Beko WTV8744XDW User Manual
Displayed below is the user manual for WTV8744XDW by Beko which is a product in the Washing Machines category. This manual has pages.
Related Manuals
2820526322_EN/ 22-11-17.(15:33)
Washing Machine
User Manual
WTV 8744 XDW
EN
Document Number=
Dear Customer,
Please read ths user manual frst!
Thank you for preferrng a Beko product. We hope that you get the best results from our
product whch has been manufactured wth hgh qualty and state-of-the-art technology.
Therefore, please read ths entre user manual and all other accompanyng documents
carefully before usng the product and keep t as a reference for future use.
If you handover the product to someone else, gve the user manual as well.
Follow all warnngs and nformaton n the user manual.
You can see the user's manual at www.beko.com.
Explanaton of symbols
DANGER!
• A hazard wth a hgh level of rsk whch, f not avoded, wll result n
death or serous njury.
WARNING!
• A hazard wth a medum level of rsk whch, f not avoded, wll result
n death or serous njury.
CAUTION!
• A hazard wth a low level of rsk whch, f not avoded, wll result n
small or medum njury.
NOTE
Useful nformaton or hnts about usage.
This product was manufactured using the latest technology in environmentally friendly conditions.
EN / 3
Washing Machine / User’s Manual
CONTENTS
1. General safety nstructons 5
1.1 Chldren's safety ...........................................................................................................................5
1.2 Product safety ............................................................................................................................. 6
1.3 Electrcal safety............................................................................................................................ 6
1.4 Hot surface safety .......................................................................................................................7
1.5 Other .................................................................................................................................................7
2. Instructons for envronmental protecton 8
2.1 Complance wth WEEE Drectve ......................................................................................... 8
2.2 Dsposng of the waste product ........................................................................................... 8
2.3 Package nformaton ................................................................................................................. 8
2.4 What you can do for energy savng .................................................................................... 9
3 Intended use 10
4. Your product 11
4.1 Overvew........................................................................................................................................11
4.2 Package contents ..................................................................................................................... 12
4.3 Control panel .............................................................................................................................. 13
4.4 Screenshot .................................................................................................................................14
5.Techncal specfcatons 15
6. Installaton 16
6.1 Approprate nstallaton locaton .......................................................................................16
6.2 Removng packagng renforcement ................................................................................ 17
6.3 Removng transportaton safety bolts ............................................................................18
6.4 Connectng water supply ......................................................................................................19
6.5 Connectng the water dranng hose to the dran ......................................................20
6.6 Adjustng the feet .................................................................................................................... 21
6.7 Electrcal connecton ............................................................................................................... 22
6.8 Electrcal requrements ........................................................................................................23
6.9 Fttng a dfferent plug.......................................................................................................... 24
6.10 Transportaton of the product ........................................................................................ 24
7. Intal use 25
7.1 Drum cleanng ............................................................................................................................. 25
8. Preparng to wash 26
8.1 Sortng the laundry ..................................................................................................................26
8.2 Preparng laundry for washng ........................................................................................... 27
8.3 Loadng and removng the laundry ................................................................................... 27
8.4 Usng detergent and softener ........................................................................................... 28
8.4.1 Detergent drawer ................................................................................................................................28
8.4.2 Detergent, softener and other cleaning agents ....................................................................28
8.4.3 Auto dosing ............................................................................................................................................29
8.4.4 Dose selection and cancellation or powder detergent use ................................................31
This product was manufactured using the latest technology in environmentally friendly conditions.
EN / 4
Washing Machine / User’s Manual
8.4.5 When the detergent and/or softener run(s) out: .................................................................. 32
8.4.6 Adding detergent or softener to the wrong compartment: .............................................. 32
8.4.7 Choosing the detergent .................................................................................................................... 32
8.4.8 Adjusting detergent amount .......................................................................................................... 33
8.4.9 Using tablet and capsule liquid detergents .............................................................................. 33
8.4.10 Using starch......................................................................................................................................... 33
8.4.11 Using limescale remover ................................................................................................................. 33
8.4.12 Using bleaches ................................................................................................................................... 33
9. Programmes and Auxlary Functons 34
9.1 Programme selecton ............................................................................................................. 34
9.2 Programmes ...............................................................................................................................35
9.3 Programme table ..................................................................................................................... 40
9.4 Auxlary functon selecton ................................................................................................ 42
9.4.1 Auxiliary functions ..............................................................................................................................43
9.4.2 "Functions/Programmes Selected by Pressing the Function Buttons for 3
Seconds" ...................................................................................................................................................44
10. Programme settng 47
10.1 Temperature selecton ........................................................................................................47
10.2 Spn speed selecton .............................................................................................................47
10.3 Quck Wash Settng (Express) .......................................................................................... 48
10.4 Startng the programme .................................................................................................... 49
10.5 Programme steps .................................................................................................................. 49
10.6 End of programme .................................................................................................................50
11. Programme optons 51
11.1 Settng the end tme .............................................................................................................. 51
11.1.1 Cancelling the end time setting .................................................................................................... 52
11.2 Swtchng the machne to standby mode and addng laundry ............................ 52
11.3 Cancellng the programme ..................................................................................................53
12. Addtonal features 54
12.1 Actvatng and deactvatng the audo warnng ........................................................54
12.2 Loadng door lock ...................................................................................................................54
12.2.1 Opening the loading door in case of power failure: ............................................................. 55
13. Mantenance and cleanng 56
13.1 Cleanng the detergent drawer ........................................................................................56
13.1.1 When to clean ......................................................................................................................................56
13.1.2. Cleaning:.................................................................................................................................................57
13.2 Cleanng the loadng door .................................................................................................. 58
13.3 Cleanng the body and control panel ............................................................................ 58
13.4 Cleanng the water ntake flters .....................................................................................59
13.5 Cleanng the pump flter ......................................................................................................59
13.5.1 Cleaning dirty filters ..........................................................................................................................60
14. Troubleshootng 61
EN / 5
Washing Machine / User’s Manual
1. General safety nstructons
1.1 Chldren's safety
• Chldren under the age of 3 should be kept
away unless contnuously supervsed.
• Ths product can be used by chldren at and
above 8 years old and by persons whose
physcal, sensory or mental capabltes were
not fully developed or who lack experence and
knowledge provded that they are supervsed
or traned on the safe usage of the product and
the rsks t brngs out.
• Chldren under the age of 8 should be prevented
from accessng and tnkerng wth the product.
• Cleanng and user mantenance works should
not be performed by chldren unless they are
supervsed by someone.
• Electrcal products are dangerous for the
chldren.
• Use chld lock to prevent chldren from
ntervenng wth the product.
• Do not forget to close the loadng door when
leavng the room where the product s located.
• Packagng materals are dangerous to chldren.
WARNING!
EN / 6
Washing Machine / User’s Manual
1.2 Product safety
• Unplug the product when not n use.
• Always have the nstallaton and reparng
procedures carred out by the Authorsed
Servce Agent.
• Do not force open the locked loadng door. The
door wll open mmedately after the washng
cycle has ended. If the door does not open,
apply the solutons provded for "Loadng door
cannot be opened." error n the Troubleshootng
secton. In case of forcng the loadng door to
open, the door and the lock mechansm may
get damaged.
• Never open the loadng door or remove the
flter whle there s stll water n the drum.
Otherwse, rsk of floodng and njury from hot
water wll occur.
• The water supply and dranng hoses must be
securely fastened and reman undamaged.
WARNING!
DANGER!
1.3 Electrcal safety
• Do not operate faulty products untl repared
by an Authorsed Servce Agent.
• Do not try to reach nteror parts of the product
other than the parts stated n mantenance
nstructons.
• Never wash the product by spreadng or
pourng water onto t!
• Never touch the power cable plug wth wet
hands!
EN / 7
Washing Machine / User’s Manual
1.4 Hot surface safety
• The glass of the loadng door gets too hot whle
washng at hgh temperatures. Therefore,
especally do not allow chldren touch the glass
whle washng.
1.5 Other
• Do not use combustble, flammable and other
smlar chemcals for product cleanng or other
purposes.
• Do not step or stand on the product.
• Do not place heavy objects on the product.
• If you wll place a dryer on to the washng
machne, secure t wth the sutable connecton
apparatus that you can obtan from the
Authorsed Servce Agent.
• Unplug the product, turn the tap off and
contact your Authorsed Servce Agent wthout
tamperng wth the product f the product has
been damaged.
• Keep your pets away from the washng
machne.
WARNING!
EN / 8
Washing Machine / User’s Manual
2. Instructons for envronmental protecton
2.1 Complance wth WEEE Drectve
Ths product does not contan harmful and forbdden materals descrbed
n the "Regulaton on the Control of the Waste Electrcal and Electronc
Equpment" ssued by T.R. Mnstry of Envronment and Urbanzaton. It
comples wth the WEEE Drectve.
2.2 Dsposng of the waste product
Ths product has been manufactured wth hgh qualty parts and materals
whch can be reused and are sutable for recyclng. Therefore, do not
dspose the product wth normal domestc waste at the end of ts servce
lfe.
Take t to a collecton pont for the recyclng of electrcal and electronc
equpment. Please consult your local authortes to learn the nearest
collecton pont. Help protect the envronment and natural resources by
recyclng used products.
For chldren's safety, cut the power cable and break the lockng mechansm
of the loadng door so that t wll be non-functonal before dsposng of the
product.
Complance wth RoHS Drectve:
The product you have purchased comples wth EU RoHS Drectve
(2011/65/EU). It does not contan harmful and prohbted materals
specfed n the Drectve.
2.3 Package nformaton
Packagng materals of the product are manufactured from recyclable
materals n accordance wth our Natonal Envronment Regulatons. Do not
dspose of the packagng materals together wth the domestc or other
wastes. Take them to the packagng materal collecton ponts desgnated
by the local authortes.
EN / 9
Washing Machine / User’s Manual
2.4 What you can do for energy savng
CAUTION!
• Comply wth the nformaton n the programme and
consumpton table secton.
- If the washng machne s overloaded, ts washng
performance wll drop.
- Moreover, nose and vbraton problems may occur.
Followng nformaton wll help you use the product n an ecologcal and
energy-effcent manner.
a) Operate the product n the hghest load capacty allowed for
the programme you have selected, but do not overload. See,
“Programme and consumpton table”.
b) Follow the recommended temperatures n the programme and
consumpton table.
c) Wash slghtly soled laundry at low temperatures.
d) Select faster programmes for small quanttes of lghtly soled
laundry.
e) Do not use prewash and hgh temperatures for laundry that s not
heavly soled or staned.
f) If you plan to dry your laundry n a dryer, select the hghest spn
speed recommended durng washng process.
g) Do not use detergent n excess of the amount recommended on the
detergent package.
EN / 10
Washing Machine / User’s Manual
3 Intended use
a) Ths product has been desgned for domestc use.
b) It s not sutable for commercal use and t must not be used for
anythng other than ts ntended use.
c) Sutable for textle washable n washng machnes.
d) The manufacturer waves any responsblty arsen from ncorrect
usage or transportaton.
e) The servce lfe of your product s 10 years. Durng ths perod,
orgnal spare parts wll be avalable to operate the product properly.
f) Do not wash the tems such as carpets, rugs and etc. n the machne.
Permanent damage occurs n the machne.
EN / 11
Washing Machine / User’s Manual
4. Your product
4.1 Overvew
1
2
3
4
5
6
7
8
1- Power cable
2- Upper table
3- Control panel
4- Water dscharge hose
5- Loadng door
6- Flter cap
7- Adjustable feet
8- Detergent drawer
EN / 12
Washing Machine / User’s Manual
4.2 Package contents
Power cable
Water dscharge hose
Transportaton safety bolts
Mans water nlet hose
User manual
Plastc plug assembly
NOTE
• Fgures n ths manual are schematc and may not match
the product exactly.
EN / 13
Washing Machine / User’s Manual
4.3 Control panel
1 - Programme selecton knob
2 - Spn level adjustment button
3 - Temperature level adjustment button
4 - Dsplay
5 - End Tme adjustment button
6 - Quck Wash settng button
7 - On/Off button
8 - Start/Pause button
9 - Auxlary functon button 3
10 - Auxlary functon button 2
11 - Auxlary functon button 1
12 - Programme selecton lghts
WTV 8744 XDW
Cottons
Cottons Eco
Synthetics
Daily Xpress
Xpress Super Short
Rinse
Gentle Care
Outdoor
Sports
Mix 40
Woollens
Hand Wash
Spin+Drain
Down Wear
Lingerie
StainExpert
Dark Care
Jeans
Shirts
12364 5
7
8
910
11
12
EN / 14
Washing Machine / User’s Manual
4.4 Screenshot
1 2 3 4
5
6
7
98
111213
14
10
1 - Temperature ndcator
2 - Temperature symbol
3 - No water symbol
4 - Programme follow-up ndcator
5 - Quck wash ndcator
6 - Duraton nformaton
7 - Auxlary functons lght 1
8 - Dosng symbols
9 - Auxlary functons lght 2
10 - Delayed start enabled symbol
11 - Door lock s engaged symbol
12 - Chld lock enabled symbol
13 - Auxlary functons lght 3
14 - Spn speed selecton ndcator
EN / 15
Washing Machine / User’s Manual
5.Technical specifications
Complying Commission Delegated Regulation (EU) No 1061/2010
Supplier name or trademark Beko
Model name WTV 8744 XDW
Rated capacity (kg) 8
Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) A+++
Annual Energy Consumption (kWh) (1) 175
Energy consumption of the standard 60°C cotton programme at full load (kWh) 0,915
Energy consumption of the standard 60°C cotton programme at partial load (kWh) 0,710
Energy consumption of the standard 40°C cotton programme at partial load (kWh) 0,630
Power consumption in ‘off-mode’ (W) 0,500
Power consumption in ‘left-on mode’ (W) 0,700
Annual Water Consumption (l) (2) 9239
Spin-drying efficiency class / Scale from A (Highest Efficiency) to G (Lowest Efficiency) B
Maximum spin speed (rpm) 1400
Remaining moisture Content (%) 53
Standard cotton programme (3) Cotton Eco 60°C and 40°C
Programme time of the standard 60°C cotton programme at full load (min) 260
Programme time of the standard 60°C cotton programme at partial load (min) 235
Programme time of the standard 40°C cotton programme at partial load (min) 230
Duration of the left-on mode (min) N/A
Airborne acoustical noise emissions washing/spinning (dB) 51/74
Built-in No
Height (cm) 84
Width (cm) 60
Depth (cm) 59
Net weight (±4 kg.) 70
Single Water inlet / Double Water inlet • / -
• Available
Electrical input (V/Hz) 230 V / 50Hz
Total current (A) 10
Total power (W) 2200
Main model code 9811
(1) Energy Consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load, and the
consumption of the low-power modes. Actual energy consumption will depend on how the appliance is used.
(2) Water consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load. Actual water
consumption will depend on how the appliance is used.
(3) “Standard 60°C cotton programme” and the “standard 40°C cotton programme” are the standard washing programmes to which the
information in the label and the fiche relates and these programmes are suitable to clean normally soiled cotton laundry and that they are the
most efficient programmes in terms of combined energy and water consumption.
Technical specifications may be changed without prior notice to improve the quality of the product.
EN / 16
Washing Machine / User’s Manual
6. Installaton
6.1 Approprate nstallaton locaton
WARNING!
• Damaged products cause rsks for your safety.
- Pror to nstallaton, vsually check f the product has any
defects on t.
- If so, do not have t nstalled.
CAUTION!
• Do not place the product on a floor wthout suffcent
capacty to carry the load.
- Otherwse, the product or the floor may be damaged.
- Total weght of the washng machne and the dryer -wth
full load- when they are placed on top of each other s
approx. 180 klograms.
• Do not nstall the product n places where there s the rsk
of freezng.
- Otherwse, your product wll be damaged and your house
wll be under rsk of flood.
NOTE
• Preparaton of the locaton and electrcal, tap water and
waste water nstallatons at the place of nstallaton
s under customer's responsblty. Make sure that the
nstallaton and electrcal connectons of the product are
performed by competent persons.
• Make sure that the water nlet and dran hoses as well as
the power cable are not folded, pnched or crushed whle
pushng the product nto ts place after nstallaton or
cleanng procedures.
• Manufacturer shall not be held lable for damages that may
arse from procedures carred out by unauthorsed persons.
a) Place the product on a rgd, flat and level surface.
b) Never place the product on a carpet-covered floor.
c) Do not lean the product on furnture, keep a dstance between
them.
d) Do not place the product on any platform.
EN / 17
Washing Machine / User’s Manual
6.2 Removng packagng renforcement
CAUTION!
• Seek someone's help for ths procedure.
- Rsk of gettng njured.
To remove the packagng renforcement;
a) Tlt the product backwards.
b) Remove the packagng renforcement by pullng the
rbbon.
EN / 18
Washing Machine / User’s Manual
6.3 Removng transportaton safety bolts
CAUTION!
• Remove the transportaton safety bolts before operatng
the product!
- Otherwse, the product wll be damaged.
a) Loosen all transportaton safety bolts wth an
approprate wrench untl they turn freely.
b) Remove transportaton safety bolts by turnng them
gently.
c) After removng bolts, close the holes wth plugs
provded n the user manual bag.
NOTE
• Keep the transportaton safety bolts n a safe place for
reuse when the product needs to be moved agan n the
future.
• Before movng the product, nstall the transportaton
safety bolts n reverse order of the dsassembly procedure.
EN / 19
Washing Machine / User’s Manual
6.4 Connectng water supply
CAUTION!
• The water supply pressure requred to run the product s
between 1 to 10 bars (0.1 – 1 MPa). (It s necessary to have
10 – 80 ltres of water flowng from the fully open tap per
mnute.)
- Attach a pressure reducng valve f water pressure s
hgher.
• Do not use old or used water nlet hoses on the new
product.
- It may cause stans on your laundry.
• Do not plug the product's cold water nlet to hot water
outlet.
- Your laundry may get damaged or the product wll swtch
to protecton mode and wll not operate.
a) Connect the straght end of the mans nlet hose
provded wth the product to the cold water tap and
the warped end to the water nlet on the back of the
product as shown n the fgure.
b) Tghten all hose nuts by hand securely. Never use a
tool when tghtenng the nuts.
c) Open the taps completely after makng the hose
connecton to check for water leaks at the connecton
ponts. If any leaks occur, turn off the tap and remove
the nut. Retghten the nut carefully after checkng
the seal. Turn the tap on and repeat the checks.
d) Keep the taps closed when the product s not n use.
EN / 20
Washing Machine / User’s Manual
6.5 Connectng the water dranng hose to the dran
CAUTION!
• Attach the end of the dran hose drectly to waste water
dran, washbasn or bathtub.
• Do not contact the dscharged water. Rsk of beng burnt as
the water may be hot.
• Fx the water dran hose end completely to prevent rsk of
dslocaton.
a) Connect the water dran hose to a mnmum heght of 40 cm and a
maxmum heght of 100 cm.
b) The product may fal f water dran hose s at or close to floor level
(under 40 cm) as t would take water n and out contnuously.
c) The product may fal f water dran hose s placed hgher than 100 cm
as t cannot dscharge water and water stays nsde the product.
Therefore, follow the heghts descrbed n the fgure.
40 cm
100 cm
d) To prevent the waste water to go back nto the product agan and to
ensure easy dranage, do not mmerse the end of the hose nto the
waste water or do not nsert t nto the dran for more than 15 cm. If t
s too long, cut t short.
e) The end of the hose should not be bent, t should not be stepped
on and the hose must not be pnched between the dran and the
product.
f) If the length of the hose s too short, use t by addng an orgnal
extenson hose. Total length of the hose may not be longer than 3.2
m. Otherwse, the product may fal as t would take water n and out
contnuously.
EN / 21
Washing Machine / User’s Manual
6.6 Adjustng the feet
CAUTION!
• Adjust feet so that the product wll be balanced on the
locaton t wll be used.
- Balance the machne by adjustng the feet.
- Check for any play by pressng the product from upper
dagonal edges.
- Otherwse, the product may move from ts place and
cause crushng and vbraton problems.
• Do not use any tools to loosen the lock nuts. Otherwse, the
lock nuts may get damaged.
a) Loosen the lock nuts on the feet by hand.
b) Adjust the feet untl the product stands level and balanced.
c) Tghten all lock nuts agan by hand.
EN / 22
Washing Machine / User’s Manual
6.7 Electrcal connecton
DANGER!
• Damaged power cables must be replaced by the Authorsed
Servce Agents.
a) Connect the product to a grounded outlet protected by a 16 A fuse.
NOTE
• Our company shall not be lable for any damages that
wll arse when the product s used wthout groundng n
accordance wth the local regulatons.
• If the current value of the fuse or breaker n the house s
less than 16 Amps, have a qualfed electrcan nstall a 16
Amp fuse.
• Do not make connectons va extenson cables or mult-
plugs.
b) Connecton must comply wth natonal regulatons.
c) The wrng for the electrcal outlet crcut must be suffcent to meet
the applance requrements. Use of a Groud Fault Crcut Interrupter
(GFCI) s recommended.
d) Power cable plug must be wthn easy reach after nstallaton.
e) The voltage specfed n the “(5.) Techncal specfcatons" secton
must be equal to your mans voltage.
EN / 23
Washing Machine / User’s Manual
6.8 Electrcal requrements
a) Before you nsert the plug nto the wall socket make sure that the
voltage and the frequency shown n the ratng label corresponds to
your electrcty supply.
b) We recommend that ths applance be connected to the mans
supply va a sutable swtched and fused socket n a readly
accessble poston.
c) Should the mans lead of the applance become damaged or need
replacng at any tme, t must be replaced by a specal purpose made
mans lead whch can only be obtaned from an Authorsed Servce
Agent.
WARNING!
• Ths applance must be earthed .
CAUTION!
• If the ftted moulded plug s not sutable for your socket,
then the plug should be cut off and an approprate plug
ftted.
- Balance the machne by adjustng the feet.
- Check for any play by pressng the product from upper
dagonal edges.
- Otherwse, the product may move from ts place and
cause crushng and vbraton problems.
• Destroy the old plug, a cut off plug wth a bare cord could
cause a shock hazard f nserted nto a socket elsewhere n
the house.
• The moulded plug on ths applance ncorporates a 13A
fuse. Should the fuse need to be replaced an ASTA
approved BS1362 fuse of the same ratng must be used.
- Do not forget to reft the fuse cover. In the event of
losng the fuse cover, the plug must not be used untl a
replacement fuse cover has been ftted.
- Colour of the replacement fuse cover must be the same
colour as that vsble on the pn face of the plug.
- Fuse covers are avalable from any good electrcal store.
EN / 24
Washing Machine / User’s Manual
6.9 Fttng a dfferent plug
As the colours of the wres n the mans lead of
ths applance may not correspond wth the
coloured markngs dentfyng the termnals on
your plug, proceed as follows:
a) Connect the green - yellow or green (earth) wre to the
termnal n the plug marked ‘E’ or wth the symbol or
coloured green and yellow or green.
b) Connect the blue (neutral) wre to the termnal n the
plug marked ‘N’ or coloured black.
c) Connect the brown (lve) wre to the termnal n the
plug marked ‘L’ or coloured red.
Wth the alternatve plugs a 13A fuse must be
ftted ether n the plug or adaptor or n the
man fuse box. If n doubt contact a qualfed
electrcan.
6.10 Transportaton of the product
a) Unplug the product before transportng t.
b) Remove water dran and water supply connectons.
c) Dran all water that has remaned n the product.
d) Install transportaton safety bolts n the reverse order of removal
procedure.
NOTE
• Never move the product wthout the transportaton safety
bolts properly fxed n place!
WARNING!
• Packagng materals are dangerous to chldren. Keep
packagng materals n a safe place away from reach of the
chldren.
EN / 25
Washing Machine / User’s Manual
7. Intal use
7.1 Drum cleanng
NOTE
• Apply drum cleanng wthout any laundry n the product.
a) Use the Drum Cleanng programme.
b) Set the temperature to the level recommended on the specal drum
cleanng agent package whch can be provded from Authorsed
Servce Agents.
c) Before startng the programme, put 1 pouch of specal drum cleanng
agent (f the specal agent could not be suppled, put max. 1 teaspoon
of (max. 100 g) of powder ant-lmescale) nto the man wash
detergent compartment. If the ant-lmescale s n tablet form, put
only one tablet nto the man wash compartment.
d) Start the programme.
e) Dry the nsde of the bellow wth a clean pece of cloth after the
programme has come to an end.
NOTE
• Repeat Drum Cleanng every 2 months.
EN / 26
Washing Machine / User’s Manual
8. Preparng to wash
8.1 Sortng the laundry
a) Sort laundry accordng to type of fabrc, colour, and degree of solng
and allowable water temperature.
a) Follow nstructons on the garment tags.
a) Do not wash colours and whtes together. New and dark coloured
cottons may release a lot of dye.
LAUNDRY WASH SYMBOLS
Symbols for
washing on
machine
Normal wash
No Iron
Sensitive-
Delicate
wash
Hand wash
Not washable
No Spin
WASH Water
temperatures
Maximum 950C700C600C500C400C300C
Symbol(s)
Drying
symbols Suitable for
dryer No ironing Sensitive /
delicate dry
Do not dry
with dryer
Do not dry Do not
dry-
clean
DRYING
Drying settings
At any temperature
At high temperature
At medium
temperature
At low temperature
Without heating
Hang to dry
Lay to dry
Hang wet to dry
Lay in shadow
to dry
Dry-cleanable
Iron
IRON Dry or steam
Iron at high
temperature
Iron at medium
temperature
Iron at low
temperature
No ironing
Iron without
steam
Maximum temperature 200 0C150 0C110 0C
All bleaches are allowed
Bleach (sodium
hypochlorite)
can be used
Bleach is not
allowed
Only bleaches without
chlorine are allowed
BLEACH
EN / 27
Washing Machine / User’s Manual
8.2 Preparng laundry for washng
a) Remove the metal peces such as support wre, belt buckle or metal
buttons or wash the clothes by puttng them n a laundry bag or
pllow case.
b) Take out all substances n the pockets such as cons, pens and paper
clps, and turn pockets nsde out before washng.
c) Put small sze clothes such as nfant socks and nylon stockngs n a
laundry bag or a pllow case.
d) Close zpper and fasten the buttons.
e) Wash products wth hand-washable or other tags only wth an
approprate programme.
f) Tough stans must be treated properly before washng.
g) Wash trousers and delcate laundry turned nsde out.
h) Laundry that are subjected to materals such as flour, lme dust, mlk
powder, etc. ntensely must be shaken off before placng nto the
product.
8.3 Loadng and removng the laundry
a) Open the loadng door.
b) Do not pack laundry nsde the product tghtly.
c) Push the loadng door to close untl you hear a lockng sound.
d) Ensure that no tems are caught n the door. Loadng door wll be
locked after the programme has started.
e) The door lock wll open mmedately after the washng programme
has ended. Then you can open the loadng door. If the door does
not open, apply the solutons provded for "Loadng door cannot be
opened." error n the Troubleshootng secton.
EN / 28
Washing Machine / User’s Manual
8.4 Usng detergent and softener
8.4.1 Detergent drawer
1 2 3
The detergent drawer s composed of three compartments:
– (1) Lqud detergent compartment
– (2) Powder detergent compartment
– (3) Softener compartment
8.4.2 Detergent, softener and other cleanng agents
NOTE
• When usng detergent, softener, starch, fabrc dye, bleach
and descalng agents to be added through the detergent
contaner 2, read the manufacturer's nstructons wrtten
on the package and follow the dosages specfed. Use a
measurng cup, f any.
• For programmes where lqud detergent dosng s selected,
do not add any powder detergent.
CAUTION!
• Do not use lqud detergents or other cleanng products
other than fabrc softeners produced for washng machnes
to soften the clothes.
• Do not use washng agents such as vscous jelly detergents
n detergent drawers or dosng compartments.
• Do not use soap powder.
• Use only detergents manufactured specfcally for washng
machnes.
EN / 29
Washing Machine / User’s Manual
a) Add detergent and softener before startng the washng
programme.
b) Place the detergent bag or the dspensng ball drectly among the
laundry n the product.
c) There s no pre-wash compartment or pre-wash opton n your
product.
CAUTION!
• Close the detergent drawer before startng the washng
programme and never open the drawer whle the product s
runnng.
8.4.3 Auto dosng
Intal setup
a) Swtch on the machne by pressng the on/off button.
b) The dosng symbol ( ) wll appear n programmes that permt
detergent dosng.
c) If the lqud detergent and softener compartments are empty or the
remanng agents n these compartments are below the lmts, the
relevant dosng symbol wll flash n programmes that permt dosng.
Addng lqud detergents and softeners
a) Pull the detergent drawer towards yourself to open
t.
b) To add lqud detergent (left) and softener (rght),
open the ld of the relevant contaner upwards as
shown n the mage.
EN / 30
Washing Machine / User’s Manual
MAX
c) When addng lqud detergent or softener, do not
exceed the tp of the «Max» label.
d) Close the ld.
e) Close the detergent drawer by pushng t slowly.
f) After closng the detergent drawer, the flashng
dosng symbol ( ) wll start to lght up steadly.
g) Ths ndcates that the components are flled and
the drawer s closed.
h) For coloured and whte laundry, t s recommended
to fll commonly used lqud detergent n the
compartment.
) Despte the fact that the detergent compartments
are flled, f detergent symbol contnues to flash,
the detergent drawer s not fully closed. Ensure
that the drawer s seated n place by pushng t.
CAUTION!
• Whle the detergent drawer s full wth detergent and/or
softener:
a- Do not pull the machne,
b- Do not change ts place,
c- Do not tlt the machne to ts sde or back.
• To make these actons, frst you should take out the drawer
from the machne.
• If you wsh to start the programme when there s no
detergent n the detergent drawer, please remember that
you must cancel the lqud detergent dosng and wash the
laundry wth powder detergent.
• The lqud detergent dosng contaner must be flled only
wth lqud detergent, and the softener dosng contaner
only wth softener. Fllng these compartments wth any
knd of lqud or powder chemcal other than these may
harm your laundry or washng machne.
EN / 31
Washing Machine / User’s Manual
8.4.4 Dose selecton and cancellaton
or powder detergent use
a) For some programmes of the machne, lqud detergent could not be
selected. In such cases, powder detergent should be used. Please
see the Programme Table for detals.
b) After selectng the temperature, spn speed and auxlary functon,
start the programme by pressng the started/pause button.
c) The machne wll determne the requred amount of detergent
dependng on the selectons made. Durng the washng operaton,
the detergent ntake s not vsble, t wll be taken n drectly wth the
water.
d) If t s requested to use powder detergent n programmes where
detergent dosng system actvates requred amount of powder
detergent should be added to the detergent compartment. If you
wsh to use the detergent compartment n the mddle, you need to
cancel your lqud detergent selecton.
e) Program s started by pressng Start/Pause button. When the
machne starts to take n water, the powder detergent wll also be
taken n.
f) If you want to use a lqud detergent whose characterstcs
are dfferent than that of the detergent n the lqud detergent
compartment for once, you must add the dfferent lqud detergent
nto the mddle powder detergent compartment and cancel your
lqud detergent selecton.
g) The softener will be taken in through the dosing system.
Lqud detergent and softener dosng symbols wll
be actve or nactve dependng on the programme
selected on the dsplay.
a) If the liquid detergent symbol is on, this means that liquid detergent
dosing is active.
b) If the softener symbol is on, this means that softener dosing is
active.
EN / 32
Washing Machine / User’s Manual
c) If the liquid detergent symbol is off, this means that you can wash
your laundry with powder detergent.
d) If the softener symbol is off, this means no softener will be used in
the rinsing step.
The frst poston on the dsplay: means lqud detergent s actve, softener
s on.
If lqud detergent and softener symbols are actve on the dsplay, the lqud
detergent wll become on and the softener wll become off after you press
the Auto Dosng key for the frst tme.
When you press the Auto Dosng key for the second tme, powder detergent
and softener wll become on.
When you press the Auto Dosng key for the thrd tme, powder detergent
wll become on and softener wll become off. Fnally, when you press t for
the fourth tme, t wll return to the ntal poston.
8.4.5 When the detergent and/or softener run(s) out:
a) When the detergent or softener n the detergent compartment
runs out, the “dosng symbol” on the dsplay wll flash. When ths
symbol flashes, you need to add detergent or softener to the dosng
compartment. The product can dose for 2 to 3 cycles as of the
moment that the symbol flashes.
8.4.6 Addng detergent or softener
to the wrong compartment:
a) If the detergent or softener s added to the wrong compartments,
see 13.1 “Cleanng the detergent drawer”.
8.4.7 Choosng the detergent
NOTE
• Detergent type to be used depends on the fabrc type and
color.
a) Use dfferent detergents for coloured and whte laundry.
b) Wash your delcate clothes only wth specal detergents (lqud
detergent, wool shampoo, etc.) used solely for delcate clothes.
c) When washng dark coloured clothes and qults, t s recommended
to use lqud detergent.
d) Wash woolens wth a specal detergent made specfcally for
woolens.
EN / 33
Washing Machine / User’s Manual
8.4.8 Adjustng detergent amount
a) The amount of washng detergent to be used depends on the
amount of laundry, the degree of solng and water hardness.
b) Do not use amounts exceedng the dosage quanttes recommended
on the detergent package to avod excessve foam and poor rnsng.
c) Use lesser detergent for small amounts or lghtly soled clothes.
8.4.9 Usng tablet and capsule lqud detergents
a) If tablet s a capsule wth lqud detergent, put t drectly nto the
drum before washng.
b) Put tablet detergents nto the man wash compartment or drectly
nto the drum before washng.
8.4.10 Usng starch
a) Place lqud or dust starch on softener compartment and start the
rnsng programme.
b) Do not use softener and starch together.
c) Use drum cleanng descrbed n Intal use secton after usng starch.
8.4.11 Usng lmescale remover
a) When requred, use lmescale removers manufactured specfcally
for washng machnes only.
8.4.12 Usng bleaches
a) Do not use bleachng agent and detergent by mxng them.
b) Oxygen-based bleach can be used together wth the detergent.
c) Do not pour the bleach onto the laundry.
d) Do not use t wth the colored tems.
e) When usng oxygen based bleaches, select a programme that
washes at a lower temperature.
EN / 34
Washing Machine / User’s Manual
9. Programmes and Auxlary Functons
9.1 Programme selecton
NOTE
• Programmes are lmted wth the hghest spn speed
approprate for that partcular type of fabrc.
• When selectng a programme, always consder the type
of fabrc, colour, degree of solng and permssble water
temperature.
• Always select the relevant lowest requred temperature.
Hgher temperature means hgher electrcty consumpton.
a) Select the desred programme wth the Programme Selecton button.
NOTE
• If no programme s started or no key s pressed wthn 10
mnute durng programme selecton process, the product
wll turn off automatcally. Dsplay and all ndcators wll
turn off.
• If you press on the On / Off button, the programme
nformaton set as default wll be dsplayed.
EN / 35
Washing Machine / User’s Manual
9.2 Programmes
NOTE
• You can see laundry type and washng suggestons on
clothng tags.
• Cottons Eco
Use to wash your normally soled, durable cotton and lnen laundry.
Although t washes longer than all other programmes, t provdes hgh
energy and water savngs. Actual water temperature may be dfferent from
the stated wash temperature. When you load the machne wth less laundry
(e.g. ½ capacty or less), perods n programme stages may automatcally
get shorter. In ths case, energy and water consumpton wll decrease more,
provdng a more economc wash.
NOTE
• Actual water temperature may be dfferent from the
stated wash temperature.
• Cottons
You can wash your durable cotton laundry (sheets, bedlnen, towels,
bathrobes, underwear etc.) n ths programme.
When the “Quck Wash” settng key s pressed, programme duraton
becomes notably shorter but effectve washng performance s ensured
wth ntense washng movements. If the “Quck Wash” settng key s not
pressed, superor washng and rnsng performance s ensured for your
heavly soled laundry.
• Synthetcs
You can wash your laundry (such as shirts, blouses,
synthetic/cotton blended fabrics etc.) in this programme.
When the ”Quck Wash” settng key s pressed, programme
duration gets notably shorter and the machine washes
with high performance. If the “Quck Wash” settng key s
not pressed, superior washing and rinsing performance is
ensured for your heavily soiled laundry.
• Woollens / Hand Wash
Use to wash your woolen/delcate laundry. Select the approprate
temperature complyng wth the tag of your clothes. Your laundry wll
be washed wth a very gentle washng acton n order not to damage the
clothes.
Select ths programme to wash delcate curtans of max. 2 kg. Wash wth
stan removers or powder detergent f you want whter curtans.
EN / 36
Washing Machine / User’s Manual
"Woolens programme of ths machne s approved by “The Woolmark
Company” for washng machne-washable woolen products provded that
the products are washed n accordance wth the nstructons on the product
tag and the nstructons publshed by the manufacturer of ths machne. "
M1325”
In the UK, Ireland, Hong Kong and Inda, the Woolmark trademark s a
Certfcaton trademark.
• Hygene+
Use ths programme for your laundry (baby clothes, bed sheets, bedlnen,
underwear, etc. cotton tems) for whch you requre an ant-allergc and
hygenc washng at hgh temperature wth ntensve and long washng
cycle. The hgh level of hygene s ensured thanks to long heatng duraton
and addtonal rnsng step.
• Programme was tested by the “VDE” nsttute wth the 20°C
temperature opton selected and t was certfed n terms of ts effcacy n
elmnatng bactera and mould.
• Programme was tested by “The Brtsh Allergy Foundaton”
(Allergy UK) wth the 60°C temperature opton selected and t was certfed
n terms of ts effcacy n elmnatng allergens n addton to bactera and
mould.
Allergy UK s the brand of the Brtsh Allergy Assocaton. Seal of Approval
s created to gude people that requre recommendaton about a product
that the related product restrcts / reduces / elmnates the allergens or
reduces the allergen content sgnfcantly n the ambent where allergy
patents exst. It ams to provde assurance that the products are tested
scentfcally or examned n a way to provde measurable results.
• Dark Care / Jeans
Use ths programme to protect the colour of your dark-coloured garments or
jeans. It performs hgh performance washng wth specal drum movement
even f the temperature s low. It s recommended to use lqud detergent
or woolen shampoo for dark coloured laundry. Do not wash your delcate
clothes contanng wool or etc.
• Outdoor / Sports
You can use ths programme to wash sports and outdoors garments that
contan cotton/synthetcs mx and water repellent covers such as gore-
tex etc. It makes sure your garments are washed gently thanks to specal
rotatng movements.
EN / 37
Washing Machine / User’s Manual
• Spn+Dran
Use to dran the water n the product.
• Rnse
Use when you want to rnse or starch separately.
• Shrts
Ths programme s used to wash the shrts made from cotton, synthetc and
synthetc blended fabrcs altogether. It reduces wrnkles. When the "Quck
Wash" settng button s pressed, the Pre-treatment algorthm s executed.
• Apply the pre-treatment chemcal on your garments drectly or
add t together wth the detergent when the machne starts to take water
n the powder detergent compartment. Thus, you can obtan the same
performance as you obtan wth normal washng n a much shorter perod of
tme. Usage lfe of your shrts ncreases.
• Mx 40
Use to wash your cotton and synthetc clothes together wthout sortng
them.
• Gentle Care
You can wash your delcate clothes such as cotton/synthetc blended
kntwear or hosery n ths programme. It washes wth more delcate
washng acton. Wash your clothes whose colour you want to preserve
ether at 20 degrees or by selectng the cold wash opton.
• Daly Xpress / Xpress Super Short
Use ths programme to wash your lghtly soled and unspotted cotton
clothes n a short tme. When the “Quck Wash” settng button s pressed,
the programme duraton can shorten down to 14 mnutes and a maxmum
of 2 (two) klograms of laundry must be washed n ths programme.
EN / 38
Washing Machine / User’s Manual
• StanExpert
The machne has a specal stan programme whch enables the removal of
dfferent types of stans n the most effectve way. Use ths programme
only for durable colourfast cotton laundry. Do not wash delcate and
pgmentng clothes and laundry n ths programme. Before washng,
garment tags should be checked (recommended for cotton shrts, trousers,
shorts, t-shrts, baby clothes, pyjamas, aprons, table clothes, bed sheets,
duvet covers, pllowcases, bath-beach towels, towels, socks, cotton
underwear that are sutable for washng at hgh temperature and long
tme). You can use automatc stan programme to wash 24 types of stans
dvded nto three dfferent groups that can be selected wth the “Quck
Wash” settng button. Below you can fnd the sol groups that can be
selected wth the “Quck Wash” settng button. Dependng on the selected
stan group, a specal washng programme for whch duraton of rnse hold,
washng acton, washng and rnsng duraton are modfed.
Below you can fnd the sol groups that can be selected wth the “Quck
Wash” settng button:
When "Quck Wash" s not
selected
Sweat
Collar sol
Meal
Mayonnase
Salad dressng
Make-up
Machne ol
Baby food
When the "Quck Wash" button
s pressed once
Blood
Chocolate
Puddng
Grass
Mud
Egg
Butter
Curry
EN / 39
Washing Machine / User’s Manual
When the "Quck Wash" button
s pressed twce
Tea
Coffee
Frut juce
Ketchup
Red wne
Starch
Jam
Coal
• Select the stan programme.
• Select the stan you want to clean by locatng t n the groups above and usng the "Quck
Wash" settng button. For detaled nformaton, see the Programme settngs secton.
• Read the garment tag carefully and ensure that correct temperature and spn speed are
selected.
• Down Wear
Use ths programme to wash your coats, vest, jackets etc. contanng
feathers wth a "machne-washable" label on them. Thanks to specal
spnnng profles, t s ensured that the water reaches the ar gaps amongst
the feathers.
• Lngere
You can use ths programme to wash delcate garments that are sutable
for hand wash and delcate women's underwear. Small amount of garments
must be washed n a washng net. Hooks, buttons etc. must be done up and
zps must be zpped up.
EN / 40
Washing Machine / User’s Manual
9.3 Programme table
• : Selectable.
* : Automatcally selected, cannot be cancelled.
** : Energy Label programme (EN 60456 Ed.3)
***
:If maxmum spn speed of the product s lower then ths value, you can only select
up to the maxmum spn speed.
-
:
See the programme descrpton for maxmum load.
EN 2Auxiliary functions
Programme
Max. Load (kg)
Water Consumption (l)
Energy Consumption (kWh)
Max. Speed***
Night Mode
Extra Rinse
Anti-Creasing+
Auto Dosing
Selectable
temperature range
°C
Cottons
90 8 94 2,40 1400 •••• Cold-90
60 8 94 1,70 1400 •••• Cold-90
40 8 92 0,85 1400 •••• Cold-90
20 8 92 0,55 1400 •••• Cold-90
Cottons Eco
60** 8 44 0,915 1400 • Cold-60
60** 4 40,5 0,710 1400 • Cold-60
40** 4 40,5 0,630 1400 • Cold-60
Synthetics 60 3 65 1,20 1200 • • • • Cold-60
40 3 63 0,78 1200 • • • • Cold-60
Daily Xpress / Xpress Super Short
90 8 69 2,10 1400 • • • • Cold-90
60 8 69 1,05 1400 • • • • Cold-90
30 8 66 0,15 1400 • • • • Cold-90
Daily Xpress / Xpress Super Short + Express 30 2 36 0,15 1400 • •• • Cold-30
Mix 40 40 3,5 71 0,80 800 • • • Cold-40
Woollens / Hand Wash 40 1,5 52 0,46 1200 • • • Cold-40
Gentle Care 40 3,5 52 0,58 800 • • • Cold-40
Down Wear 60 2 84 0,80 1000 • • • Cold-60
Outdoor / Sports 40 3,5 52 0,40 1200 • Cold-40
Dark Care / Jeans 40 3,5 83 0,85 1200 • * • • Cold-40
StainExpert 60 4 85 1,50 1400 • 30-60
Shirts 60 3 59 1,10 800 • • • Cold-60
Hygiene+ 90 8 110 2,30 1400 *• 20-90
Lingerie 30 1 68 0,30 600 * • Cold-30
Drum Clean 70 - 72 2,15 600 70
EN / 41
Washing Machine / User’s Manual
** “Cotton Economc 40°C" and "Cotton Economc 60°C" are
standard programmes. These programmes are known as
"40°C cotton standard programme" and "60°C cotton standard
programme" and ndcated wth the symbols on the
panel.
NOTE
• Water and power consumpton may vary from the above
table subject to the changes n water pressure, water
hardness and temperature, ambent temperature, type and
amount of laundry, selecton of auxlary functons and spn
speed, and changes n electrc voltage.
• You can see the washng tme of the programme you have
selected on the dsplay of the product. It s normal that
small dfferences may occur between the tme shown on
the dsplay and the real washng tme.
• Auxlary functon selecton modes can be changed by the
manufacturng company. Exstng selecton modes can be
removed or new selecton modes can be added.
• "The manufacturer reserves the rght to make
modfcatons n the programmes and auxlary functons
gven n the table. Whle these modfcatons wll not
change the product performance, programme steps and
duratons can change."
Indcatve values for Synthetcs programmes (EN)
Load (kg)
Water
Consumpton
(l)
Energy
Consumpton
(kWh)
Programme
Duraton
(mn) *
Remanng Mosture
Content (%) **
Remanng Mosture
Content (%) **
rpm 1000 ≥ rpm 1000 <
Synthetcs 60 3 65 1.20 115/150 45 40
Synthetcs 40 3 63 0.78 115/150 45 40
* You can see the washng tme of the programme you have selected on the dsplay of the machne. It s normal that
small dfferences may occur between the tme shown on the dsplay and the real washng tme.
** Remanng mosture content values may dffer accordng to the selected spn speed.
EN / 42
Washing Machine / User’s Manual
9.4 Auxlary functon selecton
NOTE
• When you try to change an auxlary functon that s not
allowed to be selected wth the current programme,
ndcator lght of the relevant auxlary functon wll not
flash, only an audo warnng s gven. Frames of avalable
optons wll be lt.
• If a second auxlary functon conflctng wth the frst one s
selected before startng the product, the functon selected
frst wll be canceled and the second auxlary functon
selecton wll reman actve.
• An auxlary functon that s not compatble wth the
programme cannot be selected. (See "Programme and
consumpton table")
• Some programmes have auxlary functons that must
be operated smultaneously. Those functons cannot be
cancelled. The frame of the auxlary functon wll not be
llumnated, only nner area wll be llumnated.
a) Select the desred auxlary functons before startng the programme.
b) LED lght of the selected auxlary functon turns on.
NOTE
• You may select or cancel auxlary functons sutable for the
current programme after the washng has started. If the
wash cycle has reached a pont where no auxlary functon
can be selected, an audo warnng wll be gven.
EN / 43
Washing Machine / User’s Manual
9.4.1 Auxlary functons
• Extra Rnse
Ths functon enables the product to make another rnsng n addton to
the one already made after the man wash. Thus, the rsk for senstve
skns (babes, allergc skns, etc.) to be effected by the mnmal detergent
remnants on the laundry can be reduced.
• Nght Mode
Use to wash the cottons wth lesser energy consumpton and slently. Spn
steps are cancelled for a slent washng and the cycle ends wth the Rnse
Hold step. After completon of the programme, run Spn cycle to spn the
laundry.
• Auto Dosng
Wth ths auxlary functon key, you can change your detergent and dose
preferences. For detaled nformaton, see 8.4.4 “Dose selecton and
cancellaton or powder detergent use”
EN / 44
Washing Machine / User’s Manual
9.4.2 "Functons/Programmes Selected by
Pressng the Functon Buttons for 3 Seconds"
• Drum Clean 3’’
CAUTION!
• Ths s not a washng programme. It s a mantenance
programme.
• Do not run ths programme when there are any objects n
the machne. If you try to do so, the machne detects that
there s a load nsde and aborts the programme.
Press and hold the auxlary functon button 1 for 3 seconds to select the
programme.
Use regularly (once n every 1-2 months) to clean the drum and provde the
requred hygene. Operate the programme whle the machne s completely
empty. To obtan better results, put powder lme-scale remover for washng
machnes when the powder detergent functon s selected. When the
programme s over, leave the loadng door ajar so that the nsde of the
machne gets dry.
• Ant-Creasng+
Ths functon s selected by pressng the Quck Wash+ button for 3 seconds
and after selectng, the related programme follow-up lght wll become
on. When the functon s selected, the drum rotates for up to 8 hours for
preventng the laundry from creasng at the end of the programme. You
can cancel the programme and take your laundry out at any tme durng the
8-hour duraton. Press the functon selecton key or the machne on/off
key to cancel the functon. The programme follow-up lght wll reman on
untl the functon s canceled or the step s complete. If the functon s not
cancelled, t wll be actve n the subsequent washng cycles as well.
EN / 45
Washing Machine / User’s Manual
• Auto Dosng Settng
You can enable ths functon by pressng the auxlary functon key 3 for 3
seconds. Wth ths functon, the dosng amounts of the Lqud Detergent
and Softener are changed.
Changng the dosng amounts of Lqud Detergent and
Softener:
a) Press and hold Auxiliary Function
button 3 for 3 seconds.
b) You can press the “Temperature”
selection button to change the
liquid detergent dosing levels as
below.
1: Low
2: Medium
3: High
c) You can press the “Spin” selection
button to change the softener
dosing levels as below.
1: Low
2: Medium
3: High
d) After setting the dosing amounts, you can press the auto dosing key to return to the
main menu. For all programmes, dosing will be performed based on the latest settings
you have selected until you select a new setting.
EN / 46
Washing Machine / User’s Manual
• Chld Lock 3’’
Use Chld Lock functon to prevent chldren from tamperng wth the
product. Thus you can avod any changes n a runnng programme.
NOTE
• You can swtch on and off the product wth On / Off button
when the Chld Lock s actve. When you swtch on the
product agan, programme wll resume from where t has
stopped.
To actvate the Chld Lock:
a) Press and hold 2nd Auxlary Functon button for 3 seconds.
b) Programme selecton dsplay on the panel wll count down as “3, 2,
1”.
c) The "symbol" on programme selecton dsplay on the panel wll
appear.
60
800
3
60
800
To deactvate the Chld Lock:
a) Press and hold 2nd Auxlary Functon button for 3 seconds.
b) Programme selecton dsplay on the panel wll count down as “3, 2,
1”.
c) The "symbol" on programme selecton dsplay on the panel wll
dsappear.
60
800
3
60
800
2 45
EN / 47
Washing Machine / User’s Manual
10. Programme settng
10.1 Temperature selecton
a) Whenever a new programme s selected, the recommended
temperature for the selected programme appears on the
temperature ndcator.
b) To decrease the temperature, press the Temperature Adjustment
button. Temperature wll decrease gradually.
c) It turns back to the begnnng after "Cold" opton and arrves at the
hghest temperature selectable accordng to the programme.
60
800
2 30
10.2 Spn speed selecton
a) Whenever a new programme s selected, the recommended spn
speed of the selected programme s dsplayed on the spn speed
ndcator.
b) To decrease the spn speed, press the Spn Speed Adjustment
button. Spn speed decreases gradually.
c) Maxmum speed allowed for the relevant programme appears after
pressng agan.
60
800
2 25
d) "Rnse Hold" and "No Spn" optons are shown after speed levels.
EN / 48
Washing Machine / User’s Manual
• Rnse Hold
If you are not gong to unload your clothes mmedately after the
programme completes, you can use rnse hold functon to keep your laundry
n the fnal rnsng water n order to prevent them from gettng wrnkled
when there s no water n the machne. Press Start / Pause button after
ths process f you want to dran the water wthout spnnng your laundry.
Programme wll resume and completes after dranng the water.
If you want to spn the laundry held n water, adjust the spn speed and
press Start / Pause button. The programme resumes. Water s draned,
laundry s spun and the programme s completed.
• No Spn
Use ths functon f you do not want your clothes be spun at the end of the
programme.
10.3 Quck Wash Settng (Express)
60
800
2 45
After selectng a programme, you can press the Quck Wash settng key to
shorten the programme duraton. For some programmes, the duraton can
shorten by over 50%. Despte ths, the washng performance s good thanks
to the changed algorthm.
Although t vares n each programme, when you press the Quck Wash key
once, the programme duraton decreases to a certan level, and when you
press the same key for the second tme, t drops to the mnmum level.
For a better washng performance, do not use the Quck Wash settng key
when washng heavly soled laundry.
Shorten the programme duraton by usng the Quck Wash key for
Moderately and Slghtly soled laundry.
EN / 49
Washing Machine / User’s Manual
10.4 Startng the programme
a) Press Start / Pause button to start the programme.
b) Programme follow-up lght showng the startup of the programme
wll turn on.
60
800
2 45
10.5 Programme steps
a) The symbols below appear on programme follow-up ndcator after
the programme starts.
- Wash
- Rnse
- Spn
- End
- Ant-creasng+ (Once the relevant functon has been
selected, ths symbol becomes on and remans on untl
t s cancelled. See "Functons/Programmes Selected by
Pressng the Functon Buttons for 3 Seconds")
60
800
2 45
60
800
2 45
NOTE
• "No Water" symbol appears f water s not
suppled to the product. Programme steps do
not contnue.
EN / 50
Washing Machine / User’s Manual
10.6 End of programme
a) "End" symbol appears on the dsplay when the programme s
complete.
60
800
2 45
60
800
2 45
NOTE
• If you do not press any button for 10 mnutes, the product
wll turn off automatcally. Dsplay and all ndcators are
turned off.
• Completed programme steps wll be dsplayed f you press
On / Off button.
b) Remove your laundry.
c) Swtch off the product by pressng and holdng the On/Off button
for 3 seconds.
d) Close the tap connected to the product.
e) Unplug the product.
EN / 51
Washing Machine / User’s Manual
11. Programme optons
11.1 Settng the end tme
NOTE
• Do not use lqud detergents wthout a lqud cup when you
actvate End Tme functon. There s the rsk of stanng of
the clothes.
• When the End Tme selecton s completed, the tme
appears on the dsplay s the end tme chosen plus the
duraton of the selected programme.
a) Wth the End Tme functon, the startup of the programme can
be delayed up to 24 hours. After pressng End Tme button, the
programme's estmated endng tme s dsplayed. If the End Tme s
adjusted, End Tme ndcator s llumnated.
60
800
9 30
60
800
9 30
b) Open the loadng door, place the laundry and put detergent, etc.
c) Select the washng programme, temperature, spn speed and, f
requred, the auxlary functons.
d) Set the end tme of your choce by pressng the End Tme button.
End Tme ndcator llumnates.
e) Close the loadng door.
f) Press the Start / Pause button. Tme countdown starts. “:” symbol
n the mddle of the end tme on the dsplay starts flashng and the
loadng door locks down.
NOTE
• The product enters standby mode 10 sec after pressng
Start / Pause button f the loadng door s not closed and
End Tme Settng Symbol ndcator and Start / Pause lght
starts flashng.
EN / 52
Washing Machine / User’s Manual
Addng laundry durng End Tme countdown.
a) Press the Start / Pause button.
b) The loadng door wll open and the door symbol on the dsplay wll go
off.
c) Open the loadng door and add laundry.
d) Close the loadng door.
f) Press the Start / Pause button.
60
800
9 30
11.1.1 Cancellng the end tme settng
a) If you want to cancel End Tme functon, press On / Off button for 3
sec. to turn off and on the product.
60
800
9 30
11.2 Swtchng the machne to standby mode and
addng laundry
60
800
2 45
a) Press the Start/Pause button to swtch the machne to pause mode
whle a programme s runnng.
b) Start/Pause lght and the programme step lght n the programme
follow-up ndcator wll start flashng.
EN / 53
Washing Machine / User’s Manual
c) If the water level n the machne s sutable, the door lock wll be
deactvated and the door wll open, allowng you to add garments.
The door lock con on the dsplay goes off when the door lock s
deactvated.
d) After addng garments, close the door and press Start/Pause button
once agan to resume the washng cycle.
e) If the water level n the machne s not sutable when you press
Start/Pause button, the door lock cannot be deactvated and the
door lock con on the dsplay remans on.
NOTE
• If the temperature of the water nsde the machne s
above 50°C, you cannot deactvate the door lock for safety
reasons, even f the water level s sutable.
11.3 Cancellng the programme
a) Press and hold On / Off button for 3 seconds.
NOTE
• If you press On / Off button when the Chld Lock s enabled,
the programme wll not be cancelled. You should cancel the
chld lock frst. See To deactvate the chld lock.
• If you want to open the loadng door after you have
cancelled the programme but t s not possble to open
the loadng door snce the water level n the product s
above the loadng door openng, then turn the Programme
Selecton knob to Pump+Spn programme and dscharge
the water n the product.
b) Programme selecton dsplay on the panel wll count down as “3, 2,
1”.
c) The programme s cancelled.
60
800
2 45
EN / 54
Washing Machine / User’s Manual
12. Addtonal features
12.1 Actvatng and deactvatng the audo warnng
a) Press and hold 1st and 2nd auxlary functon buttons for 3 seconds
to actvate and deactvate the audo warnng.
b) Programme selecton dsplay on the panel wll count down as “3, 2,
1”.
c) If the audo warnng s actve t wll be deactvated and vce versa.
60
800
3
bib
60
800
3
bib
12.2 Loadng door lock
a) Press Start / Pause button to lock the loadng door for safety
purposes after startng any process.
b) The door wll not unlock f the product contans enough water to
spll out when the door s opened.
c) "Door Locked" symbol appears when the loadng door s locked.
EN / 55
Washing Machine / User’s Manual
12.2.1 Openng the loadng door n case of power falure:
NOTE
• In case of power falure, you can use the loadng door
emergency handle under the pump flter cap to open the
loadng door manually.
WARNING!
• To avod any water overflow before openng the loadng
door, make sure there s no water left nsde the machne.
a) Open the pump flter cap.
b) Release the loadng door emergency handle
located at the rear sde of the flter cap.
c) Pull down the loadng door emergency handle
once and open the loadng door. After openng
the loadng door, re-nsert the loadng door
emergency handle.
d) If the loadng door does not open, try agan by
pullng down the handle.
EN / 56
Washing Machine / User’s Manual
13. Mantenance and cleanng
13.1 Cleanng the detergent drawer
13.1.1 When to clean
a) If you see hardened, vscous detergent or softener when you open
the dosng contaner ld,
b) If you are not satsfed wth the washng results (the detergent
or softener may not be taken nto the washng medum snce t s
hardened),
c) If the lquds n the compartment do not decrease for a long tme
even though you do not add detergent or softener and dosng s
selected,
d) If you want to change the washng agents you have added to
the compartment (for example, f you are not satsfed wth the
detergent and do not want to use t) or f you have made a mstake
when addng the agents (for example, f you have added detergent
to the softener compartment or softener to the detergent
compartment),
e) If you are gong to add a detergent or softener from a dfferent
brand than the one you normally use,
f) If you are addng a washng agent of a dfferent nature (for
example, f you are addng detergent for coloured laundry when
there s detergent for whte laundry n the compartment),
g) If you are addng a washng agent wth a dfferent concentraton
(To not waste the old detergent, you can add t to the powder
detergent compartment n the next wash and select «powder
detergent actve» on the dsplay.),
h) If the new softener to be added has the same characterstcs but
has a dfferent scent (please keep n mnd that f you add the new
softener wthout cleanng the remnants of the prevous one, ths
mxture wll gve a dfferent smell),
) If you are not gong to use the product for a long tme (for example,
when gong to the summer house and when returnng - 3 months
or more) (the washng agent may ncreasngly thcken and get
hardened n the end, and thus the system may not perform dosng
even f t shows that the compartments are full.)
EN / 57
Washing Machine / User’s Manual
13.1.2. Cleanng:
Before cleanng, press the On/Off button to swtch of the product and
unplug t.
NOTE
• It s recommended for you to wear a glove to avod
contactng the detergent you wll take out of the
detergent drawer and other washng agents.
a) Press the blue part n the mddle of the detergent drawer and then
pull the drawer towards yourself to take t out.
b) Take out the dscharge bar that s located at the back of the drawer.
c) The hole behnd the detergent compartment that wll be empted s
placed over a contaner.
d) Slghtly push the dscharge bar nto the slot at the back of the
detergent compartment.
e) The detergent starts to flow to the contaner.
f) Repeat the same process for softener.
EN / 58
Washing Machine / User’s Manual
g) Use a flat screwdrver to remove the tabs holdng the upper cover of
the detergent drawer (there are 6 tabs n total: two on the rght sde
of the drawer, two on the left and two at the back) and wash the
nsde of the drawer.
h) After washng t, place the cover back to ts locaton. Make sure that
all tabs are ftted. If the tabs do not seat properly, lquds may leak
or the detergent drawer may get stuck or dffcultly move on the
drawer slde. For ths reason, please ensure that the tabs are ftted
n place.
) Ft the dscharge bar to ts slot at the back of the drawer.
j) Payng attenton to ts slot and sldes, ft the drawer back n place
and push t to close. After addng detergent and softener, t wll be
ready to be used n programmes wth dosng functon.
13.2 Cleanng the loadng door
a) After every washng make sure that no foregn substance s left n
the product.
b) If the holes on the bellow shown n the fgure s blocked, open the
holes usng a toothpck.
c) Foregn metal substances wll cause rust stans n the drum. Clean
the stans on the drum surface by usng cleanng agents for stanless
steel.
d) Never use steel wool or wre wool. These wll damage the panted,
chromated and plastc surfaces.
13.3 Cleanng the body and control panel
a) Wpe the body of the product wth soapy water or non-corrosve
mld gel detergents as necessary, and dry wth a soft cloth.
b) Use only a soft and damp cloth to clean the control panel.
EN / 59
Washing Machine / User’s Manual
13.4 Cleanng the water ntake flters
There s a flter at the end of each water ntake valve at the rear of the
product and also at the end of each water ntake hose where they are
connected to the tap. These flters prevent foregn substances and drt n
the water to enter the product. Flters should be cleaned f they are drty.
a) Close the taps.
b) Remove the nuts of the water ntake hoses
to access the flters on the water ntake
valves. Clean them wth an approprate brush.
If the flters are too drty, remove them from
ther places wth a plers and clean n ths way.
c) Take out the flters on the flat ends of the
water ntake hoses together wth the gaskets
and clean thoroughly under runnng water.
d) Replace the gaskets and flters carefully n
ther places and tghten the hose nuts by
hand.
13.5 Cleanng the pump flter
CAUTION!
• Foregn substances left n the pump flter may damage
your product or may cause nose problem.
• In regons where freezng s possble, the tap must be
closed, system hose must be removed and the water nsde
the product must be draned when the product s not n
use.
NOTE
• After each use, turn off the tap to whch the mans hose s
connected.
The flter system n your product prevents sold tems such as buttons, cons
and fabrc fbers cloggng the pump mpeller durng dranng of washng
water. Thus, the water wll be draned wthout any problem and the servce
lfe of the pump wll extend.
If the product fals to dran water nsde t, the pump flter s clogged. Flter
must be cleaned whenever t s clogged or n every 3 months. Water must be
draned off frst to clean the pump flter.
EN / 60
Washing Machine / User’s Manual
13.5.1 Cleanng drty flters
CAUTION!
• Temperature of the water nsde the product may rse up
to 90ºC. To avod the rsk of scaldng, clean the flter after
the water nsde the product has cooled down.
a) Unplug the product.
b) Open the flter cap.
c) Proceed as follows for dranng water.
- Place a large contaner n front of the flter to catch water
from the flter.
- Loosen pump flter (antclockwse) untl water starts to
flow. Fll the flowng water nto the contaner you have
placed n front of the flter. Always keep a pece of cloth
handy to absorb any splled water.
- Turn and remove the pump flter completely when water
nsde the product s completely draned.
d) Clean any resdues nsde the flter as well as fbers, f any, around
the pump mpeller regon.
e) Install the flter.
f) Close the flter cover.
EN / 61
Washing Machine / User’s Manual
14. Troubleshootng
Problem Cause Soluton
Programs do not
start after the
loading door is
closed.
Start / Pause / Cancel button s
not pressed.
•
Press Start / Pause / Cancel button.
It may be dffcult to close
the loadng door n case of
excessve loadng.
•
Reduce the amount of laundry and make
sure that the loadng door s closed
properly.
Programme cannot
be started or
selected.
The product has swtched to
self protecton mode due to a
supply problem (lne voltage,
water pressure, etc.).
•
The programme s cancelled when the
product s turned off and on agan. Press
and hold On / Off button for 3 seconds.
Water inside the
product.
Some water has remaned n
the product due to the qualty
control processes n the
producton.
•
Ths s not a falure; water s not harmful
to the product.
The product does
not take water in.
Tap s turned off. •
Turn on the taps.
Water nlet hose s bent. •
Flatten the hose.
Water nlet flter s clogged. •
Clean the flter.
Loadng door s not closed. •
Close the door.
The product does
not drain water.
Water dran hose s clogged or
twsted.
•
Clean or flatten the hose.
Pump flter s clogged. •
Clean the pump flter.
Product vibrates or
makes noise.
Product s standng
unbalanced.
•
Stable the product by adjustng the feet.
A hard substance has entered
nto the pump flter.
•
Clean the pump flter.
Transportaton safety bolts are
not removed.
•
Remove the transportaton safety bolts.
Laundry quantty n the
product s too lttle.
•
Add more laundry to the product.
Excessve laundry s loaded n
the product.
•
Take out some of the laundry from the
product or dstrbute the load by hand to
balance t homogeneously n the product.
Product s leanng on a rgd
tem.
•
Make sure that the product s not leanng
on anythng.
There is water
leaking from the
bottom of the
product.
Water dran hose s clogged or
twsted.
•
Clean or flatten the hose.
Pump flter s clogged. •
Clean the pump flter.
Product stopped
shortly after the
programme started.
Machne has stopped
temporarly due to low voltage.
•
Product wll resume runnng when the
voltage restores to the normal level.
Product directly
drains the water it
takes in.
Dranng hose s not at
adequate heght.
•
Connect the water dranng hose as
descrbed n the user manual.
EN / 62
Washing Machine / User’s Manual
Problem Cause Soluton
No water can be
seen in the product
during washing.
Water s nsde the nvsble
part of the product.
•
Ths s not a falure.
Loading door cannot
be opened.
Loadng door lock s actvated
because of the water level n
the product.
•
Dran the water by runnng the Pump or
Spn programme.
Product s heatng up the
water or t s at the spnnng
cycle.
•
Wat untl the programme completes.
Loadng door may be stuck
because of the pressure t s
subjected to.
•
Grab the handle and push and pull the
loadng door to release and open t.
If there s no power, loadng
door of the product wll not
open.
•
To open the loadng door, open the pump
flter cap and pull down the emergency
handle postoned at the rear sde of the
sad cap. See “Openng the loadng door n
case of power falure”
Washing takes
longer than
specified in the user
manual.(*)
Water pressure s low. •
Product wats untl takng n adequate
amount of water to prevent poor
washng qualty due to the decreased
amount of water. Therefore, the washng
tme extends.
Voltage s low. •
Washng tme s prolonged to avod poor
washng results when the supply voltage
s low.
Input temperature of water
s low.
•
Requred tme to heat up the water
extends n cold seasons. Also, washng
tme can be lengthened to avod poor
washng results.
Number of rnses and/or
amount of rnse water have
ncreased.
•
Product ncreases the amount of rnse
water when good rnsng s needed and
adds an extra rnsng step f necessary.
Excessve foam has occurred
and automatc foam
absorpton system has been
actvated due to too much
detergent usage.
•
Use recommended amount of detergent.
Programme
time does not
countdown. (On
models with display)
(*)
Tmer may stop durng water
ntake.
•
Tmer ndcator wll not countdown untl
the product takes n adequate amount of
water. The product wll wat untl there s
suffcent amount of water to avod poor
washng results due to lack of water.
Tmer ndcator wll resume countdown
after ths.
Tmer may stop durng heatng
step.
•
Tmer ndcator wll not countdown
untl the product reaches the selected
temperature.
Tmer may stop durng
spnnng step.
•
Automatc unbalanced load detecton
system s actvated due to the
unbalanced dstrbuton of the laundry n
the product.
EN / 63
Washing Machine / User’s Manual
Problem Cause Soluton
Programme
time does not
countdown. (*)
There s unbalanced load n the
product.
•
Automatc unbalanced load detecton
system s actvated due to the
unbalanced dstrbuton of the laundry n
the product.
Product does not
switch to spinning
step. (*)
There s unbalanced load n the
product.
•
Automatc unbalanced load detecton
system s actvated due to the
unbalanced dstrbuton of the laundry n
the product.
The product wll not spn
f water s not draned
completely.
•
Check the flter and the dranng hose.
Excessve foam has occurred
and automatc foam
absorpton system has been
actvated due to too much
detergent usage.
•
Use recommended amount of detergent.
Washing
performance is poor:
Laundry turns gray.
(**)
Insuffcent amount of
detergent has been used over
a long perod of tme.
•
Use the recommended amount of
detergent approprate for water
hardness and the laundry.
Washng has been made at low
temperatures for a long tme.
•
Select the proper temperature for the
laundry to be washed.
Insuffcent amount of
detergent s used wth hard
water.
•
Usng nsuffcent amount of detergent
wth hard water causes the sol to
stck on the cloth and ths turns the
cloth nto gray n tme. It s dffcult to
elmnate grayng once t happens. Use
the recommended amount of detergent
approprate for water hardness and the
laundry.
Excessve amount of
detergent s used.
•
Use the recommended amount of
detergent approprate for water
hardness and the laundry.
Washing
performance is poor:
Stains persist or
the laundry is not
whitened. (**)
Insuffcent amount of
detergent s used.
•
Use the recommended amount of
detergent approprate for water
hardness and the laundry.
Excessve laundry s loaded n. •
Do not load the product n excess. Load
wth amounts recommended n the "9.3
Programme and consumpton table".
Wrong programme and
temperature were selected.
•
Select the proper programme and
temperature for the laundry to be
washed.
Wrong type of detergent s
used.
•
Use orgnal detergent approprate for
the product.
Excessve amount of
detergent s used.
•
Put the detergent n the correct
compartment. Do not mx the bleachng
agent and the detergent wth each other.
Washing
performance is poor:
Oily stains appeared
on the laundry. (**)
Regular drum cleanng s not
appled.
•
Clean the drum regularly.
EN / 64
Washing Machine / User’s Manual
Problem Cause Soluton
Washing
performance is
poor: Clothes smell
unpleasantly. (**)
Odours and bactera layers
are formed on the drum as a
result of contnuous washng
at lower temperatures and/or
n short programmes.
•
Leave the detergent drawer as well
as the loadng door of the product ajar
after each washng. Thus, a humd
envronment favorable for bactera
cannot occur n the machne.
Colour of the clothes
faded. (**)
Excessve laundry was loaded
n.
•
Do not load the product n excess.
Detergent n use s damp. •
Keep detergents closed n an
envronment free of humdty and do not
expose them to excessve temperatures.
A hgher temperature was
selected.
•
Select the proper programme and
temperature accordng to the type and
solng degree of the laundry.
Washing machine
does not rinse well.
The amount, brand and
storage condtons of
the detergent used are
napproprate.
•
Use a detergent approprate for the
washng machne and your laundry. Keep
detergents closed n an envronment free
of humdty and do not expose them to
excessve temperatures.
Detergent was put n the
wrong compartment.
•
Add the detergent and the softener to
the rght compartment.
Pump flter s clogged. •
Check the flter.
Dran hose s folded. •
Check the dran hose.
Laundry became
stiff after washing.
(**)
Insuffcent amount of
detergent s used.
•
Usng nsuffcent amount of detergent
for the water hardness can cause the
laundry to become stff n tme. Use
approprate amount of detergent
accordng to the water hardness.
Detergent was put n the
wrong compartment.
•
Add the detergent and the softener to
the rght compartment.
Detergent was mxed wth the
softener.
•
Do not mx the softener wth detergent.
Wash and clean the drawer wth hot
water.
Laundry does
not smell like the
softener. (**)
Detergent was put n the
wrong compartment.
•
Add the detergent and the softener to
the rght compartment.
Detergent was mxed wth the
softener.
•
Do not mx the softener wth detergent.
Wash and clean the drawer wth hot
water.
Softener dosng settng level
s low.
•
Increase the softener dosng amount by
one level. See “Auto Dosng Settng”
EN / 65
Washing Machine / User’s Manual
Problem Cause Soluton
Detergent residue
in the detergent
drawer. (**)
Detergent was put n wet
drawer.
•
Dry the detergent drawer before puttng
n detergent.
Detergent has gotten damp. •
Keep detergents closed n an
envronment free of humdty and do not
expose them to excessve temperatures.
Water pressure s low. •
Check the water pressure.
The detergent n the man
wash compartment got wet
whle takng n the prewash
water. Holes of the detergent
compartment are blocked.
•
Check the holes and clean f they are
clogged.
There s a problem wth the
detergent drawer valves.
•
Call the Authorsed Servce Agent.
Detergent was mxed wth the
softener.
•
Do not mx the softener wth detergent.
Wash and clean the drawer wth hot
water.
Regular drum cleanng s not
appled.
•
Clean the drum regularly.
Too much foam
forms inside the
product. (**)
Improper detergents for the
washng machne s used.
•
Use detergents approprate for the
washng machne.
Excessve amount of
detergent s used.
•
Use only suffcent amount of detergent.
Detergent was stored under
mproper condtons.
•
Store detergent n a closed and dry
locaton. Do not store n excessvely hot
places.
Some meshed laundry such
as tulle may foam too much
because of ther texture.
•
Use smaller amounts of detergent for
ths type of tem.
Detergent was put n the
wrong compartment.
•
Put the detergent n the correct
compartment.
Foam is overflowing
from the detergent
drawer.
Too much detergent s used. •
Mx 1 tablespoonful softener and ½
l water and pour nto the man wash
compartment of the detergent drawer.
•
Put detergent nto the product sutable
for the programmes and maxmum loads
ndcated n the “Programme table”.
When you use addtonal chemcals (stan
removers, bleaches and etc), reduce the
amount of detergent.
EN / 66
Washing Machine / User’s Manual
Problem Cause Soluton
Laundry remains
wet at the end of
the programme. (*)
Excessve foam has occurred
and automatc foam
absorpton system has been
actvated due to too much
detergent usage.
•
Use recommended amount of detergent.
(*) The product does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the product and to its surrounding
environment. Laundry should be rearranged and re-spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly.
CAUTION!
• If you cannot elmnate the problem although you follow
the nstructons n ths secton, consult your dealer
or the Authorzed Servce Agent. Never try to repar a
nonfunctonal product yourself.
www.beko.com