Beko WMY61283MB3 User Manual
Displayed below is the user manual for WMY61283MB3 by Beko which is a product in the Washing Machines category. This manual has pages.
Related Manuals
2820524260_EN / 08-10-15.(17:36)Document Number=
Washing Machine
User Manual
WMY 61283MB3
EN VI
This product was manufactured using the latest technology in environmentally friendly conditions.
Washing Machine / User’s Manual 3 / EN
1
General safety nstructons
This section includes security instructions which may help prevent
the injuries and material damage risks. All kinds of warranties shall
be invalid if these instructions are not observed.
1.1 Lfe and property safety
u
Never place the product on a carpet-covered floor. Electrcal parts
wll get overheated snce ar cannot crculate from under the devce.
Ths wll cause problems wth your product.
u
Unplug the product f t s not n use.
u
Always have the nstallaton and reparng procedures carred out
by the Authorzed Servce Agent. Manufacturer shall not be held
lable for damages that may arse from procedures carred out by
unauthorzed persons.
u
The water supply and dranng hoses must be securely fastened and
reman undamaged. Otherwse, water leak may occur.
u
Whle there s stll water nsde the product, never open the loadng
door or remove the flter. Otherwse, rsk of floodng and njury from
hot water wll occur.
u
Do not force open the locked loadng door. Door can be opened a few
mnutes after the washng cycle ends. In case of forcng the loadng
door to open, the door and the lock mechansm may get damaged.
u
Use detergents, softeners and supplements sutable for automatc
washng machnes only.
u
Follow the nstructons on the label of textles and the detergent
package.
1.2 Chldren's safety
u
Ths product can be used by the chldren who are at the age of 8 and
over and the people whose physcal, sensory or mental sklls are not
fully developed or who do not have necessary requred experence
and knowledge as long as they are supervsed or traned about the
safe use of the product and ts rsks. Chldren should not play wth the
devce. Cleanng and mantenance works should not be performed
by chldren unless they are supervsed by someone.
u
Packagng materals may be dangerous for the chldren. Keep
packagng materals n a safe place away from reach of the chldren.
4 / EN Washing Machine / User’s Manual
u
Electrcal products are dangerous for the chldren. Keep the chldren
away from the product when t s n use. Do not allow them to play
wth the product. Use chld lock to prevent chldren from ntervenng
wth the product.
u
Do not forget to close the loadng door when leavng the room where
the product s located.
u
store all detergents and addtves n a safe place away from the
reach of the chldren by closng the cover of the detergent contaner
or sealng the detergent package.
1.3 Electrcal safety
u
If the product has a falure, t should not be operated unless t s
repared by the Authorzed Servce Agent. Rsk of electrc shock!
u
Ths product s desgned to resume operatng n the event of
powerng on after a power nterrupton. If you wsh to cancel the
programme, see "Cancellng the programme" secton.
u
Plug the product nto a grounded outlet protected by a 16 A fuse. Do
not neglect to have the groundng nstallaton made by a qualfed
electrcan. Our company shall not be lable for any damages that
wll arse when the product s used wthout groundng n accordance
wth the local regulatons.
u
Do not wash the product by sprayng or pourng water onto t! Rsk of
electrc shock!
u
Never touch the power cable plug wth wet hands! Do not grab the
power cord to unplug the machne, always unplug t by holdng the
socket wth one hand, and pullng the plug wth the other hand.
u
Product should be unplugged durng nstallaton, mantenance,
cleanng and repar procedures.
u
If the power cable s damaged, t must be replaced by the
manufacturer, after sales servce or a smlarly qualfed person
(preferably an electrcan) or someone desgnated by the mporter n
order to avod possble rsks.
1.4 Hot surface safety
While washing the laundry at high
temperatures, the loading door glass
will get hot. Considering this fact, during
washing operation keep the children away
from the loading door of the product to
prevent them touching it.
Washing Machine / User’s Manual 5 / EN
2
Important instructions for environment
2.1 Compliance with WEEE Directive
This product complies with EU WEEE Directive (2012/19/EU). This product bears a
classification symbol for waste electrical and electronic equipment (WEEE).
This product has been manufactured with high quality parts and materials which
can be reused and are suitable for recycling. Do not dispose of the waste product
with normal domestic and other wastes at the end of its service life. Take it to the
collection center for the recycling of electrical and electronic equipment. Please
consult your local authorities to learn about these collection centers.
Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not
contain harmful and prohibited materials specified in the Directive.
2.2 Package information
Packaging materials of the product are manufactured from recyclable materials in accordance
with our National Environment Regulations. Do not dispose of the packaging materials together
with the domestic or other wastes. Take them to the packaging material collection points
designated by the local authorities.
3
Intended use
purposes or it should not be used out of its intended use.
marked accordingly.
transportation.
parts will be available to operate the appliance properly.
6 / EN Washing Machine / User’s Manual
4
Technical specifications
Complying Commission Delegated Regulation (EU) No 1061/2010
Supplier name or trademark BEKO
Model name WMY61283MB3
Rated capacity (kg) 6
Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) A++
Annual Energy Consumption (kWh) (1) 155
Energy consumption of the standard 60°C cotton programme at full load (kWh) 0.820
Energy consumption of the standard 60°C cotton programme at partial load (kWh) 0.622
Energy consumption of the standard 40°C cotton programme at partial load (kWh) 0.555
Power consumption in ‘off-mode’ (W) 0.500
Power consumption in ‘left-on mode’ (W) 0.500
Annual Water Consumption (l) (2) 8360
Spin-drying efficiency class / Scale from A (Highest Efficiency) to G (Lowest Efficiency) B
Maximum spin speed (rpm) 1200
Remaining moisture Content (%) 53
Standard cotton programme (3) Cotton Eco 60°C and 40°C
Programme time of the standard 60°C cotton programme at full load (min) 200
Programme time of the standard 60°C cotton programme at partial load (min) 180
Programme time of the standard 40°C cotton programme at partial load (min) 180
Duration of the left-on mode (min) N/A
Airborne acoustical noise emissions washing/spinning (dB) 53/74
Built-in No
Height (cm) 84
Width (cm) 60
Depth (cm) 45
Net weight (±4 kg.) 59
Single Water inlet / Double Water inlet • / -
• Available
Electrical input (V/Hz) 230 V / 50Hz
Total current (A) 10
Total power (W) 2200
Main model code 109
(1) Energy Consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load, and the
consumption of the low-power modes. Actual energy consumption will depend on how the appliance is used.
(2) Water consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load. Actual water
consumption will depend on how the appliance is used.
(3) “Standard 60°C cotton programme” and the “standard 40°C cotton programme” are the standard washing programmes to which the information
in the label and the fiche relates and these programmes are suitable to clean normally soiled cotton laundry and that they are the most efficient
programmes in terms of combined energy and water consumption.
Technical specifications may be changed without prior notice to improve the quality of the product.
Washing Machine / User’s Manual 7 / EN
4.1 Installation
installation is under customer's responsibility.
pinched or crushed while pushing the product into its place after installation or cleaning
procedures.
authorized service. Manufacturer shall not be held liable for damages that may arise from
procedures carried out by unauthorized persons.
Damaged products cause risks for your safety.
4.1.1 Approprate nstallaton locaton
similar surfaces.
load carrying capacity!
4.1.2 Removng packagng renforcement
Tilt the machine backwards to remove the packaging
reinforcement. Remove the packaging reinforcement by pulling the
ribbon. Do not make this operation alone by yourself.
4.1.3 Removng the transportaton locks
(C).
2 Remove the transport safety bolts by turning them slightly.
3 Insert the plastic covers in the bag containing the user manual to the openings on the rear
panel. (P)
A
CAUTION: Remove the transportation safety bolts before operating the washing machine! Otherwise, the
product will be damaged.
C
Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again
in the future.
Install the transport safety bolts in reverse order of the disassembly procedure.
Never move the product without the transportation safety bolts properly fixed in place!
8 / EN Washing Machine / User’s Manual
4.1.4 Connectng water supply
C
pressure reducing valve if water pressure is higher.
If you are going to use the double water-inlet product as a single (cold) water-inlet unit, you must install the
supplied stopper to the hot water valve before operating the product. (Applies for the products supplied with a
blind stopper group.)
A
CAUTION: Models with a single water inlet should not be connected to the hot water tap. In such a case the
laundry will get damaged or the product will switch to protection mode and will not operate.
CAUTION: Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry.
Connect the special water supply hoses supplied with the product to the water
Make sure that the hot and cold water taps are connected correctly when the
product is being installed. Otherwise, your laundry will come out hot at the end of
the washing process and wear out.
1 Tighten the nuts of the hose by hand. Never use a tool when
tightening the nuts.
2 When hose connection is completed, check whether there is
leak problems at the connection points by opening the taps
fully. If any leaks occur, turn off the tap and remove the nut.
Retighten the nut carefully after checking the seal. In order to
prevent the water leaks and resultant damages, keep the taps
closed when you do not use the product.
4.1.5 Connectng the dran hose to the dran
A
CAUTION: Your drain house will be flooded if the hose comes out of its housing during water discharge.
Moreover, there is risk of scalding due to high washing temperatures! In order to prevent such situations and
make sure that the machine performs water intake and discharge processes without any problem, fix the drain
hose securely.
100cm
40cm
cm and a maximum height of 100 cm.
the floor level or close to the ground (less than 40 cm
above the ground), water discharge becomes more
difficult and the laundry may come out excessively
wet. Therefore, follow the heights described in the
figure.
immerse the end of the hose into the waste water or do not insert it into the drain for more than
15 cm. If it is too long, cut it short.
pinched between the drain and the machine.
hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the
extension hose and the drain hose of the product must be fitted well with an appropriate clamp as
not to come off and leak.
Washing Machine / User’s Manual 9 / EN
4.1.6 Adjustng the feet
A
CAUTION: In order to ensure that the product operates more silently and vibration-free, it must stand level
and balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its
place and cause crushing and vibration problems.
CAUTION: Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.
2 Adjust the feet until the product stands in a stable and balanced way.
3. Tighten all lock nuts by hand again.
4.1.7 Electrcal connecton
Connect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be liable
for any damages that will arise when the product is used without grounding in accordance with the
local regulations.
electrician install a 16 Amp fuse.
voltage.
B
CAUTION: Damaged power cables must be replaced by the Authorized Service Agents.
4.1.8 Intal use
Before starting to use the product make sure that the preparations
are made which are in line with the “Important Safety and
Environment Instructions” and the instructions in the “Installation”
section.
To prepare the product for washing laundry, perform first operation
in Drum Cleaning programme. If this program is not available in your
machine, apply the method which is described in the section 4.4.2.
C
Use an anti-limescale suitable for the washing machines.
Some water might have remained in the product due to the quality control processes in the production. It is not
harmful for the product.
10 / EN Washing Machine / User’s Manual
4.2 Preparation
4.2.1 Sortng the laundry
* Sort laundry according to type of fabric, color, and degree of soiling and allowable water
temperature.
* Always obey the instructions given on the garment tags.
4.2.2 Preparng laundry for washng
will damage the machine. Remove the metal pieces or wash the clothes by putting them in a
laundry bag or pillow case.
out and brush. Such objects may damage the product or cause noise problem.
programme.
them separately.
Always follow the instructions on the package.
reduce pilling.
be shaken off before placing into the machine. Such dusts and powders on the laundry may build
up on the inner parts of the machine in time and can cause damage.
4.2.3 Thngs to be done for energy savng
Following information will help you use the product in an ecological and energy-efficient manner.
not overload; see, "Programme and consumption table". See, “Programme and consumption table"
washing process.
4.2.4 Loadng the laundry
1. Open the laundry cover.
2. Put the laundry items into the machine in a loose manner.
3. Push and close the loading cover until you hear the locking sound. Ensure that no items are caught
in the door. The loading door is locked while a programme is running. The door can only be opened
a while after the programme comes to an end.
4.2.5 Correct load capacty
The maximum load capacity depends on the type of laundry, the degree of soiling and the washing
programme desired.
Machine automatically adjusts the water amount according to the weight of the laundry put inside it.
A
WARNING: Follow the information in the “Programme and consumption table”. When overloaded, machine's
washing performance will drop. Moreover, noise and vibration problems may occur.
Washing Machine / User’s Manual 11 / EN
4.2.6 Usng detergent and softener
C
When using detergent, softener, starch, fabric dye, bleacher and decolorant, descaling agents; read the
manufacturer's instructions written on the package and follow the dosages specified. Use measuring cup if
available.
1
3
2
The detergent drawer is composed of three compartments:
) in addition, there is a siphon piece in the softener
compartment.
Detergent, softener and other cleaning agents
compartment (compartment nr. "1").
(compartment nr. "1").
the detergent bag or the dispensing ball directly among the laundry in the machine.
If you are using liquid detergent, do not forget to place the liquid detergent container into the main
wash compartment (compartment number “2”).
Choosing the detergent type
Detergent type to be used depends on the fabric type and color.
used solely for delicate clothes.
A
CAUTION: Use only detergents manufactured specifically for washing machines.
CAUTION: Do not use soap powder.
Adjusting detergent amount
The amount of washing detergent to be used depends on the amount of laundry, the degree of
soiling and water hardness.
to avoid problems of excessive foam, poor rinsing, financial savings and finally, environmental
protection.
Using softeners
Pour the softener into the softener compartment of the detergent drawer.
12 / EN Washing Machine / User’s Manual
Using liquid detergents
If the product contains a liquid detergent cup:
compartment no “2”.
it with water before putting it into the
detergent container.
If the product does not contain a liquid detergent cup:
use the Delayed Start function, do not use liquid detergent.
Using gel and tablet detergent
detergent cup, put the gel detergent into the main wash detergent compartment during first
water intake. If your machine contains a liquid detergent cup, fill the detergent into this cup before
starting the programme.
into the drum before washing.
drum before washing.
Using starch
Do not use softener and starch together in a washing cycle.
Wipe the inside of the machine with a damp and clean cloth after using starch.
Using limescale remover
Using bleaches
Add the bleach at the beginning of the washing cycle by selecting a prewash program. Do not put
detergent in the prewash compartment. As an alternative application, select a programme with
extra rinse and add the bleaching agent while the machine is taking water from the detergent
compartment during first rinsing step.
causes skin irritation. Do not pour the bleach onto the laundry and do not use it with the colored
items.
temperature.
consistence, first put detergent in the compartment number “2” in the detergent dispenser and
wait for the machine to flush the detergent when taking in water. While the machine continues
taking in water, add decolorant in the same compartment.
Washing Machine / User’s Manual 13 / EN
4.2.7 Tps for effcent washng
Clothes
Light Colours and
Whites Colours Black/Dark
Colours
Delicates/
Woolens/
Silks
(Recommended temperature
range based on soiling level:
40-90 oC)
(Recommended temperature
range based on soiling level:
cold -40 oC)
(Recommended
temperature range
based on soiling level:
cold -40 oC)
(Recommended
temperature range
based on soiling
level: cold -30 oC)
Soiling Level
Heavily
Soiled
(difficult stains
such as grass,
coffee, fruits
and blood.)
It may be necessary to pre-
treat the stains or perform
prewash. Powder and liquid
detergents recommended
for whites can be used at
dosages recommended for
heavily soiled clothes. It is
recommended to use powder
detergents to clean clay and
soil stains and the stains that
are sensitive to bleaches.
Powder and liquid detergents
recommended for colors can be
used at dosages recommended
for heavily soiled clothes. It is
recommended to use powder
detergents to clean clay and
soil stains and the stains that
are sensitive to bleaches. Use
detergents without bleach.
suitable for colors
and dark colors can
be used at dosages
recommended for
heavily soiled clothes.
Prefer liquid
detergents
produced for
delicate clothes.
Woolen and silk
clothes must
be washed with
special woolen
detergents.
Normally
Soiled
(For example,
stains caused
by body on
collars and
cuffs)
Powder and liquid detergents
recommended for whites
can be used at dosages
recommended for normally
soiled clothes.
Powder and liquid detergents
recommended for colors can be
used at dosages recommended
for normally soiled clothes.
Detergents which do not
contain bleach should be used.
suitable for colors
and dark colors can
be used at dosages
recommended for
normally soiled
clothes.
Prefer liquid
detergents
produced for
delicate clothes.
Woolen and silk
clothes must
be washed with
special woolen
detergents.
Lightly
Soiled
(No visible
stains exist.)
Powder and liquid detergents
recommended for whites
can be used at dosages
recommended for lightly soiled
clothes.
Powder and liquid detergents
recommended for colors can be
used at dosages recommended
for lightly soiled clothes.
Detergents which do not
contain bleach should be used.
suitable for colors
and dark colors can
be used at dosages
recommended for
lightly soiled clothes.
Prefer liquid
detergents
produced for
delicate clothes.
Woolen and silk
clothes must
be washed with
special woolen
detergents.
14 / EN Washing Machine / User’s Manual
4.3 Operating the product
4.3.1 Control panel
1 - Programme selection knob
4 - Duration information display
6 - End Time Setting button
9 - On / Off button
10 - Start / Pause button
11 - Auxiliary function buttons
12 - Spin speed adjustment button
13 - Temperature adjustment button
1 2 3 4 5 6 7 8
9
1011121314
Washing Machine / User’s Manual 15 / EN
4.3.2 Programme selecton
1 Determine the programme suitable for the type, quantity and soiling level of the laundry in
accordance with the "Programme and consumption table".
1 Select the desired programme with the “Programme Selection” knob.
C
Programmes are limited with the highest spin speed appropriate for that particular type of fabric.
When selecting the program you will use, always take fabric type, color, soil degree and permitted water
temperature into consideration.
Always prefer the lowest temperature value which is fit to your laundry type. Higher temperature means higher
power consumption.
4.3.3 Programmes
Use for your cotton laundry (such as bed sheets, duvet and pillowcase sets, towels, bathrobes,
underwear, etc.). Your laundry will be washed with vigorous washing action for a longer washing
cycle.
Use to wash your synthetic clothes (shirts, blouses, synthetic/cotton blends, etc.). It washes with a
gentle action and has a shorter washing cycle compared to the Cottons programme.
For curtains and tulle, use the Synthetic 40˚C programme with prewash and anti-creasing functions
selected. As their meshed texture causes excessive foaming, wash the veils/tulle by putting little
amount of detergent into the main wash compartment. Do not put detergent in the prewash
compartment.
Use to wash your woolen clothes. Select the appropriate temperature complying with the tags of
your clothes. Use appropriate detergents for woolens.
Use to wash your normally soiled, durable cotton and linen laundry. Although it washes longer than
all other programmes, it provides high energy and water savings. Actual water temperature may
be different from the stated wash temperature. When you load the machine with less laundry (e.g.
½ capacity or less), programme time may automatically get shorter. In this case, energy and water
consumption will decrease more, providing a more economic wash. This programme is available in the
models with the remaining time indicator.
Use this programme for your laundry for which you require an anti-allergic and hygienic washing at
high temperature with intensive and long washing cycle.
Use it to wash your delicate laundry. It washes with a gentler action without any interim spins
compared to the Synthetics program. It should be used for laundry for which sensitive wash is
recommended.
Use to wash your woolen/delicate clothes that bear “not machine-washable” tags and for which
hand wash is recommended. It washes laundry with a very gentle washing action to not to damage
clothes.
Use this programme to wash your lightly soiled cotton clothes in a short time.
Use to wash your lightly soiled and unstained cotton laundry in a short time.
Use this programme to wash your dark colored laundry or colored laundry that you do not want
them get faded. Washing is performed with little mechanic action and at low temperatures. It is
recommended to use liquid detergent or woolen shampoo for dark coloured laundry.
16 / EN Washing Machine / User’s Manual
Use this programme to wash your cotton and synthetic clothes together without sorting them.
Use to wash the shirts made of cotton, synthetic and synthetic blended fabrics together.
Use this programme to wash your lightly soiled and unstained cotton laundry in a short time.
Use this programme to wash your lightly soiled and unstained cotton laundry in a short time.
Use this programme to wash your garments that are worn for a short time such as sportswear. It is
suitable to wash little amount of cotton / synthetic blended garments.
Use this programme to remove the odour on the laundry that are worn only for once and do not
contain any stains or dirt.
Use this programme, which is much more sensitive to environment and natural resources, to wash
your lightly soiled and unstained cotton laundry (max. 3.5 kg) in a short time and economically.
C
It is recommended to use liquid detergent or gel washing detergent.
Use when you want to rinse or starch separately.
Use to drain the water in the machine.
4.3.4 Temperature selecton
Whenever a new programme is selected, the recommended temperature for the selected
programme appears on the temperature indicator.
To decrease the temperature, press the Temperature Adjustment button. Temperature will decrease
gradually.
C
If the programme has not reached the heating step, you can change the temperature without switching the
machine to Pause mode.
4.3.5 Spn speed selecton
Whenever a new programme is selected, the recommended spin speed of the selected programme is
displayed on the spin speed indicator.
To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases
gradually.
Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the
display. See "Auxiliary function selection" section for explanations of these options.
C
If the programme has not reached the spinning step, you can change the speed without switching the machine to
Pause mode.
Washing Machine / User’s Manual 17 / EN
4.3.6 Programme and consumpton table
* : Automatically selected, no canceling.
*** : If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin
speed.
**** : Program will detect the type and amount of the laundry which you put into the machine and adjust the water
consumption, energy consumption and program duration automatically.
- : See the programme description for maximum load.
** “Cotton eco 40°C and Cotton eco 60°C are standard programmes.” These programmes are known as ‘40°C cotton
standard programme’ and ‘60°C cotton standard programme’ and indicated with the
symbols on the
panel.
C
The auxiliary functions in the table may vary according to the model of your machine.
Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature,
ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in
electric voltage.
You can see the washing time of the programme you have selected on the display of the machine. It is normal that small
differences may occur between the time shown on the display and the real washing time.
“Selection patterns for auxiliary functions can be changed by the manufacturer company. New selection patterns can be
added or removed.”
“The spin speed of your machine may vary according to the programme; this spin speed cannot exceed the max. spin
speed of your machine.”
"The manufacturer reserves the right to make modifications in the programmes and auxiliary functions given in the table.
While these modifications will not change the machine performance, programme steps and durations can be changed."
EN 2Auxiliary functions
Programme (°C)
Max. Load (kg)
Water Consumption (l)
Energy Consumption
(kWh)
Max. Speed***
Prewash
Quick Wash
Anti-Creasing
Extra Rinse
Rinse Hold
Pet hair removal
Selectable
temperature range
°C
Cottons Eco
60** 6 42 0.82 1600 Cold-60
60** 3 33 0.62 1600 Cold-60
40** 3 33 0.55 1600 Cold-60
Cottons
90 6 60 1.90 1600 •••••• Cold-90
60 6 60 1.20 1600 •••••• Cold-90
40 6 57 0.75 1600 •••••• Cold-90
Synthetics 60 2.5 48 0.95 1200 •••••• Cold-60
40 2.5 45 0.50 1200 •••••• Cold-60
Woollens 40 1.5 55 0.32 1200 • • Cold-40
Hand Wash 30 1 40 0.25 1200 Cold-30
BabyProtect 60 6 85 1.60 1600 * 30 - 90
Dark Care 40 2.5 55 0.50 1000 • • *• • Cold-40
Shirts 40 2.5 55 0.50 800 • • *••• Cold-60
Mix 40 40 3 55 0.60 1000 ••• •• Cold-40
Aqua 40’ 40° 40 6 40 0.40 1400 •Cold-40
GentleCare 20° 20 2.5 48 0.12 1200 ••• 20
Sports 40 2.5 56 0.55 1000 ••• •• Cold-40
Xpress Super Short 30 2 35 0.09 1400 • • Cold-30
Daily Xpress
90 6 64 1.70 1400 • • Cold-90
60 6 62 0.95 1400 • • Cold-90
30 6 60 0.15 1400 • • Cold-90
18 / EN Washing Machine / User’s Manual
Select the desired auxiliary functions before starting the programme.
Whenever a programme is selected, if a relevant auxiliary function is selected its related indicator
light will illuminate.
C
Indicator lights of the auxiliary functions that are not allowed to be selected with the current programme will
flash and an audio warning is given.
Furthermore, you may also select or cancel auxiliary functions that are suitable to the running
programme after the washing cycle starts. If the wash cycle has reached a point where no auxiliary
function can be selected, an audio warning will be given and the related auxiliary function's light will
flash.
C
Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is
selected before starting the machine, the function selected first will be canceled and the second auxiliary
function selection will remain active. For example, if you want to select Quick Wash after you have selected the
Additional Water, Additional Water will be canceled and Quick Wash will remain active.
An auxiliary function that is not compatible with the programme cannot be selected. (See, “Programme and
consumption table")
Some programmes have auxiliary functions that must be operated simultaneously. Those functions cannot be
cancelled. The frame of the auxiliary function will not be illuminated, only inner area will be illuminated.
A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy,
water, detergent and time.
This function can be used in Cottons and Synthetics programmes. It decreases the washing times
and also the number of rinsing steps for lightly soiled laundry.
C
When you select this function, load your machine with half of the maximum laundry specified in the programme
table.
This function enables the machine to make another rinsing in addition to the one already made after
the main wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected by the
minimal detergent remnants on the laundry can be reduced.
This function creases the clothes lesser when they are being washed. Drum movement is reduced
and spin speed is limited to prevent creasing. In addition, washing is done with a higher water level.
If you are not going to unload your clothes immediately after the programme completes, you can
use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from
getting wrinkled when there is no water in the machine. Press Start / Pause button after this process
if you want to drain the water without spinning your laundry. Programme will resume and complete
after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button.
The programme resumes. Water is drained, laundry is spun and the programme is completed.
Use to wash the cottons with lesser energy consumption and silently. Spin steps are cancelled for a
silent washing and the cycle ends with the Rinse Hold step. After completion of the programme, run
Spin cycle to spin the laundry.
This function helps to remove pet hair that remain on your garments more effectively.
When you select this function, Prewash and Extra Rinse steps are added to the normal programme.
Thus, washing is performed with more water (30%) and the pet hair is removed more effectively.
A
WARNING: Never wash your pets in the washing machine.
Washing Machine / User’s Manual 19 / EN
4.3.8 End Tme
With the End Time function, the startup of the programme may be delayed up to 24 hours. After
pressing End Time button, the programme's estimated ending time is displayed. If the End Time is
adjusted, End Time indicator is illuminated.
In order for the End Time function to be activated and the programme to be completed at the end of
the specified time, you must press Start / Pause button after adjusting the time.
If you want to cancel End Time function, press On / Off button to turn off and on the machine.
C
Do not use liquid detergents when you activate End Time function! There is the risk of staining of the
clothes.
1 Open the loading door, place the laundry and put detergent, etc.
2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3 Set the end time of your choice by pressing the End Time button. End Time indicator illuminates.
4 Press Start / Pause button. Time countdown starts. “:” sign in the middle of the end time on the
display starts flashing.
C
Additional laundry may be loaded during the End Time countdown period. At the end of the countdown, End Time
indicator turns off, washing cycle starts and the time of the selected programme appears on the display.
When the End Time selection is completed, the time appears on the screen consists of end time plus the duration
of the selected programme.
4.3.9 Startng the programme
1. Press Start / Pause button to start the programme.
2. Programme follow-up light showing the startup of the programme will turn on.
C
If no programme is started or no key is pressed within 1-10 minute during programme selection process, the
machine will switch to OFF mode. Display and all indicators are turned off.
Selected programme data will be displayed if you press On / Off button.
There is a locking system on the loading door of the machine that prevents opening of the door in
cases when the water level is unsuitable.
4.3.11 Changng the selectons after the programme has started
After the programme has started you can make the following changes.
4.3.11.1 Swtchng the machne to pause mode:
Press the Start/Pause button to switch the machine to pause mode while a programme is running.
The light indicating the Start/Pause status and programme step starts flashing on the Programme
Door light will also flash until the door is ready to be opened. When the loading door is ready to
continue to flash.
the programme step light.
Depending on the step the programme has reached, you can cancel or select the auxiliary functions.
See, "Auxiliary function selection".
You can also change the speed and temperature settings. See, "Spin speed selection" and
"Temperature selection".
C
If no change is allowed, the relevant light will flash for 3 times.
20 / EN Washing Machine / User’s Manual
4.3.11.3 Addng or takng out laundry
1. Press the Start / Pause button to switch the machine to pause mode. The programme follow-up
light of the relevant step during which the machine was switched into the pause mode will flash.
6. Make changes in auxiliary functions, temperature and speed settings if necessary.
7. Press Start/Pause button to start the machine.
4.3.12 Chld Lock
any changes in a running programme.
C
You can switch on and off the machine with On / Off
the machine again, programme will resume from where it has stopped.
4.3.12.1 To actvate the chld lock:
button 2 for 3 seconds. In the programme selection display on
the panel, "Child lock enabled" light will turn on. You can release when
this warning is displayed.
4.3.12.2 To deactvate the chld lock:
button 2 for 3 seconds. In the programme selection display on
the panel, "Child lock enabled" light will turn off.
4.3.13 Cancelng the programme
The programme is cancelled when the machine is turned off and on again. Press and hold On / Off
button for 3 seconds.
C
If you press On / Off
If you want to open the loading door after you have cancelled the programme but it is not possible to open
the loading door since the water level in the machine is above the loading door opening, then turn the
Programme Selection knob to programme and discharge the water in the machine.
4.3.14 End of programme
If you do not press any button for 10 minutes, the machine will switch to OFF mode. Display and all
indicators are turned off.
Completed programme steps will be displayed if you press On / Off button.
4.3.15 Your machne features "Standby Mode".
After you switch on your machine with On-Off button, if no program is started or no other procedure
is performed at the selection step or no action is taken within approx. 10 minutes after the selected
program ends, your machine will switch to OFF mode automatically. Display and all indicators are
turned off. Selected programme data will be displayed if you press On / Off button. Before you start
the program, check the accuracy of your selections. If necessary, repeat them. This is not an error.
Washing Machine / User’s Manual 21 / EN
4.4 Maintenance and cleaning
Service life of product extends and frequently experienced problems will be reduced if it is cleaned at
regular intervals.
4.4.1 Cleanng the detergent drawer
Clean the detergent drawer at regular intervals (every 4-5 washing cycles)
as shown below in order to prevent accumulation of powder detergent in
time.
If more than normal amount of water and softener mixture starts to gather
in the softener compartment, the siphon must be cleaned.
1 Press the dotted point on the siphon in the softener compartment and pull towards you until
the compartment is removed from the machine.
2. Wash the detergent drawer and the siphon with plenty of lukewarm water in a washbasin.
In order to prevent the residues to contact your skin, clean it with an appropriate brush by
wearing a pair of gloves.
3 Insert the drawer back into its place after cleaning and make sure that it is seated well.
4.4.2 Cleanng the loadng door and the drum
Residues of softener, detergent and dirt may accumulate in your machine in time and may cause
unpleasant odours and washing complaints. To avoid this, use the Drum Cleaning programme. If
your machine is not featured with Drum Cleaning programme, use programme and
select Additional Water or auxiliary functions as well. Run the programme without any
laundry in the machine. Before starting the programme, put max. 100 g of powder anti-limescale into
the main wash detergent compartment (compartment nr. "2"). If the anti-limescale is in tablet form,
put only one tablet into compartment nr. 2. Dry the inside of the bellow with a clean piece of cloth
after the programme has come to an end.
C
Repeat Drum Cleaning process in every 2 months.
Use an anti-limescale suitable for the washing machines.
After every washing make sure that no foreign substance is left in the drum.
If the holes on the bellow shown in the figure is blocked, open the holes using
a toothpick.
Foreign metal substances will cause rust stains in the drum. Clean the stains
on the drum surface by using cleaning agents for stainless steel.
Never use steel wool or wire wool. These will damage the painted, chromated
and plastic surfaces.
4.4.3 Cleanng the body and control panel
Wipe the body of the machine with soapy water or non-corrosive mild gel detergents as necessary,
and dry with a soft cloth.
Use only a soft and damp cloth to clean the control panel.
22 / EN Washing Machine / User’s Manual
4.4.4 Cleanng the water ntake flters
There is a filter at the end of each water intake valve at the rear of the machine and also at the
end of each water intake hose where they are connected to the tap. These filters prevent foreign
substances and dirt in the water to enter the washing machine. Filters should be cleaned as they do
get dirty.
1. Close the taps.
2. Remove the nuts of the water intake hoses to access
the filters on the water intake valves. Clean them
with an appropriate brush. If the filters are too dirty,
remove them from their places with a pliers and clean
in this way.
3. Take out the filters on the flat ends of the water
intake hoses together with the gaskets and clean
thoroughly under running water.
4. Replace the seals and filters carefully and tighten
their nuts by hand.
4.4.5 Dranng remanng water and cleanng the pump flter
The filter system in your machine prevents solid items such as buttons, coins and fabric fibers
clogging the pump impeller during discharge of washing water. Thus, the water will be discharged
without any problem and the service life of the pump will extend.
If the machine fails to drain water, the pump filter is clogged. Filter must be cleaned whenever it is
clogged or in every 3 months. Water must be drained off first to clean the pump filter.
In addition, prior to transporting the machine (e.g., when moving to another house) and in case of
freezing of the water, water may have to be drained completely.
A
CAUTION: Foreign substances left in the pump filter may damage your machine or may cause noise problem.
CAUTION: If the product is not being used, shut the tap shut, remove mains pipe and drain the water inside
the machine against any likely freezing.
CAUTION: After each use, turn off the water tap to which the mains hose is connected.
In order to clean the drty flter and dscharge the water:
1 Unplug the machine to cut off the supply power.
A
CAUTION:
the filter after the water inside the machine is cooled down.
2. Open the filter cover.
3 Follow the below procedures in order to drain water.
Washing Machine / User’s Manual 23 / EN
If the product has an emergency water dranng hose, n order to dran the water:
a Pull the emergency draining hose out from its
seat
b Place a large container at the end of the hose.
Drain the water into the container by pulling
out the plug at the end of the hose. When the
container is full, block the inlet of the hose
by replacing the plug. After the container is
emptied, repeat the above procedure to drain
the water in the machine completely.
c When draining of water is finished, close the
end by the plug again and fix the hose in its
place.
d Turn and remove the pump filter.
If the product does not have an emergency water dran hose, n order to dran the water:
a. In order to collect the water to flow out of the
filter, place a large vessel in front of the filter.
b. Turn and loosen the pump filter until water
starts to flow (counterclockwise). Fill the
flowing water into the container you have
placed in front of the filter. Always keep a piece
of cloth handy to absorb any spilled water.
c When the water inside the machine is finished,
take out the filter completely by turning it.
4 Clean any residues inside the filter as well as fibers, if any, around the pump impeller region.
5. Replace the filter.
6. If the filter cap is composed of two pieces, close the filter cap by pressing on the tab. If it is one
piece, seat the tabs in the lower part into their places first, and then press the upper part to close.
24 / EN Washing Machine / User’s Manual
5
Troubleshooting
Problem Reason Soluton
Programme cannot be started or
selected.
Washing machine has switched to self protection
mode due to a supply problem (line voltage, water
pressure, etc.).
Press and hold On / Off button for 3 seconds.
(see. "Cancellaton of program")
Water in the machine.
Some water might have remained in the product
due to the quality control processes in the
production.
Ths s not a falure; water s not harmful to
the machne.
Machine does not fill with water.
Tap is turned off. Turn on the taps.
Water inlet hose is bent. Flatten the hose.
Water inlet filter is clogged. Clean the flter.
Loading door may be open. Close the door.
Machine does not drain water.
Water drain hose might be clogged or twisted. Clean or flatten the hose.
Pump filter is clogged. Clean the pump flter.
Machine vibrates or makes noise.
Machine might be standing unbalanced. Adjust the feet to level the machne.
A hard substance might have entered into the
pump filter.
Clean the pump flter.
Transportation safety bolts are not removed. Remove the transportaton safety bolts.
Laundry quantity in the machine might be too
little.
Add more laundry to the machne.
Machine might be overloaded with laundry. Take out some of the laundry from the
machne or dstrbute the load by hand to
balance t homogenously n the machne.
Machine might be leaning on a rigid item. Make sure that the machne s not leanng
on anythng.
There is water leaking from the
bottom of the washing machine.
Water drain hose might be clogged or twisted. Clean or flatten the hose.
Pump filter is clogged. Clean the pump flter.
Machine stopped shortly after
the programme started.
Machine might have stopped temporarily due to
low voltage.
It wll resume runnng when the voltage
restores to the normal level.
Machine directly discharges the
water it takes in.
Draining hose might not be at adequate height. Connect the water dranng hose as
descrbed n the operaton manual.
No water can be seen in the
machine during washing.
The water level is not visible from outside of the
washing machine.
Ths s not a falure.
Loading door cannot be opened.
Door lock is activated because of the water level
in the machine.
Dran the water by runnng the Pump or Spn
programme.
Machine is heating up the water or it is at the
spinning cycle.
Wat untl the programme completes.
Child lock is engaged. Door lock will be deactivated
a couple of minutes after the programme has
come to an end.
Wat for a couple of mnutes for deactvaton
of the door lock.
Washing takes longer time than
specified in the manual.(*)
Water pressure is low. Machne wats untl takng n adequate
amount of water to prevent poor washng
qualty due to the decreased amount of
water. Therefore, the washng tme extends.
Voltage might be low. Washng tme s prolonged to avod poor
washng results when the supply voltage
s low.
Input temperature of water might be low. Requred tme to heat up the water extends
n cold seasons. Also, washng tme can be
lengthened to avod poor washng results.
Number of rinses and/or amount of rinse water
might have increased.
Machne ncreases the amount of rnse water
when good rnsng s needed and adds an
extra rnsng step f necessary.
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent usage.
Use recommended amount of detergent.
Washing Machine / User’s Manual 25 / EN
Problem Reason Soluton
Programme time does not
countdown. (On models with
display) (*)
Timer may stop during water intake. Tmer ndcator wll not countdown untl the
machne takes n adequate amount of water.
The machne wll wat untl there s suffcent
amount of water to avod poor washng
results due to lack of water. Tmer ndcator
wll resume countdown after ths.
Timer may stop during heating step. Tmer ndcator wll not countdown untl the
machne reaches the selected temperature.
Timer may stop during spinning step. Automatc unbalanced load detecton system
mght be actvated due to the unbalanced
dstrbuton of the laundry n the drum.
Programme time does not
countdown. (*)
There might be unbalanced load in the machine. Automatc unbalanced load detecton system
mght be actvated due to the unbalanced
dstrbuton of the laundry n the drum.
Machine does not switch to
spinning step. (*)
There might be unbalanced load in the machine. Automatc unbalanced load detecton system
mght be actvated due to the unbalanced
dstrbuton of the laundry n the drum.
The machine will not spin if water is not drained
completely.
Check the flter and the dranng hose.
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent usage.
Use recommended amount of detergent.
Washing performance is poor:
Laundry turns gray. (**)
Insufficient amount of detergent has been used
over a long period of time.
Use the recommended amount of detergent
approprate for water hardness and the
laundry.
Washing was made at low temperatures for a
long time.
Select the proper temperature for the
laundry to be washed.
Insufficient amount of detergent is used with
hard water.
Usng nsuffcent amount of detergent wth
hard water causes the sol to stck on the
cloth and ths turns the cloth nto gray n
tme. It s dffcult to elmnate grayng once
t happens. Use the recommended amount
of detergent approprate for water hardness
and the laundry.
Too much detergent is used. Use the recommended amount of detergent
approprate for water hardness and the
laundry.
Washing performance is poor:
Stains persist or the laundry is
not whitened. (**)
Insufficient amount of detergent is used. Use the recommended amount of detergent
approprate for water hardness and the
laundry.
Excessive laundry was loaded in.
amounts recommended n the "Programme
and consumpton table".
Wrong programme and temperature were
selected.
Select the proper programme and
temperature for the laundry to be washed.
Wrong type of detergent is used. Use orgnal detergent approprate for the
machne.
Too much detergent is used. Put the detergent n the correct
compartment. Do not mx the bleachng
agent and the detergent wth each other.
Washing performance is poor:
Oily stains appeared on the
laundry. (**)
Regular drum cleaning is not applied. Clean the drum regularly. For ths, please
see 4.4.2.
Washing performance is poor:
Clothes smell unpleasantly. (**)
Odours and bacteria layers are formed on the
drum as a result of continuous washing at lower
temperatures and/or in short programmes.
the loadng door of the machne ajar after
each washng. Thus, a humd envronment
favorable for bactera cannot occur n the
machne.
Colour of the clothes faded. (**)
Excessive laundry was loaded in. Do not load the machne n excess.
Detergent in use is damp. Keep detergents closed n an envronment
free of humdty and do not expose them to
excessve temperatures.
A higher temperature is selected. Select the proper programme and
temperature accordng to the type and
solng degree of the laundry.
26 / EN Washing Machine / User’s Manual
Problem Reason Soluton
It does not rinse well.
The amount, brand and storage conditions of the
detergent used are inappropriate.
Use a detergent approprate for the washng
machne and your laundry. Keep detergents
closed n an envronment free of humdty
and do not expose them to excessve
temperatures.
Detergent is put in the wrong compartment. If detergent s put n the prewash
compartment although prewash cycle s not
selected, machne can take ths detergent
durng rnsng or softener step. Put the
detergent n the correct compartment.
Pump filter is clogged. Check the flter.
Drain hose is folded. Check the dran hose.
Laundry became stiff after
washing. (**)
Insufficient amount of detergent is used. Usng nsuffcent amount of detergent for
the water hardness can cause the laundry
to become stff n tme. Use approprate
amount of detergent accordng to the water
hardness.
Detergent is put in the wrong compartment. If detergent s put n the prewash
compartment although prewash cycle s not
selected, machne can take ths detergent
durng rnsng or softener step. Put the
detergent n the correct compartment.
Detergent might be mixed with the softener. Do not mx the softener wth detergent.
Wash and clean the dspenser wth hot water.
Laundry does not smell like the
softener. (**)
Detergent is put in the wrong compartment. If detergent s put n the prewash
compartment although prewash cycle s not
selected, machne can take ths detergent
durng rnsng or softener step. Wash and
clean the dspenser wth hot water. Put the
detergent n the correct compartment.
Detergent might be mixed with the softener. Do not mx the softener wth detergent.
Wash and clean the dspenser wth hot water.
Detergent residue in the
detergent drawer. (**)
Detergent is put in wet drawer. Dry the detergent drawer before puttng n
detergent.
Detergent has gotten damp. Keep detergents closed n an envronment
free of humdty and do not expose them to
excessve temperatures.
Water pressure is low. Check the water pressure.
The detergent in the main wash compartment got
wet while taking in the prewash water. Holes of
the detergent compartment are blocked.
Check the holes and clean f they are clogged.
There is a problem with the detergent drawer
valves.
Call the Authorzed Servce Agent.
Detergent might be mixed with the softener. Do not mx the softener wth detergent.
Wash and clean the dspenser wth hot water.
Regular drum cleaning is not applied. Clean the drum regularly. For ths, please
see 4.4.2.
Washing Machine / User’s Manual 27 / EN
Problem Reason Soluton
Too much foam forms in the
machine. (**)
Improper detergents for the washing machine are
being used.
Use detergents approprate for the washng
machne.
Excessive amount of detergent is used. Use only suffcent amount of detergent.
Detergent was stored under improper conditions. Store detergent n a closed and dry locaton.
Do not store n excessvely hot places.
Some meshed laundry such as tulle may foam too
much because of their texture.
Use smaller amounts of detergent for ths
type of tem.
Detergent is put in the wrong compartment. Put the detergent n the correct
compartment.
Softener is being taken early. There may be problem n the valves or n the
detergent dspenser. Call the Authorzed
Servce Agent.
Foam is overflowing from the
detergent drawer.
Too much detergent is used. Mx 1 tablespoonful softener and ½ l water
and pour nto the man wash compartment of
the detergent drawer.
Put detergent nto the machne sutable
for the programmes and maxmum
loads ndcated n the “Programme and
consumpton table”. When you use addtonal
chemcals (stan removers, bleachs and etc),
reduce the amount of detergent.
Laundry remains wet at the end
of the programme. (*)
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent usage.
Use recommended amount of detergent.
(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the
machine and to its surrounding environment. Laundry should be rearranged and re-spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.4.2
A
CAUTION: If you cannot eliminate the problem although you follow the instructions in this section, consult your
dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.
2820524260_VI / 08-10-15.(17:43)Document Number=
රෙදි සෝදන යන්ත්රය
WMY 61283MB3
SI
29 / SI
1
u
u
u
u
u
u
u
u
30 / SI
u
u
u
u
u
u
u
u
u
u
u
31 / SI
u
32 / SI
2
3
33 / SI
4
BEKO
WMY61283MB3
(kg) 6
(1) 155
0.820
0.622
0.555
0.500
0.500
(2) 8360
B
1200
53
(3) 40°C
200
180
180
53/74
Non
84
60
45
59
10
2200
109
(1)
(2)
(3)
34 / SI
(C)
.
(P)
A
C
35 / SI
C
A
A
100cm
40cm
36 / SI
A
B
C
37 / SI
A
38 / SI
C
1
3
2
A
39 / SI
40 / SI
-40 oC)
-40 oC)
41 / SI
1 2 3 4 5 6 7 8
9
1011121314
42 / SI
C
M1444.”
43 / SI
C
C
C
44 / SI
C
SI 42
°C
60** 6 42 0.82 1600
60** 3 33 0.62 1600
40** 3 33 0.55 1600
90 6 60 1.90 1600
60 6 60 1.20 1600
40 6 57 0.75 1600
60 2.5 48 0.95 1200
40 2.5 45 0.50 1200
40 1.5 55 0.32 1200
30 1 40 0.25 1200
60 6 85 1.60 1600 * 30 - 90
40 2.5 55 0.50 1000 *
40 2.5 55 0.50 800 *
40 3 55 0.60 1000
40 6 40 0.40 1400
20 2.5 48 0.12 1200 20
40 2.5 56 0.55 1000
30 2 35 0.09 1400
90 6 64 1.70 1400
60 6 62 0.95 1400
30 6 60 0.15 1400
45 / SI
C
C
C
C
46 / SI
C
C
C
47 / SI
C
C
48 / SI
C
49 / SI
A
A
50 / SI
51 / SI
5
52 / SI
4.4.2.
53 / SI
4.4.2.
54 / SI
4.4.2
A
55 / SI
www.beko.com