Table of Contents
- FUJITSU Desktop ESPRIMO G5010 / G9010
- Contents
- Your ESPRIMO
- Important notes
- Device overview
- Getting started
- Connecting external devices
- Switching on for the first time: installing the software
- Operation
- Software installation and restore
- Problem solutions and tips
- System expansions and repairs
- Technical data
- Index
Fujitsu G5010 User Manual
Displayed below is the user manual for G5010 by Fujitsu which is a product in the PCs/Workstations category. This manual has pages.
Related Manuals
System
Operating Manual
FUJITSU Desktop
ESPRIMO G5010 / G9010
Thank you for buying an innovative product from Fujitsu.
Latest information about our products, useful tips, updates etc. is available
on our website: "http://www.fujitsu.com/fts/"
You can find driver updates at: "http://support.ts.fujitsu.com/download"
Should you have any technical questions, please contact:
• our Hotline/Service Desk ("http://support.ts.fujitsu.com/contact/servicedesk")
• Your sales partner
• Your sales office
We hope you enjoy using your new Fujitsu system!
FUJITSU Desktop
ESPRIMO G5010 / G9010
Operating Manual
Your ESPRIMO 5
Important notes 7
Device overview 10
Getting started 13
Connecting external devices 19
Switching on for the first time:
installing the software 21
Operation 23
Software installation and restore 28
Problem solutions and tips 29
System expansions and repairs 32
Technical data 33
Index 35
Remarks
Information on the product description meets the design specifications of Fujitsu and
is provided for comparison purposes. Several factors may cause the actual results to
differ. Technical data is subject to change without prior notification. Fujitsu rejects any
responsibility with regard to technical or editorial mistakes or omissions.
Trademarks
Fujitsu, the Fujitsu logo and ESPRIMO are registered trademarks of Fujitsu Limited
or its subsidiaries in the United States and other countries.
Kensington and Microsaver are registered trademarks of ACCO Brands.
USB Type-C™ and USB-C™ are trademarks of the USB Implementers Forum
in the USA and other countries.
The terms HDMI and HDMI High-Definition Multimedia Interface and the HDMI logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
Microsoft and Windows are trademarks or registered trademarks of Microsoft
Corporation in the USA and/or other countries.
All other trademarks specified here are the property of their respective owners.
Copyright
No part of this publication may be copied, reproduced or translated without
the prior written consent of Fujitsu.
No part of this publication may be saved or transferred by any electronic means
without the written approval of Fujitsu.
Contents
Contents
YourESPRIMO ......................................................................... 5
Validityof the Reference Manual ......................................................... 5
Notational conventions .................................................................. 6
Importantnotes ........................................................................ 7
Safetynotes ............................................................................ 7
Transporting the device .................................................................. 8
Cleaning thedevice ..................................................................... 8
Energy saving, disposaland recycling .................................................... 9
Important notes for operating yourdevice viaUSB PowerDelivery (USB-PD) ............ 9
Deviceoverview ....................................................................... 10
Frontview .............................................................................. 10
Rearview .............................................................................. 11
Gettingstarted ......................................................................... 13
Unpacking and checking thedelivery ..................................................... 13
Steps for initial setup .................................................................... 13
Setting up the device .................................................................... 14
Vertical operatingposition ............................................................ 14
Horizontal operatingposition ......................................................... 16
Connecting the mains adapter ........................................................... 18
Connecting the device tothenetwork(LAN) ............................................... 18
Connectingexternaldevices ........................................................... 19
Portson thedevice ..................................................................... 19
Connecting a monitor . .................................................................. 20
Connecting a USB mouse . . . . ........................................................... 20
Connecting a USB keyboard . . ........................................................... 20
Connecting external devices to the USB ports . ............................................ 20
Devicedrivers ...................................................................... 20
Connecting Audio Devices . . . . ........................................................... 20
Switchingonforthefirsttime:installingthesoftware .................................. 21
Switch on themonitor andthe machine ................................................... 22
Installingthesoftware ................................................................... 22
Operation .............................................................................. 23
Switchthe deviceon .................................................................... 23
Switching offthedevice ................................................................. 23
Procedure in an emergency . . . ....................................................... 23
Settingsin theBIOS setup ........................................................... 23
Property and data protection . . ........................................................... 24
SecurityLock device ................................................................ 24
Securing USB covers (optional) . . . ................................................... 25
BIOSsetup securityfunctions ........................................................ 26
Deletedata ......................................................................... 27
Softwareinstallationandrestore ....................................................... 28
Installingnewsoftware .................................................................. 28
Downloadcurrentdrivers/software ........................................................ 28
Problemsolutionsandtips ............................................................ 29
Fujitsu 3
Contents
Helpif problemsoccur ................................................................... 29
Troubleshooting . . ....................................................................... 29
Power-on indicatorremains unlitafteryouhave switchedon yourdevice ................. 29
The device cannot be switched off with the On/Off switch. .............................. 30
Monitorremainsblank ............................................................... 30
Nomousepointerdisplayedon thescreen ............................................ 31
Time and/or date is not correct . . . . . . ................................................. 31
Errormessageson thescreen ........................................................ 31
Tips .................................................................................... 31
Systemexpansionsandrepairs ........................................................ 32
Technicaldata ........................................................................ 33
FUJITSU Desktop ESPRIMO G5010 / G9010 ............................................. 33
ACadapter ............................................................................. 34
Index .................................................................................. 35
4Fujitsu
Your ESPRIMO
Your ESPRIMO
Summary
... is available with various configuration levels, which differ in terms of hardware and software
equipment. You can install additional drives (for example a DVD drive) and other boards.
This manual tells you how to start using your device and how to operate it in daily use.
This manual applies for all configuration levels. Depending on the configuration level
chosen some of the hardware components described may not be available on your
device. Please observe the notes on your Operating System.
Depending on the configuration selected, the operating system is pre-installed
on your hard disk (e.g. Windows).
Detailed information on this device is also provided:
• in the "Quick Start Guide" poster
• in the "Safety/regulations" manual
• in the "Warranty" manual
• in the BIOS manual for your device
• in the manual for "System expansions and repairs"
• in the operating manual for the monitor
• in the manual for the motherboard
• in your Operating System documentation
ValidityoftheReferenceManual
This description applies to the following systems (possibly with the following suffixes):
• FUJITSU Desktop ESPRIMO G5010
• FUJITSU Desktop ESPRIMO G9010
Fujitsu 5
Your ESPRIMO
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
these warnings could pose a risk to health, damage the device or lead
to loss of data. The warranty will be invalidated if the device becomes
defective through failure to observe these warnings.
Indicates important information for the proper use of the device.
►Indicates an activity that must be performed
Indicates a result
This font indicates data entered using the keyboard in a program dialogue or at
the command line, e.g. your password (Name123) or a command used to
start a program (start.exe)
This font indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This font indicates
• terms and texts used in a software interface, e.g.: Click on Save
• names of programs or files, e.g. Windows or setup.exe.
"This font" indicates
• cross-references to another section, e.g. "Safety information"
• cross-references to an external source, e.g. a web address: For more
information, go to "http://www.fujitsu.com/fts"
• Names of CDs, DVDs and titles or designations for other materials,
e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual
Key indicates a key on the keyboard, e.g: F10
This font indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the device
6Fujitsu
Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.
Safety notes
SafetynotesNote
Please follow the safety notes provided in the "Safety/Regulations" manual
as well as the safety notes given below.
When installing and operating the device, observe the instructions for environmental
conditions in the chapter "Technical data ", Page 33 and the chapter "Getting
started", Page 13 or the instructions in the data sheets.
To ensure that the housing is adequately ventilated, please observe the clearances
around the device when installing it. In order to avoid overheating, the ventilation
surfaces of the screen and the device must not be covered.
You may only operate the device if the nominal voltage of the device
corresponds to the local mains voltage.
To completely disconnect the unit from the power supply, unplug the
power cord from the wall outlet.
Please note that components in the system and the surface of the
device can reachhightemperatures.
The activities described in these instructions must always be
performed with the greatest care.
For system expansions and repairs to the unit, refer to the manual “System
Expansions and Repairs”. Some of the activities described in this manual may only
be performed by authorized personnel. Improper repairs may cause danger to the
user (electric shock, fire hazard) or material damage to the unit.
Operate the device only with the casing closed.
Do not put or place any objects on the top of the unit.
Do not apply pressure to the top of the unit during operation.
Fujitsu 7
Important notes
Power cable and mains adapter:
The supplied power cable conforms to the requirements of the country in
which you purchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
The mains adapter’s power cable should only be connected to a mains
socket if the device is connected.
Do not use the mains adapter for other devices.
Only use the power adapter provided for the device, see chapter
"Technical data ", Page 33.
Optionally, you can operate the system without a line adapter using a Fujitsu monitor with
the Power Delivery function (e.g. P24-9 TE or P27-9 TS) and a USB-C cable, see chapter
"Important notes for operating your device via USB Power Delivery (USB-PD)", Page 9.
Make sure that the rated current of the mains adapter is not higher than that of
the power system to which you connect the mains adapter.
ON/OFF switches do not disconnect the device from the mains voltage. To completely
disconnect the mains voltage, remove the power plug from the power socket.
Transporting the device
DeviceTranspo rtationRe-transportation
Transport all devices separately in their original packaging or in a packaging
that protects them from knocks and jolts.
Unpack them only at the installation site.
Ifthedeviceisbrought from a cold environment into the room where it will be used,
condensation may occur. In order to avoid damage to the device, wait before preparing
it for use until the device has reached the ambient temperature and it is absolutely dry.
Cleaning the device
Device,Transpo rtationRetransportationSystemunit, see Devi ce
Turn off all power and equipment switches and disconnect the power
plug from the mains outlet.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic (alcohol, thinner or acetone).
Never clean the device with water! Water entering into the device could
present a serious risk to users (e.g. electric shock).
Ensure that no liquid enters the system.
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been
moistened in mild domestic detergent and then carefully wrung out.
Use disinfectant wipes to clean the keyboard and the mouse.
8Fujitsu
Important notes
Energy saving, disposal and recycling
DisposalEnergysavingR ecycling
Information on these subjects can be found in the manual "Environmental and Energy Information"
or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/").
Important notes for operating your device via USB
Power Delivery (USB-PD)
Your device supports USB-PD, a function defined by the USB Implementers Forum
(USB-IF) (current specification): USB-PD version 2.0).
You can use USB-PD to power the device via a USB-C cable. The Fujitsu P24-9
TE monitor, for example, acts as a power adapter for this purpose. No further
connection cables to the system are required.
Make sure that you always use the USB-C to USB-C cable included with the screen when operating
via USB-PD. Otherwise, security problems may occur. To ensure safety and compatibility, use
only the supplied USB-C cable or an equivalent certified USB-C cable. In an extreme situation
(CPU fully loaded and many external USB devices with high power consumption simultaneously
connected to your ESPRIMO), the internal CPU frequency can be lowered to avoid power overload.
Mouse, keyboard, headphones and similar devices have low power consumption and do not cause
overload. Once the overload is over, the CPU frequency returns to its normal value. In order to
avoid a performance limitation, the device causing the overload must be stopped, or the number of
USB devices with high power consumption connected to the ESPRIMO must be reduced.
Fujitsu 9
Device overview
Device overview
Ports
This chapter presents the individual hardware components of your device. This will provide
you with an overview of the operating controls of the device. Please familiarise yourself
with these components before you start to work with the device.
Front view
OnswitchOffswitchPower-onindicatorHeadphoneportMicrophoneportUSB
3
4
2
1
1 = On/off switch with operation indicator
2 = USB port (USB 3.1, type C)
3 = USB port (USB 3.1, type A)
4 = Combined Headphone and
Microphone Port
10 Fujitsu
Device overview
Rear view
LANsocketMonitorportUSBportsDCinputconnectorPCIslotPCIeslotSecurityLock
FUJITSU ESPRIMO G5010
3
4
5
2
1
8
7
6
1 = DC Socket (DC IN)
2 = DisplayPort
3 = HDMI port
4=USBport(USB3.1,typeC)
5 = RJ45 LAN socket (Local Area Network)
6 = USB ports (USB 2.0, type A)
7 = USB ports (USB 3.1, type A)
8 = Security Lock device
Fujitsu 11
Device overview
FUJITSU ESPRIMO G9010
3
4
2
1
6
5
1 = DC input jack (DC IN)
2 = Displayports
3 = USB port (USB 3.1, type C)
4 = RJ45 socket (Local Area Network)
5 = USB ports (USB 3.1, type A)
6 = Security Lock Device
12 Fujitsu
Getting started
Getting started
Gettingstarted
Please observe the safety information in the "Important notes", Page 7 chapter.
Unpacking and checking the delivery
It is recommended not to throw away the original packaging material! It may be
required for reshipment at some later date.
PackagingContents ofdeliveryPackaging,
►Unpack all the individual parts.
►Check the contents of the package for any visible damage caused during transport.
►Check whether the delivery conforms to the details in the delivery note.
►Should you discover that the delivery does not correspond to the delivery
note, notify your local sales outlet immediately.
Steps for initial setup
Preparingforfirs tuse,ove rviewPreparingforu se,
Only a few steps are necessary to put your new device into operation for the first time:
• Select a location for device and set up device
• Connect external devices such as mouse, keyboard and monitor
• Check the voltage at the mains outlet and connect the device to an electrical outlet
• Switch the device on
You will learn more about the individual steps in the following sections.
External devices
If you have received other external devices in addition to your own device (e.g.
a printer), do not connect these until after the initial installation. The following
sections describe how to connect these external devices.
Drives and boards
If you have received drives or boards as well as your device, please do not
install them until after first-time setup. Installation of drives and boards is
described in the "System expansions and repairs" manual.
Fujitsu 13
Getting started
Setting up the device
VideoworkstationErgonomicDevice,
When setting up your device, please read the recommendations and
safety notes in the "Safety/regulations" manual.
We recommend that you place your device on a surface with good anti-slip qualities.
In view of the multitude of different finishes and varnishes used on furniture, it is
possible that the rubber feet will mark the surface they stand on.
Depending on your device location, disturbing vibrations and noises may occur. In
order to avoid this, a minimum distance of 10 mm / 0.39 inch to other devices or
objects should be maintained on housing sides without ventilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
on the monitor or the device.
For ventilation surfaces, a minimum distance of 200 mm / 7.87 inch
from the device must be maintained.
Do not place several devices on top of each other or a monitor on top of the device.
Do not expose the device to extreme ambient conditions (see "Technical data ",
Page 33, "Ambient conditions"). Protect the device against dust, humidity and heat.
You can use the device in a vertical or horizontal operating position.
Vertical operating position
Vertica lo perating position
Operatingposition,vertical
BasefeetSidecover
If you want to operate the unit in a vertical position, use the foot supplied with the unit.
Attach the foot only to the side of the device shown in the figures.
If connecting many cables to the device, ensure that the device is in a stable
position, in order to prevent it from toppling over.
Proceed as follows to prepare the device for the vertical operating position:
►Disconnect the cables if required.
►Lay the device on its top (narrow side) as shown, on a stable, flat and clean surface.
14 Fujitsu
Getting started
2
21
►Place the foot on the housing (1). Make sure that you align the screw holes on
the foot with the corresponding holes on the housing.
►Fix the foot with the screws (2).
Fujitsu 15
Getting started
►Place the unit on the foot.
►If necessary, reconnect any cables that were previously disconnected.
Horizontal operating position
If you want to operate the device in a horizontal operating position, use the four
supplied adhesive feet for the horizontal operating position.
Attach adhesive feet only to the side of the device shown in the figures.
Proceed as follows to prepare the device for the horizontal operating position:
HorizontaloperatingpositionOperatingposition, horizontalBasefeet
►Disconnect the cables if required.
►Lay the device on its right side as shown, on a stable, flat and clean surface.
16 Fujitsu
Getting started
►Stick the adhesive feet as shown on the side of the device.
►Place the device on the adhesive feet.
►If necessary, reconnect any cables that were previously disconnected.
Fujitsu 17
Getting started
Connecting the mains adapter
Preparingforo perationPowercable
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The supplied power cable conforms to the requirements of the country in
which you purchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
Example: ESPRIMO G9010
2
1
3
►Connect the mains cable (1) to the
mains adapter.
►Connect the mains adapter cable (2) to
the DC jack (DC IN) of the device.
►Plug the mains cable (3) into a mains socket.
Optionally, you can operate the system via the USB-C cable, e.g. in
combination with the Fujitsu P24-9 TE monitor.
Connecting the device to the network (LAN)
LAN
►Connect the 10/100/1000 Base T network cable to the RJ45 LAN port.
18 Fujitsu
Connecting external devices
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always hold the plug of a cable when removing it. Never unplug a
cable by pulling the cable itself.
To ensure that your device works properly, use only the connection cable
supplied or use a high-quality connection cable.
Ports on the device
PortsExternaldevicesDevi ce
The ports are located on the front and rear side of the device. The ports available on
your device depend on the configuration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the mainboard.
Combined headphone
and microphone port,
black (front panel)
Headphones
RJ45-LAN port
LANport
DP Display port
Displayport
HDMI port
USB 2.0 - Universal
Serial Bus, type A,
black
UniversalSerialBus
USB 3.1 Gen2 -
Universal Serial Bus,
type A: blue, type C:
black
USB 3.1 Gen1 -
Universal Serial Bus,
type A: blue, type C:
black
UniversalSerialBus
+USB 3.1 Gen 1 type C
with charging function:
black
+USB3.1Gen1typeC
with charging function:
black
Some of the connected devices require special software (e.g. drivers) (refer to the
documentation for the connected device and operating system).
Fujitsu 19
Connecting external devices
Connecting a monitor
Only attach the screen to your device when it is switched off.
►Follow the instructions contained in the monitor manual to prepare the monitor
for operation (e.g. connecting cables).
Monitor,
►Connect the data cable to the required monitor port on your device.
►Plug the monitor power cable into the grounded mains outlet.
Connecting a USB mouse
►Connect the USB mouse to one of the USB ports on the device.
Connectinga USB mouse
USBport
Connecting a USB keyboard
Use only the keyboard cable supplied.
USBportConnecting
►Plug the rectangular connector of the keyboard cable into the rectangular socket
on the underside or on the rear of the keyboard.
►Plug the flat rectangular USB connector of the keyboard cable into a USB port of the device.
USBport
Connecting external devices to the USB ports
USBdevices,USBport,Externaldevices,Devices,
You can connect a wide range of external devices to the USB ports (e.g.
printer, scanner, mouse or keyboard).
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in the documentation for the USB devices.
►Connect the data cable to the external device.
►Connect the data cable to one of the USB ports on your device.
Device drivers
External USB devices which you connect to one of the USB ports don’t usually
need their own drivers because the software required is already included in
the operating system. If the device requires separate software, please follow
the instructions in the manufacturer’s documentation.
Connecting Audio Devices
MicrophoneHeadphonesLine-outdevices
►Connect the audio device to the combined headphone and microphone port.
20 Fujitsu
Switching on for the first time: installing the software
Switchingonforthefirst time:
installing the software
Installing,Software,Installing,
Once the installation has been started the device must not be switched
off, unless the installation has been completed.
During installation, the device may only be rebooted when you are requested to do so!
The installation will otherwise not be carried out correctly and the contents
of the hard disk must be completely restored.
If the device is integrated into a network, the user and server details as well as
the network protocol are required during the software installation.
Contact your network administrator if you have any questions about these settings.
When you switch on the device for the first time, the supplied software
is installed and configured. Plan a reasonable amount of time for this,
as this process must not be interrupted.
Fujitsu 21
Switching on for the first time: installing the software
Switch on the monitor and the machine
In order to avoid overheating, do not cover the ventilation areas
on the monitor or the device.
►Switch on the monitor (see operating instructions for the monitor).
►Press the on/off button on the front of the machine.
The operational display will light up and the machine will start.
Installing the software
►During installation, follow the on-screen instructions.
Software,
Installing,
►If anything is unclear regarding the data you are asked to input, read the
online Help in your operating system.
You will find more information on the system, as well as drivers, utilities
and updates on the optional "Drivers & Utilities" DVD and on the
Internet at "http://www.fujitsu.com/fts/support".
You can find information and help on the Windows operating system functions
on the Internet at "http://windows.microsoft.com".
22 Fujitsu
Operation
Operation
Switch the device on
►If necessary, switch the monitor on (see the operating manual for the monitor).
Device,Monitor,
►Press the ON/OFF switch on the front of the device.
The power indicator lights up and the device starts.
Switching off the device
►Shut down the operating system in the proper way. In Windows: from the
Start menu select the Shut Down option.
Device,Monitor,
►If the operating system does not automatically switch the device into energy-saving mode or
switch it off, press the ON/OFF switch. Warning, this could lead to a loss of data!
Ifthedeviceisswi
tched off, it consumes a minimum of energy.
The ON/OFF switch does not disconnect the device from the mains voltage. To
completely disconnect the mains voltage, remove the power plug from the power socket.
►If necessary, switch the monitor off (see the operating manual for the monitor).
Procedure in an emergency
If the device cannot be switched off, you can force a shutdown by
using the following emergency procedure.
Warning, this could lead to a loss of your data!
►Press the ON/OFF switch for at least 4 seconds.
The device switches itself off.
The next time you restart the device, error messages may occur due to improper switching off.
Settings in the BIOS setup
In the BIOS setup, you can set system functions and the hardware configuration of the
device. At delivery, the default entries are effective (see BIOS manual or mainboard
manual). You can customize these settings in the BIOS setup.
Fujitsu 23
Operation
Property and data protection
Propertyprotectio nData protectionProtection,proper tyand dat a
Software functions and mechanical locking offer a broad range of functions for protecting your
device and your personal data from unauthorised access. You can also combine these functions.
Security Lock device
Using the Security Lock device and the Kensington Lock cable (steel cable, accessory) you can
protect your device against theft. Please consult the manual for your Security Lock.
Your device has a security lock device located at the rear top (in vertical operating position).
When using the VESA sub-adapter, first connect the Kensington Lock Cable to the security
lock device and then mount your device to the VESA sub-adapter. Refer to the manual that
came with your VESA Mounting Kit ESPRIMO G for more information.
When using the Security Lock device, opening of the casing is also prevented.
24 Fujitsu
Operation
Securing USB covers (optional)
To prevent use of the USB ports, you can attach optional USB covers to the USB
ports on the front and rear side of the device.
Please note that USB covers, once fitted, cannot be removed again!
Be sure to insert the USB covers the right way round.
►Insert the USB cover into type A USB port on the front, and press the USB cover into place.
Fujitsu 25
Operation
Example: ESPRIMO G9010
►Insert the USB covers into type A USB ports on the back of the device
and push the USB covers in to place.
In the BIOS Setup, under Advanced - USB Port Security, you can also deactivate
the USB ports, in order to limit the use of USB devices.
BIOS setup security functions
SecurityfunctionsBIOSSetup
The Security menu in BIOS Setup offers you various options for protecting your
personal data against unauthorized access, e.g.:
• Prevent unauthorized access to BIOS Setup
• Prevent unauthorised system access
• Prevent unauthorised access to the settings of boards with their own BIOS
• Activate virus warnings
• Protect BIOS from overwriting
• Protect the device from being switched on by an external device
You can also combine these functions.
A detailed description of the Security menu and how to assign passwords can be found
in the manual for the mainboard or in the BIOS manual.
26 Fujitsu
Operation
Delete data
data
Erase Disk function for hard disks and solid state drives
EraseDiskDeleteSATAharddisk
Erase Disk is a solution integrated in the firmware of FUJITSU desktops (UEFI:Unified Extensible
Firmware Interface) to delete all data from a hard disk or Solid State Disc drives (SSDs).
With this function, all data from internal disks or SSDs can be irretrievably deleted before the
hard disks or the whole system are disposed of. The function can also be used if hard disks
are to be completely deleted, e.g. before installing a new operating system.
Further information on Erase Disk can be found on the Internet at
"http://support.ts.fujitsu.com/download".
Fujitsu 27
Software installation and restore
Software installation and restore
Installing new software
When installing programs or drivers, important files may be overwritten and modified. To
be able to access the original data in the event of any problems following installation,
you should backup your hard disk prior to installation.
Download current drivers/software
►Switch the device on.
►In the browser, select the address "http://www.fujitsu.com/fts/support".
►Select the desired product group, e.g. Client Computing Devices.
►In the Downloads area, select the entry More Details.
►Select your device via one of the available search options:
Automatic Product Detection
or
►Serial number
or
►Product Search
or
►Browse For Product
Alistofthea
vailable drivers, software, etc. is displayed.
►To see the valid versions and available options for your operating system, select
the operating system desired under Selected operating system.
►Click on the desired drivers, desired software, etc.
►To start the download, click on Direct download after the desired option.
►Follow the instructions on the screen.
28 Fujitsu
Problem solutions and tips
Problem solutions and tips
Refer to the safety notes in the "Safety/regulations" manual and in the "Getting
started", Page 13 chapter when connecting or disconnecting cables.
If a fault occurs, try to rectify it in accordance with the measures described in the following documents:
• in this chapter
• in the documentation relating to the peripheral devices
• in the Help sections for the individual programs
• in the documentation for the operating system in use.
Help if problems occur
Should you encounter a problem with your computer that you cannot resolve yourself:
►Note the ID number of your device. The ID number is found on the type rating
plate on the back, the underside or the top of the casing.
►Contact the Service Desk responsible for your country for clarification of the problem:
"http://support.ts.fujitsu.com/contact/servicedesk". When you do this, please have
ready the ID number and serial number of your system.
Troubleshooting
Power-on indicator remains unlit after you have
switched on your device
Cause Troubleshooting
The mains voltage supply is faulty. ►Check whether the power cable is plugged
properly into the device and a grounded
mains outlet.
Internal power supply overloaded. ►Pull the power plug of the device out of the
mains outlet.
►Wait approx. 3 min.
►Plug the power plug into a properly grounded
mains outlet again.
►Switch the device on.
Fujitsu 29
Problem solutions and tips
The device cannot be switched off with the On/Off switch.
Cause Troubleshooting
System crash ►Press the On/Off switch for at least
4 seconds, until the device switches off.
Attention: Warning, this could lead to a loss of
data!
The Operating System is not shut-down properly
in the process. Error messages are therefore
possible the next time the system is booted.
Monitor remains blank
Cause Remedy
Monitor is switched off ►Switch your monitor on.
Power saving has been activated (screen is
blank)
►Press any key on the keyboard.
or
►Deactivate the screen saver. If
necessary, enter the appropriate
password.
Brightness control is set to dark ►Adjust the brightness control. For detailed
information, please refer to the operating
manual supplied with your monitor.
Power cable not connected ►Switch off the monitor and the device.
►Check that the monitor power cable is
properly connected to the monitor and to
a grounded mains outlet or to the monitor
socket of the device.
►Check that the device power cable is
properly plugged into the device and a
grounded mains outlet.
►Switch on the monitor and the device.
Monitor cable not connected ►Switch off the monitor and the device.
►Check that the monitor cable is properly
connected to the device and monitor.
►Switch on the monitor and the device.
Incorrect setting for the monitor ►Restart the system.
►Press F8while the system is booting.
►Start the system in Safe Mode.
►Set up the monitor as described in the
documentation for your operating system
and monitor.
30 Fujitsu
Problem solutions and tips
No mouse pointer displayed on the screen
Cause Remedy
The mouse is not correctly connected. ►Shut down your operating system in the
proper manner, for instance using Ctrl +
Alt +Del .
►Switch the device off.
►Check that the mouse cable is properly
connected to the system unit. If you use an
adapter or extension lead with the mouse
cable, check the connections.
►Make sure that only one mouse is
connected.
►Switch the device on.
Disabled USB ports ►Check in the BIOS Setup whether the used
USB ports are enabled (see BIOS manual or
manual for the mainboard).
Time and/or date is not correct
Cause Remedy
Time and date are incorrect. ►Set the correct time and date within the
operating system you are using.
or
►Set the correct time and/or date in the
BIOS Setup.
The lithium battery is empty. ►If the time and date are repeatedly wrong
when you switch your device off and then
on, change the lithium battery (see the
"System expansions and repairs" manual).
Error messages on the screen
Error messages and their explanations are provided:
• in the technical manual for the mainboard
• in the documentation for the programs used
Tips
Topic Tip
Outofsystemresources ►Close unnecessary applications.
or
►Run the applications in a different order.
Fujitsu 31
System expansions and repairs
System expansions and repairs
Upgrades,Device ,System expansionCompon entsServicing
Information on system expansions and repairs can be found on the Internet in the
"System Expansions and Repairs" manual at "http://www.fujitsu.com/fts/support".
Operations that are distinguished in the manual as Only For Service, such
as repairs to the device, may only however be performed by authorised
service technicians. Incorrect repairs may greatly endanger the user (electric
shock, fire risk) and will invalidate your warranty.
32 Fujitsu
Technical data
Technical data
Technicaldata
FUJITSU Desktop ESPRIMO G5010 / G9010
Electrical data
Protection class: II
Nominal voltage: 19 V
Max. rated current: 3,42 A
Dimensions (vertical operating position)
Width/depth/height
(with foot):
68 mm x 165 mm x 156 mm / 2.67 inch x 6.48 inch x 6.13 inch
Width/depth/height
(without foot):
36 mm x 165 mm x 147 mm / 1.42 inch x 6.48 inch x 5.79 inch
Dimensions (horizontal operating position)
Width/depth/height
(with adhesive feet):
147 mm x 165 mm x 39 mm / 5.79 inch x 6.48 inch x 1.52 inch
Width/depth/height
(without adhesive feet):
147 mm x 165 mm x 36 mm / 5.79 inch x 6.48 inch x 1.42 inch
Weight
in basic configuration: approx. 0.77 kg / 1.70 Ibs
Environmental conditions
Climate class 3K2 DIN EN 6072133
Climate class 2K2 DIN EN 6072132
Temperature
Operation (3K2) 15 °C .... 35 °C / 59 °F ... 95 °F
Transportation (2K2) –25 °C .... 60 °C / –13 °F ... 140 °F
Condensation is not permitted during operation.
Clearance required to ensure adequate ventilation:
without ventilation
openings
min. 10 mm / 0.39 inch
with ventilation
openings
min. 200 mm / 7.87 inch (in the corresponding vertical or horizontal
operating position, "Setting up the device", Page 14)
Maximum permissible
operating height
3000 m (9842 ft), for China only 2000 m (6557 ft)
The data sheets for these devices provide further technical data. The data sheets
can be found on the Internet at "http://www.fujitsu.com/fts/"
Fujitsu 33
Technical data
AC adapter
Electrical data
Rated voltage: 100 – 240 V
Max. rated current: 1,8 A
Rated frequency: 50–60Hz
Only the following adapters with Limited Power Source may be used:
• 65 W: S26113-E631-V75 model: A20-065N2A
34 Fujitsu
Index
Index
B
Base feet 14, 16
BIOS Setup
security functions 26
C
Components
installing/removing 32
Connecting
USB keyboard 20
Connecting a USB mouse 20
Contents of delivery 13
D
data
delete 27
Data protection 24
DC input connector
DC IN 11
Delete SATA hard disk 27
Device
Ports 19
transporting 8
Device,
setting up 14
switching off 23
switching on 23
transporting 8
upgrades 32
Devices,
connecting 20
Display port 19
Disposal 9
E
Energy saving 9
Erase Disk 27
Ergonomic
video workstation 14
External devices
Ports 19
External devices,
connecting 20
G
Getting started 13
H
Headphone port 10
Headphones 19
connecting 20
Horizontal operating position 16
I
Important notes 7
Installing,
software 21–22
switching on for the first time 21
L
LAN 18
LAN port 19
LAN socket 11
Line-out devices
connecting 20
M
Microphone
connecting 20
Microphone port 10
Monitor port 11
Monitor,
Connecting 20
switching off 23
switching on 23
N
Note
safety 7
Notes
important 7
O
Off switch 10
On switch 10
Operating position, horizontal 16
Operating position, vertical 14
P
Packaging 13
Packaging,
unpacking 13
PCI slot 11
PCIe slot 11
Ports 10, 19
Fujitsu 35
Index
Power cable
connection 18
Power-on indicator 10
Preparing for first use, overview 13
Preparing for operation 18
Preparing for use,
overview 13
Property protection 24
Protection, property and data 24
R
Re-transportation 8
Recycling 9
Retransportation 8
S
Safety notes 7
Security functions
BIOS Setup 26
Security Lock
Security Lock device 11
Servicing 32
Side cover 14
Software,
installing 21–22
Summary
Device 5
System expansion 32
System unit, see Device 8
T
Technical data 33
Transportation 8
U
Universal Serial Bus 19
Upgrades,
device 32
USB
ports 10
USB devices,
connecting 20
USB port 20
connecting keyboard 20
USB port,
connecting devices 20
USB ports 11
V
Vertical operating position 14
Video workstation 14
36 Fujitsu