Chief FCASCA User Manual
Displayed below is the user manual for FCASCA by Chief which is a product in the Monitor Mount Accessories category. This manual has pages.
Related Manuals
I N S T A L L A T I O N I N S T R U C T I O N S
(with TS118SU)
Structural Column Adapter
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
FCASCA
FCASCA Installation Instructions
2
DISCLAIMER
Legrand | AV and its affiliated corporations and subsidiaries
(collectively “Legrand | AV”), intend to make this manual
accurate and complete. However, Legrand | AV makes no claim
that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Legrand | AV
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Legrand | AV
assumes no responsibility for accuracy, completeness or
sufficiency of the information contained in this document.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure al accessories are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this accessories can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this accessory is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
accessory.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to accessory does not exceed the
weight limit of the mount to which it is attached.
WARNING: Use this accessory only for its intended use as
described in these instructions. Do not use attachments not
recommended by the manufacturer.
WARNING: Never operate this accessory if it is damaged.
Return the accessory to a service center for examination and
repair.
WARNING: Do not use this accessory outdoors.
IMPORTANT ! :
The FCASCA
accessory
is designed to be
mounted to concrete columns between 12-24" in diameter.
--SAVE THESE INSTRUCTIONS--
Installation Instructions FCASCA
3
DIMENSIONS
STRAP CUT TO LENGTH
ACCOMODATES COLUMN DIAMETERS:
12.00" - 24.00"
2.96
75.1
1.25 31.75
THRU ALL
MOUNT STYLE LENGTH (X)
MTMS1U 7.92"
MTMP1U 13.17"
TS118SU 1.99"
TS218SU 5.17"
FCASCA Installation Instructions
4
LEGEND
Tighten Fastener
Apretar elemento de fijación
Befestigungsteil festziehen
Apertar fixador
Serrare il fissaggio
Bevestiging vastdraaien
Serrez les fixations
Loosen Fastener
Aflojar elemento de fijación
Befestigungsteil lösen
Desapertar fixador
Allentare il fissaggio
Bevestiging losdraaien
Desserrez les fixations
Phillips Screwdriver
Destornillador Phillips
Kreuzschlitzschraubendreher
Chave de fendas Phillips
Cacciavite a stella
Kruiskopschroevendraaier
Tournevis à pointe cruciforme
Open-Ended Wrench
Llave de boca
Gabelschlüssel
Chave de bocas
Chiave a punte aperte
Steeksleutel
Clé à fourche
By Hand
A mano
Von Hand
Com a mão
A mano
Met de hand
À la main
Hex-Head Wrench
Llave de cabeza hexagonal
Sechskantschlüssel
Chave de cabeça sextavada
Chiave esagonale
Zeskantsleutel
Clé à tête hexagonale
Pencil Mark
Marcar con lápiz
Stiftmarkierung
Marcar com lápis
Segno a matita
Potloodmerkteken
Marquage au crayon
Drill Hole
Perforar
Bohrloch
Fazer furo
Praticare un foro
Gat boren
Percez un trou
Adjust
Ajustar
Einstellen
Ajustar
Regolare
Afstellen
Ajuster
Remove
Quitar
Entfernen
Remover
Rimuovere
Verwijderen
Retirez
Optional
Opcional
Optional
Opcional
Opzionale
Optie
En option
Security Wrench
Llave de seguridad
Sicherheitsschlüssel
Chave de segurança
Chiave di sicurezza
Veiligheidssleutel
Clé de sécurité
Installation Instructions FCASCA
5
TOOLS REQUIRED FOR INSTALLATION
PARTS
1/2" (12.7mm)
3/16" (included)
5/32" (included)
metal cutting tool
D (2)
[Column clamp]
Hardware bag (A section)
AA (4) AB (4)
Hardware bag (B section)
5/16-18 x 7/8"
AC (4)
.750x.350x.060
BA (2) BB (2)
1/4-20 x 7/8"
BC (2)
.563x.280x.060
3/16"
5/32"
Hardware bag (C section)
CA (4)
5/16-18 x 7/8"
CB (2)
.750x.350x.060 CC (4)
5/16-18 CD (2)
5/16-18 x 3"
E (2)
[Column strap]
F (1)
[10’ Magnetic Tape]
FCASCA Installation Instructions
6
Assembly And Installation
1. Cut column straps (E) to length based on size of structural
column. See table below for details.
NOTE: If structural column is not one of these exact diameters,
it will be necessary to temporarily install strap around
column to determine where it should be cut.
2. Use two 5/16-18 x 7/8" button head cap screws (CA) and
two 5/16-18 hex nuts (CC) to attach column strap (E) to
column clamp (D). (See Figure 1)
Figure 1
3. Wrap strap around column at desired mounting height. (See
Figure 2)
4. Use 5/16-18 x 3" hex head carriage screw (CD) and
.750x.350x.060 spacers (CB) to secure strap around
column. Tighten to a torque rating of 75 inch pounds. (See
Figure 2)
Figure 2
Thinstall Mounts (TS118/218/318) and FMSWM
NOTE: If installing to MTMS1U or MTMP1U, proceed to
MTMS1U/MTMP1U section.
5. Loosely install appropriate hardware (AA and AB) or (BA
and BB) to appropriate mounting hole in top column clamp
(D). (See Figure 3) or (See Figure 4)
6. Hang mount onto loosely installed screw and tighten screw.
7. Install lower column clamp (D) following Steps 1-4, aligning
it with the lower mounting hole on mount. (See Figure 3) or
(See Figure 4)
8. Use appropriate hardware (AA and AB) or (BA and BB) to
secure mount to lower column clamp (D). (See Figure 3) or
(See Figure 4)
Diameter Strap Length
12" 32"
18" 47.5"
24" 65"
2
(CA) x 2
2
(CC) x 2
(E)
(D)
3
4
(CD)
(CB)
Figure 3
TS118 TS218 TS318
(BA)
(BA)
(BB)
5
6
7
8
(
(BB)
(BA)
(BA)
(BB)
6
8
(BB)
5
7
(AA)
(AA)
(AB)
6
8
(AB)
5
7
Installation Instructions FCASCA
7
Figure 4
MTMP1U/MTMS1U
9. Use two 5/16-18 x 7/8" button head cap screws (AA) and
two .750x.350x.060 spacers (AB) to secure mount to top
column clamp (D). (See Figure 5)
Figure 5
10. Install lower column clamp (D) following Steps 1-4, aligning
it with the lower mounting hole on mount. (See Figure
NOTE:)
11. Use two 5/16-18 x 7/8" button head cap screws (AA) and
two .750x.350x.060 spacers (AB) to secure mount to lower
column clamp (D). (See Figure NOTE:)
Figure 6
NOTE: Magnetic tape (F) may be used to cover holes on strap
(E) after installation.
(AA)
(AA)
(AB)
6
8
(AB)
5
7
FWMSWM
(AA)
9
(AB)
MTMS1U
(AA)
9
(AB)
MTMP1U
10
(AA)
11
(AB) x 2
MTMS1U
MTMP1U
10
(AA)
11
(AB) x 2
FCASCA Installation Instructions
USA/International A 6436 City West Parkway, Eden Prairie, MN 55344
P800.582.6480 / 952.225.6000
F877.894.6918 / 952.894.6918
Europe A Franklinstraat 14, 6003 DK Weert, Netherlands
P+31 (0) 495 580 852
F+31 (0) 495 580 845
Asia Pacific A Office No. 918 on 9/F, Shatin Galleria
18-24 Shan Mei Street
Fotan, Shatin, Hong Kong
P852 2145 4099
F852 2145 4477
8800-003123 Rev01
2019 Legrand | AV
www.legrandav.com
03/19