Table of Contents
- FUJITSU Desktop ESPRIMO P5xx / P7xx / P9xx
- Contents
- Your ESPRIMO
- Ports and Operating Elements
- Important notes
- Getting started
- Unpacking and checking the delivery
- Steps for initial setup
- Setting up the device
- Connecting the machine to the mains
- Connecting external devices
- Switching on for the first time: installing the software
- Operation
- Troubleshooting and tips
- System expansions
- Information about boards
- Opening the casing
- Closing the casing
- Overview of the drive bays and drives in your device
- Install and remove the slim-line drive
- Installing and removing the accessible 51/4 inch drive
- Insertion and removal of a SmartCard reader (optional, 3½-inch)
- Installing and removing memory card reader (MultiCard) or 3½-inch hard disk drive (ESPRIMO P55x only) (optional, 3½-inch)
- Installing and removing 2½-inch / SSD hard disk drive (ESPRIMO P55x only)
- Installing and removing the hard disk drive in the lower part of the device
- Removing and fitting the front fan
- Installing and removing an M.2 module
- Installing and removing a board
- Installing and removing external WLAN antennas
- Installing and removing heat sinks
- Mainboard expansions
- Technical data
- Index
Fujitsu P758 User Manual
Displayed below is the user manual for P758 by Fujitsu which is a product in the PCs/Workstations category. This manual has pages.
Related Manuals
System
Operating Manual
FUJITSU Desktop
ESPRIMO P5xx / P7xx / P9xx
Thank you for buying an innovative product from Fujitsu.
Latest information about our products, useful tips, updates etc. is available
on our website: "http://www.fujitsu.com/fts/"
You can find driver updates at: "http://support.ts.fujitsu.com/download"
Should you have any technical questions, please contact:
• our Hotline/Service Desk ("http://support.ts.fujitsu.com/contact/servicedesk")
• Your sales partner
• Your sales office
We hope you enjoy using your new Fujitsu system!
Remarks
Information on the product description meets the design specifications of Fujitsu and
is provided for comparison purposes. Several factors may cause the actual results to
differ. Technical data is subject to change without prior notification. Fujitsu rejects any
responsibility with regard to technical or editorial mistakes or omissions.
Trademarks
Fujitsu, the Fujitsu logo and ESPRIMO are registered trademarks of Fujitsu Limited
or its subsidiaries in the USA and other countries.
Kensington, MicroSaver and K-Slot are registered trademarks of ACCO Brands.
USB Type-C™ and USB-C™ are trademarks of the USB Implementers Forum
in the USA and other countries.
Microsoft and Windows are trademarks or registered trademarks of Microsoft
Corporation in the USA and/or other countries.
All other trademarks specified here are the property of their respective owners.
Copyright
No part of this publication may be copied, reproduced or translated without
the prior written consent of Fujitsu.
No part of this publication may be saved or transferred by any electronic means
without the written approval of Fujitsu.
Contents
Contents
YourESPRIMO ......................................................................... 7
Validityof the Reference Manual ......................................................... 7
Notational conventions .................................................................. 8
Ports and Operating Elements ......................................................... 9
Front ................................................................................... 9
Rear ................................................................................... 10
Important notes ........................................................................ 11
Safetyinformation ....................................................................... 11
Transportingthedevice .................................................................. 11
Cleaning thedevice ..................................................................... 12
Energy-saving,disposal andrecycling .................................................... 12
Getting started ......................................................................... 13
Unpacking and checking thedelivery ..................................................... 13
Steps for initial setup .................................................................... 13
Setting up the device .................................................................... 14
Connecting the machine tothemains ..................................................... 14
Connecting externaldevices ............................................................. 15
Ports on the device .................................................................. 16
Connecting a monitor ................................................................ 17
Connecting the mouse ............................................................... 18
Connecting the keyboard . ........................................................... 18
Connecting externaldevicestothe parallelor serialinterface (optional) .................. 19
Connecting externaldevicestothe USBports ......................................... 19
Switching on for the firsttime:installingthesoftware ....................................... 20
Switch on the monitorand themachine ............................................... 20
Installing thesoftware ............................................................... 21
Operation .............................................................................. 22
Switchthe deviceon .................................................................... 22
Switching offthedevice ................................................................. 22
Indicatorsonthedevice ................................................................. 23
Keyboard ............................................................................... 24
Important keys and keyboard shortcuts . . . . ............................................ 24
Settingsin BIOSSetup .................................................................. 25
Property and data protection . . ........................................................... 26
Anti-theft protection and lead-sealing . . . . . . ............................................ 26
Mechanical casing lock (optional) . . ................................................... 27
BIOSsetup securityfunctions ........................................................ 28
Accessauthorisationvia SmartCard .................................................. 28
Operating the SmartCard reader (optional) ............................................ 28
Troubleshooting andtips .............................................................. 29
Help ifproblemsoccur ................................................................... 29
Troubleshooting ......................................................................... 29
Power-onindicatorremains unlitafter you haveswitchedonyourdevice ................. 29
The device cannot be switched off with the On/Off switch. . ............................. 30
Monitorremains blank ............................................................... 30
No mousepointerdisplayed onthe screen ............................................ 31
Timeand/ordate isnotcorrect ....................................................... 31
Fujitsu 3
Contents
Errormessageson thescreen ........................................................ 31
Installingnewsoftware .................................................................. 31
Tips .................................................................................... 32
Systemexpansions .................................................................... 33
Information about boards ................................................................ 34
Opening the casing . . ................................................................... 35
Closingthe casing ...................................................................... 36
Overview ofthedrive baysand drivesin yourdevice ....................................... 37
Installand removethe slim-linedrive ..................................................... 39
Installingan accessibledrive ......................................................... 39
Removing anaccessible drive ........................................................ 40
Installing and removing the accessible 51/4inchdrive ...................................... 41
Fitting the drive cover for the 5 1/4inchdrive ........................................... 41
Installingan accessibledrive ......................................................... 42
Removing anaccessible drive ........................................................ 43
Insertion and removal of a SmartCard reader (optional, 3½-inch) . . .......................... 44
Removing the module holder . ........................................................ 45
Screwing the SmartCard reader onto the module holder . . .............................. 46
Inserting the module holder with the SmartCard reader . . . .............................. 47
Removing the module holder with the SmartCard reader . . .............................. 48
Removing the SmartCard reader from the module holder . .............................. 49
Installing and removing memory card reader (MultiCard) or 3½-inch hard disk drive (ESPRIMO
P55xonly)(optional,3½-inch) ............................................................ 49
Installing the memory card reader . . . ................................................. 50
Removing the memory card reader . . ................................................. 52
Installingandremoving 2½-inch/SSDhard diskdrive(ESPRIMO P55xonly) ................ 53
Installingthe harddisk drive .......................................................... 53
Removing thehard diskdrive ........................................................ 55
Installingandremoving theharddisk drivein thelowerpart ofthedevice ................... 57
Preparing installation of the 21/2-inchhard diskdrive ................................... 57
Preparing installation of the 31/2-inchhard diskdrive ................................... 58
Installinga harddiskdrive ........................................................... 59
Removing thehard diskdrive ........................................................ 60
Finishing removal of the 21/2-inchhard diskdrive ....................................... 61
Finishing removal of the 31/2-inchhard diskdrive ....................................... 62
Removing and fitting thefrontfan ........................................................ 63
Removing thefrontfan .............................................................. 63
Installingthe frontfan ................................................................ 64
Installing and removing an M.2 module . . ................................................. 65
Installing an M.2 module . ............................................................ 65
Removing an M.2 module ............................................................ 66
Installing and removing a board . . ........................................................ 67
Installing a board . . . . ................................................................ 67
Removing a board . . . ................................................................ 69
Installing and removing external WLAN antennas . ......................................... 71
InstallingexternalWLAN antennas .................................................... 71
Removing externalWLANantennas .................................................. 72
Installing and removing heat sinks ........................................................ 72
Removing the heat sink . . ............................................................ 72
Installing the heat sink . . . ............................................................ 73
Mainboard expansions . . ................................................................ 73
Upgrading mainmemory ............................................................. 73
4Fujitsu
Contents
Replacingtheprocessor ............................................................. 73
Replacingthelithiumbattery ......................................................... 74
Technicaldata ......................................................................... 75
Index .................................................................................. 76
Fujitsu 5
Contents
6Fujitsu
Your ESPRIMO
Your ESPRIMO
Overview
... is available with various configuration levels which differ in terms of hardware and software
equipment. You can install additional drives (for example a DVD drive) and other boards.
This manual tells you how to start using your device and how to operate it in daily use.
This manual applies for all configuration levels. Depending on the chosen configuration
level, some of the hardware components described may not be available on your PC.
Please also read the notes about your operating system.
Depending on the configuration selected, the operating system is preinstalled
on your hard disk (e.g. Windows).
Further information on this device is provided:
• in the poster "Getting Started"
• in the "Safety/regulations" manual
• in the "Warranty" manual
• in the operating manual for the monitor
• in the manual for the mainboard
• in your operating system documentation
• in the information files (e.g. *.PDF, *.HTML, *.DOC, *.CHM, *.TXT, *.HLP)
With the programme Acrobat Reader, you can display targeted information on the screen
quickly. It is of course also possible to print out a copy of the manual if required.
ValidityoftheReferenceManual
This Reference Manual is valid for the following systems:
• FUJITSU Desktop ESPRIMO P55x
• FUJITSU Desktop ESPRIMO P75x
• FUJITSU Desktop ESPRIMO P95x
Fujitsu 7
Your ESPRIMO
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
these warnings could pose a risk to health, damage the device or lead
to loss of data. The warranty will be invalidated if the device becomes
defective through failure to observe these warnings.
Indicates important information for the proper use of the device.
►Indicates an activity that must be performed
Indicates a result
This font indicates data entered using the keyboard in a program dialogue or at
the command line, e.g. your password (Name123) or a command used to
start a program (start.exe)
This font indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This font indicates
• terms and texts used in a software interface, e.g.: Click on Save
• names of programs or files, e.g. Windows or setup.exe.
"This font" indicates
• cross-references to another section, e.g. "Safety information"
• cross-references to an external source, e.g. a web address: For more
information, go to "http://www.fujitsu.com/fts/"
• Names of CDs, DVDs and titles or designations for other materials,
e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual
Key indicates a key on the keyboard, e.g: F10
This font indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the device
8Fujitsu
Ports and Operating Elements
Ports and Operating Elements
Ports
This chapter presents the individual hardware components of your device. This will provide
you with an overview of the ports and operating elements on the device. Please familiarise
yourself with these components before you start to work with the device.
Front
2
3
4
5
6
1
7
1 = Slim-line drive
2 = Module bay for a 51/4-inch drive
3 = Module bay for a 31/2-inch drive (optional)
4 = ON/OFF switch
5=USBports
6 = Microphone connection (right), headphone
connection (left)
In order to use a headset, connect the
headset with both connections.
7 = Latch with optional casing lock
Fujitsu 9
Ports and Operating Elements
Rear
K
5
6
3
1
2
4
1 = Device for a Security Lock
2 = Holes for a padlock
3=Alternatingvolt
age socket (AC IN)
4 = Screen socket (AC OUT, optional)
5 = Ports for external devices
(device-dependent)
6 = Slot covers
10 Fujitsu
Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.
Safety information
SafetyinformationNote
Please note the information provided in the "Safety/regulations" manual
and in the following safety notes.
When installing and operating the device, please observe the notes on
environmental conditions in Chapter "Technical data", Page 75 as well as
the instructions in Chapter "Getting started", Page 13.
When setting up the device, make sure there is clearance all around it so that
thecasingreceivesenough ventilation. In order to avoid overheating, do not
cover the ventilation areas of the monitor or the device.
You must only operate the device if the rated voltage used by the
device is set to the local mains voltage.
The main switch (if present) and the ON/OFF switch do not disconnect the
device from the mains voltage. To completely disconnect from the mains
voltage, remove the power plug from the power socket.
Only operate the device with the casing closed.
Replace the lithium battery on the mainboard in accordance with the instructions
in "Replacing the lithium battery", Page 74.
Caution, components in the system can get very hot.
The activities described in these instructions must always be
performed with the greatest care.
Repairs to the device must only be performed by qualified technicians.
Incorrect repairs could put the user at great risk or cause serious damage
to the equipment (electric shock, risk of fire).
Transporting the device
Device,Tr ansp ortation
Retransportation
Transport all parts separately in their original packaging or in a packaging which
protects them from knocks and jolts, to the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room where it will be used,
condensation may occur. Before operating the device, wait until it is absolutely dry
and has reached approximately the same temperature as the installation site.
Fujitsu 11
Important notes
Cleaning the device
Device,Tran sporta tionRetransportationSystemunit, see Devi ce
Turn off all power and equipment switches and disconnect the power
plug from the mains outlet.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic (alcohol, thinner or acetone).
Never clean the device with water! Water entering into the device could
present a serious risk to users (e.g. electric shock).
Ensure that no liquid enters the system.
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been
moistened in mild domestic detergent and then carefully wrung out.
Use disinfectant wipes to clean the keyboard and the mouse.
Energy-saving, disposal and recycling
DisposalSaving energyRecycling
You can findinformationonthesesubjectsinthe"Environment and Energy Information" manual
or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/").
12 Fujitsu
Getting started
Getting started
Gettingstarted
Please observe the safety information in the "Important notes", Page 11 chapter.
Unpacking and checking the delivery
It is recommended not to throw away the original packaging material! It may be
required for reshipment at some later date.
PackagingContentsofd eliveryPackaging,
►Unpack all the individual parts.
►Check the contents of the package for any visible damage caused during transport.
►Check whether the delivery conforms to the details in the delivery note.
►Should you discover that the delivery does not correspond to the delivery
note, notify your local sales outlet immediately.
Steps for initial setup
Preparingforfirs tuse,ove rviewPreparingforu se,
Only a few steps are necessary to put your new device into operation for the first time:
• Select a location for device and set up device
• Connect external devices such as mouse, keyboard and monitor
• Check the voltage at the mains outlet and connect the device to an electrical outlet
• Switch the device on
You will learn more about the individual steps in the following sections.
External devices
If you have received other external devices in addition to your own device (e.g.
a printer), do not connect these until after the initial installation. The following
sections describe how to connect these external devices.
Drives and boards
If you have received drives or boards with your device, please do not install
them until after first-time setup. How to install drives and boards is described
in the "System expansions", Page 33 chapter.
Fujitsu 13
Getting started
Setting up the device
WorkstationErgonomicD evice
When installing your device, please read the recommendations and safety
notes in the "Safety/regulations" manual.
We recommend that you place your device on a surface which is not slippery. In
view of the many different finishes and varnishes used on furniture, it is possible
that the rubber feet will mark the surface they stand on.
Depending on the location of your device, bothersome vibrations and noises may
occur. To prevent this, a distance of at least 10 mm / 0.39 in should be maintained
from other devices on casing sides without ventilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
of the monitor or the device.
A minimum distance of 200 mm / 7.87 in from the device must be
observed for ventilation areas.
Do not stack several devices on top of each other.
Do not expose the device to extreme ambient conditions (see "Technical data", Page 75,
section "Ambient conditions"). Protect the device against dust, humidity and heat.
Connecting the machine to the mains
Mainsadapter,
2
1
►Connect the mains cable to the machine (1).
►Plug the mains plug into a three-pin socket (2).
14 Fujitsu
Getting started
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug when disconnecting a cable. Never pull the cable!
To ensure that your device works properly, use only the supplied connection
cable or only use a high-quality connection cable.
Fujitsu 15
Getting started
Ports on the device
Interf acesExternaldevices,Device,
The ports are located on the front and back of the device. The ports available on your
device depend on the configuration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the mainboard.
Headphones, black or light
green
Headphonesport
Audio input (Line In), light blue
AudioinputLineIn
Microphone port, black or pink
Microphoneport
Audio output (Line Out), light green
AudiooutputLineOut
USB 3.1 Gen1 - Universal
Serial Bus, Type A: blue,
Type C: black
UniversalSerialBus
USB 2.0 - Universal Serial Bus, type A,
black
USB 3.1 Gen2 - Universal
Serial Bus, Type A: blue,
Type C: black
PS/2 mouse port, green
MouseportPS/2mouseport
PS/2 keyboard port, purple
Keyboardport
DVI-D monitor port
DVI-Imonitorpor t
DP Display port
Displayport
VGA monitor port, blue
Monitorport
LAN
LAN port
LANport
Serial port
Serialinterface
Parallel port
Parallelport
Some of the connected devices require special drivers (see the
documentation for the connected device).
16 Fujitsu
Getting started
Connecting a monitor
Only connect the screen to your device when it is switched off.
Depending on requirements, you can use the monitor ports of the mainboard (1) or the monitor ports
of an optional display adapter in one of the board slots (2) to connect a monitor to your device.
K
1
2
1 = Mainboard monitor ports 2 = Monitor ports of the display adapter
►Follow the instructions contained in the monitor manual to prepare the monitor
for operation (e.g. connecting cables).
►Connect the data cable to a suitable monitor port of the device (VGA, DVI-I, Display port).
The monitor power cable may only be connected to the monitor socket of the device
if the monitor current consumption is less than 1.0 A at 230 V or 2.0 A at 100 V.
The values for the monitor current consumption can be found in the technical
data on the monitor or in the operating manual for the monitor.
2
1
K
►Depending on your device configuration level, plug the monitor power cable into either
the monitor socket of the device (1) or a grounded power outlet (2).
Fujitsu 17
Getting started
When you connect the monitor to the monitor socket of the device, it automatically
switches off as soon as the device switches off.
Connecting the mouse
You can connect a USB mouse or a PS/2 mouse to your device.
Mouse,Connecting,
Connecting a USB mouse
►Connect the USB mouse to one of the USB ports on the device.
USBport,USBport
Connecting a PS/2 mouse
►Connect the PS/2 mouse to the PS/2 mouse port of the device.
PS/2mouse,Con necting,PS/2mouse,
Connecting the keyboard
Depending on the equipment level selected, your device will be supplied with
a USB keyboard or a PS/2 keyboard.
Keyboard,Connecting,
Connecting a USB keyboard
Use the supplied keyboard cable only.
USBport,Connecting,
►Plug the rectangular connector of the keyboard cable into the rectangular socket
on the underside or on the rear of the keyboard.
►Plug the flat rectangular USB connector of the keyboard cable into a USB port of the device.
USBport
Connecting a PS/2 keyboard
Use the supplied keyboard cable only.
ConnectingaPS/2keyboard
Connecting,
►Plug the rectangular connector of the keyboard cable into the rectangular socket
on the underside or on the rear of the keyboard.
►Plug the round connector of the keyboard cable into a keyboard port of the device.
Keyboard,
18 Fujitsu
Getting started
Connecting external devices to the parallel or
serial interface (optional)
ParallelportSerialportParallelportSerialportExternaldevicesDevices
External devices can be connected to the parallel or serial port (e.g. a printer or a scanner).
►Connect the data cable to the external device.
►Depending on the device, connect the data cable to the parallel port or the serial port.
For an exact description of how to connect external devices to the corresponding
port, please refer to the documentation of the external device.
Port settings
ParallelportSerialport,
You can change the port settings (e.g. address, interrupt) in the BIOS Setup.
Device drivers
Devicedrive rsDevicedrive rs,
The devices connected to the parallel or serial port require drivers. Your operating
system already includes many drivers. If the required drive is missing, install it. Current
drivers are usually available on the Internet or will be supplied on a data carrier.
Connecting external devices to the USB ports
USBdevices,USBport,Externaldevices,Devices,
You can connect a wide range of external devices to the USB ports (e.g.
printer, scanner, mouse or keyboard).
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in the documentation for the USB devices.
►Connect the data cable to the external device.
►Connect the data cable to one of the USB ports on your device.
Device drivers
External USB devices which you connect to one of the USB ports don’t usually
need their own drivers because the software required is already included in
the operating system. If the device requires separate software, please follow
the instructions in the manufacturer’s documentation.
Fujitsu 19
Getting started
Switching on for the first time: installing the software
Installing,Software,Installing,
Once the installation has been started the device must not be switched
off, unless the installation has been completed.
During installation, the device may only be rebooted when you are requested to do so!
The installation will otherwise not be carried out correctly and the contents
of the hard disk must be completely restored.
If the device is integrated into a network, the user and server details as well as
the network protocol are required during the software installation.
Contact your network administrator if you have any questions about these settings.
When you switch on the device for the first time, the supplied software
is installed and configured. Plan a reasonable amount of time for this,
as this process must not be interrupted.
Switch on the monitor and the machine
In order to avoid overheating, do not cover the ventilation areas
on the monitor or the device.
►Switch on the monitor (see operating instructions for the monitor).
►Press the on/off button on the front of the machine.
The operational display will light up and the machine will start.
20 Fujitsu
Getting started
Installing the software
►During installation, follow the on-screen instructions.
Software,Installing,
►If anything is unclear regarding the data you are asked to input, read the
online Help in your operating system.
You will find more information on the system, as well as drivers, utilities
and updates on the optional "Drivers & Utilities" DVD and on the
Internet at "http://www.fujitsu.com/fts/support".
You can find information and help on the Windows operating system functions
on the Internet at "http://windows.microsoft.com".
Fujitsu 21
Operation
Operation
Switch the device on
►If necessary, switch the monitor on (see the operating manual for the monitor).
DeviceMonitor
►Press the ON/OFF switch on the front of the device.
The power indicator glows and the device is started.
Switching off the device
►Shut down the operating system in the proper way.
Device,Monitor,
►If the operating system does not automatically switch the device into energy-saving mode or
switch it off, press the ON/OFF switch. Warning, this could lead to a loss of data!
The ON/OFF switch does not disconnect the device from the mains voltage. For complete
disconnection from the mains voltage, you must pull the mains plug out of the socket.
►If necessary, switch the monitor off (see the operating manual for the monitor).
22 Fujitsu
Operation
Indicators on the device
The indicators are on the front of the casing. Which indicators are available on your
device depends on the configuration level you have selected.
1
2
3
4
No. indicator Description
1 Drive indicators The indicator lights up when the CD-ROM or DVD drive of the
device is accessed. You must never under any circumstances
remove the CD/DVD while the indicator is lit.
2Indicator for optional
components, e.g.
SmartCard reader
The indicator lights up when the optional component, e.g. the
SmartCard reader, is accessed.
3 Power-on indicator Warning: In the energy saving mode, the device must not be
disconnected from the mains, as this can result in a loss of data.
• Indicator is illuminated:
The device is switched on.
• The indicator flashes (depending on device type):
The device is in energy-saving mode. After being switched on
with the ON/OFF switch, the device powers up or returns to the
state it was in before it entered energy-saving mode.
• The indicator is not illuminated:
The device is switched off or disconnected from the mains. If
the device is ready for operation, it can be switched on with
the ON/OFF switch.
4 Hard disk indicator The indicator lights up when the hard disk drive of the device is
accessed.
Fujitsu 23
Operation
Keyboard
KeyboardKeyb oard,Keyboard,Keyb oard,Keyboard,Keyboar d,AlphanumerickeypadCursorkeysKeys,FunctionkeysNumerickey padNumeric keypad
The illustrated keyboard is an example and may differ from the model you use.
1 2
345
1 = Function keys
2 = On/off switch (optional)
3 = Alphanumeric keypad
4=Cursorkeys
5 = Numeric keypad (calculator keypad)
Important keys and keyboard shortcuts
KeysKeyb oardshortcu ts
The description of the following keys and keyboard shortcuts applies to Microsoft
operating systems. Details of other keys and keyboard shortcuts can be found in
the documentation for the relevant application program.
Key / key combination Description
ON/OFFswitch
Button,
On/off switch (optional)
Depending on the setting in the BIOS Setup, the device can be switched
on or off with this switch. Some operating systems allow you to configure
additional functions of the ON/OFF switch in the Control Panel.
WithsomekeyboardstheON/OFFswitchcanonlybeusedwithanACPI
(Advanced Configuration and Power Management Interface). Otherwise
the key is inoperative. The mainboard must support this function.
Keys,Keys,Keys,
Enter key
confirms the highlighted selection. The Enter key is also referred to as
the "Return" key.
24 Fujitsu
Operation
Key / key combination Description
Keys,
Windows key
calls up the Windows Start menu.
Keys,
Menu key
calls up the menu for the marked item (Windows).
Keys,Keys,
Shift key
enables upper-case letters and the upper key symbols to be displayed.
Keys,
Alt Gr key (country-dependent)
produces a character shown on the bottom right of a key (e.g. the @
sign on the Qkey).
Keys,
Num Lock key
By pressing the Num Lock key you switch between the upper- and
lower-case levels of the calculator keypad.
When the Num Lock indicator is lit the numeric keypad and arithmetic
keys are active.
When the Num Lock indicator is not lit the cursor control functions on the
Numeric keypad are active.
Ctrl
Keys,KeysKeysKeys,
Ctrl key
performs a special operation when pressed in conjunction with another
key. The Ctrl key is also called the "Control" or "Control key".
AltCtrl Del
++
Ctrl+Alt+DelCtrl+Alt+DelKey skeyboard shortcuts
Windows Security/Task Manager
This key combination opens the Windows Security/Task Manager window.
Settings in BIOS Setup
BIOSSetup,
Systemsett ings,
BIOSSetup,
BIOSSetup,
BIOSSetup
Setup,
In BIOS Setup, you can set the system functions and the hardware configuration of the device.
When the PC is delivered, the default entries are valid (see "BIOS Setup" manual or manual for
the mainboard). You can customise these settings to your requirements in the BIOS Setup.
Fujitsu 25
Operation
Property and data protection
Propertyprotectio nDataprotectionSecu rity measure s
Software functions and mechanical locking offer a broad range of functions for protecting your device
and your personal data against theft and unauthorised access. You can also combine these functions.
Anti-theft protection and lead-sealing
Device,Device ,Casing,Lead-s ealingAnti-theftprotectionKensingtonLockChain
K
K
1
1 = Holes for a padlock
K
K
2
2 = Device for a Security Lock
26 Fujitsu
Operation
Anti-theft protection
You can protect your device from theft
• with the holes (1) and a padlock and chain which you have connected to a fixed object beforehand.
• with the Security Lock device (2) and a Kensington MicroSaver. Please
consult the manual for your Security Lock.
Lead-sealing
To prevent unauthorised persons from opening the casing, the casing can be lead-sealed. To do
this, feed the sealing chain through the holes (1) and seal the chain with the lead seal.
Mechanical casing lock (optional)
CasingmechanicallockCasingLoc kCasinglock
With the casing lock you can mechanically lock the casing to prohibit unauthorised persons
from opening it. The keys can be found on the rear panel of your device.
Inadditiontothec
asing lock, an open and a closed lock are also illustrated.
• Key turned towards the closed lock: The device is locked.
• Key turned towards the open lock: The device is unlocked.
Locking the casing
►Turn the key towards the closed lock .
Unlocking the casing
►Turn the key towards the open lock .
Fujitsu 27
Operation
BIOS setup security functions
SecurityfunctionsBIOSSetup
The Security menu in BIOS Setup offers you various options for protecting your
personal data against unauthorized access, e.g.:
• Prevent unauthorized access to BIOS Setup
• Prevent unauthorised system access
• Prevent unauthorised access to the settings of boards with their own BIOS
• Activate virus warnings
• Protect BIOS from overwriting
• Protect the device from being switched on by an external device
You can also combine these functions.
You will find a detailed description of the Security menus and how to assign passwords
in the manual for the mainboard or in the "BIOS Setup" manual.
Access authorisation via SmartCard
SecurityfunctionsAccesspermission,SmartCard
In systems equipped with a SmartCard reader, access can be restricted to those
users who have a corresponding SmartCard.
Operating the SmartCard reader (optional)
Operation of a SmartCard reader with a RFID reader is not permitted in Taiwan.
►Connect the external SmartCard reader to your system as described in
the instructions for the SmartCard reader.
SmartCardreader,
After the device is switched on, you will be prompted to insert your SmartCard.
28 Fujitsu
Troubleshooting and tips
Troubleshooting and tips
Refer to the safety notes in the "Safety/regulations" manual and in the "Getting
started", Page 13 chapter when connecting or disconnecting cables.
If a fault occurs, try to correct it as described in the following documentation:
• in this chapter
• in the documentation for the connected devices
• in the help systems of the software used
• in the documentation for your operating system
Help if problems occur
Should you encounter a problem with your computer that you cannot resolve yourself:
►Note the ID number of your device. The ID number is found on the type rating
plate on the back, the underside or the top of the casing.
►Contact the Service Desk responsible for your country for clarification of the problem:
"http://support.ts.fujitsu.com/contact/servicedesk". When you do this, please have
ready the ID number and serial number of your system.
Troubleshooting
Power-on indicator remains unlit after you have
switched on your device
Cause Troubleshooting
The mains voltage supply is faulty. ►Check whether the power cable is plugged
properly into the device and a grounded
mains outlet.
Internal power supply overloaded. ►Pull the power plug of the device out of the
mains outlet.
►Wait approx. 3 min.
►Plug the power plug into a properly grounded
mains outlet again.
►Switch the device on.
Fujitsu 29
Troubleshooting and tips
The device cannot be switched off with the On/Off switch.
Cause Troubleshooting
System crash ►Press the On/Off switch for at least
4 seconds, until the device switches off.
Attention: Warning, this could lead to a loss of
data!
The Operating System is not shut-down properly
in the process. Error messages are therefore
possible the next time the system is booted.
Monitor remains blank
Cause Remedy
Monitor is switched off ►Switch your monitor on.
Power saving has been activated (screen is
blank)
►Press any key on the keyboard.
or
►Deactivate the screen saver. If
necessary, enter the appropriate
password.
Brightness control is set to dark ►Adjust the brightness control. For detailed
information, please refer to the operating
manual supplied with your monitor.
Power cable not connected ►Switch off the monitor and the device.
►Check that the monitor power cable is
properly connected to the monitor and to
a grounded mains outlet or to the monitor
socket of the device.
►Check that the device power cable is
properly plugged into the device and a
grounded mains outlet.
►Switch on the monitor and the device.
Monitor cable not connected ►Switch off the monitor and the device.
►Check that the monitor cable is properly
connected to the device and monitor.
►Switch on the monitor and the device.
Incorrect setting for the monitor ►Restart the system.
►Press F8while the system is booting.
►Start the system in Safe Mode.
►Set up the monitor as described in the
documentation for your operating system
and monitor.
30 Fujitsu
Troubleshooting and tips
No mouse pointer displayed on the screen
Cause Remedy
The mouse is not correctly connected. ►Shut down your operating system in the
proper manner, for instance using Ctrl +
Alt +Del .
►Switch the device off.
►Check that the mouse cable is properly
connected to the system unit. If you use an
adapter or extension lead with the mouse
cable, check the connections.
►Make sure that only one mouse is
connected.
►Switch the device on.
Disabled USB ports ►In the BIOS Setup, check whether the USB
ports are Enabled (see the "BIOS Setup"
manual or the mainboard manual
Time and/or date is not correct
Cause Remedy
Time and date are incorrect. ►Set the correct time and date within the
operating system you are using.
or
►Set the correct time and/or date in the
BIOS Setup.
The lithium battery is discharged. ►If the time and date are repeatedly wrong
when you switch on your device, replace the
lithium battery (see "Replacing the lithium
battery", Page 74).
Error messages on the screen
Error messages and their explanations are provided:
• in the technical manual for the mainboard
• in the documentation for the programs used
Installing new software
When installing programs or drivers, important files may be overwritten and modified. To
be able to access the original data in the event of any problems following installation,
you should backup your hard disk prior to installation.
Fujitsu 31
Troubleshooting and tips
Tips
Topic Tip
Out of system resources ►Close unnecessary applications.
or
►Run the applications in a different order.
32 Fujitsu
System expansions
System expansions
Upgrades,Device,System expansionComponentsServicing
Repairs to the device must only be performed by qualified technicians. Incorrect repairs
may greatly endanger the user (electric shock, fire risk) and will invalidate your warranty.
After consulting the Hotline/Service Desk, you may remove and install the
components described in this manual yourself.
As the device has to be shut down in order to install/deinstall system hardware
components, it is a good idea to print out the relevant sections of this chapter beforehand.
The following illustrations may differ slightly from your device, depending on its configuration level.
If further documentation was delivered with your device, please also read this through carefully.
In addition, before removing or installing system components, please pay attention to the following:
The device must be switched off when installing/removing the system
expansions and may not be in energy-saving mode.
Remove the power plug before opening the device.
Be careful that no wires become trapped when removing or installing components.
When installing components that become very hot, make sure that the maximum
permissible temperature of the components in operation is not exceeded.
An update of the BIOS may be required for a system expansion or hardware
upgrade. Further information can be found in the BIOS help section or if
necessary in the Technical Manual for the mainboard.
Fujitsu 33
System expansions
Information about boards
Take care with the locking mechanisms (catches and centring pins) when you
are replacing boards or components on boards.
Note that some components on the mainboard may be very hot if the device was
in use shortly before the casing was removed.
To prevent damage to the board or the components and conductors on it, please take care when
you insert or remove boards. Make sure expansion boards are inserted straightly.
Never use sharp objects (screwdrivers) for leverage.
Boards with electrostatic sensitive devices (ESD) are identifiable by the label
shown.
When handling boards fitted with ESDs, you must always observe the
following points:
• You must always discharge static build up (e.g. by touching a grounded
object) before working.
• The equipment and tools you use must be free of static charges.
• Only touch or hold the boards by the edge or, if present, at the areas
marked green (Touch Points).
• Never touch pins or conductors on boards fitted with ESDs.
34 Fujitsu
System expansions
Opening the casing
Casing,Device,
►Switch the device off. The device must not be in power-saving mode.
Please observe the safety information in "Important notes", Page 11.
Disconnect the mains plug from the mains outlet.
Only insert the power plug after you have closed the casing.
►Remove any connected wires which are in the way.
►On devices with a casing lock: Unlock the casing.
►Lay the device on its side in the manner shown.
1
2
►Pull the locking device (1) and swivel the side part in the direction of the arrow (2).
Fujitsu 35
System expansions
Closing the casing
►Insert the side part in the guide rail on the lower part of the casing.
Casing,Device,
1
►Swivel the side cover in the direction of the arrow (1) until it engages.
►Ondeviceswithacasinglock: Lockthecasing.
►Reconnect the cables that you disconnected before.
36 Fujitsu
System expansions
Overview of the drive bays and drives in your device
Depending on the device version selected, your device has the following bays
for accessible and non-accessible drives.
"Accessible drives" are e.g. DVD or CD ROM drives, into which a data medium can be
inserted from outside. "Non-accessible drives" are for example hard disk drives.
Both device versions have an additional bay for an M.2 module on the
motherboard, which is not marked in the illustrations below.
FUJITSU Desktop ESPRIMO device version 1
5
1
2
3
4
1 = Drive bay for an accessible slimline drive
2 = Drive bay for an accessible 51/4-inch drive
3 = Drive bay for Drive bay for a 1/2-inch
hard disk drive or an accessible
31/2-inch drive (e.g. SmartCard reader,
memory card reader)
4=Drivebayfo
ra2
1/2-inch hard disk
drive / SSD
5=Drivebayfora3
1/2-inch or 21/2-inch
hard disk drive (with adapter)
Fujitsu 37
System expansions
FUJITSU Desktop ESPRIMO device version 2
44
1
2
3
1 = Drive bay for an accessible slimline drive
2 = Drive bay for an accessible 51/4-inch drive
3 = Drive bay for an accessible 31/2-inch
drive (optional, e.g. SmartCard reader,
memory card reader)
4 = Drive bay for a 31/2-inch or 21/2-inch
hard disk drive (with adapter)
38 Fujitsu
System expansions
Install and remove the slim-linedrive
Installing an accessible drive
To use the locking function of the slimline drive, you must fit the appropriate drive
plate on the drive before installing the drive in the casing.
►Open the casing (see "Opening the casing", Page 35).
►If you have already fitted a cover (optional), remove it.
Do not throw away the cover. For cooling and protection against fire you must refitthe
cover if you remove the drive again later (see "Removing an accessible drive", Page 43).
1
a a
b
1
►Take the drive cover (a) out of the holder in the direction of the arrow (1).
►Attach the drive cover (a) to the slim-line drive (b).
2
c
►Slide the drive into the housing (2) until it slots into place in the lock (c).
►Close the casing (see "Closing the casing", Page 36).
Fujitsu 39
System expansions
It may be necessary to modify the entry for the drive in the BIOS Setup.
Removing an accessible drive
►Open the casing (see "Opening the casing", Page 35).
1
2
a
3
►Press the release button (1).
►Press the clip (a) in the direction of the arrow (2).
The drive will be pushed forward out of the slot.
►Pull the drive out of the casing in the direction of the arrow (3).
►Remove the drive cover (b) from the drive (c).
►Insert the drive cover in the direction of the arrow (4) into the holder.
►If necessary, make the required settings on the remaining hard disk drives.
►If you are not installing a new drive, reinstall the previously removed cover (optional) for the
purposes of cooling, fire protection and to prevent foreign objects from getting into the casing.
►Close the casing (see "Closing the casing", Page 36).
It may be necessary to modify the entry for the drive in the BIOS Setup.
40 Fujitsu
System expansions
Installing and removing the accessible 51/4inch drive
Fitting the drive cover for the51/4inch drive
To use the latch function of the accessible 51/4inch drive, you must fit the corresponding
drive cover before installing the drive in the casing. Proceed as follows:
►Open the casing (see "Opening the casing", Page 35).
1
►Remove the drive cover from the bracket in the direction of the arrow (1).
1
►Connect the drive cover to the drive (1).
Fujitsu 41
System expansions
Installing an accessible drive
►Open the casing (see "Opening the casing", Page 35).
►Break out the pre-cut plastic cover on the drive bay.
►Fit the drive cover for the 51/4inch drive (see "Fitting the drive cover for
the 5 1/4inch drive", Page 41).
1
►Slide the accessible drive into the casing until it snaps in place (1).
►Connect the cables to the drive. Make sure the polarity is correct.
►Close the casing (see "Closing the casing", Page 36).
It may be necessary to modify the entry for the drive in the BIOS Setup.
42 Fujitsu
System expansions
Removing an accessible drive
►Open the casing (see "Opening the casing", Page 35).
2
1
►Disconnect the cables connected to the drive.
►Slide the clip in the direction of the arrow (1).
►Pull the drive out of the casing in the direction of the arrow (2).
1
►Remove the drive cover from the drive (1).
1
►Place the drive cover on the holder in the direction of the arrow (1).
►If necessary, make the required settings on the remaining hard disk drives.
►Close the casing (see "Closing the casing", Page 36).
Fujitsu 43
System expansions
It may be necessary to modify the entry for the drive in the BIOS Setup.
Insertion and removal of a SmartCard reader
(optional, 3½-inch)
The insertion and removal of a SmartCard reader is only possible if you
have ordered a corresponding type of device. It is not possible to retrofitthe
housing with the necessary components inside it.
The operation of this system is not permitted in Taiwan.
You can install a SmartCard reader, a memory card reader (MultiCard) or a 3½-inch hard
disk drive (ESPRIMO P55x only) in the upper drive bay for 3½-inch drive, depending on the
device variant ( see "Installing and removing memory card reader (MultiCard) or 3½-inch
hard disk drive (ESPRIMO P55x only) (optional, 3½-inch)", Page 49).
The SmartCard reader is inserted in a module holder (optional). If you ordered a
device with a SmartCard reader, the module holder and the SmartCard reader will
already have been installed when the device was delivered to you.
If you ordered a device without a SmartCard reader, a dummy cover will
have been fitted instead of the module holder.
44 Fujitsu
System expansions
Removing the module holder
►Open the casing (see "Opening the casing", Page 35).
►Disconnect the cables connected to the module holder.
2
11
►Remove the screws (1).
►Lift the drive cage out of the casing in the direction of the arrow (2).
2
1
1
1
1
►Remove the screws (1).
►Slide the module holder out of the drive cage in the direction of the arrow (2).
Fujitsu 45
System expansions
Screwing the SmartCard reader onto the module holder
2
2
a
a
1
►Push the SmartCard reader - with the
component side facing downwards - into
the guide on the module holder (a) in
the direction of the arrow (1).
►Secure the SmartCard reader with
the screws (2).
46 Fujitsu
System expansions
Inserting the module holder with the SmartCard reader
1
2
2
2
2
►Push the module holder into the drive cage in the direction of the arrow (1).
►Fasten the module holder with the screws (2).
1
22
►Position the drive cage in the casing in the direction of the arrow (1).
►Secure the drive cage with the screws (2).
►Connect the cables to the boards and the mainboard. Make sure the polarity is correct.
►Close the casing (see "Closing the casing", Page 36).
Fujitsu 47
System expansions
Removing the module holder with the SmartCard reader
►Open the casing (see "Opening the casing", Page 35).
►Disconnect the cables connected to the module holder.
2
11
►Remove the screws (1).
►Lift the drive cage out of the casing in the direction of the arrow (2).
2
1
1
1
1
►Remove the screws (1).
►Slide the module holder out of the drive cage in the direction of the arrow (2).
►Release the SmartCard reader from the module holder (see "Removing the SmartCard
reader from the module holder", Page 49) and reinsert the module holder (this corresponds
to "Inserting the module holder with the SmartCard reader", Page 47).
or
►Release the SmartCard reader from the module holder (see "Removing the SmartCard
reader from the module holder", Page 49) and insert a dummy cover into the drive bay.
►Close the casing (see "Closing the casing", Page 36).
48 Fujitsu
System expansions
Removing the SmartCard reader from the module holder
1
1
►Undo the screws (1).
►Pull the SmartCard reader out of the module
holder in the direction of the arrow (2).
Installing and removing memory card reader
(MultiCard) or 3½-inch hard disk drive (ESPRIMO
P55x only) (optional, 3½-inch)
The installation and removal of a memory card reader or hard disk drive is only
possible if you have ordered a corresponding device variant. It is not possible to
retrofit the casing with the necessary components inside it.
You can install a memory card reader (MultiCard), a 3½-inch hard disk drive (ESPRIMO
P55x only) or a SmartCard reader in the drive bay for 3½-inch drive (see "Insertion and
removal of a SmartCard reader (optional, 3½-inch)", Page 44).
Unlike the SmartCard reader, the memory card reader and the hard disk drive
can be inserted directly into the device without a module holder.
The process is identical for a memory card reader device and hard disk drive.
Installation and removal using a memory card reader device is described below.
Fujitsu 49
System expansions
Installing the memory card reader
►Open the casing (see "Opening the casing", Page 35).
2
11
►Remove the screws (1).
►Lift the drive cage out of the casing in the direction of the arrow (2).
►Press the blanking plate in and then break it out of the housing.
1
2
2
2
2
►Push the memory card reader into the drive cage in the direction of the arrow (1).
►Fasten the memory card reader with the screws (2).
50 Fujitsu
System expansions
Removing the memory card reader
►Open the casing (see "Opening the casing", Page 35).
►Disconnect the cables connected to the memory card reader.
2
11
►Remove the screws (1).
►Lift the drive cage out of the casing in the direction of the arrow (2).
2
1
1
1
1
►Remove the screws (1).
►Slide the memory card reader out of the drive cage in the direction of the arrow (2).
52 Fujitsu
System expansions
1
22
►Position the drive cage in the casing in the direction of the arrow (1).
►Fasten the screws (2).
►Install a blind cover in the drive bay.
►Close the casing (see "Closing the casing", Page 36).
Installing and removing 2½-inch / SSD hard
disk drive (ESPRIMO P55x only)
For device variant ESPRIMO P55x, a 2½-inch hard disk drive / SSD can
also be installed under the drive cage.
Installing the hard disk drive
►Open the casing (see "Opening the casing", Page 35).
2
11
►Remove the screws (1).
►Lift the drive cage out of the casing in the direction of the arrow (2).
Fujitsu 53
System expansions
1
2
2
►Place the hard disk drive onto the drive cage (1).
►Fasten the hard disk drive with the screws (2).
1
22
►Position the drive cage in the casing in the direction of the arrow (1).
►Fasten the screws (2).
►Connect the cables to the hard disk drive.
►Close the casing (see "Closing the casing", Page 36).
54 Fujitsu
System expansions
Removing the hard disk drive
►Open the casing (see "Opening the casing", Page 35).
►Disconnect the cables connected to the hard disk drive.
2
11
►Remove the screws (1).
►Lift the drive cage out of the casing in the direction of the arrow (2).
2
1
1
►Remove the screws (1).
►Remove the hard disk drive from the drive cage (2).
Fujitsu 55
System expansions
Installing and removing the harddiskdrivein
the lower part of the device
The device versions ESPRIMO P75x and P95x have two hard disk drive bays in the
lower area. The device version ESPRIMO P55x may have one or two lower hard disk
drive bays. The following description applies to both hard disk drive bays.
31/2-inch hard disk drives are secured in the drive bay with EasyChange
rails. 21/2-inch hard disk drives are installed in an additional adapter, which
is in turn secured with EasyChange rails.
The EasyChange rails for the installation are provided together with the particular drive.
Preparing installation of the 21/2-inch hard disk drive
1
2
►Insert the hard disk drive into the adapter (1).
►Fasten the hard disk drive with the screws (2).
►Secure the EasyChange rails to the side of the adapter by inserting the upper pins of
the EasyChange rail into the corresponding holes of the adapter.
Fujitsu 57
System expansions
Preparing installation of the 31/2-inch hard disk drive
►Secure the EasyChange rails to the side of the hard disk drive by inserting the upper
pins of the EasyChange rail in the corresponding holes of the hard disk.
58 Fujitsu
System expansions
Installing a hard disk drive
►Open the casing (see "Opening the casing", Page 35).
1
►Slide the hard disk drive with the EasyChange rails into the drive cage in the direction of the arrow
(1). Check that the component side of the hard disk drive faces inwards towards the casing floor.
►Connect the cables to the hard disk drive.
►Close the casing (see "Closing the casing", Page 36).
It may be necessary to modify the entry for the drive in the BIOS Setup.
Fujitsu 59
System expansions
Removing the hard disk drive
►Open the casing (see "Opening the casing", Page 35).
1
2
1
►Slightly press together the EasyChange rails mounted on the hard disk drive (1) and carefully
pull the hard disk drive slightly out of the drive cage in the direction of the arrow (2).
►Disconnect the cables connected to the hard disk drive.
It may be necessary to modify the entry for the drive in the BIOS Setup.
60 Fujitsu
System expansions
Finishing removal of the 21/2-inchharddiskdrive
►Pull the EasyChange rails off the hard disk drive.
►If you no longer need the EasyChange rails, secure them again at their drive bay in the casing.
2
1
►Remove the screws (1).
►Take the hard disk drive out of the adapter (2).
Fujitsu 61
System expansions
Finishing removal of the 31/2-inchharddiskdrive
►Pull the EasyChange rails off the hard disk drive.
►If you no longer need the EasyChange rails, secure them again at their drive bay in the casing.
62 Fujitsu
System expansions
Removing and fitting the front fan
In order to remove or fit long component groups or M.2 modules, it is necessary to remove
the front fan under the front panel while working on the device.
Removing the front fan
►Instructions: Open the casing (see "Opening the casing", Page 35).
►Disconnect the fan cable from the mainboard.
4
3
1
2
1
1
1
►Release the detents of the front cover (1).
►Remove the front cover from the casing in the direction of the arrow (2).
►Release the detent (3) and slide the fan away from the casing in the direction of the arrow (4).
You can now remove or install the M.2 module or long modules.
Fujitsu 63
System expansions
Installing the front fan
1
2
►Attach the front fan to the centering pins on the housing and move it in the direction of the arrow (1).
The front fan will then be locked in position.
►Fit the front cover onto the casing (2).
►Connect the fan cable to the mainboard.
►Close the casing (see "Closing the casing", Page 36).
64 Fujitsu
System expansions
Installing and removing an M.2 module
Installing an M.2 module
►Open the casing (see "Opening the casing", Page 35).
b
a
1
►Insert the M.2 module (b) at a slight angle in the direction of the arrow
(1) into the slot (a) on the mainboard.
c
A B
d
►Variant A with screw: Secure the M.2 module on the mainboard with the screw (c).
or
►Variant B with plastic lock. Secure the M.s module by closing the
plastic lock (d) on the mainboard.
►Close the casing (see "Closing the casing", Page 36).
If necessary, you must adjust the entry for the drive accordingly in the BIOS Setup.
Fujitsu 65
System expansions
Removing an M.2 module
►Open the casing (see "Opening the casing", Page 35).
1
A B
b
a
►Variant A with screw: Undo the screw (a).
or
►Variant B with plastic lock. Open the plastic lock.
d
c
1
►Pull the M.2 module (d) slightly at an angle in the direction of the arrow (1) and out
of the slot (c) on the mainboard and remove it from the casing.
►Close the casing (see "Closing the casing", Page 36).
If necessary, you must adjust the entry for the drive accordingly in the BIOS Setup.
66 Fujitsu
System expansions
Installing and removing a board
You can install additional modules in order to increase the performance of your machine.
The number, position and arrangement of the board slots on the mainboard can be found in
the manual for the mainboard. Boards may already be installed on shipment.
Board,Board,
Installing a board
►For long modules: Remove the front fan (see "Removing and fitting the front fan", Page 63).
►Open the casing (see "Opening the casing", Page 35).
Board
2
1
a
►Fold the module lock (a) upwards to open it.
►Loosen the screw on the slot cover (1), if one is fitted.
►Pull the slot cover out of the slot in the direction of the arrow (2).
Fujitsu 67
System expansions
Do not throw away the slot cover. For cooling, protection against fire and in order to
comply with EMC regulations, you must refit the slot cover if you remove the board.
a
1
2
►Push the board into the slot (1).
►Secure the module with the screw (2), if one is fitted.
►Fold the module lock (a) back down to close it.
►If necessary, connect the cables to the board.
►For long modules: Install the front fan (see "Removing and fitting the front fan", Page 63).
►Close the casing (see "Closing the casing", Page 36).
If you have installed or removed a board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the PCI board documentation.
68 Fujitsu
System expansions
Removing a board
►For long modules: Remove the front fan (see "Removing and fitting the front fan", Page 63).
►Open the casing (see "Opening the casing", Page 35).
Board
►Disconnect the cables connected to the board.
3
1
2
a
►Fold the module lock (a) upwards to open it.
►Loosen the screw on the module (1), if one is fitted.
Modules in the PCI Express x16 slot are also secured at the bottom of the
slot with a locking latch (2). Push the latch to the side to release the card.
You can then remove the card as described below.
►Pull the slot cover out of the slot in the direction of the arrow (3).
►Place the board in suitable packaging.
Fujitsu 69
System expansions
For cooling, protection against fire, and in order to comply with EMC (electromagnetic
compatibility) regulations, you must refit the slot cover.
1
2
a
►Slide the slot cover into the slot (1).
►Secure the slot cover with the screw (2), if one is provided.
►Fold the module lock (a) back down to close it.
►For long modules: Install the front fan (see "Removing and fitting the front fan", Page 63).
►Close the casing (see "Closing the casing", Page 36).
If you have installed or removed a PCI board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the PCI board documentation.
70 Fujitsu
System expansions
Installing and removing external WLAN antennas
If you have installed a suitable board, you can install and remove the associated
WLAN antennas as described below.
Operation of WLAN antennas is not permitted in Taiwan.
Installing external WLAN antennas
• A suitable board is installed (see "Installing a board", Page 67).
1
2
3
3
►Working in the direction of the arrow (1), place the WLAN antennas onto
the plug-in positions of the board (2).
►Secure the WLAN antennas by turning in the direction of the arrow (3).
►Align the WLAN antennas as required.
Fujitsu 71
System expansions
Removing external WLAN antennas
3
2
1
1
►Undo the WLAN antennas by turning in the direction of the arrow (1).
►Pull the WLAN antennas in the direction of the arrow (3) and away from
the plug-in positions of the board (2).
Installing and removing heat sinks
Removing the heat sink
The shape and position of the heat sink are device-dependent.
►Open the casing (see "Opening the casing", Page 35).
►Disconnect the fan cable (FAN1 or FAN (CPU)) from the mainboard.
►Undo the screws on the heat sink.
►Lift the heat sink out of the casing.
You can now replace the processor.
Never operate the device without a heat sink! Before initial startup, install the heat
sink again in the same way as it was installed in the device before removal.
72 Fujitsu
System expansions
Installing the heat sink
►Open the casing (see "Opening the casing", Page 35).
Install the heat sink again in the same way as it was fitted in the
device at the time of removal.
►Insert the heat sink into the casing. To do this, correctly align the screw holes on
the heat sink with the screw holes on the mainboard.
►Tighten the screws.
►Connect the fan cables to the mainboard.
►Close the casing (see "Closing the casing", Page 36).
Mainboard expansions
Details on how to upgrade the main memory or the processor of your device
can be found in the manual for the mainboard.
UpgradesLithiumb at teryProcessorMainmemoryMainboard
Upgrading main memory
►Open the casing (see "Opening the casing", Page 35).
Mainmemory
►Upgrade the main memory according to the description in the manual for the mainboard.
►Close the casing (see "Closing the casing", Page 36).
Replacing the processor
►Open the casing(see"Opening the casing", Page 35).
►Remove the heat sink (see "Removing the heat sink", Page 72).
►Replace the processor as described in the manual for the mainboard.
►Install the heat sink again (see "Installing the heat sink", Page 73).
►Close the casing (see "Closing the casing", Page 36).
Fujitsu 73
System expansions
Replacing the lithium battery
In order to permanently save the system information, a lithium battery is installed to provide
the CMOS-memory with a current. A corresponding error message notifies the user when the
charge is too low or the battery is empty. The lithium battery must then be replaced.
Incorrect replacement of the lithium battery may lead to a risk of explosion!
The lithium battery may be replaced only with an identical battery or with
a type recommended by the manufacturer.
Do not dispose of lithium batteries with household waste. They must be disposed
of in accordance with local regulations concerning special waste.
Make sure that you observe the correct polarity when replacing the lithium
battery. The plus pole must be on the top!
Lithiumbattery,Replacing,Replacing,Re placing,lithiumbatteryBattery
The lithium battery holder exists in different designs that function in the same way.
1
23
1
2
3
►Press the catch in the direction of the arrow (1).
The battery jumps out of the holder slightly.
►Remove the battery (2).
►Push the new lithium battery of the identical type into the holder (3) and
press it down until it engages.
74 Fujitsu
Technical data
Technical data
Electrical data
Protection class: I
Rated voltage range 100 V – 240 V
Rated frequency 50 Hz – 60 Hz
Max. rated current
(with monitor socket):
100V–240V
5.2–2.5A
Max. rated current
(without monitor socket):
100V–240V
4.6–2.1A
Max. rated current
(optional monitor socket):
100V–240V
2.0–1.0A
Dimensions
Width/depth/height: 180 mm x 304 mm x 371 mm /
7,09 in x 11,97 in x 14,61 in
Weight
in basic configuration: c. 8 kg /
17,64 lbs
Ambient conditions
Environment class 3K2
Environment class 2K2
DIN IEC 721 part 3-3
DIN IEC 721 part 3-2
Temperature
Operation (3K2) 10 °C .... 35 °C / 50 °F ... 95 °F
Transportation (2K2) -25 °C .... 60 °C / -3 °F ... 140 °F
The formation of condensation is not permitted while the device is in operation !
Clearance required to ensure adequate ventilation:
without air vents at least 10 mm /
0,39 in
with air vents at least 200 mm /
7,87 in
The data sheets of these devices contains further technical data. The data sheets
can be found on our website at "http://www.fujitsu.com/fts/".
Fujitsu 75
Index
Index
A
Access permission, SmartCard 28
Alphanumeric keypad 24
Anti-theft protection 26
Audio input 16
Audio output 16
B
Battery 74
BIOS Setup 25
security functions 28
BIOS Setup,
configuration 25
settings 25
system settings 25
Board
installing 67
removing 69
Board,
installing 67
removing 67
Button,
ON/OFF switch 24
C
Casing
Mechanical lock 27
Casing lock 27
Casing mechanical lock 27
Casing,
closing 36
Lead-sealing 26
opening 35
Chain 26
Components
installing/removing 33
Connecting a PS/2 keyboard 18
Connecting,
keyboard 18
mouse 18
PS/2 keyboard 18
PS/2 mouse 18
USB keyboard 18
Contents of delivery 13
Ctrl+Alt+Del 25
Cursor keys 24
D
Data protection 26
Device
setting up 14
Switching on 22
Device drivers
Parallel port 19
Device drivers,
Serial port 19
Device,
Anti-theft protection 26
closing 36
Lead-sealing 26
opening 35
ports 16
switching off 22
transporting 11–12
upgrades 33
Devices
connecting 19
Devices,
connecting 19
Displayport 16
Disposal 12
DVI-I monitor port 16
E
Ergonomic
Workstation 14
External devices
connecting 19
External devices,
connecting 19
ports 16
F
Function keys 24
G
Getting started 13
H
Headphones port 16
I
Important notes 11
Installing,
software 20–21
switching on for the first time 20
Interfaces 16
76 Fujitsu
Index
K
Kensington Lock 26
Keyboard 24
Keyboard port 16
keyboard shortcuts 25
Keyboard shortcuts 24
Keyboard,
alphanumeric keypad 24
connecting 18
cursor keys 24
function keys 24
numeric keypad 24
port 18
Keys 24
Ctrl 25
Ctrl+Alt+Del 25
Keys,
Alt Gr 25
Control 25
Ctrl key 25
cursor keys 24
Enter 24
Enter key 24
menu key 25
Num Lock 25
Return 24
shift 25
shift key 25
Start key 25
L
LAN port 16
Lead-sealing 26
Line In 16
Line Out 16
Lithium battery 73
Lithium battery,
replacing 74
Lock 27
M
Main memory 73
upgrading 73
Mainboard
Upgrades 73
Mains adapter,
connecting 14
Microphone port 16
Monitor
Switching on 22
Monitor port 16
Monitor,
switching off 22
Mouse port 16
Mouse,
connecting 18
N
Note
safety 11
Notes
important 11
Numeric keypad 24
O
ON/OFF switch 24
Overview
Device 7
P
Packaging 13
Packaging,
unpacking 13
Parallel port 16, 19
Connecting devices 19
Settings 19
Ports 9
Preparing for first use, overview 13
Preparing for use,
overview 13
Processor 73
Property protection 26
PS/2 mouse port 16
PS/2 mouse,
connecting 18
port 18
R
Recycling 12
Replacing,
lithium battery 74
Replacing, lithium battery 74
Retransportation 11–12
S
Safety information 11
Saving energy 12
Security functions
BIOS Setup 28
SmartCard 28
Security measures 26
Serial interface 16
Fujitsu 77
Index
Serial port 19
Connecting devices 19
Serial port,
Settings 19
Servicing 33
Setup,
see BIOS Setup 25
SmartCard reader,
operating 28
Software,
installing 20–21
System expansion 33
System settings,
BIOS Setup 25
System unit, see Device 12
T
Transportation 11–12
U
Universal Serial Bus 16
Upgrades
Mainboard 73
Upgrades,
device 33
USB devices,
connecting 19
USB port 18
USB port,
connecting devices 19
connecting keyboard 18
connecting the mouse 18
W
Workstation 14
78 Fujitsu