Chief FHB5164 User Manual
Displayed below is the user manual for FHB5164 by Chief which is a product in the Signage Display Mount Accessories category. This manual has pages.
Related Manuals
I N S T A L L A T I O N I N S T R U C T I O N S
Instrucciones de instalación
Installationsanleitung
Instruções de Instalação
Istruzioni di installazione
Installatie-instructies
Instructions d´installation
Flat Panel Adapter
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
FHB-5164
FHB-5164 Installation Instructions
2
DISCLAIMER
Legrand | AV and its affiliated corporations and subsidiaries
(collectively “Legrand | AV”), intend to make this manual
accurate and complete. However, Legrand | AV makes no claim
that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Legrand | AV
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Legrand | AV
assumes no responsibility for accuracy, completeness or
sufficiency of the information contained in this document.
Chief® is a registered trademark of Legrand AV Inc.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to the FHB-5164 accessory up to
(and including) the display does not exceed the weight
capacity of the mount to which it is attached.
WARNING: Use this accessory only for its intended use as
described in these instructions. Do not use attachments not
recommended by the manufacturer.
WARNING: Never operate this accessory if it is damaged.
Return the accessory to a service center for examination and
repair.
WARNING: Do not use this product outdoors.
--SAVE THESE INSTRUCTIONS--
DIMENSIONS
Installation Instructions FHB-5164
3
TOOLS / PARTS FOR INSTALLATION
A (2)
[Adapter
Bracket]
B (4)
M8 x 35mm
C (4)
M8x12mm
TV mount’s
installation
instructions
ASSEMBLY AND INSTALLATION
NOTE: The FHB-5164 is designed to be used with any Chief®
mount with flat upright brackets to add an offset up to
3.43" (87.2mm) from non-centered M8 VESA patterns.
It CANNOT be used with mounts using mounting
buttons.
1. Install mount to wall following mount’s installation instruction
up to the point of installing the display to the mount.
IMPORTANT ! : Depending on hole depth, a different
length of screw (not provided) may be needed rather than
the M8 x 35mm screws (B) to attach brackets to display.
2. Use M8 x 35mm (or appropriate length) Phillips pan
machine screws (B) to attach adapter brackets (A) to back
of display. (See Figure 1)
Figure 1
3. Use four M8 x 12mm Phillips pan machine screws (C) to
secure mount’s interface brackets to adapter brackets (A).
(See Figure 2)
NOTE: Some models will need to have interface brackets
assembled prior to connection to brackets.
Figure 2
4. Complete the installation following the mount installation
instructions.
2
(B) x 4
(A) x 2
(Low hole pattern shown)
(A) x 2
3
(C) x 4
(Chief® XSD1U interface
brackets [not included]
shown)
(High hole pattern shown)
USA/International A 6436 City West Parkway, Eden Prairie, MN 55344
P800.582.6480 / 952.225.6000
F877.894.6918 / 952.894.6918
Europe A Franklinstraat 14, 6003 DK Weert, Netherlands
P+31 (0) 495 580 852
F+31 (0) 495 580 845
Asia Pacific A Office No. 918 on 9/F, Shatin Galleria
18-24 Shan Mei Street
Fotan, Shatin, Hong Kong
P852 2145 4099
F852 2145 4477
FHB-5164 Installation Instructions
8800-003229 Rev00
2020 Legrand | AV
www.legrandav.com
11/20