Beko DPY8506GXB1 User Manual
Displayed below is the user manual for DPY8506GXB1 by Beko which is a product in the Tumble Dryers category. This manual has pages.
Related Manuals
Dryer
User Manual
DPY 8506 GXB1
2960311036_KM/060318.0950
EN
Please read this user manual first!
Dear Customer,
Thank you for prefering a Beko product. We hope that your product which has been
manufactured with high quality and technology will give you the best results. We advise you
to read through this manual and the other accompanying documentation carefully before
using your product and keep it for future reference. If you transfer the product to someone
else, give its manual as well. Pay attention to all details and warnings specified in the user
manual and follow the instructions given therein.
Use this user manual for the model indicated on the cover page.
Read the instructions.
Explanation of symbols
Throughout this user manual the following symbols are used:
CImportant information or useful hints about usage.
AWarning for hazardous situations with regard to life and property.
BWarning against electric shock.
Warning against hot surfaces.
Warning against fire hazard.
Packaging materials of the product are manufactured from recyclable materials in
accordance with our National Environment Regulations.
Do not dispose of the packaging wastes with the domestic waste or other wastes, discard
them to the dedicated collection points designated by the local authorities.
This product was manufactured using the latest technology in environmentally friendly conditions.
3 / EN
Dryer / User Manual
1 Important instructions for safety
and environment
Ths secton contans safety nstructons that wll help
protect from rsk of personal njury or property damage.
Falure to follow these nstructons shall vod any warranty.
1.1 General safety
• The dryer can be used by chldren at and above 8
years old and by persons whose physcal, sensory or
mental capabltes were not fully developed or who
lack experence and knowledge provded that they are
supervsed or traned on the safe usage of the product
and the rsks t brngs out. Chldren should not play wth
the product. Cleanng and mantenance works should not
be performed by chldren unless they are supervsed by
someone.
• Chldren of less than 3 years should be kept away unless
contnously supervsed.
• Adjustable feet should not be removed. The gap between
the dryer and the floor should not be reduced wth
materals such as carpet, wood and tape. Ths wll cause
problems wth the dryer.
• Always have the nstallaton and reparng procedures
carred out by the Authorized Service. Manufacturer
shall not be held lable for damages that may arse from
procedures carred out by unauthorzed persons.
• Never wash the dryer by sprayng or pourng water onto t!
There s the rsk of electrc shock!
4 / EN Dryer / User Manual
Important instructions for safety and
environment
1.1.1 Electrical safety
AElectrcal safety nstructons should be followed
whle electrcal connecton s made durng the
nstallaton.
AThe applance must not be suppled through an
external swtchng devce, such as a tmer,or
connected to a crcut that s regularly swtched on
and off by utlty.
• Connect the dryer to a grounded outlet protected by a
fuse at the value specfed on the type label. Have the
groundng nstallaton performed by a qualfed electrcan.
Our company shall not be lable for any damages that
wll arse when the dryer s used wthout groundng n
accordance wth the local regulatons.
• The voltage and allowed fuse protecton s stated on the
type label plate.
• The voltage specfed on the type label must be equal to
your mans voltage.
• Unplug the dryer when t s not n use.
• Unplug the dryer from the mans durng nstallaton,
mantenance, cleanng and repar works.
• Do not touch the plug wth wet hands! Never unplug by
pullng on the cable, always pull out by grabbng the plug.
• Do not use extenson cords, mult-plugs or adaptors to
connect the dryer to power supply n order to decrease the
rsk of fre and electrc shock.
• Power cable plug must be easly accessble after
nstallaton.
BDamaged mans cable should be changed notfyng
the Authorzed Servce.
5 / EN
Dryer / User Manual
Important instructions for safety and
environment
BIf the dryer s faulty, t must not be operated unless
t s repared by an authorzed servce agent! There s
the rsk of electrc shock!
1.1.2 Product safety
Superheatng of the clothes nsde of the dryer can
occur f you cancel the programme or n the event
of a power falure whlst the dryer s runnng, ths
concentraton of heat can cause self-combuston and
fre so always actvate the ventlaton programme
to cool down or quckly remove all laundry from the
dryer n order to hang them up and dsspate the
heat.
Ponts to be taken nto consderaton for fre
hazard:
Below specfed laundry or tems must not be dred n
the dryer consderng fre hazard.
• Unwashed laundry tems
• Items soled wth ol, acetone, alcohol, fuel ol,
kerosene, stan removers, turpentne, paraffn or
paraffn removers must be washed n hot water
wth plenty of detergent before beng dred n the
dryer.
For ths reason especally the tems contanng the
above specfed stans must be washed very well, to
do ths use adequate detergent and choose a hgh
washng temperature.
6 / EN Dryer / User Manual
Important instructions for safety and
environment
Below specfed laundry or tems must not be
dred n the dryer due to the fre hazard:
• Garments or pllows bolstered wth rubber foam
(latex foam), shower bonnets, water resstant
textles, materals wth rubber renforcement and
rubber foam pads.
• Clothng cleaned wth ndustral chemcals.
Items such as lghter, match, cons, metal parts,
needle etc. may damage the drum set or may lead to
functonal problems. Therefore check all the laundry
that you wll load nto your dryer.
Never stop your dryer before the programme
completes. If you must do ths, remove all laundry
quckly and lay them out to dsspate the heat.
Clothes that are washed nadequately may gnte on
ther own and even may gnte after dryng ends.
• You must provde enough ventlaton n order to prevent
gases extng from devces operatng wth other types of
fuels ncludng the naked flame from accumulatng n the
room due to the back fre effect.
AUnderwear that contans metal renforcements
should not be dred n the dryer. Dryer may be
damaged f metal renforcements come loose and
break off durng dryng.
CUse softeners and smlar products n accordance
wth the nstructons of ther manufacturers.
CAlways clean the lnt flter before or after each
loadng. Never operate the dryer wthout the lnt
flter nstalled.
7 / EN
Dryer / User Manual
Important instructions for safety and
environment
• Never attempt to repar the dryer by yourself. Do not
perform any repar or replacement procedures on the
product even f you know or have the ablty to perform
the requred procedure unless t s clearly suggested n the
operatng nstructons or the publshed servce manual.
Otherwse, you wll be puttng your lfe and others’ lves n
danger.
• There must not be a lockable, sldng or hnged door that
may block the openng of the loadng door n the place
where your dryer s to be nstalled.
• Install your dryer at places sutable for home use.
(Bathroom, closed balcony, garage etc.)
• Make sure that pets do not enter the dryer. Check the
nsde of the dryer before operatng t.
• Do not lean on the loadng door of your dryer when t s
open, otherwse t may fall over.
• The lnt must not be allowed to accumulate around the
tumble dryer
8 / EN Dryer / User Manual
Important instructions for safety and
environment
• The tumble dryer s not to be used f ndustral chemcals
have been used for cleanng.
• Fabrc softeners, or smlar products.should be used as
specfed by the fabrc softener nstructons.
• Exhaust ar must not be dscharged nto a flue whch s
used for exhaustng fumes from applances burnng gas or
other fuels.
1.2 Mounting over a washing machine
• A fxng devce should be used between the two machnes
when nstallng the dryer above a washng machne. The
fttng devce must be nstalled by the authorzed servce
agent.
• Total weght of the washng machne and the dryer -wth
full load- when they are placed on top of each other
reaches to approx. 180 klograms. Place the products on a
sold floor that has suffcent load carryng capacty!
AWashng machne cannot be placed on the dryer.
Pay attenton to the above warnngs durng the
nstallaton on your washng machne.
Installation Table for Washing Machine and Dryer
Dryer
Depth
Washing Machine Depth
62 cm 60 cm 54 cm 50 cm 49 cm 45 cm 40 cm
54 cm Can be installed Can be
installed Cannot be
installed
60 cm Can be installed Cannot be
installed
9 / EN
Dryer / User Manual
Important instructions for safety and
environment
1.3 Intended use
• Dryer has been desgned for domestc use. It s not sutable
for commercal use and t must not be used out of ts
ntended use.
• Use the dryer only for dryng laundry that are marked
accordngly.
• The manufacturer waves any responsblty arsen from
ncorrect usage or transportaton.
• The servce lfe of the dryer that you purchased s 10 years.
Durng ths perod, orgnal spare parts wll be avalable to
operate the dryer properly.
1.4 Child safety
• Packagng materals are dangerous for the chldren. Keep
packagng materals away from chldren.
• Electrcal products are dangerous for the chldren. Keep
chldren away from the product when t s operatng. Do
not let them tamper wth the dryer. Use the chld-proof
lock n order to prevent the chldren to tamper wth the
dryer.
CChld-proof lock s on the control panel.
(See Chld lock)
• Keep loadng door closed even when the dryer s not n
use.
10 / EN Dryer / User Manual
Important instructions for safety and
environment
1.5 Compliance with the WEEE regulation
and disposing of the waste product
Ths product comples wth EU WEEE Drectve
(2012/19/EU). Ths product bears a classfcaton
symbol for waste electrcal and electronc equpment
(WEEE).
Ths product has been manufactured wth hgh
qualty parts and materals whch can be reused and are
sutable for recyclng. Do not dspose of the waste product
wth normal domestc and other wastes at the end of ts
servce lfe. Take t to the collecton center for the recyclng
of electrcal and electronc equpment. Please consult your
local authortes to learn about these collecton centers.
1.6 Compliance with RoHS Directive:
The product you have purchased comples wth EU RoHS
Drectve (2011/65/EU). It does not contan harmful and
prohbted materals specfed n the Drectve.
1.7 Package information
Packagng materals of the product are manufactured
from recyclable materals n accordance wth our Natonal
Envronment Regulatons. Do not dspose of the packagng
materals together wth the domestc or other wastes. Take
them to the packagng materal collecton ponts desgnated
by the local authortes.
11 / EN
Dryer / User Manual
Important instructions for safety and
environment
1.8 Technical Specifications
* Mn. heght: Heght wth adjustable feet are closed.
Max. heght: Heght wth adjustable feet are opened
maxmum.
** Dry laundry weght before washng.
*** Type label s located behnd the loadng door.
CTechncal specfcatons of the dryer are subject to
specfcaton wthout notce to mprove the qualty of
the product.
CFgures n ths manual are schematc and may not
match the product exactly.
C
Values stated on markers on the dryer or n the other
publshed documentaton accompanyng wth the
dryer are obtaned n laboratory n accordance wth
the relevant standards. Dependng on operatonal and
envronmental condtons of the dryer, these values
may vary.
EN
Heght (Mn. / Max.) 84,6 cm / 86,6 cm*
Wdth 59,7 cm
Depth 65,4 cm
Capacty (max.) 8 kg**
Net weght (± 4 kg) 51 kg
Wdth
See type label***Voltage
Rated power nput
12 / EN Dryer / User Manual
2 Your Dryer
2.1 Package Contents
12 3 5
4
1. Water drain hose *
2. Filter drawer spare sponge*
3. User Manual
4. Drying basket*
5. Drying basket user manual*
*It can be supplied with your machine depending on its model.
13 / EN
Dryer / User Manual
3 Installation
Before the calling the nearest Authorized
Service for the installation of the dryer,
ensure that electrical installation and water
drain is appropriate referring to the user’s
manual. (See 3.3 Connecting to the
drain and 3.5 Electrical connection) If
they are not suitable, contact a qualified
electrician and technician to make necessary
arrangements.
CPreparation of the dryer's location
as well as the electrical and
waste water installations is under
customer's responsibility.
APrior to installation, visually check
if the dryer has any defects on
it. If the drier is damaged, do
not have it installed. Damaged
products cause risks for your
safety.
ALet your dryer wait for 12 hours
before starting to use it.
3.1 Appropriate installation
location
Install the dryer on a stable and level surface.
Dryer is heavy. Do not move it by yourself.
• Operate your dryer in a well ventilated,
dust-free environment.
• The gap between the dryer and the
surface should not be reduced by the
materials such as carpet, wood and tape.
• Do not cover the ventilation grills of the
dryer.
• There must not be a lockable, sliding or
hinged door that may block the opening
of the loading door in the place where
your dryer is to be installed.
• Once the dryer is installed, it should stay
at the same place where its connections
have been made. When installing the
dryer, make sure that its rear wall does
not touch anywhere (tap, socket, etc.).
• Place the dryer at least 1 cm away from
the edges of other furniture.
• Your dryer can be operated at
temperatures between +5°C and +35°C.
If the operating conditions fall outside
of this range, operation of the dryer
will be adversely affected and it can get
damaged.
• The rear surface of the tumble dryer
shall be placed against a wall.
BDo not place the dryer on the
power cable.
3.2 Removing the
transportation safety
assembly
ARemove the transportation safety
assembly before using the dryer
for the first time.
• Open the loading door.
• There is a nylon bag inside the drum that
contains a piece of styrofoam. Hold it
from its section marked with XX XX.
• Pull the nylon towards yourself and
remove the transportation safety
assembly.
ACheck that no part of the
transportation safety assembly
remains inside the drum.
14 / EN Dryer / User Manual
Installation
3.3 Connecting to the drain
In products equipped with condenser
unit, water accumulates in the water tank
during the drying cycle. You should drain
accumulated water after each drying cycle.
You can directly drain accumulated water
through the water drain hose supplied with
the product instead of periodically draining
the water collected in the water tank.
Connecting the water drain hose
1-2 Pull hose at the behnd of the dryer
by hand n order to dsconnect t from
where t s connected. Do not use any
tools to remove the hose.
3 Connect one end of the dran hose
suppled wth the dryer to the
connecton pont from where you
removed the hose of the product n
prevous step.
4 Connect the other end of the dran hose
drectly to the wastewater dran or to
the washbasn.
1
3 4
2
AHose connection should be made
in a safe manner. Your drain
house will be flooded if the hose
comes out of its housing during
water discharge.
CWater drain hose should be
attached to a height of maximum
80 cm.
CMake sure that the water drain
hose is not stepped on and it is
not folded between the drain and
the machine.
3.4 Adjusting the feet
• In order to ensure that the dryer
operates more silently and vibration-
free, it must stand level and balanced
on its feet. Balance the machine by
adjusting the feet.
• Turn the feet to left or right until the
dryer stands level and firmly.
CNever unscrew the adjustable
feet from their housings.
3.5 Electrical connection
For specific instructions for electrical
connection required during installation (see
1.1.1 Electrical Safety)
3.6 Transportation of the dryer
Unplug the dryer before transporting it.
Drain all water that has remained in the dryer.
If direct water drain connection is made, then
remove the hose connections.
A
We recommend carrying the
dryer in upright position. If it is
not possible to carry the machine
in the upright position, we
recommend carrying it by tilting
towards the right side when
looked from the front.
15 / EN
Dryer / User Manual
Installation
3.7 Warnings about sounds
CIt is normal to hear a metallic
noise from the compressor
sometimes during operation.
CWater collected during operation
is pumped to water tank. It is
normal to hear pumping noise
during this process.
3.8 Changing the illumination
lamp
In case an illumination lamp is used in your
laundry dryer.To change the Bulb/LED used
for illumination of your tumble dryer, call your
Authorized Service.
The lamp(s) used in this appliance is not
suitable for household room illumination.
The intended purpose of this lamp is to
assist the user to place laundry in the tumble
dryer in a comfortable way. The lamps used
in this appliance have to withstand extreme
physical conditions such as vibrations and
temperatures above 50 °C
16 / EN Dryer / User Manual
4. Preparation
4.1 Laundry suitable for drying in the dryer
Always obey the instructions given on the garment tags. Dry only the laundry having a label
stating that they are suitable for drying in a dryer and make sure that you select the
appropriate programme.
Drying
Settings
At any temperature
At high temperature
At medium
temperature
At low temperature
Without heating
Hang to dry
Lay to dry
Hang wet to dry
Lay in shadow
to dry
Dry-cleanable
Iron -
IRON
Dry or Steam
Iron at high
temperature
Iron at medium
temperature Iron at low
temperature
Do not iron
Iron without
steam
Maximum temperature 200 0C150 0C110 0C
LAUNDRY DRYING SYMBOLS
Drying
Symbols Suitable for
dryer No Iron Sensitive /
Delicate dry
Do not dry
with dryer
Do not dry Do not dry-
clean
4.2 Laundry not suitable for
drying in the dryer
CDelicate embroidered fabrics,
woolen, silk garments, delicate
and valuable fabrics, airtight
items and tulle curtains are not
suitable for machine drying.
4.3 Preparing laundry for
drying
• Laundry may be tangled with each other
after washing. Separate the laundry
items before placing them into the dryer.
• Dry garments having metal accessories
such as zippers, inside out.
• Fasten the zippers, hooks and buckles
and button sheets.
4.4 Things to be done for
energy saving
Following information will help you use the
dryer in an ecological and energy-efficient
manner.
• Spin your laundry at the highest speed
possible when washing them. Thus, the
drying time is shortened and energy
consumption is reduced.
• Sort out the laundry depending on their
type and thickness. Dry the same type
of laundry together. For example thin
kitchen towels and table clothes dries
earlier than thick bathroom towels.
• Follow the instructions in the user
manual for programme selection.
• Do not open the loading door of the
machine during drying unless necessary.
If you must certainly open the loading
door, do not to keep it open for a long
time.
17 / EN
Dryer / User Manual
Preparation
• Do not add wet laundry while the dryer is
in operation
• Clean the lint filter before or after each
drying cycle. (See 6.1 Cleaning Lint
Filter / Loading Door Inner Surface)
• Clean the filter periodically when there
is visible air collection on it or when
the symbol lights up, if there is a filter
drawer cleaning warning symbol « »
available. (See 6. 4 Cleaning the filter
drawer)
• Ventilate the room, where the dryer is
located, well during drying.
4.5 Correct load capacity
Follow the instructions in the “Programme
selection and consumption table”. Do not
load more than the capacity values stated in
the table.
CIt is not recommended to load
the dryer with laundry exceeding
the level indicated in the figure.
Drying performance will degrade
when the machine is overloaded.
Furthermore, dryer and the laundry
can get damaged.
Following weights are given as examples.
Laundry Approximate
weights (g)*
Cotton quit covers
(double) 1500
Cotton quit covers
(single) 1000
Bed sheets (double) 500
Bed sheets (single) 350
Large tablecloths 700
Small tablecloths 250
Tea napkins 100
Bath towels 700
Hand towels 350
Blouses 150
Cotton shirts 300
Shirts 250
Cotton dresses 500
Dresses 350
Jeans 700
Handkerchiefs (10
pieces) 100
T-Shirts 125
*Dry laundry weight before washing.
18 / EN Dryer / User Manual
5 Operating the product
5.1 Control panel
1. Programme Selection knob
2. Dryness Level Adjustment button
3. Audio Warning Level button
4. Display
5. On /Off/Cancel button
6. Start/Pause button
7. End Time button
8. Favourite button
9. Timer Programmes Selection button
10. Anti-creasing button
1 32 4 5 6
78910
Remaining time indicator*
Filter drawer cleaning warning symbol
Filter cleaning warning symbol
Smart grid symbol
Child lock warning symbol
Water tank warning symbol
End time symbol
Start / Pause symbol
Steam tank warning symbol
Dryness level
*Time that appears on display indicates the
remaining time until the end of the programme
and changes according to the dampness level
of the laundry and model of the dryer.
Programme progress bar
Audio warning smbol
5.2 Display symbols
19 / EN
Dryer / User Manual
Operating the product
5.3 Preparing the machine
1. Plug in your machine.
2. Place the laundry in the machine.
3. Press the On/Off/Cancel button for 1
second (long).
4. When your machine is operated for the
first time, it starts with the declaration
programme (wardrobe dryness for
cottons.)
CPressing the On/Off/Cancel
button does not mean that the
programme has started. Press
Start / Pause button to start the
program.
5.4 Programme selection
1. Decide the appropriate programme from
the table below which includes drying
levels.
2. Select the desired programme with the
Programme Selection knob.
Extra Dry
Only the cotton laundry is
dried at normal temperature.
Thick and multi layered
laundry (towels, linens, jeans
and etc.) are dried in a way
that they do not require
ironing before being placed in
the wardrobe.
Cupboard
Dry
Normal laundry (tablecloths,
underwear and etc.) are dried
in a way that they do not
require ironing before being
placed in the wardrobe.
Iron Dry
Normal laundry (shirts,
dresses and etc.) are dried
ready to be ironed.
CFor further programme details,
see "Programme selection and
consumption table"..
5.5 Main programmes
Depending on the fabric type, the following
main programmes are available.
• Cottons
Dry durable laundry with this programme.
Dries at normal temperature. It is
recommended to use for your cotton items
(bed sheets, quilt covers, towels, bathrobes,
etc.).
• Synthetcs
Dry less durable laundry with this
programme. Recommended for synthetics.
5.6 Additional programmes
For special cases, following additional
programmes are available in the machine.
CAdditional programs may differ
according to the features of your
machine.
CTo obtain better results from
your dryer, your laundry must be
washed at suitable programmes
and spun at the recommended
spin speeds in the washing
machine..
• Jeans
Use this programme to dry your jeans that
are spun at high speeds in the washing
machine.
• Mx
Use this programme to dry non-pigmenting
synthetic and cotton laundry items together.
• WoolProtect
Use this programme to dry woolen garments
such as jumpers that are washed according to
the instructions.
It is recomended that garments would be
removed at the end of the programme.
• Nght
In this programme the level of noise emitted
to the environment will be the lowest.
Volume level will be fifty percent lower with
respect to the ‘wardrobe dry for cottons’
programme.
20 / EN Dryer / User Manual
Operating the product
• Express
You can use this programme to dry your
cotton laundry that you have spun at high
speeds in your washing machine. This
programme dries 1 kg cotton laundry (3 Shirts
/ 3 T-shirts) in 49 minutes.
• BabyProtect
Ths programme s used for baby clothes that
bear machne dryable approval on ts label.
• Daly
This programme is used to dry cottons and
synthetics daily, and lasts for 100 minutes.
• Shrts 30’
Use this programme to make 2 shirts ready
for ironing in 30 minutes.
CThere may be a little moisture
on the shirts at the end of the
programme. We recommend
you not to leave the shirts in the
dryer.
• Delcates
You can dry your highly delicate laundry
(silk blouses, fine underwear, etc.) that
are suitable for drying or laundry which
is advised to be hand-washed at a lower
temperature.
CIt is recommended to use a cloth
bag to avoid certain delicate
garments and laundry from
getting creased or damaged. Take
your laundry immediately out of
the dryer and hang them after
the programme ends in order to
prevent them being creased.
• Freshen Up
Only ventilation is performed for 10 minutes
without blowing hot air. You can air the
clothes that have been kept at closed
environments for a long time and deodorize
unpleasant odors thanks to this programme.
• Tmer programmes
You can select one of the 10 min., 20 min., 30
min., 40 min., 50 min., 60 min., 80 min., 100
min.,
120 min., 140 min. and 160 min. timer
programmes to achieve the desired final
drying level at low temperatures.
CWith this programme, the
machine dries for the time
selected regardless of the
dryness level.
21 / EN
Dryer / User Manual
Operating the product
5.7 Programme selection and consumption table
* : Energy Label standard program (EN 61121:2012) “All the filters must be cleaned prior to
test series.”All values given in the table have been fixed according to EN 61121:2012 Standard.
These values may deviate from the values in the table according to the laundry type, laundry
spin speed, environmental conditions and voltage fluctuations.
Programs Capacity
(kg) Spin speed in washing
machine (rpm) Approximate amount of
remaining humidity Drying time
(minutes)
Cottons / Coloreds
AExtra dry 8 1000 % 60 184
ACupboard dry 8 / 4 1000 % 60 174 / 108
AIron dry 8 1000 % 60 139
Night 8 1000 % 60 240
Babyprotect 3 1000 % 60 95
Shirts 30’ 0,5 1200 % 60 30
Jeans 4 1200 % 50 117
Daily 4 1200 % 50 100
Mix 4 1000 % 60 110
Express 1 1200 % 50 49
Delicates 2 600 % 40 50
Wool protect 1,5 600 % 50 146
Synthetics
BCupboard dry 4 800 % 40 75
BIron dry 4 800 % 40 59
Energy consumption values
Programs Capacity
(kg) Spin speed in washing
machine (rpm) Approximate amount of
remaining humidity
Energy
consumption
value kWh
Cottons linen Ready to wear* 8 / 4 1000 % 60 1,42 / 0,81
Cottons Ready to iron 8 1000 % 60 1,05
Synthetics Ready to wear 4 800 % 40 0,51
Power consumption of the off-mode for the standart cotton programme at full load, PO (W) 0,5
Power consumption of the left-on mode for the standart cotton programme at full load, PL (W) 1,0
Contains fluorinated greenhouse gases covered by the Kyoto Protocol. Hermetically sealed.
R134a / 0,34 kg - GWP:1430 - 0,486 tCO2e
„Cotton cupboard dry programme“ used at full and partial load is the standard
drying programme to which the information in the label and the fiche relates, that
this programme is suitable for drying normal wet cotton laundry and that it is the
most efficient programme in terms of energy consumption for cotton.
22 / EN Dryer / User Manual
Operating the product
5.8 Auxiliary functions
Audio Warning
The machine will give an audio warning
when the programme comes to an end. Use
the Audio Warning Level button to adjust
the sound level.
CYou can change the sound level
either before the programme
starts or while the programme is
in progress.
Volume level low
Volume level high
Dryness level adjustment selection
Dryness level adjustment button is
used to adjust the required dryness level.
Programme duration can change depending
on the selection.
CYou can activate this function
only before the programme has
started.
Drying level damp
Drying level normal
Drying level extra
23 / EN
Dryer / User Manual
Operating the product
Favourite selection button
A programme with the set auxiliary function
is saved with Favourite selection button.
When the product is switched on and off,
features of the saved programme is displayed
by means of Favourite selection button.
1. Select the programme with the
programme button; select the auxiliary
functions such as Anti-creasing, Dryness
Level etc.
2. Press and hold the Favourite selection
button for about 3 seconds. Features of
set programme will be saved.
End time
With the End Time function, the end time
of the programme may be delayed up to 24
hours. The time on the display is the total of
normal drying time and end time.
• Open the loading door and put the
laundry in.
• Select the drying program.
Anti-creasing
Anti-creasing programme duration may
be changed with the Anti-creasing
selection button. You can use Anti-creasing
function to prevent laundry from creasing if
you will not take the laundry out after the
program has come to an end. This
programme rotates the laundry in every 240
second for selected time to prevent creasing.
Following images identify the level changes.
Anti-creasing 0 minute
Anti-creasing 30 minute
Anti-creasing 60 minute
Anti-creasing 120 minute
CPress Anti-creasing button to
activate this function.
CAnti-creasing symbol will illuminate
at the end of the programme if
Anti-creasing function is activated.
24 / EN Dryer / User Manual
Operating the product
Press End Time button to set the desired
time delay.
• Press Start/Pause button. Time Delaying
starts countdown and the time delaying
symbol lights up on the display. The “:” in
the middle of the displayed delay time
will flash.
• Additional laundry may be loaded / taken
out during the End Time period. At the
end of the End Time countdown process,
End Time symbol disappears, drying
process starts and the programme
duration is displayed.
CIf loading door is opened and
closed during the End Time
duration, the programme will
switch to pause mode. End Time
function should be resumed with
pressing Start/Pause button.
Changing the End time
If you want to change the time during
countdown:
• End Time is deactivated when the dryer
is switched off and on with On/Off/
Cancel button. Restart the dryer and
repeat the End Time procedure for the
desired time.
• When your dryer is operated for the
first time, it starts with the declaration
programme (wardrobe dryness for
cottons).
Canceling End time function
If you want to cancel the End Time
countdown and start the programme
immediately:
• End Time is deactivated when the dryer
is switched off and on with On/Off/
Cancel button.
• Press Start/Pause button to start
the programme you have previously
selected.
5.9 Warning symbols
CWarning symbols may differ
according to the model of your
machine.
Lint filter cleaning
When the programme is completed, a
warning symbol will appear continously
indicating that the filter needs to be cleaned.
CFor detailed information, see 6
Maintenance and cleaning.
CIf the filter cleaning symbol
flashes continuously, see 7
Troubleshooting.
Draining the water tank
When the programme is completed, a
warning symbol will appear continously
to remind that the water tank needs to be
drained.
CFor detailed information, see 6
Maintenance and cleaning.
If the water tank becomes full while the
programme is running, the warning symbol
will start to flash and the dryer will pause.
Drain the water in the water tank and
press Start / Pause button to resume the
programme. The warning symbol turns off
and the programme resumes operating.
Cleaning the filter drawer
Warning symbol flashes to remind that the
filter drawer needs to be cleaned.
CFor detailed information, see 6
Maintenance and cleaning.
25 / EN
Dryer / User Manual
Operating the product
Loading door open
This warning symbol Pause appears and
programme progress symbol flashes when
the loading door of the dryer is open.
5.10 Starting the programme
Press the Start/Pause button to start the
program.
Start symbol will light up to indicate that
the programme has started and “:” symbol in
the middle of the remaining time will keep
flashing. Drying and programme progress bar
will be displayed alternately.
5.11.Progress of programme
5.12 Child Lock
Machine is equipped with a Child Lock
which prevents interfering with the current
programme flow by pressing any button.
To activate the Child Lock:
• Press and hold Childproof Lock button
for 3 seconds.
• Child Lock symbol will appear on the
display when the Child Lock is activated.
• All buttons except the On/Off/Cancel
and Child Lock button on the control
panel are deactivated when the Child
Lock is active.
• Display symbols will not change even
if the position of Programme Selection
knob is changed while the child lock
button is active.
• When the programme selection knob is
turned and function buttons are pressed
Child Lock warning will be displayed.
• To start a new programme after the
current programme is over or to interrupt
the current programme, the Child Lock
should be deactivated.
To deactivate the childproof lock:
• Press and hold Child Lock button for 3
seconds.
• Child Lock is deactivated when the dryer
is switched off and on with On/Off/
Cancel button.
5.13 Changing the programme
after it has started
• After the dryer starts operation, you can
change the selected programme and dry
your laundry in a different programme.
• Press and hold Start / Pause button for 1
seconds to pause the programme.
• Select desired programme by turning the
Programme Selection knob.
• Press the Start/Pause button to start
the program.
Adding / removing laundry while the
dryer is in operation
• In order to add or take out laundry after
the drying programme has started:
• Press the Start/Pause button to switch
the dryer to Pause mode. Drying process
will pause.
• While in Pause mode, open the loading
door, add or take out laundry and close
the loading door.
• Press the Start/Pause button to resume
the program.
26 / EN Dryer / User Manual
Operating the product
CAny laundry added after the
drying process has started may
cause the clothes that are already
dried in the machine intermingle
with wet clothes and the result
will be wet laundry after the
drying process is over.
CYou may repeat laundry adding
or removing process as many
times as you desire during
drying. However, this process will
increase the programme time and
energy consumption since the
drying process will be interrupted
repeatedly. Therefore, it is
recommended to add laundry
before the drying programme has
started.
CIf you select a new programme by
turning the Programme Selection
knob while your drier is in Pause
mode, then the current program
is aborted and new programme
information is displayed.
Do not touch the inner surface of
the drum when adding or taking
out laundry while a programme is
running. Drum surface and dryer
air within is hot.
5.14 Canceling the programme
To cancel the programme after the dryer is
started:
• Press and hold Start / Pause button for
1 seconds to pause the programme and
turn the programme selection knob.
• Press and hold On / Off / Cancel Button
for 3 seconds and the programme will be
cancelled.
AAs the dried laundry will be
excessively hot when you cancel
the programme while the dryer
is running, activate the Refresh
programme to cool them down.
5.15 End of programme
When the programme comes to an end
Lint filter cleaning and Water tank warning
symbols light up in the programme follow-up
indicator. To turn off the dryer press On / Off
/ Cancel button.
C2-hour Anti-creasing program will
be activated if the laundry is not
taken out after the program has
come to an end.
CClean the lint filter after each
drying. See 6.1 Cleaning lint
filter and loading door inner
surface.
CDrain the water tank after each
drying cycle. See 6.3 Draining
the water tank.
27 / EN
Dryer / User Manual
6 Maintenance and cleaning
Service life of product extends and
frequently experienced problems will be
reduced if it is cleaned at regular intervals.
6.1 Cleaning Lint Filter /
Loading Door Inner Surface
Lint and fiber released from the laundry to
the air during the drying cycle are collected in
the Lint Filter.
CSuch fiber and lint are generally
formed during wearing and
washing.
AAlways clean the lint filter and the
inner surfaces of the loading door
after each drying process.
CYou can clean the lint filter
housing with a vacuum cleaner.
To clean the lint filter:
• Open the loading door.
• Remove the lint filter by pulling it up and
open the lint filter.
• Clean lint, fiber, and cotton raveling by
hand or with a soft piece of cloth.
• Close the lint filter and place it back into
its housing.
• A layer can build up on the filter pores
that can cause clogging of the filter after
using the dryer for a while. Wash the
lint filter with warm water to remove
the layer that builds up on the lint filter
surface. Dry the lint filter completely
before reinstalling it.
• Clean the entire inner surface of the
loading door and loading door gasket
with a soft damp cloth.
6.2 Cleaning the sensor
There are dampness sensors in the dryer
that detect whether the laundry is dry or not.
To clean the sensors:
• Open the loading door of the dryer.
• Allow the machine to cool down if it is
still hot due to the drying process.
• Wipe the metal surfaces of the sensor
with a soft cloth, dampened with vinegar
and dry them.
28 / EN Dryer / User Manual
Maintenance and cleaning
CClean metal surfaces of the
sensors 4 times a year.
CDo not use metal tools when
cleaning metal surfaces of the
sensors.
ANever use solvents, cleaning
agents or similar substances for
cleaning due to the risk of fire and
explosion!
6.3 Draining the water tank
Dampness of the laundry is removed and
condensed during drying process and the
water that arise accumulates in the water
tank. Drain the water tank after each drying
cycle.
ACondensed water is not drinkable!
ANever remove the water tank
when the program is running!
If you forget to drain the water tank, the
machine will stop during the subsequent
drying cycles when the water tank is full and
the Water Tank warning symbol will flash.
If this is the case, drain the water tank and
press Start / Pause button to resume the
drying cycle.
To drain the water tank:
Pull the drawer and remove the water tank
carefully.
• Drain the water in the tank.
• If there is lint accumulation in the funnel
of the water tank, clean it under running
water.
• Place the water tank into its seat.
CIf the direct water draining is used
as an option, there is no need to
empty the water tank.
6.4 Cleaning the filter drawer
Lint and fiber that could not be captured
by the lint filter are blocked in the filter
drawer behind the kick plate. Clean the
filter periodically when there is visible air
collection on it or when the symbol lights up,
if there is a filter drawer cleaning warning
symbol « » available.
There is an one stage filter. This one stage
filter is from sponge
To clean the filter drawer:
29 / EN
Dryer / User Manual
Maintenance and cleaning
• Press the kick plate button to open the
kick plate.
• Remove the filter drawer cover by
turning it in the direction of arrow.
• Pull out the filter drawer.
• Open the filter drawer by pressing the
red button.
• Take out the filter drawer sponge.
• Wash the filter drawer sponge by hand
to remove the fiber and lint on the
surface. After washing the sponge,
squeeze it by hand and remove the
excess water. Well-dry the sponge
before storing it.
CIt is not necessary to clean
the sponge if lint and fiber
accumulation on it is not
significant.
• Place the sponge back into its place.
CPlease place the sponge carefully
inside the frame of the filter
cassette shown by arrows in order
to avoid squeezing when filter
drawer closed”.:
30 / EN Dryer / User Manual
Maintenance and cleaning
• Close the filter drawer as to lock the red
button.
• Place the filter drawer back into its place,
turn the filter drawer cover in the arrow
direction and close it securely.
• Close the kick plate cover.
ADrying without the filter drawer
sponge in place will damage the
machine!
CA dirty lint filter and filter drawer
will cause longer drying periods
and higher energy consumption.
6.5 Cleaning the evaporator
Clean the lint accumulated on the fins of the
evaporator located behind the filter drawer
with a vacuum cleaner.
AYou can also clean by hand
provided that you wear protective
gloves. Do not attempt to clean
with bare hands. Evaporator fins
can harm your hand.
31 / EN
Dryer / User Manual
7 Troubleshooting
Drying process takes too much time.
• Pores of the lnt flter are clogged. >>> Wash the lnt flter wth warm water.
• Flter drawer may be blocked>>>clean the foam nsde the flter drawer.
• Ventlaton grds on the front sde of the machne are blocked. >>> Remove the objects
(f any) that block ventlaton n front of the ventlaton grds.
• Ventlaton s not suffcent snce the room where the machne s nstalled s very small.
Open the door and wndow of the room to avod the room temperature ncrease too
much.
• Lme depost has bult up on the dampness sensor. >>> Clean the dampness sensor.
• Excessve laundry s loaded. >>> Do not load the dryer n excess.
• Laundry s not spun suffcently. >>> Spn your laundry at a hgher speed n your
washng machne.
Laundry comes out wet at the end of drying.
CAfter drying, the hot clothes feel damper than their actual dampness level.
• It s lkely that the selected programme dd not sut the laundry type.>>>Checkng the
care labels on clothes, select approprate programme for the laundry type or use tmer
programmes n addton.
• Pores of the lnt flter are clogged. >>> Wash the lnt flter wth warm water.
• Flter drawer may be blocked>>>clean the foam nsde the flter drawer.
• Excessve laundry s loaded. >>> Do not load the dryer n excess.
• Laundry s not spun suffcently. >>> Spn your laundry at a hgher speed n your
washng machne.
Dryer does not switch on or the programme does not start. Dryer does not start when it is
set.
• It s not plugged n. >>> Make sure that the machne s plugged n.
• The loadng door s ajar. >>> Make sure that the loadng door s closed securely.
• Programme s not selected or the Start / Pause / Cancel button s not pressed. >>>
Make sure that the programme s selected and the machne s not n Pause mode.
• Chldproof Lock s actvated. >>> Deactvate the Chldproof Lock.
Programme is interrupted without any cause.
• Loadng door s ajar. >>> Make sure that the loadng door s closed securely.
• There was a power falure. >>> Press Start / Pause / Cancel button to start the
programme.
• Water tank s full. >>> Dran the water tank.
Laundry has shrunk, become felted or deteriorated.
• A programme sutable for the laundry type s not used. >>> Check the garment tag
and select a programme sutable for the fabrc type.
32 / EN Dryer / User Manual
Troubleshooting
Drum lighting does not turn on. (On models with lamp)
• Dryer s not swtched on wth the On / Off button. >>> Make sure that the dryer s
swtched on.
• Lamp s defectve. >>> Call Authorzed Servce Agent to have the lamp replaced.
End/Anti-creasing symbol is on.
• Ant-creasng programme s actvated n order to prevent laundry that has remaned n
the machne from creasng. >>> Turn off the dryer and take out the laundry.
End symbol is on.
• Programme is over. Turn off the dryer and take out the laundry.
Lint Filter Cleaning symbol is on.
• Lnt flter s not cleaned. >>> Clean the lnt flter.
Lint Filter Cleaning symbol is flashing.
• Flter housng s clogged wth lnts. >>> Clean the lnt flter housng.
• A depost has bult up on the lnt flter pores that may cause cloggng. >>> Wash the
lnt flter wth warm water.
• Flter drawer s clogged. >>> Clean the sponge and the flter cloth n the flter drawer.
Water leaks from the loading door
• Lnt has accumulated on the nner surfaces of the loadng door and on the surfaces
of the loadng door gasket. >>> Clean the nner surfaces of the loadng door and the
surfaces of the loadng door gasket.
Loading door opens spontaneously.
• Loadng door s ajar. >>> Push the loadng door to close untl you hear a lockng sound.
Water Tank warning symbol is on/flashing.
• Water tank s full. >>> Dran the water tank.
• Water dranng hose s bent. >>> If the product s connected drectly to a wastewater
dran, check the water dran hose.
Filter Drawer Cleaning warning symbol is flashing.
• Flter drawer s not cleaned. >>> Clean the sponge and the flter cloth n the flter
drawer.
AIf you cannot eliminate the problem although you follow the instructions in this
section, consult your dealer or the Authorized Service Agent. Never try to repair a
nonfunctional product yourself.
CIn an event that you encounter an issue on any part on your appliance, you can ask
for a replacement by contacting the authorized service with the appliance model
number.
Operating the appliance with non-authentic parts may lead the appliance to
malfunction.
Manufacturer and distributor are not liable for malfunctions resulting from using
non-authentic parts.
33 / EN
Dryer / User Manual
Make sure that you have an earthed power
outlet socket rated at 13 amps (minimum).
Attention!
If you use your dryer as built-in, the socket
must be reachable after installation, or a
separate switch (which can disconnect the
two poles) must be used in the installation.
Check for suitability.
For a permanent connection, a master switch
with at least 3mm contact clearance and
minumum 13 A rating must be used.
Electrical requirements
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
We recommend that this appliance be
connected to the mains supply via a suitable
switched and fused socket in a readily
accessible position.
Should the mains lead of the appliance
become damaged or need replacing at any
time, it must be replaced by a special purpose
made mains lead which can only be obtained
from a Authorised Service Agent.
AWarning
This appliance must be earthed
If the fitted moulded plug is not suitable for
your socket, then the plug should be cut off
and an appropriate plug fitted.
The moulded plug on this appliance
incorporates a 13A fuse. Should the fuse
need to be replaced an ASTA approved
BS1362 fuse of the same rating must be
used. Do not forget to refit the fuse cover.
In the event of losing the fuse cover, the
plug must not be used until a replacement
fuse cover has been fitted. Colour of the
replacement fuse cover must be the same
colour as that visible on the pin face of the
plug. Fuse covers are available from any good
electrical store.
In order to avoid hazards, damaged supply
cord should be replaced by the manufacturer,
its service agent or similarly qualified people.
AImportant
Fitting a different plug
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals on your plug, proceed as follows:
1 Connect the green - yellow or green (earth)
wire to the terminal in the plug marked ‘E’
or with the symbol or coloured green and
yellow or green.
2 Connect the blue (neutral) wire to the
terminal in the plug marked ‘N’ or coloured
black.
3 Connect the brown (live) wire to the
terminal in the plug marked ‘L’ or coloured
red.
With the alternative plugs a 13A fuse must
be fitted either in the plug or adaptor or
in the main fuse box. If in doubt contact a
qualified electrician.
Green and yellow
or green
N
Blue or black L
Brown or red
8 Electrical Connection
www.beko.com