Chief SLM8630 User Manual
Displayed below is the user manual for SLM8630 by Chief which is a product in the Projector Mount Accessories category. This manual has pages.
Related Manuals
SLB-8630 H
ANGER
B
RACKET
FOR
3M MP8630
Unpack carton and check contents:
(1) SLB-8630 Plate (2) U-Form Rod
(4) 10-24 Lock Nuts (4) #10 Flatwashers
(8) Felt Squares (6) Thumb Nuts
I
NSTALLATION
I
NSTRUCTIONS
1. Turn projector upside down.
2. Place the SLB-8630 Plate onto the projector bottom.
3. Attach the U-Form rods around the projector and up through the two holes in the
SLB-8630 plate using the #10 flatwashers and 10-24 nylock nuts. NOTE: The
U-Form rods MUST be attached for mount to properly support projector.
This is a correct fit. DO NOT OVERTIGHTEN U-Form rod to projector.
Only tighted until a secure fit is achieved. Felt squares are provided to
protect projector shell, if desired. They can be attached to the projector or
wrapped around the U-Form rod.
4. See RPA and/or Smart-Lift™ Instructions.
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com