Table of Contents
- FUJITSU Desktop ESPRIMO Q55x / Q958 / Q956 / Q957 / Q7010
- Contents
- Your ESPRIMO
- Ports and Operating Elements
- Important notes
- Getting started
- Operation
- Troubleshooting and tips
- Help if problems occur
- Troubleshooting
- Power-on indicator remains unlit after you have switched on your device
- The device cannot be switched off with the On/Off switch.
- Monitor remains blank
- No mouse pointer displayed on the monitor
- Date and time are not correct
- SmartCard reader is not recognised
- SmartCard PIN forgotten
- SmartCard lost
- User and/or supervisor SmartCard lost
- Error messages on the screen
- Installing new software
- Tips
- System expansions and repairs
- Technical data
- Index
Fujitsu Q7010 User Manual
Displayed below is the user manual for Q7010 by Fujitsu which is a product in the PCs/Workstations category. This manual has pages.
Related Manuals
System
Operating Manual
FUJITSU Desktop
ESPRIMO Q55x / Q958
ESPRIMO Q956 / Q957
ESPRIMO Q7010
Thank you for buying an innovative product from Fujitsu.
Latest information about our products, useful tips, updates etc. is available
on our website: "http://www.fujitsu.com/fts/"
You can find driver updates at: "http://support.ts.fujitsu.com/download"
Should you have any technical questions, please contact:
• our Hotline/Service Desk ("http://support.ts.fujitsu.com/contact/servicedesk")
• Your sales partner
• Your sales office
We hope you enjoy using your new Fujitsu system!
Remarks
Notes on the product description are consistent with Fujitsu´s design specifications and
are made available for comparison purposes. The actual results may differ due to several
factors. Technical data is subject to change without notification. Fujitsu does not accept
any responsibility for technical or editorial errors nor for omissions.
Trademarks
Fujitsu, the Fujitsu logo and ESPRIMO are registered trademarks of Fujitsu Limited
or its subsidiaries in the USA and other countries.
PS/2 is a registered trademark of International Business Machines, Inc.
Kensington is a registered trademark of the ACCO brand.
USB Type-C™ and USB-C™ are trademarks of the USB Implementers Forum
in the USA and other countries.
The terms HDMI and HDMI High-Definition Multimedia Interface and the HDMI logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation
in the USA and/or other countries respectively.
All other trademarks mentioned here are the property of their particular owner.
Copyright
No part of this publication may be copied, reproduced or translated without
prior written permission from Fujitsu.
No part of this publication may be stored or transmitted in any electronic manner
without written permission from Fujitsu.
Contents
Contents
YourESPRIMO ......................................................................... 5
Validityof the Reference Manual ......................................................... 5
Notational conventions .................................................................. 6
Ports and Operating Elements ......................................................... 7
Front ................................................................................... 7
Rear ................................................................................... 11
Importantnotes ........................................................................ 15
Safetynotes ............................................................................ 15
Transportingthedevice .................................................................. 15
Cleaning thedevice ..................................................................... 16
Energy-saving,disposal andrecycling .................................................... 16
Important notes for ESPRIMO Q957/Q958/Q7010 . . .................................... 16
Gettingstarted ......................................................................... 17
Unpacking and checking thedelivery ..................................................... 17
Steps for initial setup .................................................................... 17
Fitting the underside cover (device-dependent) ............................................ 18
Setting up the device .................................................................... 20
Operating position ................................................................... 20
Attach adhesive feet (optional) ....................................................... 23
Fitting the base(optional) ............................................................ 24
Fitting the device to theVESAinterface onamonitor(optional) ......................... 25
Connecting thepowercable ............................................................. 32
Connecting externaldevices ............................................................. 34
Ports on the device .................................................................. 34
Connecting themonitor .............................................................. 35
Connecting a USBmouse ............................................................ 35
Connecting a USB keyboard . . ....................................................... 35
Connecting externaldevicesto theserialinterface ..................................... 35
Connectingexternal devicesto theUSBports ......................................... 36
ConnectingaPS/2device ............................................................ 36
Initial switch-on:Softwarewillbeinstalled ................................................. 37
Switch on themonitor andthemachine ............................................... 37
Installingthe software ............................................................... 38
Operation .............................................................................. 39
Switchthe deviceon .................................................................... 39
Switching thedevice off ................................................................. 39
Indicatorsonthedevice ................................................................. 40
Keyboard ............................................................................... 41
Importantkeysandkeycombinations ................................................. 41
Optical drive (device-dependent) . . ....................................................... 43
Handlingstoragemedia .............................................................. 43
Insertingor removingstorage media .................................................. 44
Manual removal of storage media (emergency removal) . . . ............................. 45
Wireless LAN / Bluetooth wireless components (device-dependent) ......................... 45
Switching the wireless components on and off . ........................................ 45
Settingsin BIOSSetupUtility ............................................................ 46
Startingthe BIOSSetup Utility ........................................................ 46
Operatingthe BIOSSetup Utility ...................................................... 47
Fujitsu 3
Contents
Shutting downthe BIOSSetup Utility ................................................. 47
Propertyand dataprotection ............................................................. 48
BIOSSetupsecurity functions ........................................................ 48
Deletedata ......................................................................... 48
Using the SmartCard reader (device-dependent) . . . . . .................................. 48
Using a palm sensor (device-dependent) . ............................................. 50
Usingthe securitylock ............................................................... 51
Usinga lockingslide ................................................................. 52
Lead-sealing thecasing .............................................................. 53
Troubleshootingandtips .............................................................. 54
Helpif problemsoccur ................................................................... 54
Troubleshooting . . ....................................................................... 54
Power-on indicatorremains unlitafteryouhave switchedon yourdevice ................. 54
The device cannot be switched off with the On/Off switch. .............................. 55
Monitorremainsblank ............................................................... 55
Nomousepointerdisplayedon themonitor ............................................ 56
Dateand timeare notcorrect ........................................................ 56
SmartCard reader is not recognised . ................................................. 56
SmartCard PINforgotten ............................................................. 56
SmartCard lost ...................................................................... 56
User and/or supervisor SmartCard lost . . . ............................................. 57
Errormessageson thescreen ........................................................ 57
Installingnewsoftware .................................................................. 57
Tips .................................................................................... 57
Systemexpansionsandrepairs ........................................................ 58
Technicaldata ......................................................................... 59
Index .................................................................................. 60
4Fujitsu
Your ESPRIMO
Your ESPRIMO
Summary
... is available with various configuration levels, which differ in terms of hardware and software
equipment. You can install additional drives (for example a DVD drive) and other boards.
This manual tells you how to start using your device and how to operate it in daily use.
This manual applies for all configuration levels. Depending on the configuration level
chosen some of the hardware components described may not be available on your
device. Please observe the notes on your Operating System.
Depending on the configuration selected, the operating system is pre-installed
on your hard disk (e.g. Windows).
Detailed information on this device is also provided:
• in the "Quick Start Guide" poster
• in the "Safety/regulations" manual
• in the "Warranty" manual
• in the BIOS manual for your device
• in the manual for "System expansions and repairs"
• in the operating manual for the monitor
• in the manual for the motherboard
• in your Operating System documentation
• in the document "Data deletion"
ValidityoftheReferenceManual
This Reference Manual is valid for the following systems:
• FUJITSU Desktop ESPRIMO Q556 (if applicable, followed by suffixes)
• FUJITSU Desktop ESPRIMO Q558
• FUJITSU Desktop ESPRIMO Q956
• FUJITSU Desktop ESPRIMO Q957
•FUJITSUD
esktop ESPRIMO Q958
• FUJITSU Desktop ESPRIMO Q7010
Fujitsu 5
Your ESPRIMO
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
these warnings could pose a risk to health, damage the device or lead
to loss of data. The warranty will be invalidated if the device becomes
defective through failure to observe these warnings.
Indicates important information for the proper use of the device.
►Indicates an activity that must be performed
Indicates a result
This font indicates data entered using the keyboard in a program dialogue or at
the command line, e.g. your password (Name123) or a command used to
start a program (start.exe)
This font indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This font indicates
• terms and texts used in a software interface, e.g.: Click on Save
• names of programs or files, e.g. Windows or setup.exe.
"This font" indicates
• cross-references to another section, e.g. "Safety information"
• cross-references to an external source, e.g. a web address: For more
information, go to "http://www.fujitsu.com/fts"
• Names of CDs, DVDs and titles or designations for other materials,
e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual
Key indicates a key on the keyboard, e.g: F10
This font indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the device
6Fujitsu
Ports and Operating Elements
Ports and Operating Elements
Ports
This chapter presents the individual hardware components of your device. This will provide
you with an overview of the ports and operating elements on the device. Please familiarise
yourself with these components before you start to work with the device.
Front
The device is available in several device variants:
• Device variant with optical drive
• Device variant with SmartCard reader and / or palm sensor
• Device variant with second hard disk
If you have not installed either an optical drive or a SmartCard reader / palm
sensor or a second hard disk, mount the blanking plate.
You can find information on modifying the device and on installing and removing
components in "the System expansions and repairs" manual.
Except for the FUJITSU Desktop ESPRIMO Q7010, each device variant
features a microphone connection and an audio output (item no. (1) and
(2) in the illustrations below) on the front side.
Here, the FUJITSU Desktop ESPRIMO Q7010 has instead a
combined audio input and output.
Fujitsu 7
Ports and Operating Elements
Device variant with the maximum of components
59
12 34 76 8
1 = Microphone jack (device-dependent)
2 = Audio output (device-dependent)
3 = USB port (USB 3.1, type A)
4 = USB port (USB 3.1, type A)
5 = Insert/eject button, optical drive (optional)
6 = USB port (USB 3.1, type C) (optional)
7 = Hard disk indicator
8 = On/Off switch with power-on indicator
9 = Emergency removal
8Fujitsu
Ports and Operating Elements
Device variant with SmartCard reader and / or palm sensor
8 91 2 3 4 5 76 10
1 = Microphone jack (device-dependent)
2 = Audio output (device-dependent)
3 = USB port (USB 3.1, type A)
4 = USB port (USB 3.1, type A)
5 = SmartCard reader (optional)
6 = USB port (USB 3.1, type C) (optional)
7 = SmartCard reader indicator (optional)
8 = Hard disk indicator
9 = On/Off switch with power-on indicator
10 = Palm sensor (optional)
Fujitsu 9
Ports and Operating Elements
Device variant with second hard disk
7 81 2 3 4 5 6 9
1 = Microphone jack (device-dependent)
2 = Audio output (device-dependent)
3 = USB port (USB 3.1, type A)
4 = USB port (USB 3.1, type A)
5 = Removing second hard disk (optional)
6 = USB port (USB 3.1, type C) (optional)
7 = Hard disk indicator
8 = On/Off switch with power-on indicator
9 = Hard disk indicator of second hard
disk (optional)
10 Fujitsu
Ports and Operating Elements
Rear
FUJITSU Desktop ESPRIMO Q556
5 6
14 13 12 10 9
1
711 8
3 42
1 = Latching clip (optional)
2 = Top casing cover unlocking mechanism
3 = Security lock device
4 = Padlock clamp
5 = LAN port
6 = PS/2 port
7 = Audio output
8 = 2 USB ports (USB 3.1)
9 = 2 USB ports (USB 2.0)
10 = Display port
11 = Bottom casing cover unlocking mechanism
12 = DVI-D monitor port
13 = Serial port
14 = Mains connection (AC IN)
Fujitsu 11
Ports and Operating Elements
FUJITSU Desktop ESPRIMO Q558
5
13 12 10
1
811 9
3 42 7
14
6
1 = Latching clip (optional)
2 = Top casing cover unlocking mechanism
3 = Security lock device
4 = Padlock clamp
5 = LAN port
6=4USBports(USB2.0)
7 = PS/2 port (optional)
8 = Audio output
9 = 2 USB ports (USB 3.1)
10 = Display ports
11 = Bottom casing cover unlocking mechanism
12 = DVI-D monitor port
13 = Serial interface (optional)
14 = Mains connection (AC IN)
12 Fujitsu
Ports and Operating Elements
FUJITSU Desktop ESPRIMO Q957/Q958
5
13 12 10
1
811 9
3 42 7
14
6
1 = Latching clip (optional)
2 = Top casing cover unlocking mechanism
3 = Security lock device
4 = Padlock clamp
5 = LAN port
6 = 2 USB ports (USB 2.0)
7 = PS/2 port (optional)
8 = Audio output
9 = 4 USB ports (USB 3.1)
10 = Display ports
11 = Bottom casing cover unlocking mechanism
12 = DVI-D monitor port
13 = Serial interface (optional)
14 = Mains connection (AC IN)
Fujitsu 13
Ports and Operating Elements
FUJITSU Desktop ESPRIMO Q7010
The FUJITSU Desktop ESPRIMO Q7010 can be optionally equipped with a Flexiboard
(item no. (12) in the illustration below): with one of the following connector types:
•VGA
•DVI-D
• HDMI
•LAN
• USB 2.0 (USB Type-C)
5
13 12 10
1
811 9
3 42 7
14
6
1 = Locking bracket (optional)
2 = Top casing cover unlocking mechanism
3 = Security Lock Device
4 = Padlock clamp
5 = LAN port
6=2USBports(USB2.0)
7 = USB port (USB 2.0, optional)
8 = Audio output
9 = 4 USB ports (USB 3.1)
10 = 2 Display ports
11 = Bottom casing cover unlocking mechanism
12 = Flexiboard type DVI-D (by way of
example, optional)
13 = Serial Interface (optional)
14 = Mains connection (AC IN)
14 Fujitsu
Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.
Safety notes
SafetynotesNote
Please follow the safety notes provided in the "Safety/Regulations" manual
as well as the safety notes given below.
When installing and operating the device, please observe the notes on
ambient conditions in Chapter "Technical data", Page 59 and Chapter "Getting
started", Page 17 or the notes in the data sheets.
The device may only be operated up to a maximum height of 3000 m
(9842 ft) (for China only 2000 m (6557 ft)).
When setting up the device, make sure there is clearance all around it so that
thecasingreceive
s enough ventilation. In order to avoid overheating, do not
cover the ventilation areas on the monitor or the device.
You should operate the device only if the rated voltage of the device
is the same as the local mains voltage.
For complete disconnection from the mains voltage, you must pull
the mains plug out of the socket.
Please note that components in the system as well as the surface
of the device may become very hot.
The activities described in these instructions must always be performed with special care.
Only qualified technicians should repair the device. Incorrect repairs could put the user
at great risk or cause serious damage to the equipment (electric shock, risk of fire).
Do not lay or place any objects on the upper side of the device.
Do not apply any pressure to the upper side of the device during operation.
Transporting the device
DeviceTran sporta tionRe-transportation
Transport all devices separately in their original packaging or in a packaging
that protects them from knocks and jolts.
Unpack them only at the installation site.
If the device is brought from a cold environment into the room where it will be used,
condensation may occur. In order to avoid damage to the device, wait before preparing
it for use until the device has reached the ambient temperature and it is absolutely dry.
Fujitsu 15
Important notes
Cleaning the device
Device,Tr anspor tationRetransportationSystemunit,see Device
Turn off all power and equipment switches and disconnect the power
plug from the mains outlet.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic (alcohol, thinner or acetone).
Never clean the device with water! Water entering into the device could
present a serious risk to users (e.g. electric shock).
Ensure that no liquid enters the system.
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been
moistened in mild domestic detergent and then carefully wrung out.
Use disinfectant wipes to clean the keyboard and the mouse.
Energy-saving, disposal and recycling
DisposalSavingenergyRecycling
You can findinformationonthesesubjectsinthe"Environment and Energy Information" manual
or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/").
Important notes for ESPRIMO Q957/Q958/Q7010
In an unlikely extreme situation (CPU completely utilised and many external USB devices
with high current consumption connected to the ESPRIMO Q95x/Q7010 simultaneously), the
internal CPU frequency can be reduced to prevent a current overload. The mouse, keyboard,
headphones and similar devices are low current consumers and are not affected.
As soon as the overload is ended, the CPU frequency returns to the normal value.
In the unlikely case of an extreme overload, the USB 3.1 port, type C, is deactivated and
a reset is carried out to limit the output level to 4.5 W (900 mA).
If an extreme system load occurs again, the USB 3.1 port, type C, will be permanently
deactivated. To prevent restricted performance or the deactivation of devices, the device
causing the overload must be stopped or the number of USB devices with high current
consumption and connected to the ESPRIMO must be reduced. .
The deactivated or throttled USB 3.1 port, type C, then automatically returns to full power
when the device is reconnected or the system is restarted.
16 Fujitsu
Getting started
Getting started
Gettingstarted
Please observe the safety information in the "Important notes", Page 15 chapter.
Unpacking and checking the delivery
It is recommended not to throw away the original packaging material! It may be
required for reshipment at some later date.
PackagingContentsofd eliveryPackaging,
►Unpack all the individual parts.
►Check the contents of the package for any visible damage caused during transport.
►Check whether the delivery conforms to the details in the delivery note.
►Should you discover that the delivery does not correspond to the delivery
note, notify your local sales outlet immediately.
Steps for initial setup
Preparingforfirs tuse,ove rviewPreparingforu se,
Only a few steps are necessary to put your new device into operation for the first time:
• Select a location for device and set up device
• Connect external devices such as mouse, keyboard and monitor
• Check the voltage at the mains outlet and connect the device to an electrical outlet
• Switch the device on
You will learn more about the individual steps in the following sections.
External devices
If you have received other external devices in addition to your own device (e.g.
a printer), do not connect these until after the initial installation. The following
sections describe how to connect these external devices.
Drives and boards
If you have received drives or boards as well as your device, please do not
install them until after first-time setup. Installation of drives and boards is
described in the "System expansions and repairs" manual.
Fujitsu 17
Getting started
Fitting the underside cover (device-dependent)
Rating type plate
FUJITSU Desktop ESPRIMO Q956/Q957:
At the time of device delivery, the bottom cover (2) is not yet mounted on the bottom
of the device, but packed along with the system so that you can read the type rating
plate (3) and the software licence information when preparing it for use.
The type rating plate and the software licence are affixed on the device cover and
is usually located below the mounted bottom cover so that it is not visible.
FUJITSU Desktop ESPRIMO Q55x/Q958/Q7010:
With the FUJITSU Desktop ESPRIMO Q55x/Q958/Q7010, the type
rating plate is attached to the underside of the device or to the right
side of the device (when used vertically).
FUJITSU Desktop ESPRIMO Q956/Q957:
Only fit the underside cover if you are using the device in a horizontal or
vertical operating position without attaching it to a VESA interface (see
Section "Setting up the device", Page 20 ).
If you are fitting the device onto the VESA interface of a monitor, you
must not fit the underside cover. If you do, the screw holes for the VESA
attachment will no longer be accessible.
21 31
Device with device cover (1), with bottom cover
mounted (2)
Device with device cover (1) and visible type
plate (3, ESPRIMO Q956/Q967 only), no bottom
cover.
The device has a device cover (1) at the bottom. The device cover is divided into two:
during operation, the bottom cover (2) is inserted in the device cover.
18 Fujitsu
Getting started
In order to be able to mount the bottom cover prior to preparing it for use, proceed as follows:
►Turn the device over and place it on a stable, flat and clean surface. If necessary, place a
slip-resistant cloth on this surface to prevent the device from being scratched.
1
1
2
►Put the bottom cover as shown on the bottom of the device.
►Hook the bottom cover in the openings provided for this purpose at the bottom (1).
►Fold the cover in the direction of the arrow (2) until it engages noticeably and audibly.
Information about removing the bottom cover is provided in Section "Remove
the bottom cover", Page 25 .
Fujitsu 19
Getting started
Setting up the device
VideoworkstationErgonomicDevice
When setting up your device, please read the recommendations and
safety notes in the "Safety/regulations" manual.
We recommend that you place your device on a surface with good anti-slip qualities.
In view of the multitude of different finishes and varnishes used on furniture, it is
possible that the rubber feet will mark the surface they stand on.
Depending on your device location, disturbing vibrations and noises may occur. In
order to avoid this, a minimum distance of 10 mm / 0.39 inch to other devices or
objects should be maintained on housing sides without ventilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
on the monitor or the device.
For ventilation surfaces, a minimum distance of 200 mm / 7.87 inch
from the device must be maintained.
Do not place multiple devices on one another and do not keep any monitor on the device.
Do not expose the device to extreme ambient conditions (see "Technical data", Page 59,
"Ambient conditions"). Protect the device from dust, humidity, and heat.
Operating position
You can use the device in various operating positions.
Horizontal, top casing cover upwards
For the device variant FUJITSU Desktop ESPRIMO Q55x/Q957/Q958/Q7010, you must
stick the enclosed adhesive feet in the four corners of the underside of the device in
this operating position, see section "Attach adhesive feet (optional)", Page 23.
20 Fujitsu
Getting started
Attach adhesive feet (optional)
For the horizontal operating position, you must attach the adhesive feet to the device.
1
1
1
1
►Attach the adhesive feet to the four corners of the underside of the unit as shown (1).
Fujitsu 23
Getting started
Fitting the base (optional)
Screw holes for attaching the base can only be found on the left side of the device.
1
2
2
1
3
4
4
3
►Place the device on the right side as shown.
The screw holes (1) and guide openings (2) for securing the base on the
left side of the device are facing upwards.
►Place the base on the left side of the device such that the locking lugs (3) are inserted into the
corresponding guide openings (2) on the device and the screw holes (1) and (4) directly overlap.
►Place the screws into the overlapping screw holes (1 & 4) and attached
the base to the device using the screws.
24 Fujitsu
Getting started
Fitting the device to the VESA interface on a monitor (optional)
With ESPRIMO Q956/957 type devices, the casing cover is already fitted
with the corresponding screw holes by default.
With ESPRIMO Q55x/Q958/Q7010 type devices, you can order the corresponding
casing cover with screw holes separately if necessary.
The device must be fitted onto the screen in such a way that the connecting
and operating elements can be used from the side.
Remove the bottom cover
• Instructions: The housing is open and the housing cover has been removed,
see "System expansions and repairs" manual.
1
1
2
►Release the locking lug (1) on the underside cover from the casing cover
and remove the underside cover (2).
Information about fixing the underside cover is provided in Section "Fitting the
underside cover (device-dependent)", Page 18.
Fujitsu 25
Getting started
Mounting with screws
1
1
1
1
a
►Mount the casing cover (a) into the bolts at the rear of the monitor using the screws (1) supplied.
26 Fujitsu
Getting started
►Secure the device on the casing cover mounted on the monitor.
Fujitsu 27
Getting started
Mounting with bolts and screws
1
1
1
1
►Screw in the four hexagon head bolts at the rear of the monitor (1).
28 Fujitsu
Getting started
1
1
1
1
a
►Install the casing cover (a) into the bolts at the rear of the monitor using the screws supplied (1).
Fujitsu 29
Getting started
►Secure the device on the casing cover mounted on the monitor.
Mounting on monitors with height-adjustable column
2
1
2
►Detach all cables from the monitor.
►Fix the monitor base adapter by laying the
Velcro tape around the monitor base (1) and
looping it back through the metal eye (2).
30 Fujitsu
Getting started
2
1
11
1
►Fix the casing cover onto the monitor base
adapter using the screws (1) supplied.
►Secure the device on the casing cover
mounted on the monitor.
Fujitsu 31
Getting started
Connecting the power cable
Preparingforo perationPowercable
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The supplied power cable conforms to the requirements of the country in
which you purchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
Use the following table to check which mains plug applies for your country. The
following illustration may be different from your country variant.
2
1
►Connect the power cable (1) to the power connector (AC IN) of the device.
►Connect the mains cable (2) to a mains socket.
32 Fujitsu
Getting started
Power connector Country
USA, Canada, Mexico, parts of South America,
Japan, Korea, the Philippines, Ta i w a n
Russia and the Commonwealth of Independent
States (CIS), large parts of Europe, parts of
South America, the Middle East, parts of Africa,
Hong Kong, India, large parts of South Asia,
UK, Ireland, Malaysia, Singapore, parts of Africa,
China, Australia and New Zealand
Fujitsu 33
Getting started
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always hold the plug of a cable when removing it. Never unplug a
cable by pulling the cable itself.
To ensure that your device works properly, use only the connection cable
supplied or use a high-quality connection cable.
Ports on the device
PortsExternaldevicesDevice
The ports are located on the front and back of the device. The ports available on your
device depend on the configuration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the connections is provided in the manual for the motherboard.
DVI-D monitor port, white
(device-dependent)
Monitorport
DP Display port
Serial port
Serialport
HDMI port (device-dependent)
USB 2.0 - Universal Serial
Bus, type A, black
UniversalSerialBus
LAN port
LANport
USB 3.1 Gen1 - Universal
Serial Bus, Type A: blue, Type
C: black
UniversalSerialBus
Audio input (Line in, device-dependent)
USB 3.1 Gen2 - Universal
Serial Bus, type A: blue, type
C: black
Audio output (Line Out,
device-dependent), light green
AudiooutputLineout
PS/2 keyboard port, purple
Keyboardport
Combined audio input and output
(device-dependent)
Some of the connected devices require special software (e.g. drivers) (refer to the
documentation for the connected device and Operating System).
34 Fujitsu
Getting started
Connecting the monitor
Connect the monitor to your device only if it is switched off.
►Follow the instructions contained in the monitor operating manual to prepare
the monitor (e.g. connecting cables).
Monitor
►Plug the data cable into the desired monitor port of the device.
►Plug the monitor power cable into the grounded mains outlet.
Connecting a USB mouse
►Connect the USB mouse to one of the USB ports on the device.
Connectinga USB mous eUSBport
Connecting a USB keyboard
Use the keyboard cable provided with the keyboard (not included in the delivery scope of the device).
USBportconnecting
►Plug the rectangular connector of the keyboard cable into the rectangular socket
on the underside or on the rear of the keyboard.
►Plug the flat rectangular USB connector of the keyboard cable into a USB port of the device.
USBport
Connecting external devices to the serial interface
SerialinterfaceSerialinterface,Externaldevices,Devices,
For an exact description of how to connect external devices to the corresponding
port, please see the external device documentation.
External devices (e.g. a printer or scanner ) can be connected to the serial port.
►Connect the data cable to the external device.
►Connect the data cable to the corresponding serial interface.
Port settings
Serialinterface,
You can change the settings of the port in the BIOS Setup.
Device drivers
Devicedrive rs,
The devices connected to the serial interface require drivers. Your operating system
already includes many drivers. If the required drive is missing, install it. The latest
drivers are usually available on the Internet or will be supplied on a data carrier.
Fujitsu 35
Getting started
Connecting external devices to the USB ports
USBdevicesUSBportExternaldevicesDevice s
You can connect a wide range of external devices to the USB ports (e.g.
printer, scanner, modem or keyboard).
USB devices and hot plug-enabled. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in the documentation for the USB devices.
►Connect the data cable to the external device.
►Connect the data cable to one of the USB ports on your device.
Device drivers
External USB devices which you connect to one of the USB ports don’t usually
need their own drivers because the software required is already included in
the Operating System. If the device requires separate software, please follow
the instructions in the manufacturer’s documentation.
Connecting a PS/2 device
Only use the supplied lead.
A PS/2 device is only recognised by the PC if you connect the PS/2 device
when the PC is switched off and then switched on again.
Connectinga PS/2d eviceconnecting
►Connect the PS/2 device to the PS/2 port on the PC.
►Switch the PC back on.
36 Fujitsu
Getting started
Initial switch-on: Software will be installed
InstallationSoftwareInstallation
Once the installation has been started the device must not be switched
off, unless the installation has been completed.
During the installation process, DO NOT restart the device unless
you are requested to do so!
Otherwise the installation will not be carried out correctly and the contents
of the hard disk will have to be completely restored.
If the device is integrated into a network, the user and server details as well as
the network protocol are required during the software installation.
Contact your network administrator if you have any questions about these settings.
When you switch on the device for the first time, the supplied software
is installed and configured. Plan a reasonable amount of time for this,
as this process must not be interrupted.
You may need the licence number for Windows during the installation. The licence number is
locatedonastick
er on your device (see "Remove the bottom cover", Page 25).
Switch on the monitor and the machine
In order to avoid overheating, do not cover the ventilation areas
on the monitor or the device.
►Switch on the monitor (see operating instructions for the monitor).
►Press the on/off button on the front of the machine.
The operational display will light up and the machine will start.
Fujitsu 37
Getting started
Installing the software
►During installation, follow the instructions on the screen.
SoftwareInstallation
►Consult the Operating System manual if there is anything unclear about the requested input data.
You will find detailed information on the system, as well as drivers, utilities and updates
on the "Drivers & Utilities" DVD and on the Internet at "http://www.fujitsu.com/fts/support".
38 Fujitsu
Operation
Operation
Switch the device on
►If necessary, switch the monitor on (see the operating manual for the monitor).
DeviceMonitor
►Press the ON/OFF switch on the front of the device.
The power indicator glows and the device is started.
Switching the device off
►Shut down the Operating System properly.
DeviceMonitor
►If the Operating System does not automatically switch the device into energy-saving
mode or switch it off, press the ON/OFF switch until the device switches off.
Warning, this could lead to a loss of data!
Ifthedeviceisswi
tched off, it consumes a minimum of energy.
The on/off switch does not disconnect the device from the mains voltage. To completely
disconnect the mains voltage, pull the power plug out of the power socket.
►If necessary, switch the monitor off (refer to the operating manual for the monitor).
Fujitsu 39
Operation
Indicators on the device
The indicators are on the front of the casing. Which indicators are available on your
device depends on the configuration level you have selected.
Example: Device variant with SmartCard reader and/or palm sensor
321
No. indicator Description
1SmartCard reader
indicator (device
dependent)
The indicator lights up when the device’s SmartCard reader is
accessed (device dependent).
2Harddiskindi
cator The indicator lights up when the hard disk drive in the device
is being accessed.
3 Power indicator Attention: In the energy saving mode, the device must not be
disconnected from the mains, as this can result in data loss.
• Indicator is illuminated:
The device is switched on.
• Indicatorflashes:
The device is in energy-saving mode. After being switched on
with the On/Off switch, the device powers up or returns to the
state it was in before it entered energy-saving mode.
• The indicator is not illuminated:
The device is switched off (disconnected from the mains) or
is ready. If the device is ready it can be switched on with the
On/Off switch.
In the energy saving mode, the device must not be disconnected from
the mains, as this can result in data loss.
40 Fujitsu
Operation
Keyboard
KeyboardKeyboardKeyboardKeyboardKeyboardKeyboardAlphan umeric keypadCursorkeysButtonsFunction keysNumer ickey padNumer ickey pad
The illustrated keyboard is an example and may differ from the model you use.
1 2
345
1 = Function keys
2 = Power button (optional)
3 = Alphanumeric keypad
4=Cursorkeys
5 = Numeric keypad (calculator keypad)
Important keys and key combinations
KeysKeycombinations
The description of the following keys and key combinations applies to Microsoft
operating systems. Details of other keys and key combinations can be found in the
documentation of the relevant application programme.
Key / key combination Description
On/Offswitch
Key
Power button (optional)
Depending on the setting in the BIOS Setup the device can be switched on
or off with this switch. Some operating systems allow you to configure
additional functions of the ON/OFF switch in the Control Panel.
With some keyboards the ON/OFF switch can only be used with an ACPI
(Advanced Configuration and Power Management Interface). Otherwise
the key is inoperative. The motherboard must support this function.
KeysKeysKeys
Enter key
Confirm the highlighted selection. The enter key is also referred to as
the "Return" key.
Fujitsu 41
Operation
Key / key combination Description
Keys
Windows key
The Windows key switches between the start screen and the last used
application.
Keys
Menu key
The Menu key opens the menu for the active application.
KeysKeys
Shift key
enables upper-case letters and the upper key symbols to be displayed.
TheShiftkeyisalsocal
led "Shift".
Keys
Alt Gr key (country-dependent)
produces a character shown on the bottom right of a key (e.g. the @
sign on the Qkey).
Keys
Num Lock key
By pressing the Num Lock key you switch between the upper- and
lower-case levels of the calculator keypad.
When the Num Lock indicator is lit the digit and comma keys are active.
When the Num Lock indicator is not lit the cursor control functions are
active in the Numeric keypad.
Ctrl
KeysKeysKeysKeys
Ctrl key
performs a special operation when pressed in conjunction with another
key. The Ctrl key is also called the "Control" or "Control key".
AltCtrl Del
++
Ctrl+Alt+DelCtrl+Alt+DelKey sKeyc ombinations
Windows Security/Task Manager
This key combination opens the Windows Security/Task Manager window.
42 Fujitsu
Operation
Optical drive (device-dependent)
Opticaldrive
Depending on the device variant, your device is fitted with an optical drive.
An optical drive on one side and a SmartCard reader/palm sensor on the
other cannot be combined with one another.
This product contains a light-emitting diode (LED), classified in accordance with IEC
60825-1:2007: LASER CLASS 1, and hence, it should not be opened.
Handling storage media
Storagemedia
Observe the following guidelines when handling storage media:
• Avoid touching the surface of any storage media. Handle storage media only by their edges.
• Always keep the storage media in its case. This will protect the storage media against
being covered in dust, scratched or damaged in any other way.
• Protect your storage media against dust, mechanical vibrations and direct sunlight.
• Avoid keeping storage media in areas subject to high temperatures or humidity.
You can use 12 cm diameter storage media in the drive. Do not use any
visiting card CDs or other small storage media.
When using a CD of poor quality vibrations and reading errors may occur.
Fujitsu 43
Operation
Inserting or removing storage media
►Press the Insert/Eject button to open the tray.
The drive tray will open.
1
2
►Place the storage media in the tray with
the printed side facing upwards.
or
►Remove any storage media
already in there.
If you press the Remove button while the storage media is being accessed
in the optical drive, the storage media is not output automatically. Wait until
the process has completed and try once again.
44 Fujitsu
Operation
Manual removal of storage media (emergency removal)
CD/DVDRemovingbyhand,CD/DVDEmergencyrem oval,CD/DVD
In the event of a power failure or damage to the drive it may be necessary
to manually remove the CD/DVD.
1
2
►Switch your device off.
►Push a pen or a piece of wire (such as a
paper clip) firmly into the opening (1).
The drive tray is ejected. You can now pull
the drive tray (2) out of the drive.
Wireless LAN / Bluetooth wireless components
(device-dependent)
The installation of wireless components not approved by Fujitsu will
invalidate the certifications issued for this device.
The operation of these wireless components is not permissible in Taiwan.
Switching the wireless components on and off
With the programme Device Manager you can switch off the wireless
components on or off separately.
Pay attention to the additional safety notes for devices with wireless components
provided in the "Safety/Regulations" manual.
Details on using Wireless LAN can be found in the online help system
included with the Wireless LAN software.
You can find more information on how to use Bluetooth on the CD you
received with your Bluetooth software.
Fujitsu 45
Operation
Settings in BIOS Setup Utility
BIOSSetupUtilitySystemsettings,BIOSSetupUtilityConfiguration,BIOSSetupUtilitySetupConfiguringthesystemConfiguringthehardware
With the help of the BIOS Setup Utility you can adjust the system functions
and the hardware configuration for your device.
When it is supplied, the device is set to factory default settings. You can change these
settings in BIOS Setup Utility. Any changes you make in the settings take effect as
soon as you save and shut down the BIOS Setup Utility.
The BIOS Setup Utility program contains the following menus:
Menu Description
Main System settings such as time and date
Advanced Advanced system settings
Boot Configuration of the start-up sequence
Power Power management functions
Security Password settings and security functions
Exit Exits the BIOS Setup Utility
The following function keys can also be used:
Key Description
Esc to shut down the BIOS Setup Utility
The current settings are not saved.
F7 To discard changes and to load the previous configuration of the BIOS
Setup Utility.
F9 To lo ad t he d efault configuration of the BIOS Setup Utility.
F10 to shut downtheBIOS Setup Utility
The current settings are saved.
Starting the BIOS Setup Utility
►Start the device (switch off/on or reboot the Operating System).
BIOSSetupUtility
Depending on the setting for Fast Boot in the BIOS Setup Utility the following display,
if applicable, appears on the screen on start-up:
<F2> BIOS Setup <F12> Boot Menu
►Press the function key F2 .
►If a password has been assigned, enter the password and press the Enter key.
If you have forgotten the password, contact your system administrator
or contact our customer service centre.
The BIOS Setup Utility starts.
46 Fujitsu
Operation
Operating the BIOS Setup Utility
BIOSSetupUtility
Press the F1 key to display help on the operation of the BIOS Setup Utility. The description
of the individual settings is shown in the right-hand window of the BIOS Setup Utility.
With the F9 key you can load the default settings of the BIOS Setup Utility.
►Use the cursor keys ←or →to select the menu in which you would like to configure settings.
The menu is displayed on the screen.
►Select the option that you want to change with the cursor keys ↑or ↓.
►Press the Enter key.
►Press the ESC key to exit the selected menu.
►For future reference, make a note of the changes you have made (e.g. in this manual).
Shutting down the BIOS Setup Utility
BIOSSetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes - save changes and exit BIOS Setup Utility
►To save the current menu settings and to shut down the BIOS Setup Utility,
select Exit Saving Changes and Yes.
The device is rebooted and the new settings come into effect.
Exit Discarding Changes - Reject changes and exit BIOS Setup Utility
►To discard the changes, select Exit Discarding Changes and Yes.
The settings which were in force when BIOS Setup Utility wascalledcontinuetoremain
effective. The BIOS Setup Utility is shut down and the device is rebooted.
Fujitsu 47
Operation
Property and data protection
Propertyprotectio nDataprotectionSecuritymeasure s
Software functions and mechanical locking offer a broad range of functions for protecting your device
and your personal data against theft and unauthorised access. You can also combine these functions.
BIOS Setup security functions
In the BIOS Setup the menu on Security offers you various options for protecting
your personal data from unauthorised access, e.g.:
• preventing unauthorised system access
• preventing opening the BIOS Setup without authorisation
Before using the various options of password protection for your data security
in the BIOS Setup Utility, please note the following:
Make a note of the passwords and keep them in a safe place. If you forget your
supervisor password, you will not be able to access your device. Deleting the password
is not covered by warranty and assistance for rectifying this will be charged separately.
Password prote ction
Your password can be up to 32 characters long and can contain letters and numbers.
No distinction is made between upper-case and lower-case.
Delete data
data
Erase Disk function for hard disks and solid state drives
EraseDiskDeleteSATAharddisk
Erase Disk is a solution integrated in the firmware of FUJITSU desktops (UEFI:Unified Extensible
Firmware Interface) to delete all data from a hard disk or Solid State Disc drives (SSDs).
With this function, all data from internal disks or SSDs can be irretrievably deleted before the
hard disks or the whole system are disposed of. The function can also be used if hard disks
are to be completely deleted, e.g. before installing a new operating system.
Further information on Erase Disk can be found on the Internet at
"http://support.ts.fujitsu.com/download".
Using the SmartCard reader (device-dependent)
SecurityfunctionsSecurityfunctions
Whether your device has a SmartCard reader depends on the
device variant you have ordered.
The SmartCard reader allows access to be limited to only those users that
have an appropriate SmartCard.
SmartCards are not supplied as standard equipment. You can use all SmartCards that comply with
the ISO standard 7816-1, -2 or -3. These SmartCards are available from various manufacturers.
48 Fujitsu
Operation
With the appropriate software you can use your SmartCard as an alternative to password protection,
but also as a digital signature, for encrypting your e-mails or for home banking.
We recommend that you always use two SmartCards. Always keep one of the SmartCards
in a safe place if you are carrying the other SmartCard with you.
In order to be able to take advantage of all the security features of your system, you
will need a CardOS SmartCard from Fujitsu Technology Solutions.
The SmartCard can only be used with a PIN so maximum protection is maintained
even when the SmartCard is lost. In order to maximise your security, the CardOS
SmartCard gets disabled if three incorrect attempts are made to enter the PIN.
When using your CardOS SmartCard for the first time, you have to enter the preset PIN
"12345678" or the PIN that has been informed to you by your system administrator.
Mounting the SmartCardreader
Fit the SmartCard sensor as described in the "System expansions and repairs" manual.
Inserting the SmartCard
Do not use force when inserting and removing the SmartCard.
Make sure that foreign objects do not fall into the SmartCard reader.
1
►Push the SmartCard into the SmartCard reader with the chip facing upwards.
Fujitsu 49
Operation
Using a palm sensor (device-dependent)
Whether your device has a palm sensor depends on the device variant you have ordered.
The palm sensor (1) can record the image of the pattern of the veins in the hand. This image
is evaluated by additional software and can be used instead of a password.
1
Mounting the palm sensor
Fit the palm vein sensor as described in the "System expansions and repairs" manual.
Using the palm sensor
►To be able to use the palm sensor, you must install and launch the software.
►Follow the instructions on the screen.
The surface of the hand must be positioned such that the palm of the hand
lies centrally over the palm sensor. In doing so, the palm of the hand and
slightly spread fingers should form an even surface.
The supplied software shows the precise position of the hand above the palm sensor.
50 Fujitsu
Operation
Using the security lock
The following illustration shows the FUJITSU Desktop ESPRIMO Q956/Q957
device variant. You will find the security lock device in the same position in the
FUJITSU Desktop ESPRIMO Q55x/Q958/Q7010 device variant.
Your device has provision for a security lock (1). Using the security lock device and
the Kensington Lock cable (steel cable, accessory) you can protect your device against
theft. Please consult the manual for your Kensington Lock.
1
►Attach the Kensington Lock cable to the Security Lock mechanism (1) on your device.
KensingtonLock cableUsingtheSecurityLockMechanicallockMechanicallockAnti-theftprotection
Fujitsu 51
Operation
Using a locking slide
• The upper housing cover is removed, see "System expansions and repairs" manual.
• The lower housing cover is removed, see "System expansions and repairs" manual.
You can also purchase a locking bracket for your device. Contact the service
desk or sales partner responsible for your country.
The following illustration shows the FUJITSU Desktop ESPRIMO Q956/Q957
device variant. You will find the components concerned in the same position in
the FUJITSU Desktop ESPRIMO Q55x/Q958/Q7010 device variant.
You can use the padlock clamp located on the device and the locking bracket to
protect your device from unauthorised opening.
1
1
►Pull the locking slide apart slightly (1).
Padlockclamp
Latchingclip
Mechanicalb ackup
Mechanicallock
2
2
3
3
►Insert the latching clip into the eyes (2) in the direction of the arrow (3).
52 Fujitsu
Operation
►Secure the lower housing cover again, see "System expansions and repairs" manual.
►Secure the upper housing cover again, see "System expansions and repairs" manual.
►Fold the locking latching clip fully to the right until it is lying against the rear of
the device and secure a padlock to the padlock clamp.
Alternatively you can use a Kensington Lock cable (see "Using the security lock", Page 51
). This will prevent unauthorised opening of the latching clip and, with it, the casing cover.
Lead-sealing the casing
To prevent unauthorised persons from opening the casing, the casing can be lead-sealed.
►Use the wire of the lead-seal to connect the locking bracket with the padlock clip
on the back of the device (see chapter "Rear", Page 11).
Lead-sealingLead-sealc hainLead- sealwireMechanicallock
►Use the seal to secure the lead-sealing chain or wire.
Fujitsu 53
Troubleshooting and tips
Troubleshooting and tips
Refer to the safety notes in the "Safety/regulations" manual and in the "Getting
started", Page 17 chapter when connecting or disconnecting cables.
If a fault occurs, try to correct it as described in the following documentation:
• in this chapter
• in the documentation for the connected devices
• in the help systems of thesoftwareused
• in the documentation for your operating system
Help if problems occur
Should you encounter a problem with your computer that you cannot resolve yourself:
►Note the Ident-No. of your device. The Ident-No can be found on the type rating plate on
the underside of the device (see "Fitting the underside cover (device-dependent)", Page 18).
If necessary, remove the type rating plate in order to access the Ident-No..
►Contact the Service Desk responsible for your country for clarification of the problem:
"http://support.ts.fujitsu.com/contact/servicedesk". When you do this, please have
ready the Ident-No. and serial number of your system.
Troubleshooting
Power-on indicator remains unlit after you have
switched on your device
Cause Troubleshooting
The mains voltage supply is faulty. ►Check whether the power cable is plugged
properly into the device and a grounded
mains outlet.
Internal power supply overloaded. ►Unplug the mains plug of the device from
the mains socket.
►Wait for about 3 minutes.
►Insert the power plug into a properly
grounded mains outlet again.
►Switch the device on.
54 Fujitsu
Troubleshooting and tips
The device cannot be switched off with the On/Off switch.
Cause Troubleshooting
System crash ►Press the On/Off switch for at least
4 seconds, until the device switches off.
Attention: Warning, this could lead to a loss of
data!
The Operating System is not shut-down properly
in the process. Error messages are therefore
possible the next time the system is booted.
Monitor remains blank
Cause Troubleshooting
Monitor is switched off. ►Switch the monitor on.
Power saving has been activated (screen is
blank)
►Press any key on the keyboard.
or
►Deactivate the screen saver. If
necessary, enter the appropriate
password.
Brightness control is set to dark ►Adjust the brightness control. For detailed
information, please refer to the operating
manual supplied with your monitor.
Power cable not connected ►Switch off the monitor and the device.
►Check that the monitor power cable is
properly connected to the monitor and to
a grounded mains outlet or to the monitor
socket of the device.
►Check that the device power cable is
properly plugged into the device and a
grounded mains outlet.
►Switch on the monitor and the device.
Monitor cable not connected ►Switch off the monitor and the device.
►Check that the monitor cable is properly
connected to the device and monitor.
►Switch on the monitor and the device.
Incorrect setting for the monitor ►Restart the system.
►Press the F8 key while the system is
booting.
►Start the system in Safe mode.
►Set the correct values for the connected
monitor as described in the operating
manual of your monitor.
Fujitsu 55
Troubleshooting and tips
No mouse pointer displayed on the monitor
Cause Troubleshooting
The mouse is not properly connected. ►Shut down the Operating System correctly.
►Switch the device off.
►Check that the mouse cable is properly
connected. If you are using an adapter or
extension lead for the mouse cable, check
the plug-in connection.
►Make sure that only one mouse is
connected.
►Switch the device on.
Date and time are not correct
Cause Troubleshooting
Date and time are set incorrectly. ►Set the correct time and date under the
Operating System you are using.
or
►In the BIOS Setup, set the date or time.
SmartCard reader is not recognised
Cause Troubleshooting
Chip card inserted incorrectly. ►Check whether you have inserted your
SmartCard into the SmartCard reader the
right way with the chip facing upwards.
►Check whether the SmartCard you are using
is supported. Your SmartCard must comply
with the ISO standard 7816-1, -2, -3 and -4.
SmartCard PIN forgotten
Cause Troubleshooting
PIN forgotten ►If you are working in a network, contact your
system administrator, who can unlock your
system with a Supervisor PIN.
SmartCard lost
Cause Troubleshooting
SmartCard lost ►If you are working in a network, contact your
system administrator, who can boot your
system with a Supervisor SmartCard.
56 Fujitsu
Troubleshooting and tips
User and/or supervisor SmartCard lost
Cause Troubleshooting
User and/or supervisor SmartCard lost. ►If you have lost your User SmartCard, you
can continue working with the Supervisor
SmartCard and initialise a new User
SmartCard or deactivate the SystemLock
function.
►If you have lost the Supervisor SmartCard,
you can also continue working, but you no
longer have all rights and cannot initialise
another Supervisor-SmartCard.
►If you have lost both SmartCards, you
cannot boot your system. Please contact
our Service Desk. You must provide proof of
ownership for the device. Then the Service
Desk will refer you to our service partner,
who will unlock your device (for a charge).
Error messages on the screen
Error messages and their explanations are provided:
• in the technical manual for the mainboard
• in the documentation for the programs used
Installing new software
When installing programs or drivers, important files may be overwritten and modified. To
be able to access the original data in the event of any problems following installation,
you should backup your hard disk prior to installation.
Tips
Topic Tip
Outofsystemresources ►Close unnecessary applications.
or
►Run the applications in a different order.
Fujitsu 57
System expansions and repairs
System expansions and repairs
Upgrades,Device,System expansionComponentsServicing
Information on system expansions and repairs can be found on the Internet in the
"System Expansions and Repairs" manual at "http://www.fujitsu.com/fts/support".
Operations that are distinguished in the manual as Only For Service, such
as repairs to the device, may only however be performed by authorised
service technicians. Incorrect repairs may greatly endanger the user (electric
shock, fire risk) and will invalidate your warranty.
58 Fujitsu
Technical data
Technical data
Electrical data
Protection class: II
Rated voltage range 100 – 240 V
Rated frequency 50 – 60 Hz (AC)
Max. rated current 1.5 – 0.8 A
Dimensions
Width/depth/height: ESPRIMO Q956/Q957:
186 mm x 191 mm x 59 mm /
7.32” x 7.49” x 2.30”
ESPRIMO Q55x/Q958/Q7010:
185 mm x 190 mm x 54 mm /
7.28” x 7.48” x 2.13”
Weight
in basic configuration: approx. 1.8 kg / 4.0 lbs
Ambient conditions
Environment class: 3K2
Environment class: 2K2
DIN EN 60721-3-3
DIN EN 60721-3-2
Temperature
Operation (3K2) 15 °C .... 35 °C / 59 °F ... 95 °F
Transport (2K2) –25 °C .... 60 °C / –13 °F ... 140 °F
The formation of condensation is not permitted while the device is in operation!
Supply areas and clearances required to ensure adequate ventilation:
without air vents
with air vents
min. 10 mm / 0.39 inch
min. 200 mm / 7.87 inches (exception: underside
in vertical operating position, refer to "Setting up
the device", Page 20 )
Maximum permissible operating height 3000 m (9842 ft), for China only 2000 m (6557 ft)
The data sheets of these devices provide detailed technical data. The data sheets
are available on the Internet at "http://www.fujitsu.com/fts/".
Fujitsu 59
Index
Index
A
Alphanumeric keypad 41
Anti-theft protection 51
Audio output 34
B
BIOS Setup Utility
calling 46
operating 47
Settings 46
Shutting down 47
Buttons
Cursor keys 41
C
CD/DVD
Emergency removal 45
Components
installing/removing 58
Configuration, BIOS Setup Utility 46
Configuring the hardware 46
Configuring the system 46
connecting
Connecting a PS/2 device 36
USB keyboard 35
Connecting a PS/2 device 36
Connecting a USB mouse 35
Contents of delivery 17
Ctrl+Alt+Del 42
Cursor keys 41
D
data
delete 48
Data protection 48
Delete SATA hard disk 48
Device
Ports 34
set up 20
switching off 39
Switching on 39
transporting 15
Device drivers,
serial interface 35
Device,
transporting 16
upgrades 58
Devices
connecting 36
Devices,
connecting 35
Disposal 16
E
Emergency removal, CD/DVD 45
Erase Disk 48
Ergonomic
Video workstation 20
External devices
connecting 36
Ports 34
External devices,
connecting 35
F
Function keys 41
G
Getting started 17
I
Important notes 15
Installation
Software 37–38
Switchingonforthefirst time 37
K
Kensington Lock cable 51
Key
On/Off switch 41
Key combinations 41–42
Keyboard 41
Alphanumeric keypad 41
Cursor keys 41
Function keys 41
Numeric keypad 41
Keyboard port 34
60 Fujitsu
Index
Keys 41
Alt Gr 42
Control 42
Control key 42
Ctrl 42
Ctrl key 42
Ctrl+Alt+Del 42
Enter 41
Enter key 41
Menu key 42
Num 42
Return 41
Shift 42
Shift key 42
L
LAN port 34
Latching clip 52
Lead-seal chain 53
Lead-seal wire 53
Lead-sealing 53
Line out 34
M
Mechanical backup
Latching clip 52
Mechanical lock
Kensington Lock cable 51
Lead-sealing 53
Padlock clamp 52
Security Lock 51
Monitor
connecting 35
switching off 39
Switching on 39
Monitor port
DVI-D 34
N
Note
Safety 15
Notes
important 15
Numeric keypad 41
O
On/Off switch 41
Optical drive 43
P
Packaging 17
Packaging,
unpacking 17
Padlock clamp 52
Password protection 48
Ports 7, 34
Power cable
connecting 32
Preparing for first use, overview 17
Preparing for operation 32
Preparing for use,
overview 17
Property protection 48
R
Re-transportation 15
Recycling 16
Removing by hand, CD/DVD 45
Retransportation 16
S
Safety notes 15
Saving energy 16
Security functions
SmartCard 48
SystemLock 48
Security measures 48
Serial interface 35
Serial interface,
connecting devices 35
settings 35
Serial port 34
Servicing 58
Setup
Refer to the BIOS Setup Utility 46
Software
Installation 37–38
Storage media
Handling 43
Summary
Device 5
System expansion 58
System settings, BIOS Setup Utility 46
System unit, see Device 16
T
Transportation 15–16
U
Universal Serial Bus 34
Upgrades,
device 58
Fujitsu 61
