Chief PG4A User Manual
Displayed below is the user manual for PG4A by Chief which is a product in the Projector Cases category. This manual has pages.
Related Manuals
INSTALLATION INSTRUCTIONS
XXL Projector Guard
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
PG4A
PG4A Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively “Milestone”), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all accessories are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this accessory can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this accessory is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
accessory.
WARNING: Use this accessory only for its intended use as
described in these instructions. Do not use attachments not
recommended by the manufacturer.
WARNING: Never operate this accessory if it is damaged.
Return the accessory to a service center for examination and
repair.
WARNING: Do not use this accessory outdoors.
IMPORTANT ! :
The PG4A
accessory
is designed to be
attached to a 1-1/2" column.
IMPORTANT ! : These installation instructions assume
that a 1-1/2" diameter extension column (not included)
has been properly installed and is in place.
--SAVE THESE INSTRUCTIONS--
Installation Instructions PG4A
3
DIMENSIONS
LEGEND
Tighten Fastener
Apretar elemento de fijación
Befestigungsteil festziehen
Apertar fixador
Serrare il fissaggio
Bevestiging vastdraaien
Serrez les fixations
Loosen Fastener
Aflojar elemento de fijación
Befestigungsteil lösen
Desapertar fixador
Allentare il fissaggio
Bevestiging losdraaien
Desserrez les fixations
Security Wrench
Llave de seguridad
Sicherheitsschlüssel
Chave de segurança
Chiave di sicurezza
Veiligheidssleutel
Clé de sécurité
Hex-Head Wrench
Llave de cabeza hexagonal
Sechskantschlüssel
Chave de cabeça sextavada
Chiave esagonale
Zeskantsleutel
Clé à tête hexagonale
PG4A Installation Instructions
4
TOOLS REQUIRED FOR INSTALLATION
PARTS
5/32"
(security) - Included
A (1)
[PG4A]
B (2)
[Clamp]
C (4)
1/4-20 x 1/2"
D (4)
1/4"
E (4)
1/4-20 x 3/4"
F (1)
5/32"
G (4)
10-24 x 3/8"
(security)
(security)
Installation Instructions PG4A
5
INSTALLATION
IMPORTANT ! : These installation instructions assume
that a 1-1/2" diameter extension column (not included)
has been properly installed and is in place, along with the
projector.
NOTE: The PG4A (A) ships in its most compact configuration,
but can be adjusted to fit larger projectors.
1. Remove AND SAVE four fasteners (two from top and two
from bottom) from the front of the PG4A (A). (See Figure 1)
2. Remove front face of the PG4A. (See Figure 1)
Figure 1
3. Attach two clamps (B) to installed column using four
1/4-20 x 3/4" button head cap screws (E), two through each
clamp. (See Figure 2)
Figure 2
4. Slide the PG4A over the bottom flange of the installed
clamps (B). (See Figure 3)
5. Fasten PG4A to clamps through slots in PG4A with four
1/4-20 x 1/2" button head cap screws (C) and four 1/4"
washers (D). (See Figure 3)
Figure 3
6. Slide the front face of the PG4A back into the PG4A,
aligning the fastener holes on the front face with the
fastener holes at the selected cage size. (See Figure 4)
7. Fasten PG4A front face in place using four security button
head screws removed in Step 1, and four 10-24 x 3/8"
security button head screws (G). (See Figure 4)
Figure 4
1
2
x 4
Front face
(A)
[Projector not shown]
3
(E) x 2
3
(E) x 2
(B)
4
5
(C) x 4
(D) x 4
(B)
Slots
[Projector not shown]
(G) x 4
7
6
Adjustable fastener
locations circled
Front face [Projector not shown]
PG4A Installation Instructions
6
8. For added security, install a padlock (not included) in one of
the four locations noted. (See Figure 5)
NOTE: The padlock shackle diameter cannot exceed 3/8".
Figure 5
Padlock
locations
Padlock locations
on this side also
Installation Instructions PG4A
7
PG4A Installation Instructions
USA/International A 6436 City West Parkway, Eden Prairie, MN 55344
P800.582.6480 / 952.225.6000
F877.894.6918 / 952.894.6918
Europe A Franklinstraat 14, 6003 DK Weert, Netherlands
P+31 (0) 495 580 852
F+31 (0) 495 580 845
Asia Pacific A Office No. 918 on 9/F, Shatin Galleria
18-24 Shan Mei Street
Fotan, Shatin, Hong Kong
P852 2145 4099
F852 2145 4477
Chief, a products division of
Milestone AV Technologies
8800-003083 Rev00
2018 Milestone AV Technologies
www.milestone.com
08/18