Chief PACLFB-B2B User Manual
Displayed below is the user manual for PACLFB-B2B by Chief which is a product in the Monitor Mounts & Stands category. This manual has pages.
Related Manuals
INSTALLATION INSTRUCTIONS
PACLFx PACLFx-B2B
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
PACLFx / PACLFx-B2B
55" to 40" Free-Standing Kiosk Base/
55" to 40" Free-Standing Kiosk Back-to-Back Base
PACLFx / PACLFx-B2B Installation Instructions
2
DISCLAIMER
Legrand | AV and its affiliated corporations and subsidiaries
(collectively “Legrand | AV”), intend to make this manual
accurate and complete. However, Legrand | AV makes no claim
that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Legrand | AV
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Legrand | AV
assumes no responsibility for accuracy, completeness or
sufficiency of the information contained in this document.
Chief® is a registered trademark of Legrand AV Inc.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all accessories are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this accessory can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this accessory is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
accessory.
WARNING: Use this accessory only for its intended use as
described in these instructions. Do not use attachments not
recommended by the manufacturer.
WARNING: Never operate this accessory if it is damaged.
Return the accessory to a service center for examination and
repair.
WARNING: Do not use this accessory outdoors.
--SAVE THESE INSTRUCTIONS--
Installation Instructions PACLFx / PACLFx-B2B
3
DIMENSIONS
PACLFx
DIMENSIONS: INCHES
[MILLIMETERS]
PACLFx-B2B
DIMENSIONS: INCHES
[MILLIMETERS]
PACLFx / PACLFx-B2B Installation Instructions
4
LEGEND
Tighten Fastener
Apretar elemento de fijación
Befestigungsteil festziehen
Apertar fixador
Serrare il fissaggio
Bevestiging vastdraaien
Serrez les fixations
Loosen Fastener
Aflojar elemento de fijación
Befestigungsteil lösen
Desapertar fixador
Allentare il fissaggio
Bevestiging losdraaien
Desserrez les fixations
Phillips Screwdriver
Destornillador Phillips
Kreuzschlitzschraubendreher
Chave de fendas Phillips
Cacciavite a stella
Kruiskopschroevendraaier
Tournevis à pointe cruciforme
Open-Ended Wrench
Llave de boca
Gabelschlüssel
Chave de bocas
Chiave a punte aperte
Steeksleutel
Clé à fourche
By Hand
A mano
Von Hand
Com a mão
A mano
Met de hand
À la main
Hex-Head Wrench
Llave de cabeza hexagonal
Sechskantschlüssel
Chave de cabeça sextavada
Chiave esagonale
Zeskantsleutel
Clé à tête hexagonale
Pencil Mark
Marcar con lápiz
Stiftmarkierung
Marcar com lápis
Segno a matita
Potloodmerkteken
Marquage au crayon
Drill Hole
Perforar
Bohrloch
Fazer furo
Praticare un foro
Gat boren
Percez un trou
Adjust
Ajustar
Einstellen
Ajustar
Regolare
Afstellen
Ajuster
Remove
Quitar
Entfernen
Remover
Rimuovere
Verwijderen
Retirez
Optional
Opcional
Optional
Opcional
Opzionale
Optie
En option
Security Wrench
Llave de seguridad
Sicherheitsschlüssel
Chave de segurança
Chiave di sicurezza
Veiligheidssleutel
Clé de sécurité
Installation Instructions PACLFx / PACLFx-B2B
5
TOOLS REQUIRED FOR INSTALLATION
PARTS
3/16"
(included)
3/16" hex bit
(included)
A (1)
[PACLFx Assembly] A (1)
[PACLFx-B2B Assembly]
OR
C (1)
3/16"
B (20)
5/16 x 1/2" D (1)
3/16" hex bit
PACLFx / PACLFx-B2B Installation Instructions
6
DISASSEMBLY OF SHIPPED PARTS
1. Remove the fasteners holding the base pieces together.
(See Figure 1)
IMPORTANT ! : Save the washers, and discard the
spacers and screws.
Figure 1
ASSEMBLY OF PACLFx / PACLFx-B2B
IMPORTANT ! : When assembling the base, the
fasteners are placed in different holes depending upon
whether you are using the PACLFx / PACLFx-B2B for a
48" - 40" kiosk or a 55" - 49" kiosk. (See Figure 4) and
(See Figure 5)
1. Place rectangular pieces of base on floor, lining up opening
area on each piece. (See Figure 2) and (See Figure 3)
2. Lower remaining section of base onto two rectangular
sections, lining up screw holes and opening as shown. (See
Figure 2) and (See Figure 3)
3. Insert sixteen 5/16 x 1/2" button head screws (B) into
highlighted holes and tighten.
Figure 2
Figure 3
PACLFx
PACLFx-B2B
1
x 4
1
x 4
Save washers
Save washers
(B) x 16
3
PACLFx
Opening
Opening
(B) x 16
3
PACLFx-B2B
Opening
Opening
Installation Instructions PACLFx / PACLFx-B2B
7
IMPORTANT ! : (See Figure 4) for 48" - 40" kiosks,
and (See Figure 5) for 55" - 49" kiosks.
Figure 4
Figure 5
Attaching Kiosk to Free-Standing Base
1. Place kiosk onto base, lining up mounting holes on kiosk
and base. (See Figure 4) and (See Figure 5)
Figure 6
2. Fasten kiosk to base using four 5/16 x 1/2" button head
screws (B) and washers removed in Step 1 of Disassembly
of Shipped Parts section. (See Figure 6)
3
(B) x 16
[PACLFx shown as example]
48" - 40" kiosks floor
base fastener
pattern
Kiosks attached
at these points on
each side of base
Class 55" - 49" kiosks
base fastener pattern
3
(B) x 16
[PACLFx-B2B shown as example]
Kiosks attached
at these points on
each side of base
2
(B) x 4
Washers x 4
PACLFx / PACLFx-B2B Installation Instructions
USA/International A 6436 City West Parkway, Eden Prairie, MN 55344
P800.582.6480 / 952.225.6000
F877.894.6918 / 952.894.6918
Europe A Franklinstraat 14, 6003 DK Weert, Netherlands
P+31 (0) 495 580 852
F+31 (0) 495 580 845
Asia Pacific A Office No. 918 on 9/F, Shatin Galleria
18-24 Shan Mei Street
Fotan, Shatin, Hong Kong
P852 2145 4099
F852 2145 4477
8800-003195 Rev00
2020 Legrand | AV
www.legrandav.com
05/2020