Chief HB73P User Manual
Displayed below is the user manual for HB73P by Chief which is a product in the Projector Mount Accessories category. This manual has pages.
Related Manuals
INSTALLATION INSTRUCTIONS
Milestone AV Technolo gies, Inc., and its affiliated corporati ons and subs idiaries ( collectively, "Milest one"), i ntend to mak e this manual a ccurate and complet e. However, Mileston e
makes no claim that the information co ntai ned herein co vers all details, c onditions or variations , nor does it prov ide for every pos sible contingenc y in connection with the i nsta llation
or u se of thi s product . The i nformati on contai ned in t his doc ument is s ubje ct to change withou t noti ce or obl igation of any k ind. Miles tone m akes no r eprese ntation of warran ty, ex-
pressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy , completeness o r sufficiency of the information contained in this doc-
ument.
© 2008 Chief Manufacturing, 8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
8803-000109
2/26/08
MO DEL: HB-73P Custom Projector Bracket
Unpack carton and verify contents. If any listed parts are missing, immediately contact a Chief Customer Service representative by calling
1-800-582-6480. PARTS
Figure 1:
INSTALLATION
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJUR Y! All components mu st be securely fastened
to each other and to the ceiling, and the ceiling must be capable of supporting five times the total weight of the installation.
1. Lower custom HB bracket onto projector. Ensure that small triangle on bracket faces front of projector. (See Figure 1)
2. Attach HB bracket to projector using four M10 x 20mm hex head screws and four M10 flat washers. (See Figure 1)
Continued...
(1) BRACKET, Custom HB (4) NUT, Flange, Hex, 5/16-18
(4) SCREW, Hex Head, M10 x 20mm (4) WASHER, Flat, M10
1
Triangle
toward front
of projector
2
x 4
INSTALLATION INSTRUCTIONS
Continued
CAUTION: Installing a ceiling mount requires the presence of two persons familiar with mechanical installations. A third assistant is
recommended.
Figure 2:
3. Attach VCM housing to your method of support and tighten firmly so the VCM housing is square to the screen.
4. With hel p of a ssistants, lift the projector and i nst all it to t he fo ur st uds ext endi ng fr om the VCM hous ing . Ensur e that the VCM hou sing is
seated in slots on HB bracket. (See Figure 2)
5. Tighten the four 5/16" flange nuts. (See Figure 2)
4
5
VC M H ous ing
x 4
Seat VCM in HB
bracket slots