Chief FCA520 User Manual
Displayed below is the user manual for FCA520 by Chief which is a product in the Monitor Mount Accessories category. This manual has pages.
Related Manuals
INSTALLATION INSTRUCTIONS
Universal Clamp Accessory
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
FCA520
FCA520 Installation Instructions
2
DISCLAIMER
Legrand | AV and its affiliated corporations and subsidiaries
(collectively “Legrand | AV”), intend to make this manual
accurate and complete. However, Legrand | AV makes no claim
that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Legrand | AV
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Legrand | AV
assumes no responsibility for accuracy, completeness or
sufficiency of the information contained in this document.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all accessories are
properly assembled and installed using the instructions
provided.
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components placed on the FCA520 does not exceed 10 lbs
(13.6 kg).
WARNING: Use this accessory only for its intended use as
described in these instructions. Do not use attachments not
recommended by the manufacturer.
WARNING: Never operate this accessory if it is damaged.
Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this product outdoors.
WARNING: RISK OF INJURY TO PERSONS! Do not use
this accessory to support video equipment such as
televisions or computer monitors.
--SAVE THESE INSTRUCTIONS--
Installation Instructions FCA520
3
DIMENSIONS
LEGEND
DIMENSIONS: INCHES
[MILLIMETERS]
Tighten Fastener
Apretar elemento de fijación
Befestigungsteil festziehen
Apertar fixador
Serrare il fissaggio
Bevestiging vastdraaien
Serrez les fixations
Loosen Fastener
Aflojar elemento de fijación
Befestigungsteil lösen
Desapertar fixador
Allentare il fissaggio
Bevestiging losdraaien
Desserrez les fixations
Phillips Screwdriver
Destornillador Phillips
Kreuzschlitzschraubendreher
Chave de fendas Phillips
Cacciavite a stella
Kruiskopschroevendraaier
Tournevis à pointe cruciforme
FCA520 Installation Instructions
4
TOOLS REQUIRED FOR INSTALLATION
PARTS
#2
A (1)
[End bracket]
B (1)
[End bracket]
C (1)
[Retaining bracket]
D (1)
[Retaining bracket]
E (4)
1/4-20 weld nut F (4)
1/4"
G (2)
1/4-20
H (4)
10-24 x 3/8" J (6)
1/4-20 x 1/2"
K (4)
1"x1" hook & loop
Installation Instructions FCA520
5
ASSEMBLY
NOTE: The FCA520 may be assembled in various
configurations depending on size and configuration of
component to be placed on the FCA520. The following
guidelines should be used when determining desired
configuration:
• Always use two fasteners when connecting
end brackets (A, B) to retaining brackets (C,
D). (See Examples 1 and 2)
• May use two end brackets (A, B) without
retaining brackets (C, D) ONLY if component
can be attached directly to the end brackets
with included hardware. (See Example 3)
• Ensure that component is attached to brackets
AT MINIMUM by using the hook and loop
pieces (K).
1. Attach one retaining bracket (C) to one end bracket (A)
using two 10-24 x 3/8" Phillips pan machine screws (H).
(See Figure 1)
2. Repeat Step 1 for remaining retaining bracket (D) and end
bracket (B). (See Figure 1)
Figure 1
3. OPTIONAL: Attach component directly to end brackets (A,
B) using screws and nuts (not included). (See Figure 2)
Figure 2
INSTALLATION
1. Insert four 1/4-20 weld nuts (E) into slot in mount extrusion.
(See Figure 3)
Figure 3
1
(D)
(A)
(H) x 4
2
Example 1
Example 2
(C)
Example 3
x 2
3
(A)
(B)
(Hardware not included)
(E) x 4
Extrusion
slot
1
FCA520 Installation Instructions
6
2. Attach configured brackets to weld nuts using four
1/4-20 x 1/2" Phillips pan head screw (J) and four 1/4" flat
washers (F) into installed weld nuts (E). (See Figure 4)
Figure 4
3. Put hook and loop squares (K) together to form two
squares.
4. Remove paper from one side of both squares.
5. Attach hook and loop squares to brackets. (See Figure 5)
6. Remove paper from hook and loop squares and place
component on brackets, pressing it against hook and loop
squares. (See Figure 5)
Figure 5
7. OPTIONAL (attaching power strip): Attach power strip
(not included) to bracket assemblies through slots in
retaining brackets and in power strip using two 1/4-20 x 1/2"
Phillips head screws (J) and two hex nuts with flange (G).
(See Figure 6)
Figure 6
weld nuts
2
(J) x 4
(F) x 4
6
(K) x 2
5
Top view
Bracket
Power
strip
(J) through
bracket and
power strip
2
(J) x 2
(G) x 2
Installation Instructions FCA520
7
USA/International A 6436 City West Parkway, Eden Prairie, MN 55344
P800.582.6480 / 952.225.6000
F877.894.6918 / 952.894.6918
Europe A Franklinstraat 14, 6003 DK Weert, Netherlands
P+31 (0) 495 580 852
F+31 (0) 495 580 845
Asia Pacific A Office No. 918 on 9/F, Shatin Galleria
18-24 Shan Mei Street
Fotan, Shatin, Hong Kong
P852 2145 4099
F852 2145 4477
FCA520 Installation Instructions
8800-002259 Rev02
2019 Legrand | AV
www.legrandav.com
01/19