Chief SLM520 User Manual
Displayed below is the user manual for SLM520 by Chief which is a product in the Projector Mount Accessories category. This manual has pages.
Related Manuals
8802-000100 04/11/03
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
I
NSTALLATION
I
NSTRUCTIONS
SLB-520 H
ANGER
B
RACKET
for Sharp PG-M20X, PG-M25X,
Prior to assembly, unpack carton and verify contents.
For security installation, use security hardware package inside the ALL-POINTS™
Security Kit. Follow the instructions below for attaching the bracket to the projector
using either standard hardware or security hardware.
If you are missing any of the following components, please contact Customer Service at
1-800-582-6480
(1) SLB-520 Bracket (3) M3 -16mm Flat Head Screw
(4) 10 - 24 Thumb Nuts (3) 1/2" x .218 x 1/4" Nylon Spacer
I
NSTALLATION
I
NSTRUCTIONS
1. Turn projector upside down.
2. Place the three ¼” nylon spacers over the three threaded inserts in the bottom of the
projector.
3. Place the SLB-520 bracket onto the three ¼” nylon spacers on the bottom of the projector
lining up the three mounting holes in the bracket with the three nylon spacers.
4. Using the three M3 x 16mm flat head screws, start them into the three threaded inserts
and tighten all fasteners at this time, securing the bracket to the projector. CAUTION:
When attaching the mount be careful not to overtighten screws.
5. See RPA and/or Smart-Lift™ Instructions.