Table of Contents
Braun 5145s User Manual
Displayed below is the user manual for 5145s by Braun which is a product in the Men's Shavers category. This manual has pages.
Related Manuals
Series 5
5
5769
91136113/XI-16
91136113_Series_5-2_wd_China_S1.indd 191136113_Series_5-2_wd_China_S1.indd 1 03.11.16 13:0503.11.16 13:05
Stapled booklet, 120 x 170 mm, 24 pages (incl. 8 pages cover), 2/2 = cyan + black
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 1 of 24
6
English 16
Braun GmbH
Frankfurter Straße 145
61476 Kronberg/Germany
www.braun.com
www.service.braun.com
China/UK
91136113_Series_5-2_wd_China_S2.indd 191136113_Series_5-2_wd_China_S2.indd 1 03.11.16 13:0603.11.16 13:06
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 2 of 24
Series 5
Se
Se
ri
e
s 5
5
Series 5
Series 5
1
2
3
6
8
9
10
7
4
5
5b 5c5a
5d
S5
wet&dry
14 17
16
16a 16b 16c
15
18
13
12
11
5197cc
5050cc
5090cc
5145s
Series 5
S5
wet&dry
5
5197cc
5090cc
5050cc
5147s
5040s
3
91136113_Series_5-2_wd_China_S3.indd 191136113_Series_5-2_wd_China_S3.indd 1 03.11.16 13:0603.11.16 13:06
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 3 of 24
90°
20°
20°
10°
10°
0°
0°
10°
10°
20°
10°
0° 10° 20°
Series 5
A
C
B
4
91136113_Series_5-2_wd_China_S4.indd 191136113_Series_5-2_wd_China_S4.indd 1 03.11.16 13:0703.11.16 13:07
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 4 of 24
2
1
D
E
F
1
2
5
91136113_Series_5-2_wd_China_S5.indd 191136113_Series_5-2_wd_China_S5.indd 1 03.11.16 13:0703.11.16 13:07
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 5 of 24
6
91136113_Series_5-2_wd_China_S6-24.indd 691136113_Series_5-2_wd_China_S6-24.indd 6 21.11.16 11:1321.11.16 11:13
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 6 of 24
7
91136113_Series_5-2_wd_China_S6-24.indd 791136113_Series_5-2_wd_China_S6-24.indd 7 21.11.16 11:1321.11.16 11:13
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 7 of 24
8
91136113_Series_5-2_wd_China_S6-24.indd 891136113_Series_5-2_wd_China_S6-24.indd 8 21.11.16 11:1321.11.16 11:13
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 8 of 24
9
91136113_Series_5-2_wd_China_S6-24.indd 991136113_Series_5-2_wd_China_S6-24.indd 9 21.11.16 11:1321.11.16 11:13
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 9 of 24
10
91136113_Series_5-2_wd_China_S6-24.indd 1091136113_Series_5-2_wd_China_S6-24.indd 10 21.11.16 11:1321.11.16 11:13
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 10 of 24
11
91136113_Series_5-2_wd_China_S6-24.indd 1191136113_Series_5-2_wd_China_S6-24.indd 11 21.11.16 11:1321.11.16 11:13
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 11 of 24
12
91136113_Series_5-2_wd_China_S6-24.indd 1291136113_Series_5-2_wd_China_S6-24.indd 12 21.11.16 11:1321.11.16 11:13
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 12 of 24
13
91136113_Series_5-2_wd_China_S6-24.indd 1391136113_Series_5-2_wd_China_S6-24.indd 13 21.11.16 11:1321.11.16 11:13
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 13 of 24
14
Series 5
Series 5
1
1
2
Series 5
Li-ion
91136113_Series_5-2_wd_China_S6-24.indd 1491136113_Series_5-2_wd_China_S6-24.indd 14 21.11.16 11:1321.11.16 11:13
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 14 of 24
15
91136113_Series_5-2_wd_China_S6-24.indd 1591136113_Series_5-2_wd_China_S6-24.indd 15 21.11.16 11:1321.11.16 11:13
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 15 of 24
16
English
Our products are designed to meet the highest standards of quality, functionality and
design. Thank you for your trust in Braun’s quality and we hope you enjoy your new
Braun product.
Read these instructions completely, they contain safety information. Keep them
for future reference.
Warning
Your appliance is provided with a special cord set, which has an
integrated Safety Extra Low Voltage power supply. Do not
exchange or tamper with any part of it, otherwise there is risk of an
electric shock. Only use the special cord set provided with your
appliance.
If the appliance is marked 492, you can use it with any
Braun power supply coded 492-XXXX.
This appliance is suitable for cleaning under running water
and use in a bathtub or shower. For safety reasons it can
only be operated cordless.
Detach the shaver from the power supply before using it with
water.
Do not shave with a damaged foil or cord.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental capa-
bilities or lack of experience and knowledge if they have been given
supervision or instruction concerning the safe use of the appliance
and understand the hazards involved. Children shall not play with
the appliance. Cleaning and user maintenance shall not be made
by children unless they are older than 8 years and supervised.
Clean&Charge Station
To prevent the cleaning fluid from leaking, ensure that the
Clean&Charge Station is placed on a flat surface. When a cleaning
cartridge is installed, do not tip, move suddenly or transport the
station in any way as cleaning fluid might spill out of the cartridge.
Do not place the station inside a mirror cabinet, nor place it on a
polished or lacquered surface.
91136113_Series_5-2_wd_China_S6-24.indd 1691136113_Series_5-2_wd_China_S6-24.indd 16 21.11.16 11:1321.11.16 11:13
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 16 of 24
17
The cleaning cartridge contains a highly flammable liquid so keep
it away from sources of ignition. Do not expose to direct sunlight
and cigarette smoking nor store it over a radiator.
Do not refill the cartridge and use only original Braun refill
cartridges.
Shaver
1 Foil & Cutter cassette
2 Cassette release button
3 MultiHeadLock switch
4 On/off switch
5 Shaver display
5 a Lock symbol (travel lock)
5 b Charging segments
5 c Cleaning indicator
5 d Battery symbol
6 Long hair trimmer
7 Shaver-to-station contacts
8 Release button for long hair trimmer
9 Shaver power socket
10 Special cord set (design can differ)
11 Protection cap*
12 Travel case*
* not with all models
First use and Charging
Connect the shaver to an electrical outlet by snapping the special cord set (10) into the
shaver power socket (9) or for cc models via the Clean&Charge Station (see Chapter
«Clean&Charge Station»).
Basic operating information
• A full charge provides up to 50 minutes of cordless shaving time. This may vary
according to your beard growth and environmental temperature.
• Recommended ambient temperature for charging is 5 °C to 35 °C. The battery may
not charge properly or at all under extreme low or high temperatures.
• Recommended ambient temperature for storage and shaving is 15 °C to 35 °C.
• Do not expose the appliance to temperatures higher than 50 °C for extended periods
of time.
• When the shaver is connected to an electrical outlet, it may take some minutes until
the display illuminates.
91136113_Series_5-2_wd_China_S6-24.indd 1791136113_Series_5-2_wd_China_S6-24.indd 17 21.11.16 11:1321.11.16 11:13
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 17 of 24
18
Charging / low charge
The charge status is shown in the shaver display (5).
• During charging the respective charging segment (5b) will blink.
• When the shaver is fully charged and connected to an electrical outlet, all 3 charging
segments will light up for a few seconds. Then the display turns off.
• The battery symbol (5d) will flash red, when the battery is running low. You should be
able to finish your shave. With switching off the shaver a beep sound reminds of the
low charge status.
Using the shaver
Press the on/off switch (4) to operate the shaver.
Tips for a perfect dry shave
For best results, Braun recommends you to follow 3 simple steps:
1. Always shave before washing your face.
2. At all times, hold the shaver at the right angle (90°) to your skin.
3. Stretch your skin and shave against the direction of your beard growth.
MultiHeadLock switch (head lock)
To shave hard-to-reach areas (e.g. under the nose) slide the MultiHeadLock switch (3)
down to lock the shaver head. The shaver head can be locked in five positions.
To change position, move the shaver head with your thumb and forefinger back or forth.
It will automatically click into the next position.
For automatic cleaning in the Clean&Charge Station the head lock should be released.
Long hair trimmer
To trim sideburns, moustache or beard press the release button (8) and slide the long
hair trimmer (6) upwards.
Travel lock
• The lock symbol (5a) lights up in the display when the shaver has been locked to
avoid unintended starting of the motor (e.g. for storing it in a suitcase).
• Activation: By pressing the on/off switch (4) for 3 seconds the shaver is locked. This is
confirmed by a beep sound and the lock symbol in the display. Afterwards the display
turns off.
• Deactivation: By pressing the on/off switch for 3 seconds again the shaver is
unlocked.
Manual cleaning of the shaver
Cleaning under running water
• Switch on the shaver (cordless) and rinse the shaver head under hot running
water until all residues have been removed. You may use liquid soap without
abrasive substances. Rinse off all foam and let the shaver run for a few more
seconds.
91136113_Series_5-2_wd_China_S6-24.indd 1891136113_Series_5-2_wd_China_S6-24.indd 18 21.11.16 11:1321.11.16 11:13
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 18 of 24
19
• Next, switch off the shaver, press the release button (2) to remove the Foil & Cutter
cassette (1) and let it dry.
• If you regularly clean the shaver under water, then once a week apply a drop of light
machine oil on top of the Foil & Cutter cassette.
The shaver should be cleaned after each foam usage.
Cleaning with a brush
• Switch off the shaver. Remove the Foil & Cutter cassette (1) and tap it out on a flat
surface. Using the brush, clean the inner area of the pivoting head. Do not clean the
cassette with the brush as this may damage it!
Clean&Charge Station (C&C) (not with all models)
The Clean&Charge Station has been developed for cleaning, charging, lubricating,
disinfecting, drying and storing your Braun shaver.
13 Station power socket
14 Lift button for cartridge exchange
15 Station-to-shaver contacts
16 Clean&Charge Station display
16 a Level indicator
16 b Status light
16 c Cleaning program indicators
17 Start button
18 Cleaning cartridge
Installing the C&C
• Remove the protection foil from the C&C display.
• Press the lift button (14) at the rear side of the C&C to lift up the housing.
• Hold the cleaning cartridge (18) down on a flat, stable surface (e.g. table).
• Carefully remove the lid from the cartridge.
• Slide the cartridge from the rear side into the base of the station until it snaps into place.
• Slowly close the housing by pushing it down until it locks.
• Using the special cord set (10), connect the station power socket (13) to an electrical
outlet.
Using the C&C
Important: The shaver needs to be dry and free from any foam or soap residue!
Insert the shaver in the C&C upside down, with the front showing and released head
lock (3).
The contacts (7) on the back of the shaver need to align with the contacts (15) in the
C&C. Push the shaver in the correct position. A beep sound confirms that the shaver
sits properly in the C&C.
The C&C analyzes the hygiene status. The status is shown by the cleaning program
indicators (16c) in the C&C display (16).
91136113_Series_5-2_wd_China_S6-24.indd 1991136113_Series_5-2_wd_China_S6-24.indd 19 21.11.16 11:1321.11.16 11:13
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 19 of 24
20
Charging the shaver in the C&C
Charging will start automatically when the shaver has been placed in properly.
Cleaning the shaver in the C&C
When the cleaning indicator (5c) lights up in the shaver display, insert the shaver into
the C&C, as described above.
Cleaning programs
short economical cleaning
normal level of cleaning
high intensive cleaning
Start automatic cleaning
Start the cleaning process by pressing the start button (17). If status light (16b) does
not shine (C&C switches to stand-by after ca. 10 minutes), press start button twice.
Otherwise cleaning will not start. For best shaving results, we recommend cleaning
after each shave.
Each cleaning program consists of several cycles, where cleaning fluid is flushed
through the shaver head. Depending on your Clean&Charge Station model and/or
program selected, the cleaning time takes up to 3 minutes. During this time the status
light blinks. Leave the shaver in the station for drying. It takes several hours until
remaining moisture evaporates depending on the climatic conditions.
After completing the cleaning and charging procedure, all indicators turn off.
Removing the shaver from the C&C
Hold the C&C with one hand and tilt the shaver slightly to the front to release it.
Cleaning cartridge / Replacement
When the level indicator (16a) lights up permanently red, the remaining fluid in the
cartridge is sufficient for about 3 more cycles. When the level indicator blinks red, the
cartridge needs to be replaced – about every 4 weeks when used daily.
After having pressed the lift button (14) to open the housing, wait for a few seconds
before removing the used cartridge to avoid any dripping. Before discarding the used
cartridge, make sure to close the openings using the lid of the new cartridge, since the
used cartridge will contain contaminated cleaning solution.
The hygienic cleaning cartridge contains ethanol or isopropanol (specification see
cartridge), which once opened will naturally evaporate slowly. Each cartridge, if not
used daily, should be replaced after approximately 8 weeks to ensure optimal
disinfection. The cleaning cartridge also contains lubricants for the shaving system,
91136113_Series_5-2_wd_China_S6-24.indd 2091136113_Series_5-2_wd_China_S6-24.indd 20 21.11.16 11:1321.11.16 11:13
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 20 of 24
21
which may leave residual marks on the outer foil frame and the cleaning chamber of the
C&C. These marks can be removed easily by wiping gently with a damp cloth.
Accessories
Braun recommends changing your shaver’s Foil & Cutter cassette every 18 months to
maintain your shaver’s maximum performance.
Available at your dealer or Braun Service Centres:
• Foil & Cutter cassette: 52S/52B
• Cleaning Cartridge: CCR
• Braun Shaver cleaner spray
Environmental notice
Product contains batteries and/or recyclable electric waste. For environment
protection do not dispose of in household waste, but for recycling take to electric
waste collection points provided in your country.
The cleaning cartridge can be disposed of with regular household waste.
Subject to change without notice.
For electric specifications, see printing on the special cord set.
Trouble-Shooting
Problem Possible reason Remedy
SHAVER
Shaver does
not charge
completely and
keeps blinking.
Ambient temperature is
out of valid range.
Recommended ambient temperature for
charging is 5 °C to 35 °C.
Charging does
not start when
connected to
power socket.
1. Sometimes charging
could start delayed
(e.g. after long
storage).
2. Ambient temperature
is out of valid range.
3. Special cord set is not
plugged in properly.
1. Wait a few minutes, if charging will
start automatically.
2. Recommended ambient temperature
for charging is 5 °C to 35 °C.
3. Special cord set needs to snap into
place.
91136113_Series_5-2_wd_China_S6-24.indd 2191136113_Series_5-2_wd_China_S6-24.indd 21 21.11.16 11:1321.11.16 11:13
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 21 of 24
22
Unpleasant
smell from the
shaver head.
1. Shaver head is cleaned
with water.
2. Cleaning cartridge is
in use for more than
8 weeks.
1. When cleaning the shaver head with
water only use hot water and from time
to time some liquid soap (without
abrasive substances). Remove
Foil & Cutter cassette to let it dry.
2. Change cleaning cartridge at least
every 8 weeks.
Battery
performance
dropped
significantly.
1. Foil and cutter are
worn which requires
more power for each
shave.
2. Shaver head is
regularly cleaned
with water but not
lubricated.
1. Renew Foil & Cutter cassette.
2. If the shaver is regularly cleaned with
water, apply a drop of light machine oil
on top of the foil once a week for
lubrication.
Shaving
performance
dropped
significantly.
1. Foil and cutter are
worn.
2. Shaving system is
clogged.
1. Renew Foil & Cutter cassette.
2. Soak the Foil & Cutter cassette into hot
water with a drop of dish liquid.
Afterwards rinse it properly and tap it
out. Once dry apply a drop of light
machine oil on the foil.
Shaver head is
damp.
1. Drying time after
automatic cleaning
was too short.
2. Drain of the
Clean&Charge Station
is clogged.
1. Clean directly after shaving to allow
enough time for drying.
2. Clean the drain with a wooden
toothpick.
CLEAN&CHARGE STATION
Cleaning does
not start when
pressing the
start button.
1. Shaver is not placed
properly in the
Clean&Charge Station.
2. Cleaning cartridge
contains not enough
cleaning fluid (display
blinks red).
1. Insert shaver into the Clean&Charge
Station and push it to the rear side of
the station (contacts of the shaver
need to align with contacts in the
station).
2. Insert new cleaning cartridge.
Press start button again.
Increased
consumption of
cleaning fluid.
Drain of the Clean&
Charge station is
clogged.
– Clean the drain with a wooden
toothpick.
– Regularly wipe the tub clean.
91136113_Series_5-2_wd_China_S6-24.indd 2291136113_Series_5-2_wd_China_S6-24.indd 22 21.11.16 11:1321.11.16 11:13
CSS APPROVED Effective Date 23Nov2016 GMT - Printed 04Jan2017 Page 22 of 24