Table of Contents
- STYLISTIC Q702
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching off the Tablet PC
- Handwriting recognition under Windows 7
- Touchscreen
- Select display orientation (portrait or landscape orientation)
- Using fingers
- Using the stylus pen
- Tablet buttons
- Webcam
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card
- Wireless LAN / Bluetooth / UMTS / LTE radio components
- Ethernet and LAN (only with Keyboard Docking)
- GPS
- Keyboard Docking (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Help if problems occur
- Using the battery reset button
- The Tablet PC’s date or time is incorrect
- Battery indicator does not illuminate
- The Tablet PC’s touchscreen remains dark
- The display on the Tablet PC’s touchscreen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The radio connection to a network does not work
- The battery discharges too quickly
- Acoustic warnings
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Fujitsu Q702 User Manual
Displayed below is the user manual for Q702 by Fujitsu which is a product in the Tablets category. This manual has pages.
Related Manuals
System
Operating manual
STYLISTIC Q702
Congratulations on your purchase of an innovative
product from Fujitsu.
The latest information about our products, tips, updates etc. can be found
on the Internet at: "http://www.fujitsu.com/fts/"
For automatic driver updates, go to: "http://support.ts.fujitsu.com/download"
Should you have any technical questions, please contact:
• our Hotline/Service Desk (see the Service Desk list or visit:
"http://support.ts.fujitsu.com/contact/servicedesk")
• Your sales partner
• Your sales office
We hope you enjoy working with your new Fujitsu system!
STYLISTIC Q702
Operating manual
Innovative technology 7
Ports and controls 9
Important notes 13
First-time setup of your device 17
WorkingwiththeTabletPC 20
Security functions 53
Connecting external devices 58
Settings in BIOS Setup Utility 63
Troubleshooting and tips 65
Technical data 72
Manufacturer’s notes 76
Index 84
Remarks
Information on the product description meets the design specifications of Fujitsu and
is provided for comparison purposes. Several factors may cause the actual results to
differ. Technical data is subject to change without prior notification. Fujitsu rejects any
responsibility with regard to technical or editorial mistakes or omissions.
Trademarks
Fujitsu, the Fujitsu logo are registered trademarks of Fujitsu Limited or its subsidiaries
in the United States and other countries.
Microsoft and Windows are trademarks or registered trademarks of the Microsoft
Corporation in the United States and/or other countries.
Manufactured under license from DTS Licensing Limited. DTS and the symbol
are registered trademarks & DTS Boost is a trademark of DTS, Inc. Product
contains software. © DTS, Inc. All rights reserved.
All other trademarks specified here are the property of their respective owners.
Copyright
No part of this publication may be copied, reproduced or translated without
the prior written consent of Fujitsu.
No part of this publication may be saved or transferred by any electronic means
without the written approval of Fujitsu.
Contents
Contents
Innovativetechnology ................................................................. 7
Furtherinformation ...................................................................... 7
Notational conventions .................................................................. 8
Portsandcontrols ..................................................................... 9
Importantnotes ........................................................................ 13
Safetynotes ............................................................................ 13
Additional safety notes for devices with radio components . . . . . ............................. 13
Protecting thedisplay screen ............................................................ 14
Energysaving .......................................................................... 14
Energy saving under Windows ....................................................... 14
Travelling withyourTabletPC ............................................................ 15
Beforeyoutravel ................................................................... 15
TransportingtheTabletPC ........................................................... 15
CleaningtheTabletPC .................................................................. 16
First-time setup ofyourdevice ......................................................... 17
Unpacking and checking the device ...................................................... 17
Selectingalocat
ion ..................................................................... 18
Mains adapter connecting . . . . ........................................................... 18
Switchingonthedevice for the firsttime .................................................. 19
WorkingwiththeTabletPC ............................................................ 20
Statusindicators ........................................................................ 20
Switching on the TabletPC .............................................................. 22
Programming theON/OFFswitch ..................................................... 22
Switching offtheTabletPC .............................................................. 23
Handwriting recognition under Windows 7 . . . . . ............................................ 23
Touchscreen ............................................................................ 24
Selectdisplay orientation(portrait or landscape orientation) ................................. 25
Using fingers . .......................................................................... 25
Calibrate the Dual Digitizer for finger-based operation of the device ..................... 25
Actions with one finger . . . . ........................................................... 26
Actions with two fingers . . . ........................................................... 27
Usingthestylus pen .................................................................... 29
Settingthe pen ...................................................................... 30
Calibratingthepen .................................................................. 31
Replacing the pentip ................................................................ 31
Removingthe pen battery ............................................................ 32
Installingapenbattery ............................................................... 32
Installingapencord ................................................................. 32
Tabletbuttons .......................................................................... 33
Webcam ............................................................................... 35
Rechargeablebattery ................................................................... 36
Charging, caringforand maintainingthebattery ....................................... 36
Usingthepower-management features ................................................... 37
Memory cards .......................................................................... 38
Supported format . . .................................................................. 38
Inserting thememorycard ........................................................... 38
Removingthe memory card .......................................................... 39
SIM card ............................................................................... 39
3
Contents
Inserting the SIM card ............................................................... 40
RemovingaSIMcard ............................................................... 41
Wireless LAN / Bluetooth / UMTS / LTE radio components . . . .............................. 42
Switching the wireless components on and off ......................................... 42
SettingupWLANaccess ............................................................ 43
AccessviaUMTS/LTE .............................................................. 43
Ethernet and LAN (only with Keyboard Docking) . . ......................................... 44
GPS ................................................................................... 44
Keyboard Docking (optional) . ............................................................ 44
Ports on the Keyboard Docking . . . . . . ................................................. 45
Connecting the Tablet PC to the Keyboard Docking . . .................................. 46
Disconnecting the Tablet PC from the Keyboard Docking . .............................. 48
RemovablebatteryoftheKeyboardDocking .......................................... 49
Securityfunctions ..................................................................... 53
Configuring the fingerprint sensor ........................................................ 53
Configuringpassword protectioninBIOSSetup Utility ...................................... 54
Protecting BIOS Setup Utility (supervisor and user password) . .......................... 54
Password protection for booting of the operating system . .............................. 55
Passwordprotection for theharddisk ................................................. 56
Trusted Platform Module (TPM) (device-dependent) . . . . . .................................. 57
EnablingTPM ....................................................................... 57
Disabling TPM ...................................................................... 57
Connectingexternaldevices ........................................................... 58
Connecting an external monitor . . ........................................................ 59
HDMI port .......................................................................... 59
Connecting an external monitor (Keyboard Docking only) . .................................. 60
Connecting USB devices ................................................................ 61
Howto removeUSBdevices correctly ................................................ 61
Headphone port . ....................................................................... 62
Microphone port . ....................................................................... 62
Settings in BIOS Setup Utility . . ........................................................ 63
Starting the BIOS SetupUtility ........................................................... 63
Operating BIOS SetupUtility ............................................................. 63
ExitingBIOS SetupUtility ................................................................ 64
Exit Saving Changes - save changes and exit BIOS Setup Utility . . . . ................... 64
Exit Discarding Changes – Discard changes and exit BIOS Setup Utility . . ............... 64
Load Setup Defaults – Copy Standard Entries ......................................... 64
Discard Changes – Discard changes without exiting the BIOS Setup Utility ............... 64
Save Changes - save changes without exiting the BIOS Setup Utility . ................... 64
Save Changes and Power Off ........................................................ 64
Troubleshootingandtips .............................................................. 65
Help if problems occur ................................................................... 65
Usingthebatteryresetbutton ............................................................ 66
The TabletPC’sdateortime is incorrect .................................................. 66
Batteryindicatordoes not illuminate ...................................................... 66
The TabletPC’stouchscreenremainsdark ................................................ 66
The display on the Tablet PC’s touchscreen is difficult to read ............................... 67
The externalmonitorremainsblank ...................................................... 67
The externalmonitorisblank ortheimageisunstable ..................................... 67
The cursordoesnotcorrectly followthe pen movements ................................... 68
4
Contents
Peninputnotworking ................................................................... 68
The TabletPCdoesnotstartafter switchon ............................................... 68
The TabletPCstops working ............................................................. 69
The printer does not print . . . . . ........................................................... 69
The radio connection to a network does not work . . ........................................ 69
The batterydischargestoo quickly ........................................................ 70
Acousticwarnings ....................................................................... 70
Errormessages on the screen ........................................................... 70
Technicaldata ......................................................................... 72
TabletPC .............................................................................. 72
Rechargeablebattery ................................................................... 74
Mains adapter (60 W) . .................................................................. 74
Keyboard Docking (optional) . . ........................................................... 74
Rechargeable battery on Keyboard Docking . . . ............................................ 75
Manufacturer’snotes .................................................................. 76
Disposalandrecycling .................................................................. 76
DeclarationsofConformity ............................................................... 76
CEmarking ............................................................................ 76
Regulatory notices ...................................................................... 77
Regulatory information for Tablet PCs without radio device . ............................. 77
DOC (Industry CANADA)notices ..................................................... 79
FCC Regulatory information for Tablet PCs with radio device . . . ......................... 82
Index .................................................................................. 84
5
Contents
6
Innovative technology
Innovative technology
... and ergonomic design make your device a reliable and convenient companion.
The device boots very quickly, is ready for immediate use and offers a particularly
long operating time because of its high capacity battery.
The user-friendly "BIOS Setup Utility" offers powerful password protection functions which can be
used to control your Tablet PC’s hardware and protect your system better against unauthorised use.
Information on the connections and controls for your Tablet PC can be
found in chapter "Ports and controls", Page 9.
Further information
The Windows drivers for your device can be found on our Internet site.
The factory installation of your device does not support any other operating
system. Fujitsu Technology Solutions accepts no liability whatsoever
if any other operating system is used.
Software oriented components of these instructions refer to Microsoft products,
if they come within the scope of the delivery.
If you install other software products, pay attention to the operating
instructions of the manufacturer.
7
Innovative technology
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
these warnings could pose a risk to health, damage the device or lead
to loss of data. The warranty will be invalidated if the device becomes
defective through failure to observe these warnings.
Indicates important information for the proper use of the device.
►Indicates an activity that must be performed
Indicates a result
This font indicates data entered using the keyboard in a program dialogue or at
the command line, e.g. your password (Name123) or a command used to
start a program (start.exe)
This font indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This font indicates
• terms and texts used in a software interface, e.g.: Click on Save
• names of programs or files, e.g. Windows or setup.exe.
"This font" indicates
• cross-references to another section, e.g. "Safety information"
• cross-references to an external source, e.g. a web address: For more
information, go to "http://www.fujitsu.com/fts/"
• Names of CDs, DVDs and titles or designations for other materials,
e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual
Key indicates a key on the keyboard, e.g: F10
This font indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the device
8
Ports and controls
Ports and controls
This chapter presents the individual hardware components of your device. It gives you
an overview of the device’s indicators and connections. Please familiarise yourself with
these components before you start to work with the device.
Front
1
2
3
4
6
5
1 = Proximity sensor
2 = WebCam
3 = WebCam LED
4 = Microphone
5 = Status indicators
6 = Windows button
9
Ports and controls
Left side
1 2 3
1 = USB port (USB 3.0)
2 = Memory card slot
3 = DC input connector (DC IN)
10
Ports and controls
Right side
1 2 3 4 5 6 8
7
1=USBport(USB2
.0)
2 = HDMI port
3 = ON/OFF switch
4 = ON/OFF switch for wireless components
5 = Fixing port for pen holder (optional)
6 = Microphone port
7 = Headphone port
8 = Eyelet for pen cord
11
Ports and controls
Rear
1
2
4
4
5
5
7
6
3
1 = WebCam
2 = Fingerprint sensor
3 = Battery reset button
4 = Loudspeaker
5 = Mechanical clip for Keyboard Docking
6 = Port for Keyboard Docking
7 = SIM card slot (below cover)
12
Important notes
Important notes
ImportantnotesNotes
This chapter contains essential safety information which must be followed when working
with your Tablet PC. The other notes provide useful information on your Tablet PC.
Safety notes
SafetynotesNotes
Please follow the safety notes provided in the "Safety/Regulations" manual
as well as the safety notes given below.
Please pay special attention to the sections in the manual marked
with the symbol on the left.
When connecting and disconnecting cables, observe the relevant
notes in this operating manual.
Read the information on the ambient conditions in the "Technical data", Page 72chapter
and the "First-time setup of your device", Page 17chapter before preparing your
Tablet PC for use and switching it on for the first time.
When cleaning the device, please observe the relevant notes in the
section "Cleaning the Tablet PC", Page 16.
Pay attention to the additional safety notes for devices with radio components
provided in the "Safety/Regulations" manual.
This Tablet PC complies with the relevant safety regulations for data processing equipment.
If you have questions as to whether you can set up the Tablet PC in the intended
environment, please contact your sales point or our hotline/help desk.
Additional safety notes for devices with
radio components
Radiocomponent :WirelessLAN:Bluetooth,safetynotes
If a radio component (Wireless LAN/ Bluetooth) is integrated in your Tablet PC, you must be
sure to observe the following safety precautions when using your Tablet PC:
• Switch off the radio components when you are in an aircraft or driving in a car.
• Switch off the radio components when you are in a hospital, an operating room or near a medical
electronics system. The transmitted radio waves can impair the operation of medical devices.
• Switch off the radio components when you let the device get near flammable
gases or into hazardous environments (e.g. petrol station, paintshops), as the
transmitted radio waves can cause an explosion or a fire.
For information on how to switch radio components on and off, see chapter
"Switching the wireless components on and off", Page 42.
13
Important notes
Protecting the display screen
The device is not waterproof. Do not pour liquids on the system or wash it with a heavily
soaked cloth. Do not place items on the top of the display, or damage may occur.
During normal use of the device, small particles from the environment
can become embedded in the pen tip and scratch the screen. The
warranty does not cover a scratched screen.
Energy saving
NotesEnergyEnergysaving
If you will not be using your Tablet PC, switch it off. Switch off any connected external devices
when they are not in use. If you use the energy saving functions, the Tablet PC uses less
power. You will then be able to work for longer before having to recharge the battery.
Energy efficiency is increased and the environmental impact is reduced.
You save money while protecting the environment.
Energy saving under Windows
►Make use of the power management features (see "Using the power-management features",
Page 37).
14
Important notes
Travelling with your Tablet PC
MobileoperationNotesTransp ortatio nTabletPC
Please observe the points listed below when travelling with your Tablet PC.
Before you travel
►Back up important data stored on your hard disk.
Tab l e t P CTravel,TabletPC
►Switch off the radio component for data security reasons. With data traffic via a wireless
connection, it is also possible for unauthorised third parties to receive data.
Information on activating data encryption is provided in the documentation
for your radio component.
►If you want to use your Tablet PC during a flight, first check with the flight
attendants whether this is permissible.
When travelling in other countries
►If you are travelling abroad, check that the mains adapter can be operated with the
local mains voltage. If this is not the case, obtain the appropriate mains adapter
for your Tablet PC. Do not use any other voltage converter!
►Check whether the local mains voltage and the power cable are compatible. If this is
not the case, buy a power cable that matches the local conditions.
►Enquire with the corresponding government office of the country you will be
travelling in as to whether you may operate the radio component integrated in
your Tablet PC there (also see "CE marking", Page 76).
TransportingtheTabletPC
Protect the Tablet PC from severe shocks and extreme temperatures
(e.g., direct sunlight in a car).
►Switch off the Tablet PC.
►Unplug the mains adapter and all external devices from the power socket.
►Disconnect the mains adapter cable and the data cables for all external devices.
►To protect against damaging jolts and bumps, use a Tablet PC carrying
case to transport your Tablet PC.
15
Important notes
Cleaning the Tablet PC
Do not clean any interior parts yourself; leave this job to a service technician.
Only use cleaning products designed for computers. Normal household
cleaners and polishes can damage the markings on the keyboard and the
Tablet, the paintwork or the Tablet PC itself.
Please ensure that no liquid enters the Tablet PC.
The touchscreen is very sensitive to scratches! Only clean the display
surface with a very soft, slightly damp cloth.
►Switch the Tablet PC off.
CleaningNotesTa b l e t P CKeyboardTouchpadTouchscr eenCr ystalView display
►To prevent accidental activation of the device, disconnect the power plug
of the mains adapter from the socket.
The casing surfaces may be cleaned with a dry cloth. If particularly dirty, use a damp cloth that
has been dipped in water mixed with mild domestic detergent and then carefully wrung out.
16
First-time setup of your device
First-time setup of your device
First- timese tupGettingstarted
Please read the chapter "Important notes", Page 13.
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied software are already pre-installed.
Beforeyouswitchonthedeviceforthefirst time, connect it to the mains voltage
using the mains adapter, see "Mains adapter connecting", Page 18.Themains
adapter must be connected during the entire installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
The battery must be charged if you want to operate your device using the battery.
When used on the move, the built-in battery provides the device with the necessary power. You
can increase the operating time by using the available energy-saving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to your
device, please refer to the operating manual for your device.
Unpacking and checking the device
Should you discover any damage that occurred during transportation,
notify your local sales outlet immediately!
►Unpack all the individual parts.
PackagingTransport
►Check your device for any visible damage which may have occurred during transportation.
You may need the packaging in the future, if you need to transport your device.
17
First-time setup of your device
Selecting a location
SelectingalocationDeviceMains adapter
Select a suitable location for the device before setting it up. Follow
the instructions below when doing so:
• Never place the device or the mains adapter on a heat-sensitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause overheating and damage.
• The underside of the device heats up during normal operation. Prolonged contact
with the skin may become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep other objects at least 100 mm away from the device and its
mains adapter to ensure adequate ventilation.
• Never cover the ventilation slots of the device.
• Do not expose the device to extreme environmental conditions. Protect
the device from dust, humidity, and heat.
Mains adapter connecting
Preparingforo perationMainsadapter
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The supplied power cable conforms to the requirements of the country in
which you purchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
When the mains adapter is connected, you may feel a slight tingling when you touch
the top of the aluminium casing. The combination of a mains adapter without earth
and metallic casing components causes a very slight electric current.
This effect is harmless. The device meets all the relevant safety standards.
3
1
2
►Connect the power cable (1) to the
mains adapter.
►Plug the mains cable (2) into a mains outlet.
►Connect the mains adapter cable (3) to
the DC jack (DC IN) of the device.
18
First-time setup of your device
Switching on the device for the first time
Switchingonforthefirstt ime
On devices with ON/OFF switch for wireless components: Slide the ON/OFF switch
for wireless components to the ON position before switching on the device.
When you switch on the device for the first time, the supplied software is
installed and configured. Because this procedure must not be interrupted,
you should set aside enough time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use your device for the first time, the operating system
is pre-installed on the hard disk.
1
2
►Slide the ON/OFF switch (1) to the right to switch on the Tablet PC.
The ON/OFF switch returns automatically to its original position.
The power-on indicator (2) lights up whenever the system is switched on.
►During installation, follow the instructions on screen.
If a Windows operating system is installed on your device, you will find more
information on the system and drivers, help programmes, updates, manuals etc.
on the device or on the Internet at "http://www.fujitsu.com/fts/support/".
19
Working with the Tablet PC
Working with the Tablet PC
TabletPC,operationTabletPC
This chapter describes the basics for operating your Tablet PC. You can find instructions
on how to connect external devices (e.g. mouse, flash memory) to the Tablet PC
in the chapter "Connecting external devices", Page 58.
Please refer to the notes in "Important notes", Page 13.
Status indicators
StatusindicatorsSymbols
The status indicators provide information about the status of the power supply,
the drives and the keyboard functions etc.
20
Working with the Tablet PC
Status displays Description
Power-on indicator
• The indicator lights up blue: The Tablet PC is switched on.
• Indicator flashes: The Tablet PC is in sleep mode (Save-to-RAM).
• The indicator is not illuminated: The Tablet PC is switched off or in
Save-to-Disk mode.
Battery charging indicator
• The indicator lights up green: The mains adapter is connected.
• The indicator lights up orange: The battery is being charged.
•Theindicatorflashes red: The battery has a charge error.
• The indicator is not illuminated: The mains adapter is disconnected.
Battery indicator
The battery indicator shows the state of charge of the installed battery.
• The indicator lights up green: The battery is fully charged.
• The indicator lights up orange: The battery is partially charged.
• The indicator lights up red: The battery is nearly discharged.
• The indicator is not illuminated: The Tablet PC is switched off or in
Save-to-Disk mode.
Drive indicator
• The indicator lights up green: The hard disk drive is being accessed.
21
Working with the Tablet PC
Switching on the Tablet PC
TabletPC:switchingonPower-onindicatorSuspend/Resumebu tton
1
2
►Slide the ON/OFF switch (1) to the right to switch on the Tablet PC.
The ON/OFF switch returns automatically to its original position.
The power-on indicator (2) lights up whenever the system is switched on.
Programming the ON/OFF switch
You can program the ON/OFF switch:
Operating system Menu
Windows 7Start - (Settings) - Control Panel - System and
Security - Power Options
If you have assigned a password, you must enter this when requested to
do so, in order to start the operating system. Detailed information can be
found in the chapter "Security functions", Page 53.
22
Working with the Tablet PC
Switching off the Tablet PC
TabletPC
►Close all applications and then shut down the operating system (please
see the "Operating System Manual").
►Slide the ON/OFF switch towards the right.
The ON/OFF switch returns automatically to its original position.
Handwriting recognition under Windows 7
Handwriting recognition under Windows 7 currently supports the following languages:
English, German, French, Italian, Japanese, Korean, Chinese (traditional and simplified), Dutch,
Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish,
Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian.
23
Working with the Tablet PC
Touchscreen
Tou ch s c re e nNotes
High-quality TFT displays are installed in Tablet PCs from Fujitsu Technology Solutions GmbH. For
technical reasons, TFT monitors are manufactured for a specific resolution. An optimal, clear
picture can only be ensured with the correct resolution intended for the relevant TFT monitor. A
monitor resolution which differs from the specification can result in an unclear picture.
The screen resolution of your Tablet PC’s touchscreen is optimally set at the factory.
The standard of production techniques today cannot guarantee an absolutely fault-free screen
display. A few isolated constant lit or unlit pixels (picture elements) may be present. The maximum
permitted number of pixels faults is stipulated in the international standard ISO 9241-3 (Class II).
Example:
A monitor with a resolution of 1280 x 800 has 1280 x 800 = 1024000 pixels. Each pixel consists of
three subpixels (red, green and blue), so there are almost 3 million subpixels in total. According to
ISO 9241-3 (class II), a maximum of 2 light and 2 dark pixels and an additional 5 light or 10 dark
subpixels or a corresponding mix may be defective (1 light subpixel counts as 2 dark subpixels).
Pixel A pixel consists of 3 subpixels, normally red, green and
blue. A pixel is the smallest element that can be generated
by complete functionality of the display.
Subpixel A subpixel is a separately addressable internal structure
within a pixel that enhances the pixel function.
Cluster A cluster contains two or more defective pixels or
subpixels in a 5 x 5 pixel block.
Background lighting
TFT monitors are operated with background lighting. The luminosity of the
background lighting can decrease while the Tablet PC is in use. However, you
can set the brightness of your monitor individually.
Synchronising the display on the touchscreen and an external monitor
In Windows 7, you can switch between touchscreen and external monitor, if you open
Control Panel - Windows Mobility Center,sectionExternal Display.
24
Working with the Tablet PC
Select display orientation (portrait or
landscape orientation)
Landscapeorientat ionPortraitorientationDisplayorientation
You can choose to use either portrait or landscape orientation for the display. To switch between
portrait and landscape orientation, press the tablet button ,see"Tablet buttons", Page 33.
Windows 7
You can change these settings in the Fujitsu menu or under Start -(Settings -)
Control Panel -Hardware and Sound -Display -Settings.
Profiles for operating with various different screen modes can be selected via
the Fujitsu Tablet Control option in the Fujitsu menu. These profiles have preset
standard configurations that can be modified as desired.
These settings do not just affect the monitor settings on the Tablet PC, but
also any external monitors that may be connected.
Using fingers
You can execute certain commands by using your finger tip on the touchscreen of your device.
Everything which you can select or activate using your finger tip can also
be selected or activated using the stylus pen.
Calibrate the Dual Digitizer for finger-based
operation of the device
Before operating the device for the first time using the fingers, you must calibrate
it so that your finger tips are recognized as accurately as possible.
You must calibrate the device again as soon as you notice that the
variations are becoming greater.
Operating system Menu
Windows 7 To calibrate, call up the Hardware and Sound / Tablet PC Settings function
in the Control Panel. You need to calibrate both portrait and landscape
formats.
25
Working with the Tablet PC
Actions with one finger
Action Description
Selecting objects (click with the left mouse
button)
►With your finger, tap once brieflyonthe
object.
Starting programs (double-click with the left
mouse button)
►With your finger, tap twice briefly in quick
succssion on the program icon.
Moving objects/windows (drag with left mouse
button pressed, Drag & Drop)
►Place a finger directly on the object/window,
hold the finger pressed against the
touchscreen and move the desired
object/window.
Opening a context menu (click with the right
mouse button)
►Touch the desired item once with your finger
tip. Keep the finger tip pressed against the
touchscreen.
The context menu appears.
Moving the cursor ►Position one finger on the touchscreen and
move the finger in the desired direction.
26
Working with the Tablet PC
Actions with two fingers
Action Description
Scrolling
►Position two fingers on the touchscreen.
►Move your fingers upwards to scroll up.
or
►Move your fingers downwards to scroll
down.
Rotating
►Position the thumb on the touchscreen,
then turn the picture clockwise or
counter-clockwise using your index finger.
27
Working with the Tablet PC
Action Description
Increasing or decreasing the view
►Position two fingers on the touchscreen and
move them apart to increase the view.
or
►Position two fingers on the touchscreen and
move them together to decrease the view.
Blocking context-sensitive menus ►With two fingers, tap twice briefly in quick
succession on the touchscreen.
28
Working with the Tablet PC
Using the stylus pen
1
2
3
1 = pen tip
2 = pen buttons
3 = eyelet for pen cord
You can use the pen on your Tablet PC as an electronic writing implement to select items, and to
navigate through programs on it. Programs that support handwriting recognition also allow you to
write characters directly on the screen with the pen. You can also use the pen as a drawing tool.
The Tablet PC is supplied with a pen cord which you can attach to the eyelets
on the pen and on the Tablet PC.
Use only the pen provided with your Tablet PC. Do not use substitutes that
were not designed for your Tablet PC. Replace the stylus tip if it is worn.
The warranty does not cover a scratched screen.
While writing, you should take care not to scratch the surface of the
display (e.g. with a wristwatch or bracelet).
29
Working with the Tablet PC
The Tablet PC’s pen is an electronic instrument that can be damaged if
used improperly. Handle the pen with care.
The following list contains guidelines for proper pen handling:
• Do not gesture with the pen.
• Do not use the pen as a pointer.
• Do not use the pen on surfaces other than the screen of the Tablet PC.
• Donottrytoturnthethumbgriponthepen.Thethumbgripisusedto
place the pen in its slot and to take it out of the slot.
• Never store the pen with the tip bearing the weight of the pen (e.g. with the tip down
in a pen holder). If the pen is stored with the tip pointing down, this may have
an adverse effect on the pen mechanism (particularly under high temperatures).
In this case the pen tip may react as though it is constantly being pressed down.
To avoid damage, the pen should be stored in the pen slot when not in use.
Thepencanbeinfluenced by electromagnetic fields (cursor quivers or
jumps). There may be a few areas on the screen where the cursor quivers
slightly in spite of pressing the pen down firmly.
The screen responds to entries made with the tip of the finger or the pen when the tip
of the finger or the pen is in direct contact with the screen.
You can use the pen to run all functions for which you would otherwise use a mouse.
The pen does not support erasing functions.
Handling Mouse Pen
Selecting menu
items
Click with the left-hand mouse button. Touch the menu entry with the pen tip.
Starting programs Double click with the left-hand mouse
button.
Briefly touch the program icon twice
with the pen tip.
Moving an
object/window
Drag with the left-hand mouse button
held pressed.
Place the pen tip directly on the
object/window. Hold the pen tip
pressed against the screen. Move the
desired object/window.
Opening a context
menu
Click with the right-hand mouse
button.
Place the pen directly on the required
element and hold the pen pressed
against the screen.
Moving the cursor -Place the pen tip directly on the
screen.
Setting the pen
Operating system Menu
Windows 7 Under Hardware and Sound – Pen and Input Devices in the Control Panel
you can change various settings for the pen (assignment and function of
the pen button).
30
Working with the Tablet PC
Calibrating the pen
Before using the pen for the first time, you should calibrate it so that the cursor follows the
movements of the pen as accurately as possible. You should also always repeat the calibration
if the co-ordination between the pen and cursor movement deteriorates.
Operating system Menu
Windows 7 To calibrate, call up the Hardware and Sound / Tablet PC Settings function
in the Control Panel. You need to calibrate both portrait and landscape
formats.
Replacing the pen tip
With use, the pen tip may become worn or may pick up foreign particles that can
scratch the screen. A damaged or worn tip may not move freely over the screen,
causing unpredictable results when using the pen.
If your pen exhibits these problems, you should replace the pen tip. To do this, use the supplied tool (1).
1
►To remove the tip, position the tip in the gap
between the two ends of the tool supplied.
►Pinch the two ends of the supplied tool
together so that the tip is firmly clasped,
then pull it from the barrel.
►Replace the tip of the pen with one of
the spare tips supplied with your pen.
Insert the flat end of the tip into the
barrel and exerting gentle pressure, push
it in until it is firmly in place.
If the tip is worn or damaged, discard it.
31
Working with the Tablet PC
Removing the pen battery
Do not take off the pen tip to change the battery.
The pen contains one AAAA battery.
1
1
2
►Unscrew and remove the cap from
the pen (1).
►Pull the battery out of the pen (2).
Installing a pen battery
1
1
2
►Insert the new battery in the pen (1).
►Close and screw on the pen cap (2).
Installing a pen cord
You should attach the pen with a pen cord to prevent accidentally dropping or losing it.
►Attach the end of the pen cord with the smaller loop to your pen.
►Attach the end of the pen cord with the larger loop to your Tablet PC.
32
Working with the Tablet PC
Tablet buttons
Your Tablet PC is fitted with three multi-functional tablet buttons. You can navigate on the screen
with a simple press of a button, call preset applications or ones that you have set yourself.
Basic functions before the device has booted
The TPM PPI (Physical Presence Interface) menu is available only
if your system has a TPM module.
The TPM PPI menu is displayed after the security condition for the TPM
running under Windows has been changed.
33
Working with the Tablet PC
Button
Function if the key is
pressed while booting
the system
Function in
application menu/boot
menu/BIOS setup Function in TPM PPI
menu
F1 (Application Menu) Enter (select) F1
F2 (BIOS setup) Down No
—Up Yes
F12 (Boot Menu) ——
To open the Windows Advanced Boot Options menu, first connect an external keyboard to
the device. During the boot process, press the F8 button quickly in succession.
Alternatively, you can start the Fujitsu Recovery Program while the
operating system is running.
Please refer to the "Recovery" manual for more information.
The tablet buttons have different uses in different modes.
Basic functions when the device has booted
Button Basic function
Windows button
This button corresponds to the function of the Windows Start key on a keyboard.
If the button is pressed in combination with the ON/OFF switch, the function
corresponds to the key combination Ctrl +Alt +Del .
Decrease volume
This button reduces the volume of the built-in loudspeakers.
Increase volume
This button increases the volume of the built-in loudspeakers.
Change screen orientation
When you press this button, the orientation of the screen display changes from
portrait (vertical) to landscape (horizontal) or vice versa.
When you would like to use the Tablet PC as an eBook, for example, you would
use the portrait orientation.
When accessing spreadsheets, you would more typically use a landscape
orientation.
Windows 7
When you press this button, the automatic rotation of the display locks and unlocks.
34
Working with the Tablet PC
Webcam
Webcam
Depending on the software used, you can use your Webcam to take pictures,
record video clips or take part in web chats.
• The picture quality depends on the lighting conditions and the software being used.
• You can only operate the webcam with a particular application (e.g. an Internet telephony
program or a video conferencing program which supports a webcam).
• When using the webcam the Tablet PC support must not wobble.
• The webcam automatically adjusts itself to the current light level. For this reason
the touchscreen may flicker while the light level is adjusted.
Further information on using the webcam and on the additional settings
which are possible for your webcam can be found in the help function
of the program which uses the webcam.
If you wish to carry out a function test with your webcam, you can use the corresponding
test software available at "http://www.fujitsu.com/fts/support/index.html".
35
Working with the Tablet PC
Rechargeable battery
RechargeablebatteryBatteryLife,batteryRechargeablebatteryRechargeablebattery
For mobile use, the built-in battery provides the Tablet PC with the necessary power.
You can increase the life of the battery by caring for the battery properly. The average
battery life is around 500 charge/discharge cycles.
You can extend the battery life by taking advantage of the available energy saving functions.
Charging, caring for and maintaining the battery
BatteryBattery
The Tablet PC battery can only be charged when the ambient temperature
is between 5°C and max. 35°C.
You can charge the battery by connecting the Tablet PC to the mains adapter
(see "Mains adapter connecting", Page 18).
If the battery is running low you will hear a warning alarm. If you do not connect the mains adapter
within five minutes of the warning alarm described above, your Tablet PC will switch off automatically.
Monitoring the battery charging level
BatteryBatterystatusmeter
Windows also has a "Battery status meter" in the taskbar for monitoring the battery capacity. When
you place the mouse pointer on the battery symbol, the system displays the battery status.
Battery storage
BatteryBatterySelf-discharge,batteryChargingcapacity,ba ttery
Keep the battery pack between 0°C and +30°C. The lower the temperature at which
the batteries are stored, the lower the rate of self-discharge.
If you will be storing batteries for a longer period (longer than two months),
the battery charge level should be approx. 30 %. To prevent exhaustive
discharge which would permanently damage the battery, check the level
of charge of the battery at regular intervals.
To be able to make use of the optimal charging capacity of the batteries, the battery
should be completely discharged and then fully recharged.
The Tablet PC is equipped with a non-removable battery. Only the optional
Keyboard Docking has a removable battery.
If you do not use the batteries for long periods, remove them from the Keyboard
Docking. Never store the batteries in the device.
36
Working with the Tablet PC
Using the power-management features
PowerPowerBattery
The Tablet PC uses less power when the power management features are enabled. You will
then be able to work longer when using the battery before having to recharge it.
Power efficiency is increased and environmental pollution reduced. By
choosing the best power options, you can make significant savings and
at the same time help protect the environment.
We recommend the following settings:
Function On external power On battery power
Turn off monitor After 10 minutes After 5 minutes
Turn off hard disk(s) After 15 minutes After 10 minutes
Energy saving (S3) After 20 minutes After 15 minutes
Hibernate mode (S4)After 1 hour After 30 minutes
►Select the power management functions in your Control Panel.
►Select the Screen Saver in your Control Panel.
or
►Keep a finger pressed on the desktop. Configure the screensaver under Personalization -
Change screensaver.
If you need further information about an option, you can get help with most settings by
pressing the ?symbol in the upper right of the screen to open the Microsoft Help.
When the Tablet PC is in power saving mode, you must remember the following:
During power saving mode, open files are held in the main memory
orinaswapfile on the hard disk.
Never switch off the Tablet PC while it is in a power saving mode. If the built-in battery is
nearly flat, close the open files and do not go into power saving mode.
If you do not intend to use your Tablet PC for a long period of time:
►Exit the power saving mode if necessary via touching the screen or by switching on the
Tablet PC.
►Close all opened programs and completely shut down the Tablet PC.
37
Working with the Tablet PC
Memory cards
Slot
Your Tablet PC is equipped with an integrated memory card reader. You can use
memory cards to increase the storage of your Tablet PC.
Observe the manufacturer’s instructions when handling the memory cards.
Memorycard
Supported format
The memory card reader supports the following format:
• Secure Digital (SDTM card)
Inserting the memory card
►Carefully slide the memory card into the
slot. The label should be facing upward. Do
not apply excessive force, as otherwise the
delicate contact surfaces could be damaged.
Memorycard
Depending on the particular type
used, the memory card may protrude
slightly from the slot.
38
Working with the Tablet PC
Removing the memory card
Memorycard
In order to protect your data, always follow the correct procedure
for removing the card outlined below.
You can stop the memory card via the corresponding icon in the task bar:
►Tap on the symbol.
►Select the card you want to stop and remove.
►Ta p OK.
Wait for the dialogue box which tells you that it is now safe to remove the memory card.
1
2
►On devices with card locking: Press
on the storage card (1).
Memorycard
The storage card is released and
can now be removed.
►Pull the storage card out of the slot (2).
SIM card
A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a
mobile telephone or Tablet PC and, together with an integrated UMTS / LTE
module, enables access to a mobile radio network.
Please follow the instructions supplied by the provider when handling
the SIM card. If you do not feel the SIM card engage as you insert it,
use a pointed object to insert the SIM card.
39
Working with the Tablet PC
Inserting the SIM card
►Slide the protective rubber cover of the SIM
card slot in the direction of the arrow.
►Open the protective rubber cover over
the SIM card slot.
Do not pull on the SIM card lock! The lock could break off otherwise. Always
slide the lock in the direction of the arrow as shown.
3
1
2
►Slide the SIM card clip in the direction
of the arrow (1).
The clip controls the power supply for the
UMTS / LTE module. The UMTS / LTE
module is switched off while the clip is open.
►Slide the SIM card as shown into
slot (2) until it engages.
►Slide the SIM card clip in the direction
of the arrow (3).
►Close the protective rubber cover of
the SIM card slot.
40
Working with the Tablet PC
Removing a SIM card
►Slide the protective rubber cover of the SIM
card slot in the direction of the arrow.
►Open the protective rubber cover over
the SIM card slot.
Do not pull on the SIM card lock! The lock could break off otherwise. Always
slide the lock in the direction of the arrow as shown.
3
1
2
►SlidetheSIMcardclipinthedirection
of the arrow (1).
►Press on the edge of the SIM card so
that it pops out of the slot slightly.
►Pull the SIM card out of the slot in the
direction of the arrow (2).
►SlidetheSIMcardclipinthedirection
of the arrow (3).
►Close the protective rubber cover of
the SIM card slot.
41
Working with the Tablet PC
Wireless LAN / Bluetooth / UMTS / LTE
radio components
The installation of radio components not approved by Fujitsu Technology Solutions
will invalidate the certifications issued for this device.
Switching the wireless components on and off
Before switching on your device for the first time, the on/off switch for
radio components must be in the "ON" position.
►Slide the ON/OFF switch into the "ON" position to activate the radio components.
WirelessLANWirelessLANBl uetoothBluetooth
or
►Slide the ON/OFF switch to the "OFF" position to deactivate the radio components.
42
Working with the Tablet PC
If you switch off the radio components, the wireless LAN transmission unit (antenna)
and, if present, the Bluetooth and UMTS / LTE module will also be switched off.
You can enable and disable the installed radio components individually
using the WirelessSelector programme
You can also deactivate the wireless components individually in the BIOS Setup.
For this to occur, you must either not have assigned a supervisor password or if a
supervisor password has been assigned, you must know this password.
Pay attention to the additional safety notes for devices with radio components
provided in the "Safety/Regulations" manual.
Details on using Wireless LAN can be found in the online help system
included in the Wireless LAN software.
You can find more information on how to use Bluetooth on the CD you
received with your Bluetooth software.
You can obtain more information on UMTS / LTE from your service provider.
Setting up WLAN access
• Requirement: A WLAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.
Access via UMTS / LTE
If you ordered an integrated UMTS / LTE module with your system, you can enjoy optimum
reception and maximum energy efficiency without awkward cables or antennas. The
optional UMTS / LTE module is ready for use straight away.
If you did not order a UMTS / LTE module, you can purchase the accessories for UMTS /
LTE reception from your retailer or your Fujitsu Technology Solutions dealer.
You will find information on establishing the connection with the UMTS / LTE network
in the documentation for the hardware used.
Your device can connect to the Internet via UMTS / LTE. To do this, use one
of the following types of connection:
• Integrated UMTS / LTE module (availability dependent on your model variant)
• a USB dongle (a USB stick with your mobile phone provider’s SIM card)
• a mobile end-device (e.g. mobile phone with Bluetooth or cable connection)
43
Working with the Tablet PC
Ethernet and LAN (only with Keyboard Docking)
EthernetLAN
The internal network module of your Tablet PC supports Ethernet LAN. You can use it to
establish a connection to a local network (LAN = Local Area Network).
2
1
►Connect the network cable to the LAN
port of the Keyboard Docking (1).
►Connect the network cable to your
network connection (2).
Your network administrator can help you to configure and use the LAN connections.
The network cable is not included in the delivery scope. This type of
cable can be obtained from a specialist dealer.
GPS
GPS
Whether or not your device has this function depends on the
selected device expansion stage.
Keyboard Docking (optional)
Your Keyboard Docking is a device that helps you to quickly connect your Tablet PC
to your peripheral devices, such as a display, mouse, etc.
You need only dock the Tablet PC in order to work with your peripheral devices.
The complete keyboard on the Keyboard Docking enables easy input of texts.
44
Working with the Tablet PC
Ports on the Keyboard Docking
KeyboardDockingPorts
2
3
3
1
4
7
5
6
8
10 9
1 = Release switch
2 = Keyboard Docking connector for the
docking port of the Tablet PC
3 = Status indicators
4 = LAN port
5=USBport(USB2.0)
6 = Pen eject switch
7=Penslot
8 = USB port (USB 2.0)
9 = VGA monitor port
10 = DC input connector (DC IN)
45
Working with the Tablet PC
Connecting the Tablet PC to the Keyboard Docking
It is possible to connect the Tablet PC to the Keyboard Docking during
operation. In case of problems after connecting, we recommend that
you switch off the Tablet PC beforehand.
When the Tablet PC is connected to the Keyboard Docking, you can connect the
mains adapter either to the Tablet PC or the Keyboard Docking.
KeyboardDocking
►Switch off the Tablet PC.
►Remove the power plug of the mains adapter from the mains socket.
►Pull the mains adapter cable out of the DC jack (DC IN) of the Tablet PC.
46
Working with the Tablet PC
2
3
4
1
►Push the Tablet PC on to the Keyboard Docking in the direction of the arrow
(1) until you notice it engage with the connector.
►Plug the DC output connector on the mains adapter into the DC input connector
(DC IN) on the Keyboard Docking (2).
►Connect the power cable to the mains adapter (3).
►Plug the power cable into the mains socket (4).
The docking status indicator at the Keyboard Docking lights up blue.
47
Working with the Tablet PC
The docking status indicator does not indicate that the system is switched on.
Disconnecting the Tablet PC from the Keyboard Docking
It is possible to disconnect the Tablet PC from the Keyboard Docking during operation. In
case of problems after disconnecting, we recommend that the Tablet PC is switched off
or that the appropriate undocking function provided by the operating system is executed.
►Switch off the Tablet PC.
12
►Slide the release switch in the direction of the arrow (1).
►Lift the Tablet PC from the Keyboard Docking in the direction of the arrow (2),
while supporting the underneath of the Keyboard Docking.
48
Working with the Tablet PC
Removable battery of the Keyboard Docking
Removing and installing the battery
Only use rechargeable batteries approved by Fujitsu Technology Solutions.
Never use force when fitting or removing a battery.
Make sure that no foreign bodies get into the battery connections.
Never store a battery for longer periods in the discharged state. This
can make it impossible to recharge.
Removing the battery (Keyboard Docking)
1
2
3
►Slide and hold the release button (1) in direction of the arrow.
►Slide the release button (2) in direction of the arrow.
►Lift the battery out of the battery compartment (3).
49
Working with the Tablet PC
Installing the battery (Keyboard Docking)
2
1
►Place the battery along the edge of the battery compartment.
►Slide the battery into the battery compartment until you feel it engage (1).
►Slide the release button into its locking position (2).
50
Working with the Tablet PC
Batterychargestatusindicator
You can check the charge status directly on the battery itself.
1
a
►Press the key (1).
The LED (a) lights up in one of the following colours:
LED indicator State of charge
Green The battery is between 50 % and 100 %
charged.
Orange The battery is between 11 % and 49 % charged.
Red The battery is between 1 % and 10 % charged.
LED not lit The battery is fully discharged.
51
Working with the Tablet PC
Battery Management Features
When the Tablet PC is connected to the Keyboard Docking, charging and discharging of the batteries
in the Tablet PC and the Keyboard Docking is managed depending on the current operating mode.
Operating mode System on System in Power Save mode
or in Off mode
Mains adapter connected Batteries of Tablet PC and
Keyboard Docking are charged
in parallel
First the battery of the Tablet
PC is charged, then the battery
of the Keyboard Docking
Mains adapter disconnected When enabled in BIOS Setup,
the Tablet PC battery is charged
from the Keyboard Docking
battery
First the battery of the Keyboard
Docking is discharged, then the
battery of the Tablet PC
The system cannot boot up when the Tablet PC battery is empty, even if the
Keyboard Docking battery has some remaining capacity.
When the Tablet PC is connected to the Keyboard Docking, the second
battery takes a few seconds to be activated.
Please note that during charging of the Tablet PC battery from the Keyboard Docking
battery, the charging efficiency is lower than during charging from mains adapter.
52
Security functions
Security functions
Securityfunctions
Your Tablet PC has several security features that you can use to secure your
system from unauthorised access.
This chapter explains how to use each function, and what the benefits are.
Please remember that in some cases, for example, forgetting your password,
you may be locked out and unable to access your data. Therefore,
please note the following information:
• Back up your data on external data carriers at regular intervals.
• Some security functions need you to choose passwords. Make a note
of the passwords and keeptheminasafeplace.
If you forget your passwords you will need to contact the our Service
Desk. Deletion or resetting of passwords is not covered by your warranty
and a charge will be made for assistance.
Configuring the fingerprint sensor
Fingerprintsens orFingerprintsens or
The fingerprint sensor can record an image of a fingerprint. With additional fingerprint
software, this image can be processed and used instead of a password.
1
►You must install the fingerprint software
in order to be able to use the
fingerprint sensor (1).
53
Security functions
Configuring password protection in BIOS Setup Utility
Before using the various options for password protection in the BIOS Setup utility
to increase data security, please observe the following:
Make a note of the passwords and keep them in a safe place. If you forget your
supervisor password you will not be able to access your Tablet PC. Passwords are
not covered by your warranty and a charge will be made for assistance.
Password prote ction
Your password can be up to eight characters long and contain letters and numbers.
No distinction is made between uppercase and lowercase.
Protecting BIOS Setup Utility (supervisor and user password)
If you have opened these operating instructions on the screen, we recommend that
you print out the following instructions. Because you cannot call the instructions
onto the screen while you are setting up the password.
BIOSSetupUtility
You prevent unauthorised use of the BIOS Setup Utility with both the supervisor and the user
password. The supervisor password gives you access to all functions of the BIOS Setup
Utility, while the user password only provides some of the functions. You can only set a
user password if a supervisor password has already been assigned.
Please refer to the "Settings in BIOS Setup Utility", Page 63 section for a
description of how to call up and operate the BIOS Setup Utility.
Setting supervisor and user password
►Start the BIOS Setup Utility and go to the Security menu.
►Select the Set Supervisor Password field and press the Enter key.
With Enter new Password: you are asked to enter a password.
►Enter the password and press the Enter key.
Confirm new Password requires you to confirm the password.
►Enter the password again and press the Enter key.
Changes have been saved is a confirmation that the new password has been saved.
►To set the user password, select Set User Password and proceed exactly as
when configuring the supervisor password.
If you do not want to change any other settings, you can exit BIOS Setup Utility.
►In the Exit menu, select the option Save Changes & Exit.
►Select Yes and press the Enter key.
PasswordSupervisor passwordUserpassword
The Tablet PC is rebooted and the new password is effective. It will now be necessary to
first enter your supervisor or user password in order to open the BIOS Setup Utility. Please
note that the user password only provides access to a few of the BIOS settings.
54
Security functions
Changing the supervisor or user password
You can only change the supervisor password when you have logged into the
BIOS Setup Utility with the supervisor password.
PasswordSupervisorpasswordUserpassword
►Call the BIOS Setup Utility and go to the Security menu.
►When changing the password, proceed exactly as for password assignment.
Removing passwords
To remove a password (without setting a new password) perform the following steps:
PasswordSupervisorpasswordUserpassword
►Start the BIOS Setup Utility and go to the Security menu.
►Highlight the Set Supervisor Password or Set User Password field and press the Enter key.
You will be requested to enter the current password by the Enter Current Password prompt.
You will be requested to enter a new password by the Enter New Password prompt.
►Press the Enter key twice.
►In the Exit menu, select the option Save Changes & Exit.
►Select Yes and press the Enter key.
The Tablet PC is rebooted and the password is cancelled.
Removing the supervisor password simultaneously deactivates the user password.
Password protection for booting of the operating system
With the supervisor password you have set in the BIOS Setup Utility (see
section "Setting supervisor and user password", Page 54), you can also
prevent booting of the operating system.
Operating system
Activating system protection
►Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
►Select the PasswordonBootoption and press the Enter key.
►Select the desired option (Disabled,First Boot or Every Boot) and press the Enter key
►Select the Save Changes & Exit option under Exit.
The Tablet PC reboots. You will be prompted to enter your password (the supervisor password).
Deactivating system protection
►Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
►Select the PasswordonBootoption and press the Enter key.
►Select the Disabled option and press the Enter key.
If you do not want to change any other settings, you can exit BIOS Setup Utility.
►Select the Save Changes & Exit option under Exit.
The Tablet PC reboots. The system is no longer password-protected.
55
Security functions
Password protection for the hard disk
Passwordprotect ion:
The had disk password prevents unauthorised access to the hard disk drives
and is checked internally each time the system is booted. The condition for this
is that you have assigned at least the supervisor password.
Activating hard disk protection
►Call up the BIOS Setup and select the Security menu.
If you have not assigned BIOS passwords yet, define the supervisor and the user
password now, if desired (see "Security functions", Page 53).
►Mark the Hard Disk Security field and press the Enter key.
►In the Drive0 area mark the Set Master Password field and press the Enter key.
Enter new Password then appears and you are asked to enter a password.
►Enter the password and press the Enter key.
Confirm new Password requires you to confirm the password.
►Enter the password again and press the Enter key.
Setup Notice: Changes have been saved is displayed to confirm that the
new password has been saved.
►To assign the password for the second hard disk (Drive1), go to the Drive1 area and
select the field Set Master Password, then proceed in exactly the same way as for
setting up the password for the first hard disk (Drive0).
The field Password Entry on Boot is set to Enabled by default. You can exit the BIOS
Setup once you have finished changing the settings.
►From the Exit menu, choose the option Exit Saving Changes.
►Press the Enter key and select Yes.
The Table PC reboots and your hard disk is now protected with a password. The
password prompt is enabled as soon as the Tablet PC has rebooted.
Deactivating hard disk protection
To cancel a password without setting a new one, proceed as follows:
►Call up the BIOS Setup and select the Security menu.
►Mark the Hard Disk Security field and press the Enter key.
►In the Drive0 area mark the Set Master Password field and press the Enter key.
You will be initially requested to enter the old password by the Enter current Password prompt.
You will then be requested to enter a new password by the Enter new Password prompt.
►After entering the password, press the Enter key three times.
►From the Exit menu, choose the option Exit Saving Changes.
►Press the Enter key and select Yes.
The Tablet PC reboots and there is no longer any password protection for this hard disk.
►To cancel the password for the second hard disk (Drive1), go to the Drive1 area
and select the field Set Master Password, then proceed in exactly the same way as
for cancelling the password for the first hard disk (Drive0).
56
Security functions
Trusted Platform Module (TPM) (device-dependent)
TPMTrustedPlatform M odule
To use the TPM, you must activate the TPM in the BIOS Setup before the software
is installed. The condition for this is that you have assigned at least the supervisor
password (see "Security functions", Page 53).
Enabling TPM
• Requirement: You have assigned a supervisor password, see "Security functions", Page 53.
►Call up the BIOS Setup and select the Security menu.
►Mark the TPM Security Chip Setting field and press the Enter key.
►Select Enabled to activate the TPM.
Once you have activated the TPM the Clear Security Chip option appears.
Select Clear SecurityChipto delete the holder in the TPM. By clicking on Enabled,
all secret keys (e.g. SRK - Storage Root Keys, AIK - Attestation Identity Keys
etc.) generated by applications are deleted.
Please note that you will then no longer be able to access the data you have
encrypted with the keys based on that holder.
►Select the Exit Saving Changes option in the Exit menu.
►Press the Enter key and select Yes.
The Tablet PC restarts and the TPM is switched on after the reboot.
Disabling TPM
• Requirement: You have assigned a supervisor password, see "Security functions", Page 53.
►Call up the BIOS Setup and select the Security menu.
►Mark the TPM Security Chip Setting field and press the Enter key.
►Select Disabled to deactivate the TPM.
►From the Exit menu, choose the option Exit Saving Changes.
►Press the Enter key and select Yes.
The Tablet PC is rebooted and the TPM is disabled.
57
Connecting external devices
Connecting external devices
Under all circumstances, please observe the safety notes provided in the
"Important notes", Page 13 chapter before connecting or disconnecting
any devices to or from your Tablet PC.
Always read the documentation supplied with the device you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
Adhere to the order described below when you connect external devices
to the Tablet PC or separate them from it:
With some devices, such as USB devices, it is not necessary to switch off
the Tablet PC and the device before connecting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the external device.
Some of the external devices require special drivers (see the operating
system and external device documentation).
Connecting devices to the Tablet PC (or Keyboard Docking)
1. Switch off the Tablet PC and all external devices.
2. Remove the mains plug for the Tablet PC and all relevant devices from the sockets.
3. Connect the cables for your external devices following the instructions.
4. Plug all power cables into the mains sockets.
DevicesPeripheraldevices
Disconnecting devices from the Tablet PC (or Keyboard Docking)
1. Switch off the Tablet PC and all external devices.
2. Remove the mains plug for the Tablet PC and all relevant devices from the sockets.
3. Disconnect the cables for your external devices following the instructions.
DevicesPeripheraldev ices
58
Connecting external devices
Connecting an external monitor
HDMI port
HDMIport
The HDMI port of your Tablet PC can be used to connect an external amplifier,
LCD TV or a plasma TV with an HDMI connection.
►Connect the data cable to the
external device.
►Connect the data cable to the HDMI
port of the Tablet PC.
Some LCD televisions have only two loudspeaker connections and therefore
cannot reproduce Dolby digital or DTS. In order to reproduce the sound, you
must go into Windows and adjust the sound settings.
Proceed as follows:
►Select Startsymbol – (Settings) – Control Panel – Hardware and Sound – Sound.
►Mark Realtek HDMI Output.
►Select Properties – Supported formats.
►Deactivate the settings DTS audio and Dolby digital.
►Confirm the settings with OK.
59
Connecting external devices
Connecting an external monitor (Keyboard
Docking only)
An analogue monitor is connected to the analogue VGA monitor port. Screen output
is limited to a maximum of two screens at any one time.
MonitorVGAconnection socketScreenportMonitorport
►Switch off the Tablet PC and the
external monitor.
►Plug the data cable of the external
monitor into the monitor port.
►First switch on the external monitor
and then the Tablet PC.
You can also switch back and forth between the external monitor and
the Tablet PC’s LCD monitor, see chapter .
You can display the same picture on the external monitor and the
Tablet PC’s LCD screen simultaneously.
60
Connecting external devices
Connecting USB devices
USBports
On the USB ports, you can connect external devices that also have a USB port
(e.g. a DVD drive, a printer, a scanner or a modem).
USB devices are hot-pluggable. This means you can connect and disconnect
devices while your operating system is running.
USB 1.x has a maximum data transfer rate of 12 Mbit/s.
USB 2.0 has a data transfer rate of up to 480 Mbit/s.
USB 3.0 has a data transfer rate of up to 5 Gbit/s.
Additional information can be found in the documentation for the USB devices.
►Connect the data cable to the
external device.
►Connect the data cable to a USB port of
the Tablet PC (or Keyboard Docking).
Device drivers
USB devices will be automatically recognised and installed by your operating system.
How to remove USB devices correctly
Always correctly remove the device according to the rules described below,
to ensure that none of your data is lost.
►Left click on the icon to safely remove hardware, located in the taskbar.
►Select the device which you want to shut down and remove.
►Press the Enter key.
Wait for the dialogue box which tells you that it is now safe to remove the device.
61
Connecting external devices
Headphone port
Connectingaudio dev icesAudioportsConnectingheadphones
Via the headphone port, you can connect either a headphone or an external speaker to your Tablet PC.
►Connect the audio cable to the
external device.
►Connect the audio cable to the headphone
port of the Tablet PC.
The internal loudspeakers are disabled.
If you purchase a cable from a retailer, please note the following information:
The headphone port on your Tablet PC is a "3.5 mm jack socket".
If you want to connect headphones or a speaker you will need a "3.5 mm jack plug".
Microphone port
Audiodevices, connecting
AudioportsMicrophone,conn ecting
The microphone port allows you to connect an external microphone, a MiniDisc player,
MP3 player, CD player or a tape deck to your Tablet PC.
►Connect the audio cable to the
external device.
►Connect the audio cable to the microphone
port of the Tablet PC.
62
Settings in BIOS Setup Utility
Settings in BIOS Setup Utility
BIOSSetupUtilitySystemsettings,BIOSSe tupUtilityConfiguration,BIOSS etupUtilitySetupSystemc onfigurationHardwareconfiguration
The BIOS Setup Utility allows you to set the system functions and the hardware
configuration for the Tablet PC.
When it is delivered, the Tablet PC is set to factory default settings. You can
change these settings in BIOS Setup Utility. Any changes you make take effect as
soon as you save and exit the BIOS Setup Utility.
The BIOS Setup Utility program contains the following menus:
About Displays information relating to the BIOS, processor and Tablet PC
System Advanced system settings
Advanced Configuration of various hardware components, such as mouse, keyboard,
processor
Security Password settings and security functions
Boot Configuration of the start-up sequence
Exit Exits the BIOS Setup Utility
Starting the BIOS Setup Utility
►Keep the "Change screen orientation" tablet button pressed and switch the Tablet PC on.
BIOSSetupUtility
►If a password has been assigned, enter the password and press the Enter key.
If you have forgotten the password, contact your system administrator
or contact our customer service centre.
The BIOS Setup Utility starts.
Operating BIOS Setup Utility
BIOSSetupUtility
Press the F1 key to display help on the operation of the BIOS Setup Utility. The description
of the individual settings is shown in the right-hand window of the BIOS Setup Utility.
With the F9 key you can load the default settings of the BIOS Setup Utility.
►Use the cursor keys ←or →to select the menu you wish to access to make changes.
The menu is displayed on the screen.
►Select the option you want to change with the cursor keys ↑or ↓.
►Press the Enter key.
►Press the ESC key to exit the selected menu.
►For future reference, make a note of the changes you have made (for example, in this manual).
63
Settings in BIOS Setup Utility
Exiting BIOS Setup Utility
BIOSSetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes - save changes and exit BIOS Setup Utility
►To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes.
The Tablet PC is rebooted and the new settings come into effect.
Exit Discarding Changes – Discard changes and
exit BIOS Setup Utility
►To discard the changes, select Exit Discarding Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective. The BIOS
Setup Utility is terminated and the Tablet PC is rebooted.
Load Setup Defaults – Copy Standard Entries
►To copy the standard entries for all menus of the BIOS Setup Utility,
choose Load Setup Defaults and Yes.
Discard Changes – Discard changes without exiting
the BIOS Setup Utility
►To discard the changes you have made, select Discard Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective.
You can now make additional settings in the BIOS Setup Utility.
►IfyouwanttoexitBIOS Setup Utilitywith these settings, select Exit Saving Changes and Yes.
Save Changes - save changes without exiting
the BIOS Setup Utility
►To save the changes, select Save Changes and Yes.
The changes are saved. You can now make additional settings in the BIOS Setup Utility.
►If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.
Save Changes and Power Off
►To save the changes and switch off your device, select Save Changes and Power Off and Yes.
The changes are saved. Your device is shut down.
64
Troubleshooting and tips
Troubleshooting and tips
TroubleshootingTi psFaultTroubleshooting
Follow the safety notes in the "Safety/Regulations" manual when
connecting or disconnecting cables.
If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows:
►Make a note of the steps and the circumstances that led to the fault. Also
make a note of any error messages displayed.
►Switch the Tablet PC off.
►Please contact the Hotline/Service Desk.
You can find the telephone numbers in the service desk list. Please have
the following information ready when you call:
• The model name and serial number of the Tablet PC. The serial number
is located on a sticker on the underside of the Tablet PC.
• Notes of any messages that appear on the screen and information on acoustic signals.
• Any changes you have made to the hardware or software after
receiving the Tablet PC.
• Any changes you have made to the BIOS Setup settings after receiving the Tablet PC.
• Your system configuration and all peripheral devices connected to your system.
• Your sales contract.
Our Tablet PCs have been designed primarily with mobile applications in mind. This
means that considerable effort has been made to optimise components and equipment
in terms of weight, space and energy requirements. Depending on the particular
configuration you have purchased, it is possible that functionality may be slightly reduced
compared to a desktop PC if you are running processor-intensive gaming software, e.g.
games with intensive 3D graphics. Updating your hardware with drivers which have not
been approved by Fujitsu Technology Solutions may result in performance losses, data
losses or malfunction of the equipment. A list of approved drivers and current BIOS
versions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"
Help if problems occur
Should you encounter a problem with your computer that you cannot resolve yourself:
►Note the ID number of your device. The ID number is found on the type rating
plate on the back or underside of the casing.
►For further clarification of the problem, contact the Help Desk for your country (see the Help
Desk list or visit the Internet at
"http://support.ts.fujitsu.com/contact/servicedesk/ServiceDeskNumber_Int.asp"). When you
do this, please have ready the ID number and serial number of your system.
65
Troubleshooting and tips
Using the battery reset button
If the device stops responding and no longer reacts to the On/Off switch, use
the battery reset button to shut down the device.
►Disconnect the device from the mains adapter.
►Push a pen or a piece of wire (such as a paper clip) firmly into the opening of
the battery reset button to shut down the system.
►Connect the mains adapter to the device again.
►Switch the device on again.
TheTabletPC’sdateort
ime is incorrect
SummertimeTime,daylights avingsTimenot correctTimenotcorrectIncorre ct da te/ tim eDateisincorrectBufferbattery,load
Cause Troubleshooting
Time and date are incorrect. ►With the BIOS-Setup-Utility, you can set the
date and time in the main menu.
Date and time are still set incorrectly after
switching on the Tablet PC.
►Please contact your sales outlet or our
Hotline/Service Desk.
Battery indicator does not illuminate
Cause Fault elimination
The battery is not installed correctly in the
Keyboard Docking.
►Switch the Tablet PC off.
►Check whether the battery is installed
correctly in its compartment of the Keyboard
Docking.
►Switch the Tablet PC on.
The battery is fully discharged. ►Charge the battery.
or
►Install a charged battery.
or
►Connect the Tablet PC or the Keyboard
Docking to a mains outlet using the
mains adapter.
The Tablet PC’s touchscreen remains dark
Tou ch s c re e ntouchscreenis too dark
Cause Troubleshooting
Touchscreen is switched off. ►Press a key (external keyboard) or tap on
the touchscreen.
External monitor or television set connected. ►Check whether the graphics driver settings
are correct or whether an external monitor
has been detected in "Intel Graphics Media
Accelerator Driver for mobile".
66
Troubleshooting and tips
The display on the Tablet PC’s touchscreen
is difficult to read
Tou ch s c re e nTou c hs c r e en
Cause Troubleshooting
Reflected glare ►Move the Tablet PC into a different position.
►Increase the brightness of the screen.
The external monitor remains blank
Monitor
Cause Troubleshooting
Monitor is switched off.►Switch the external monitor on.
Power saving has been activated (monitor is
blank).
►Press a key (external keyboard) or tap on
the touchscreen.
Brightness is set to dark. ►Adjust the brightness of the monitor.
Screen output is set on the Tablet PC’s
touchscreen.
►Check whether the graphics driver settings
are correct or whether an external monitor
has been detected in "Intel Graphics Media
Accelerator Driver for mobile".
The external monitor’s power cable or data
cable is not connected properly.
►Switch off the Tablet PC and the external
monitor.
►Check whether the power cable is plugged
properly into the external monitor and into
the power socket.
►Check whether the data cable is properly
connected to the Tablet PC and the external
monitor (if it is plugged in with a connector).
►Switch on the Tablet PC and the external
monitor.
The external monitor is blank or the image is unstable
ScreenMonitor
Cause Troubleshooting
The wrong external monitor has been selected
or the wrong screen resolution has been set for
the application program.
►Terminate the application program in
Windows. If the error persists after
terminating the program, use the key
combination for switching the screen output
in order to switch to the touchscreen of the
Tablet PC. Change the following setting:
►Set the screen resolution: Set the screen
resolution as described in the documentation
for your operating system.
►Select monitor: Select monitor 1 or 2 as
described in the documentation for your
operating system.
67
Troubleshooting and tips
The cursor does not correctly follow the
pen movements
Cause Fault elimination
Pen incorrectly calibrated ►Calibrate the pen as shown under Hardware
and Sound / Tablet PC Settings in the Control
Panel, see "Setting the pen", Page 30 and
"Calibrating the pen", Page 31.
Pen input not working
Cause Troubleshooting
Incorrect driver installed. ►If your device is one which can only be
operated using the pen, install the driver for
the standard model.
or
►If your device is one which can be
operated using the pen and by finger,
install the driver for the "Dual Digitizer"
model.
The Tablet PC does not start after switch on
TheTabletPC
Cause Troubleshooting
The battery is not installed correctly. ►Check whether the battery is installed
correctly in its compartment.
►Switch on the Tablet PC.
The battery is dead. ►Charge the battery.
or
►Insert a charged battery.
or
►Connect the mains adapter to the Tablet
PC.
The power adapter is not connected correctly. ►Check whether the mains adapter is
connected correctly to the Tablet PC.
►Switch on the Tablet PC.
The battery of the Tablet PC is fully discharged
and the Tablet PC is connected to the Keyboard
Docking.
►Connect the mains adapter to the Tablet PC.
►Switch on the Tablet PC.
68
Troubleshooting and tips
The Tablet PC stops working
TheTabletPCEnergysaving m ode
Cause Troubleshooting
The Tablet PC is in energy saving mode. ►Leave energy saving mode.
An application programme has caused the
malfunction.
►Close the application program or restart
the Tablet PC (by restarting the operating
system or switching the device off and back
on again).
The battery is dead. ►Charge the battery.
or
►Insert a charged battery.
or
►Connect the mains adapter to the Tablet
PC.
The printer does not print
Printerdoesnot print
Cause Troubleshooting
The printer is not switched on. ►Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).
The printer is not connected correctly. ►Check that the data cable connecting
the Table PC to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.
►Check that the data cable connecting
the Tablet PC to the printer is properly
connected.
►Check whether the correct printer driver is
loaded (refer to the printer documentation).
The radio connection to a network does not work
Theradioconnect iontoane tworkdoes notwork
Cause Troubleshooting
The wireless component is disabled. ►Switch the radio component on (see
"Switching the wireless components on and
off", Page 42).
The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.
►Check whether the radio connection is
switched on via the software.
►Further information on using the radio
component can be found in the help files.
69
Troubleshooting and tips
The battery discharges too quickly
Battery:
Cause Troubleshooting
The battery is either too hot or too cold. In this
case the battery indicator flashes.
►Bring the Tablet PC up/down to a normal
temperature again.
►If the operating time of the battery life is
extremely short, the battery is probably too
old. Replace battery if necessary.
You may have an application running that
consumes a great deal of power due to frequent
accessing of the hard disk or connected external
devices.
►Use the mains adapter as frequently as
possible.
The maximum brightness may have been set
for the screen.
►Reduce the brightness of the screen to
lower energy consumption: You will find the
setting under Control Panel – Hardware and
Sounds – Windows Mobility Center.
Acoustic warnings
Acousticerror m essages
ErrorsCause Troubleshooting
A beep sounds every few seconds.
The battery is almost flat.
►Charge the battery.
Error messages on the screen
Errormessagesont hescreen
Errormessage:
This section describes the error messages generated by the BIOS Setup. Error messages displayed
by the operating system or programmes are described in the relevant documentation.
If the error message appears repeatedly, despite troubleshooting measures, please
contact the place of purchase or our customer service centre.
70
Troubleshooting and tips
Error message/cause Resolution
CMOS battery bad
If the error message occurs repeatedly, the
buffer battery in the Tablet PC is flat.
►Contact your sales outlet or our customer
service centre.
System CMOS checksum bad - default configuration
used
The system configuration information is
incorrect.
►Switch off the Tablet PC.
►Switch on the Tablet PC.
►Keep the "Change screen orientation" tablet
button pressed and switch on the Tablet PC.
►In the BIOS Setup, select the Exit menu.
►Select the entry Load Setup Defaults.
►Select OK and press the Enter key.
Extended memory failed at offset: xxxx Failing Bits:
zzzz zzzz
When testing the extended memory an error has
resulted at the address xxxx.
►Contact your sales outlet or our customer
service centre.
Failure Fixed Disk n
The settings of the hard disk drive are incorrect.
►Start the BIOS Setup (Primary Master
submenu) and select the correct settings.
Keyboard controller error ►Switch off your Tablet PC with the ON/OFF
switch.
►Wait 3 - 5 seconds and switch on the Tablet
PC again.
Keyboard error If you are using an external keyboard:
►Check the connection and reboot the Tablet
PC.
nn Stuck key ►Make sure that no key is pressed.
Operating system not found ►Check in theBIOS Setup whether your hard
disk has been set correctly.
►Make sure that the operating system is
installed on the corresponding drive.
Press <F1> to resume, <F2> to SETUP
This error message appears if an error occurs
during the self-test before starting the operating
system.
►Press the " Alt "key on the Tablet PC to boot
the operating system
►Keep the "Change screen orientation"tablet
button pressed and switch on the Tablet PC
to access the BIOS setup.
Real time clock error ►Contact your sales outlet or our customer
service centre.
nnnnK Shadow RAM failed at offset: xxxx Failing
Bits: zzzz ►Contact your sales outlet or our customer
service centre.
System battery is dead - Replace and run SETUP ►Contact your sales outlet or our customer
service centre.
System cache error - Cache disabled ►Contact your sales outlet or our customer
service centre.
System timer error ►Contact your sales outlet or our customer
service centre.
71
Technical data
Technical data
Tablet PC
General
Processor 3rd Generation Intel® Core™ with vPro™
technology
Main memory (SO DIMM) 4 GByte DDR3 onboard
Electrical data
Safety regulations complied with CE
Protection class II
Maximum power consumption: (Tablet PC on,
connected to Keyboard Docking, with battery
charging)
60 W
Touchscreen
Size 11.6" 16:9 TFT HD
Resolution 1366 x 768 pixels/16 million colours
Pixel class II
Brightness control 12 levels
Technology Wide-View High-Bright HD Display with LED
Background Lighting
Digitizer and glass panel Dual digitizer with matt touch screen
Cameras • Front: HD camera
• Back: 5 megapixels
Graphics card
Chip Intel® HD Graphics 4000
Maximum resolution on external display: 1920 x 1200 pixels
1920 x 1200 pixel HDMI port on the Tablet PC
1920 x 1200 pixel VGA port on the Keyboard
Docking
Dimensions
Width x depth x height 302 mm x 195 mm x 12.7 mm
(Tablet PC only)
302 mm x 203 mm x 27.1 mm
(Tablet PC connected to Keyboard Docking)
Weight depending on configuration • from 0.85 kg
• from 1.70 kg (with Keyboard Docking)
Input devices
Tablet buttons 3 keys
Windows button 1 key
Pen Active pen with 2 push buttons
Slots
72
Technical data
Memory card slot 1xSDcard
SIM card slot 1x
Ports
HDMI port 1 x
Headphones port/Line Out 3.5mmstereominijack
Microphone port/Line In 3.5mmstereominijack
Docking port 1 x
USB (Universal Serial Bus) 2x USB (1 x USB 3.0, 1x USB 2.0)
Ambient conditions
Environment class DIN IEC 721 7K1
Mechanism class DIN IEC 721 7M2
Operating temperature 5℃.... 35℃
Transport temperature (2K2) –10°C .... 60°C
73
Technical data
Rechargeable battery
You can find information on the batteries used in your device at
"http://www.fujitsu.com/fts/support/index.html".
3-cell lithium polymer battery 3150 mAh
Rated voltage 10.8 V
Rated capacity 34 Wh
Mains adapter (60 W)
Technicaldata
Rated voltage 19 V
Max. rated current 3.16 A
An additional mains adapter or power cable can be ordered at any time.
Keyboard Docking (optional)
Electrical data
Safety regulations complied with CE
Protection class II
Ports
USB (Universal Serial Bus) 2 x USB 2.0
Docking port 80-pin
Monitor port (analogue) 15-pin
LAN port RJ45
Input devices
Keyboard86 keys, spill resistant
Touchpad2keys
Ambient conditions
Environment class DIN IEC 721 7K1
Mechanism class DIN IEC 721 7M2
Operating temperature 5 °C .... 35℃
Transport temperature –10 °C .... 60 ℃
74
Manufacturer’s notes
Manufacturer’s notes
Disposal and recycling
Notes
Information about this subject can be found on your Tablet PC or on our Internet pages.
Declarations of Conformity
Declarationof conformity
The "Declarations of Conformity" for the device can be found at our Internet
address under: "http://ts.fujitsu.com/ce".
Fujitsu Technology Solutions hereby declares that your device is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
CE marking
CEmarkingCEmarkingNotesElectromagneticcompat ibilityLowvoltagedi rective
The shipped version of this device complies with the requirements of European Union
directives 2004/108/EC "Electromagnetic Compatibility", 2006/95/EC "Low voltage directive" and
2009/125/EC "Ecodesign Directive".
CE marking for devices with radio component
This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament
and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment
and mutual recognition of conformity.
This equipment can be used in the following countries:
Belgium Bulgaria Denmark Germany
Estonia Finland France Greece
UK Ireland Iceland Italy
Latvia Liechtenstein Lithuania Luxembourg
Malta Netherlands Norway Austria
Poland Portugal Rumania Sweden
Switzerland Slovakia Slovenia Spain
Czech Republic Hungary Cyprus
Contact the corresponding government office in the respective country for current information on
possible operating restrictions. If your country is not included in the list, then please contact
the corresponding supervisory authority as to whether the use of this product is permitted in
your country.
76
Manufacturer’s notes
Regulatory notices
If there is no FCC logo and also no FCC ID on the device then this device is
not approved by the Federal Communications Commission (FCC) of the USA.
Although it is not explicitly forbidden to travel in the US trading area carrying this
device, to avoid trouble at customs clearance, Fujitsu Technology Solutions GmbH
recommends not to bring this device into the US trading area.
Regulatory information for Tablet PCs without radio device
Regulatoryinformation
NOTICE:
Changes or modifications not expressly approved by Fujitsu Technology Solutions
could void this user’s authority to operate the equipment.
Notice to Users of Radios and Television
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet that is on a different circuit than the receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Notice to Users of the US Telephone Network
Your Tablet PC may be supplied with an internal modem which complies with Part 68 of the
FCC rules. On this Tablet PC is a label that contains the FCC Registration Number and the
Ringer Equivalence Number (REN) for this equipment among other information. If requested,
the user must provide their telephone company with the following information:
1. The telephone number to which the Tablet PC is connected.
2. The Ringer Equivalence Number (REN) for this equipment.
3. The equipment requires a standard modular jack type USOC RJ-11C
which is FCC Part 68 compliant.
4. The FCC Registration Number.
This equipment is designed to be connected to the telephone network or premises wiring using
a standard modular jack type USOC RJ-11C which is FCC Part 68 compliant and a line cord
between the modem and the telephone network with a minimum of 26AWG.
The REN is used to determine the number of devices that you may connect to your telephone
line and still have all of those devices ring when your number is called. Too many devices
on one line may result in failure to ring in response to an incoming call. In most, but not all,
areas the sum of the RENs of all of the devices should not exceed five (5). To be certain
of the number of devices you may connect to your line, as determined by the RENs, contact
your local telephone company. If this equipment causes harm to the telephone network, your
telephone company may discontinue your service temporarily. If possible, they will notify you
in advance. If advance notice is not practical they will notify you as soon as possible. You
will also be advised of your right to file a complaint with the FCC.
77
Manufacturer’s notes
This fax modem also complies with fax branding requirements per FCC Part 68.
Your telephone company will probably ask you to disconnect this equipment from the telephone
network until the problem is corrected and you are sure that the equipment is not malfunctioning.
This equipment may not be used on coin-operated telephones provided by your telephone
company. Connection to party lines is subject to state tariffs. Contact your state’s public utility
commission, public service commission or corporation commission for more information.
This equipment includes automatic dialing capability. When programming and/or
making test calls to emergency numbers:
• Remain on the line and briefly explain to the dispatcher the reason for the call.
• Perform such activities in off-peak hours, such as early morning or late evening.
FCC rules prohibit the use of non-hearing aid compatible telephones in the
following locations or applications:
• All public or semi-public coin-operated or credit card telephones.
• Elevators, highways, tunnels (automobile, subway, railroad or pedestrian) where a
person with impaired hearing might be isolated in an emergency.
• Places where telephones are specifically installed to alert emergency authorities
such as fire, police or medical assistance personnel.
• Hospital rooms, residential health care facilities, convalescent homes and prisons.
• Hotel, motel or apartment lobbies.
• Stores where telephones are used by patrons to order merchandise.
• Public transportation terminals where telephones are used to call taxis or
to reserve lodging or rental cars.
• In hotel and motel rooms as at least ten percent of the rooms must contain hearing
aid-compatible telephones or jacks for plug-in hearing aid compatible telephones which
will be provided to hearing impaired customers on request.
78
Manufacturer’s notes
DOC (Industry CANADA) notices
DOC(INDUSTRYCANADA)NOTICES
Notice to Users of Radios and Television
This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment
Regulations.
CET appareil numérique de la class B respecte toutes les exigence du Réglement
sur le matérial brouilleur du Canada.
Notice to Users of the Canadian Telephone Network
NOTICE:
This equipment meets the applicable Industry Canada Terminal Equipment Technical
Specifications. This is confirmed by the registration number. The abbreviation, IC, before
the registration number signifies that registration was performed based on a Declaration of
Conformity indicating that Industry Canada technical specifications were met. It does not
imply that Industry Canada approved the equipment. Before connecting this equipment to
a telephone line the user should ensure that it is permissible to connect this equipment to
the local telecommunication facilities. The user should be aware that compliance with the
certification standards does not prevent service degradation in some situations.
Repairs to telecommunication equipment should be made by a Canadian authorised
maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or
any equipment failures may give the telecommunication company cause to request the
user to disconnect the equipment from the telephone line.
NOTICE:
The Ringer Equivalence Number (REN) for this terminal equipment is 0.0. The REN assigned
to each terminal equipment provides an indication of the maximum number of terminals
allowed to be connected to a telephone interface. The termination on an interface may
consist of any combination of devices subject only to the requirement that the sum of the
Ringer Equivalence Numbers of all the devices does not exceed five.
CAUTION:
For safety, users should ensure that the electrical ground of the power utility, the
telephone lines and the metallic water pipes are connected together. Users should NOT
attempt to make such connections themselves but should contact the appropriate electric
inspection authority or electrician. This may be particularly important in rural areas.
79
Manufacturer’s notes
Avis Aux Utilisateurs Du Réseau Téléphonique Canadien
AVIS : Le présent matériel est conforme aux spécifications techniques d’Industrie Canada
applicables au matériel terminal. Cette conformité est confirmée par le numéro d’enregistrement.
Le sigle IC, placé devant le numéro d’enregistrement, signifie que l’enregistrement s’est effectué
conformément à une déclaration de conformité et indique que les spécifications techniques
d’Industrie Canada ont été respectées. Il n’implique pas qu’Industrie Canada a approuvé le matériel.
Avant de connecter cet équipement à une ligne téléphonique, l’utilisateur doit vérifier
s’il est permis de connecter cet équipement aux installations de télécommunications
locales. L’utilisateur est averti que même la conformité aux normes de certification ne
peut dans certains cas empêcher la dégradation du service.
Les réparations de l’équipement de télécommunications doivent être effectuées par un service de
maintenance agréé au Canada. Toute réparation ou modification, qui n’est pas expressément
approuvée par Fujitsu, ou toute défaillance de l’équipement peut entraîner la compagnie de
télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique.
AVIS : L’indice d’équivalence de la sonnerie (IES) du présent matériel est de 0.0. L’IES
assigné à chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent
être raccordés à une interface téléphonique. La terminaison d’une interface peut consister
en une combinaison quelconque de dispositifs, à la seule condition que la somme d’indices
d’équivalence de la sonnerie de tous les dispositifs n’excède pas 5.
AVERTISSEMENT:
Pour assurer la sécurité, les utilisateurs doivent vérifier que la prise de terre du service
d’électricité, les lignes télphoniques et les conduites d’eau métalliques sont connectées
ensemble. Les utilisateurs NE doivent PAS tenter d’établir ces connexions eux-mêmes,
mais doivent contacter les services d’inspection d’installations électriques appropriés
ou un électricien. Ceci peut être particulièrement important en régions rurales.
80
Manufacturer’s notes
UL Notice
This unit requires an AC adapter to operate. Only use a UL Listed Class 2 adapter.
The correct output rating is indicated on the AC adapter label. Refer to the illustration
below for the correct AC Adapter output polarity:
CAUTION:
To reduce the risk of fire, use only 26AWG or larger telecommunications line cord.
For Authorized Repair Technicians Only
CAUTION:
For continued protection against risk of fire, replace only with the
same type and rating fuse.
WARNING:
Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
81
Manufacturer’s notes
FCC Regulatory information for Tablet PCs with radio device
Regulatoryinform ation
Federal Communications Commission statement
This device complies with Part 15 of FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of this device.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy. If not installed and used in accordance with
the instructions, it may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the distance between the equipment and the receiver.
3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to.
4. Consult the dealer or an experienced radio/TV technician for help.
Please note the following regulatory information related to the optional radio device.
FCC Radio Frequency Exposure statement
This radio device has been evaluated under FCC Bulletin OET 65C and found compliant with the
requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF
Exposure from radio frequency devices. The radiated output power of this radio device is far below
the FCC radio frequency exposure limits. Nevertheless, this device shall be used in such a manner
that the potential for human contact during normal operation is minimized. When using this device, a
certain separation distance between antenna and nearby persons must be maintained to ensure RF
exposure compliance. In order to comply with RF exposure limits established in the ANSI C95.1
standards, the distance between the antennas and the user should not be less than 20 cm (8 inches).
Regulatory Notes and Statements
Radio device, health and authorisation for use
Radio-frequency electromagnetic energy is emitted from the wireless devices. The energy levels
of these emissions, however, are far much less than the electromagnetic energy emissions from
wireless devices such as mobile phones. Radio devices are safe for use by consumers because
they operate within the guidelines found in radio frequency safety standards and recommendations.
The use of the radio devices may be restricted in some situations or environments, such as:
• on board an airplane, or
• in an explosive environment, or
• in situations where the interference risk to other devices or services is
perceived or identified as harmful.
In cases in which the policy regarding use of radio devices in specific environments is not
clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain
authorization to use these devices prior to operating the equipment.
82
Manufacturer’s notes
Regulatory Information/Disclaimers
Installation and use of this radio device must be in strict accordance with the instructions included
in the user documentation provided with the product. Any changes or modifications made to this
device that are not expressly approved by the manufacturer may void the user’s authority to operate
the equipment. The manufacturer is not responsible for any radio or television interference caused
by unauthorized modification of this device, or the substitution or attachment of connecting cables
and equipment other than those specified by the manufacturer. It is the responsibility of the user
to correct any interference caused by such unauthorized modification, substitution or attachment.
The manufacturer and its authorized resellers or distributors will assume no liability for any damage
or violation of government regulations arising from failure to comply with these guidelines.
Export restrictions
This product or software contains encryption code which may not be exported or
transferred from the US or Canada without an approved US Department of Commerce
export license. This device complies with Part 15 of FCC Rules, as well as ICES 003 B
/ NMB 003 B. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesirable operation.
Modifications not expressly authorised by Fujitsu Technology Solutions may
invalidate the user’s right to operate this equipment.
83
Index
Index
A
Acoustic error messages 70
Audio devices, connecting 62
Audio ports 62
B
Battery
battery life 36
caring for and maintaining 36
charge level 36–37
charging 36
self-discharge 36
storage 36
Battery status meter 36
Battery:
discharges too quickly 70
BIOS Setup Utility
calling 63
exiting 64
operating 63
protecting with password 54
settings 63
Bluetooth
Switching off module 42
Switching on module 42
Bluetooth, safety notes 13
Buffer battery, load 66
C
CE marking 76
Charging capacity, battery 36
Cleaning 16
Configuration, BIOS Setup Utility 63
Connecting audio devices 62
Connecting headphones 62
Crystal View display
cleaning 16
D
Date is incorrect 66
Declaration of conformity 76
Device
setting up 18
Devices
connecting 58
disconnecting 58
Display orientation
selecting 25
DOC (INDUSTRY CANADA) NOTICES 79
E
Electromagnetic compatibility 76
Energy
energy saving 14
Energy saving 14
Energy saving mode
leaving 69
Error message:
on the screen 70
Error messages on the screen 70
Errors
Acoustic warnings 70
Ethernet LAN 44
F
Fault
correction 65
Fingerprint sensor 53
configure 53
First-time setup 17
G
Getting started 17
GPS 44
H
Hardware configuration 63
HDMI port 59
I
Important notes 13
Incorrect date/time 66
K
Keyboard
cleaning 16
Keyboard Docking
Connecting a Tablet PC 46
Ports 45
L
Landscape orientation
screen 25
Life, battery 36
Low voltage directive 76
84
Index
M
Mains adapter
connecting 18
setting up 18
Memory card
handling 38
inserting 38
removing 39
Microphone, connecting 62
Mobile operation 15
Monitor
connecting 60
drifting display 67
remains blank 67
Monitor port
see VGA connection socket 60
N
Notes 13
CE marking 76
cleaning 16
disposal / recycling 76
energy saving 14
Safety 13
touchscreen 24
transport 15
O
Operating system
activating system protection 55
cancel system protection 55
protecting with password 55
P
Packaging 17
Password
changing 55
entering 54
removing 55
Password protection 54
Password protection:
hard disk 56
Peripheral devices
connecting 58
disconnecting 58
Portrait orientation
screen 25
Ports
Keyboard Docking 45
Power
power consumption 37
power-management features 37
Power-on indicator 22
Preparing for operation 18
Printer does not print 69
R
Radio component:
safety notes 13
Rechargeable battery 36
see Battery 36
Regulatory information
Tablet PCs with radio device 82
Tablet PCs without radio device 77
S
Safety notes 13
Screen
no screen display 67
Screen port
see VGA connection socket 60
Security functions 53
Selecting a location 18
Self-discharge, battery 36
Setup
see BIOS Setup Utility 63
Slot
Memory cards 38
Status indicators 20
Summer time 66
Supervisor password
changing 55
entering 54
removing 55
Suspend/Resume button 22
Switchingonforthefirst time 19
Symbols
indicators 20
System configuration 63
System settings, BIOS Setup Utility 63
T
Tablet PC
before you travel 15
cleaning 16
switching off 23
transporting 15
using 20
Tablet PC, operation 20
Tablet PC: switching on 22
Technical data
Mains adapter 74
The radio connection to a network does
not work 69
85
Index
The Tablet PC
cannot be started 68
doesn’t work. 69
Time not correct 66
Time, daylight savings 66
Tips 65
Touchpad
cleaning 16
Touchscreen
cleaning 16
difficult to read 67
notes 24
reflected glare 67
remains blank 66
touchscreen is too dark 66
TPM 57
Transport
Transport damage 17
Transportation 15
Travel, Tablet PC 15
Troubleshooting 65
Trusted Platform Module 57
U
USB ports 61
User password
changing 55
entering 54
removing 55
V
VGA connection socket 60
W
Webcam 35
Wireless LAN
Switching off module 42
Switchingonmodule 42
Wireless LAN:
safety notes 13
86