Chief HSPS User Manual
Displayed below is the user manual for HSPS by Chief which is a product in the Mounting Kits category. This manual has pages.
Related Manuals
I N S T A L L A T I O N I N S T R U C T I O N S
Printer Accessory
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
HSPS
HSPS Installation Instructions
2
DISCLAIMER
Legrand | AV and its affiliated corporations and subsidiaries
(collectively “Legrand | AV”), intend to make this manual
accurate and complete. However, Legrand | AV makes no claim
that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Legrand | AV
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Legrand | AV
assumes no responsibility for accuracy, completeness or
sufficiency of the information contained in this document.
Chief® is a registered trademark of Legrand AV Inc.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all mounting systems
are properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this mounting system can result in serious personal injury
or damage to equipment! It is the installer’s responsibility to
make sure the structure to which this mounting system is
attached can support five times the combined weight of all
equipment. Reinforce the structure as required before
installing the mounting system.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to accessory does not exceed 3 lbs
(1.36 kg).
WARNING: Use this accessory only for its intended use as
described in these instructions. Do not use attachments not
recommended by the manufacturer.
WARNING: Never operate this accessory if it is damaged.
Return the accessory to a service center for examination and
repair.
WARNING: Do not use this accessory outdoors.
WARNING: RISK OF INJURY TO PERSONS! Do not use
this accessory to support video equipment such as
televisions or computer monitors.
--SAVE THESE INSTRUCTIONS--
DIMENSIONS
Installation Instructions HSPS
3
TOOLS/PARTS REQUIRED FOR INSTALLATION
1/8"
A (1)
[Printer accessory]
B (4)
#6-32 x 1/2"
C (4)
#6-32
#2
Assembly And Installation
1. Assemble Tablet Stand following installation instructions of
the stand until the Column-mounted tablet is ready to be
installed to the column.
2. Use column-mounted tablet nut (provided with column-
mounted tablet) to install printer accessory (A) and column-
mounted tablet to column. (See Figure 1)
Figure 1
3. Complete installation of tablet stand referring to the
installation instructions for the tablet stand.
Printer Installation
1. Install four #6-32 x 1/2" Phillips pan machine screws (B) and
four #6-32 lock nuts (C) to printer accessory (A). (See Figure
2)
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to accessory does not exceed 3 lbs
(1.36 kg).
2. Install printer (not included) onto four installed screws (B).
on printer accessory (A). (See Figure 2)
Figure 2
(A)
2
column-mounted
tablet nut
(not included)
column-mounted
(not included)
tablet
2
1
(B) x 4
(C) x 4
1
HSPS Installation Instructions
USA/International A 6436 City West Parkway, Eden Prairie, MN 55344
P800.582.6480 / 952.225.6000
F877.894.6918 / 952.894.6918
Europe A Franklinstraat 14, 6003 DK Weert, Netherlands
P+31 (0) 495 580 852
F+31 (0) 495 580 845
Asia Pacific A Office No. 918 on 9/F, Shatin Galleria
18-24 Shan Mei Street
Fotan, Shatin, Hong Kong
P852 2145 4099
F852 2145 4477
8800-003239 Rev01
2020 Legrand | AV
www.legrandav.com
09/2020