Chief VCM76P User Manual
Displayed below is the user manual for VCM76P by Chief which is a product in the Projector Mounts category. This manual has pages.
Related Manuals
Milestone AV Technolo gies, Inc., and its affiliated corporati ons and subs idiaries ( collectively, "Milest one"), i ntend to mak e this manual a ccurate and complet e. However, Mileston e
makes no claim that the information contained herein co vers all detai ls, c ondi tions or variations, nor does it provide for ev ery possible c onti ngenc y in connection with th e installation
or u se of thi s product . The i nformati on contai ned in t his doc ument is s ubje ct to change withou t noti ce or obl igation of any k ind. Miles tone m akes no r eprese ntation of warran ty, ex-
press ed or implied, regar ding the information conta ined herei n. Milestone assume s no respo nsibility for accuracy, completenes s or sufficiency of t he information contai ned in this
document.
Chief, a products division of Milestone AV Technologies
6436 City West Parkway, Eden Prairie, MN 55344
• P: 800.582.6480 / 952.225.6000 • F:877.894.6918 / 952.894.6918
8800-0 0271 8 R ev 00
©2015 Milestone AV Technologies
02/15
INSTALLATION INSTRUCTIONS
Continued. . .
MO DEL: HB-76P Custom Projector Bracket
Unpack carton and verify contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.
PARTS
Figure 1
INSTALLATION
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY! All components must b e securely fastened
to each other and to the ceiling, and the ceiling must be capable of supporting five times the total weight of the installation.
1. Turn projector upside down on a flat surface.
2. Lower custom HB bracket onto bottom of projector. Ensure that triangle in bracket points toward front of projector. (See Figure 1)
3. Attach HB bracket to projector using five M6 x 10mm Phillips pan head screws through five holes in the HB bracket. (See Figure 1)
(1) BRACKET, Custom HB (5) WA SHE R , Fla t, M6
(4) NUT, Flange, Hex, 5/16-18 (5) SCREW, Phillips Pan Head, M6 x 10mm
1
2
x 4
INSTALLATION INSTRUCTIONS
Continued . .
CAUTION: Installing a ceiling mount requires the presence of two persons familiar with mechanical installations. A third assistant is
recommended.
Figure 2
4. Attach VCM housing to your method of support and tighten firmly so the VCM housing is square to the screen.
5. With hel p of a ssistants, lift the projector and i nst all it to t he fo ur st uds ext endi ng fr om the VCM hous ing . Ensur e that the VCM hou sing is
seated in slots on HB bracket. (See Figure 2)
6. Tighten the four 5/16" flange nuts. (See Figure 2)
4
5
VCM Housing
x 4
Seat VCM in HB
bracket slots