishes before
putting them in the product.
• Operate the product after filling it
completely.
• When selecting a programme,
refer to the "Programme Table".
• Do not put more detergent than
suggested on the detergent
package.
Water softening system
C The dishwasher requires soft
water. If the hardness of the water
is above 6°dH, the water must be
softened and descaled. Otherwise,
ions that create the hardness will
accumulate on the surfaces of the
dishes and may adversely affect
the washing, shining and drying
performances of the product.
The product is equipped with a water
softening system which reduces the
hardness of incoming water. This
system softens the supply water that
enters into the product to a level that
will allow washing the dishes with the
required quality.
Adjusting the water softening
system
Washing performance will increase
when water softening system is
adjusted properly.
Use the test stripe supplied with the
product to determine the supply water
hardness in order to adjust the system.
12 EN
1012
Adding salt
Water softening system needs to be
regenerated in order for the product
operates with the same performance
continuously. Dishwasher salt is used
for this purpose.
C Use in your product only the
special softening salts produced
particularly for use in dishwashers.
C We recommend using granular
or powder softening salts. Do not
use salts containing insoluble
substances such as table salt
or common salt in the machine.
Performance of water softening
system may deteriorate in time.
C Salt reservoir will fill with water
when you start the product.
Therefore, add the softening salt
before starting the machine.
1. First take the lower basket out to
add softening salt.
2. Turn the salt reservoir lid in counter
clockwise to open it (A, B).
C Before initial use, fill the water
softening system with 1 litre of
water (C).
3. Fill the salt reservoir with salt by
using salt funnel (D). To speed up
dissolution rate of salt in water, stir
it with a spoon.
C You can put about 2 kg of softening
salt into the salt reservoir.
4. Replace the lid and tighten it
securely when the reservoir is full.
13 EN
1014
1014
Put the detergent into the detergent
dispenser just before operating the
machine as illustrated below.
1. Push the latch to right to open the
detergent dispenser lid (A).
5. If you will not start a washing
programme immediately after
adding the salt, run the machine
empty in the shortest programme
to dissolve and wash away the
scattered salt in the machine.
C Since different salt brands in the
market have different particle sizes
and since the water hardness
may vary, dissolution of the salt in
water may take a couple of hours.
Therefore, Salt Indicator remains
on for a while after adding salt into
the machine.
Detergent
You can use powder or tablet detergent
in the machine.
C Only use in the machine the
detergents produced particularly
for use with dishwashers. We
recommend you not to use
detergents that contain chlorine
and phosphate as they are harmful
for the environment.
C Contact the detergent producer if
the dishes are wet and/or if you
notice limescale spots particularly
on glasses after the washing
programme is over.
Adding detergent
C Refer to the “Programme Table”
to determine the correct amount
of detergent for the selected
programme.
B Do not put solvents into the
detergent dispenser. There is the
risk of explosion!
2. Put suggested amount of powder
or tablet detergent in the dispenser.
C Inside the detergent dispenser,
there are level markings that help
you use appropriate amount of
detergent. When brimful, detergent
dispenser will contain 40 cm³ of
detergent. Fill detergent up to 15
cm³ or 25 cm³ level marks in the
detergent dispenser according
to fullness of the machine and/or
soiling degree of the dishes (1).
C If dishes have been waiting for a
long time and have dried residues,
fill the 5 cm³ compartment too (5).
14 EN
2222
rinse aid and water softening salt
individually.
C Information about suitable places
(detergent dispenser, basket etc.)
in the dishwasher to place the
tablet can be found amongst the
usage instructions on the packages
of the tablet detergents.
Tablet detergent types commonly found
in the market:
2in1: Contains detergent, rinse aid or
water softening salt
3in1: Contains detergent, rinse aid and
water softening salt
4in1: Contains glass protectors in
addition to detergent, rinse aid and
water softening salt
5in1: Contains glass and stainless
steel protectors in addition to
detergent, rinse aid and water
softening salt
C Observe the instructions of
the detergent manufacturer on
the package when using tablet
detergents.
When you switch to powder
detergent from tablet detergent:
1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the
highest level and perform an empty
run.
3. After the empty washing cycle,
review the user manual and
readjust the water hardness level
so as to suit the water supply.
4. Make the appropriate rinse aid
settings.
C Depending on the model, salt
indicator and/or rinse aid indicator
must be enabled again if they were
disabled before.
3. Close the detergent dispenser lid
by pressing on it lightly. A "click"
will be heard when the lid is closed.
C In programmes with prewash and
at high temperature, in which you
use tablet detergents, make sure
that the detergent dispenser lid is
closed firmly.
C Use powder detergent in short
programmes without prewash
since the solubility of the tablet
detergent changes depending on
the temperature and time.
A Excessive usage of powder
detergents will cause the detergent
not dissolve completely and will
also cause scratches on the
glassware.
Tablet detergents
Table detergents exhibit water
softening and / or rinse aid effect in
addition to detergent effect. Some
types of these detergents also contain
special-purpose washing chemicals
such as glass and stainless steel
protectors.
C Tablet detergents give satisfying
results only under certain usage
conditions. The best washing
performance in dishwashers is
obtained by using detergent,
15 EN
1013_redaksiyon
1013_redaksiyon
Rinse aid
C The rinse aid used in dishwashers
is a special combination used to
increase drying efficiency and
prevent water or limescale stains
on the washed items. For this
reason, care must be paid to have
rinse aid in the rinse aid reservoir
and to use rinse aids produced
specially for dishwashers only.
Check Rinse Aid Indicator to determine
whether it is necessary to add rinse
aid or not 3 (depends on the model).
Having a dark light on the indicator
shows that there is sufficient amount of
rinse aid in the dispenser. If the colour
of the indicator is light, add rinse aid.
1. Open the lid of the rinse aid
reservoir by pressing its latch (B).
4. Turn the rinse aid amount
adjuster manually to a position
between 1 and 6 (4). If there are
stains on tableware items after
washing, level must be increased
and if there is a blue trace after
wiping them by hand, it must be
decreased. This is set to position 4
as factory default.
Items not suitable for washing in the
dishwasher
• Never wash dishes soiled by
cigarette ash, candle remnants,
polish, dyestuff, chemicals, etc. in
your dishwasher.
• Do not wash iron alloy items in the
dishwasher. It can get corroded or
leave stains on other items.
• Do not wash silverware and
cutlery with wooden or bone
stems, glued pieces, or pieces that
are not resistant to heat, as well as
copper and tin-plated containers in
the dishwasher.
C Decorative prints of chinaware as
well as aluminum and silver items
may get discoloured or tarnished
after washing in the dishwasher
just as it happens in handwashing
as well. Some delicate glass types
and crystals may become dull in
2. Fill the reservoir until “MAX” level.
3. Close the lid of the reservoir by
pressing on it lightly.
C Wipe clean any spilled rinse aid
outside the reservoir. Rinse aid
that spilled accidentally will cause
foaming and it will eventually
decrease washing performance.
16 EN
time. We strongly recommend
you to check if the tableware you
are going to purchase is suitable
for washing especially in the
dishwasher.
Placing the dishes into the
dishwasher
You can use your dishwasher in the
optimum way with respect to energy
consumption and washing and drying
performance only if you place the
dishes in an orderly way.
• Wipe away any coarse food
remnants (bones, seeds, etc.) on
the dishes before placing them in
the dishwasher.
• Place thin, narrow pieces in the
middle sections of baskets if
possible.
• There are two separate baskets in
which you can place your dishes in
the dishwasher. Place the heavily
soiled and bigger items in the
lower basket and smaller, delicate
and light items in the upper
basket.
• Place the hollowed dishes such as
bowls, glasses and pans upside
down in the dishwasher. Thus,
accumulation of water in deep
hollows is prevented.
A To prevent possible injuries, always
place the sharp and pointed
dishes such as service fork, bread
knife, etc. upside down so as their
pointed ends will face down or
they will lie horizontally on the dish
baskets.
• Unload dishes in the lower basket
first and then the dishes in the
upper basket.
17 EN
Suggestions for loading the
dishwasher
Lower basket
Upper basket
Improper loading of dishware
18 EN
1018
45cm_EU2_altsepet_CKS
Silverware basket
(depends on the model)
Silverware basket is designed to wash
your dishes such as fork, spoon and
etc. in a cleaner manner.
Collapsable lower basket
wires
(depends on the model)
The two piece foldable wires located
at the lower basket of the machine are
designed for an easier placement of
large pieces such as pans, bowls, etc.
(1, 2).
You can create larger spaces by
folding each wire individually or all of
them at once. Lay the foldable wires
down by pressing on the latch (A).
19 EN
8000_altsepet_45cm_2&4_
fulyatar_Gurindig_mkz_2013.ai
33 44
CC
BB
Collapsable lower basket
wires (2 & 4 pieces)
(depends on the model)
The foldable wires (A) located at
the lower basket of the machine are
designed for an easier placement of
large pieces such as pans, bowls,
etc. You can create larger spaces by
folding each wire individually or all
them at once.
To bring the collapsible wires into
horizontal position, grab the wire from
mid position and push them in the
directions of arrows (B) To bring the
wires back to vertical position, just lift
them up. Collapsible wires will click into
the latch again
Bringing the wires to the horizontal
position byholding them from the tips
may cause them to bend. Therefore,
it will be appropriate to bring the wires
in the middle to horizontal or vertical
position by holding them from their
stems and pishing in the direction of
arrow.
20 EN
1022 eps
Adjusting the height of empty
upper basket
(depends on the model)
You can adjust the height of the upper
basket according to the size of the dish
to be washed. Use basket rollers to
change the basket height.
1. Turn the stoppers on the ends of
the upper basket rails by turning
them aside (A).
2. Take the basket out (B).
3. Change the position of the rollers,
place the basket into the rail and
close the stoppers (C).
21 EN
1065 eps
Adjusting the height of loaded
upper basket
(depends on the model)
Basket adjustment mechanism on
the upper basket of the machine is
designed to allow you create wider
areas in the upper or lover section
of the machine based on your
requirements by adjusting the height
of the loaded basket in up or down
directions without removing it from the
machine.
To raise the basket:
1. Grab one of the upper basket wires
(right or left) and lift it up (A).
2. Repeat the same process to raise
the other side of the basket.
3. Make sure that both sides of
the basket height adjustment
mechanism are at the same level
(down or up).
To lower the basket:
1. Press the latch on the basket
adjustment mechanism (right or
left) to lower the basket (B).
2. Repeat the same process to lower
the other side of the basket.
3. Make sure that both sides of
the basket height adjustment
mechanism are at the same level
(down or up).
22 EN
1. Turn the micro filter (3) and
coarse filter (2) assembly counter
clockwise and pull it out from its
seating (A).
5Maintenance and cleaning
Service life of the product extends and
frequently faced problems decrease if it
is cleaned at regular intervals.
A Unplug the product and turn off the
tap before attempting any cleaning
procedures.
C Do not use abrasive substances for
cleaning.
C Clean the filters and impellers at
least once a week.
Cleaning the outer surface of
the product
Clean the outer surface and door
gaskets of the product gently with a mild
cleaning material and damp cloth. Wipe
the control panel only with a damp cloth.
Cleaning the interior of the
machine
Clean the interior of the machine
and the tank by running a prewash
programme without detergent or
a long washing programme with
detergent based on the degree of
soiling.
If water has remained in the
machine, drain the water by
performing the procedures under
the topic "Canceling a programme".
If the water cannot be discharged,
clean any leftover deposits that
have piled up in the bottom of the
machine, blocking the water path.
Cleaning the filters
Clean the filters at least once a week
in order for the machine operates
efficiently. Check if food residues are left
on the filters. If there are food residues
on filters, take them out and clean well
under running water.
1031
2. Pull out the metal / plastic filter (1)
(B).
23 EN
4. Clean all three filters under tap
water by means of a brush.
5. Replace the metal/plastic filter.
6. Place the coarse filter into the
microfilter. Make sure that it is
properly seated. Turn the coarse
filter clockwise until a “click” sound
is heard.
A Do not use the dishwasher without
filter.
C Incorrect placement of the filters
will reduce washing efficiency.
Cleaning the hose filter
Damages on the machine that may be
caused by impurities coming from the
urban supply water or your own water
installation (such as sand, dirt, rust,
etc.) can be prevented by means of the
filter attached to the water inlet hose.
Check the filter and the hose regularly
and clean them if necessary.
1. Turn off the tap and remove the
hose.
2. After taking out the filter, clean it
under running tap water.
3. Place the cleaned filter back to its
seat in the hose.
4. Install the hose to tap.
3. Press the two pawls on the coarse
filter inwards and separate the
coarse filter from the assembly (C).
Cleaning the impellers
Clean the impellers at least once a
week in order for the machine operates
efficiently.
Lower impeller
Check if the holes on the lower impeller
(1) are clogged. If they are clogged,
remove and clean the impeller. Pull the
lower impeller up to remove it (A, B).
24 EN
1032
Upper impeller
Check if the holes on the upper
impeller (2) are clogged. If they
are clogged, remove and clean the
impeller. Turn its nut to left to remove
the upper impeller (C, D).
Make sure that the nut is tightened well
when installing the upper impeller.
25 EN
Troubleshooting
Machine does not start.
• Power cable is unplugged. >>> Check if the power cable is plugged in.
• Fuse is blown. >>> Check the fuses in your house.
• Water is cut. >>> Make sure that the water inlet tap is open.
• Door of the machine is open. >>> Make sure that you have closed the door
of the machine.
• On / Off button is not pressed. >>> Make sure that you have turned on the
machine by pressing the On / Off button.
Dishes are not washed clean
• Dishes are not placed orderly in the machine. >>> Load the dishes as
described in the user manual.
• Selected programme is unsuitable. >>> Select a programme with a higher
temperature and cycle time.
• Impellers are stuck. >>> Prior to starting the programme, turn the lower and
upper impellers by hand to make sure that they rotate freely.
• Impeller holes are clogged. >>> Lower and upper impeller holes might
be clogged with food remnants such as lemon pips. Clean the impellers
regularly as illustrated in section "Cleaning and Care".
• Filters are clogged. >>> Check if the filter system is clean. Clean the filter
system regularly as illustrated in section "Cleaning and Care".
• Filters are installed incorrectly. >>> Check the filter system and make sure
that it is installed correctly.
• Baskets are overloaded. >>> Do not overload the baskets in excess of their
capacity.
• Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a
closed container if possible. For ease-of-storing, we recommend you to use
tablet detergents.
• Detergent is not sufficient. >>> If you are using powder detergent, adjust
the amount of detergent according to the soiling degree of your dishes and/
or programme definitions. We recommend you to use tablet detergents for
optimum results.
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse
aid if necessary. Increase the rinse aid setting if there is enough amount of
rinse aid in the machine.
• Detergent dispenser lid is left open. >>> Make sure that the detergent
dispenser lid is closed tightly after adding detergent.
6
26 EN
Dishes are not dry at the end of cycle
• Dishes are not placed orderly in the machine. >>> Place your dishes in a
way that no water will accumulate in them.
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse
aid if necessary. Increase the rinse aid setting if there is enough amount of
rinse aid in the machine.
• Machine is unloaded right after the programme is over. >>> Do not unload
your machine right after washing process is completed. Slightly open the
door and wait for evacuation of the steam inside for a while. Unload the
dishes after the pieces cool down to a touchable level. Start unloading
process from the lower basket. Thus, dropping of water remained on a piece
at upper basket onto the pieces at lower basket is prevented.
• Selected programme is unsuitable. >>> Since rinsing temperature is low at
programmes with short duration, drying performance will also be low. Select
programmes with longer duration for a higher drying performance.
• Surface quality of the kitchen utensils is deteriorated. >>> Desired washing
performance can not be obtained at kitchen utensils with deteriorated
surfaces and it is not suitable to use such utensils in terms of hygiene
as well. Also, water can not flow easily on deteriorated surfaces. It is not
recommended to wash such kitchen utensils in dishwasher.
C It is normal that drying complaints can be experienced with Teflon kitchen
utensils. It is associated with the structure of Teflon. Since the surface
tensions of Teflon and water are different, water droplets will remain as
beads on the Teflon surface.
Tea, cafe or lipstick stains remain on dishes.
• Selected programme is unsuitable. >>> Select a programme with a higher
temperature and cycle time.
• Surface quality of the kitchen utensils is deteriorated. >>> Tea and cafe
stains or other dye spots may not be cleaned in dishwasher when they
have penetrated in deteriorated surfaces. Desired washing performance
can not be obtained at kitchen utensils with deteriorated surfaces and it
is not suitable to use such utensils in terms of hygiene as well. It is not
recommended to wash such kitchen utensils in dishwasher.
• Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a
closed container if possible. For ease-of-storing, we recommend you to use
tablet detergents.
27 EN
Lime traces remain on dishes and glassware gains a misty appearance
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse
aid if necessary. Increase the rinse aid setting if there is enough amount of
rinse aid in the machine.
• Water hardness setting is low or salt level is insufficient >>> Measure the
hardness of the supply water appropriately and check the water hardness
setting.
• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling
hole while adding salt. Make sure that the salt reservoir lid is tightly closed
after finishing the filling process. Run the prewash programme to remove the
salt that spilled inside the machine. Since the salt granules that will remain
under the lid will dissolve during prewash, causing the lid loosen, check the
lid once again at the end of the programme.
There is a different odour in the machine
C A new machine has a peculiar odour. It will fade out after a couple of
washing.
• Filters are clogged. >>> Check if the filter system is clean. Clean the filter
system regularly as illustrated in section "Cleaning and Care".
• Dirty dishes are kept in dishwasher for 2-3 days. >>> If you are not going
to start the machine right after you have put the dishes into it, remove
the remnants on the dishes and run the Prewash programme without
detergent every 2 days. In such cases, do not close the door of the machine
completely in order to avoid odour build up in machine. You can also use
commercially available odour removers or machine cleaners.
28 EN
Rust, discoloration or surface deterioration occurs on dishes
• Salt leakage exists. >>> Salt may cause deterioration and oxidation on
metal surfaces. Pay attention not to spill salt around the salt filling hole
while adding salt. Make sure that the salt reservoir lid is tightly closed after
finishing the filling process. Run the prewash programme to remove the salt
that spilled inside the machine. Since the salt granules that will remain under
the lid will dissolve during prewash, causing the lid loosen, check the lid
once again at the end of the programme.
• Salty food remnants have remained on dishes for a long time. >>> If
silverware soiled with such foods will be kept waiting in machine, dirt must
be removed by prewash or dishes must be washed without being kept
waiting.
• Electric installation is not grounded. >>>Check if your machine is connected
to the actual grounding line. Otherwise, the static electric created in the
product causes arcs on the surfaces of metal items creating pores, removing
the protective cover on the surface and causing discoloration.
• Intensive cleansers such as bleaches are used. >>> Protective cover on
metal surfaces gets damaged and looses its efficiency in time when it gets in
contact with cleansers such as bleach. Do not wash your dishes with bleach.
• Metal items particularly such as knives are used for purposes other then
their intended uses. >>> Protective cover on the edges of knives may get
damaged when they are used for purposes such as opening cans. Do not
use metal kitchen utensils out of their intended uses.
• Silverware are made of low quality stainless steel. >>> Corrosion on such
items is inevitable; they should not be washed in dishwashers.
• Kitchen utensils that are already corroded are washed in dishwasher.
>>> Rust on a corroded item can migrate to other stainless steel surfaces
and cause corrosion on those surfaces as well. Such items should not be
washed in dishwashers.
29 EN
Detergent remains in detergent dispenser.
• Detergent dispenser was damp when adding detergent. >>> Make sure that
the detergent dispenser is dried well prior to filling it with detergent.
• Detergent is added long before the washing process. >>> Pay attention to
add detergent shortly before start-up of the washing.
• Opening of the detergent dispenser lid is prevented during washing. >>>
Place the dishes in a way that will not prevent the detergent dispenser lid
from opening and the water going into the machine from impellers.
• Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a
closed container if possible. For ease-of-storing, we recommend you to use
tablet detergents.
• Impeller holes are clogged. >>> Lower and upper impeller holes might
be clogged with food remnants such as lemon pips. Clean the impellers
regularly as illustrated in section "Cleaning and Care".
Decorations and ornaments on kitchen utensils are being erased.
C Decorated glasses and decorated luster porcelains are not suitable for
washing in the dishwasher. Manufacturers of glassware and porcelain
tableware items do not recommend washing such kitchen utensils in the
dishwashers either.
Dishes are scratched.
C Kitchen utensils that contains or are made of aluminum should not be
washed in dishwasher.
• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling
hole while adding salt. Spilled salt can cause scratches. Make sure that
the salt reservoir lid is tightly closed after finishing the filling process. Run
the prewash programme to remove the salt that spilled inside the machine.
Since the salt granules that will remain under the lid will dissolve during
prewash, causing the lid loosen, check the lid once again at the end of the
programme.
• Water hardness setting is low or salt level is insufficient >>> Measure the
hardness of the supply water appropriately and check the water hardness
setting.
• Dishes are not placed orderly in the machine. >>> When placing the glasses
and other glassware into the basket lean them not against other dishes but
the edges or racks of the basket or the glass support wire. Striking of the
glasses to each other or to other dishes due to the impact of water during
washing can cause breaks, or scratches on their surfaces.
30 EN
A smear remains on glasses that resembles milk stain which can not be
removed when wiped by hand. A bluish / rainbow appearance occurs when
the glass is pointed to light.
• Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled
rinse aid when adding rinse aid.
• Corrosion has occurred on glass due to soft water. >>> Measure the
hardness of the supply water appropriately and check the water hardness
setting. If your supply water is soft (<5 dH), do not use salt. Choose
programmes that wash in higher temperatures (e.g. 60-65°C). You can also
use glass protective detergents that are commercially available.
Foam forms in the machine.
• Dishes are washed with hand-wash detergent by hand but not rinsed before
placing them into the machine. >>> Hand-wash detergents do not contain
antifoam. There is no need to hand-wash the dishes before placing them into
the machine. Removing the coarse soil on the dishes under tap water, with a
tissue paper or fork will be sufficient.
• Rinse aid has spilled into the machine when adding rinse aid. >>> Take care
that rinse aid is not spilled in the machine when you are filling it. Clean any
spilled rinse ait with the help of a tissue paper/towel.
• Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the
rinse aid reservoir is closed after adding rinse aid.
Kitchen utensils are broken.
• Dishes are not placed orderly in the machine. >>> Load the dishes as
described in the user manual.
• Baskets are overloaded. >>> Do not overload the baskets in excess of their
capacity.
Water remains in the dishwasher at the end of the programme.
• Filters are clogged. >>> Check if the filter system is clean. Clean the filter
system regularly as illustrated in section "Cleaning and Care".
• Discharge hose is clogged/blocked. >>> Check the discharge hose. If
necessary, remove the discharge hose, clear the blockage and insert is as
illustrated in the user manual.
C If you cannot eliminate the problem although you follow the instructions in
this section, consult your dealer or the Authorised Service Agent. Never try to
repair a nonfunctional product yourself.
17 8995 01 00_AA_(EN) www.beko.com