Beko WY104PB44TW User Manual
Displayed below is the user manual for WY104PB44TW by Beko which is a product in the Washing Machines category. This manual has pages.
Related Manuals
2820526361_EN/ 26-07-18.(11:18)
Washing Machine
User Manual
WY104PB44TW
EN
Document Number=
Please read these instructions first before using your appliance!
Dear Customer,
Thank you for choosng a Beko applance.
Please take some tme to read ths user manual before usng your applance, to ensure you
know how to safely operate the controls and functons.
Carefully follow all unpackng and nstallaton nstructons to ensure the applance s correctly
connected and ftted pror to use.
Please wrte your product model and seral number on the last page of ths user manual, and
store n a safe locaton close to the applance for easy future reference.
Ths user manual may also be applcable for several other models. Dfferences between
models wll be lsted.
If you have any questons or concerns, please call our contact centre or fnd help and
nformaton onlne at www.beko.co.uk.com.
Explanaton of symbols
DANGER!
• A hazard wth a hgh level of rsk whch, f not avoded, wll result n
death or serous njury.
WARNING!
• A hazard wth a medum level of rsk whch, f not avoded, wll result
n death or serous njury.
CAUTION!
• A hazard wth a low level of rsk whch, f not avoded, wll result n
small or medum njury.
NOTE
Useful nformaton or hnts about usage.
Do not dspose of the packagng materals together wth domestc or other wastes. Take
them to the packagng materal collecton ponts desgnated by the local authortes.
This product was manufactured using the latest technology in environmentally friendly conditions.
EN / 3
Washing Machine / User’s Manual
CONTENTS
1. General safety nstructons 5
1.1 Chldren's safety ...........................................................................................................................5
1.2 Product Safety ..............................................................................................................................5
1.3 Electrcal safety............................................................................................................................ 8
1.4 Hot surface safety ...................................................................................................................... 8
1.5 Other ................................................................................................................................................ 8
2. Instructons for envronmental protecton 11
2.1 Complance wth WEEE Drectve ........................................................................................11
2.2 Dsposng of the waste product ..........................................................................................11
2.3 Package nformaton ................................................................................................................11
3. Intended use 12
2.4 What you can do for energy savng .................................................................................. 12
4. Your product 13
4.1 Overvew.......................................................................................................................................13
4.2 Package contents .....................................................................................................................14
4.3 Control panel .............................................................................................................................. 15
4.4 Screenshot .................................................................................................................................16
5.Techncal specfcatons 17
6. Installaton 18
6.1 Approprate nstallaton locaton .......................................................................................18
6.2 Removng packagng renforcement ................................................................................19
6.3 Removng transportaton safety bolts ............................................................................19
6.4 Connectng water supply ......................................................................................................20
6.5 Connectng the water dranng hose to the dran ...................................................... 21
6.6 Adjustng the feet .................................................................................................................... 22
6.7 Electrcal connecton ............................................................................................................... 23
6.8 Electrcal requrements ....................................................................................................... 24
6.9 Fttng a dfferent plug...........................................................................................................25
6.10 Transportaton of the product .........................................................................................25
7. Intal use 26
7.1 Drum cleanng .............................................................................................................................26
8. Preparng to wash 27
8.1 Sortng the laundry ..................................................................................................................27
8.2 Preparng laundry for washng .......................................................................................... 28
8.3 Loadng and removng the laundry .................................................................................. 28
8.4 Correct load capacty ..............................................................................................................29
8.5 Usng detergent ........................................................................................................................29
8.5.1 Detergent drawer ................................................................................................................................. 29
8.5.2 Detergent, softener and other cleaning agents .....................................................................30
8.5.3 Choosing the detergent type..........................................................................................................30
EN / 4
Washing Machine / User’s Manual
8.5.4 Adjusting detergent amount .......................................................................................................... 30
8.5.5 Using liquid or gel detergent ............................................................................................................31
8.5.6 Using tablet and capsule liquid detergents ...............................................................................31
8.5.7 Using softeners .....................................................................................................................................31
8.5.8 Using starch ............................................................................................................................................31
8.5.9 Using limescale remover ................................................................................................................... 32
8.5.10 Using bleaches ................................................................................................................................... 32
9. Programmes and auxlary functons 33
9.1 Programme selecton ..............................................................................................................33
9.2 Programmes .............................................................................................................................. 34
9.3 Programme table ..................................................................................................................... 40
9.4 Auxlary functon selecton ................................................................................................ 42
9.4.1 Auxiliary functions ..............................................................................................................................43
9.4.2 "Functions/Programmes Selected by Pressing the Function Buttons for 3
Seconds" ...................................................................................................................................................44
10. Programme settng 46
10.1 Temperature selecton ....................................................................................................... 46
10.2 Spn speed selecton ............................................................................................................ 46
10.3 Quck Wash Settng (Fast+) ...............................................................................................47
10.4 Startng the programme .................................................................................................... 48
10.5 Programme steps .................................................................................................................. 48
10.6 End of programme ................................................................................................................ 49
11. Programme optons 50
11.1 Settng the end tme ..............................................................................................................50
11.1.1 Cancelling the end time setting ..................................................................................................... 51
11.2 Swtchng the machne to standby mode and addng laundry ............................ 51
11.3 Cancellng the programme ..................................................................................................52
12. Addtonal features 53
12.1 Actvatng and deactvatng the audo warnng ........................................................53
12.2 Loadng door lock ...................................................................................................................53
12.2.1 Opening the loading door in case of power failure: ............................................................. 53
12.3 Drum Illumnaton ...................................................................................................................54
13. Mantenance and cleanng 55
13.1 Cleanng the detergent drawer ........................................................................................55
13.2 Cleanng the loadng door ................................................................................................... 55
13.3 Cleanng the body and control panel .............................................................................55
13.4 Cleanng the water ntake flters .....................................................................................56
13.5 Cleanng the pump flter ......................................................................................................56
13.5.1 Cleaning dirty filters ...........................................................................................................................57
14. Troubleshootng 58
EN / 5
Washing Machine / User’s Manual
1. General safety nstructons
1.1 Chldren's safety
• Chldren under the age of 3 should be kept
away unless contnuously supervsed.
•Ths product can be used by chldren at and
above 8 years old and by persons whose
physcal, sensory or mental capabltes were
not fully developed or who lack experence and
knowledge provded that they are supervsed
or traned on the safe usage of the product and
the rsks t brngs out.
• Chldren under the age of 8 should be prevented
from accessng and tnkerng wth the product.
• Cleanng and user mantenance works should
not be performed by chldren unless they are
supervsed by someone.
• Electrcal products are dangerous for the chldren.
• Use chld lock to prevent chldren from ntervenng
wth the product.
• Do not forget to close the loadng door when
leavng the room where the product s located.
• Packagng materals are dangerous to chldren.
WARNING!
1.2 Product Safety
• Unplug the product when t s not n use.
• Always have the nstallaton and reparng
procedures carred out by the Authorsed
Servce Agent.
WARNING!
EN / 6
Washing Machine / User’s Manual
• Do not force open the locked loadng door. The
door wll open mmedately after the washng
cycle has ended. If the door does not open,
apply the solutons provded for "Loadng door
cannot be opened." error n the Troubleshootng
secton. In case of forcng the loadng door to
open, the door and the lock mechansm may
get damaged.
• Never open the loadng door or remove the
flter whle there s stll water n the drum.
Otherwse, rsk of floodng and njury from hot
water wll occur.
• The water supply and dranng hoses must be
securely fastened and reman undamaged.
• Laundry that s prevously washed, cleaned,
soled or staned wth petrol / gasolne, dry
cleanng solvents or other flammable or
explosve substances must not be dred n
the machne as they gve out flammable or
explosve steam. For ths reason, they must
not be used n the Refresh programme or n
the Wash&Wear auxlary functon selecton. It
may cause fre rsk.
• Laundry staned wth Lqud cookng ol, acetone,
alcohol, petrol, kerosene, spot removers,
turpentne, waxes and wax removers must be
washed n hot water wth plenty of detergent
beforehand. After the washng programme, t
can be used n the Refresh programme or n
the Wash&Wear auxlary functon selecton.
EN / 7
Washing Machine / User’s Manual
• Foam rubber (latex foam), shower caps,
waterproof textles, clothes or pllows wth
rubber support or rubber foam pads must not be
used n the Wash&Wear auxlary programme
selecton or n the Refresh programme. It may
cause fre rsk.
• If you use washng ball, detergent scale, laundry
clothng cages and balls n your machne, they
can melt durng dryng. Do not use t n the
Refresh programme or n the Wash&Wear
auxlary functon selecton. It may cause fre
rsk.
• If you are usng ndustral chemcals for
cleanng, never use the Refresh programme or
the Wash&Wear auxlary programme. It may
cause fre rsk.
• In falures that cannot be repared usng
nformaton gven n safety nstructons, turn
off the machne, unplug the power cable and
call the Authorsed Servce Agent.
• The machne must not be used only n the
Refresh programme for a long tme. If t s
beng used only n the sad programme for a
long tme, t must be operated unloaded n one
of the short washng programmes after every
15 cycles.
• Check all clothes before loadng them nto the
machne and ensure that they do not have
objects such as lghters, cons, metal peces,
needles n the pockets or nsde.
EN / 8
Washing Machine / User’s Manual
• Underwear wth metal attachments must not
be used n the Refresh programme and the
Wash&Wear auxlary functon selecton. Metal
supports mght come off durng dryng and
cause damage n the machne.
DANGER!
1.3 Electrcal safety
• Do not operate faulty products untl repared
by an Authorsed Servce Agent.
• Do not try to reach nteror parts of the product
other than the parts stated n mantenance
nstructons.
• Never wash the product by spreadng or
pourng water onto t!
• Never touch the power cable plug wth wet
hands!
WARNING!
1.4 Hot surface safety
• The glass of the loadng door gets too hot whle
washng at hgh temperatures. Therefore,
especally do not allow chldren touch the glass
whle washng.
• Do not touch loadng door glass wth bare
hands after dryng. There s the rsk of gettng
burnt.
1.5 Other
• Do not use combustble, flammable and other
smlar chemcals for product cleanng or other
purposes.
• Do not step or stand on the product.
EN / 9
Washing Machine / User’s Manual
• Do not place heavy objects on the product.
• If you wll place a dryer on to the washng
machne, secure t wth the sutable connecton
apparatus that you can obtan from the
Authorsed Servce Agent.
• Unplug the product, turn the tap off and
contact your Authorsed Servce Agent wthout
tamperng wth the product f the product has
been damaged.
• Keep your pets away from the washng
machne.
• In the Refresh programme and the Wash&Wear
auxlary programme selecton, there s a
coolng process as the fnal step to make sure
that the laundry remans at a temperature that
wll not harm the user. You may be exposed to
hot steam f you open the door before coolng
s complete. There s the rsk of scaldng.
• If the programme s nterrupted (programme
cancellaton or power falure) durng the
Refresh programme or the Wash&Wear
auxlary functon selecton, the laundry n the
machne may be hot. Be careful.
• Durng the Refresh programme or the
Wash&Wear auxlary programme selecton,
do not stop the machne before these steps
are complete. If you have to stop the machne,
remove all laundry and lay them n a sutable
place to let them cool down.
• Your product s sutable to operate n ambent
temperatures between 0OC and +35OC.
EN / 10
Washing Machine / User’s Manual
• Ambent temperatures between 15OC and
+25OC are deal temperatures for your product.
• Do not operate the Refresh programme and
the Wash&Wear programme after overloadng
the machne. Observe the maxmum load levels
specfed.
• Leather laundry and laundry that contans
leather must not be used n the Refresh
programme and the Wash&Wear auxlary
functon selecton. Leather parts gve away
colour.
• Large laundry such as tulles, rugs, blankets,
duvets etc. must not be used n the Refresh
programme and the Wash&Wear auxlary
functon selecton. Your laundry mght get
damaged.
• Do not use fabrc softeners or statc preventers
n the machne unless recommended by the
manufacturer.
• Products such as fabrc softeners must be
used n accordance wth manufacturer's
nstructons.
• Delcate laundry that contans slk, wool etc.
must not be used n the Refresh programme and
the Wash&Wear auxlary functon selecton.
Otherwse, wool clothes may get shrunken and
other senstve clothes may get damaged.
• Check symbols on the garment tag before
startng the programmes.
EN / 11
Washing Machine / User’s Manual
2. Instructons for envronmental protecton
2.1 Complance wth WEEE Drectve
Ths product does not contan harmful and forbdden materals descrbed
n the "Regulaton on the Control of the Waste Electrcal and Electronc
Equpment" ssued by T.R. Mnstry of Envronment and Urbanzaton. It
comples wth the WEEE Drectve.
2.2 Dsposng of the waste product
Ths product has been manufactured wth hgh qualty parts and materals
whch can be reused and are sutable for recyclng. Therefore, do not
dspose the product wth normal domestc waste at the end of ts servce
lfe.
Take t to a collecton pont for the recyclng of electrcal and electronc
equpment. Please consult your local authortes to learn the nearest
collecton pont. Help protect the envronment and natural resources by
recyclng used products.
For chldren's safety, cut the power cable and break the lockng mechansm
of the loadng door so that t wll be non-functonal before dsposng of the
product.
Complance wth RoHS Drectve:
The product you have purchased comples wth EU RoHS Drectve
(2011/65/EU). It does not contan harmful and prohbted materals
specfed n the Drectve.
2.3 Package nformaton
Packagng materals of the product are manufactured from recyclable
materals n accordance wth our Natonal Envronment Regulatons. Do not
dspose of the packagng materals together wth the domestc or other
wastes. Take them to the packagng materal collecton ponts desgnated
by the local authortes.
EN / 12
Washing Machine / User’s Manual
2.4 What you can do for energy savng
CAUTION!
• Comply wth the nformaton n the programme and
consumpton table secton.
- If the washng machne s overloaded, ts washng
performance wll drop.
- Moreover, nose and vbraton problems may occur.
Followng nformaton wll help you use the product n an ecologcal and
energy-effcent manner.
a) Operate the product n the hghest load capacty allowed for
the programme you have selected, but do not overload. See,
“Programme and consumpton table”.
b) Follow the recommended temperatures n the programme and
consumpton table.
c) Wash slghtly soled laundry at low temperatures.
d) Select faster programmes for small quanttes of lghtly soled
laundry.
e) Do not use prewash and hgh temperatures for laundry that s not
heavly soled or staned.
f) If you plan to dry your laundry n a dryer, select the hghest spn
speed recommended durng washng process.
g) Do not use detergent n excess of the amount recommended on the
detergent package.
3. Intended use
a) Ths product has been desgned for domestc use.
b) It s not sutable for commercal use and t must not be used out of
ts ntended use.
c) The product must only be used for washng, rnsng and makng
ready to wear the laundry that are marked accordngly.
d) The manufacturer waves any responsblty arsen from ncorrect
usage or transportaton.
e) The servce lfe of your product s 10 years. Durng ths perod,
orgnal spare parts wll be avalable to operate the product properly.
f) Do not wash the tems such as carpets, rugs and etc. n the machne.
Permanent damage occurs n the machne.
EN / 13
Washing Machine / User’s Manual
4. Your product
4.1 Overvew
1
2
3
4
5
6
7
8
1- Power cable
2- Top panel
3- Control panel
4- Water dscharge hose
5- Loadng door
6- Flter cap
7- Adjustable feet
8- Detergent drawer
EN / 14
Washing Machine / User’s Manual
4.2 Package contents
Power cable
Water dscharge hose
Transportaton safety bolts
Mans water nlet hose
Lqud detergent contaner
User manual
Plastc plug group
NOTE
• Fgures n ths manual are schematc and may not match
the product exactly.
EN / 15
Washing Machine / User’s Manual
4.3 Control panel
1 - Programme selecton knob
2 - Spn level adjustment button
3 - Temperature level adjustment button
4 - Dsplay
5 - End Tme adjustment button
6 - Quck Wash settng button
7 - On / Off button
8 - Start / Pause button
9 - Auxlary functon button 3
10 - Auxlary functon button 2
11 - Auxlary functon button 1
12 - Programme selecton lghts
WY104PB44TW
Cottons
Synthetics
Mixed Fabrics
Spin+Drain
StainExpert
Cottons Eco
Shirts
Anti Allergy
Sports
Duvet
Rinse
On /
Woollens
Delicates
Dark Care
Daily Quick
Super Short
Child
Lock 3’’
Drum
Clean 3’’
Refresh
Anti
Crease 3’’
Start /
Pause
Prewash
Temperature
Spin Time Delay
Fast+
Extra
Rinse
Clean
& Wear
12364 5
7
8
910
11
12
EN / 16
Washing Machine / User’s Manual
4.4 Screenshot
1 2 3 4
5
6
7
8
101112
13
9
1 - Temperature ndcator
2 - Temperature symbol
3 - No water symbol
4 - Programme follow-up ndcator
5 - Quck wash ndcator
6 - Duraton nformaton
7 - Auxlary functons lght 1
8 - Auxlary functons lght 2
9 - Delayed start enabled symbol
10 - Door lock s engaged symbol
11 - Chld lock enabled symbol
12 - Auxlary functons lght 3
13 - Spn speed selecton ndcator
EN / 17
Washing Machine / User’s Manual
5.Technical specifications
Complying Commission Delegated Regulation (EU) No 1061/2010
Supplier name or trademark Beko
Model name WY104PB44TW
Rated capacity (kg) 10
Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) A+++
Annual Energy Consumption (kWh) (1) 191
Energy consumption of the standard 60°C cotton programme at full load (kWh) 0,970
Energy consumption of the standard 60°C cotton programme at partial load (kWh) 0,760
Energy consumption of the standard 40°C cotton programme at partial load (kWh) 0,740
Power consumption in ‘off-mode’ (W) 0,500
Power consumption in ‘left-on mode’ (W) 0,700
Annual Water Consumption (l) (2) 10119
Spin-drying efficiency class / Scale from A (Highest Efficiency) to G (Lowest Efficiency) B
Maximum spin speed (rpm) 1400
Remaining moisture Content (%) 53
Standard cotton programme (3) Cotton Eco 60°C and 40°C
Programme time of the standard 60°C cotton programme at full load (min) 225
Programme time of the standard 60°C cotton programme at partial load (min) 195
Programme time of the standard 40°C cotton programme at partial load (min) 195
Duration of the left-on mode (min) N/A
Airborne acoustical noise emissions washing/spinning (dB) 55/76
Built-in No
Height (cm) 84
Width (cm) 60
Depth (cm) 64
Net weight (±4 kg.) 75
Single Water inlet / Double Water inlet • / -
• Available
Electrical input (V/Hz) 230 V / 50Hz
Total current (A) 10
Total power (W) 2200
Main model code 9814
(1) Energy Consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load, and the
consumption of the low-power modes. Actual energy consumption will depend on how the appliance is used.
(2) Water consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load. Actual water
consumption will depend on how the appliance is used.
(3) “Standard 60°C cotton programme” and the “standard 40°C cotton programme” are the standard washing programmes to which the
information in the label and the fiche relates and these programmes are suitable to clean normally soiled cotton laundry and that they are the
most efficient programmes in terms of combined energy and water consumption.
Technical specifications may be changed without prior notice to improve the quality of the product.
EN / 18
Washing Machine / User’s Manual
6. Installaton
6.1 Approprate nstallaton locaton
WARNING!
• Damaged products cause rsks for your safety.
- Pror to nstallaton, vsually check f the product has any
defects on t.
- If so, do not have t nstalled.
CAUTION!
• Do not place the product on a floor wthout suffcent
capacty to carry the load.
- Otherwse, the product or the floor may be damaged.
- Total weght of the washng machne and the dryer -wth
full load- when they are placed on top of each other s
approx. 180 klograms.
• Do not nstall the product n places where there s the rsk
of freezng.
- Otherwse, your product wll be damaged and your house
wll be under rsk of flood.
NOTE
• Operate the product n a well ventlated and dust free
envronment.
• Preparaton of the locaton and electrcal, tap water and
waste water nstallatons at the place of nstallaton
s under customer's responsblty. Make sure that the
nstallaton and electrcal connectons of the product are
performed by competent persons.
• Make sure that the water nlet and dran hoses as well as
the power cable are not folded, pnched or crushed whle
pushng the product nto ts place after nstallaton or
cleanng procedures.
• Do not place heat sources such as Hobs, Irons, Ovens,
etc. on the washng machne and do not use them on the
product.
• Manufacturer shall not be held lable for damages that may
arse from procedures carred out by unauthorsed persons.
EN / 19
Washing Machine / User’s Manual
a) Place the product on a rgd, flat and level surface.
b) Never place the product on a carpet-covered floor.
c) Do not lean the product on furnture, keep a dstance of at least 1.5
cm between them.
d) Do not place the product on any platform.
6.2 Removng packagng renforcement
CAUTION!
• Seek someone's help for ths procedure.
- Rsk of gettng njured.
To remove the packagng renforcement;
a) Tlt the product backwards.
b) Remove the packagng renforcement by pullng the
rbbon.
6.3 Removng transportaton safety bolts
CAUTION!
• Remove the transportaton safety bolts before operatng
the product!
- Otherwse, the product wll be damaged.
a) Loosen all transportaton safety bolts wth an
approprate wrench untl they turn freely.
EN / 20
Washing Machine / User’s Manual
b) Remove transportaton safety bolts by turnng them
gently.
c) After removng bolts, close the holes wth plugs
provded n the user manual bag.
NOTE
• Keep the transportaton safety bolts n a safe place for
reuse when the product needs to be moved agan n the
future.
• Before movng the product, nstall the transportaton
safety bolts n reverse order of the dsassembly procedure.
6.4 Connectng water supply
CAUTION!
• The water supply pressure requred to run the product s
between 1 to 10 bars (0.1 – 1 MPa). (It s necessary to have
10 – 80 ltres of water flowng from the fully open tap per
mnute.)
- Attach a pressure reducng valve f water pressure s
hgher.
• Do not use old or used water nlet hoses on the new
product.
- It may cause stans on your laundry.
• Do not plug the product's cold water nlet to hot water
outlet.
- Your laundry may get damaged or the product wll swtch
to protecton mode and wll not operate.
EN / 21
Washing Machine / User’s Manual
a) Connect the straght end of the mans nlet hose
provded wth the product to the cold water tap and
the warped end to the water nlet on the back of the
product as shown n the fgure.
b) Tghten all hose nuts by hand securely. Never use a
tool when tghtenng the nuts.
c) Open the taps completely after makng the hose
connecton to check for water leaks at the connecton
ponts. If any leaks occur, turn off the tap and remove
the nut. Retghten the nut carefully after checkng
the seal. Turn the tap on and repeat the checks.
d) Keep the taps closed when the product s not n use.
6.5 Connectng the water dranng hose to the dran
CAUTION!
• Attach the end of the dran hose drectly to waste water
dran, washbasn or bathtub.
• Do not contact the dscharged water. Rsk of beng burnt as
the water may be hot.
• Fx the water dran hose end completely to prevent rsk of
dslocaton.
a) Connect the water dran hose to a mnmum heght of 40 cm and a
maxmum heght of 100 cm.
b) The product may fal f water dran hose s at or close to floor level
(under 40 cm) as t would take water n and out contnuously.
c) The product may fal f water dran hose s placed hgher than 100 cm
as t cannot dscharge water and water stays nsde the product.
Therefore, follow the heghts descrbed n the fgure.
EN / 22
Washing Machine / User’s Manual
40 cm
100 cm
d) To prevent the waste water to go back nto the product agan and to
ensure easy dranage, do not mmerse the end of the hose nto the
waste water or do not nsert t nto the dran for more than 15 cm. If t
s too long, cut t short.
e) The end of the hose should not be bent, t should not be stepped
on and the hose must not be pnched between the dran and the
product.
f) If the length of the hose s too short, use t by addng an orgnal
extenson hose. Total length of the hose may not be longer than 3.2
m. Otherwse, the product may fal as t would take water n and out
contnuously.
6.6 Adjustng the feet
CAUTION!
• Adjust feet so that the product wll be balanced on the
locaton t wll be used.
- Balance the machne by adjustng the feet.
- Check for any play by pressng the product from upper
dagonal edges.
- Otherwse, the product may move from ts place and
cause crushng and vbraton problems.
• Do not use any tools to loosen the lock nuts. Otherwse, the
lock nuts may get damaged.
EN / 23
Washing Machine / User’s Manual
a) Loosen the lock nuts on the feet by hand.
b) Adjust the feet untl the product stands level and balanced.
c) Tghten all lock nuts agan by hand.
6.7 Electrcal connecton
DANGER!
• Damaged power cables must be replaced by the Authorsed
Servce Agents.
a) Connect the product to a grounded outlet protected by a 16 A fuse.
NOTE
• Our company shall not be lable for any damages that
wll arse when the product s used wthout groundng n
accordance wth the local regulatons.
• If the current value of the fuse or breaker n the house s
less than 16 Amps, have a qualfed electrcan nstall a 16
Amp fuse.
• Do not make connectons va extenson cables or mult-plugs.
b) Connecton must comply wth natonal regulatons.
c) The wrng for the electrcal outlet crcut must be suffcent to meet
the applance requrements. Use of a Groud Fault Crcut Interrupter
(GFCI) s recommended.
d) Power cable plug must be wthn easy reach after nstallaton.
e) The voltage specfed n the “(5.) Techncal specfcatons" secton
must be equal to your mans voltage.
EN / 24
Washing Machine / User’s Manual
6.8 Electrcal requrements
a) Before you nsert the plug nto the wall socket make sure that the
voltage and the frequency shown n the ratng label corresponds to
your electrcty supply.
b) We recommend that ths applance be connected to the mans
supply va a sutable swtched and fused socket n a readly
accessble poston.
c) Should the mans lead of the applance become damaged or need
replacng at any tme, t must be replaced by a specal purpose made
mans lead whch can only be obtaned from an Authorsed Servce
Agent.
WARNING!
• Ths applance must be earthed .
CAUTION!
• If the ftted moulded plug s not sutable for your socket,
then the plug should be cut off and an approprate plug
ftted.
- Balance the machne by adjustng the feet.
- Check for any play by pressng the product from upper
dagonal edges.
- Otherwse, the product may move from ts place and
cause crushng and vbraton problems.
• Destroy the old plug, a cut off plug wth a bare cord could
cause a shock hazard f nserted nto a socket elsewhere n
the house.
• The moulded plug on ths applance ncorporates a 13A
fuse. Should the fuse need to be replaced an ASTA
approved BS1362 fuse of the same ratng must be used.
- Do not forget to reft the fuse cover. In the event of
losng the fuse cover, the plug must not be used untl a
replacement fuse cover has been ftted.
- Colour of the replacement fuse cover must be the same
colour as that vsble on the pn face of the plug.
- Fuse covers are avalable from any good electrcal store.
EN / 25
Washing Machine / User’s Manual
6.9 Fttng a dfferent plug
As the colours of the wres n the mans lead of
ths applance may not correspond wth the
coloured markngs dentfyng the termnals on
your plug, proceed as follows:
a) Connect the green - yellow or green (earth) wre to the
termnal n the plug marked ‘E’ or wth the symbol or
coloured green and yellow or green.
b) Connect the blue (neutral) wre to the termnal n the
plug marked ‘N’ or coloured black.
c) Connect the brown (lve) wre to the termnal n the
plug marked ‘L’ or coloured red.
Wth the alternatve plugs a 13A fuse must be
ftted ether n the plug or adaptor or n the
man fuse box. If n doubt contact a qualfed
electrcan.
6.10 Transportaton of the product
a) Unplug the product before transportng t.
b) Remove water dran and water supply connectons.
c) Dran all water that has remaned n the product.
d) Install transportaton safety bolts n the reverse order of removal
procedure.
NOTE
• Never move the product wthout the transportaton safety
bolts properly fxed n place!
WARNING!
• Packagng materals are dangerous to chldren. Keep
packagng materals n a safe place away from reach of the
chldren.
EN / 26
Washing Machine / User’s Manual
7. Intal use
7.1 Drum cleanng
NOTE
• Apply drum cleanng wthout any laundry n the product.
a) Use the Drum Cleanng programme.
b) Set the temperature to the level recommended on the specal drum
cleanng agent package whch can be provded from Authorsed
Servce Agents.
c) Before startng the programme, put 1 pouch of specal drum cleanng
agent (f the specal agent could not be suppled, put max. 1 teaspoon
of (max. 100 g) of powder ant-lmescale) nto the man wash
detergent compartment. If the ant-lmescale s n tablet form, put
only one tablet nto the man wash compartment.
d) Start the programme.
e) Dry the nsde of the bellow wth a clean pece of cloth after the
programme has come to an end.
NOTE
• Repeat Drum Cleanng every 2 months.
EN / 27
Washing Machine / User’s Manual
8. Preparng to wash
8.1 Sortng the laundry
a) Sort laundry accordng to type of fabrc, colour, and degree of solng
and allowable water temperature.
a) Follow nstructons on the garment tags.
a) Do not wash colours and whtes together. New and dark coloured
cottons may release a lot of dye.
LAUNDRY WASH SYMBOLS
Symbols for
washing on
machine
Normal wash
No Iron
Sensitive-
Delicate
wash
Hand wash
Not washable
No Spin
WASH Water
temperatures
Maximum 950C700C600C500C400C300C
Symbol(s)
Drying
symbols Suitable for
dryer No ironing Sensitive /
delicate dry
Do not dry
with dryer
Do not dry Do not
dry-
clean
DRYING
Drying settings
At any temperature
At high temperature
At medium
temperature
At low temperature
Without heating
Hang to dry
Lay to dry
Hang wet to dry
Lay in shadow
to dry
Dry-cleanable
Iron
IRON Dry or steam
Iron at high
temperature
Iron at medium
temperature
Iron at low
temperature
No ironing
Iron without
steam
Maximum temperature 200 0C150 0C110 0C
All bleaches are allowed
Bleach (sodium
hypochlorite)
can be used
Bleach is not
allowed
Only bleaches without
chlorine are allowed
BLEACH
EN / 28
Washing Machine / User’s Manual
8.2 Preparng laundry for washng
a) Laundry tems wth metal attachments such as, underwrng, belt
buckles or metal buttons wll damage the product. Remove the
metal peces or wash such clothes by puttng them n a laundry bag
or pllow case. Ths knd of clothes may overheat n the Refresh
programme and n the Wash&Wear auxlary functon selecton
and harm your laundry. For ths reason, do not ths knd of laundry
n the Refresh programme or n the Wash&Wear auxlary functon
selecton.
b) Take out all substances n the pockets such as cons, pens and paper
clps, and turn pockets nsde out before washng.
c) Put small sze clothes such as nfant socks and nylon stockngs n a
laundry bag or a pllow case.
d) Place curtans n wthout compressng them. Remove curtan
attachment tems. Do not use tulles or curtans n the Refresh
programme or n the Wash&Wear auxlary functon selecton.
e) Wash “machne washable” or “hand washable” labeled products only
wth an approprate programme. Hang them or lay them to dry. Do
not use them n the Wash&Wear auxlary programme selecton.
f) If you plan to select the Wash&Wear auxlary functon, select the
hghest spn speed recommended durng washng process.
g) Close zpper and fasten the buttons.
h) Wash products wth hand-washable or other tags only wth an
approprate programme.
) Tough stans must be treated properly before washng.
j) Wash trousers and delcate laundry turned nsde out.
k) Laundry that are subjected to materals such as flour, lme dust, mlk
powder, etc. ntensely must be shaken off before placng nto the
product.
8.3 Loadng and removng the laundry
a) Open the loadng door.
b) Do not pack laundry nsde the product tghtly.
c) Push the loadng door to close untl you hear a lockng sound.
d) Ensure that no tems are caught n the door. Loadng door wll be
locked after the programme has started.
e) The door lock wll open mmedately after the washng programme
has ended. Then you can open the loadng door. If the door does
not open, apply the solutons provded for "Loadng door cannot be
opened." error n the Troubleshootng secton.
EN / 29
Washing Machine / User’s Manual
8.4 Correct load capacty
a) The maxmum load capacty depends on the type of laundry, the
degree of solng and the desred washng programme.
b) The product automatcally adjusts the water amount accordng to
the weght of the laundry put nsde t.
WARNING!
• Comply wth the nformaton n “9.3 Programme table”.
When overloaded, product's washng performance wll
drop. Moreover, nose and vbraton problems may occur.
Laundry
type Weght (g) Laundry type Weght (g)
Bathrobe 1200 Hand towel 100
Fabric napkin 100 Women night
gown 200
Duvet cover 700 Underclothing 100
Bed sheet 500 Men’s overalls 600
Pillowcase 200 Men’s shirt 200
Tablecloth 250 Men’s pajamas 500
Towel 200 Blouses 100
8.5 Usng detergent
8.5.1 Detergent drawer
1
3
2
EN / 30
Washing Machine / User’s Manual
The detergent drawer s composed of three compartments:
– (1) for prewash
– (2) for man wash
– (3) for softener
– ( ) n addton, there s a sphon pece n the softener compartment.
8.5.2 Detergent, softener and other cleanng agents
a) Add detergent and softener before startng the washng
programme.
b) When usng a programme wthout prewash, do not put any
detergent nto the prewash compartment.
c) Do not select a programme wth prewash f you are usng a
detergent bag or dspensng ball. Place the detergent bag or the
dspensng ball drectly among the laundry n the product.
d) Never leave the detergent drawer open whle the washng
programme s runnng!
8.5.3 Choosng the detergent type
CAUTION!
• Do not use soap powder.
• Use only detergents manufactured specfcally for washng
machnes.
NOTE
• Detergent type to be used depends on the fabrc type and
color.
a) Use dfferent detergents for coloured and whte laundry.
b) Wash your delcate clothes only wth specal detergents (lqud
detergent, wool shampoo, etc.) used solely for delcate clothes.
c) When washng dark coloured clothes and qults, t s recommended
to use lqud detergent.
d) Wash woolens wth a specal detergent made specfcally for
woolens.
8.5.4 Adjustng detergent amount
a) The amount of washng detergent to be used depends on the
amount of laundry, the degree of solng and water hardness.
b) Do not use amounts exceedng the dosage quanttes recommended
on the detergent package to avod excessve foam and poor rnsng.
c) Use lesser detergent for small amounts or lghtly soled clothes.
EN / 31
Washing Machine / User’s Manual
8.5.5 Usng lqud or gel detergent
a) Do not forget to place the lqud detergent cup nto the man wash
compartment.
b) If the lqud detergent has lost ts fludty, dlute t wth water before
puttng n the detergent cup.
b) When usng gel detergent, fll the detergent nto ths cup before
startng the programme.
2
2
8.5.6 Usng tablet and capsule lqud detergents
a) If tablet s a capsule wth lqud detergent, put t drectly nto the
drum before washng.
b) Put tablet detergents nto the man wash compartment or drectly
nto the drum before washng.
8.5.7 Usng softeners
a) Pour the softener nto the softener compartment of the detergent
drawer.
b) Do not exceed the (>max<) level markng n the softener
compartment.
c) If the softener has lost ts fludty, dlute t wth water before addng
t n the detergent compartment.
WARNING!
• Do not use lqud detergents or other cleanng products
other than fabrc softeners produced for washng
machnes to soften the clothes.
8.5.8 Usng starch
a) Place lqud or dust starch on softener compartment and start the
rnsng programme.
b) Do not use softener and starch together.
c) Use drum cleanng descrbed n Intal use secton after usng starch.
EN / 32
Washing Machine / User’s Manual
8.5.9 Usng lmescale remover
a) When requred, use lmescale removers manufactured specfcally
for washng machnes only.
8.5.10 Usng bleaches
a) Choose a programme wth prewash. Put bleach n prewash
compartment whle the product s takng water n at the start of
prewash.
b) Do not use bleachng agent and detergent by mxng them.
c) Use just a lttle amount (50 ml) of bleachng agent and rnse the
clothes very well as t causes skn rrtaton.
d) Do not pour the bleach onto the laundry.
e) Do not use t wth the colored tems.
f) When usng oxygen based bleaches, select a programme that
washes at a lower temperature.
g) Oxygen-based bleach can be used together wth the detergent.
EN / 33
Washing Machine / User’s Manual
9. Programmes and auxlary functons
9.1 Programme selecton
NOTE
• Programmes are lmted wth the hghest spn speed
approprate for that partcular type of fabrc.
• When selectng a programme, always consder the type
of fabrc, colour, degree of solng and permssble water
temperature.
• Always select the relevant lowest requred temperature.
Hgher temperature means hgher electrcty consumpton.
a) Select the desred programme wth the Programme Selecton knob.
NOTE
• If no programme s started or no key s pressed wthn 10
mnute durng programme selecton process, the product
wll turn off automatcally. Dsplay and all ndcators wll
turn off.
• If you press on the On / Off button, the programme
nformaton set as default wll be dsplayed.
EN / 34
Washing Machine / User’s Manual
9.2 Programmes
NOTE
• You can see laundry type and washng suggestons on
clothng tags.
• Cottons Eco
Use to wash your normally soled, durable cotton and lnen laundry.
Although t washes longer than all other programmes, t provdes hgh
energy and water savngs. Actual water temperature may be dfferent from
the stated wash temperature. When you load the machne wth less laundry
(e.g. ½ capacty or less), perods n programme stages may automatcally
get shorter. In ths case, energy and water consumpton wll decrease more,
provdng a more economc wash.
NOTE
• Actual water temperature may be dfferent from the
stated wash temperature.
• Cottons
You can wash your durable cotton laundry (sheets, bedlnen, towels,
bathrobes, underwear etc.) n ths programme.
When "Quck Wash" button s pressed, effcent washng performance wll
be delvered thanks to the ntense washng movement even though the
programme duraton wll be sgnfcantly shorter. When "Quck Wash" button
s not pressed, superor washng and rnsng performance wll be delvered
for your heavly soled laundry.
• Synthetcs
You can wash your synthetc laundry (such as shrts, blouses,
synthetc/cotton blended fabrcs etc.) n ths programme.
When "Quck Wash" button s pressed, the programme
duraton wll be sgnfcantly shorter and the washng
performance wll be hgh. When "Quck Wash" button s not
pressed, superor washng and rnsng performance wll be
delvered for your soled laundry.
EN / 35
Washing Machine / User’s Manual
• Woollens
Use to wash your woolen/delcate laundry. Select the approprate
temperature complyng wth the tag of your clothes. Your laundry wll
be washed wth a very gentle washng acton n order not to damage the
clothes.
Select ths programme to wash delcate curtans of max. 2 kg. Wash wth
stan removers or powder detergent f you want whter curtans.
Woolens programme of ths machne s approved by The Woolmark
Company for washng machne-washable woolen products provded that
the products are washed n accordance wth the nstructons on the product
tag and the nstructons publshed by the manufacturer of ths machne.
M1352
In the UK, Ireland, Hong Kong and Inda, the Woolmark trademark s a
Certfcaton trademark.
• Ant Allergy
Use ths programme for your laundry (baby clothes, bed sheets, bedlnen,
underwear, etc. cotton tems) for whch you requre an ant-allergc and
hygenc washng at hgh temperature wth ntensve and long washng
cycle. The hgh level of hygene s ensured thanks to long heatng duraton
and addtonal rnsng step.
• Programme was tested by the “VDE” nsttute wth the 20°C
temperature opton selected and t was certfed n terms of ts effcacy n
elmnatng bactera and mould.
• Programme was tested by “The Brtsh Allergy Foundaton”
(Allergy UK) wth the 60°C temperature opton selected and t was certfed
n terms of ts effcacy n elmnatng allergens n addton to bactera and
mould.
Allergy UK s the brand of the Brtsh Allergy Assocaton. Seal of Approval
s created to gude people that requre recommendaton about a product
that the related product restrcts / reduces / elmnates the allergens or
reduces the allergen content sgnfcantly n the ambent where allergy
patents exst. It ams to provde assurance that the products are tested
scentfcally or examned n a way to provde measurable results.
• Dark Care
Use ths programme to protect the colour of your dark-coloured garments or
jeans. It performs hgh performance washng wth specal drum movement
even f the temperature s low. It s recommended to use lqud detergent
or woolen shampoo for dark coloured laundry. Do not wash your delcate
clothes contanng wool or etc.
EN / 36
Washing Machine / User’s Manual
• Sports
You can use ths programme to wash sports and outdoors garments that
contan cotton/synthetcs mx and water repellent covers such as gore-
tex etc. It makes sure your garments are washed gently thanks to specal
rotatng movements.
• Spn+Dran
Use to dran the water n the product.
• Rnse
Use when you want to rnse or starch separately.
• Shrts
Ths programme s used to wash the shrts made from cotton, synthetc
and synthetc blended fabrcs altogether. It reduces wrnkles. When "Quck
Wash" settng button s pressed, the Pre-treatment algorthm s executed.
• Apply the pre-treatment chemcal on your garments drectly
or add t together wth detergent when the machne starts to take water
from the man washng compartment. Thus, you can obtan the same
performance as you obtan wth normal washng n a much shorter perod of
tme. Usage lfe of your shrts ncreases.
• Mxed Fabrcs
Use to wash your cotton and synthetc clothes together wthout sortng
them.
• Delcates
You can wash your delcate clothes such as cotton/synthetc blended
kntwear or hosery n ths programme. It washes wth more delcate
washng acton. Wash your clothes whose colour you want to preserve
ether at 20 degrees or by selectng the cold wash opton.
EN / 37
Washing Machine / User’s Manual
• Refresh
Use ths programme to remove the odour on the laundry that have been
worn only once and do not contan any stans. Laundry s refreshed wth
warm ar.
• Daly Quck / Super Short
Use ths programme to wash your lghtly soled and unspotted cotton
clothes n a short tme. When the "Quck Wash" settng button s pressed,
programme duraton can drop to 14 mnutes. 2 (two) kg of laundry must be
washed maxmum.
• StanExpert
The machne has a specal stan programme whch enables the removal of
dfferent types of stans n the most effectve way. Use ths programme only
for durable colourfast cotton laundry. Do not wash delcate and pgmentng
clothes and laundry n ths programme. Before washng, garment tags should
be checked (recommended for cotton shrts, trousers, shorts, t-shrts, baby
clothes, pyjamas, aprons, table clothes, bed sheets, duvet covers, pllowcases,
bath-beach towels, towels, socks, cotton underwear that are sutable for
washng at hgh temperature and long tme). You can perform washng for 24
types of stan dvded nto 3 dfferent groups that can be selected wth the
"Quck Wash" settng button. Below you can see the stan groups that can be
selected usng the "Quck Wash" settng button. Dependng on the selected
stan group, a specal washng programme for whch duraton of rnse hold,
washng acton, washng and rnsng duraton are modfed.
Below you can find the soil groups that can be selected with the “Quick
Wash” setting button:
When "Quck Wash" s not
selected
Sweat
Collar sol
Meal
Mayonnase
Salad dressng
Make-up
Machne ol
Baby food
EN / 38
Washing Machine / User’s Manual
When the "Quck Wash" button
s pressed once
Blood
Chocolate
Puddng
Grass
Mud
Egg
Butter
Curry
When the "Quck Wash" button
s pressed twce
Tea
Coffee
Frut juce
Ketchup
Red wne
Starch
Jam
Coal
• Select the stan programme.
• Select the stan you want to clean by locatng t n the groups above and usng the "Quck
Wash" settng button. For detaled nformaton, see the Programme settngs secton.
• Read the garment tag carefully and ensure that correct temperature and spn speed are
selected.
EN / 39
Washing Machine / User’s Manual
• Duvet
NOTE
• Do not wash the tems apart from duvets such as carpets,
rugs and etc. n the machne. Permanent damage occurs n
the machne.
• Do not load more than 1 double fber duvet (200 x 200
cm). Do not wash your duvets, pllows and etc. that contan
cotton n the machne.
Use ths programme to wash your fber duvets that bear "machne
washable" tag. Check that you have loaded the duvet correctly n order not
to damage the machne and the duvet. Remove the duvet cover before
loadng the duvet nto the machne. Fold the duvet nto two and load t nto
the machne. Load the duvet nto the machne payng attenton to place t n
a way that t wll not contact the bellow or the glass.
EN / 40
Washing Machine / User’s Manual
9.3 Programme table
• : Selectable.
* : Automatcally selected, cannot be cancelled.
** : (EN 60456Ed.3)
***
:If maxmum spn speed of the product s lower then ths value, you can only select
up to the maxmum spn speed.
-
:
See the programme descrpton for maxmum load.
EN 2Auxiliary functions
Programme
Max. Load (kg)
Water Consumption (l)
Energy Consumption (kWh)
Max. Speed***
Prewash
Extra Rinse
Clean&Wear
Anti Crease
Selectable
temperature
range °C
Cottons
90 10 96 2,60 1400 • • • • Cold-90
60 10 96 1,80 1400 • • • • Cold-90
40 10 94 0,95 1400 • • • • Cold-90
20 10 94 0,55 1400 • • • • Cold-90
Cottons Eco
60** 10 49 0,970 1400 Cold-60
60** 5 44 0,760 1400 Cold-60
40** 5 43,5 0,740 1400 Cold-60
Synthetics 60 4 68 1,30 1200 • • • • Cold-60
40 4 66 0,85 1200 • • • • Cold-60
Daily Quick / Super Short
90 10 74 2,00 1400 • • • Cold-90
60 10 70 1,05 1400 • • • Cold-90
30 10 70 0,15 1400 • • • Cold-90
Daily Quick / Super Short + Fast+ 30 2 36 0,15 1400 • • • Cold-90
Mixed Fabrics 40 4 74 0,81 1200 • • • Cold-40
Woollens 40 2 52 0,46 1200 • Cold-40
Delicates 40 4 56 0,65 800 • Cold-40
Duvet 60 - 84 0,86 1000 • Cold-60
Sports 40 5 50 0,28 1200 • Cold-40
Dark Care 40 5 85 0,95 1200 • * • • Cold-40
StainExpert 60 5 83 1,50 1400 • 30-60
Shirts 60 4 54 1,15 800 • • • • Cold-60
Refresh - 1 1 0,22 - * -
Anti Allergy 90 9 105 2,12 1400 * • 20-90
Drum Clean 70 - 72 1,95 600 * 70
EN / 41
Washing Machine / User’s Manual
** “Cotton Economc 40°C" and "Cotton Economc 60°C" are
standard programmes. These programmes are known as
"40°C cotton standard programme" and "60°C cotton standard
programme" and ndcated wth the symbols on the
panel.
NOTE
• Water and power consumpton may vary from the above
table subject to the changes n water pressure, water
hardness and temperature, ambent temperature, type and
amount of laundry, selecton of auxlary functons and spn
speed, and changes n electrc voltage.
• You can see the washng duraton on the dsplay of your
machne whle selectng a programme. Dependng on the
amount of laundry you have loaded nto your machne,
there may be a dfference of 1-1.5 hours between the
duraton shown on the dsplay and the actual duraton of
the wash cycle. Duraton wll be automatcally updated
soon after the washng starts.
• Auxlary functon selecton modes can be changed by the
manufacturng company. Exstng selecton modes can be
removed or new selecton modes can be added.
• "The manufacturer reserves the rght to make
modfcatons n the programmes and auxlary functons
gven n the table. Whle these modfcatons wll not
change the product performance, programme steps and
duratons can change."
Indcatve values for Synthetcs programmes (EN)
Load (kg)
Water
Consumpton
(l)
Energy
Consumpton
(kWh)
Programme
Duraton
(mn) *
Remanng Mosture
Content (%) **
Remanng Mosture
Content (%) **
≤ 1000 rpm > 1000 rpm
Synthetcs 60 4 68 1,30 125/160 45 40
Synthetcs 40 4 66 0,85 125/160 45 40
* You can see the washng tme of the programme you have selected on the dsplay of the machne. It s normal that
small dfferences may occur between the tme shown on the dsplay and the real washng tme.
** Remanng mosture content values may dffer accordng to the selected spn speed.
EN / 42
Washing Machine / User’s Manual
9.4 Auxlary functon selecton
NOTE
• When you try to change an auxlary functon that s not
allowed to be selected wth the current programme,
ndcator lght of the relevant auxlary functon wll not
flash, only an audo warnng s gven. Frames of avalable
optons wll be lt.
• If a second auxlary functon conflctng wth the frst one s
selected before startng the product, the functon selected
frst wll be cancelled and the second auxlary functon
selecton wll reman actve.
• An auxlary functon that s not compatble wth the
programme cannot be selected. (See "Programme and
consumpton table")
• Some programmes have auxlary functons that must
be operated smultaneously. Those functons cannot be
cancelled. The frame of the auxlary functon wll not be
llumnated, only nner area wll be llumnated.
a) Select the desred auxlary functons before startng the programme.
b) Lght of the selected auxlary functon turns on.
NOTE
• You may select or cancel auxlary functons sutable for the
current programme after the washng has started. If the
wash cycle has reached a pont where no auxlary functon
can be selected, an audo warnng wll be gven.
EN / 43
Washing Machine / User’s Manual
9.4.1 Auxlary functons
• Prewash
A Prewash s only worthwhle for heavly soled laundry. Not usng the
Prewash wll save energy, water, detergent and tme.
• Extra Rnse
Ths functon enables the product to make another rnsng n addton to
the one already made after the man wash. Thus, the rsk for senstve
skns (babes, allergc skns, etc.) to be effected by the mnmal detergent
remnants on the laundry can be reduced.
• Clean & Wear
When selected, t uses hot ar at the end of the programme to make the
garments ready to wear.
NOT
• When ths functon s selected, the maxmum load s 1 kg.
• When ths functon s pressed once, the functon selecton
wll be actve. When pressed for the second or thrd tme,
the tme wll decrease. If the load s less than 1 kg, the tme
can be decreased.
EN / 44
Washing Machine / User’s Manual
9.4.2 "Functons/Programmes Selected by
Pressng the Functon Buttons for 3 Seconds"
• Drum Clean
CAUTION!
• Ths s not a Laundry washng programme. It s a
mantenance programme.
• Do not run ths programme when there are any objects n
the machne. If you try to do so, the machne detects that
there s a load nsde and aborts the programme.
Ths programme s selected by pressng the 1st auxlary functon key for 3
seconds.
Run ths programme wth the machne unloaded on a regular bass (once
a month or every two months) to clean the drum. To obtan better results,
put powder lme-scale remover for washng machnes nto the detergent
compartment no. “2”. Ths programme contans a dryng step that runs after
the drum cleanng step to dry the nsde of the machne.
• Ant Crease
Ths functon s selected when the 3th auxlary functon s pressed and held
for 3 seconds and the programme follow-up lght for the relevant step turns
on.
When selected, t aerates the laundry for up to 8 hours at the end of
the programme to prevent creasng. You can cancel the programme and
take your laundry out at any tme durng the 8-hour duraton. Press the
functon selecton key or the machne on/off key to cancel the functon. The
programme follow-up lght wll reman on untl the functon s canceled or
the step s complete. If the functon cannot be cancelled, t wll be actve n
the subsequent washng cycles as well.
• Chld Lock
Use Chld Lock functon to prevent chldren from tamperng wth the
product. Thus you can avod any changes n a runnng programme.
NOTE
• You can swtch on and off the product wth On / Off button
when the Chld Lock s actve. When you swtch on the
product agan, programme wll resume from where t has
stopped.
EN / 45
Washing Machine / User’s Manual
To actvate the Chld Lock:
a) Press and hold 2nd auxlary functon button for 3 seconds.
b) Programme selecton dsplay on the panel wll count down from 3.
c) The "symbol" on programme selecton dsplay on the panel wll
appear.
60
800
3
60
800
To deactvate the Chld Lock:
a) Press and hold 2nd auxlary functon button for 3 seconds.
b) Programme selecton dsplay on the panel wll count down from 3.
c) The "symbol" on programme selecton dsplay on the panel wll
dsappear.
60
800
3
60
800
2 45
EN / 46
Washing Machine / User’s Manual
10. Programme settng
10.1 Temperature selecton
a) Whenever a new programme s selected, the recommended
temperature for the selected programme appears on the
temperature ndcator.
b) To decrease the temperature, press the Temperature Adjustment
button. Temperature wll decrease gradually.
c) It turns back to the begnnng after "Cold" opton and arrves at the
hghest temperature selectable accordng to the programme.
60
800
2 30
10.2 Spn speed selecton
a) Whenever a new programme s selected, the recommended spn
speed of the selected programme s dsplayed on the spn speed
ndcator.
b) To decrease the spn speed, press the Spn Speed Adjustment
button. Spn speed decreases gradually.
c) Maxmum speed allowed for the relevant programme appears after
pressng agan.
60
800
2 25
d) "Rnse Hold" and "No Spn" optons are shown after speed levels.
EN / 47
Washing Machine / User’s Manual
• Rnse Hold
If you are not gong to unload your clothes mmedately after the
programme completes, you can use rnse hold functon to keep your laundry
n the fnal rnsng water n order to prevent them from gettng wrnkled
when there s no water n the machne. Press Start / Pause button after
ths process f you want to dran the water wthout spnnng your laundry.
Programme wll resume and completes after dranng the water.
If you want to spn the laundry held n water, adjust the spn speed and
press Start / Pause button. The programme resumes. Water s draned,
laundry s spun and the programme s completed.
• No Spn
Use ths functon f you do not want your clothes be spun at the end of the
programme.
10.3 Quck Wash Settng (Fast+)
60
800
2 45
After selectng a programme, you can press the Quck Wash settng key to
shorten the programme duraton. For some programmes, the duraton can
shorten by over 50%. Despte ths, the washng performance s good thanks
to the changed algorthm.
Although t vares n each programme, when you press the Quck Wash key
once, the programme duraton decreases to a certan level, and when you
press the same key for the second tme, t drops to the mnmum level.
For a better washng performance, do not use the Quck Wash settng key
when washng heavly soled laundry.
Shorten the programme duraton by usng the Quck Wash key for
Moderately and Slghtly soled laundry.
EN / 48
Washing Machine / User’s Manual
10.4 Startng the programme
a) Press Start / Pause button to start the programme.
b) Programme follow-up lght showng the startup of the programme
wll turn on.
60
800
2 45
10.5 Programme steps
a) The symbols below appear on programme follow-up ndcator after
the programme starts.
- Wash
- Rnse
- Spn
- End
- Ant-creasng+ (Once the relevant functon has been
selected, ths symbol becomes on and remans on untl
t s cancelled. See "Functons/Programmes Selected by
Pressng the Functon Buttons for 3 Seconds")
60
800
2 45
60
800
2 45
NOTE
• "No Water" symbol appears f water s not
suppled to the product. Programme steps do
not contnue.
EN / 49
Washing Machine / User’s Manual
10.6 End of programme
a) "End" symbol appears on the dsplay when the programme s
complete.
60
800
2 45
60
800
2 45
NOTE
• If you do not press any button for 10 mnutes, the product
wll turn off automatcally. Dsplay and all ndcators are
turned off.
• Completed programme steps wll be dsplayed f you press
On / Off button.
b) Remove your laundry.
c) Swtch off the product by pressng and holdng the On/Off button
for 3 seconds.
d) Close the tap connected to the product.
e) Unplug the product.
EN / 50
Washing Machine / User’s Manual
11. Programme optons
11.1 Settng the end tme
NOTE
• Do not use lqud detergents wthout a lqud cup when you
actvate End Tme functon. There s the rsk of stanng of
the clothes.
• When the End Tme selecton s completed, the tme
appears on the dsplay s the end tme chosen plus the
duraton of the selected programme.
a) Wth the End Tme functon, the startup of the programme can
be delayed up to 24 hours. After pressng End Tme button, the
programme's estmated endng tme s dsplayed. If the End Tme s
adjusted, End Tme ndcator s llumnated.
60
800
9 30
60
800
9 30
b) Open the loadng door, place the laundry and put detergent, etc.
c) Select the washng programme, temperature, spn speed and, f
requred, the auxlary functons.
d) Set the end tme of your choce by pressng the End Tme button.
End Tme ndcator llumnates.
e) Close the loadng door.
f) Press the Start / Pause button. Tme countdown starts. “:” symbol
n the mddle of the end tme on the dsplay starts flashng and the
loadng door locks down.
NOTE
• The product enters standby mode 10 sec after pressng
Start / Pause button f the loadng door s not closed and
End Tme Settng Symbol ndcator and Start / Pause lght
starts flashng.
EN / 51
Washing Machine / User’s Manual
Addng laundry durng End Tme countdown.
a) Press the Start / Pause button.
b) The loadng door wll open and the door symbol on the dsplay wll go
off.
c) Open the loadng door and add laundry.
d) Close the loadng door.
f) Press the Start / Pause button.
60
800
9 30
11.1.1 Cancellng the end tme settng
a) If you want to cancel End Tme functon, press On / Off button for 3
sec. to turn off and on the product.
60
800
9 30
11.2 Swtchng the machne to standby mode and
addng laundry
60
800
2 45
a) Press the Start/Pause button to swtch the machne to pause mode
whle a programme s runnng.
b) Start/Pause lght and the programme step lght n the programme
follow-up ndcator wll start flashng.
EN / 52
Washing Machine / User’s Manual
c) If the water level n the machne s sutable, the door lock wll be
deactvated and the door wll open, allowng you to add garments.
The door lock con on the dsplay goes off when the door lock s
deactvated.
d) After addng garments, close the door and press Start/Pause button
once agan to resume the washng cycle.
e) If the water level n the machne s not sutable when you press
Start/Pause button, the door lock cannot be deactvated and the
door lock con on the dsplay remans on.
NOTE
• If the temperature of the water nsde the machne s
above 50°C, you cannot deactvate the door lock for safety
reasons, even f the water level s sutable.
11.3 Cancellng the programme
a) Press and hold On / Off button for 3 seconds.
NOTE
• If you press On / Off button when the Chld Lock s enabled,
the programme wll not be cancelled. You should cancel the
chld lock frst. See To deactvate the chld lock.
• If you want to open the loadng door after you have
cancelled the programme but t s not possble to open
the loadng door snce the water level n the product s
above the loadng door openng, then turn the Programme
Selecton knob to Pump+Spn programme and dscharge
the water n the product.
b) Programme selecton dsplay on the panel wll count down as “3, 2,
1”.
c) The programme s cancelled.
60
800
2 45
EN / 53
Washing Machine / User’s Manual
12. Addtonal features
12.1 Actvatng and deactvatng the audo warnng
a) Press and hold 1st and 2nd auxlary functon buttons for 3 seconds
to actvate and deactvate the audo warnng.
b) Programme selecton dsplay on the panel wll count down as “3, 2, 1”.
c) If the audo warnng s actve t wll be deactvated and vce versa.
60
800
3
bib
60
800
3
bib
12.2 Loadng door lock
a) Press Start / Pause button to lock the loadng door for safety
purposes after startng any process.
b) The door wll not unlock f the product contans enough water to
spll out when the door s opened.
c) "Door Locked" symbol appears when the loadng door s locked.
12.2.1 Openng the loadng door n case of power falure:
NOTE
• In case of power falure, you can use the loadng door
emergency handle under the pump flter cap to open the
loadng door manually.
WARNING!
• To avod any water overflow before openng the loadng
door, make sure there s no water left nsde the machne.
a) Open the pump flter cap.
EN / 54
Washing Machine / User’s Manual
b) Release the loadng door emergency handle
located at the rear sde of the flter cap.
c) Pull down the loadng door emergency handle
once and open the loadng door. After openng
the loadng door, re-nsert the loadng door
emergency handle.
d) If the loadng door does not open, try agan by
pullng down the handle.
12.3 Drum Illumnaton
Drum llumnaton lamp of your machne wll lght up durng
programme selecton. The lght wll turn off when you start the
programme. If no programme s started or no key s pressed wthn 10
mnutes durng programme selecton process, the drum llumnaton
lamp wll turn off.
Drum llumnaton lamp of your machne wll lght up after the
programme s completed. It wll go off when you press the On/Off
button. The drum llumnaton lamp wll turn off f you do not press
any button wthn 10 mnutes after the programme has ended.
EN / 55
Washing Machine / User’s Manual
13. Mantenance and cleanng
13.1 Cleanng the detergent drawer
NOTE
• Clean the detergent drawer at regular ntervals (every
4-5 washng cycles) as shown below n order to prevent
accumulaton of powder detergent n tme.
• If more than normal amount of water and softener mxture
starts to gather n the softener compartment, the sphon
must be cleaned.
a) Press the dotted pont on the sphon n the softener compartment
and pull and remove the detergent drawer towards yourself.
b) Lft the rear part of the sphon to remove t as llustrated.
c) Wash the detergent drawer and the sphon wth plenty of lukewarm
water n a washbasn. In order to prevent the resdues to contact
your skn, clean t wth an approprate brush by wearng a par of
gloves.
d) Place the sphon back nto ts seat securely after cleanng and nsert
the drawer back.
13.2 Cleanng the loadng door
a) After every washng check that no foregn substance s left n the
drum.
b) If the holes on the bellow shown n the fgure are blocked, open the
holes usng a toothpck.
c) Foregn metal substances wll cause rust stans n the drum. Clean
the stans on the drum surface by usng cleanng agents for stanless
steel.
d) Never use steel wool or wre wool. These wll damage the panted,
chromated and plastc surfaces.
13.3 Cleanng the body and control panel
a) Wpe the body of the product wth soapy water or non-corrosve
mld gel detergents as necessary, and dry wth a soft cloth.
b) Use only a soft and damp cloth to clean the control panel.
EN / 56
Washing Machine / User’s Manual
13.4 Cleanng the water ntake flters
There s a flter at the end of each water ntake valve at the rear of the
product and also at the end of each water ntake hose where they are
connected to the tap. These flters prevent foregn substances and drt n
the water to enter the product. Flters should be cleaned f they are drty.
a) Close the taps.
b) Remove the nuts of the water ntake hoses to
access the flters on the water ntake valves.
Clean them wth an approprate brush. If the
flters are too drty, remove them from ther
places wth a plers and clean n ths way.
c) Take out the flters on the flat ends of the
water ntake hoses together wth the gaskets
and clean thoroughly under runnng water.
d) Replace the gaskets and flters carefully n
ther places and tghten the hose nuts by
hand.
13.5 Cleanng the pump flter
CAUTION!
• Foregn substances left n the pump flter may damage
your product or may cause nose problem.
• In regons where freezng s possble, the tap must be
closed, system hose must be removed and the water nsde
the product must be draned when the product s not n
use.
NOTE
• After each use, turn off the tap to whch the mans hose s
connected.
The flter system n your product prevents sold tems such as buttons, cons
and fabrc fbers cloggng the pump mpeller durng dranng of washng
water. Thus, the water wll be draned wthout any problem and the servce
lfe of the pump wll extend.
If the product fals to dran water nsde t, the pump flter s clogged. Flter
must be cleaned whenever t s clogged or n every 3 months. Water must be
draned off frst to clean the pump flter.
EN / 57
Washing Machine / User’s Manual
13.5.1 Cleanng drty flters
CAUTION!
• Temperature of the water nsde the product may rse up
to 90ºC. To avod the rsk of scaldng, clean the flter after
the water nsde the product has cooled down.
a) Unplug the product.
b) Open the flter cap.
Open the flter cap.
c) Proceed as follows for dranng water.
- Pull the emergency dranng hose out from ts seat.
- Place a large contaner at the end of the hose. Dran the
water nto the contaner by pullng out the plug at the
end of the hose. When the contaner s full, block the nlet
of the hose by replacng the plug. After the contaner s
empted, repeat the above procedure to dran the water
n the product completely.
- When dranng of water s fnshed, close the end by the
plug agan and fx the hose n ts place.
- Turn the pump flter to take t out.
d) Clean any resdues nsde the flter as well as fbers, f any, around
the pump mpeller regon.
e) Install the flter.
f) Close the flter cover.
EN / 58
Washing Machine / User’s Manual
14. Troubleshootng
Problem Cause Soluton
Programs do not
start after the
loading door is
closed.
Start / Pause / Cancel button s
not pressed.
•
Press Start / Pause / Cancel button.
It may be dffcult to close
the loadng door n case of
excessve loadng.
•
Reduce the amount of laundry and make
sure that the loadng door s closed
properly.
Programme cannot
be started or
selected.
The product has swtched to
self protecton mode due to a
supply problem (lne voltage,
water pressure, etc.).
•
The programme s cancelled when the
product s turned off and on agan. Press
and hold On / Off button for 3 seconds.
Water inside the
product.
Some water has remaned n
the product due to the qualty
control processes n the
producton.
•
Ths s not a falure; water s not harmful
to the product.
The product does
not take water in.
Tap s turned off. •
Turn on the taps.
Water nlet hose s bent. •
Flatten the hose.
Water nlet flter s clogged. •
Clean the flter.
Loadng door s not closed. •
Close the door.
The product does
not drain water.
Water dran hose s clogged or
twsted.
•
Clean or flatten the hose.
Pump flter s clogged. •
Clean the pump flter.
Product vibrates or
makes noise.
Product s standng
unbalanced.
•
Stable the product by adjustng the feet.
A hard substance has entered
nto the pump flter.
•
Clean the pump flter.
Transportaton safety bolts are
not removed.
•
Remove the transportaton safety bolts.
Laundry quantty n the
product s too lttle.
•
Add more laundry to the product.
Excessve laundry s loaded n
the product.
•
Take out some of the laundry from the
product or dstrbute the load by hand to
balance t homogeneously n the product.
Product s leanng on a rgd
tem.
•
Make sure that the product s not leanng
on anythng.
There is water
leaking from the
bottom of the
product.
Water dran hose s clogged or
twsted.
•
Clean or flatten the hose.
Pump flter s clogged. •
Clean the pump flter.
Product stopped
shortly after the
programme started.
Machne has stopped
temporarly due to low voltage.
•
Product wll resume runnng when the
voltage restores to the normal level.
EN / 59
Washing Machine / User’s Manual
Problem Cause Soluton
Product directly
drains the water it
takes in.
Dranng hose s not at
adequate heght.
•
Connect the water dranng hose as
descrbed n the user manual.
No water can be
seen in the product
during washing.
Water s nsde the nvsble
part of the product.
•
Ths s not a falure.
Loading door cannot
be opened.
Loadng door lock s actvated
because of the water level n
the product.
•
Dran the water by runnng the Pump or
Spn programme.
Product s heatng up the
water or t s at the spnnng
cycle.
•
Wat untl the programme completes.
Loadng door may be stuck
because of the pressure t s
subjected to.
•
Grab the handle and push and pull the
loadng door to release and open t.
If there s no power, loadng
door of the product wll not
open.
•
To open the loadng door, open the pump
flter cap and pull down the emergency
handle postoned at the rear sde of the
sad cap. See “Openng the loadng door n
case of power falure”
The door of the machne
mght not open due to safety
reasons.
•
If the door remans locked at the end of
the programme when the Wash&Wear
functon s selected, ths means that the
door wll be locked untl the machne gets
cold for safety reasons.
Washing takes
longer than
specified in the user
manual.(*)
Water pressure s low. •
Product wats untl takng n adequate
amount of water to prevent poor
washng qualty due to the decreased
amount of water. Therefore, the washng
tme extends.
Voltage s low. •
Washng tme s prolonged to avod poor
washng results when the supply voltage
s low.
Input temperature of water
s low.
•
Requred tme to heat up the water
extends n cold seasons. Also, washng
tme can be lengthened to avod poor
washng results.
Number of rnses and/or
amount of rnse water have
ncreased.
•
Product ncreases the amount of rnse
water when good rnsng s needed and
adds an extra rnsng step f necessary.
Excessve foam has occurred
and automatc foam
absorpton system has been
actvated due to too much
detergent usage.
•
Use recommended amount of detergent.
EN / 60
Washing Machine / User’s Manual
Problem Cause Soluton
Programme
time does not
countdown. (On
models with display)
(*)
Tmer may stop durng water
ntake.
•
Tmer ndcator wll not countdown untl
the product takes n adequate amount of
water. The product wll wat untl there s
suffcent amount of water to avod poor
washng results due to lack of water.
Tmer ndcator wll resume countdown
after ths.
Tmer may stop durng heatng
step.
•
Tmer ndcator wll not countdown
untl the product reaches the selected
temperature.
Tmer may stop durng
spnnng step.
•
Automatc unbalanced load detecton
system s actvated due to the
unbalanced dstrbuton of the laundry n
the product.
Programme
time does not
countdown. (*)
There s unbalanced load n the
product.
•
Automatc unbalanced load detecton
system s actvated due to the
unbalanced dstrbuton of the laundry n
the product.
Product does not
switch to spinning
step. (*)
There s unbalanced load n the
product.
•
Automatc unbalanced load detecton
system s actvated due to the
unbalanced dstrbuton of the laundry n
the product.
The product wll not spn
f water s not draned
completely.
•
Check the flter and the dranng hose.
Excessve foam has occurred
and automatc foam
absorpton system has been
actvated due to too much
detergent usage.
•
Use recommended amount of detergent.
Washing
performance is poor:
Laundry turns gray.
(**)
Insuffcent amount of
detergent has been used over
a long perod of tme.
•
Use the recommended amount of
detergent approprate for water
hardness and the laundry.
Washng has been made at low
temperatures for a long tme.
•
Select the proper temperature for the
laundry to be washed.
Insuffcent amount of
detergent s used wth hard
water.
•
Usng nsuffcent amount of detergent
wth hard water causes the sol to
stck on the cloth and ths turns the
cloth nto gray n tme. It s dffcult to
elmnate grayng once t happens. Use
the recommended amount of detergent
approprate for water hardness and the
laundry.
Excessve amount of
detergent s used.
•
Use the recommended amount of
detergent approprate for water
hardness and the laundry.
EN / 61
Washing Machine / User’s Manual
Problem Cause Soluton
Washing
performance is poor:
Stains persist or
the laundry is not
whitened. (**)
Insuffcent amount of
detergent s used.
•
Use the recommended amount of
detergent approprate for water
hardness and the laundry.
Excessve laundry s loaded n. •
Do not load the product n excess. Load
wth amounts recommended n the
"Programme and consumpton table".
Wrong programme and
temperature were selected.
•
Select the proper programme and
temperature for the laundry to be
washed.
Wrong type of detergent s
used.
•
Use orgnal detergent approprate for
the product.
Excessve amount of
detergent s used.
•
Put the detergent n the correct
compartment. Do not mx the bleachng
agent and the detergent wth each other.
Washing
performance is poor:
Oily stains appeared
on the laundry. (**)
Regular drum cleanng s not
appled.
•
Clean the drum regularly.
Washing
performance is
poor: Clothes smell
unpleasantly. (**)
Odours and bactera layers
are formed on the drum as a
result of contnuous washng
at lower temperatures and/or
n short programmes.
•
Leave the detergent drawer as well
as the loadng door of the product ajar
after each washng. Thus, a humd
envronment favorable for bactera
cannot occur n the machne.
Colour of the clothes
faded. (**)
Excessve laundry was loaded
n.
•
Do not load the product n excess.
Detergent n use s damp. •
Keep detergents closed n an
envronment free of humdty and do not
expose them to excessve temperatures.
A hgher temperature was
selected.
•
Select the proper programme and
temperature accordng to the type and
solng degree of the laundry.
Laundry is
shrunken, pale,
matted or impaired.
The programme mght not be
sutable for the laundry type.
•
Check the labels of the laundry to select
a programme sutable for the type of the
laundry and do not use the Wash&Wear
functon for laundry that s not sutable
for dryng.
Washing machine
does not rinse well.
The amount, brand and
storage condtons of
the detergent used are
napproprate.
•
Use a detergent approprate for the
washng machne and your laundry. Keep
detergents closed n an envronment free
of humdty and do not expose them to
excessve temperatures.
Detergent was put n the
wrong compartment.
•
If detergent s put n the prewash
compartment although prewash cycle s
not selected, the product can take ths
detergent durng rnsng or softener
step. Put the detergent n the correct
compartment.
Pump flter s clogged. •
Check the flter.
Dran hose s folded. •
Check the dran hose.
EN / 62
Washing Machine / User’s Manual
Problem Cause Soluton
Laundry became
stiff after washing.
(**)
Insuffcent amount of
detergent s used.
•
Usng nsuffcent amount of detergent
for the water hardness can cause the
laundry to become stff n tme. Use
approprate amount of detergent
accordng to the water hardness.
Detergent was put n the
wrong compartment.
•
If detergent s put n the prewash
compartment although prewash cycle s
not selected, the product can take ths
detergent durng rnsng or softener
step. Put the detergent n the correct
compartment.
Detergent was mxed wth the
softener.
•
Do not mx the softener wth detergent.
Wash and clean the drawer wth hot
water.
Laundry does
not smell like the
softener. (**)
Detergent was put n the
wrong compartment.
•
If detergent s put n the prewash
compartment although prewash cycle s
not selected, the product can take ths
detergent durng rnsng or softener
step. Wash and clean the drawer wth hot
water. Put the detergent n the correct
compartment.
Detergent was mxed wth the
softener.
•
Do not mx the softener wth detergent.
Wash and clean the drawer wth hot
water.
Detergent residue
in the detergent
drawer. (**)
Detergent was put n wet
drawer.
•
Dry the detergent drawer before puttng
n detergent.
Detergent has gotten damp. •
Keep detergents closed n an
envronment free of humdty and do not
expose them to excessve temperatures.
Water pressure s low. •
Check the water pressure.
The detergent n the man
wash compartment got wet
whle takng n the prewash
water. Holes of the detergent
compartment are blocked.
•
Check the holes and clean f they are
clogged.
There s a problem wth the
detergent drawer valves.
•
Call the Authorsed Servce Agent.
Detergent was mxed wth the
softener.
•
Do not mx the softener wth detergent.
Wash and clean the drawer wth hot
water.
Regular drum cleanng s not
appled.
•
Clean the drum regularly.
EN / 63
Washing Machine / User’s Manual
Problem Cause Soluton
Too much foam
forms inside the
product. (**)
Improper detergents for the
washng machne s used.
•
Use detergents approprate for the
washng machne.
Excessve amount of
detergent s used.
•
Use only suffcent amount of detergent.
Detergent was stored under
mproper condtons.
•
Store detergent n a closed and dry
locaton. Do not store n excessvely hot
places.
Some meshed laundry such
as tulle may foam too much
because of ther texture.
•
Use smaller amounts of detergent for
ths type of tem.
Detergent was put n the
wrong compartment.
•
Put the detergent n the correct
compartment.
Softener s beng taken early
by the product.
•
There may be problem n the valves or n
the detergent drawer. Call the Authorsed
Servce Agent.
Foam is overflowing
from the detergent
drawer.
Too much detergent s used. •
Mx 1 tablespoonful softener and ½
l water and pour nto the man wash
compartment of the detergent drawer.
•
Put detergent nto the product sutable
for the programmes and maxmum loads
ndcated n the “Programme table”.
When you use addtonal chemcals (stan
removers, bleaches and etc), reduce the
amount of detergent.
Laundry remains
wet at the end of
the programme. (*)
Excessve foam has occurred
and automatc foam
absorpton system has been
actvated due to too much
detergent usage.
•
Use recommended amount of detergent.
When the
Wash&Wear
function is selected,
the laundry is still
damp at the end of
the programme.
Excessve laundry s loaded n. •
Load a maxmum of 1 kg when the
Wash&Wear functon s selected.
Functon s not actve. •
After the selected washng programme,
check f the Wash&Wear functon has
been selected or not.
(*) The product does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the product and to its surrounding
environment. Laundry should be rearranged and re-spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly.
CAUTION!
• If you cannot elmnate the problem although you follow
the nstructons n ths secton, consult your dealer
or the Authorzed Servce Agent. Never try to repar a
nonfunctonal product yourself.
BEKO UK AND IRELAND STANDARD MANUFACTURER GUARANTEE TERMS AND CONDITIONS
Your new Beko product is guaranteed against faulty materials, defective components or manufacturing defects.
The standard guarantee starts from the date of original purchase of the product, and lasts for a period of twelve (12)
months unless Beko plc (the “Manufacturer”) agrees to extend the guarantee for the product in writing.
If you have purchased an American style Fridge freezer, the standard guarantee starts from the date of original
purchase of the product, and lasts for a period of twenty four (24) months unless Beko plc (the “Manufacturer”)
agrees to extend the guarantee for the product in writing.
If you have any questions about the guarantee on your product (including how long it is valid), please contact your retailer or
our contact centre on 0333 207 9710 (UK and Northern Ireland) or 01 862 3411 (Republic of Ireland)
This guarantee does not in any way diminish or affect your statutory rights in connection with the product. This guarantee is in
addition to your statutory rights as a consumer. If you have any questions about these rights, please contact the retailer from
which you purchased the product. In certain circumstances, it is possible that your statutory rights may offer additional or
higher levels of protection than those offered under the terms of this guarantee.
What is covered by this guarantee?
• Repairs to the product required as a result of faulty materials, defective components or manufacturing defects.
• Functional replacement parts to repair a product.
• The costs of a Beko Approved Engineer to carry out the repair.
What is not covered?
• Transit and delivery damage.
• Cabinet or appearance parts, including but not limited to control knobs, flaps and handles.
• Accessories and/or consumable items including but not limited to ice trays, scrapers, cutlery baskets, filters and light
bulbs.
• Repairs necessary as a direct or indirect result of:
- Accidental damage, misuse or abuse of a product.
- An attempted repair of a product by anyone other than a Beko Approved Engineer (the “Engineer”).
- Installation or use of a product where such installation or use fails to meet the requirements contained in this
guarantee or the User Instructions Booklet.
• Repairs to a product operated at any time on commercial or non-residential household premises (unless we have
previously agreed to the installation environment).
This guarantee is limited to the cost of repairing the product. To the extent permitted by law, the Manufacturer does not accept
and will not be held liable for any financial loss incurred in connection with the failure of any product to operate in accordance
with the expected standards. Such financial loss includes but is not limited to loss arising from:
• Time taken off work.
• Damaged food, clothing or other items.
• Meals taken at restaurants or from takeaways.
• General compensation for inconvenience.
Important Notes
1. Your product is designed and built for domestic household use only.
2. The guarantee will automatically be void if the product is installed or is used in commercial or non-residential
domestic household premises, unless we have previously agreed to the installation environment.
3. The product must be correctly installed, located and operated in accordance with the instructions contained in the
User Instructions Booklet provided with your product.
4. Professional installation by a qualified Electrical Domestic Appliance Installer is recommended for all Washing
Machines, Dishwashers and Electric Cookers (as incorrect installation may result in you having to pay for the cost of
repairing the product).
5. Gas Cookers must be professionally installed by a Gas Safe (or Gas Networks Ireland for Republic of Ireland)
registered gas installer.
6. This guarantee is given in respect of products purchased and used within the United Kingdom and the Republic of
Ireland.
7. This guarantee is effective from the initial date of purchase of a new product from an authorised retailer and will be
void if the product is resold.
8. This guarantee does not apply to graded sales (where the product is purchased as a “second”).
9. Possession of a copy of these terms and conditions does not necessarily mean that a product has the benefit of this
guarantee. If you have any questions, please call our Call Centre on the number set out above.
10. The Manufacturer reserves the right to terminate the guarantee if its staff or representatives are subjected to physical
or verbal abuse in the course of carrying out their duties.
11. Optional extras, where available (i.e. extendable feet) are supplied on a chargeable basis only.
Does Beko offer replacements?
This is a repair-only guarantee. On occasion, the Manufacturer may at its sole discretion, replace your product with a new
product instead of carrying out a repair. Where a replacement is offered, this would normally be an identical model but when
this is not possible, a model of similar specification will be provided. The Manufacturer will cover the costs and arrange for the
delivery of the new product and for the return of the old product. Any costs related to disconnecting the faulty product and
installing the replacement product will not be borne by the Manufacturer unless previously agreed to in writing. The original
guarantee will continue to apply to the replacement product; the new product will not come with a new guarantee.
When will the repair take place?
Our Engineers work Monday to Friday 9.00am to 5.00pm. Appointments outside these hours may be possible at the sole
discretion of the Manufacturer but cannot be guaranteed. Whilst our Engineers will endeavour to minimize inconvenience and
to meet requests for specific timed appointments, this cannot be guaranteed. We will not be liable for delays or if it is unable to
carry out a repair because a convenient appointment cannot be arranged.
Will there be any charge for the repairs?
It is your responsibility to provide evidence to the Engineer that your product is covered by this guarantee with a proof of
purchase. The Manufacturer reserves the right to charge for the reasonable cost of any service call if:
• You cannot provide evidence that your product is covered by this guarantee.
• Where a service call has been made and the engineer finds that there is no fault with your product.
• That your product has not been installed or operated in accordance with the User Instructions Booklet.
• That the fault was caused by something other than faulty materials, defective components or manufacturing defects.
• For missed appointments.
Payment of these costs are due immediately upon the Engineer providing you with an invoice. The Manufacturer reserves the
right to terminate the guarantee if you fail to pay the costs for the service call in a timely manner.
If you are a resident of the United Kingdom, this guarantee will be governed by English law and subject to the English Courts,
save where you live in another part of the United Kingdom, in which case the law and courts of that location will apply.
If you are resident in the Republic of Ireland, this guarantee will be governed by Irish law and the Irish courts will have
jurisdiction.
This guarantee is provided by Beko plc. Beko House, 1 Greenhill Crescent, Watford, Hertfordshire. WD18 8QU.
Beko plc is registered in England and Wales with company registration number 02415578.
9. Possession of a copy of these terms and conditions does not necessarily mean that a product has the benefit of this
guarantee. If you have any questions, please call our Call Centre on the number set out above.
10. The Manufacturer reserves the right to terminate the guarantee if its staff or representatives are subjected to physical
or verbal abuse in the course of carrying out their duties.
11. Optional extras, where available (i.e. extendable feet) are supplied on a chargeable basis only.
Does Beko offer replacements?
This is a repair-only guarantee. On occasion, the Manufacturer may at its sole discretion, replace your product with a new
product instead of carrying out a repair. Where a replacement is offered, this would normally be an identical model but when
this is not possible, a model of similar specification will be provided. The Manufacturer will cover the costs and arrange for the
delivery of the new product and for the return of the old product. Any costs related to disconnecting the faulty product and
installing the replacement product will not be borne by the Manufacturer unless previously agreed to in writing. The original
guarantee will continue to apply to the replacement product; the new product will not come with a new guarantee.
When will the repair take place?
Our Engineers work Monday to Friday 9.00am to 5.00pm. Appointments outside these hours may be possible at the sole
discretion of the Manufacturer but cannot be guaranteed. Whilst our Engineers will endeavour to minimize inconvenience and
to meet requests for specific timed appointments, this cannot be guaranteed. We will not be liable for delays or if it is unable to
carry out a repair because a convenient appointment cannot be arranged.
Will there be any charge for the repairs?
It is your responsibility to provide evidence to the Engineer that your product is covered by this guarantee with a proof of
purchase. The Manufacturer reserves the right to charge for the reasonable cost of any service call if:
• You cannot provide evidence that your product is covered by this guarantee.
• Where a service call has been made and the engineer finds that there is no fault with your product.
• That your product has not been installed or operated in accordance with the User Instructions Booklet.
• That the fault was caused by something other than faulty materials, defective components or manufacturing defects.
• For missed appointments.
Payment of these costs are due immediately upon the Engineer providing you with an invoice. The Manufacturer reserves the
right to terminate the guarantee if you fail to pay the costs for the service call in a timely manner.
If you are a resident of the United Kingdom, this guarantee will be governed by English law and subject to the English Courts,
save where you live in another part of the United Kingdom, in which case the law and courts of that location will apply.
If you are resident in the Republic of Ireland, this guarantee will be governed by Irish law and the Irish courts will have
jurisdiction.
This guarantee is provided by Beko plc. Beko House, 1 Greenhill Crescent, Watford, Hertfordshire. WD18 8QU.
Beko plc is registered in England and Wales with company registration number 02415578.
BEKO UK AND IRELAND BUILT-IN APPLIANCES GUARANTEE TERMS AND CONDITIONS
If you have purchased a built-in or integrated appliance, and registered it within 90 days of purchase by completing
the online registration form, then the standard 12 month guarantee will be extended to 24 months, under the same
terms and conditions as detailed in our Standard Guarantee Terms and Conditions.
BEKO UK AND IRELAND PROSMART INVERTER MOTOR GUARANTEE TERMS AND CONDITIONS
This 10 year guarantee relates to Beko products that feature the ProSmart Inverter Motor.
The ProSmart Motor guarantee terms and conditions are in addition to our Standard guarantee terms and conditions detailed
in the previous section.
In order to activate the 10 year guarantee you MUST register the appliance within 90 days of the original purchase
date. You can register by first visiting Beko.co.uk/register and by following the online instructions.
Beko Free standing appliances come with a 12 month parts and labour guarantee as standard,
Beko Built-in appliances come with a 12 month parts and labour guarantee as standard. This is extended to 24 months, free of
charge, upon registration of the appliance. When you register your appliance for additional guarantee, you will automatically
activate the ProSmart Motor 10 year guarantee. You do not need to register twice. (beko.co.uk/guarantee-terms).
To make a claim against your Beko ProSmart Inverter Motor Guarantee (the “Guarantee”), all customer and product details
must be registered with Beko plc using the procedure outlined below.
1. This extra 9 years (for free standing appliances) or 8 years (for built-in or integrated appliances) guarantee is only
effective after the expiration of the standard manufacturer’s guarantee.
2. It is only valid for the ProSmart Inverter motors of selected washing machines, washer-dryers, tumble dryers and
dishwashers. It does not cover any labour charge or any other components of the product. In addition, it is only valid
for one replacement of the ProSmart motor during the extra 9-year (for free standing appliances) or 8 year (for built-in
appliances) guarantee period.
3. To activate your guarantee, you MUST register your appliance within 90 days of the original purchase date, by visiting
beko.co.uk/register.
4. Customers will receive a unique reference code as proof of guarantee validation by email or post, which must be
quoted at the time of a claim being made.
5. Any repair/replacement of the ProSmart Inverter motor must only be carried out by an authorised Beko Service Agent
(the “Service Agent”).
6. Labour for the repair/replacement of the ProSmart Inverter motor is not included in this guarantee and is chargeable
directly by the Service Agent.
7. Any additional components fitted to the product at any time will not be covered by this guarantee and will be
chargeable directly by the Service Agent.
8. The guarantee is not transferable and cannot be exchanged for cash.
9. There are no alternative or additional offers to this Guarantee.
10. The guarantee is exclusive of the manufacturer’s standard guarantee
11. The Terms and Conditions shown above are in addition to the standard terms and conditions of your product
guarantee. Please read and refer to such Terms and Conditions when making any claim.
12. We may use the information you provide for marketing purposes and to analyse your purchasing preferences. We
may keep your information for a reasonable period for these purposes in accordance with the applicable Data
Protection Laws and General Data Protection Regulations (GDPR). You can opt into this service during the
registration process. Further details are available at http://www.beko.co.uk/cookie-and-privacy.
13. These Terms and Conditions are governed by the laws of England and Wales; manufacturer: Beko plc, Beko House,
1 Greenhill Crescent, Watford WD18 8QU. Company Registration Number: 02415578.
HOW TO OBTAIN SERVICE FOR YOUR APPLIANCE
Please keep your purchase receipt or other proof of purchase details in a safe place; you will need to have this documentation
available should the product require attention under guarantee.
Please take a few moments to complete the details below, as you will need this information when you call us, or to use our
online services. When you call us you may be required to input your serial number into your telephone keypad. For help please
visit beko.co.uk/support/model-finder
• The product model number is printed on the Operating Instruction Booklet / User guide
• The product model and serial number is printed on the Rating Label affixed to the appliance.
• The Retailer (Purchased from) and Date of purchase will be printed on your purchase receipt or other proof of
purchase paperwork
Recording of these details alone will not count as proof of purchase. A valid proof of purchase is required for requesting
service under guarantee.
Model number
Serial number
Purchased from
Date of purchase
For service under guarantee or for product advice please call our Contact centre
Before requesting service please check the troubleshooting guide in the Operating Instructions booklet, as a charge may be
levied where no fault is found, and even though your product may still be under guarantee.
After arranging service the area around the product must be easily accessible to the Engineer, without the need for cabinets or
furniture to be removed or moved.
It is your responsibility to ensure our Engineers have a clean and safe environment to carry out any repairs.
Please have your Model number and Serial number available when you call us, as you may be required to input your serial
number into your telephone keypad during your call.
UK Mainland & Northern Ireland:
0333 207 9710
Landline or mobile calls to 0333 numbers cost no more than calls to geographic numbers 01 or 02, and are charged at the
basic rate. Calls from landlines and mobiles are included in free call packages but please check with your telephone service
provider for exact call charges.
Republic of Ireland:
01 862 3411
Service once the manufacturers guarantee has expired
If you have purchased an extended guarantee please refer to the instructions contained within the extended guarantee
agreement document, otherwise please call us using the appropriate number above, where service can be obtained at a
charge.
Should you experience any difficulty in obtaining service please call us on 0333 207 9710 or 01 862 3411
Contact us though our website
Send us a secure message through our online contact us form. Please visit our website, click Contact Us and choose a
product support topic from the list of options. Complete the required details and click send message.
Product registrations
For UK registrations please visit beko.co.uk/register and for the Republic of Ireland visit beko.ie/register.
www.beko.com