Table of Contents
- Contents
- Introduction to Your Printer
- Notations Used in the Documentation
- Optional Equipment and Replacement Parts
- Printer Part Locations
- Using the Control Panel
- Using AirPrint
- Wi-Fi or Wired Networking
- Loading Media
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Printing Your Document - Windows
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges and Maintenance Boxes
- Adjusting Print Quality
- Maintenance and Transportation
- Solving Problems
- Checking for Software Updates
- Product Status Messages
- Running a Product Check
- Resetting Control Panel Defaults
- Solving Setup Problems
- Solving Network Problems
- Solving Paper Problems
- Solving Problems Printing from a Computer
- Solving Page Layout and Content Problems
- Solving Print Quality Problems
- Uninstall Your Product Software
- Where to Get Help
- Technical Specifications
- Notices
Epson SC‑P900 User Manual
Displayed below is the user manual for SC‑P900 by Epson which is a product in the Large Format Printers category. This manual has pages.
Related Manuals
Epson®SureColor®P700/P900 User's
Guide
3
Contents
SureColor P700/P900 Series User's Guide................................................................................................ 9
Introduction to Your Printer...................................................................................................................... 10
Notations Used in the Documentation ................................................................................................ 10
Optional Equipment and Replacement Parts ..................................................................................... 10
Printer Part Locations......................................................................................................................... 10
Product Parts - Front ..................................................................................................................... 11
Product Parts - Rear...................................................................................................................... 12
Opening the Port Cover................................................................................................................. 13
Using the Control Panel ..................................................................................................................... 14
The LCD Screen............................................................................................................................ 14
Network Status Icon Information............................................................................................... 15
Entering Characters on the LCD Screen................................................................................... 16
Switching the Screen View........................................................................................................ 17
Adjusting the Control Panel Position ............................................................................................. 19
Changing the LCD Screen Language............................................................................................ 19
Selecting the Date and Time ......................................................................................................... 19
Adjusting Control Panel Sounds.................................................................................................... 20
Adjusting the Screen Brightness.................................................................................................... 20
Turning Off the Internal Light ......................................................................................................... 20
Using Power Saving Settings ........................................................................................................ 21
Changing the Sleep Timer Settings .......................................................................................... 21
Changing the Power Off Timer Settings.................................................................................... 21
Using AirPrint .................................................................................................................................... 21
Wi-Fi or Wired Networking........................................................................................................................ 23
Network Security Recommendations ................................................................................................. 23
Wi-Fi Infrastructure Mode Setup......................................................................................................... 24
Selecting Wireless Network Settings from the Control Panel ........................................................ 25
Wi-Fi Direct Mode Setup .................................................................................................................... 26
Enabling Wi-Fi Direct Mode........................................................................................................... 26
Wi-Fi Protected Setup (WPS)............................................................................................................. 27
4
Using WPS to Connect to a Network ............................................................................................. 27
Printing a Network Status Sheet......................................................................................................... 28
Printing a Network Connection Report ............................................................................................... 28
Network Connection Report Codes and Messages ....................................................................... 29
Changing or Updating Network Connections ..................................................................................... 34
Accessing the Web Config Utility................................................................................................... 34
Changing a USB Connection to a Wi-Fi Connection...................................................................... 35
Changing a Wi-Fi Connection to a Wired Network Connection...................................................... 35
Connecting to a New Wi-Fi Router ................................................................................................ 35
Disabling Wi-Fi Features ............................................................................................................... 36
Loading Media ........................................................................................................................................... 37
Loading Media in the Rear Paper Feeder........................................................................................... 37
Loading Media in the Front Paper Feeder .......................................................................................... 39
Loading Roll Paper............................................................................................................................. 41
Cutting and Removing Roll Paper ................................................................................................. 42
Loading a CD/DVD............................................................................................................................. 42
Removing a Printed CD/DVD ........................................................................................................ 43
Media Loading Capacity..................................................................................................................... 44
Available Epson Papers ..................................................................................................................... 48
Borderless Paper Type Compatibility ................................................................................................. 55
Paper or Media Type Settings - Product Software.............................................................................. 56
Selecting the Paper Settings for Each Source - Control Panel ........................................................... 56
Paper or Media Type Settings - Control Panel............................................................................... 57
Printing from a Computer ......................................................................................................................... 59
Printing with Windows ........................................................................................................................ 59
Selecting Basic Print Settings - Windows ...................................................................................... 59
Paper Configuration Options - Windows ................................................................................... 62
Advanced B&W Photo Options - Windows................................................................................ 62
Print Quality Options - Windows ............................................................................................... 63
Color Management Options - Windows .................................................................................... 64
Advanced Color Controls - Windows ........................................................................................ 65
Paper Source Options - Windows ............................................................................................. 65
Using Layout Manager - Windows ............................................................................................ 67
5
Selecting Print Layout Options - Windows..................................................................................... 73
Reduce/Enlarge Options - Windows ......................................................................................... 74
Multi-Page Printing Options - Windows..................................................................................... 74
Selecting Additional Settings - Windows ....................................................................................... 75
Saving, Sharing, and Customizing the Printer Settings ................................................................. 77
Saving and Sharing Print Settings - Windows........................................................................... 77
Saving and Sharing Media Settings - Windows......................................................................... 79
Editing Print Setting Displays - Windows .................................................................................. 80
Printing Your Document - Windows............................................................................................... 83
Checking Print Status - Windows.............................................................................................. 84
Selecting Default Print Settings - Windows.................................................................................... 84
Changing the Language of the Printer Software Screens.............................................................. 86
Changing Automatic Update Options ............................................................................................ 87
Using the Control Panel Menus................................................................................................................ 89
Accessing the Printer's Menus ........................................................................................................... 89
Maintenance Menu............................................................................................................................. 90
Screen Customization Menu .............................................................................................................. 91
Printer Settings Menu......................................................................................................................... 91
Basic Settings Menu........................................................................................................................... 92
Network Settings Menu ...................................................................................................................... 93
Restore Default Settings Menu .......................................................................................................... 94
Printer Status/Print Menu ................................................................................................................... 94
Replacing Ink Cartridges and Maintenance Boxes................................................................................. 96
Checking Ink Cartridge and Maintenance Box Status on the LCD Screen ......................................... 96
Purchase Epson Ink Cartridges and Maintenance Box ...................................................................... 96
Ink Cartridge and Maintenance Box Part Numbers........................................................................ 97
Removing and Installing Ink Cartridges.............................................................................................. 97
Maintenance Box Replacement ....................................................................................................... 103
Adjusting Print Quality............................................................................................................................ 104
Print Head Maintenance................................................................................................................... 104
Print Head Nozzle Check............................................................................................................. 104
Checking the Nozzles Using the Product Control Panel ......................................................... 104
Checking the Nozzles Using a Computer Utility...................................................................... 105
6
Print Head Cleaning .................................................................................................................... 107
Cleaning the Print Head Using the Product Control Panel ...................................................... 107
Cleaning the Print Head Using a Computer Utility................................................................... 109
Running a Power Cleaning Using the Product Control Panel.................................................. 110
Print Head Alignment ....................................................................................................................... 111
Aligning the Print Head Using the Product Control Panel ............................................................ 111
Aligning the Print Head Using a Computer Utility......................................................................... 112
Cleaning the Paper Guide ................................................................................................................ 113
Maintenance and Transportation ........................................................................................................... 114
Cleaning Your Product ..................................................................................................................... 114
Transporting Your Product ............................................................................................................... 114
Solving Problems .................................................................................................................................... 116
Checking for Software Updates........................................................................................................ 116
Product Status Messages ................................................................................................................ 117
Running a Product Check ................................................................................................................ 118
Resetting Control Panel Defaults ..................................................................................................... 119
Solving Setup Problems ................................................................................................................... 119
Noise After Ink Installation ........................................................................................................... 119
Software Installation Problems .................................................................................................... 120
Solving Network Problems ............................................................................................................... 120
Product Cannot Connect to a Wireless Router or Access Point .................................................. 120
Network Software Cannot Find Product on a Network................................................................. 122
Product Does Not Appear in Mac Printer Window ....................................................................... 123
Cannot Print Over a Network....................................................................................................... 123
Solving Paper Problems................................................................................................................... 124
Paper Feeding Problems............................................................................................................. 125
Paper Ejection Problems ............................................................................................................. 126
Solving Problems Printing from a Computer..................................................................................... 126
Nothing Prints.............................................................................................................................. 126
Product Icon Does Not Appear in Windows Taskbar ................................................................... 127
Error After Cartridge Replacement .............................................................................................. 127
Printing is Slow ............................................................................................................................ 128
Solving Page Layout and Content Problems.................................................................................... 129
7
Inverted Image............................................................................................................................. 129
Too Many Copies Print ................................................................................................................ 130
Blank Pages Print ........................................................................................................................ 130
Incorrect Margins on Printout....................................................................................................... 130
Border Appears on Borderless Prints .......................................................................................... 130
Incorrect Characters Print............................................................................................................ 131
Incorrect Image Size or Position.................................................................................................. 131
Slanted Printout........................................................................................................................... 132
Solving Print Quality Problems......................................................................................................... 132
White or Dark Lines in Printout .................................................................................................... 132
Blurry or Smeared Printout .......................................................................................................... 133
Faint Printout or Printout Has Gaps ............................................................................................. 133
Grainy Printout............................................................................................................................. 134
Incorrect Colors ........................................................................................................................... 134
Uninstall Your Product Software....................................................................................................... 135
Uninstalling Printing Software - Windows .................................................................................... 135
Uninstalling Product Software - Mac............................................................................................ 136
Where to Get Help............................................................................................................................ 137
Technical Specifications ........................................................................................................................ 138
Windows System Requirements ...................................................................................................... 138
OS X System Requirements............................................................................................................. 139
Paper Specifications ........................................................................................................................ 139
Printable Area Specifications ........................................................................................................... 140
Ink Specifications ............................................................................................................................. 143
Dimension Specifications ................................................................................................................. 144
Electrical Specifications ................................................................................................................... 145
Environmental Specifications ........................................................................................................... 146
Interface Specifications .................................................................................................................... 146
Network Interface Specifications ...................................................................................................... 146
Safety and Approvals Specifications ................................................................................................ 147
Notices ..................................................................................................................................................... 149
Important Safety Instructions............................................................................................................ 149
General Printer Safety Instructions.............................................................................................. 149
8
Ink Cartridge Safety Instructions.................................................................................................. 150
LCD Screen Safety Instructions................................................................................................... 151
Wireless Connection Safety Instructions ..................................................................................... 152
Important Privacy Notice (Printer Serial Number)............................................................................. 152
Binding Arbitration and Class Waiver ............................................................................................... 153
FCC Compliance Statement............................................................................................................. 156
Trademarks...................................................................................................................................... 157
Copyright Notice............................................................................................................................... 157
A Note Concerning Responsible Use of Copyrighted Materials................................................... 158
Default Delay Times for Power Management for Epson Products ............................................... 158
Copyright Attribution.................................................................................................................... 158
9
SureColor P700/P900 Series User's Guide
Welcome to the SureColor P700/P900 Series User's Guide.
For a printable PDF copy of this guide, click here.
10
Introduction to Your Printer
Refer to these sections to learn more about your printer and this manual.
Notations Used in the Documentation
Optional Equipment and Replacement Parts
Printer Part Locations
Using the Control Panel
Using AirPrint
Notations Used in the Documentation
Follow the guidelines in these notations as you read your documentation:
•Warnings must be followed carefully to avoid bodily injury.
•Cautions must be observed to avoid damage to your equipment.
•Notes contain important information about your printer.
•Tips contain additional printing information.
Parent topic: Introduction to Your Printer
Optional Equipment and Replacement Parts
You can purchase genuine Epson ink, paper, and accessories from an Epson authorized reseller. To
find the nearest reseller, visit proimaging.epson.com (U.S.) or proimaging.epson.ca (Canada), select
your product series and product, and click the Where to Buy button. Or call 800-GO-EPSON (800-463-
7766) in the U.S. or 800-807-7766 in Canada.
Option or part Part number
Roll media adapter (SureColor P900) C12C935221
Maintenance box C12C935711
In addition to the accessories listed above, extended service plans are available.
Parent topic: Introduction to Your Printer
Printer Part Locations
Check the printer part illustrations to learn about the parts on your printer.
14
Parent topic: Printer Part Locations
Using the Control Panel
See these sections to learn about the control panel and select control panel settings.
The LCD Screen
Adjusting the Control Panel Position
Changing the LCD Screen Language
Selecting the Date and Time
Adjusting Control Panel Sounds
Adjusting the Screen Brightness
Turning Off the Internal Light
Using Power Saving Settings
Parent topic: Introduction to Your Printer
The LCD Screen
1 Displays the menu screen to adjust printer settings
15
2 Displays your print history
3 Turns on or off the printer's interior light
4 Switches the screen view to display additional information
5 Displays the maintenance settings
6 Displays the network connection status
7 Displays notifications
8 Displays the printer's status
9 Displays the paper settings
10 Displays the ink and maintenance box levels
11 Ejects loaded paper
12 Selects paper size and type settings
Network Status Icon Information
Entering Characters on the LCD Screen
Switching the Screen View
Parent topic: Using the Control Panel
Network Status Icon Information
Your product displays status icons on the LCD screen for certain network status conditions.
Icons Description
The product is not connected to a wired (Ethernet) network.
The product is connected to a wired (Ethernet) network.
The product is not connected to a wireless (Wi-Fi) network.
The product is searching for an SSID or experiencing a wireless network connection issue.
The product is connected to a wireless (Wi-Fi) network; the number of bars indicates the
connection's signal strength.
16
Icons Description
Wi-Fi Direct is not enabled.
Wi-Fi Direct is enabled.
Parent topic: The LCD Screen
Entering Characters on the LCD Screen
Follow these guidelines to enter characters for passwords and other settings.
1 Displays the character count
2 Moves the cursor left or right
3 Switches between uppercase and lowercase characters, numbers and symbols
4 Switches between characters and numbers or symbols
5 Displays a list of common domain names to choose from
6 Enters a space
7 Select when you are finished
8 Deletes the previous character
18
Printing screen
Photo display screen (displays thumbnails of images you print using the printer driver and Epson Print
Layout).
Print status screen (displays ink levels and progress bar when printing).
Print setting screen (displays print settings for the printer driver and Epson Print Layout).
19
Parent topic: The LCD Screen
Adjusting the Control Panel Position
You can adjust the position of the control panel to make it easier to access. Raise or lower it to the
desired angle.
Parent topic: Using the Control Panel
Changing the LCD Screen Language
You can change the language used on the LCD screen.
1. Select the icon.
2. Select General Settings >Basic Settings >Language.
3. Select a language.
Parent topic: Using the Control Panel
Selecting the Date and Time
You can select the current date, time, and daylight saving phase in your area, and choose your preferred
date and time format.
1. Select the icon.
2. Select General Settings >Basic Settings >Date/Time Settings.
3. Change any of these settings as necessary:
•Date/Time: Selects the date and time.
•Daylight Saving Time: Selects between summer or winter daylight saving time.
20
•Time Difference: Adjusts the time difference between your local time and UTC (Coordinated
Universal Time).
Parent topic: Using the Control Panel
Adjusting Control Panel Sounds
You can adjust the sound level heard when you press buttons on the control panel or an error occurs.
1. Select the icon.
2. Select General Settings >Basic Settings >Sounds.
3. Change any of these settings as necessary:
•Mute: Turns on or off all sound from the product.
•Button Press: Adjusts the sound volume heard when pressing a button.
•Error Tone: Adjusts the sound volume heard when a product error occurs.
•Sound Type: Changes the type of sound heard.
Parent topic: Using the Control Panel
Adjusting the Screen Brightness
You can adjust the brightness of the LCD screen.
1. Select the icon.
2. Select General Settings >Basic Settings >LCD Brightness.
3. Press the –or +icons to decrease or increase the brightness.
4. Select OK to exit.
Parent topic: Using the Control Panel
Turning Off the Internal Light
The printer's internal light turns on during printing but you can turn it off.
1. Select the icon.
2. Select General Settings >Basic Settings >Inside Light.
3. Select from the following options:
•Auto: Turns on the internal light automatically during printing.
•Manual: Turns the light on or off only when you press the icon.
21
Parent topic: Using the Control Panel
Using Power Saving Settings
Your product enters sleep mode automatically and turns off the LCD screen if it is not used for a period
of time. You can make the time period shorter and select other options to save energy and resources.
Changing the Sleep Timer Settings
Changing the Power Off Timer Settings
Parent topic: Using the Control Panel
Changing the Sleep Timer Settings
You can adjust the time period before your product enters sleep mode and turns off the LCD screen.
1. Select the icon.
2. Select General Settings >Basic Settings >Sleep Timer.
3. Select the length of time before your product enters sleep mode.
Parent topic: Using Power Saving Settings
Changing the Power Off Timer Settings
You can have the product turn off automatically if it is not used for a specified period of time.
1. Select the icon.
2. Select General Settings >Basic Settings >Power Off Timer.
3. Select when you want the product to automatically turn off.
Parent topic: Using Power Saving Settings
Using AirPrint
AirPrint enables instant wireless printing from iPhone, iPad, iPod touch, and Mac without the need to
install drivers or download software.
1. Load paper in your product.
23
Wi-Fi or Wired Networking
See these sections to use your product on a Wi-Fi or wired network.
Network Security Recommendations
Wi-Fi Infrastructure Mode Setup
Wi-Fi Direct Mode Setup
Wi-Fi Protected Setup (WPS)
Printing a Network Status Sheet
Printing a Network Connection Report
Changing or Updating Network Connections
Network Security Recommendations
To help deter unauthorized access to your product over a network, you should protect your network
environment using appropriate security measures.
Security measures such as these can help deter threats such as loss of user data, use of telephone and
fax lines, and other intrusions:
•Enable security on your wireless LAN
Enable the appropriate security on the wireless LAN you plan to use with your product. Network
security such as a network password can deter interception of traffic over the wireless LAN. Your
router may already have a default password enabled by your Internet service provider (ISP). See your
ISP and router documentation for instructions on how to change the default password and better
secure your network.
•Connect your product only to a network protected by a firewall
Connecting your product directly to the Internet may leave it vulnerable to security threats. Instead,
connect it to a router or other network connection protected by a firewall. Your router may already
have a firewall set up by your Internet service provider; check with your ISP for confirmation. For best
results, set up and use a private IP address for your network connection.
•Change the default administrator password on your product
If your product has an option to set an administrator password, change the default administrator
password to deter access by unauthorized users to personal data stored on your product, such as IDs,
passwords, and contact lists.
Parent topic: Wi-Fi or Wired Networking
24
Wi-Fi Infrastructure Mode Setup
You can set up your product to communicate with your computer using a wireless router or access point.
The wireless router or access point can be connected to your computer over a wireless or wired network.
Note: You cannot connect to a wired and wireless network at the same time.
1 Epson product
2 Wireless router or access point
3 Computer with a wireless interface
4 Computer
5 Internet
6 Ethernet cable (used only for wired connection to the wireless router or access point)
25
Selecting Wireless Network Settings from the Control Panel
Parent topic: Wi-Fi or Wired Networking
Selecting Wireless Network Settings from the Control Panel
You can select or change wireless network settings using your product control panel.
To install your product on a wireless network, install the necessary print driver software package by
downloading it from the Epson website. The installer program guides you through network setup.
1. Select the icon.
2. Select Wi-Fi (Recommended) >Start Setup or Change Settings >Wi-Fi Setup Wizard.
3. Select the name of your wireless network or select Enter Manually to enter the name manually. Use
the on-screen keyboard to enter your network name.
4. Select the Enter Password field and enter your wireless password using the on-screen keyboard.
Note: The network name and password are case sensitive. Be sure to correctly enter uppercase and
lowercase letters, and numeric or special characters.
• To move the cursor, press the left or right arrows.
• To enter numbers or symbols, select 123#.
• To change the case of letters, select .
• To delete the previous character, select .
• To enter a space, select Space.
5. Select OK when you finish entering your password.
26
6. Confirm the displayed network settings and select Start Setup to save them.
Parent topic: Wi-Fi Infrastructure Mode Setup
Wi-Fi Direct Mode Setup
You can set up your product to communicate directly with your computer or another device without
requiring a wireless router or access point. In Wi-Fi Direct Mode, the product itself acts as a network
access point for up to 8 devices.
1 Epson product
2 Computer with a wireless interface
3 Other wireless device
Enabling Wi-Fi Direct Mode
Parent topic: Wi-Fi or Wired Networking
Enabling Wi-Fi Direct Mode
You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or
other devices without a wireless router or access point.
1. Select the icon.
2. Select Wi-Fi Direct >Start Setup.
27
3. Do one of the following to complete Wi-Fi Direct setup:
• For iOS devices, select iOS. Scan the QR code with the camera app on your device and follow the
instructions on your device. Select Next on the LCD screen to display your product information,
then open the compatible Epson printing app on your device and select your product. Select
Complete on the LCD screen.
• For Android devices, select Android. Open the compatible Epson printing app on your device and
select your product. Select Complete on the LCD screen.
• For other types of devices, select Other OS Devices. Use your device to select the Wi-Fi network
name (SSID) displayed on the LCD screen and enter the password shown. Select Next on the
LCD screen to display your product information, then follow the instructions on the LCD screen.
Parent topic: Wi-Fi Direct Mode Setup
Wi-Fi Protected Setup (WPS)
If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.
Using WPS to Connect to a Network
Parent topic: Wi-Fi or Wired Networking
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to
connect your product to the network.
1. Select the icon.
2. Select Wi-Fi (Recommended) >Start Setup or Change Settings >Push Button Setup (WPS).
3. Hold down the WPS button on your wireless router until the security light flashes.
4. Follow the instructions on the LCD screen to complete WPS setup.
Parent topic: Wi-Fi Protected Setup (WPS)
28
Printing a Network Status Sheet
You can print a network status sheet to help you determine the causes of any problems you may have
using your product on a network.
1. Select the icon.
2. Select General Settings >Network Settings >Network Status .
3. Select Print Status Sheet .
Examine the settings shown on the network status sheet to diagnose any problems you have.
Parent topic: Wi-Fi or Wired Networking
Printing a Network Connection Report
You can print a network connection report to view solutions to any problems you may have using your
product on a network.
1. Select the icon.
2. Select General Settings >Network Settings >Connection Check.
The product checks your connection status.
3. Select Print Check Report.
Examine the error codes and solutions shown on the network connection report.
Network Connection Report Codes and Messages
Parent topic: Wi-Fi or Wired Networking
29
Network Connection Report Codes and Messages
Check the error codes and messages on the network connection report to solve problems you may
encounter with network connections. The tables here list solutions to problems based on the error codes
and messages that may appear on the top of the report.
1 Error code
2 Message
Note: Error codes and messages listed here may not all apply to your product.
Error Codes and Messages
Error code and message Solution
E-1
Confirm that the network cable is
connected and network devices such as
hub, router, or access point are turned on.
Make sure your router, access point, and/or hub are
turned on, and the network cable is securely connected to
your device and to your product.
If you are trying to set up Wi-Fi, remove the network cable
and set up Wi-Fi again. Ethernet and Wi-Fi cannot be
connected at the same time.
30
Error code and message Solution
E-2, E-3, or E-7
No wireless network names (SSID) found.
Confirm that the router/access point is
turned on and the wireless network (SSID)
is set up correctly. Contact your network
administrator for assistance.
No wireless network names (SSID) found.
Confirm that the wireless network name
(SSID) of the PC you wish to connect is set
up correctly. Contact your network
administrator for assistance.
Entered security key/password does not
match the one set for your router/access
point. Confirm security key/password.
Contact your network administrator for
assistance.
Check the following:
• Make sure your router or access point is turned on, and
is correctly connected to your computer or network
device.
• Turn off the router or access point, wait about 10
seconds, and turn it on again.
• Move your product closer to your router or access point,
and remove any obstacles between them. Also move
your product away from devices such as wireless
phones or microwaves.
• Confirm that the SSID shown on the network
connection report matches the label on your router or
access point. Also make sure your SSID uses only
ASCII characters and symbols, or your product cannot
display the SSID correctly.
• If you are trying to connect using the WPS push button
method, make sure your router or access point supports
it.
• If you are using a network password, check the label on
your router or access point to confirm that you are using
the correct password, or check with your network
administrator or router/access point documentation.
• If you are connecting to a smart device that generates
an SSID, check the device documentation for the SSID
and password you should use.
• If your wireless connection suddenly disconnects, and
another smart device was added to the network using a
WPS push button method or your network was set up
using a non-WPS push button method, try downloading
and installing your product software again.
• Check to see if you have the latest firmware installed.
31
Error code and message Solution
E-5
Security mode (e.g. WEP, WPA) does not
match the current setting of the printer.
Confirm security mode. Contact your
network administrator for assistance.
If the security on your router or access point is not one of
the following types, change the type of security on your
router or access point and reset your product's network
settings.
• WEP-64 bit (40 bit)
• WEP-128 bit (104 bit)
• WPA PSK (TKIP/AES); also known as WPA Personal
• WPA2 PSK (TKIP/AES); also known as WPA2 Personal
• WPA (TKIP/AES)
• WPA2 (TKIP/AES)
Latin America: Also make sure you are connecting to the
2.4GHz band on your network and using the password for
that band.
E-6
MAC address of your printer may be
filtered. Check whether your router/access
point has restrictions such as MAC address
filtering. See the documentation of the
router/access point or contact your network
administrator for assistance.
If your router or access point has MAC address filtering
enabled, register your product's MAC address so it is not
filtered. Locate the MAC address on the network
connection report and check your router or access point
documentation for instructions.
If your router or access point is using shared
authentication with WEP security, confirm that you are
using the correct authentication key and index.
If your router or access point limits the number of
connected devices, raise the connection limit. See your
router or access point documentation for instructions.
E-8
Incorrect IP address is assigned to the
printer. Confirm IP address setup of the
network device (hub, router, or access
point). Contact your network administrator
for assistance.
If your product's Obtain IP Address setting is set to Auto,
enable DHCP on your router or access point. If it is set to
Manual, the IP address may be out of range or on a
different network segment; set a valid IP address using
your product control panel or the Web Config utility.
You can also try turning off your product and the router or
access point, waiting about 10 seconds, and turning them
on again.
32
Error code and message Solution
E-9
Confirm the connection and network setup
of the PC or other device. Connection using
the EpsonNet Setup is available. Contact
your network administrator for assistance.
Make sure your computer or network device are turned
on. Also make sure that you can access the Internet and
other devices on the same network from the devices you
are trying to connect to your product.
If you still cannot connect to your product, turn off your
router or access point, wait about 10 seconds, and turn it
on again. Download and install your product software
again to reset your network settings.
E-10
Confirm IP address, subnet mask, and
default gateway setup. Connection using
the EpsonNet Setup is available. Contact
your network administrator for assistance.
Make sure other devices on the network are turned on and
do the following:
• If your product's Obtain IP Address setting is set to
Manual, check the IP address, subnet mask, and
default gateway addresses on the network connection
report to see if they are correct. If not, correct the
settings.
• If DHCP is enabled, set your product's Obtain IP
Address setting to Auto. If you want to use the DHCP-
assigned address as a static address, set the Obtain IP
Address setting to Manual, enter the product's IP
address as listed on the network connection report, and
set the subnet mask to 255.255.255.0.
If you still cannot connect to your product, turn off your
router or access point, wait about 10 seconds, and turn it
on again.
E-11
Setup is incomplete. Confirm default
gateway setup. Connection using the
EpsonNet Setup is available. Contact your
network administrator for assistance.
If you set your product's TCP/IP Setup setting to Manual,
check that the default gateway address listed on the
network connection report is correct. Also turn on the
device that is set as the default gateway.
33
Error code and message Solution
E-12
Confirm the following:
-Entered security key/password is correct
-Index of the security key/password is set to
the first number
-IP address, subnet mask, or default
gateway setup is correct
Contact your network administrator for
assistance.
Make sure other devices on the network are turned on and
do the following:
• Make sure the IP address, subnet mask, and default
gateway addresses are correct, if you are entering them
manually.
• Confirm that the subnet mask and default gateway
addresses for other devices are the same.
• Make sure the IP address does not conflict with other
devices.
If you still cannot connect to your product, do the
following:
• Turn off your router or access point, wait about 10
seconds, and turn it on again.
• Download and install your product software again to
reset your network settings.
• If your router or access point uses WEP security with
several registered passwords, make sure that the first
registered password is set on your product.
E-13
Confirm the following:
-Entered security key/password is correct
-Index of the security key/password is set to
the first number
-Connection and network setup of the PC
or other device is correct
Contact your network administrator for
assistance.
Make sure your router, access point, and/or hub are
turned on. Also make sure the TCP/IP setup on your
router, access point, and/or hub is not set manually; this
may cause your product's network settings to differ from
the manually set up devices.
If you still cannot connect to your product, do the
following:
• Turn off your router or access point, wait about 10
seconds, and turn it on again.
• Download and install your product software again to
reset your network settings.
• If your router or access point uses WEP security with
several registered passwords, make sure that the first
registered password is set on your product.
34
Network Environment Messages
Message Solution
The Wi-Fi environment needs to be
improved. Turn the wireless router off and
then turn it on. If the connection does not
improve, see the documentation for the
wireless router.
Move your product closer to your router or access point,
and remove any obstacles between them. Then turn off
your router or access point, wait about 10 seconds, and
turn it back on again. If you still cannot connect to your
product, check the documentation that came with your
router or access point for solutions.
*No more devices can be connected.
Disconnect one of the connected devices if
you want to add another one.
You can connect up to 8 computers or other devices to
your product using a Wi-Fi Direct (Simple AP) connection.
If you want to add another device, disconnect an existing
connected device first.
The same SSID as Wi-Fi Direct exists in
the environment. Change the Wi-Fi Direct
SSID if you cannot connect a smart device
to the printer.
Change the Wi-Fi Direct SSID.
Parent topic: Printing a Network Connection Report
Changing or Updating Network Connections
See these sections to change or update how your product connects to a network.
Accessing the Web Config Utility
Changing a USB Connection to a Wi-Fi Connection
Changing a Wi-Fi Connection to a Wired Network Connection
Connecting to a New Wi-Fi Router
Disabling Wi-Fi Features
Parent topic: Wi-Fi or Wired Networking
Accessing the Web Config Utility
You can select your product's network settings and confirm its operating status using a web browser.
You do this by accessing your product's built-in Web Config utility from a computer or other device that is
connected to the same network as your product.
1. Print a network status sheet.
2. Locate the IP address for your product that is listed on the network status sheet.
35
3. On a computer or other device connected to the same network as your product, open a web
browser.
4. Enter your product's IP address into the address bar.
You see the available Web Config utility options.
Parent topic: Changing or Updating Network Connections
Changing a USB Connection to a Wi-Fi Connection
If you have already connected your product to your computer using a USB connection, you can change
to a Wi-Fi connection.
1. Disconnect the USB cable from your product.
2. Uninstall your product software.
3. Download and install your product software from the Epson website using the instructions on the
Start Here sheet.
Parent topic: Changing or Updating Network Connections
Changing a Wi-Fi Connection to a Wired Network Connection
If you have already connected your product to your computer wirelessly, you can change to a wired
network connection if necessary.
1. Select the icon.
2. Select Description >Wired LAN Connection Method >Start Setup.
The Wi-Fi connection is disabled.
3. Connect one end of an Ethernet network cable to the product's LAN port.
4. Connect the other end to any available LAN port on your router or access point.
Parent topic: Changing or Updating Network Connections
Connecting to a New Wi-Fi Router
If you change the wireless router you have been using on your network, you need to update your
product's Wi-Fi connection to the new router.
Note for Latin America: If you are using a 5 GHz wireless router, set the router to operate in dual band
(2.4 GHz and 5 GHz) mode. If your router uses a single network name (SSID) for both the 2.4 GHz and
5 GHz band, give each band its own network name (SSID) instead, such as Home Network 2.4 GHz and
36
Home Network 5 GHz. See your router documentation or contact your internet service provider for
instructions.
1. Do one of the following:
•Windows: Uninstall your product software.
•Mac: Go to the next step.
2. Download and install your product software from the Epson website using the instructions on the
Start Here sheet.
Parent topic: Changing or Updating Network Connections
Disabling Wi-Fi Features
You may need to disable your product's Wi-Fi features if you change your network connection type or
need to solve a problem with your network connection.
Note: Before disabling Wi-Fi features, make a note of your product's SSID (network name) and
password.
1. Select the icon.
2. Select Wi-Fi (Recommended) >Start Setup or Change Settings >Others >Disable Wi-Fi.
3. Select Start Setup to disable Wi-Fi.
Parent topic: Changing or Updating Network Connections
37
Loading Media
Before you print, load media for the type of printing you will do.
Loading Media in the Rear Paper Feeder
Loading Media in the Front Paper Feeder
Loading Roll Paper
Loading a CD/DVD
Media Loading Capacity
Available Epson Papers
Borderless Paper Type Compatibility
Paper or Media Type Settings - Product Software
Selecting the Paper Settings for Each Source - Control Panel
Loading Media in the Rear Paper Feeder
You can print on a variety of paper types and sizes from paper loaded in the sheet feeder.
1. Turn on your product.
2. Open the paper support and pull up the extensions.
38
3. Open the front cover.
4. Load paper, glossy or printable side up and short edge first.
39
5. Slide the edge guides against the paper, but not too tightly.
6. When prompted by LCD screen, select the size and type of the paper you loaded.
Always follow these paper loading guidelines:
• Load only the recommended number of sheets.
• Load paper short edge first, no matter which way your document faces.
• Load the printable side faceup.
• Load letterhead or pre-printed paper top edge first.
• Do not load paper above the arrow mark inside the edge guide.
• Check the paper package for any additional loading instructions.
Parent topic: Loading Media
Loading Media in the Front Paper Feeder
You can load fine art media, poster boards, and other thick media in the front paper feeder. You can load
papers up to 0.011 inch (0.3 mm) thick.
Note: Leave at least the following amount of space behind the printer for ejected paper:
SureColor P700: 13 inches (330 mm)
40
SureColor P900: 16 inches (405 mm)
1. Select Paper Setting on the LCD screen.
2. Select Front Paper Feeder - Fine Art or Front Paper Feeder - Poster Board.
3. Pull out the front paper feeder as instructed on the LCD screen.
4. Follow the rest of the on-screen instructions to load paper.
5. When prompted by the LCD screen, select the size and type of the paper you loaded.
41
Always follow these paper loading guidelines:
• Load only one sheet at a time.
• Load fine art media short edge first, no matter which way your document faces.
• Load the printable side faceup.
• Check the paper package for any additional loading instructions.
Parent topic: Loading Media
Loading Roll Paper
You can load roll paper into the SureColor P700. To load roll paper in the SureColor P900, you need to
install the optional roll media adapter.
1. Select Paper Setting on the LCD screen.
2. Select Roll Paper.
3. Pull out the roll paper unit as instructed on the LCD screen.
4. Follow the rest of the on-screen instructions to load paper.
5. When prompted by the LCD screen, select the size and type of the paper you loaded.
Cutting and Removing Roll Paper
Parent topic: Loading Media
42
Cutting and Removing Roll Paper
After printing on roll paper, use scissors as described here to cut your printout from the roll paper.
1. When printing is finished, select Cut/Eject on the LCD screen.
2. Select Cut and Eject to print a cut line and feed the paper.
3. Use scissors to cut the paper along the cut line.
4. Select Done.
The paper feeds back through the printer.
5. For SureColor P900 only, open the roll paper unit.
6. Remove the roll paper.
Store unused roll paper in its original packaging away from high temperatures, humidity, and direct
sunlight.
Parent topic: Loading Roll Paper
Loading a CD/DVD
You can print on any compatible, ink jet-printable CDs or DVDs, including Blu-ray Discs.
Caution: Do not insert the disc tray while the product is printing, copying, or performing other operations.
Otherwise, your product may be damaged or the surface of the CD/DVD may become dirty or scratched.
Note: If you are using discs where the printable area extends to within 0.16 inch (4 mm) of the center
hole, you may need to adjust the inner diameter setting using the control panel.
43
1. Burn your files, music, or video onto your disc before printing on it.
2. Select Paper Setting on the LCD screen.
3. Select Disc Tray.
4. Pull out the front paper feeder as shown on the LCD screen.
5. Follow the rest of the on-screen instructions to load your disc.
Caution: Do not turn off the product with a CD or DVD loaded in it. Always remove the disc first.
Removing a Printed CD/DVD
Parent topic: Loading Media
Removing a Printed CD/DVD
After your CD or DVD is printed, the tray extends automatically.
Caution: Always remove the disc tray after printing. If you turn the product off and on again or perform a
head cleaning without removing the tray, the print head may contact the CD/DVD tray and cause the
product to malfunction.
44
1. Pull the disc tray out of the product and remove your CD or DVD from the tray.
2. Close the front cover.
Caution: After printing, handle the CD or DVD carefully. You may need to wait up to 24 hours for the ink
to dry fully before inserting it in a drive, depending on the type of disc you used. Keep printed discs away
from moisture and direct sunlight.
Parent topic: Loading a CD/DVD
Media Loading Capacity
You can load media in the paper types and quantities listed here into your product.
45
Rear Paper Feeder
Paper type Size Loading capacity Black ink type
Plain paper Letter (8.5 × 11 inches
[216 × 279 mm]), A3
(11.7 × 16.5 inches
[297 × 420 mm]), A3+
(13 × 19 inches [329 ×
483 mm]), B4
(13.9 × 9.84 inches
[353 × 250 mm])
Up to about 0.2 inch (5
mm) total thickness
—
Legal (8.5 × 14 inches
[216 × 356 mm]), A4
(8.3 × 11.7 inches
[210 × 297 mm]), B5
(7.2 × 10.1 inches
[182 × 257 mm]), A5
(5.8 × 8.2 inches
[148 × 210 mm]), A6
(4.1 × 5.8 inches
[105 × 148 mm])
Up to about 0.47 inch
(12 mm) total thickness
Non-standard sizes
Width: 3.5 to 13 inches
(89 to 329 mm) for
SureColor P700 and
3.5 to 17 inches (89 to
432 mm) for SureColor
P900
Length: 5 to 47.2
inches (127 to 1200
mm)
Up to about 0.2 inch (5
mm) total thickness
Epson Bright White Pro
Paper
A3 (11.7 × 16.5 inches
[297 × 420 mm])
40 sheets Matte Black
Letter (8.5 × 11 inches
[216 × 279 mm]), A4
(8.3 × 11.7 inches
[210 × 297 mm])
80 sheets
46
Paper type Size Loading capacity Black ink type
Epson Premium Photo
Paper Glossy
SureColor P900 only:
A2 (16.5 × 23.4 inches
[420 × 594 mm])
1 Photo Black
A3 (11.7 × 16.5 inches
[297 × 420 mm]), A3+
(13 × 19 inches [329 ×
483 mm])
10 sheets
Letter (8.5 × 11 inches
[216 × 279 mm]), A4
(8.3 × 11.7 inches
[210 × 297 mm])
20 sheets
4 × 6 inches
(102 × 152 mm), 5 × 7
inches (127 × 178 mm)
30 sheets
Epson Premium Photo
Paper Semi-gloss
SureColor P900 only:
A2 (16.5 × 23.4 inches
[420 × 594 mm])
1 Photo Black
A3 (11.7 × 16.5 inches
[297 × 420 mm]), A3+
(13 × 19 inches [329 ×
483 mm])
10 sheets
Letter (8.5 × 11 inches
[216 × 279 mm]), A4
(8.3 × 11.7 inches
[210 × 297 mm])
20 sheets
4 × 6 inches
(102 × 152 mm)
30 sheets
Epson Photo Paper Glossy Letter (8.5 × 11 inches
[216 × 279 mm]), A4
(8.3 × 11.7 inches
[210 × 297 mm]), 4 × 6
inches (102 × 152 mm),
5 × 7 inches
(127 × 178 mm)
30 sheets Photo Black
47
Paper type Size Loading capacity Black ink type
Epson Presentation Paper
Matte
A3 (11.7 × 16.5 inches
[297 × 420 mm]), A3+
(13 × 19 inches [329 ×
483 mm])
10 sheets Matte Black
Letter (8.5 × 11 inches
[216 × 279 mm]), A4
(8.3 × 11.7 inches
[210 × 297 mm])
30 sheets
Epson Ultra Premium Photo
Paper Luster
A3 (11.7 × 16.5 inches
[297 × 420 mm]), A3+
(13 × 19 inches [329 ×
483 mm])
10 sheets Photo Black
Letter (8.5 × 11 inches
[216 × 279 mm]), A4
(8.3 × 11.7 inches
[210 × 297 mm])
30 sheets
Epson Presentation Paper
Matte
A3 (11.7 × 16.5 inches
[297 × 420 mm]), A3+
(13 × 19 inches [329 ×
483 mm])
50 sheets Matte Black
Letter (8.5 × 11 inches
[216 × 279 mm]), A4
(8.3 × 11.7 inches
[210 × 297 mm])
60 sheets
Epson Premium
Presentation Paper Matte
Double-sided
Letter (8.5 × 11 inches
[216 × 279 mm]), A4
(8.3 × 11.7 inches
[210 × 297 mm])
1 sheet Matte Black
Epson Photo Quality Self-
adhesive Sheets
Letter (8.5 × 11 inches
[216 × 279 mm]), A4
(8.3 × 11.7 inches
[210 × 297 mm])
1 sheet Matte Black
Epson Proofing Paper
White Semimatte
A3+ (13 × 19 inches
[329 × 483 mm])
1 sheet Photo Black
48
Front paper feeder
You can load one sheet of posterboard or other thick media 0.02 to 0.059 inch (0.51 to 1.5 mm) thick in
the front paper feeder. You can also load one sheet of the following types of media:
• Epson Velvet Fine Art Paper
• Epson UltraSmooth Fine Art Paper
• Epson Watercolor Paper Radiant White
• Epson Exhibition Fiber Paper
• Epson Exhibition Watercolor Paper Textured
• Epson Hot Press Bright
• Epson Hot Press Natural
• Epson Cold Press Bright
• Epson Cold Press Natural
Parent topic: Loading Media
Available Epson Papers
You can purchase genuine Epson ink and paper at epson.com (U.S. sales), epson.ca (Canadian sales),
or epson.com.jm (Caribbean sales). You can also purchase supplies from an Epson authorized reseller.
To find the nearest one, call 800-GO-EPSON (800-463-7766) in the U.S. or 800-807-7766 in Canada.
Note: Paper/media availability varies by country.
Paper Type Size Part number Sheet count
Epson Bright White Paper Letter (8.5 × 11 inches
[216 × 279 mm])
S041586 500
Epson Cold Press Bright Letter (8.5 × 11 inches
[216 × 279 mm])
S041111 100
Letter (8.5 × 11 inches
[216 × 279 mm])
S042307 25
13 × 19 inches
(330 × 483 mm)
S042310 25
17 × 22 inches
(432 × 559 mm)
S042311 25
49
Paper Type Size Part number Sheet count
Epson Cold Press Natural Letter (8.5 × 11 inches
[216 × 279 mm])
S042297 25
13 × 19 inches
(330 × 483 mm)
S042300 25
17 × 22 inches
(432 × 559 mm)
S042301 25
Epson Velvet Fine Art Paper Letter (8.5 × 11 inches
[216 × 279 mm])
S041636 20
13 × 19 inches
(330 × 483 mm)
S041637 20
17 × 22 inches
(432 × 559 mm)
S042097 25
Epson Exhibition Fiber Paper Letter (8.5 × 11 inches
[216 × 279 mm])
S045033 25
13 × 19 inches
(330 × 483 mm)
S045037 25
17 × 22 inches
(432 × 559 mm)
S045039 25
Epson Hot Press Bright Letter (8.5 × 11 inches
[216 × 279 mm])
S042327 25
13 × 19 inches
(330 × 483 mm)
S042330 25
17 × 22 inches
(432 × 559 mm)
S042331 25
Epson Hot Press Natural Letter (8.5 × 11 inches
[216 × 279 mm])
S042317 25
13 × 19 inches
(330 × 483 mm)
S042320 25
17 × 22 inches
(432 × 559 mm)
S042321 25
50
Paper Type Size Part number Sheet count
Epson Exhibition Watercolor Paper
Textured
Letter (8.5 × 11 inches
[216 × 279 mm])
S045486 25
13 × 19 inches
(330 × 483 mm)
S045487 20
17 × 22 inches
(432 × 559 mm)
S045488 25
Epson Brochure & Flyer Paper
Matte Double-sided
Letter (8.5 × 11 inches
[216 × 279 mm])
S042384 150
Epson (Consumer) Sample Media
Pack
Various sizes SMP603 Various
quantities
Epson Photo Quality Self-adhesive
Sheets
A4 (8.3 × 11.7 inches
[210 × 297 mm])
S041106 10
Photo Quality Ink Jet Cards A6 (4.1 × 5.8 inches
[105 × 148 mm])
S041054 50
Epson Ultra Premium Photo Paper
Glossy
Letter (8.5 × 11 inches
[216 × 279 mm])
S042175 20
8 × 10 inches (203 × 254 mm) S041946 20
Epson Premium Luster Photo
Paper (260)
8.3 inches (211 mm) × 32 feet
(9.8 m)
S041408 1 roll
13 inches (330 mm) × 32 feet
(9.8 m)
S041409 1 roll
10 inches (254 mm) × 100 feet
(30.5 m)
S042077 1 roll
Epson Metallic Photo Paper
Glossy
Letter (8.5 × 11 inches
[216 × 279 mm])
S045589 25
13 × 19 inches
(330 × 483 mm)
S045590 25
17 × 22 inches
(432 × 559 mm)
S045591 25
51
Paper Type Size Part number Sheet count
Epson Metallic Photo Paper Luster Letter (8.5 × 11 inches
[216 × 279 mm])
S045516 25
13 × 19 inches
(330 × 483 mm)
S045517 25
17 × 22 inches
(432 × 559 mm)
S045598 25
Epson Photo Paper Glossy Letter (8.5 × 11 inches
[216 × 279 mm])
S041649 50
11 × 17 inches
(279 × 432 mm)
S041156 20
13 × 19 inches
(330 × 483 mm)
S041143 20
Letter (8.5 × 11 inches
[216 × 279 mm])
S041271 100
Epson Premium Photo Paper
Glossy
Letter (8.5 × 11 inches
[216 × 279 mm])
S041286 20
A3 (11.7 × 16.5 inches
[297 × 420 mm])
S041288 20
13 × 19 inches
(330 × 483 mm)
S041289 20
Letter (8.5 × 11 inches
[216 × 279 mm])
S041667 50
11 × 17 inches
(279 × 432 mm)
S041290 20
4 × 6 inches (102 × 152 mm) S041727 100
5 × 7 inches (127 × 178 mm) S041464 20
8 × 10 inches (203 × 254 mm) S041465 20
11 × 14 inches
(279 × 356 mm)
S041466 20
17 × 22 inches
(432 × 559 mm)
S042092 25
52
Paper Type Size Part number Sheet count
Epson Premium Photo Paper
Semi-gloss
4 × 6 inches (102 × 152 mm) S041982 40
Letter (8.5 × 11 inches
[216 × 279 mm])
S041331 20
13 × 19 inches
(330 × 483 mm)
S041327 20
8 × 10 inches (203 × 254 mm) S041467 50
Letter (8.5 × 11 inches
[216 × 279 mm])
S041257 50
11 × 14 inches
(279 × 356 mm)
S041468 50
A3 (11.7 × 16.5 inches
[297 × 420 mm])
S041260 50
13 × 19 inches
(330 × 483 mm)
S041263 50
17 × 22 inches
(432 × 559 mm)
S042124 25
Epson Premium Presentation
Paper Matte Double-sided
Letter (8.5 × 11 inches
[216 × 279 mm])
S041568 50
Epson Premium Presentation
Paper Matte
Letter (8.5 × 11 inches
[216 × 279 mm])
S041062 100
Legal (8.5 × 14 inches
[216 × 356 mm])
S041067 100
11 × 17 inches
(279 × 432 mm)
S041070 100
13 × 19 inches
(330 × 483 mm)
S041069 100
16.5 × 23.4
inches (420 × 594 mm)
S041079 30
17 × 22 inches
(432 × 559 mm)
S041171 100
53
Paper Type Size Part number Sheet count
Epson Proofing Paper White
Semimatte
13 × 19 inches
(330 × 483 mm)
S045115 100
13 inches (300 mm) × 100 feet
(30.5 m)
S042002 1 roll
Epson Standard Proofing Paper
Publication
13 inches (300 mm) × 100 feet
(30.5 m)
S041996 1 roll
Epson Standard Proofing Paper
Commercial
13 inches (300 mm) × 100 feet
(30.5 m)
S042144 1 roll
Epson Signature Worthy Sample
Pack
Letter (8.5 × 11 inches
[216 × 279 mm])
S045234 14
Epson Standard Proofing Paper
(240)
13 × 19 inches
(330 × 483 mm)
S045115 100
Epson Ultra Premium Photo Paper
Luster
Letter (8.5 × 11 inches
[216 × 279 mm])
S041405 50
A3 (11.7 × 16.5 inches
[297 × 420 mm])
S041406 50
13 × 19 inches
(330 × 483 mm)
S041407 50
13 × 19 inches
(330 × 483 mm)
S041604 100
17 × 22 inches
(432 × 559 mm)
S042084 25
13 inches
(330 mm) × 32.8 feet (10 m)
S041409 1 roll
54
Paper Type Size Part number Sheet count
Epson Ultra Premium Presentation
Paper Matte
Letter (8.5 × 11 inches
[216 × 279 mm])
S041341 50
A3 (11.7 × 16.5 inches
[297 × 420 mm])
S041343 50
13 × 19 inches
(330 × 483 mm)
S041339 50
13 × 19 inches
(330 × 483 mm)
S041605 100
17 × 22 inches
(432 × 559 mm)
S041908 100
Epson UltraSmooth Fine Art Paper 13 × 19 inches
(330 × 483 mm)
S041896 25
17 × 22 inches
(432 × 559 mm)
S041897 25
Epson Watercolor Paper Radiant
White
13 × 19 inches
(330 × 483 mm)
S041351 20
Epson Exhibition Canvas Matte 13 inches (330 mm) × 20 feet
(6.1 m)
S045255 1 roll
17 × 22 inches
(432 × 559 mm)
S045255 25
Epson Exhibition Canvas Gloss 13 inches (330 mm) × 20 feet
(6.1 m)
S045241 1 roll
Epson Exhibition Canvas Natural
Matte
13 inches (330 mm) × 20 feet
(6.1 m)
S045241 1 roll
Epson Exhibition Canvas Natural
Satin
13 inches (330 mm) × 20 feet
(6.1 m)
S045396 1 roll
Epson Exhibition Canvas Natural
Gloss
13 inches (330 mm) × 20 feet
(6.1 m)
S045410 1 roll
Parent topic: Loading Media
55
Borderless Paper Type Compatibility
You can print borderless photos on compatible paper types in compatible sizes.
Borderless Paper Types
• Epson Brochure & Flyer Paper Matte Double-sided
• Epson Ultra Premium Presentation Paper Matte
• Epson Premium Presentation Paper Matte
• Epson Premium Presentation Paper Matte Double-sided
• Epson Ultra Premium Photo Paper Glossy
• Epson Premium Photo Paper Semi-gloss
• Epson Ultra Premium Photo Paper Luster
• Epson Velvet Fine Art Paper
• Epson Watercolor Paper Radiant White
• Epson UltraSmooth Fine Art Paper 325 gsm
• Epson Premium Photo Paper Glossy
• Epson Photo Paper Glossy
Borderless Paper Sizes
• 4 × 6 inches (102 × 152 mm)
• 5 × 7 inches (127 × 178 mm)
• 8 × 10 inches (203 × 254 mm)
• Letter (8.5 × 11 inches [216 × 279 mm])
• 11 × 14 inches (279 × 356 mm)
• A4 (8.3 × 11.7 inches [210 × 297 mm])
• A3 (11.7 × 16.5 inches [297 × 420 mm])
• 13 × 19 inches (330 × 483 mm)
• 17 × 22 inches (432 × 559 mm)
Parent topic: Loading Media
56
Paper or Media Type Settings - Product Software
For this paper Select this Paper Type or Media Type setting
Plain paper
Epson Bright White Pro Paper
Plain Paper/Bright White Paper
Epson Premium Photo Paper Glossy Epson Premium Glossy
Epson Premium Photo Paper Semi-gloss Epson Premium Semigloss
Epson Photo Paper Glossy Photo Paper Glossy
Epson Watercolor Paper Radiant White Watercolor Paper Radiant White
Epson Velvet Fine Art Paper Velvet Fine Art Paper
Epson UltraSmooth Fine Art Paper UltraSmooth Fine Art Paper
Epson Premium Presentation Paper Matte Epson Archival Matte
Epson Presentation Paper Matte Epson Photo Quality Ink Jet
Epson Proofing Paper White Semimatte Epson Proofing Paper White Semimatte
Epson Premium Glossy Photo Paper (250) Epson Premium Glossy
Epson Premium Semigloss Photo Paper (250) Epson Premium Semigloss
Epson Premium Luster Photo Paper (260) Premium Luster Photo Paper
Epson Premium Semimatte Photo Paper (250) Epson Premium Semigloss
Parent topic: Loading Media
Selecting the Paper Settings for Each Source - Control Panel
You can change the default paper size and paper type for each source using the control panel on the
product.
57
1. Select Paper Setting on the LCD screen.
2. Select the paper source you want to change.
3. Select Paper Size.
4. Select the paper size you loaded.
5. Select Paper Type.
6. Select the paper type for the paper you loaded following the guidelines in the link here.
7. Repeat these steps to select another paper source to change.
Paper or Media Type Settings - Control Panel
Parent topic: Loading Media
Paper or Media Type Settings - Control Panel
For this paper Select this Paper Type setting
Plain paper
Epson Bright White Pro Paper
Plain Paper
Epson Premium Photo Paper Glossy Prem. Glossy
Epson Premium Photo Paper Semi-gloss Prem. Semigloss
Epson Photo Paper Glossy Glossy
Epson Watercolor Paper Radiant White Watercolor Paper Radiant White
58
For this paper Select this Paper Type setting
Epson Velvet Fine Art Paper Velvet Fine Art Paper
Epson UltraSmooth Fine Art Paper Epson UltraSmooth Fine Art paper
Epson Premium Presentation Paper Matte Archival Matte
Epson Presentation Paper Matte Photo Quality Ink Jet
Epson Proofing Paper White Semimatte Proofing Semimatte
Epson Premium Glossy Photo Paper (250) Prem. Glossy
Epson Premium Semigloss Photo Paper (250) Prem. Semigloss
Epson Premium Luster Photo Paper (260) Prem. Luster
Epson Premium Semimatte Photo Paper (250) Prem. Semigloss
Parent topic: Selecting the Paper Settings for Each Source - Control Panel
59
Printing from a Computer
Before printing from your computer, make sure you have set up your product and installed its software
as described on the Start Here sheet.
Note: If you have an Internet connection, it is a good idea to check for updates to your product software
on Epson's support website. If you see a Software Update screen, select Enable automatic checking
and click OK. The update scans your system to see if you have the latest product software. Follow the
on-screen instructions.
Printing with Windows
Printing with Windows
You can print with your product using any Windows application, as described in these sections.
Note: If you are using your Epson product with the Windows 10 S operating system, you cannot use the
software described in this section. You also cannot download and install any Epson product software
from the Epson website for use with Windows 10 S; you must obtain software only from the Windows
Store.
Selecting Basic Print Settings - Windows
Selecting Print Layout Options - Windows
Selecting Additional Settings - Windows
Saving, Sharing, and Customizing the Printer Settings
Printing Your Document - Windows
Selecting Default Print Settings - Windows
Changing the Language of the Printer Software Screens
Changing Automatic Update Options
Parent topic: Printing from a Computer
Selecting Basic Print Settings - Windows
Select the basic settings for the photo or document you want to print.
1. Open a photo or document for printing.
60
2. Select the print command in your application.
Note: You may need to select a print icon on your screen, the Print option in the File menu, or
another command. See your application's help utility for details.
3. If necessary, select your product name as the printer you want to use.
Note: You may also need to select Preferences,Properties,Print Settings, or Printer Properties
to view your print settings.
You see the Main tab of your printer settings window:
61
4. Select the Media Type setting that matches the paper you loaded.
Note: You can click Custom Settings to select a custom paper configuration.
5. If you are using non-Epson paper or media and you need to fine-tune its performance, select the
Media Type setting that is closest to the paper you loaded, click the Paper Config button, and
adjust the Color Density option as necessary.
6. Select a Color option:
• To print a color document or photo, select the Color setting.
• To print text and graphics in black or shades of gray, select the Advanced B&W Photo or
Grayscale setting.
Note: The Grayscale setting is available only when plain paper is selected as the Media Type.
7. Select the Print Quality setting that matches the print quality you want to use.
8. Select Black Enhance Overcoat to increase the black density by overcoating light gray ink on the
dark parts of printouts.
Note: The Black Enhance Overcoat setting may not be available depending on the selected paper
type.
9. Select the desired color management option as the Mode setting.
10. Select the Source setting that matches the paper feeding method you are using.
11. Select the size of the paper you loaded as the Size setting.
Note: You can also select the User-Defined setting to create a custom paper size.
12. If you want to print a photo without borders, select Borderless.
Note: You must select a compatible borderless paper type and size to print without borders. Check
the borderless paper compatibility list for details.
13. To see a preview of how your document or photo will print, select Print Preview. (The preview
appears after you click Print but before printing starts.)
14. To layout multiple print jobs for printing all at once, select Layout Manager.
62
Paper Configuration Options - Windows
Advanced B&W Photo Options - Windows
Print Quality Options - Windows
Color Management Options - Windows
Advanced Color Controls - Windows
Paper Source Options - Windows
Using Layout Manager - Windows
Parent topic: Printing with Windows
Paper Configuration Options - Windows
Select any of the available Paper Configuration options to fine-tune the quality of your print.
Color Density
Adjusts the ink saturation level.
Parent topic: Selecting Basic Print Settings - Windows
Advanced B&W Photo Options - Windows
If you select Advanced B&W Photo as the Color option, you can easily produce neutral and toned
black-and-white prints. Whether your photo is color or grayscale, you can use this screening and color
management technology to create stunning black-and-white prints. Click Advanced and select any of
the available options. You can also use Black Enhanced Overcoat to print darker tones of black.
Color Toning
Adds tone (hue) to your black-and-white output. The default is Neutral, which provides a neutral tonal
scale print. You can also choose other popular presets such as Cool,Warm, and Sepia. Note that
the presets affect the target in the tone color circle.
63
Tone
Changes the entire tonal scale of your black-and-white output. While Darker is the default setting, you
may see better results if you choose Dark. The tone color circle adjusts the hue of your black-and-
white print. Click on any portion of the color wheel or enter corresponding values to customize the
tone (hue) to add to your print. The closer you select to the edge of the wheel, the more color you add.
Brightness
Adjusts the overall lightness and darkness of your image.
Contrast
Adjusts the difference between the light and dark areas of your image.
Shadow Tonality
Controls tonality only in the shadow areas of your image.
Highlight Tonality
Controls tonality only in the highlight areas of your image.
Max Optical Density
Adjusts the overall density or focus of the print. Create a soft focus print by lowering the density
setting.
Highlight Point Shift
Helps reduce gloss differential on glossy media by adding density to the highlights of your image.
Parent topic: Selecting Basic Print Settings - Windows
Print Quality Options - Windows
You can use the Speed/Quality slider to set the desired quality level and select any of the available Print
Quality options to fine-tune the quality of your print. Some settings may be unavailable, depending on the
paper type and border setting you have chosen.
High Speed
Speeds up printing but may reduce print quality.
Edge Smoothing
Smooths jagged edges in low-resolution images such as screen captures or images from the Web.
Finest Detail
Sharpens edges on vector-based data including text, graphics, and line art. (This setting does not
affect photographs.)
Note: Enabling Finest Detail may decrease the print speed.
Black Enhance Overcoat
Prints darker tones of black by overcoating the black ink with gray.
64
Note: Printing with Black Enhance Overcoat increases the edge margins. Select Quality Options >
Minimize Top Margin to reduce the size of the margins. This may lower print quality and may cause
paper that curls easily to rub against the print head.
Parent topic: Selecting Basic Print Settings - Windows
Color Management Options - Windows
You can adjust the Mode setting to fine-tune the colors in your printout or turn off color management in
your printer software.
EPSON Standard (sRGB)
Increases the contrast in images.
Note: This is the standard mode for most photos and documents when not using an ICC profile.
Adobe RGB
Matches image colors to the Adobe RGB color standard. Use this setting if your source file was
captured in Adobe RGB.
PhotoEnhance
Lets you choose from various Scene Correction settings to automatically analyze your photos.
Note: PhotoEnhance uses a sophisticated face recognition technology to optimize photos that include
faces. For this to work, both eyes and the nose must be visible in the subject's face. If your photo
includes a face with an intentional color cast, such as a statue, you may want to turn off
PhotoEnhance to retain the special color effects.
ICM
Automatically adjusts colors based on the printer’s ICC profile and the selected Media Type setting,
using the Image Color Matching system. Click the Advanced button to choose the input profile and
other settings.
Note: In most cases, you get better results by applying color management in your application, rather
than in the printer driver.
Off (No Color Adjustment)
Turns off color management in your printer software so you can manage color using only your
application software.
Note: An ICC profile is required if color management is turned off.
65
Parent topic: Selecting Basic Print Settings - Windows
Advanced Color Controls - Windows
If you selected Custom as the Mode setting and Color Controls from the dropdown menu, you can
click the Advanced button to select detailed settings.
The Color Controls screen lets you specify values for adjusting brightness, contrast, saturation, and
individual Cyan, Magenta, and Yellow color tones. You can choose from two Printer Color Adjustment
modes and two Gamma settings, and use either a color circle or slide bar to adjust color.
Parent topic: Selecting Basic Print Settings - Windows
Paper Source Options - Windows
You can select any of the available options in the paper Source menu to print on the paper loaded in that
source.
Roll Paper
Selects roll paper loaded in the roll paper holder.
66
Roll Paper (Banner)
Selects roll paper loaded in the roll paper holder for a series of continuous images without any margin
space between them.
Sheet
Selects sheets of paper loaded in the sheet feeder.
Poster Board
Selects poster board or other thick media loaded in the cut sheet feed slot.
Parent topic: Selecting Basic Print Settings - Windows
67
Using Layout Manager - Windows
Layout Manager lets you create a poster or display by dragging multiple pieces of print data created in
different applications onto one sheet of paper for printing.
68
You can also place the same print data multiple times as shown here.
69
You can place print data in different sizes and orientations to maximize media usage, as shown here.
70
You can place print data on roll paper as shown here.
1. Open the file you want to print in your application.
2. Select the print command in your application.
71
3. Select Layout Manager on the Main tab and choose an option for the Size setting that matches the
size of the document in your application.
Note: You select the size of the paper you are printing on in a later step.
4. Click OK and then click Print, if necessary.
The Layout Manager screen opens and displays one page in the layout.
5. Leave the Layout Manager screen open and repeat steps 1 to 4 to arrange additional print data. The
pages are added to the Layout Manager screen.
72
6. Do the following to arrange objects on the Layout Manager screen:
• Drag pages to move and resize them.
• Use the tool buttons and the Object menu to align and rotate pages.
• Resize and replace whole pages in the Preference or Arrangement Settings screens.
Note: See the Layout Manager screen help for details.
7. Click File >Properties, then select your print settings, including the size of the paper you are
printing on, on the Main tab.
8. Click the File menu on the Layout Manager screen and click Print.
Note: To save the current job to a file, click the File menu on the Layout Manager screen, save the
file, and close the Layout Manager screen. To open the saved file later for editing or reprinting, right-
click the printer icon in the Windows taskbar, click Layout Manager, and open the file.
Parent topic: Selecting Basic Print Settings - Windows
73
Selecting Print Layout Options - Windows
You can select a variety of sizing and layout options for your document or photo on the Page Layout tab.
• To change the orientation of your printed document or photo, select the Portrait or Landscape
checkbox.
• To rotate or flip the printed image, select the Rotate 180° or Mirror Image checkbox.
• To select multiple copies and their print order, select the Copies,Collate, and Reverse Order
options.
74
• To change the size of your printed document or photo, select the Reduce/Enlarge checkbox and
select sizing options.
• To print multiple pages on one sheet of paper, or print one image on multiple sheets of paper, select
the Multi-Page checkbox and select the options you want.
• To print on both sides of the paper, select a Double-Sided Printing option
• To enlarge your image beyond the limits of your application program, select the Optimize
Enlargement checkbox.
Note: The driver can increase the image size up to 650% and decrease the output resolution to stay
within the pixel limitations. Depending on the resolution of the original image and the print size, you
may see reduced print quality.
• To print a color background on the page, select the Print Bckg Color checkbox and click Color
Settings to select the color you want to use.
• To print the time, date, and other information about your print job at the top or bottom of the page,
select the Job Settings checkbox and click Details to select the settings you want to use.
Reduce/Enlarge Options - Windows
Multi-Page Printing Options - Windows
Parent topic: Printing with Windows
Reduce/Enlarge Options - Windows
You can select any of the Reduce/Enlarge options to size your printed image.
Fit to Page
Sizes your printed image to fit on the paper you loaded and selected as the Output Paper setting.
Fit to Roll Paper Width
Sizes your printed image to fit the width of the roll paper you loaded.
Custom
Sizes your printed image by the percentage you select as the Scale to setting.
Parent topic: Selecting Print Layout Options - Windows
Multi-Page Printing Options - Windows
You can select these Multi-Page options to set up your multi-page print job.
N-up
Prints 2 (2-up) or 4 (4-up) pages on one sheet of paper.
75
Poster
Prints one image on multiple sheets of paper to create a large poster with or without borders. Click the
Settings button to select the layout and guideline options.
Parent topic: Selecting Print Layout Options - Windows
Selecting Additional Settings - Windows
You can run maintenance utilities and select additional settings that apply to all the print jobs you send to
your product.
1. Access the Windows Desktop and right-click the icon for your product in the right side of the
Windows taskbar, or click the up arrow and right-click .
2. Select Printer Settings.
3. Click the Utility tab.
76
You see a window like this:
4. Select any of the following options, as necessary:
•Nozzle Check to print a nozzle check pattern to check whether the print head nozzles are
clogged.
•Head Cleaning to clean the print head if you notice banding or gaps in your printouts.
•Print Head Alignment to align the print head if your printouts are blurry or have vertical or
horizontal lines.
•Epson Status Monitor 3 to check the printer's status.
77
•Monitoring Preferences to select the error notifications displayed on the Epson Status Monitor 3
screen, or add a shortcut to the utility in the Windows taskbar.
•Print Queue to display a list of all waiting print jobs, view information on the data waiting to be
printed, and delete or reprint the jobs.
•Language to select the language you want to use for the printer software screens.
•Printer and Option Information to adjust the printer's energy saving options.
•Speed and Progress to select various printing options.
•Menu Arrangement to arrange the Setting,Media Type, and Paper Size options by frequency of
use.
•Export or Import to save the print settings to a file or import them from a file. This is useful when
you want to select the same print settings on multiple computers.
•Epson Media Installer to create and manage custom paper configurations.
5. Click OK to close the printer software window.
Parent topic: Printing with Windows
Saving, Sharing, and Customizing the Printer Settings
You can save groups of print settings or media settings so you can reuse them for future print jobs. You
can export these settings as a file so you can share them with other users. You can also edit the settings
displayed in the printer software screens.
Saving and Sharing Print Settings - Windows
Saving and Sharing Media Settings - Windows
Editing Print Setting Displays - Windows
Parent topic: Printing with Windows
Saving and Sharing Print Settings - Windows
You can save your print settings so you can use them for future print jobs.
1. Select the print settings you want to save.
2. Click Save/Del at the top of the Main or Page Layout tab in your printer software.
78
You see a window like this:
3. Verify that your settings are correct, enter a name for the group of settings in the Name field, and
click Save.
Note: If you need to delete a group of settings you have created, select the name of the group of
settings from the list and click Delete.
4. Do the following as necessary:
• Select the name of the group of settings from the Select Setting list and use them to print.
• To export the settings, click Save/Del, select the name of the group of settings, click Export,
select a location, and enter a file name.
• To import a group of settings, click Save/Del, click Import, select the file you want to use, and
click Open. Then use the settings to print.
Parent topic: Saving, Sharing, and Customizing the Printer Settings
79
Saving and Sharing Media Settings - Windows
You can save and share settings you have selected for a particular media type so you can use them for
future print jobs.
1. Select the Media Settings you want to save on the Main tab, as necessary.
2. Click Custom Settings.
You see a window like this:
3. Verify that your settings are correct, enter a name for the media settings in the Name field, and click
Save.
Note: If you need to delete a group of settings you have created, select the name of the settings
from the list and click Delete.
80
4. Do the following as necessary:
• Select the name of a media setting as the Media Type setting and use it to print.
• To export the settings, click Custom Settings, select the name of the media settings, click
Export, select a location, and enter a file name.
• To import settings, click Custom Settings, select the name of the media settings, click Import,
select the file you want to use, and click Open. Then use these settings to print.
Parent topic: Saving, Sharing, and Customizing the Printer Settings
Editing Print Setting Displays - Windows
You can arrange the displayed print settings so you can easily select the settings you use most often.
1. Click the Utility tab in the printer software.
2. Select Menu Arrangement.
81
You see this window:
82
3. Select the item you want to edit.
4. Order or group items in the List box as follows:
• To move and reorder items, drag and drop them in the list.
• To add a new group (folder), click Add Group.
• To delete a group (folder), select the group and click Delete Group.
• To hide a group, drag and drop it to Not Display.
Note: If you delete a group, the group folder is deleted but the items within the folder remain.
5. Click Save.
83
Parent topic: Saving, Sharing, and Customizing the Printer Settings
Printing Your Document - Windows
Once you have selected your print settings, you are ready to save your settings and print.
1. Click OK to save your settings.
You see your application's Print window, such as this one:
2. Click OK or Print to start printing.
Checking Print Status - Windows
Parent topic: Printing with Windows
84
Checking Print Status - Windows
During printing, you see this window showing the progress of your print job. It allows you to control
printing and check ink cartridge status.
• To cancel printing, click Cancel.
• To see print jobs waiting to print, click Print Queue.
Parent topic: Printing Your Document - Windows
Selecting Default Print Settings - Windows
When you change your print settings in a program, the changes apply only while you are printing in that
program session. If you want to change the print settings you use in all your Windows programs, you can
select new default print settings.
1. Access the Windows Desktop and right-click the icon for your product in the right side of the
Windows taskbar, or click the up arrow and right-click .
2. Select Printer Settings.
85
You see the printer settings window:
3. Select the print settings you want to use as defaults in all your Windows programs.
4. Click OK.
These settings are now the defaults selected for printing. You can still change them as needed for
printing in any program session.
Parent topic: Printing with Windows
86
Changing the Language of the Printer Software Screens
You can change the language used on the Windows printer software screens.
1. Access the Windows Desktop and right-click the icon for your product in the right side of the
Windows taskbar, or click the up arrow and right-click .
2. Select Printer Settings.
You see the printer settings window.
3. Click the Utility tab.
You see these options:
87
4. Select the language you want to use as the Language setting.
5. Click OK to close the printer software window.
The printer software screens appear in the language you selected the next time you access them.
Parent topic: Printing with Windows
Changing Automatic Update Options
Your printer software for Windows automatically checks for updates to the product software. You can
change how often the software checks for updates or disable this feature.
1. Access the Windows Desktop and right-click the icon for your product in the right side of the
Windows taskbar, or click the up arrow and right-click .
2. Select Software Update Settings.
You see this window:
3. Do one of the following:
• To change how often the software checks for updates, select a setting in the Check every menu.
• To disable the automatic update feature, select the Never option.
4. Click OK to exit.
Note: If you choose to disable the automatic update feature, you can check for updates manually.
89
Using the Control Panel Menus
Follow the instructions in these sections to access the printer menu system and select settings.
Accessing the Printer's Menus
Maintenance Menu
Screen Customization Menu
Printer Settings Menu
Basic Settings Menu
Network Settings Menu
Restore Default Settings Menu
Printer Status/Print Menu
Accessing the Printer's Menus
You can use the printer menus to adjust the settings that control how your printer works.
1. Press the home button, if necessary.
2. Select Menu.
You see this screen:
90
3. Press the up or down arrow to scroll through the menus, or swipe up or down on the LCD screen.
Note: To return to the previous screen, press the left arrow.
4. Press the up or down arrow to move through the settings, or swipe up or down on the LCD screen.
5. To select a setting, press the setting name. You can also select a setting to toggle it on or off, as
shown below.
6. When you finish changing settings on a menu, press the left arrow to return to the previous menu or
press the home button to exit the menu system.
Parent topic: Using the Control Panel Menus
Maintenance Menu
Select > Maintenance to run nozzle checks, cleaning cycles, and other maintenance operations.
Caution: Follow the instructions in the topic links below the table to use these menu settings correctly.
Setting Description
Print Head Nozzle Check Prints a nozzle check pattern so you can check for clogged
nozzles
Print Head Cleaning Perform if the nozzle check pattern has faint or missing areas
91
Setting Description
Power Cleaning Perform if the nozzle check pattern still has faint or missing
areas after performing a head cleaning several times
Print Head Alignment Perform if your printouts become grainy or blurry or you notice
misalignment of vertical lines
Ink Cartridge(s) Replacement Moves the print head to the correct position so you can
replace ink cartridges. Displays the ink cartridge replacement
procedure.
Replace Maintenance Box Displays the maintenance box replacement procedure
Paper Guide Cleaning Perform if printouts are smeared when printing from the rear
paper feeder
Parent topic: Using the Control Panel Menus
Screen Customization Menu
Select > General Settings >Screen Customization to customize the LCD screen.
Setting Options Description
Background Color — Changes the color of the home screen.
Home Screen Standard
Supply Status
Selects the default screen to display as the
home screen
Print Screen Photo
Print Settings
Print Status
Selects the default screen to display when
printing
Parent topic: Using the Control Panel Menus
Printer Settings Menu
Select > General Settings >Printer Settings to customize paper and printing options.
92
Setting Options Description
Paper Setup Auto Display On
Off
Select On to display the Paper Setting screen
when loading paper in the rear paper feeder. If
you disable this feature, you cannot print from
an iPhone, iPad, or iPod touch using AirPrint.
Error Notice Paper Mismatch
Detect Paper
Meandering
Select On to display an error message when
the output size or paper type settings differ
between the driver and printer, or if the paper
is skewed
Horizontal Centered On
Off
Select On to print the image in the center of
the paper.
Thick Paper On
Off
Select On to prevent ink from smearing on
your printouts.
Parent topic: Using the Control Panel Menus
Basic Settings Menu
Select > General Settings >Basic Settings to customize to customize various display and power
settings.
Setting Options Description
Inside Light Auto
Manual
Adjusts the behavior of the internal
light. Set to Auto to turn the light on
when a print job is running. Select
Manual to use the icon on the LCD
screen to turn the light on or off.
LCD Brightness 1 to 9 Adjusts LCD screen brightness
93
Setting Options Description
Sounds Mute Turns on or off all sound
Button Press Adjusts the volume of control panel
sounds
Error Notice Adjusts the volume of error
notifications
Sound Type Adjusts the type of control panel
sounds
Sleep Timer 3 to 15 minutes Selects the amount of time before the
printer enters sleep mode
Power Off Timer Various times
Off
Selects the amount of time before the
printer turns off automatically
Date/Time Settings Date/Time Enters the date and time
Daylight Saving Time Select whether daylight savings is
active. If your area does not observe
daylight savings time, choose Winter.
Time Difference Sets the time difference for
coordinated universal time (UTC)
Language Various languages Selects the language used on the LCD
screen
Length Unit m
ft/in
Selects the unit of length displayed on
the LCD screen
Parent topic: Using the Control Panel Menus
Network Settings Menu
Select > General Settings >Network Settings to configure your printer's network settings.
Setting Options Description
Wi-Fi Setup Wi-Fi (Recommended)
Wi-Fi Direct
Set up or change wireless network settings.
94
Setting Options Description
Wired LAN Setup — Disables a Wi-Fi connection so that you can
connect to a network using a wired Ethernet
cable
Network Status Wired LAN Status Displays current communication status and
connection settings
Wi-Fi Direct Status
Print Status Sheet Prints the current network connection
information
Connection Check — Displays the network status and lets you print
a connection check report
Advanced — Displays advanced information, such as
TCP/IP settings. You can enable or disable
other network settings.
Parent topic: Using the Control Panel Menus
Restore Default Settings Menu
Select > General Settings >Restore Default Settings to reset settings to their defaults.
Setting Options Description
Network Settings — Resets all network settings
All Except Network Settings — Resets all except network settings
Clear All Data and Settings — Resets all control panel settings
Parent topic: Using the Control Panel Menus
Printer Status/Print Menu
Select > General Settings >Printer Settings to view current printer and network settings.
95
Setting Options Description
Print Status Sheet Configuration Status Sheet Prints a summary of current
printer settings
Supply Status Sheet Prints a summary of the status of
consumables
Usage History Sheet Prints a summary showing the
usages history of the printer
Network Wired LAN/Wi-Fi Status Displays current communication
status and connection settings
Wi-Fi Direct Status Displays the number of
connected devices and
connection settings
Print Status Sheet Prints the current network
connection information
Problem Checklist Checks for printer problems by
having you print some test pages
Firmware Version — Displays the firmware version for
the printer and any optional
accessories connected to it
Parent topic: Using the Control Panel Menus
96
Replacing Ink Cartridges and Maintenance Boxes
The maintenance box stores ink that gets flushed from the system during print head cleaning. When an
ink cartridge is expended or the maintenance box is at the end of its service life, you need to replace it.
You may also need to replace a cartridge that is more than six months old if your printouts do not look
their best, even after cleaning and aligning the print head.
Note: Please dispose of your used Epson branded ink cartridges and maintenance boxes responsibly
and in accordance with local requirements. If you would like to return your used ink cartridges and
maintenance boxes to Epson for proper disposal, please go to epson.com/recycle for more information.
Checking Ink Cartridge and Maintenance Box Status on the LCD Screen
Purchase Epson Ink Cartridges and Maintenance Box
Removing and Installing Ink Cartridges
Maintenance Box Replacement
Checking Ink Cartridge and Maintenance Box Status on the LCD Screen
You can select Ink Info on the product's home screen to check the status of the ink cartridges and
maintenance box. If the icon appears on an ink color or the maintenance box, you need to replace
them soon.
Parent topic: Replacing Ink Cartridges and Maintenance Boxes
Purchase Epson Ink Cartridges and Maintenance Box
U.S. and Canada:
You can purchase genuine Epson ink, maintenance boxes, and paper at epson.com (U.S. sales),
epson.ca (Canadian sales), or epson.com.jm (Caribbean sales). You can also purchase supplies from
an Epson authorized reseller. To find the nearest one, call 800-GO-EPSON (800-463-7766) in the U.S.
or 800-807-7766 in Canada.
Latin America:
You can purchase genuine Epson ink, maintenance boxes, and paper from an Epson authorized
reseller. To find the nearest reseller, visit epson.com.jm or call your nearest Epson sales office.
Note: This product is designed to work with genuine Epson inks. Non-Epson ink or any other ink not
specified for this printer could cause damage not covered by Epson's warranties.
97
Ink Cartridge and Maintenance Box Part Numbers
Parent topic: Replacing Ink Cartridges and Maintenance Boxes
Ink Cartridge and Maintenance Box Part Numbers
Use these part numbers when you order or purchase a new ink cartridge or maintenance box.
Note: For best printing results, use up a cartridge within one year of opening the package. Epson
recommends removing and shaking the ink cartridges once every six months.
Maintenance box part number: C12C935711
Ink color SureColor P700 (25 ml) SureColor P900 (50 ml)
Photo Black T7701 T46Y1
Cyan T7702 T46Y2
Vivid Magenta T7703 T46Y3
Yellow T7704 T46Y4
Light Cyan T7705 T46Y5
Vivid Light Magenta T7706 T46Y6
Gray T7707 T46Y7
Matte Black T7708 T46Y8
Light Gray T7709 T46Y9
Violet T7700 T46YD
Parent topic: Purchase Epson Ink Cartridges and Maintenance Box
Removing and Installing Ink Cartridges
Make sure you have your replacement cartridges handy before you begin. You must install new
cartridges immediately after removing the old ones.
Note: When you see a message on the LCD screen to replace an ink cartridge, you can select How To
to view on-screen instructions or the instructions below to replace the cartridge.
98
Note: Replace all expended ink cartridges. You cannot print if any of the ink cartridges are expended or
missing.
1. Turn on your product.
2. Open the front cover.
3. Open the printer cover.
99
4. Push down the tab to unlock the ink cartridge you are replacing.
5. Pull out the ink cartridge.
Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes,
flush them immediately with water. If discomfort or vision problems persist, see a doctor
immediately. If ink gets into your mouth, spit it out and see a doctor right away. Keep ink cartridges
out of the reach of children.
Note: Dispose of used cartridges carefully. Do not take the used cartridge apart or try to refill it.
100
6. Gently shake the new ink cartridge about 15 times.
7. Remove the new ink cartridge from the package.
101
Caution: Do not touch the areas shown here; doing so may prevent normal operation and printing.
8. Insert the new cartridge into the ink cartridge holder until it clicks into place.
102
9. After you replace all the cartridges that need replacing, close the printer cover.
10. Close the front cover.
Your product begins charging the ink delivery system.
Caution: If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and
store it in the same environment as the printer. The valve in the ink supply is designed to contain any
excess ink, but do not touch the ink supply port or surrounding area.
Parent topic: Replacing Ink Cartridges and Maintenance Boxes
103
Maintenance Box Replacement
The maintenance box stores surplus ink that gets collected during printing or print head cleaning. When
you see a message on the LCD screen, follow the on-screen instructions to replace the maintenance
box.
Note the following precautions when replacing the maintenance box:
• Do not remove the maintenance box or its cover except when replacing the maintenance box;
otherwise, ink may leak.
• Do not touch the green chip on the side of the maintenance box.
• Do not tilt the maintenance box after removing it or ink may leak.
• Do not touch the openings in the maintenance box or you may get ink on you.
• Do not drop the maintenance box or subject it to strong shocks.
• If you cannot replace the cover, the maintenance box may not be installed correctly. Remove and
reinstall the maintenance box.
• Do not store the maintenance box in high or freezing temperatures.
• Do not replace the maintenance box during printing; otherwise, ink may leak.
• Keep the maintenance box out of direct sunlight.
Caution: Do not reuse a maintenance box that has been removed and left uninstalled for a long period.
Keep the maintenance box away from direct sunlight.
Note: The maintenance box is a user-replaceable part and is not covered by the product warranty.
Parent topic: Replacing Ink Cartridges and Maintenance Boxes
104
Adjusting Print Quality
If your print quality declines, you may need to run a utility to clean or align the print head.
If running these utilities does not solve the problem, you may need to replace the ink cartridges.
Print Head Maintenance
Print Head Alignment
Cleaning the Paper Guide
Print Head Maintenance
If your printouts become too light, or you see dark or light bands across them, you may need to clean the
print head nozzles. Cleaning uses ink, so clean the nozzles only if print quality declines.
You can check for clogged nozzles before you clean them so you don’t clean them unnecessarily.
Note: You cannot clean the print head if an ink cartridge is expended, and may not be able to clean it
when a cartridge is low. You must replace the cartridge first.
Print Head Nozzle Check
Print Head Cleaning
Parent topic: Adjusting Print Quality
Print Head Nozzle Check
You can print a nozzle check pattern to check for clogged nozzles.
Checking the Nozzles Using the Product Control Panel
Checking the Nozzles Using a Computer Utility
Parent topic: Print Head Maintenance
Checking the Nozzles Using the Product Control Panel
You can check the print head nozzles using the control panel on your product.
1. Load a few sheets of plain paper in the rear paper feeder.
2. Select the icon on the LCD screen
3. Select Maintenance >Print Head Nozzle Check.
4. Select Start.
105
The nozzle pattern prints.
5. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
6. Do one of the following:
• If there are no gaps, select O.
• If there are gaps or the pattern is faint, select Xand continue.
7. Follow the instructions on the screen to clean the print head, check the nozzles, and repeat the
process as necessary.
Parent topic: Print Head Nozzle Check
Checking the Nozzles Using a Computer Utility
You can check the print head nozzles using a utility on your Windows or Mac computer.
1. Load a few sheets of plain paper in the rear paper feeder.
2. Do one of the following:
•Windows: Access the Windows Desktop and right-click the icon for your product in the right
side of the Windows taskbar, or click the up arrow and right-click .
•Mac: In the Apple menu or the Dock, select System Preferences. Select Print & Fax,Print &
Scan, or Printers & Scanners, select your product, and select Options & Supplies. Select
Utility and select Open Printer Utility.
106
3. Select Print Head Nozzle Check.
You see a window like this:
4. Click Print.
107
5. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
6. If there are no gaps, click Finish.
If there are gaps or the pattern is faint, clean the print head. If almost the entire pattern is missing,
see the link below for instructions on performing a Power Cleaning.
Parent topic: Print Head Nozzle Check
Print Head Cleaning
If print quality has declined and the nozzle check pattern indicates clogged nozzles, you can clean the
print head.
Note: You cannot clean the print head if an ink cartridge is expended, and may not be able to clean it
when a cartridge is low. You must replace the cartridge first.
Cleaning the Print Head Using the Product Control Panel
Cleaning the Print Head Using a Computer Utility
Running a Power Cleaning Using the Product Control Panel
Parent topic: Print Head Maintenance
Cleaning the Print Head Using the Product Control Panel
You can clean the print head using the control panel on your product.
108
1. Load a few sheets of plain paper in the rear paper feeder.
2. Select the icon on the LCD screen
3. Select Maintenance >Print Head Nozzle Check.
4. Select Start.
When the cleaning cycle is finished, you see a message on the screen.
Caution: Never turn off the product during a cleaning cycle or you may damage it.
5. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
• If there are no gaps, select O.
• If there are gaps or the pattern is faint, select Xand continue.
6. Follow the instructions on the screen to clean the print head, check the nozzles, and repeat the
process as necessary.
If you don’t see any improvement after cleaning the print head up to 3 times, wait at least 6 hours. Then
try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or
damaged and needs to be replaced.
Parent topic: Print Head Cleaning
109
Cleaning the Print Head Using a Computer Utility
You can clean the print head using a utility on your Windows or Mac computer.
1. Load a few sheets of plain paper in the rear paper feeder.
2. Do one of the following:
•Windows: Access the Windows Desktop and right-click the icon for your product in the right
side of the Windows taskbar, or click the up arrow and right-click .
•Mac: In the Apple menu or the Dock, select System Preferences. Select Print & Fax,Print &
Scan, or Printers & Scanners, select your product, and select Options & Supplies. Select
Utility and select Open Printer Utility.
3. Select Print Head Cleaning.
You see a window like this:
110
4. Click Start to begin the cleaning cycle.
You see a message on the computer screen during the cleaning cycle.
Caution: Never turn off the product during a cleaning cycle or you may damage it.
5. When the cleaning cycle is finished, you can check to see if the nozzles are clean; click Print Nozzle
Check Pattern and click Print.
6. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
• If there are no gaps, click Finish.
• If there are gaps or the pattern is faint, click Clean to clean the print head again.
If you don’t see any improvement after cleaning the print head up to 3 times, turn off the product and wait
at least six hours. Then try cleaning the print head again. If quality still does not improve, run a Power
Cleaning. If there is still no improvement, contact Epson support.
Parent topic: Print Head Cleaning
Running a Power Cleaning Using the Product Control Panel
If print head nozzles are still clogged after cleaning the print head several times, run the Power
Cleaning utility from the product control panel. This process consumes a lot of ink to clean the clogged
nozzles.
1. Load a few sheets of plain paper in the rear paper feeder.
111
2. Select the icon on the LCD screen
3. Select Maintenance >Power Cleaning.
4. Select Start to begin the power cleaning cycle.
Caution: Never turn off the product during a cleaning cycle or you may damage it.
5. When the cleaning cycle is finished, print the nozzle check pattern again to see if any nozzles are
still clogged.
If nozzles are still clogged, wait for at least 6 hours without printing. Then try cleaning the print head
again. If there is still no improvement, contact Epson for support.
Parent topic: Print Head Cleaning
Print Head Alignment
If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or
light horizontal bands, you may need to align the print head.
Note: Banding may also occur if your print head nozzles need cleaning.
Aligning the Print Head Using the Product Control Panel
Aligning the Print Head Using a Computer Utility
Parent topic: Adjusting Print Quality
Aligning the Print Head Using the Product Control Panel
You can align the print head using the control panel on your product.
1. Load a few sheets of plain paper in the rear paper feeder.
2. Select the icon on the LCD screen
3. Select Maintenance >Print Head Alignment.
4. Select Start to print an alignment sheet.
Note: Do not cancel printing while you are printing head alignment patterns.
After the alignment sheet is printed, you see a series of screens asking you to select the best square
in each pattern set.
112
5. Check the printed pattern and follow the on-screen instructions to choose the number of the best
printed pattern for each set.
Parent topic: Print Head Alignment
Aligning the Print Head Using a Computer Utility
You can align the print head using a utility on your Windows or Mac computer.
1. Load a few sheets of plain paper in the product.
2. Do one of the following:
•Windows: Access the Windows Desktop and right-click the icon for your product in the right
side of the Windows taskbar, or click the up arrow and right-click .
•Mac: In the Apple menu or the Dock, select System Preferences. Select Print & Fax,Print &
Scan, or Printers & Scanners, select your product, and select Options & Supplies. Select
Utility and select Open Printer Utility.
3. Select Print Head Alignment.
4. Click Next, then click Print to print an alignment sheet.
Note: Do not cancel printing while you are printing a head alignment pattern.
You see a window like this:
5. Check the printed pattern and follow the instructions on the screen to choose the number of the best
printed pattern for each set.
• After choosing a pattern number, click Next.
• If no patterns are aligned in one or more of the sets, choose the closest one in each set and click
Realignment. Then print another alignment sheet and check it.
Note: Click Skip (where available) if you want to skip a particular alignment sheet.
6. When you are done, click Finish.
113
Parent topic: Print Head Alignment
Cleaning the Paper Guide
If you see ink on the back of a printout, you can clean the paper guide rollers to remove any excess ink.
1. Load a few sheets of the following size paper in the rear paper feeder: A3 (11.7 × 16.5 inches
[297 × 420 mm]) or A3+ (13 × 19 inches [329 × 483 mm]) for SureColor P700 and A2 (16.5 × 23.4
inches [420 × 594 mm]) for SureColor P900.
2. Select the icon on the LCD screen.
3. Select Maintenance >Paper Guide Cleaning.
4. Follow the on-screen instructions to clean the paper path.
5. Repeat these steps as necessary until no smeared ink appears on your printouts.
Parent topic: Adjusting Print Quality
114
Maintenance and Transportation
See the instructions in these sections to maintain your printer for optimum results, or to move or
transport your printer.
Cleaning Your Product
Transporting Your Product
Cleaning Your Product
To keep your product working at its best, you should clean it several times a year.
Caution: Do not use a hard brush, benzene, alcohol, or paint thinner to clean the product or you may
damage it. Do not place anything on top of the cover or use the cover as a writing surface, or it could get
permanently scratched. Do not use oil or other lubricants inside the product or let water get inside.
1. Turn off the product.
2. Unplug the power cable.
3. Disconnect any connected cables.
4. Remove all the paper and the roll paper unit from the product.
5. Close the paper support, rear paper feeder, output tray, and any covers.
6. Clean the outer case, except for the front cover, with a soft cloth dampened with a mild detergent.
For the front cover, use a feather duster to clean the surface.
7. Plug the power cable back in and turn on the product.
8. Load several sheets of plain paper (or a cleaning sheet) in the sheet feeder and clean the paper
guide.
Close the rear paper support and output tray when you are not using the product to help keep it clean.
Parent topic: Maintenance and Transportation
Transporting Your Product
If you need to store your product or transport it a long distance, prepare it for transportation as described
here.
Caution: During transportation and storage, follow these guidelines:
• Avoid tilting the product, placing it vertically, or turning it upside down; otherwise ink may leak.
115
• Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent
the product from printing.
Note: Before storing your product for a long period, replace low, expended, or expired ink to help
prevent the print head from drying out. Store your product in a cool, dry place.
1. Turn off the product.
2. Unplug the power cable.
3. Disconnect any connected cables.
4. Remove all the paper from the product.
5. Open the printer cover and secure the print head to the case with tape.
6. Close the printer cover.
7. Prepare the printer for transportation as shown.
8. Place the product in its original packing materials, if possible, or use equivalent materials with
cushioning around the product. Make sure the box adequately protects the product control panel.
9. After unpacking the product, be sure to remove the tape from the print head.
Keep the product level during transportation. If print quality has declined when you print again, clean and
align the print head.
Parent topic: Maintenance and Transportation
116
Solving Problems
Check these sections for solutions to problems you may have using your product.
Checking for Software Updates
Product Status Messages
Running a Product Check
Resetting Control Panel Defaults
Solving Setup Problems
Solving Network Problems
Solving Paper Problems
Solving Problems Printing from a Computer
Solving Page Layout and Content Problems
Solving Print Quality Problems
Uninstall Your Product Software
Where to Get Help
Checking for Software Updates
Periodically, it's a good idea to check Epson's support website for free updates to your product software.
Visit epson.com/support (U.S.), epson.ca/support (Canada), or epson.com.jm/support (Caribbean) and
select your product.
•Windows: Your printer software automatically checks for updates. You can also manually update the
software by:
• Accessing the Windows Desktop and right-clicking the icon for your product in the right side of
the Windows taskbar, or clicking the up arrow and right-clicking . Select Software Update.
• Clicking on the Utility tab in the printer settings window and selecting Driver Update
You can also update the software by selecting EPSON Software Updater in the EPSON or EPSON
Software program group, accessible by the Start button, or on the Start or Apps screens, depending
on your version of Windows.
•OS X: You can manually update the software by opening the Applications >Epson Software folder
and selecting EPSON Software Updater.
Parent topic: Solving Problems
117
Product Status Messages
You can often diagnose problems with your product by checking the messages on its LCD screen.
Note: If the LCD screen is dark, press the screen to wake the product from sleep mode.
LCD screen message Condition/solution
The combination of the IP address
and the subnet mask is invalid. See
your documentation for more details.
There is a problem with the network configuration of your
product. Enter the correct IP address or default gateway. If
applicable, contact your network administrator for assistance.
Ink is low. The ink cartridge is low. You can continue printing until you are
prompted to replace the cartridge. Make sure you have the
replacement cartridge ready.
Ink cartridge(s) are low. Print job may
not print completely.
Select Continue printing or Replace before printing. If the
product runs out of ink in the middle of the print job, the product
will stop printing and you will be given the option to replace the
ink cartridge. The color of your print job may be slightly different
after replacing an ink cartridge.
You need to replace Ink Cartridge(s). The ink cartridge is expended. Replace the cartridge.
To use cloud services, update the
root certificate from the Epson Web
Config utility.
Access your product's built-in Web Config utility and update the
root certificate for your product.
The printer's Ink Pad is nearing the
end of its service life. It is not a user-
replaceable part. Please contact
Epson support.
The ink pad is near the end of its service life and the message
will be displayed until the ink pad is replaced. Contact Epson for
support. (To resume printing, select OK.)
The printer's Ink Pad has reached
the end of its service life. It is not a
user-replaceable part. Please
contact Epson support.
The ink pad is at the end of its service life. Contact Epson for
support.
The ink pad has reached the end of
its service life. It is not a user-
replaceable part. Please contact
Epson support. If you use it as is,
printing speed on [paper type] may
slow down.
118
LCD screen message Condition/solution
Printer error. Turn the power off and
on again. If the problem persists,
contact Epson Support.
A serious error has occurred. Turn the product off and then back
on again. If the error continues, check for a paper jam. If there is
no paper jam, contact Epson for support.
Paper Setup Auto Display is set to
Off. Some features may not be
available. For details, see your
documentation.
If Paper Setup Auto Display setting is disabled, you cannot use
AirPrint.
Recovery Mode
Update Firmware
An error has occurred during firmware updating. Connect your
product using a USB cable and try updating the firmware again.
If you still receive this error message, contact Epson for support.
Note: The ink pads in the printer collect, distribute, and contain the ink that is not used on printed pages.
During the life of your product it may reach a condition where either satisfactory print quality cannot be
maintained or the ink pads have reached the end of their usable life. The Epson Status Monitor, your
LCD screen, or lights on the control panel will advise you when these parts need replacing. If this
happens during the standard warranty of the product, the exchange of the product or replacement of the
pads is covered under the standard warranty. If the product is out of warranty, the pads can be replaced
by any Epson authorized service provider. The waste ink pads are not a user-replaceable part.
Parent topic: Solving Problems
Running a Product Check
Running a product check helps you determine if your product is operating properly.
1. Disconnect any interface cables connected to your product.
2. Make sure plain paper is loaded in the rear paper feeder.
3. Select the icon on the LCD screen
4. Select Maintenance >Print Head Nozzle Check.
5. Follow the on-screen instructions to print the nozzle check pattern.
The nozzle pattern prints.
6. Do one of the following, depending on the results of the product check:
• If the page prints and the nozzle check pattern is complete, the product is operating properly. Any
operation problem you may have could be caused by your computer, cable, software, or selected
119
settings. Check the other solutions in this manual or try uninstalling and reinstalling your printer
software.
• If the page prints but the nozzle check pattern has gaps, clean or align the print head.
• If the page does not print, the product may have a problem. Check the other solutions available. If
they do not work, contact Epson.
Parent topic: Solving Problems
Resetting Control Panel Defaults
If you have a problem with settings on the product control panel, you can reset them to their factory
defaults. You can choose which settings to reset or reset them all.
1. Select the icon on the LCD screen
2. Select General Settings >Restore Default Settings.
3. Select one of these options:
•Network Settings: Resets all network settings.
•All except Network Settings: Resets all except network settings.
•Clear All Data and Settings: Resets all control panel settings.
Parent topic: Solving Problems
Solving Setup Problems
Check these sections if you have problems while setting up your product.
Noise After Ink Installation
Software Installation Problems
Parent topic: Solving Problems
Noise After Ink Installation
If you hear noises from your product after installing ink, check the following:
• The first time you install the ink cartridges, the product must charge its print head. Wait until charging
finishes before you turn off the product, or it may charge improperly and use excess ink the next time
you turn it on.
• If the product's print head stops moving or making noise, and the charging process has not finished
after approximately 5 minutes, turn off your product. Turn it back on and check to see if charging is still
in progress. If it is still in progress, contact Epson for help.
120
Parent topic: Solving Setup Problems
Software Installation Problems
If you have problems while installing your product software, try these solutions:
• Make sure your product is turned on and any necessary cables are securely connected at both ends. If
you still have problems installing software, disconnect the cable and carefully follow the instructions on
the Start Here sheet. Also make sure your system meets the requirements for your operating system.
• Close any other programs, including screen savers and virus protection software, and install your
product software again.
• In Windows, make sure your product is selected as the default printer and the correct port is shown in
the printer properties.
• If you see any error message or your software does not install correctly in Windows, you may not have
software installation privileges. Contact your system administrator.
• If you are printing over a network, make sure your product is set up properly on the network.
Parent topic: Solving Setup Problems
Solving Network Problems
Check these solutions if you have problems setting up or using your product on a network.
Product Cannot Connect to a Wireless Router or Access Point
Network Software Cannot Find Product on a Network
Product Does Not Appear in Mac Printer Window
Cannot Print Over a Network
Parent topic: Solving Problems
Product Cannot Connect to a Wireless Router or Access Point
If your product has trouble finding or connecting to a wireless router or access point, try these solutions:
• If you are connecting the product via Wi-Fi Protected Setup (WPS) and the Wi-Fi icon on your
product's LCD screen is not lit or does not appear, make sure you select one of the WPS options from
the product control panel within 2 minutes of pressing the WPS button on your router.
• Make sure to place your product within contact range of your router or access point. Avoid placing
your product near a microwave oven, cordless phone, or large metal object, such as a filing cabinet.
121
Note for Latin America: If you are using a 5 GHz wireless router, set the router to operate in dual
band (2.4 GHz and 5 GHz) mode. If your router uses a single network name (SSID) for both the
2.4 GHz and 5 GHz band, give each band its own network name (SSID) instead, such as Home
Network 2.4 GHz and Home Network 5 GHz. See your router documentation or contact your internet
service provider for instructions.
• Verify that your router or access point is operating correctly by connecting to it from your computer or
another device.
• Print a network connection report and check the codes and messages on the report to help determine
the cause of the problem.
• You may need to disable the firewall and any anti-virus software on your wireless router or access
point.
• Try restarting your router following the instructions in your router documentation.
Note: If you are reading these instructions online, you will lose your Internet connection when you
restart your router.
• Check to see if access restrictions, such as MAC address filtering, are set on the router or access
point. If access restrictions are set, add your product's MAC address to your router's address list. To
obtain your product's MAC address, print a network status sheet. Then follow the instructions in your
router or access point documentation to add the address to the list.
• If your router or access point does not broadcast its network name (SSID), follow the instructions that
came with your product to enter your wireless network name manually.
• If your router or access point has security enabled, determine the kind of security it is using and any
required password or passphrase for connection. Then make sure to enter the exact WEP key or WPA
passphrase correctly.
• Check if your computer is restricting the available wireless channels. If so, verify that your wireless
access point is using one of the usable channels and change to a usable channel, if necessary.
• If you cannot connect your product to a device using Wi-Fi Direct, you may have exceeded the
maximum number of devices connected to your product (8). Print a network status sheet or access
Web Config on the browser for your device and check the number of connected devices. If 8 devices
are already connected, disconnect a device by deleting the product's SSID from the Wi-Fi screen of
that device. If fewer than 8 devices are connected, check the accuracy of your other network settings,
move your device closer to your product, and try connecting again.
• If you are using a Wi-Fi Direct connection that suddenly disconnects, the Wi-Fi direct password on
your device may have been changed. If necessary, delete the existing DIRECT-xxxxxxxx connection
settings from your device and enter a new password. See your device documentation for instructions.
122
• If you connected your product to a Windows computer using Wi-Fi Direct and it automatically selected
Access Point Mode, you may have trouble accessing a low-priority Internet connection. Check the
network connection or adapter settings in the Windows Control Panel and set the Internet metric
setting to 100 for your version of the Internet Protocol.
Parent topic: Solving Network Problems
Network Software Cannot Find Product on a Network
If EpsonNet Setup cannot find your product on a network, try these solutions:
• Make sure your product is turned on and connected to your network. Verify the connection using your
product control panel.
• Check if your network name (SSID) contains non-ASCII characters. Your product cannot display non-
ASCII characters.
• Print a network connection report and check the codes and messages on the report to help determine
the cause of the problem.
• Make sure your product is not connected to a guest network.
• If necessary, reinstall your product software and try running EpsonNet Setup again:
1. Reset your product's network settings to their factory defaults.
2. Windows only: Uninstall your product software.
3. Restart your router following the instructions in your router documentation.
Note: If you are reading these instructions online, you will lose your Internet connection when you
restart your router, so note the next step before restarting it.
4. Download your product software from the Epson website using the instructions on the Start Here
sheet.
• If you have replaced your router, reinstall your product software to connect to the new router.
Note for Latin America: If you are using a 5 GHz wireless router, set the router to operate in dual
band (2.4 GHz and 5 GHz) mode. If your router uses a single network name (SSID) for both the
2.4 GHz and 5 GHz band, give each band its own network name (SSID) instead, such as Home
Network 2.4 GHz and Home Network 5 GHz. See your router documentation or contact your internet
service provider for instructions.
123
• Check to see if your wireless router or access point has an enabled Privacy Separator function that is
preventing detection of your device over the network. See your router or access point documentation
for instructions on disabling the Privacy Separator function.
Parent topic: Solving Network Problems
Product Does Not Appear in Mac Printer Window
If your product does not appear in the Mac printer window, try these solutions:
• Turn your product off, wait 30 seconds, then turn it back on again.
• If you are connecting the product wirelessly via EpsonNet Setup and a WiFi symbol is not displayed on
the product's LCD screen, make sure your product software was installed correctly. If necessary,
reinstall your software.
• Make sure you installed your product software correctly for your network. See the Start Here sheet for
instructions.
• If your Mac includes both wired and wireless network services, make sure the network to which you
connected your product is at the top of the Set Service Order list. Check your Mac documentation for
instructions.
Note for Latin America: If you are using a 5 GHz wireless router, set the router to operate in dual
band (2.4 GHz and 5 GHz) mode. If your router uses a single network name (SSID) for both the
2.4 GHz and 5 GHz band, give each band its own network name (SSID) instead, such as Home
Network 2.4 GHz and Home Network 5 GHz. See your router documentation or contact your internet
service provider for instructions.
•Parent topic: Solving Network Problems
Cannot Print Over a Network
If you cannot print over a network, try these solutions:
• Make sure that your product is turned on.
• Make sure you install your product's network software as described in your product documentation.
• Print a network status sheet and verify that the network settings are correct. If the network status is
Disconnected, check any cable connections and turn your product off and then on again.
• Print a network connection report and check the codes and messages on the report to help determine
the cause of the problem.
• If you are using TCP/IP, make sure the product's IP address is set correctly for your network. If your
network does not assign IP addresses using DHCP, set the IP address manually.
124
• Make sure your computer and product are both using the same wireless network.
• If network printing is slow, print a network status sheet and check the signal strength. If it is poor, place
your product closer to your router or access point. Avoid placing your product near a microwave oven,
cordless phone, or large metal object, such as a filing cabinet.
Note for Latin America: If you are using a 5 GHz wireless router, set the router to operate in dual
band (2.4 GHz and 5 GHz) mode. If your router uses a single network name (SSID) for both the
2.4 GHz and 5 GHz band, give each band its own network name (SSID) instead, such as Home
Network 2.4 GHz and Home Network 5 GHz. See your router documentation or contact your internet
service provider for instructions.
• Try restarting your router following the instructions in your router documentation.
Note: If you are reading these instructions online, you will lose your Internet connection when you
restart your router.
• Check if there are any paused print jobs.
• Make sure your printer is selected as the default printer.
• Check to see if your wireless router or access point has an enabled Privacy Separator function that is
preventing printing from a device over the network. See your router or access point documentation for
instructions on disabling the Privacy Separator function.
• If you are connecting the product via Wi-Fi Protected Setup (WPS) and the Wi-Fi icon on your
product's LCD screen is not lit, make sure you select one of the WPS options from the product control
panel within 2 minutes of pressing the WPS button on your router.
• Check your wired LAN router or access point to see if the LED for the port to which your product is
connected is on or flashing. If the link LED is off, try the following:
• Make sure the Ethernet cable is securely connected to your product and to your router, access
point, switch, or hub.
• Try connecting your product to a different port or a different router, access point, switch, or hub.
• Try connecting with a different Ethernet cable.
• Try printing to your product from another computer on the network.
Parent topic: Solving Network Problems
Solving Paper Problems
Check these sections if you have problems using paper with your product.
125
Paper Feeding Problems
Paper Ejection Problems
Parent topic: Solving Problems
Paper Feeding Problems
If you have problems feeding paper, try these solutions:
• If paper does not feed into the sheet feeder, remove the paper and fan the edges to separate the
sheets. Reload paper against the right side and slide the edge guide against it. Do not load too many
sheets in the sheet feeder at once and make sure the product cover is closed.
• When using the sheet feeder, do not load paper above the arrow mark on the left edge guide. Load
only one sheet of compatible paper when using the front manual feed tray.
• Load only one sheet of media in the front manual feed tray. For posterboard, make sure there is
enough space behind the product for the media to feed through.
• If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it.
• If you can not insert paper easily into the front manual feed tray, make sure the paper is perfectly flat
and not curled.
• If you are printing on roll paper or with the sheet feeder, make sure the manual feed tray is not
extended. Extend it only to load fine art paper or posterboard.
• If paper loaded using the front manual feed tray does not feed, make sure you installed the paper
correctly and guided it all the way into the product.
• Do not load more than the recommended number of sheets.
• Make sure paper is loaded in the correct orientation. Load cut sheets in the sheet feeder vertically.
• Make sure your paper meets the specifications for your product.
• If paper dust builds up on the rollers, they may lose traction and become unable to feed paper
properly. Clean the paper guide.
• If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary.
Then reload the paper.
• If thick media does not feed, make sure you are loading it straight into the product, not at an angle.
• If paper jams when you print on both sides of the paper, try loading fewer sheets.
• For best results, follow these guidelines:
• Use new, smooth, high-quality paper that is not damp, curled, creased, old, too thin, or too thick.
• Load paper printable side up.
126
• Follow any special loading instructions that came with the paper.
Parent topic: Solving Paper Problems
Paper Ejection Problems
If you have problems with paper ejecting properly, try these solutions:
• If paper does not eject fully, you may have set the wrong paper size. Cancel printing using the product
control panel, then select the option to cut or eject the paper. Remove any paper remaining in the
product. Select the correct size when you reprint.
• If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select
the correct paper type setting in your printer software when you reprint.
Parent topic: Solving Paper Problems
Solving Problems Printing from a Computer
Check these sections if you have problems while printing from your computer.
Nothing Prints
Product Icon Does Not Appear in Windows Taskbar
Error After Cartridge Replacement
Printing is Slow
Parent topic: Solving Problems
Nothing Prints
If you have sent a print job and nothing prints, try these solutions:
• Make sure your product is turned on.
• Make sure any interface cables are connected securely at both ends.
• If you connected your product to a USB hub, make sure it is a first-tier hub. If it still does not print,
connect your product directly to your computer instead of the hub.
• Run a product check to see if a test page prints. If the test page prints, check to see if your product
software is installed correctly.
• In Windows, make sure your product is selected as the default printer.
127
• In Windows, clear any stalled print jobs from the Windows Spooler:
•Windows 10: Click and select (Settings) >Devices >Printers & scanners. Select your
product name and select Manage >Open print queue. Right-click the stalled print job, click
Cancel, and click Yes.
•Windows 8.x: Navigate to the Apps screen and select Control Panel >Hardware and Sound >
Devices and Printers. Right-click your product name, select See what's printing, and select your
product name again if necessary. Right-click the stalled print job, click Cancel, and click Yes.
•Windows 7: Click and select Devices and Printers. Right-click your product name, select See
what's printing, and select your product name again, if necessary. Right-click the stalled print job,
click Cancel, and click Yes.
Parent topic: Solving Problems Printing from a Computer
Product Icon Does Not Appear in Windows Taskbar
If you do not see your product icon in the Windows taskbar, first try restarting your computer. If that does
not work, try this solution:
1. Do one of the following:
•Windows 10: Click and select (Settings) > Devices >Printers & scanners. Select your
product name and select Manage >Printing preferences.
•Windows 8.x: Navigate to the Apps screen and select Control Panel >Hardware and Sound >
Devices and Printers. Right-click your product name, select Printing Preferences, and select
your product name again if necessary.
•Windows 7: Click and select Devices and Printers. Right-click your product name, select
Printing Preferences, and select your product name again if necessary.
2. Click the Utility tab.
3. Click the Monitoring Preferences button.
4. Click the checkbox for the option that adds the shortcut icon to the taskbar.
5. Click OK to close the open program windows.
Parent topic: Solving Problems Printing from a Computer
Error After Cartridge Replacement
If you see an error message after you replace an ink cartridge, follow these steps:
1. Remove and reinsert the replaced ink cartridge, making sure to push it all the way into its slot.
128
2. Complete the ink cartridge installation steps.
Parent topic: Solving Problems Printing from a Computer
Printing is Slow
If printing becomes slow, try these solutions:
• Make sure your system meets the requirements for your operating system. If you are printing a high-
resolution image, you may need more than the minimum requirements. If necessary, increase your
system's memory.
• If you are using Windows 7, close the Devices and Printers window before you print.
• On a Mac, make sure you download and install the Epson printer driver.
• Clear space on your hard drive or run a defragmentation utility to free up existing space.
• Close any programs you are not using when you print.
• If your product is connected to a USB hub, connect it directly to your computer instead.
• If printing becomes slower after printing continuously for a long time, the product may have
automatically slowed down to protect the print mechanism from overheating or becoming damaged.
Let the product rest with the power on for 30 minutes, then try printing again.
• If you are printing over a wireless network, factors such as interference, network traffic, or weak signal
strength may affect your printing speed.
Note for Latin America: If you are using a 5 GHz wireless router, set the router to operate in dual
band (2.4 GHz and 5 GHz) mode. If your router uses a single network name (SSID) for both the
2.4 GHz and 5 GHz band, give each band its own network name (SSID) instead, such as Home
Network 2.4 GHz and Home Network 5 GHz. See your router documentation or contact your internet
service provider for instructions.
For the fastest printing, select the following settings in your product software:
• Make sure the paper type setting matches the type of paper you loaded.
• Turn on any high speed settings in your product software.
• Select a lower print quality setting.
•Windows: Click the Maintenance or Utility tab, select Extended Settings or Speed and Progress,
and select the following settings:
•Always Spool RAW Datatype
•Page Rendering Mode
129
•Print as Bitmap
If printing is still slow and you are using Windows 7 or Windows Vista, try the following:
1. Click and select Computer or My Computer. Double-click the C: drive and open these folders:
ProgramData > EPSON > PRINTER.
Note: If you do not see the ProgramData folder, open the Organize menu and select Folder and
search options. In the window that appears, click the View tab, select Show hidden files, folders,
and drives in the Advanced settings list, and click OK.
2. Right-click the EPAUDF01.AUD file and select Delete.
3. Restart your computer and try printing again.
Parent topic: Solving Problems Printing from a Computer
Solving Page Layout and Content Problems
Check these sections if you have problems with the layout or content of your printed pages.
Inverted Image
Too Many Copies Print
Blank Pages Print
Incorrect Margins on Printout
Border Appears on Borderless Prints
Incorrect Characters Print
Incorrect Image Size or Position
Slanted Printout
Parent topic: Solving Problems
Inverted Image
If your printed image is inverted unexpectedly, try these solutions:
• Turn off any mirror or inversion settings in your printing application.
• Turn off the Mirror Image,Flip horizontally, or Reverse page orientation settings in your printer
software. (This option has different names, depending on your operating system version.)
Parent topic: Solving Page Layout and Content Problems
130
Too Many Copies Print
Make sure that the Copies setting in your printing program or printer software is not set for multiple
copies.
Parent topic: Solving Page Layout and Content Problems
Blank Pages Print
If blank pages print unexpectedly, try these solutions:
• Make sure you selected the correct paper size settings in your printing program and printer software.
• If a blank page exists in a document you are printing and you want to skip printing it, select the Skip
Blank Page setting in your printer software, if available.
• Run a print head nozzle check to see if any of the nozzles are clogged. Then clean the print head, if
necessary.
• Make sure your product is selected as the printer in your printing program.
Parent topic: Solving Page Layout and Content Problems
Incorrect Margins on Printout
If your printed page has incorrect margins, try these solutions:
• Make sure you selected the correct paper size settings in your printing program and printer software.
• Make sure you selected the correct margins for your paper size in your printing program.
• Make sure your paper is positioned correctly for feeding into the product.
You can use the preview option in your printer software to check your margins before you print.
Parent topic: Solving Page Layout and Content Problems
Border Appears on Borderless Prints
If you see a border on borderless prints, try these solutions:
• Make sure you are printing on a compatible borderless paper type and size.
Note: For custom paper sizes, make sure you select a supported borderless page width.
•Windows: Make sure you selected the Borderless setting in your printer software.
•Mac: Make sure you selected the Borderless checkbox or a paper size with a Borderless option in
your printer software.
131
• Adjust the Expansion setting to adjust the amount of image expansion on the edges of borderless
prints.
• Make sure the image size and the paper size are set correctly; if the image is small, the enlargement
may not be enough to cover the paper.
• Make sure you have stored the paper correctly. Paper can expand or contract if it is not stored
properly. See the instructions that came with your paper for storage instructions.
Parent topic: Solving Page Layout and Content Problems
Incorrect Characters Print
If incorrect characters appear in your prints, try these solutions before reprinting:
• Make sure any cables are securely connected at both ends.
• In Windows, delete all jobs from the Windows Spooler. Click Print Queue on the Maintenance tab in
the printer settings window, and cancel any stalled print jobs.
• If your product is connected to a USB hub, connect it directly to your computer instead.
• If incorrect characters still appear in your prints, try connecting your product using a different cable.
• Make sure you are using the printer software for this product. Check the product name at the top of the
driver window.
Parent topic: Solving Page Layout and Content Problems
Incorrect Image Size or Position
If your printed image is the wrong size or in the wrong position, try these solutions:
• Make sure you selected the correct paper size and layout settings in your printing program and printer
software.
• Make sure you selected the correct paper size on the control panel.
• Make sure your paper is positioned correctly for feeding into the printer.
• Slide the edge guides against the edges of the paper.
• Make sure you selected the correct margins for your paper size in your printing program.
You can use the preview option in your printer software to check your margins before you print.
Parent topic: Solving Page Layout and Content Problems
132
Slanted Printout
If your printouts are slanted, try these solutions:
• Slide the edge guides against the edges of the paper.
• Select a higher print quality setting in your printer software.
• Turn off any high speed settings in your product software.
• Align the print head.
• Make sure the product is not printing while tilted or at an angle.
Parent topic: Solving Page Layout and Content Problems
Solving Print Quality Problems
Check these sections if your printouts have problems with print quality, but your image looks fine on your
computer screen.
Note: When printing using AirPrint, the available print settings are different from those covered in this
manual. See the Apple website for details.
White or Dark Lines in Printout
Blurry or Smeared Printout
Faint Printout or Printout Has Gaps
Grainy Printout
Incorrect Colors
Parent topic: Solving Problems
White or Dark Lines in Printout
If you notice white or dark lines in your prints (also called banding), try these solutions before you reprint:
• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if
necessary.
• Make sure the paper type setting matches the type of paper you loaded.
• Make sure you loaded the printable side of the paper correctly for your product.
• Turn off any high speed settings in your product software.
• You may need to replace the ink cartridges.
133
Parent topic: Solving Print Quality Problems
Blurry or Smeared Printout
If your printouts are blurry or smeared, try these solutions:
• Make sure your paper is not damp, curled, old, or loaded incorrectly in your product.
• Use a support sheet with special paper, or load special paper one sheet at a time.
• Make sure your paper meets the specifications for your product.
• Use Epson papers to ensure proper saturation and absorption of genuine Epson inks.
• Make sure the paper type setting in your product software matches the type of paper you loaded.
• Make sure you loaded the printable side of the paper correctly for your product.
• If you are printing on thick paper or poster board, make sure you select the appropriate settings.
• Avoid handling printouts on glossy paper right after printing to allow the ink to set.
• Dry printouts completely before filing or displaying them. When drying printouts, avoid direct sunlight,
do not use a dryer, and do not touch the printed side of the paper.
• Do not stack printouts immediately after printing.
• If you print on both sides of a sheet of paper, smudges may appear on the reverse side of heavily
saturated or dark images. If one side of a sheet will contain a lighter image or text, print that side first.
Adjust the density and/or ink drying time settings.
• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if
necessary.
• Adjust the print quality in the product software.
• Clean the paper path.
Note: Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface that
extends beyond the base of the product in all directions.
Parent topic: Solving Print Quality Problems
Faint Printout or Printout Has Gaps
If your printouts are faint or have gaps, try these solutions:
• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if
necessary.
134
• The ink cartridges may be old or low on ink, and you may need to replace them.
• Make sure the paper type setting matches the type of paper you loaded.
• Make sure your paper is not damp, curled, old, or loaded incorrectly in your product.
• Adjust the print quality in the product software.
• Clean the paper path.
Parent topic: Solving Print Quality Problems
Grainy Printout
If your printouts are grainy, try these solutions:
• Make sure you loaded the printable side of the paper correctly for your product.
• Select a higher print quality setting and turn off any high speed settings in your product software.
• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if
necessary.
• Adjust the print quality in the product software.
• You may need to increase the image resolution or print a smaller size; see your software
documentation.
Note: Images from the Internet may be low resolution and not result in a high quality printout.
• If you enlarged the image size in an image-editing program, you need to increase the image resolution
setting to retain a high image quality. Increase the image resolution by the same amount you increase
the image size. For example, if the image resolution is 300 dpi (dots per inch) and you will double the
image size for printing, change the resolution setting to 600 dpi.
Note: Higher resolution settings result in larger file sizes, which take longer to process and print.
Consider the limitations of your computer system when selecting a resolution, and select the lowest
possible resolution that produces acceptable quality to keep file sizes manageable.
Parent topic: Solving Print Quality Problems
Incorrect Colors
If your printouts have incorrect colors, try these solutions:
• Make sure the paper type setting matches the paper you loaded.
135
• Make sure the Grayscale setting is not selected in your printer software.
• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if
necessary.
• The ink cartridges may be old or low on ink, and you may need to replace them.
• After you print, the colors in your printout need time to set as the ink dries. During this time, the colors
may look different than you expect. To speed up drying time, do not stack your printouts on top of each
other.
• Your printed colors can never exactly match your on-screen colors. However, you can use a color
management system to get as close as possible. Try using the color management options in your
printer software.
• For best results, use genuine Epson paper.
Parent topic: Solving Print Quality Problems
Uninstall Your Product Software
If you have a problem that requires you to uninstall and re-install your software, follow the instructions for
your operating system.
Uninstalling Printing Software - Windows
Uninstalling Product Software - Mac
Parent topic: Solving Problems
Uninstalling Printing Software - Windows
You can uninstall and then re-install your printer software to solve certain problems.
1. Turn off the product.
2. Disconnect any interface cables.
3. Do one of the following:
•Windows 10: Click and select (Settings) > Apps >Apps & features. Select the program
you want to uninstall and select Uninstall.
•Windows 8.x: Navigate to the Apps screen and select Control Panel >Programs >Programs
and Features. Select the uninstall option for your Epson product, then select Uninstall/Change.
Note: If you see a User Account Control window, click Yes or Continue.
136
In the next window, select your product, if necessary, and click OK. Then follow any on-screen
instructions.
•Windows (other versions): Click or Start, and select All Programs or Programs. Select
Epson, select your product, then click EPSON Printer Software Uninstall.
Note: If you see a User Account Control window, click Yes or Continue.
In the next window, select your product, if necessary, and click OK. Then follow any on-screen
instructions.
4. Restart your computer, then re-install your software.
Note: If you find that re-installing your product software does not solve a problem, contact Epson.
Parent topic: Uninstall Your Product Software
Uninstalling Product Software - Mac
In most cases, you do not need to uninstall your product software before re-installing it. However, you
can download the Uninstaller utility from the Epson support website to uninstall your product software as
described here.
Note: If you find that re-installing your product software does not solve a problem, contact Epson.
1. To download the Uninstaller utility, visit epson.com/support (U.S.), epson.ca/support (Canada), or
epson.com.jm/support (Caribbean) and select your product.
2. Click Downloads.
3. Select your operating system, click Utilities, locate the Uninstaller utility, and click Download.
4. Run the file you downloaded.
5. Double-click the Uninstaller icon.
6. In the Epson Uninstaller screen, select the checkbox for each software program you want to
uninstall.
7. Click Uninstall.
8. Follow the on-screen instructions to uninstall the software.
9. Reinstall your product software.
137
Note: If you uninstall the printer driver and your product name remains in the Print & Fax,Print & Scan,
or Printers & Scanners window, select your product name and click the –(remove) icon to remove it.
Parent topic: Uninstall Your Product Software
Where to Get Help
If you need to contact Epson for technical support services, use the following support options.
Internet Support
Visit Epson's support website at epson.com/support (U.S.), epson.ca/support (Canada), or
epson.com.jm/support (Caribbean) and select your product for solutions to common problems. You can
download drivers and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your
questions.
Speak to a Support Representative
Before you call Epson for support, please have the following information ready:
• Product name
• Product serial number (located on a label on the product)
• Proof of purchase (such as a store receipt) and date of purchase
• Computer configuration
• Description of the problem
Then call:
• U.S.: (562) 276-7272, 6 AM to 8 PM, Pacific Time, Monday through Friday, and 7 AM to 4 PM, Pacific
Time, Saturday
• Canada: (905) 709-3839(905) 709-2567, 6 AM to 8 PM, Pacific Time, Monday through Friday, and 7
AM to 4 PM, Pacific Time, Saturday
Days and hours of support are subject to change without notice. Toll or long distance charges may
apply.
Purchase Supplies and Accessories
You can purchase genuine Epson ink and paper at epson.com (U.S. sales), epson.ca (Canadian sales),
or epson.com.jm (Caribbean sales). You can also purchase supplies from an Epson authorized reseller.
To find the nearest one, call 800-GO-EPSON (800-463-7766) in the U.S. or 800-807-7766 in Canada.
Parent topic: Solving Problems
138
Technical Specifications
These sections list the technical specifications for your product.
Note: Epson offers a recycling program for end of life Epson products. Please go to this site (U.S) or this
site (Canada) for information on how to return your Epson products for proper disposal.
Windows System Requirements
OS X System Requirements
Paper Specifications
Printable Area Specifications
Ink Specifications
Dimension Specifications
Electrical Specifications
Environmental Specifications
Interface Specifications
Network Interface Specifications
Safety and Approvals Specifications
Windows System Requirements
To use your product and its software, your computer should use one of these Microsoft operating
systems:
• Windows 10
• Windows 8.x
• Windows 7
Note: For the latest product software available for your operating system, visit the Epson support site at
epson.com/support (U.S.), epson.ca/support (Canada), or epson.com.jm/support (Caribbean), select
your product, and select Downloads.
Parent topic: Technical Specifications
139
OS X System Requirements
To use your product and its software, your Mac should use one of these operating systems:
• macOS 10.15.x
• macOS 10.14.x
• macOS 10.13.x
• macOS 10.12.x
• OS X 10.11.x
• OS X 10.10.x
• OS X 10.9.x
Note: For the latest product software available for your operating system, visit the Epson support site at
epson.com/support (U.S.), epson.ca/support (Canada), or epson.com.jm/support (Caribbean), select
your product, and select Downloads.
Parent topic: Technical Specifications
Paper Specifications
Note: Since the quality of any particular brand or type of paper may be changed by the manufacturer at
any time, Epson cannot guarantee the quality of any non-Epson brand or type of paper. Always test a
sample of paper stock before purchasing large quantities or printing large jobs.
Roll paper
Core size 2 inches (51 mm) or 3 inches (76.2 mm)
Outer diameter Up to 6.7 inches (170 mm)
Width SureColor P700: 10 to 24 inches (254 to 610 mm)
SureColor P900: 10 to 36 inches (254 to 914 mm)
Thickness 0.003 to 0.011 inch (0.08 to 0.3 mm)
Weight Up to 26.4 lbs (12 kg)
140
Cut sheet paper (1 sheet)
Width SureColor P700: 8.26 to 24 inches (210 to 610 mm)
SureColor P900: 8.26 to 36 inches (210 to 914 mm)
Length 11 to 62.2 inches (279.4 to 1580 mm)
Thickness 0.003 to 0.011 inch (0.08 to 0.3 mm)
Parent topic: Technical Specifications
Printable Area Specifications
Note: When printing borderless, quality may decline in the expanded printable area.
Cut sheets - normal printing
1 Top and side margins: 0.12 inch (3 mm) minimum
2 Top/reduced print quality area: 1.30 inches (33 mm) minimum
3 Bottom/reduced print quality area: 1.41 inches (36 mm) minimum
141
Note: Poster board margins are 0.79 inch (20 mm).
Cut sheets - borderless printing
1 Side/reduced print quality area: 0.12 inch (3 mm) minimum
2 Top/reduced print quality area: 1.42 inches (36 mm) minimum
3 Bottom/reduced print quality area: 1.53 inches (39 mm) minimum
Note: You cannot print borderless on poster board.
142
Roll paper - normal printing
1 Side margins: 0.12 inch (3 mm) minimum
2 Top margin: 1.97 inches (50 mm) minimum
3 Bottom margin: 0.55 inch (14 mm) minimum
143
Roll paper - borderless printing
1 Top margin: 1.97 inches (50 mm) minimum
2 Bottom margin: 0.55 inch (14 mm) minimum
Note: For continuous printing on roll paper, there is no margin between printed images (normal and
borderless printing).
Parent topic: Technical Specifications
Ink Specifications
Note: Epson's warranties do not extend to any damage caused by the use of third-party ink or ink not
designed for your printer.
The included initial ink bottles must be used for printer setup and are not for resale. The printer ships
with full ink bottles and part of the ink from the first bottles is used to charge the print head. Yields vary
considerably based on images printed, print settings, paper type, frequency of use and temperature.
144
Color Photo Black, Matte Black, Gray, Light Gray, Yellow, Cyan, Light
Cyan, Vivid Magenta, Vivid Light Magenta, and Violet
Ink life Do not use if the date on the package has expired
Temperature Storage: –4 to 104 °F (–20 to 40 °C)
1 month at 104 °F (40 °C)
Ink freezes at 32 °F (0 °C)
Ink thaws and is usable after approximately 3 hours at 77 °F (25 °C)
Parent topic: Technical Specifications
Dimension Specifications
SureColor P700
Height Stored: 7.3 inches (185 mm)
Printing: 16.5 inches (420 mm)
Width Stored: 20.3 inches (515 mm)
Printing: 20.3 inches (515 mm)
Depth Stored: 14.5 inches (368 mm)
Printing: 30.3 inches (769 mm)
Weight
(without ink cartridges and power
cord)
Approx. 27.8 lb (12.6 kg)
SureColor P900
Height Stored: 7.8 inches (199 mm)
Printing: 20.5 inches (520 mm)
Width Stored: 24.2 inches (615 mm)
Printing: 24.2 inches (615 mm)
145
Depth Stored: 14.5 inches (368 mm)
Printing: 35.6 inches (905 mm)
Weight
(without ink cartridges and power
cord)
Approx. 32.6 lb (14.8 kg)
Parent topic: Technical Specifications
Electrical Specifications
Power supply rating 100 to 240 V
Rated frequency range 50/60 Hz
Rated current 1.3 to 0.7 A
Power consumption SureColor P700:
• Printing: approximately 22 W
• Ready mode: approximately 8 W
• Sleep mode: approximately 1.1 W
• Power off mode: approximately 0.14 W
SureColor P900:
• Printing: approximately 24 W
• Ready mode: approximately 8 W
• Sleep mode: approximately 1.1 W
• Power off mode: approximately 0.14 W
Parent topic: Technical Specifications
146
Environmental Specifications
Temperature Operating: 50 to 95 °F (10 to 35 °C)
Storage: –4 to 104 °F (–20 to 40 °C)
1 month at 104 °F (40 °C)
Humidity
(non-condensing)
Operating: 20 to 80% RH
Storage: 5 to 85% RH
Parent topic: Technical Specifications
Interface Specifications
Super-Speed USB-Compatible with the Universal Serial Bus Specifications Revision 3.0
Parent topic: Technical Specifications
Network Interface Specifications
Wi-Fi
Standards IEEE802.11b/g/n/ac
Securities WEP (64/128bit)
WPA-PSK (TKIP)
WPA2-PSK (AES) (complies with WPA2 standards with support for
WPA/WPA2 Personal)
Frequency range 2.4 GHz/5 GHz
Communication mode Infrastructure
Wi-Fi Direct (Simple AP) (not supported for IEEE802.11b)
147
Ethernet
Standards IEEE802.3i (10BASE-T)
IEEE802.3u (100BASE-TX)
IEEE802.3ab (1000BASE-T)
IEEE802.3az (Energy Efficient Ethernet); connected device should
comply with IEEE802.3az standards
Note: Use a category 5 or higher shielded twisted pair cable for all interfaces.
Parent topic: Technical Specifications
Safety and Approvals Specifications
United States Safety: UL62368-1
EMC: FCC part 15 Subpart B class B
Canada Safety: CAN/CSA C22.2 No. 62368-1
EMC: CAN ICES-3 (B)/NMB-3 (B)
This equipment contains the following wireless module:
• Manufacturer: SEIKO EPSON CORPORATION
• Type: J26H005
This product conforms to Part 15 of FCC Rules and RSS-210 of the IC Rules. Epson cannot accept
responsibility for any failure to satisfy the protection requirements resulting from a non-recommended
modification of the product. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and
away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed
outdoors is subject to licensing.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102
of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated so that
149
Notices
Check these sections for important notices about your product.
Note: Epson offers a recycling program for end of life Epson products. Please go to this site (U.S) or this
site (Canada) for information on how to return your Epson products for proper disposal.
Important Safety Instructions
Important Privacy Notice (Printer Serial Number)
Binding Arbitration and Class Waiver
FCC Compliance Statement
Trademarks
Copyright Notice
Important Safety Instructions
Before using your Epson product, read and follow these safety instructions.
General Printer Safety Instructions
Ink Cartridge Safety Instructions
LCD Screen Safety Instructions
Wireless Connection Safety Instructions
Parent topic: Notices
General Printer Safety Instructions
• Be sure to follow all warnings and instructions marked on the printer.
• Use only the power cord that comes with the printer. Use of another cord may cause fires or shock. Do
not use the cord with any other equipment.
• Place the printer near a wall outlet where the plug can be easily unplugged.
• Avoid plugging the printer into an outlet on the same circuit as a photo copier or air control system that
regularly switches on and off, or on an outlet controlled by a wall switch or timer.
• Do not let the power cord become damaged or frayed.
• If you use an extension cord with the printer, make sure the total ampere rating of the devices plugged
into the extension cord does not exceed the cord's ampere rating. Also, make sure the total ampere
rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere rating.
150
• Always turn off the printer using the power button, and wait until the power light stops flashing before
unplugging the printer or cutting off power to the electrical outlet.
• Place the printer on a flat, stable surface that extends beyond its base in all directions. It will not
operate properly if it is tilted or at an angle.
• Leave enough space in front of the printer for the paper to be fully ejected.
• Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust.
• Do not place the printer near a radiator or heating vent or in direct sunlight.
• Leave enough room around the printer for sufficient ventilation. Do not block or cover openings in the
case or insert objects through the slots.
• Keep the printer away from potential sources of electromagnetic interference, such as loudspeakers or
the base units of cordless telephones.
• Do not touch the flat white cable inside the printer.
• Do not move the print head by hand; this may damage the printer.
• Do not spill liquid on the printer.
• Do not use aerosol products that contain flammable gases inside or around the printer. Doing so may
cause fire.
• Except as specifically explained in your documentation, do not attempt to service the printer yourself.
• Unplug the printer and refer servicing to qualified service personnel under the following conditions: if
the power cord or plug is damaged; if liquid has entered the product; if the product has been dropped
or the case damaged; if the product does not operate normally or exhibits a distinct change in
performance. Adjust only those controls that are covered by the operating instructions.
• If damage occurs to the plug, replace the cord set or consult a qualified electrician. If there are fuses in
the plug, make sure you replace them with fuses of the correct size and rating.
• Leave the ink cartridges installed. Removing the cartridges can dehydrate the print head and may
prevent the printer from printing.
• When storing or transporting the printer, do not tilt it, stand it on its side, or turn it upside down;
otherwise ink may leak from the cartridges.
Parent topic: Important Safety Instructions
Ink Cartridge Safety Instructions
• Keep ink cartridges out of the reach of children and do not drink the ink.
151
• Be careful when you handle used ink cartridges; there may be ink remaining around the ink supply
port. If ink gets on your skin, wash it off with soap and water. If it gets in your eyes, flush them
immediately with water.
• Do not put your hand inside the product or touch any cartridges during printing.
• Do not turn off the product during ink charging. If ink charging is incomplete, you may not be able to
print.
• Install a new ink cartridge immediately after removing an expended one. Leaving cartridges
uninstalled can dry out the print head and may prevent the product from printing.
• Do not remove or tear the label on the cartridge; this can cause leakage.
• Do not drop or knock ink cartridges against hard objects; this can cause leakage.
• Do not remove the transparent seal from the bottom of the cartridge. This may cause the cartridge to
become unusable.
• Do not disassemble or modify the ink cartridge; you may not be able to print normally.
• Do not break the hooks on the side of the cartridge when removing it from the packaging.
• Do not touch the green IC chip on the side of the cartridge. This may prevent normal operation.
• Do not shake cartridges after opening their packages; this can cause them to leak.
• If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and store it in
the same environment as the product. Note that there is a valve in the ink supply port, making covers
or plugs unnecessary, but care is needed to prevent the ink from staining items that the cartridge
touches. Do not touch the ink cartridge ink supply port or surrounding area.
• Use an ink cartridge before the date printed on its package.
• Do not dismantle an ink cartridge. This could damage the print head.
• Store ink cartridges in a cool, dark place.
• Make sure to install all ink cartridges. The printer only works when all ink cartridges are properly
installed.
Parent topic: Important Safety Instructions
LCD Screen Safety Instructions
• Use only a dry, soft cloth to clean the LCD screen. Do not use liquid or chemical cleansers.
• If the LCD screen is damaged, contact Epson. If the liquid crystal solution gets on your hands, wash
them thoroughly with soap and water. If the liquid crystal solution gets into your eyes, flush them
152
immediately with water. If discomfort or vision problems remain after a thorough flushing, see a doctor
immediately.
• Do not press too hard on the LCD screen or subject it to heavy impacts.
• Do not use a pointy or sharp object, such as a pen or your fingernail, to operate the LCD screen.
• If the LCD screen chips or cracks, do not touch or attempt to remove the broken pieces; contact Epson
for support.
• Do not subject your product to sudden changes in temperature or humidity; this may cause
condensation to develop inside the LCD screen and degrade its performance.
• The LCD screen may contain a few small bright or dark spots, and may display uneven brightness.
These are normal and do not indicate that the screen is damaged in any way.
Parent topic: Important Safety Instructions
Wireless Connection Safety Instructions
Radio waves from this product may adversely affect the operation of medical equipment or automatically
controlled devices, such as pacemakers, automatic doors or fire alarms. When using this product near
such devices or inside a medical facility, follow the directions from authorized staff members at the
facility, and follow all posted warnings and directions on the device to avoid causing an accident.
Parent topic: Important Safety Instructions
Important Privacy Notice (Printer Serial Number)
As part of setup, your product's serial number will be sent to a secure Epson server so that you can be
eligible to participate in programs we may offer from time to time, including the Epson ink replenishment
program. You will have a separate opportunity to consent to participating in such programs.
If you have any questions concerning this process, you can contact us by using the Privacy Feedback
Form, or you can write to:
Epson America, Inc.
Attn: Privacy Coordinator
3840 Kilroy Airport Way
Long Beach, CA 90806-2469
Parent topic: Notices
153
Binding Arbitration and Class Waiver
1. DISPUTES, BINDING INDIVIDUAL ARBITRATION, AND WAIVER OF CLASS ACTIONS AND
CLASS ARBITRATIONS
1.1 Disputes. The terms of this Section 1 shall apply to all Disputes between you and Epson. The term
"Dispute" is meant to have the broadest meaning permissible under law and includes any dispute, claim,
controversy or action between you and Epson arising out of or relating to this Agreement, Epson
branded products (hardware and including any related software), or other transaction involving you and
Epson, whether in contract, warranty, misrepresentation, fraud, tort, intentional tort, statute, regulation,
ordinance, or any other legal or equitable basis. "DISPUTE" DOES NOT INCLUDE IP CLAIMS, or more
specifically, a claim or cause of action for (a) trademark infringement or dilution, (b) patent infringement,
(c) copyright infringement or misuse, or (d) trade secret misappropriation (an "IP Claim"). You and Epson
also agree, notwithstanding Section 1.6,that a court, not an arbitrator, may decide if a claim or cause of
action is for an IP Claim.
1.2 Binding Arbitration. You and Epson agree that all Disputes shall be resolved by binding arbitration
according to this Agreement. ARBITRATION MEANS THAT YOU WAIVE YOUR RIGHT TO A JUDGE
OR JURY IN A COURT PROCEEDING AND YOUR GROUNDS FOR APPEAL ARE LIMITED.
Pursuant to this Agreement, binding arbitration shall be administered by JAMS, a nationally recognized
arbitration authority, pursuant to its code of procedures then in effect for consumer related disputes, but
excluding any rules that permit joinder or class actions in arbitration (for more detail on procedure, see
Section 1.6 below). You and Epson understand and agree that (a) the Federal Arbitration Act (9 U.S.C.
§1, et seq.) governs the interpretation and enforcement of this Section 1, (b) this Agreement
memorializes a transaction in interstate commerce, and (c) this Section 1 shall survive termination of this
Agreement.
1.3 Pre-Arbitration Steps and Notice. Before submitting a claim for arbitration, you and Epson agree to
try, for sixty (60) days, to resolve any Dispute informally. If Epson and you do not reach an agreement to
resolve the Dispute within the sixty (60) days), you or Epson may commence an arbitration. Notice to
Epson must be addressed to: Epson America, Inc., ATTN: Legal Department, 3840 Kilroy Airport Way,
Long Beach, CA 90806 (the "Epson Address"). The Dispute Notice to you will be sent to the most recent
address Epson has in its records for you. For this reason, it is important to notify us if your address
changes by emailing us at EAILegal@ea.epson.com or writing us at the Epson Address above. Notice of
the Dispute shall include the sender's name, address and contact information, the facts giving rise to the
Dispute, and the relief requested (the "Dispute Notice"). Following receipt of the Dispute Notice, Epson
and you agree to act in good faith to resolve the Dispute before commencing arbitration.
1.4 Small Claims Court. Notwithstanding the foregoing, you may bring an individual action in the small
claims court of your state or municipality if the action is within that court's jurisdiction and is pending only
in that court.
154
1.5 WAIVER OF CLASS ACTIONS AND CLASS ARBITRATIONS. YOU AND EPSON AGREE THAT
EACH PARTY MAY BRING DISPUTES AGAINST THE OTHER PARTY ONLY IN AN INDIVIDUAL
CAPACITY, AND NOT AS A PLAINTIFF OR CLASS MEMBER IN ANY CLASS OR
REPRESENTATIVE PROCEEDING, INCLUDING WITHOUT LIMITATION FEDERAL OR STATE
CLASS ACTIONS, OR CLASS ARBITRATIONS. CLASS ACTION LAWSUITS, CLASS-WIDE
ARBITRATIONS, PRIVATE ATTORNEY-GENERAL ACTIONS, AND ANY OTHER PROCEEDING
WHERE SOMEONE ACTS IN A REPRESENTATIVE CAPACITY ARE NOT ALLOWED.
ACCORDINGLY, UNDER THE ARBITRATION PROCEDURES OUTLINED IN THIS SECTION, AN
ARBITRATOR SHALL NOT COMBINE OR CONSOLIDATE MORE THAN ONE PARTY'S CLAIMS
WITHOUT THE WRITTEN CONSENT OF ALL AFFECTED PARTIES TO AN ARBITRATION
PROCEEDING.
1.6 Arbitration Procedure. If you or Epson commences arbitration, the arbitration shall be governed by
the rules of JAMS that are in effect when the arbitration is filed, excluding any rules that permit arbitration
on a class or representative basis (the "JAMS Rules"), available at http://www.jamsadr.com or by calling
1-800-352-5267, and under the rules set forth in this Agreement. All Disputes shall be resolved by a
single neutral arbitrator, and both parties shall have a reasonable opportunity to participate in the
selection of the arbitrator. The arbitrator is bound by the terms of this Agreement. The arbitrator, and not
any federal, state or local court or agency, shall have exclusive authority to resolve all disputes arising
out of or relating to the interpretation, applicability, enforceability or formation of this Agreement,
including any claim that all or any part of this Agreement is void or voidable. Notwithstanding this broad
delegation of authority to the arbitrator, a court may determine the limited question of whether a claim or
cause of action is for an IP Claim, which is excluded from the definition of "Disputes" in Section 1.1
above. The arbitrator shall be empowered to grant whatever relief would be available in a court under
law or in equity. The arbitrator may award you the same damages as a court could, and may award
declaratory or injunctive relief only in favor of the individual party seeking relief and only to the extent
necessary to provide relief warranted by that party's individual claim. In some instances, the costs of
arbitration can exceed the costs of litigation and the right to discovery may be more limited in arbitration
than in court. The arbitrator's award is binding and may be entered as a judgment in any court of
competent jurisdiction.
You may choose to engage in arbitration hearings by telephone. Arbitration hearings not conducted by
telephone shall take place in a location reasonably accessible from your primary residence, or in Orange
County, California, at your option.
a) Initiation of Arbitration Proceeding. If either you or Epson decides to arbitrate a Dispute, both parties
agree to the following procedure:
(i) Write a Demand for Arbitration. The demand must include a description of the Dispute and the amount
of damages sought to be recovered. You can find a copy of a Demand for Arbitration at
http://www.jamsadr.com ("Demand for Arbitration").
(ii) Send three copies of the Demand for Arbitration, plus the appropriate filing fee, to: JAMS, 500 North
State College Blvd., Suite 600 Orange, CA 92868, U.S.A.
155
(iii) Send one copy of the Demand for Arbitration to the other party (same address as the Dispute
Notice), or as otherwise agreed by the parties.
b) Hearing Format. During the arbitration, the amount of any settlement offer made shall not be disclosed
to the arbitrator until after the arbitrator determines the amount, if any, to which you or Epson is entitled.
The discovery or exchange of non-privileged information relevant to the Dispute may be allowed during
the arbitration.
c) Arbitration Fees. Epson shall pay, or (if applicable) reimburse you for, all JAMS filings and arbitrator
fees for any arbitration commenced (by you or Epson) pursuant to provisions of this Agreement.
d) Award in Your Favor. For Disputes in which you or Epson seeks $75,000 or less in damages exclusive
of attorney's fees and costs, if the arbitrator's decision results in an award to you in an amount greater
than Epson's last written offer, if any, to settle the Dispute, Epson will: (i) pay you $1,000 or the amount
of the award, whichever is greater; (ii) pay you twice the amount of your reasonable attorney's fees, if
any; and (iii) reimburse you for any expenses (including expert witness fees and costs) that your attorney
reasonably accrues for investigating, preparing, and pursuing the Dispute in arbitration. Except as
agreed upon by you and Epson in writing, the arbitrator shall determine the amount of fees, costs, and
expenses to be paid by Epson pursuant to this Section 1.6d).
e) Attorney's Fees. Epson will not seek its attorney's fees and expenses for any arbitration commenced
involving a Dispute under this Agreement. Your right to attorney's fees and expenses under Section
1.6d) above does not limit your rights to attorney's fees and expenses under applicable law;
notwithstanding the foregoing, the arbitrator may not award duplicative awards of attorney's fees and
expenses.
1.7 Opt-out. You may elect to opt-out (exclude yourself) from the final, binding, individual
arbitration procedure and waiver of class and representative proceedings specified in this
Agreement by sending a written letter to the Epson Address within thirty (30) days of your assent
to this Agreement (including without limitation the purchase, download, installation of the
Software or other applicable use of Epson Hardware, products and services) that specifies (i)
your name, (ii) your mailing address, and (iii) your request to be excluded from the final, binding
individual arbitration procedure and waiver of class and representative proceedings specified in
this Section 1. In the event that you opt-out consistent with the procedure set forth above, all
other terms shall continue to apply, including the requirement to provide notice prior to litigation.
1.8 Amendments to Section 1. Notwithstanding any provision in this Agreement to the contrary, you
and Epson agree that if Epson makes any future amendments to the dispute resolution procedure and
class action waiver provisions (other than a change to Epson's address) in this Agreement, Epson will
obtain your affirmative assent to the applicable amendment. If you do not affirmatively assent to the
applicable amendment, you are agreeing that you will arbitrate any Dispute between the parties in
accordance with the language of this Section 1 (or resolve disputes as provided for in Section 1.7, if you
timely elected to opt-out when you first assented to this Agreement).
156
1.9 Severability. If any provision in this Section 1 is found to be unenforceable, that provision shall be
severed with the remainder of this Agreement remaining in full force and effect. The foregoing shall not
apply to the prohibition against class or representative actions as provided in Section 1.5. This
means that if Section 1.5 is found to be unenforceable, the entire Section 1 (but only Section 1)
shall be null and void.
Parent topic: Notices
FCC Compliance Statement
For United States Users
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio or television reception. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause interference to radio and television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING
The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC
Certification or Declaration of this device and may cause interference levels which exceed the limits
established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded
equipment interface cable with this device. If this equipment has more than one interface connector, do
not leave cables connected to unused interfaces. Changes or modifications not expressly approved by
the manufacturer could void the user’s authority to operate the equipment.
For Canadian Users
CAN ICES-3(B)/NMB-3(B)
Parent topic: Notices
157
Trademarks
EPSON®is a registered trademark, EPSON Exceed Your Vision is a registered logomark, and Epson
ConnectTM is a trademark of Seiko Epson Corporation.
Epson StoreSM is a service mark of Epson America, Inc.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
Apple, App Store, Mac, macOS, and OS X are trademarks of Apple Inc., registered in the U.S. and other
countries.
Google®is a registered trademark and AndroidTMis a trademark of Google LLC.
Wi-Fi Direct®is a registered trademark of Wi-Fi Alliance®.
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Epson disclaims any and all rights in those marks.
Parent topic: Notices
Copyright Notice
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written permission of Seiko Epson Corporation. The information contained herein is
designed only for use with this Epson product. Epson is not responsible for any use of this information as
applied to other products.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third
parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of:
accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this
product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and
maintenance instructions.
Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any
options or any consumable products other than those designated as Original Epson Products or Epson
Approved Products by Seiko Epson Corporation.
158
Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic
interference that occurs from the use of any interface cables other than those designated as Epson
approved Products by Seiko Epson Corporation.
This information is subject to change without notice.
A Note Concerning Responsible Use of Copyrighted Materials
Default Delay Times for Power Management for Epson Products
Copyright Attribution
Parent topic: Notices
A Note Concerning Responsible Use of Copyrighted Materials
Epson encourages each user to be responsible and respectful of the copyright laws when using any
Epson product. While some countries' laws permit limited copying or reuse of copyrighted material in
certain circumstances, those circumstances may not be as broad as some people assume. Contact your
legal advisor for any questions regarding copyright law.
Parent topic: Copyright Notice
Default Delay Times for Power Management for Epson Products
This product will enter sleep mode after a period of nonuse. This is to ensure that the product meets
Energy Star standards of energy efficiency. More energy savings can be achieved by setting the time to
sleep to a shorter interval.
Parent topic: Copyright Notice
Copyright Attribution
© 2020 Epson America, Inc.
05/20
CPD-58636
Parent topic: Copyright Notice