Table of Contents
- Dell Venue 10 Pro – 5055 User’s Guide
- Working on Your Tablet
- Features
- Setting Up Your Tablet
- Using Your Tablet
- Managing your tablet settings
- Synchronizing your tablet
- Getting Your Stylus Ready for Use
- Docking Your Tablet to the Keyboard Dock
- Cleaning Your Tablet
- Troubleshooting
- System Setup
- Technical Specifications
- Contacting Dell
DELL 10 Pro 5056 User Manual
Displayed below is the user manual for 10 Pro 5056 by DELL which is a product in the Tablets category. This manual has pages.
Related Manuals
Dell Venue 10 Pro – 5055
User’s Guide
Regulatory Model: T14G
Regulatory Type: T14G001
Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you
how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Copyright © 2015 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and
intellectual property laws. Dell™ and the Dell logo are trademarks of Dell Inc. in the United States and/or other
jurisdictions. All other marks and names mentioned herein may be trademarks of their respective companies.
2015 -01
Rev. A00
Contents
1 Working on Your Tablet.......................................................................................5
Before Working Inside Your Tablet.......................................................................................................5
Turning off Your Tablet.........................................................................................................................6
2 Features.................................................................................................................. 8
3 Setting Up Your Tablet.......................................................................................10
Charging the Tablet.............................................................................................................................10
Turning On Your Tablet....................................................................................................................... 11
Turning off the Screen.........................................................................................................................12
Using power buttonUsing Charms............................................................................................... 12
4 Using Your Tablet............................................................................................... 13
Screen Orientation.............................................................................................................................. 13
How to lock / unlock the screen orientation..................................................................................... 13
Adjusting the screen brightness....................................................................................................13
Gestures...............................................................................................................................................14
Right-Click..................................................................................................................................... 15
The Windows Start Screen..................................................................................................................16
How to access the Start screen.................................................................................................... 16
Get to know Windows 8.1............................................................................................................. 16
Swipe Right.................................................................................................................................... 16
Swipe Left.......................................................................................................................................17
Swipe Up/Down.............................................................................................................................17
Split Screen.....................................................................................................................................17
Using Headphones.............................................................................................................................. 17
Inserting the Micro-SIM Card (Optional)............................................................................................18
Inserting the MicroSD Card.................................................................................................................19
5 Managing your tablet settings..........................................................................21
Wi-Fi setting.........................................................................................................................................21
Turning On/Off Wi-Fi.................................................................................................................... 21
Connecting to a network.............................................................................................................. 21
Mobile broadband setting...................................................................................................................22
Turning On/Off mobile broadband.............................................................................................. 22
Connecting to a mobile broadband network.............................................................................. 22
Disconnecting from mobile broadband network........................................................................ 23
Mobile broadband options............................................................................................................23
3
Service Provider hardware information........................................................................................24
Enabling PIN lock.......................................................................................................................... 24
Refreshing / Recovering / Re-setting your tablet..............................................................................24
Refresh your PC without affecting your files............................................................................... 24
Remove everything and re-install Windows................................................................................ 25
Advanced startup...........................................................................................................................25
6 Synchronizing your tablet................................................................................ 26
Using Microsoft account.................................................................................................................... 26
Copying music, photos, and videos................................................................................................... 26
7 Getting Your Stylus Ready for Use...................................................................27
Using the Optional Stylus with Your Tablet .......................................................................................27
8 Docking Your Tablet to the Keyboard Dock ................................................ 29
Undocking Your Tablet from the Keyboard Dock............................................................................. 29
9 Cleaning Your Tablet..........................................................................................31
10 Troubleshooting...............................................................................................32
Battery problem...................................................................................................................................32
System problem.................................................................................................................................. 32
Touchscreen problem.........................................................................................................................33
Network problem................................................................................................................................34
11 System Setup..................................................................................................... 35
System Setup (BIOS) Options............................................................................................................. 35
Updating the BIOS ............................................................................................................................. 38
12 Technical Specifications................................................................................. 40
13 Contacting Dell.................................................................................................44
4
1
Working on Your Tablet
Before Working Inside Your Tablet
Use the following safety guidelines to help protect your tablet from potential damage and to help to
ensure your personal safety. Unless otherwise noted, each procedure included in this document assumes
that the following condition exists:
• You have read the safety information that shipped with your tablet.
WARNING: Before working inside your tablet, read the safety information that shipped with your
tablet. For additional safety best practices information, see the Regulatory Compliance
Homepage at www.dell.com/regulatory_compliance
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or
by periodically touching an unpainted metal surface, such as a connector on the back of the
tablet.
CAUTION: Handle components and cards with care. Do not touch the components or contacts
on a card. Hold a card by its edges or by its metal mounting bracket.
CAUTION: When you disconnect a cable, pull on its connector or on its pull-tab, not on the cable
itself. Some cables have connectors with locking tabs; if you are disconnecting this type of cable,
press in on the locking tabs before you disconnect the cable. As you pull connectors apart, keep
them evenly aligned to avoid bending any connector pins. Also, before you connect a cable,
ensure that both connectors are correctly oriented and aligned.
NOTE: The color of your tablet and certain components may appear differently than shown in this
document.
To avoid damaging your tablet, perform the following steps before you begin working inside the tablet.
1. Ensure that your work surface is flat and clean to prevent the tablet cover from being scratched.
2. Turn off your tablet (see Turning Off Your Tablet).
3. If the tablet is connected to a docking device (docked) such as the optional docking station or
keyboard dock, un-dock it.
4. Disconnect the power adapter from the tablet.
5. Press and hold the power button for a few seconds to remove the flea power from the system board.
CAUTION: To guard against electrical shock, always unplug your tablet from the electrical
outlet.
5
CAUTION: Before touching anything inside your tablet, ground yourself by touching an
unpainted metal surface, such as the metal at the back of the tablet. While you work,
periodically touch an unpainted metal surface to dissipate static electricity, which could
harm internal components.
6. Remove the storage SD card from the tablet.
Turning off Your Tablet
Turning off your tablet completely shuts down your tablet. You can turn off your tablet by two ways:
• Using power button
• Using charms menu
1. To turn off your tablet using power button:
a. Press and hold the Power button until you see “Slide to shut down your PC” on the screen.
NOTE: After you press and hold the Power button, by default, the “Slide to shut down your
PC” screen displays in Venue 10 Pro 5055. To change the power button setting, go to
Control Panel > Power Options > Change Plan Setting > Change Advanced Power
Settings. To access Control Panel, swipe at the right edge of the screen, tap Search, enter
Control Panel in the search box, and then click Control Panel.
b. Slide to shut down your tablet.
NOTE: You can also turn off your tablet without sliding down the screen. Press and hold the
Power button for >10 seconds to turn off your tablet. You can perform this force
shutdown, if your tablet is not responding / behaving unexpectedly or touch is not working.
2. To turn off your tablet using the charms menu:
a. Swipe from the right edge of the display to access the Charms menu.
6
b. Touch Settings —> Power —> Shut down to turn off the tablet.
7
2
Features
Table 1.
1. Camera
2. Camera-status light
3. Microphones
4. Power button
5. Windows button
6. MicroSD memory card
reader
7. Micro-SIM reader (LTE/
HSPA+ models only)
8. Speaker
9. Noble security-cable slot
10. Back camera
11. Dock-guide slots
12. Dock pins
13. Service-tag label
14. Wi-Fi / WWAN status light
(optional)
15. USB 2.0 connector
16. Speaker
17. Battery-status light
18. Micro USB power
connector
19. Micro HDMI connector
20. Volume buttons
21. Audio connector
Keyboard dock (optional)
22. Dock connector
23. Dock latches
24. Undock button
25. Touchpad
Stylus (optional)
26. Pen Tip (replaceable)
27. Buttons
28. Pen loop
8
9
3
Setting Up Your Tablet
Charging the Tablet
CAUTION: Charge the battery in an ambient temperature of 0 °C to 40 °C.
CAUTION: Use only the power adapter and power cable that came with your tablet. Using
unauthorized power adapters or power cables may cause severe damage to your tablet.
NOTE: The battery is not fully charged when you unpack your tablet.
1. Connect the power cable into the power adapter.
2. Connect the power adapter to an electrical outlet and charge the tablet until the battery is fully
charged.
NOTE: The tablet battery requires about 4 hours to fully charge.
You can check the tablet battery charge status from:
• Battery-charge light located on the front of the tablet:
LED Behavior Description
Solid white color on Battery is charging.
Off Battery is not charging. Either no AC adapter is
connected or battery is fully charged.
Amber color on Momentarily – The LED will be solid amber for 2 seconds
and then change to solid white. This is an
indication that the system cannot power on
with the current state of charge, but the
battery is being charged.
– Battery is charging
– The tablet will not power on.
NOTE: You can check the exact battery charge level by booting to the operating system.
• Battery icons displayed on the screen:
10
Battery icon Description
Battery is fully charged and AC adapter is
connected.
Battery is charging with AC adapter.
Your tablet is running on battery power and the
battery is discharging.
Your tablet is plugged in, and either no battery is
detected or the battery is not working correctly.
Battery is at low level.
Battery is at critical level.
Turning On Your Tablet
NOTE: Use this tablet in an ambient temperature between 0 °C and 40 °C.
1. Press and hold the Power button for 2 seconds to turn on your tablet.
2. If the lock screen image displays, swipe your finger from the bottom of the display to switch to the
login screen, and then enter the password to log in to Windows.
The tablet is ready for use after the Windows Start screen displays.
NOTE: If the login screen is not enabled in Windows 8.1, you will be taken directly from the lock
screen to the start screen.
NOTE: The lock screen displays only when returning from a sleep state.
11
Turning off the Screen
Using power button
Press the Power button to turn off the screen.
Using Charms
1. Swipe from the right edge of the display to access the Charms bar.
2. Touch Settings → Power → Sleep to turn off the screen.
NOTE: If your tablet is in a sleep state, press the Power button or Windows button
once to turn on the screen.
12
4
Using Your Tablet
Screen Orientation
For optimal viewing experience, the screen orientation changes automatically to portrait or landscape
format depending on how you hold the tablet.
NOTE: Some applications may not support automatic screen rotation to portrait or landscape
format.
How to lock / unlock the screen orientation
1. Swipe from the right edge of the display to access the Charms bar.
2. Touch Settings → Screen .
3. Touch toggle to lock the screen orientation, or touch toggle to unlock the screen
orientation.
Adjusting the screen brightness
You can adjust the screen brightness here by using the slider under the toggle menu.
13
Gestures
Your tablet has a multi-touch display. You can touch the screen to operate the tablet.
Gesture Actions Functions
Touch
Tap gently on the display with your fingertip.
• Select items on the screen, including options,
entries, images, and icons
• Start applications
• Touch buttons on the screen
• Input text using the on-screen keyboard
Touch and Hold
Touch and hold your finger on the display
• Display detailed information about an item
• Open the context menu of an item to perform
further actions
Drag and Drop
1. Touch and hold your finger on an item on
the screen
2. Keeping your finger in contact with the
display, move your fingertip to the desired
location
3. Take your finger off the display to drop the
item in the desired location
Move item such as images and icons on the screen
Swipe or Slide
Move your finger in a vertical or horizontal
direction on the display
• Scroll through the Start screen, web pages, lists,
entries, photos, contacts, and so on
• Close an application. (Swipe the application to
the bottom of the display)
14
Gesture Actions Functions
Zoom in
Touch the display with two fingers and then
move the fingers apart
Enlarge the view of an image or web page
Zoom out
Touch the display with two fingers and then
move the fingers closer
Reduce the view of an image or web page
Rotate
Touch the display with two or more fingers and
then move the fingers in a clockwise or counter-
clockwise arc
Rotate an object by 90 degrees
Right-Click
To perform a right-click on your tablet, Touch and Hold your finger for 2 seconds on any section of the
screen or an icon and then release your finger.
The options menu appears on the screen.
15
The Windows Start Screen
The Windows Start screen displays a list of default and custom Live Tiles, which act as a shortcut to
Control Panel, Windows Explorer, Weather application, RSS, Windows Store, Internet Explorer, and other
installed applications.
Live Tiles on your Start screen change and update in real time so you can get real-time updates about
news or sports, check what your friends are up to, and get the latest weather forecast.
The tile-based user interface gives you direct access to your most recently used applications, Emails,
photos, music, videos, contacts, Facebook & Twitter updates, and frequently viewed websites. You can
pin your favorite or frequently used applications as Live Tiles to customize the Start screen.
You also can personalize the Start screen by setting your favorite picture as a wallpaper.
NOTE: Live Tiles can be added or removed by using Pin or Unpin options.
How to access the Start screen
Follow either method to access the Start screen:
• Press the Windows button .
• Swipe from the right edge of the display to access the Charms bar, and then touch the Start icon .
Get to know Windows 8.1
You can touch the Help+Tips tile on the Start screen to get help and tips on using Windows 8.1.
Swipe Right
Swiping-in from the right edge of the display reveals the Charms bar. Charms provide access to the
system commands, such as Start, Search, Share, Devices, and Settings options.
16
If your tablet is running on an application or performing actions, pressing the Start icon takes you
back to the Start screen. If you are at the Start screen, pressing the Start icon takes you to the most
recently used application or most recently viewed screen.
NOTE: The functionality of the Start icon is same as Windows button .
Swipe Left
• Swiping slowly from the left edge to the right edge of the display reveals thumbnails of the open
applications and cycles the thumbnails of the open applications.
• Swiping-in and out on the left edge of the display brings up a list of the most recently used
applications.
Swipe Up/Down
• Swiping-in from the bottom or top edge of the display reveals the All apps icon . Touch All apps to
show an alphabetical list of all applications installed on your tablet.
• Swiping-in from the top to the bottom of an application docks or closes the application.
For more information on using Windows Start screen, visit windows.microsoft.com/en-us/windows-8/
start-screen-tutorial .
You can also enable the camera (front), when the screen is in lock mode. To enable the camera when the
screen is in lock mode:
1. Swipe from the right edge of the display to access the Charms bar.
2. Click Settings → Change PC Settings → PC and Devices
3. Scroll down and navigate to Camera.
4. Swipe to turn on, to use the camera during the lock screen mode.
To make sure you can use the camera during the lock screen mode:
1. Press Power button to turn off the screen.
2. Press Power button again to enable the lock screen mode.
3. Swipe down to enable the camera.
Split Screen
The split screen option enables you to open two applications on the same screen, which helps you in
multitasking. To split the screen:
1. Open any two applications that you want to perform the split screen.
2. Swipe from the left to open the second application and hold your finger until the screen splits.
3. Release your finger to drop the second application.
NOTE: Windows 8.1 enables you to split the screen in variable width.
Using Headphones
You can use headphones to listen to music and sounds, record audio, or make calls.
17
After you connect your device to the audio port, a pop-up window displays with options. Select the
appropriate option and click OK.
NOTE: These are the default options on the tablet, which display only when you connect a device
to the audio port. Depending upon your device, you can select any of these options.
WARNING: Listening to loud music for extended period of time can lead to hearing loss.
1. Connect the headphones to the audio port (3.5 mm) on the tablet.
2. Insert the earphones in your ears and adjust the volume level to a comfortable level.
NOTE: When you connect a headphone or an external audio device to the audio connector, the
integrated speakers on your tablet are muted automatically.
CAUTION: To prevent damage to the headphones when disconnecting it from the tablet, pull the
connector and not the cable.
NOTE: It is recommended that you turn down the volume level before plugging the headphone,
and then adjust to a comfortable level. Sudden exposure to loud sounds can cause hearing damage.
Inserting the Micro-SIM Card (Optional)
1. Loosen the screw that secures the card-slot door.
2. Open the card-slot door.
3. Insert the micro-SIM card into the respective slot and push the card in until it clicks in place.
4. Close the card-slot door.
5. Tighten the screw to secure the card-slot door.
18
CAUTION: Opening the card-slot door without loosening the screw may damage the door.
NOTE: The type of screw may vary depending on the tablet configuration.
NOTE: Make sure that the card is correctly aligned and is inserted all the way.
NOTE: Turn off your device before inserting the micro‑SIM card.
Inserting the MicroSD Card
1. Insert the card into the respective slot and push the card in until it clicks in place.
19
NOTE: Make sure that the card is correctly aligned and is inserted all the way.
NOTE: Turn off your device before inserting the microSD card.
20
5
Managing your tablet settings
Wi-Fi setting
Turning On/Off Wi-Fi
1. Swipe from the right edge of the display to access the Charms bar.
2. Touch Settings → Change PC settings → Networks → Airplane mode.
3. Swipe Wi-Fi icon right or left to turn Wi-Fi on or off.
Connecting to a network
1. Swipe from the right edge of the display to access the Charms bar.
2. Touch Settings → Available → Select an available network → Connect
.
21
Mobile broadband setting
Turning On/Off mobile broadband
1. Swipe from the right edge of the display to access the Charms bar.
2. Touch Settings →Change PC settings → Networks → Airplane mode.
3. Swipe Mobile broadband icon left or right to turn mobile broadband on or off.
Connecting to a mobile broadband network
1. Ensure that an active SIM card is inserted into the tablet.
2. Swipe from the right edge of the display to access the Charms bar.
22
3. Touch Settings → Networks → Connections → Your Service Provider → Connect.
4. The estimated data usage will be shown after the mobile broadband network is enabled.
NOTE: You can choose the option Connect automatically to connect the mobile broadband
automatically.
NOTE: Your tablet will automatically prioritize Wi-Fi networks over mobile broadband networks,
when both are available. If your tablet is connected to the mobile broadband and any of saved Wi-Fi
connections come within range, it will disconnect from the mobile network and connect to the Wi-
Fi automatically.
Disconnecting from mobile broadband network
1. Swipe from the right edge of the display to access the Charms bar.
2. Touch Settings → Networks → Your Service Provider → Disconnect.
NOTE: After your tablet has disconnected from mobile broadband, the option Connect
automatically will be disabled as well.
Mobile broadband options
1. Swipe from the right edge of the display to access the Charms bar.
2. Touch Settings →Networks .
3. Touch and hold Your Service Provider or right-click if docked.
• Touch Show estimated data usage/Hide estimated data usage to show or hide your data usage.
• Touch Set as metered connection/Non metered connection to set a particular connection as a
metered/non-metered connection.
• Touch View connection properties to view your connected mobile broadband properties.
NOTE: If the option Set as metered connection is enabled, Windows Update will not download
updates automatically unless it is a high priority, critical security update.
23
Service Provider hardware information
1. Swipe from the right edge of the display to access the Charms bar.
2. Touch Settings → Change PC settings → Network.
3. Touch Your Service Provider to view the hardware information including the subscriber information
and International Mobile Equipment Identity (IMEI) number.
Enabling PIN lock
1. Swipe from the right edge of the display to access the Charms bar.
2. Touch Settings → Network .
3. Touch and hold Your Service Provider or right-clicked if docked.
4. Touch View connection properties→Security→Use a PIN.
5. Enter your SIM PIN Code.
NOTE: Your Service Provider refers to the network service providers available in your location.
CAUTION: If you enter the incorrect PIN code, your mobile broadband connection will not be
established. If you unsuccessfully enter the code three times, your SIM card will be locked. To
unlock the SIM card, contact your service provider to get a Personal Unblocking Key (PUK) to
unlock the SIM card.
NOTE: Before you contact your carrier, have your IMEI number ready.
Refreshing / Recovering / Re-setting your tablet
You can refresh / recover / restore your tablet to original factory settings.
1. Swipe from the right edge of the display to access the Charms bar.
2. Touch Settings → Change PC Settings → Update and recovery → Recovery.
•Refresh your PC without affecting your files
•Remove everything and reinstall Windows
•Advanced startup
3. Select any recovery option to complete the task.
Refresh your PC without affecting your files
This option enables you to refresh your tablet without losing your photos, music, videos, and other
personal files. If you want to perform this action:
1. Click Get started. The Refresh your PC window opens.
2. Click Next.
3. Click Refresh.
Click Cancel to cancel this action.
24
Remove everything and re-install Windows
This option enables you to recycle or start over your tablet completely, and you can reset to its default /
factory settings. If you want to perform this action:
1. Click Get Started. The Reset your PC window opens.
2. Click Next.
After you click Next, you will now have to select any of the two below options to finish the task:
•Just remove my files — If you select this option, Windows removes all your files including your
photos, music, videos, and other personal files.
•Fully clean the drive — If you select this option, Windows resets your tablet.
CAUTION: Resetting your tablet erases all data from your tablet, including your account
configuration, music, pictures, files, and so on. Ensure that you back up all the required data
before you proceed.
Click Cancel to cancel this action.
Advanced startup
This option enables you to start up from a device or compact disc (such as DVD or USB drive) and change
your tablet’s firmware settings, change Windows startup settings, or restore Windows from the system
image. If you want to perform this action, click Restart Now.
NOTE: Third-party applications will be removed.
25
6
Synchronizing your tablet
Using Microsoft account
If your computer has Microsoft Windows 8.1 installed, you can synchronize user settings of your tablet
with your computer using a Microsoft account. When you sign in with your Microsoft account on your
tablet, you can automatically synchronize your settings, including internet browser history, application
settings, and personal files etc., with other Windows 8.1 PCs and Windows 8.1 tablets.
NOTE: You need a wireless connection for both your computer and tablet.
1. Go to Charms bar, then click Settings → Change PC Settings →Accounts → Connect to a
Microsoft account to switch your computer local account to your Microsoft account.
2. A new option will be added to PC Settings called Sync your settings.
3. Click Settings → Change PC Settings → More PC Settings → Sync your settings to show all kind
of toggles for synchronizing your data and settings.
Copying music, photos, and videos
1. Connect a USB key or a Micro-SD card to the computer and copy the required files.
2. After the copy is complete, use the Safely Remove Hardware wizard to remove your tablet from the
computer.
3. You can also use the Skydrive feature of Win 8.1 to copy music, photos, and videos.
26
7
Getting Your Stylus Ready for Use
1. Twist the barrel in a counter clockwise direction.
2. Insert an AAAA battery with the positive side facing the tip of the pen.
NOTE: Follow your local and regional statutes and regulations on disposal of battery waste.
3. Re-assemble the barrel securely.
Using the Optional Stylus with Your Tablet
The Stylus is ergonomically designed to work with your tablet for long time periods. The user can
seamlessly switch between pen and finger entry without any manual mode switching. The stylus
supports features such as palm rejection, hovering, and pressure sensing, which allow for industry leading
accuracy and ease of use with no calibration necessary. The two buttons are used for performing mouse
clicks(left-click and right-click). You can use the tip of the stylus to draw shapes, select text, turn a page
and write or sign the documents on your tablet.
You can also press the button on the side of the stylus to perform the left-click and right-click functions
on your tablet.
27
28
8
Docking Your Tablet to the Keyboard
Dock
1. Rotate the keyboard dock to a 90-degree angle.
NOTE: The hinge position will be open, when you dock you tablet to the keyboard dock.
2. Dock the tablet to the keyboard dock.
NOTE: When the connection is made, you need to manually turn the on-screen keyboard off if it is
displayed on the screen.
Undocking Your Tablet from the Keyboard Dock
1. Push and hold the button on the Mobile Keyboard dock.
2. Lift the tablet from the Mobile Keyboard dock.
29
30
9
Cleaning Your Tablet
CAUTION: Before you clean your tablet, disconnect all cables. Clean your tablet with a soft cloth
dampened with water. Do not use liquid or aerosol cleaners, which may contain flammable
substances.
1. Turn off your tablet. For more information on turning off your tablet, see Turning Off Your Tablet.
2. Disconnect any attached devices, headphones, speakers, and keyboard dock from the tablet and
from their electrical outlets.
3. Remove any installed Micro-SD and Micro-SIM card. For more information on removing the Micro-
SD card and Micro-SIM card, see Remove the Micro-SD card and Remove the Micro-Sim card.
4. Moisten a soft, lint-free cloth with either water or a display cleaner, and wipe the surface of the
tablet until it is clean. Do not allow water from the cloth to seep down to the tablet ports and
surrounding Windows button.
NOTE: To avoid damaging the tablet or display, follow the instructions that are included with the
product.
NOTE: Do not clean the keyboard with a moist cloth.
31
10
Troubleshooting
Battery problem
Problems Possible causes Possible solutions
Battery does not charge • Unplug the Dell AC power
adapter from the wall and
verify that the outlet is
functioning.
• Check all cable
connections and plug
back into the wall, then
back into the tablet.
• Check all connectors to
ensure proper
connectivity.
NOTE: The tablet battery
requires about 4 hours to
fully charge.
The tablet's temperature is below 0 °C
or higher than 40 °C.
Charge the battery in an
ambient temperature
between 0 °C to 40 °C.
The battery or power adapter is
damaged.
Contact a Dell authorized re-
seller to replace the battery or
power adapter.
Battery drains quickly even
when the tablet is in Standby
mode
If the tablet is not in the range of a
network it can connect to, the tablet
continues to send out signals to locate
a base station and drains the battery.
• Temporarily turn off the
tablet.
• Move the tablet in range
of a network it can
connect to, or temporarily
turn off the wireless
connection on your tablet.
• Use your tablet in airplane
mode.
System problem
Problems Possible causes Possible solutions
Tablet does not turn on The battery is completely
discharged. 1. Charge the tablet for at least
4 hours.
32
2. Press and hold the Power
button for 4 seconds.
Tablet does not turn off Press and hold the Power button
for 11 seconds to perform a hard
shut down.
Tablet locks up 1. Press and hold the power
button for 11 seconds to
perform a hard shut down.
2. Remove the power supply
and unplug / plug the
battery.
Tablet is not responding or
behaving unexpectedly
• Driver failure
• Operating system failure
• Virus/Malware
1. Shut down and restart your
tablet.
2. Refresh the tablet.
3. Contact Dell’s support
service. Go to dell.com/
support or dell.com/
contactdell.
Software or feature is not
working as expected
Restart your tablet. Software
updates may have been
downloaded in the background.
Swipe from the right edge of the
display to access the Charms bar
and touch Settings→ Power→
Restart to restart the tablet.
Docking station not working as
expected
Un-dock / Re-dock your tablet. If
the issue still continues, power
cycle your tablet on the dock.
Touchscreen problem
Problems Possible causes Possible solutions
Touchscreen responds slowly or
improperly
Protective cover prevents the
tablet from recognizing your
inputs.
• Shutdown and restart your
tablet.
• Gently wipe the display with a
clean dry cloth.
• Remove any protective covers
from the touchscreen.
• If the operating system is re-
installed, make sure all the
drivers are installed.
33
Network problem
Problems Possible causes Possible solutions
No wireless connection 1. Check if the wireless radio is
on. See Wi-Fi setting.
2. Try to get closer to the
wireless access point.
3. Try to connect to another
known wireless access
point.
4. Reset the wireless router if
using a private network;
open the browser to view
the landing page if using a
public network.
5. Contact your internet
service provider for help.
No mobile broadband
connection
• The mobile broadband has
been capped.
• No signal from the service
provider.
1. Check if the mobile
broadband is turned on. See
Mobile Broadband Setting.
2. Move your tablet to a
different location for better
signal reception.
Contact your service provider to
change your broadband plan.
34
11
System Setup
System Setup enables you to manage your computer hardware and specify BIOS‐level options. From the
System Setup, you can:
• Change the NVRAM settings after you add or remove hardware
• View the system hardware configuration
• Enable or disable integrated devices
• Set performance and power management thresholds
• Manage your computer security
To access the system setup options (BIOS):
1. Connect your tablet to the keyboard dock or connect a USB enabled keyboard to your tablet.
2. Press the Power button to turn on your tablet or restart your tablet, if you have already turned
on your tablet.
3. Press F2 after the Dell logo appears.
NOTE: You might have to press F2 repeatedly until the Windows redirects to the system setup
options.
To access the setup options (BIOS) without an external keyboard :
1. Press the Power button to turn on your tablet or restart your tablet, if you have already turned
on your tablet.
2. Press and hold the Volume Up button when the Dell logo appears on the screen.
3. When the F12 Boot Selection menu appears, press the Volume Up button to change the boot
selection to the BIOS Setup option.
NOTE: The Volume Up button cycles through the menu options (Boot Options, BIOS Setup,
Diagnostics, and so on. You can select the desired option by pressing the Volume Up button.)
4. Press the Volume Down button to select the option.
System Setup (BIOS) Options
Table 2. System Information
Option Function
System Time Displays the system
time.
System Date Displays the system
date.
35
Option Function
BIOS Version Displays the BIOS revision.
EC Version Displays the EC Version.
Product Name Displays the product
name of your tablet.
Service Tag Displays the service tag of your tablet.
Asset Tag Displays the asset tag of your tablet. Allows you to
create a system asset tag if an asset tag is not
already set. This option is not set by default.
CPU Type Displays the CPU type of your tablet.
CPU Speed Displays the CPU speed of your tablet.
CPU Cache Displays the CPU Cache
memory installed on the
tablet.
Internal eMMC Displays the embedded
multimedia card of the
tablet.
System Memory Displays the memory installed on the tablet.
Memory Speed Displays the memory speed.
Table 3. Advanced
Option Function
Intel(R)SpeedStep This option is enabled by default.
Virtualization This option is enabled by
default.
External USB Ports This option is enabled by default.
XHCI Controller This option is enabled by default.
Camera This option is enabled by
default.
Internal Bluetooth This option is enabled by
default.
Internal WLAN This option is enabled by
default.
Media Card Reader This option is enabled by
default.
Lid Switch This option is enabled by
default.
COMMs operating LED status This option is enabled by
default.
36
Option Function
NOTE: The default
settings may vary
depending on the
tablet
configuration.
Table 4. Security
Option Function
Admin Password The administrative password is a user-configurable password that
will prohibit modification of most of the BIOS setup fields until the
correct administrative password is typed in the ‘Unlock Setup’
prompt through the BIOS setup. It can also be used in place of the
system password at boot time. Allows you to set, change, or delete
the administrator (admin) password (also known as the setup
password). The admin password enables several security features.
The drive does not have a password set by default.
To add a new password:
• Enter the old password
• Enter the new password
• Confirm the new password
Click OK after entering the password details.
System Password The system password is a user-configurable password that will
prohibit from booting until the correct system, administrative if it
exists or master password is typed in. The password can be enabled,
disabled, and modified through system setup. The drive does not
have a password set by default. To add a new password:
• Enter the old password
• Enter the new password
• Confirm the new password
Click OK after entering the password details.
Password Change Allows you to determine whether
changes to the system and hard
disk passwords are permitted
when an administrator password
is set.
• Allow Non-Admin Password
Changes (Default)
37
Table 5. Boot
Option Function
Network Stack This option is enabled by default.
File Browser Add Boot Option This option is enabled by default.
File Browser Del Boot Option This option is enabled by
default.
Secure Boot This option is disabled
by default.
Boot Option Priorities • Boot Option 1:
Windows Boot
Manager
• Boot Option 2:
Windows Boot
Manager ( HDD1–
UEFI OS (Hard Drive)
Table 6. Exit
Option Function
Save Changes and Reset Allows you to save the changes and reset.
Discard Changes and Reset Allows you to discard the changes and reset.
Restore Defaults Allows you to restore
the default values.
Discard Change Allows you to discard
the changes.
Save Changes Allows you to save the
changes.
Updating the BIOS
It is recommended to update your BIOS (system setup), on replacing the system board or if an update is
available. For tablet, ensure that the battery is fully charged and connected to a power outlet.
1. Restart the tablet.
2. Go to dell.com/support.
3. Enter the Service Tag or Express Service Code and click Submit.
NOTE: To locate the Service Tag, click Where is my Service Tag?
NOTE: If you cannot find your Service Tag, click Detect My Product. Proceed with the
instructions on screen.
4. If you are unable to locate or find the Service Tag, you can select your product from the products list
under the General Support.
5. Choose the Product Type from the list.
6. Select your product model and the Product Support page of your product appears.
7. Click Get Drivers and click View All Drivers.
38
The Drivers and Downloads page opens.
8. On the Drivers and Downloads screen, under the Operating System drop-down list, select BIOS.
9. Identify the latest BIOS file and click Download File.
You can also analyze which drivers need an update. To do this for your product, click Analyze
System for Updates and follow the instructions on the screen.
10. Select your preferred download method in the Please select your download method below
window; click Download File.
The File Download window appears.
11. Click Save to save the file on your tablet.
12. Click Run to install the updated BIOS settings on your tablet.
Follow the instructions on the screen.
39
12
Technical Specifications
NOTE: Offerings may vary by region. The following specifications are only those required by law to
ship with your computer. For more information about the configuration of your computer, go to
Help and Support in your Windows operating system and select the option to view information
about your computer.
System Information
System Chipset Intel Bay Trail-T CR Z3735F
DRAM bus width 1CH, DDR3L-RS on board
Flash EPROM 8 MB SPI
Processor
Processor type Intel Bay Trail-T CR Z3735F
External bus frequency 1333 MHz (DDR3L-RS)
Memory
Memory capacity 2 GB
Memory type DDR3L-RS for 2 GB
Memory speed 1333 MHz
Minimum memory 2 GB
Maximum memory 2 GB
Video
Video type Gen7 embedded in the Bay Trail-T CR SoC
Data bus
Video controller Gen7 Media decode Supports DX*11, OpenGL 3.0
( OGL 3.0), OpenCL 1.1 ( OCL 1.1), OpenGLES 2.0
(OGLES 2.0). Full HW acceleration for decode of
1080p60/P30 ( H.264, VP8, WMV9, VC1)
Communications
Network adapter LTE, HSPA+, EGPRS, GPRS
Wireless WLAN 11a/b/g/n , Bluetooth 4.0
40
Ports and Connectors
Audio one 3.5 mm jack
Video one micro HDMI connector
USB one USB 2.0 connector
Micro USB one micro USB connector
Memory card reader one microSD card reader
Docking port one Dell 6-pin dock connector
Subscriber Identity Module (SIM) port one Micro SIM slot
Display
Type
LED-LCD with MIPI interface, HD (1280x800), and
Full-HD (1920x1200)
Size 10.1 inches diagonal
Dimensions:
Height 227.72 mm (8.97 inches)
Width 147.8 mm (5.82 inches)
Depth 2.45 mm (0.10 inches)
Active area (X/Y) 216.81 mm x 135.50 mm
Maximum resolution 1920 x 1200 pixels
Maximum brightness 400 nits
Refresh rate 60 Hz
Minimum viewing angles:
Horizontal 80/80
Vertical 80/80
Pixel pitch 0.11292 mm X 0.11292 mm
Camera (Front)
Type 1.2 MP Lite-On Module 13P2SF130B with Aptina 1040
SOC Sensor
Resolution 1280 x 720 pixels
Camera (Back)
Type 5 MP LiteOn module 13P2BA520A with OV5693 Sensor
Resolution 3264 x 2448 pixels
41
Storage
Storage eMMC 4.5.1 32/64 GB (HS200)
Battery
Type Rechargeable Li-ion Battery (32Whr)
Dimensions
Depth 224.2 mm (8.83 inches)
Height 4.45 mm (0.18 inches)
Width 78.5 mm (3.09 inches)
Weight 170.00 g (0.38 lbs)
Voltage 3.7 VDC (nominal) and 4.35 VDC (maximum)
Temperature range
Operating Charge:
0 °C to 50 °C; 32 °F to 122 °F
Discharge:
0 °C to 70 °C; 32 °F to 158 °F
Non-Operating -20 °C to 60 °C; 4 °F to 140 °F
Coin-cell battery 3 V CR1220 lithium ion
Voltage: 3V
Capacity: 35mAh (23+/- 3 degree)
Weight: 0.8g
Temperature: -20 ~ +60 degree.
AC Adapter
Type
Input voltage 100 VAC to 240 VAC
Input current (maximum) 0.3 A
Input frequency 50 Hz to 60 Hz
Output power 10 W
Output current 5 Vdc / 2 A
Rated output voltage 5 Vdc
Temperature range:
Operating 0 °C to 40 °C (32 °F to 104 °F)
42
AC Adapter
Non-operating –40 °C to 70 °C (–40 °F to 158 °F)
Physical
Height 9.9 mm (0.39 inches)
Width 262.6 mm (10.34 inches)
Depth 175.8 mm (6.92 inches)
Weight (minimum) 656.9 grams (1.45 lbs)
Environmental
Temperature:
Operating 0 °C to 40 °C
Storage -40 °C to 65 °C
Relative humidity (maximum):
Operating Operating 10% to 90% (noncondensing)
Storage Storage 5% to 95% (noncondensing)
Altitude (maximum):
Operating –16 m to 3048 m (–50 to 10,000 ft)
Non-operating –15.2 m to 10,668 m (–50 ft to 35,000 ft)
Airborne contaminant level G1 as defined by ISA-71.04–1985
43
13
Contacting Dell
NOTE: If you do not have an active Internet connection, you can find contact information on your
purchase invoice, packing slip, bill, or Dell product catalog.
Dell provides several online and telephone-based support and service options. Availability varies by
country and product, and some services may not be available in your area. To contact Dell for sales,
technical support, or customer service issues:
1. Go to dell.com/support.
2. Select your support category.
3. Verify your country or region in the Choose a Country/Region drop-down list at the bottom of the
page.
4. Select the appropriate service or support link based on your need.
44