Chief HTSTS User Manual
Displayed below is the user manual for HTSTS by Chief which is a product in the Multimedia Carts & Stands category. This manual has pages.
Related Manuals
I N S T A L L A T I O N I N S T R U C T I O N S
Column-mounted Tablet Floor Stand
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
HTSTS
HTSTS Installation Instructions
2
DISCLAIMER
Legrand | AV and its affiliated corporations and subsidiaries
(collectively “Legrand | AV”), intend to make this manual
accurate and complete. However, Legrand | AV makes no claim
that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Legrand | AV
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Legrand | AV
assumes no responsibility for accuracy, completeness or
sufficiency of the information contained in this document.
Chief® is a registered trademark of Legrand AV Inc.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all mounting systems
are properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this mounting system can result in serious personal injury
or damage to equipment! It is the installer’s responsibility to
make sure the structure to which this mounting system is
attached can support five times the combined weight of all
equipment. Reinforce the structure as required before
installing the mounting system.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components and accessories attached to mounting
system does not exceed 10 lbs (4.5 kg).
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this mounting system outdoors.
WARNING: RISK OF INJURY TO PERSONS! Do not use
this mounting system to support video equipment such as
televisions or computer monitors.
--SAVE THESE INSTRUCTIONS--
Installation Instructions HTSTS
3
DIMENSIONS
1.30
33.0
DEVICE MOUN TING HOLE
R.50
12.7
.25
6.4
HTSTS Installation Instructions
4
LEGEND
Tighten Fastener
Apretar elemento de fijación
Befestigungsteil festziehen
Apertar fixador
Serrare il fissaggio
Bevestiging vastdraaien
Serrez les fixations
Loosen Fastener
Aflojar elemento de fijación
Befestigungsteil lösen
Desapertar fixador
Allentare il fissaggio
Bevestiging losdraaien
Desserrez les fixations
Phillips Screwdriver
Destornillador Phillips
Kreuzschlitzschraubendreher
Chave de fendas Phillips
Cacciavite a stella
Kruiskopschroevendraaier
Tournevis à pointe cruciforme
Open-Ended Wrench
Llave de boca
Gabelschlüssel
Chave de bocas
Chiave a punte aperte
Steeksleutel
Clé à fourche
By Hand
A mano
Von Hand
Com a mão
A mano
Met de hand
À la main
Hex-Head Wrench
Llave de cabeza hexagonal
Sechskantschlüssel
Chave de cabeça sextavada
Chiave esagonale
Zeskantsleutel
Clé à tête hexagonale
Pencil Mark
Marcar con lápiz
Stiftmarkierung
Marcar com lápis
Segno a matita
Potloodmerkteken
Marquage au crayon
Drill Hole
Perforar
Bohrloch
Fazer furo
Praticare un foro
Gat boren
Percez un trou
Adjust
Ajustar
Einstellen
Ajustar
Regolare
Afstellen
Ajuster
Remove
Quitar
Entfernen
Remover
Rimuovere
Verwijderen
Retirez
Optional
Opcional
Optional
Opcional
Opzionale
Optie
En option
Security Wrench
Llave de seguridad
Sicherheitsschlüssel
Chave de segurança
Chiave di sicurezza
Veiligheidssleutel
Clé de sécurité
Installation Instructions HTSTS
5
TOOLS REQUIRED FOR INSTALLATION
PARTS
1/8"
(tabletop install ONLY)
(tabletop install ONLY)
A (1)
[Column]
B (1)
[Column cover]
C (4)
#10-24 x 5/8"
D (1)
1/8"
HTSTS Installation Instructions
6
Assembly And Installation
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components and accessories attached to mounting
system does not exceed 10 lbs (4.5 kg).
1. Use column-mounted tablet nut (provided with column-
mounted tablet) to install column-mounted tablet (not
included) to column (A). (See Figure 1)
Figure 1
2. Connect cord to bottom of column-mounted tablet. (See
Figure 2)
3. Partially install four #10-24 x 5/8" button head cap screws
(C) into column cover (B). (See Figure 2)
4. Insert column cover (B) into column (A) channel and place
four screws (C) into four holes on column cover (B). (See
Figure 3)
Figure 2
5. Slide column cover (B) up until screws (C) are properly
positioned into keyholes. (See Figure 3)
6. Tighten all four screws (C) to secure column cover (B) to
column (A). (See Figure 3)
Figure 3
1
column-mounted
tablet nut
(not included)
column-mounted
(not included)
tablet
(A)
3
(C) x 4
(A)
(partially install)
2
4
5
6
(C) x 4
(tighten)
(B)
(A)
Installation Instructions HTSTS
7
Bolt to Table (Optional)
The HTSTS mount may be bolted to the table for increased
security or stability. Hardware is NOT provided for this
installation.
IMPORTANT ! : Column cover (B) must be attached to
column (A) before being bolted to table.
1. Use column holes as a template to mark holes on table at
desired mounting location.
2. Drill holes at marked locations according to instructions of
hardware being used for installation. (See Figure 4)
3. Use hardware (not included) to secure base plates (D) to
floor. (See Figure 4)
Figure 4
12
3
x 3
HTSTS Installation Instructions
USA/International A 6436 City West Parkway, Eden Prairie, MN 55344
P800.582.6480 / 952.225.6000
F877.894.6918 / 952.894.6918
Europe A Franklinstraat 14, 6003 DK Weert, Netherlands
P+31 (0) 495 580 852
F+31 (0) 495 580 845
Asia Pacific A Office No. 918 on 9/F, Shatin Galleria
18-24 Shan Mei Street
Fotan, Shatin, Hong Kong
P852 2145 4099
F852 2145 4477
8800-003238 Rev00
2020 Legrand | AV
www.legrandav.com
09/2020