Chief NAS1S23 User Manual
Displayed below is the user manual for NAS1S23 by Chief which is a product in the Rack Accessories category. This manual has pages.
Related Manuals
INSTALLATION INSTRUCTIONS
Milestone AV Tec hnol ogie s, and its affiliated co rpo rat ions a nd subs idiaries (c ol lectiv el y, "Miles tone"), intend to make this ma nual ac cu rat e an d compl ete. However, Mi lestone makes
no claim that the in for mation con taine d h erein co vers all deta ils, con ditions or va ri atio ns, nor does i t provide for every pos sible contingency in connection with the installation or use
of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or
implied, regarding the information contained herein. Milestone as sumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
Chief Manufacturing, a products division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
8821-0 0202 3 R ev 00
©2010 Milestone AV Te chnologies,
a Duchossois Group Company
09/10
NAS1S23/28 SHELVES
The NAS1S23/28 shelves are designed for use with Chief® Raxxess S1 Series racks. See the specific installation instructions provided with
the rack for additional installation information .
TOOLS REQUIRED / PARTS INCLUDED
WARNING: FAILURE TO READ, THOROUGHLY UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS CAN RESULT IN SERIOUS
PERSONAL INJURY, DAMAGE TO EQUIPMENT, OR VOIDING OF FACTOR Y WARRANTY! It is the installer’s responsibility to make
sure all components are properly assembled and installed using the instructions provided.
WARNING: EXCEEDING THE WEIGHT CAPACITY CAN RESULT IN SERIOUS PERSO NAL INJURY OR DAMAGE TO
EQUIPMENT! It i s the in staller’s r esponsi bilit y to make sure t he combined weig ht of al l componen ts loc ated on eac h shel f does n ot ex ceed
250 lbs (113.4 kg).
A (1)
[Shelf]
B (2)
[Bracket]
C (4)
#4-1/4"
D (4)
1/4-20 x 1/2"
E (4)
#4-40 F (4)
1/4-20
NOTE: The optional brackets (B) may be attached to the shelf to
keep components from being pushed toward back of shelf.
1. Ali gn two bracket s (B), as requi red, onto shelf (A). (See Figur e 1)
2. Fasten brackets to shelf using four #4-40 x 1/4" studs (C) and
four #4-40 locknuts (E). (See Figure 1)
Figure 1
3. Attach shelf to rack using four 1/4-20 x 1/2" studs (D) and four
1/4-20 locknuts (F). (See Figure 2)
4. Attach additional shelves as required.
Figure 2
®Chief is a registered trademark of Milestone AV Technologies.
All rights reserved.
(A)
(B)
(E) x 4
2
(C) x 4
(B)
3
(A)
(D) x 4
(F) x 4