Chief HB32B User Manual
Displayed below is the user manual for HB32B by Chief which is a product in the Projector Mount Accessories category. This manual has pages.
Related Manuals
8803-000104
12/07
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
HB-32B
VIDEO PROJECTOR CEILING MOUNT
FOR DIGITAL PROJECTION TITAN SERIES,
The Chief HB32B video projector ceiling mount is designed to provide fast, simple and secure installation of the Barco
CLM10+. Special roll, pitch, yaw and horizontal adjustments simplify projection positioning for image alignment. The
H B3 2B mou nt als o has p ositive reg is tr at ion lock s o that the p rojec tor ma y be rem oved w ithout los ing pr ojector mou nt
registration.
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL
INJURY! All components must be securely fastened to each other and to the ceiling, AND
the ceiling MUST be capable of supporting 5 times the total weight of the installation. If it
cannot, the ceili ng MUST be reinforced.
Unpack and check contents:
(1) Deluxe ceiling mount housing assembly. (3) M10 Washers, Flat
(1) Panasonic mounting bracket (3) M10 x 1.5 x 50mm, bolt
(4) 5/16” Flange Nuts (6) .5” x .257” x .625” nylon spacers
INSTALLATION INSTRUCTIONS
1. Turn your projector upside down.
2. P lace the thr ee 5/8 ” ta ll nylon s pac er s on t he b ott om of your p rojec tor and s ta ck the s ec ond t hree on top of the
fist ones so they are two spacers tall.
3. Place the Barco custom mounting br acket over on these nylon spacers on the bottom of your projector lining up
with the three threaded inserts in the bottom of the projector with the three holes in the bracket.
4. Slide the (3) M10 washers, one on each (3) M10 x 50mm bolt and install them into the three threaded inserts in
the projector. Securely tighten all three mounting bolts at this time.
4. Be sure that the method of support you are using for the VCM ceiling mount is securely installed to the ceiling.
If not, the ceiling must be reinforced. Improper installation may result in serious personal injury.
5. Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the
screen.
PRECAUTION: Installing a ceiling mount requires the presence of two persons familiar with
mechanical installations. A third assistant is recommended.
6. With the help of your assistants, lift the projector and install it to the four s tuds extending from the mounting
plate. Be sure the Panasonic mounting plate is seated in slots. Tighten securely using the (4) 5/16” flange
nuts.
For projector alignment see attached sheet.