Chief SLM200 User Manual
Displayed below is the user manual for SLM200 by Chief which is a product in the Projector Accessories category. This manual has pages.
Related Manuals
8802-000098 04/11/03
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
I
NSTALLATION
I
NSTRUCTIONS
SLB-200 H
ANGER
B
RACKET
for Mitsubishi LVP-X200,
Prior to assembly, unpack carton and verify contents.
For security installation, use security hardware package inside the ALL-POINTS™
Security Kit. Follow the instructions below for attaching the bracket to the projector
using either standard hardware or security hardware.
If you are missing any of the following components, please contact Customer Service at
1-800-582-6480
(1) SLB-200 Bracket (4) M6 - 12mm Screws
(6) 10 - 24 Thumb Nuts (4) M6 Flatwashers
I
NSTALLATION
I
NSTRUCTIONS
1. Turn projector upside down.
2. Remove the two front adjustable feet to expose the threaded inserts.
3. Place the SLB-200 bracket on to the bottom of the projector lining up the four slotted
mounting holes in the SLB-200 bracket with the four threaded inserts in the bottom of the
projector and secure using the M6 -12mm mounting screws and M6 Flatwashers.
CAUTION: When attaching the mount be careful not to over tighten screws.
4. See RPA and/or Smart-Lift™ Instructions.