Fujitsu Rack conversion kit 4U User Manual
Displayed below is the user manual for Rack conversion kit 4U by Fujitsu which is a product in the Mounting Kits category. This manual has pages.
Related Manuals
Content
Backup
LTO drives & RDX drive
HD_cage
RAID
ODD
HD_SSD
8
13
10
11
12
Keyboards, Mice, USB devices
Power supply units, power cables, country specifics
15
PSU
others
USB_devices
16
System Management, ATD, RS232 port, TPM module
PRIMERGY TX2550 M4
Tower or 4U Rack server
1
6
4
14
LAN Components
Fibre Channel Controller
Infiniband Controller
Optical disk drives (DVD, DVD-rw, Blu ray)
Storage drives - PCIe SSD - SAS/SATA SSD & HDD
Order codes, information E5-2600v5 series processors
DDR4 System memory (RAM) and memory modes
HDD cage kits
SAS / RAID Controller and components
Chapter
3
2
Folder
Cover
LAN
FC_IB
7
9
Base
CPU
RAM
List of content, Instructions for usage of this
configurator, abbreviations
Describes base units of TX2550 M4
Description
System Description for easier understanding
Describes rack mount kits and services
5
GFX
Graphics-, Grid-cards, GPU and Xeon Co processors
<-- order code E-part (bold) --
<-- order code L-part (bold)
<-- "name" of this part
<--description of this part, in same cases as well description of content
<--requires a free PCIe slot --> means total amount of PCIe slots reduced
<--indicates how often this part can be configured in the related Server
For further information see:
Link to datasheet:
http:// xxx
http://ts.fujitsu.com/products/standard_servers/index.html
(internet)
https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/Pages/default.aspx
(extranet)
S26361-F4610-E2
PLAN 2x1Gb Ethern. Controller
i350-T2 chip (based on Intel
Powerville) offers 2x1Gb RJ45
connectors
S26361-F4610-L3
Fujitsu is providing the content of this document with very high accuracy. In case you identify a mistake, we would kindly
encourage you to inform us. We kindly ask for understanding, that errors still may occur and that Fujitsu may change this
document without notice
Instructions
This document contains basic product and configuration information that supports you in more complicated
configurations.
In any case we recommend to use the PC-/SystemArchitect to make sure, that you configure a valid system.
This System configurator is divided into several chapters. They are identical to the current price list and PC-
/SystemArchitect.
PCIe Gen2 x4 full height card
max. 6x per system
Text fields with grey color offer extra information for related topics (e.g prerequesites,
technical back ground, configuration rules, limitations, …
Chapter xx - description of chapter
vSAN
OS
storage tiering
RAID
offers optimized storage allocation (fast area for "hot data"; slower area for "cold data")
OS
operating system
OS=operating system - required for running, organize and administrating the server
hot data
Drives
Data which are currently being processed
cold data
Drives
Data which are currently not processed (only stored)
ODD
Drives
E-Part
"Einbau-Part"
"e.g. S26361-F1234-E240" ordercode with "E" means it is either integrated into to Server (CPU, Mem, ..)
or integrated in the shipping box /Keyboard, Mouse, ..)
L-Part
"Lose Lieferung-Part"
"e.g. S26361-F1234-L240" ordercode with "L" means, the part will be shipped with extra package, may
be as well with extra shipment
optical disk drive (i.e. DVD-player, DVD-burner, Blu ray player, blu ray burner)
RAID
Drives, RAID
RAID 0 = max speed, RAID 1 = mirroring, RAID 5 = 1 out of x drives is spare
Spaces
OS
Microsoft spaces, optimized in Win2012 R2 offers software RAID and storage tiering
LFF
Drives
large form factor (=3.5")
CPU
Processor
central processing unit ("processor")
SSD
Drives
Solid state disk (Non volatile storage device), 2.5" (SFF)
SFF
Drives
small form factor (=2.5")
SATA
Drives, RAID
Serial ATA (HDD, SSD) current SATA speed = 6GBit/s
HDD
Drives
Hard disk drive (Non volatile storage device), 2.5" (SFF) or 3.5" (LFF)
Abbreviations
SAS
Drives, RAID
Serial attached SCSI Device (HDD, SSD, LTO drives); SAS2.0 = 6GBit/s; SAS3.0 = 12GBit/s
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
cnfgTX2550M4.xlsx Description Page 4 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
Modular PSU 450W platinum hot plug
1x
1x
1x
2x
PLAN EM Blind Panel OCP
1x
Independant Mode installation
Region kit APAC/EMEA/India
iRMC S4 advanced pack
recommended components for TX2550 M4
#
cnfgTX2550M4.xlsx Description Page 5 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
S26361-K1596-V424
C h o o s e o n e b a s e u n i t
PY TX2550 M4 Tower, 24x2.5"
S26361-K1596-V112
Tower server, expandable to 12x3.5";
Incl. D3386 board, hp/red. fans, up to
8x card slots, lockable front bezel.
PY TX2550 M4 Tower, 4x3.5" basic
S26361-K1596-V224
S26361-K1596-V208
PY TX2550 M4 Tower, 8x2.5" basic
PY TX2550 M4 Tower, 8x2.5"
PY TX2550 M4 Tower 4x3.5' basic and
PY TX2550 M4 Tower 8x2.5' basic do
not support ATD options!
Chapter 1 - base unit
Start
A
Interfaces at front side
- 2x USB 3.0 (no USB wakeup)
Interfaces internal
- 1x USB 2.0 for backup devices, 1x USB 3.0 (type A)
- 2x M.2 SATA/PCIe
- 1x connector for TPM, 1x microSD card slot
Interfaces at rear side
- 1x optional RS-232-C (serial port, 9 pin)
- 2x LAN Rj45 (additional 2x RJ45 optionally available)
- 1x service LAN RJ45 (1 Gbit)
- 1x VGA (15 pins)
- 4x USB 3.0
PRIMECENTER Rack
Tower server, not expandable;
Incl. D3386 board, red. non-hp fans,
6x card slots, lockable front bezel.
Tower server, expandable to 24x2.5";
Incl. D3386 board, hp/red. fans, up to
8x card slots, lockable front bezel.
PY TX2550 M4 Tower, 8x3.5"
PY TX2550 M4 Rack, 16x2.5"
S26361-K1596-V416
A
Tower server, not expandable;
Incl. D3386 board, hp/red. fans, up to
8x card slots, lockable front bezel.
Rack server, not expandable;
Incl. D3386 board, hp/red. fans, up to
8x card slots, rack front bezel.
Power supply units & cooling:
PRIMERGY TX2550 M4 offers bays for 2x (1x optional hot plug redundant) power supply units of 450W, 800W, 1.200W with up to 96% efficiency.
Equipped with high performance, full height CPU heat pipes and 3x120mm high power fans (optional non-hot plug redundant or single hot plug
red.) with optimized blades and fan control for silent and safe operation. Rack options ex factory or via retrofit upgrade with rack conversion kit.
Server Management:
iRMC S5 (integrated Remote Management Controller) on-board with dedicated Service LAN-port and integrated graphics controller. With onboard
indicators and controls to easily highlight failed components via LEDs displayed during service even without mains connection by simply pressing
the "indicate CSS" button. Optional ServerView Suite software incl. ServerView Installation Manager, Server View Remote Management and tools.
Platform:
Fujitsu Systemboard D3386 made in Germany based on Chipset Intel® C624, up to two Xeon EP2600 v5 series CPUs, two Intel® UltraPath
Interconnect (Intel® UPI) point-to-point links and onboard RAID 0/1 6Gbit/s available for up to 8x SATA drives.
Slots: 6x PCIe slots are on board, with optional riser card up to 7x PCIe slots + 1x PCI32 slot are available:
> 4x PCIe slots onboard, full height, 167mm lengh, supported with first CPU:
Slot 1: PCIe-Gen3 x8 (occupied in configurations with 2x RAID controllers; notched for installation of a x16 card)
Slot 2: PCIe-Gen3 x8 (occupied in configurations with 1x RAID controller; notched for installation of a x16 card)
Slot 3: PCIe-Gen3 x8 (notched for installation of a x16 card)
Slot 4: PCIe-Gen3 x16 (occupied in configurations with optional riser card or retimer)
> Optional full height riser card on PCIe slot 4 offers 2x additional PCIe slots, full height, 252mm and 1x PCI32 slot, with first CPU:
Slot 5: PCIe-Gen3 x8
Slot 6: PCIe-Gen3 x8
Slot 7: PCI-32Bit
> 2x PCIe slots onboard full height, 167mm lengh, supported with second CPU:
Slot 8: PCIe-Gen3 x16 (occupied in configurations with 1x Retimer controller (when riser card (on slot 4) parallelly configured))
Slot 9: PCIe-Gen3 x16
System RAM:
12x slots for DDR4-2666MHz RAM modules available (6x RAM modules per CPU). Memory speed depends on CPU and configuration.
LAN: 2x 1Gb LAN onboard; optional 2x 10Gb T or 2x 10Gb SFP+ interface card onboard with OCP carrier card (OCP carrier card blocks PCIe slot 8).
PY TX2550 M4 Tower, 16x2.5"
S26361-K1596-V216
Rack server, expandable to 24x2.5";
Incl. D3386 board, hp/red. fans, up to
8x card slots, rack front bezel.
Rack server, expandable to 12x3.5";
Incl. D3386 board, hp/red. fans, up to
8x card slots, rack front bezel.
PY TX2550 M4 Rack, 8x3.5"
S26361-K1596-V312
S26361-K1596-V108
Tower server, expandable to 8x3.5";
Incl. D3386 board, red. non-hp fans,
6x card slots, lockable front bezel.
S26361-K1596-V232
Tower server, expandable to 32x2.5";
Incl. D3386 board, hp/red. fans, up to
8x card slots, lockable front bezel.
PY TX2550 M4 Rack, 24x2.5"
S26361-K1596-V432
Rack server, expandable to 32x2.5";
Incl. D3386 board, hp/red. fans, up to
8x card slots, rack front bezel.
PY TX2550 M4 Rack, 8x2.5"
Tower base units, non-hp fans, 6x card slots
Tower base units, hp fans, up to 8 card slots
Rack base units, hp fans, up to 8 card slots
Base units for 16x2.5", without Expander*
* Without SAS Expander for configurations with:
1x 16-channel PRAID controller EP540i, or
2x 8-channel HBA or mirrored RAID controllers.
cnfgTX2550M4.xlsx base Page 6 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
for mounting in asymmetrical
PRIMECENTER M1 racks - 1
bracket PC M1 Rack asym
Installation ex factory in a PRIMECENTER Rack
Fujitsu will deliver the PRIMERGY RX2560 mounted in a Rack System
and all wired connections are tested with PRIMECENTER M1 16U, 24U,
42U rack - Systems and components will be delivered installed in the
rack
Only together with a PC M1 rack (S26361-K827-Vxxx)
Mounting of RMK in symmetrical racks (no
support brackets needed)
Bracket 2U for asymmetrical
racks
S26361-F2735-L31
S26361-F2735-E82
Lateral cable management for
2U servers or higher
S26361-F2735-E71
No rackmount. Upgrade later
possible with L-part
Rackmount Kit ex factory
> 1 pair of vario carrier with variable length
& quick release lever support
> 1 pair of telescopic drop-in rails with
Cable Management Arm (CMA) adapter
telescopic drop-in rail, full extractical,
supports 1-hand-mounting
Bracket 4U for asymmetrical
racks
1x per system
RMK-F2_DI_CMA_QRL_LV
Chapter 2 - Rack architecture
S26361-F1729-L290
max. 1x per System
1x per system
A
PRIMECENTER Rack
B
S26361-F2735-E111
No Rackmount-Kit
S26361-F2735-E285
S26361-F2735-L285
S26361-F2735-L7
S26361-F2735-L82
2U cable management arm
(CMA) for 2U server or higher
for mounting in symmetrical
PRIMECENTER M1 racks
- 1 bracket PC M1 Rack
1x per system
SNP:SY-F1647E301-P
max. 1x per system
S26361-F4530-E12
S26361-F4530-E10
The installation service is to be ordered once per
installable server/storage subsystem, in order to get
the server/storage subsystem mounted into the
racks. In case of the 46 U PCR S2 this service has to
be ordered, to get the mounting kits and the cables
installed.
Contains all necessary parts to convert PRIMERGY
TX2550 M4 Tower Server into a Rack server.
Rack mounting kit has to be ordered seperately.
Rack conversion kit
cnfgTX2550M4.xlsx base Page 7 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
Xeon Gold 5118 12C 2.3GHz 105W
S26361-F4051-L419
Xeon Gold 5120 14C 2.2GHz 105W
S26361-F4051-E120
Xeon Bronze 3100 - Basic (Shelf 1)
64-bit Intel Xeon processor supporting DDR4 @ 2133MHz & QPI Bus @ 9.6 GT/s
Xeon Bronze 3104 6C nHT 1.7GHz 85W
S26361-F4051-E104
S26361-F4051-L104
Xeon Bronze 3106 8C nHT 1.7GHz 85W
S26361-F4051-E106
S26361-F4051-L106
S26361-F4051-L114
S26361-F4051-L116
S26361-F4051-L212
S26361-F4051-L120
Xeon Gold 5115 10C 2.4GHz 85W
S26361-F4051-E115
S26361-F4051-L115
64-bit Intel Xeon processor supporting HT*, DDR4 @ 2400 MHz & QPI Bus @ 10.4 GT/s
Xeon Gold 5100 - Advanced (Shelf 3)
S26361-F4051-E118
S26361-F4051-L118
S26361-F4051-E234
S26361-F4051-E226
Chapter 3 - CPU
Xeon Silver 4116 12C 2.1GHz 85W
S26361-F4051-E116
Xeon Silver 4112 4C 2.6GHz 85W
S26361-F4051-E212
Xeon Silver 4114 10C 2.2GHz 85W
S26361-F4051-E114
B
Xeon Silver 4100 - Frequency Optimized (Shelf 2)
64-bit Intel Xeon processor supporting HT*, DDR4 @ 2400 MHz & QPI Bus @ 9.6 GT/s
Xeon Silver 4100 - Standard (Shelf 2)
64-bit Intel Xeon processor supporting HT*, DDR4 @ 2400 MHz & QPI Bus 9.6 GT/s
Xeon Silver 4108 8C 1.8GHz 85W
S26361-F4051-E108
S26361-F4051-L108
Xeon Silver 4110 8C 2.1GHz 85W
S26361-F4051-E110
S26361-F4051-L110
There are 2 processor sockets available. Please configure 1 or 2 Processors.
>> All processors have to be the same type.
>> With one processor LOM, iRMC and 6x DIMM slots are available
>> With two processors all 12x DIMM slots are available.
>> To configure 2nd CPU an additional cooler kit is required.
>> Empty CPU slot have to be filled up with a CPU Dummy! * HT = Hyper Threading
S26361-F4051-E232
S26361-F4051-E236
S26361-F4051-L236
Xeon Gold 6100 - Frequency Optimized (Shelf 4)
64-bit Intel Xeon processor supporting HT*, DDR4 @ 2666 MHz & QPI Bus @ 10.4 GT/s
Xeon Gold 6136 12C 3.0GHz 150W
S26361-F4051-L228
S26361-F4051-L234
Xeon Gold 6128 6C 3.4GHz 115W
Xeon Gold 6134 8C 3.2GHz 130W
Xeon Gold 6126 12C 2.6GHz 125W
Xeon Gold 5100 - Frequency Optimized (Shelf 3)
64-bit Intel Xeon processor supporting HT*, DDR4 @ 2666 MHz & QPI Bus @ 10.4 GT/s
Xeon Gold 5122 4C 3.6GHz 105W
S26361-F4051-E222
S26361-F4051-L222
Xeon Gold 6100 - Advanced (Shelf 4)
S26361-F4051-L130
Xeon Gold 6140 18C 2.3GHz 140W
S26361-F4051-E140
S26361-F4051-L140
64-bit Intel Xeon processor supporting HT*, DDR4 @ 2666 MHz & QPI Bus @ 10.4 GT/s
Xeon Gold 6130 16C 2.1GHz 125W
S26361-F4051-E130
S26361-F4051-E138
S26361-F4051-E148
S26361-F4051-E152
S26361-F4051-E153
S26361-F4051-E160
Xeon Platinum 8160 24C 2.1GHz 150W
S26361-F4051-L160
Xeon Platinum 8100 Advanced (Shelf 4)
64-bit Intel Xeon processor supporting HT*, DDR4 @ 2666 MHz & QPI Bus @ 10.4 GT/s
Xeon Platinum 8153 16C 2.0GHz 125W
S26361-F4051-L138
S26361-F4051-L148
S26361-F4051-L152
Xeon Gold 6148 20C 2.4GHz 150W
Xeon Gold 6152 22C2.1GHz 140W
Xeon Gold 6138 20C 2.0GHz 125W
S26361-F4051-E242
S26361-F4051-L226
S26361-F4051-L232
S26361-F4051-L242
S26361-F4051-L153
Xeon Gold 6132 14C 2.6GHz 140W
Xeon Gold 6142 16C 2.6GHz 150W
S26361-F4051-E228
Xeon Platinum 8164 26C 2.0GHz 150W
S26361-F4051-E164
S26361-F4051-L164
C1
Xeon Gold 5100 - Embedded (Shelf 3)
64-bit Intel Xeon processor supporting HT*, DDR4 @ 2400 MHz & QPI Bus @ 10.4 GT/s
Xeon Gold 5119T 14C 1.9GHz 85W
Xeon Silver 4100 - Embedded (Shelf 2)
64-bit Intel Xeon processor supporting HT*, DDR4 @ 2400 MHz & QPI Bus @ 9.6 GT/s
Xeon Silver 4114T 10C 2.2GHz 85W (only Special Release)
S26361-F4051-E414
S26361-F4051-L414
S26361-F4051-E419
cnfgTX2550M4.xlsx CPU Page 8 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
D
Cooling Kit 2nd CPU
S26361-F3849-E100
C1
Cooler Kit (see comment above; for upgrade please use according kit to the selected CPU)
Cooler Kit for 2nd CPU
S26361-F4051-L850
cnfgTX2550M4.xlsx CPU Page 9 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
only special release
only special release
only special release
NVDIMM 2666 (will be launched in 2018; not POR for first release)
Registered Memory (RDIMM) with DDC (chipkill) and ECC support x8
8GB (1x8GB) 2Rx8 DDR4-2666 R ECC
S26361-F4026-E118
S26361-F4026-L118
16GB (1x16GB) 2Rx8 DDR4-2666 R ECC
S26361-F4026-E116
S26361-F4026-L116
Registered Memory (RDIMM) LR with DDC (chipkill) and ECC support
64GB (1x64GB) 4Rx4 DDR4-2666 LR ECC
S26361-F4026-E464
S26361-F4026-L464
16GB (1x16GB) 2Rx4 DDR4-2666 R ECC
S26361-F4026-E226
S26361-F4026-L226
64GB (1x64GB) 4Rx4 DDR4-2666 3DS ECC
S26361-F4026-E364
S26361-F4026-L364
8GB (1x8GB) 1Rx4 DDR4-2666 R ECC
16GB (1x16GB) 1Rx4 DDR4-2666 R ECC
Registered Memory (RDIMM) with DDC (chipkill) and ECC support x4
S26361-F4026-E208
S26361-F4026-L208
S26361-F4026-E216
S26361-F4026-L216
Mirror Channel Mode
Each CPU offers 6 Slots for DDR4 Memory Modules organised in 1 Banks and 6 Channels with 2 Memory Controllers (3 Channels
each).
If you need more than 6 Slots you have to configure the 2nd CPU.
Depending on the amount of memory configured you can decide between 4 basic modes of operation (see explanation
below).
There are 2 different kinds of DDR4 Memory Modules available: RDIMM and RDIMM 3DS (also known as TSV)
Mix of RDIMM and RDIMM 3DS is under investigation (currently not allowed).
Supported memory capacities per CPU:
192 GB DDR4 RDIMM (6x 32GB 2Rx4)
384 GB DDR4 RDIMM 3DS (6x 64GB 4Rx4)
Supported memory capacities per System:
384 GB using RDIMM
768 GB using RDIMM 3DS technology with 64GB per module
The memory speed is independent from the configuration (1DPC) but restricted by the CPU SKU (max. 2.666 MT/s).
DDR4 memory is operated at 1.2V
Chapter 4 - DDR4 System memory
D
S26361-F3694-E10
Independent Memory Mode
S26361-F3694-E2
Perfomance Memory Mode
BIOS preconfiguration for Mirror mode. Two or three identical memory modules are always equipped at one memory controller to use the mirrored
channel mode. Half of the modules contain active data, the remaining modules contain mirrored data. See details below.
S26361-F3694-E3
Independent Channel Mode allows all channels to be populated in any order. All channels must run at the same interface frequency. But each channel
may run at different DIMM timings (RAS latency, CAS latency, and so forth). The slowest memory module defines to bus speed.
Configuration: minimum 1 memory module per CPU, maximum 6 memory modules per CPU
Configuration: 6 memory modules per CPU
BIOS preconfiguration for maximum Performance. Four identical memory modules will be equipped in each slot of each channel to achieve highest
memory performance. Always a multiple of 6 identical modules must be configured per CPU. All six modules are active and full capacity can be used.
Preview on NVDIMM support in 2018 (not POR for release in 2017)
Up to 4 NVDIMMs are supported per System (2 per CPU)
This leads to the following maximum memory capacity per System:
2-304 GB DDR4 with 4x 512GB NVDIMM (2.048GB) + 8x 32GB RDIMM (256GB)
256GB (1x256GB) DDR4-2666 NV ECC
TBD
TBD
NVDIMM 2666 (will be launched in 2018; not POR for first release)
512GB (1x512GB) DDR4-2666 NV ECC
TBD
TBD
128GB (1x128GB) DDR4-2666 NV ECC
TBD
TBD
32GB (1x32GB) 2Rx4 DDR4-2666 R ECC
S26361-F4026-E232
S26361-F4026-L232
Registered Memory (RDIMM) 3DS with DDC (chipkill) and ECC support
Configuration: minimum 4 memory module or 8 memory module or 12 memory modules per CPU
E
cnfgTX2550M4.xlsx RAM Page 10 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
*) For the delivery ex factory the system will be prepared with dedicated BIOS setting.
required
required if 2nd CPU
Bank I Data Data Data Data Data Data Data Data Data Data Data Data is configured
(black sockets)
optional, any type
required
required if 2nd CPU
Bank I Data Data Data Data Data Data Data Data Data Data Data Data is configured
(black sockets)
optional, any type
required
required if 2nd CPU
Bank I Data
Mirror
Data Data Data Data Data
Mirror
Data Data Data Data is configured
(black sockets) optional, same type
in Bank per CPU
optional, any type
1st XEON CPU
(4 - 28 Core)
2nd XEON CPU
(4 - 28 Core)
Mirrored Channel Mode (2 DIMMs per CPU) requires identical modules on channel A & B (1st CPU) or channel G & H (2nd CPU) 50% of the capacity is
used for the mirror => the available memory for applications is only half of the installed memory. If this mode is used, a multiple of 2 identical
modules has to be ordered.
Mirror Channel Mode (2 DIMMS per CPU)
Channel A
Channel B
Channel C
Channel D
Channel E
Channel F
Channel G
Channel H
Channel J
Channel K
Channel L
Channel M
1st XEON CPU
(4 - 28 Core)
2nd XEON CPU
(4 - 28 Core)
Performance Channel Mode
Channel A
Channel B
Channel C
Channel D
Channel E
Channel F
Channel G
Channel H
Channel J
Channel K
Channel L
Channel M
1st XEON CPU
(4 - 28 Core)
2nd XEON CPU
(4 - 28 Core)
Mirrored channel mode *)
Performance mode
LRDIMM
Use case, advantage
1x8GB
Notes
6x32GB
if second CPU is configured
with one CPU
with one CPU
Capacity
Min. Memory per CPU
Max. Memory per CPU
SDDC (chipkill) support
yes
Mode
Max. Memory per System
any
Channel A
Channel B
Channel C
Channel D
Detailed infomation
RDIMM
supports detecting multi-bit errors
offers maximum performance and capacity
yes
4 identical Modules / Bank
no
yes
offers maximum security
yes
no
yes
yes
RDIMM
x8
Configuration
offers max. flexibility, upgradeability, capacity
LRDIMM
x4
1, 2 or 3 Modules per Bank
4 identical Modules / Bank
Independant channel mode
12 Modules / System
6x64GB
Configuration
1 Module / CPU
6 Modules / CPU
The memory sockets on the Systemboards are color coded
Bank I
black sockets
Bank II
blue sockets
RDIMM
1x64GB
384GB
768GB
Independant channel mode
Channel E
Channel F
Channel G
Channel H
Channel J
Channel K
Channel L
Channel M
cnfgTX2550M4.xlsx RAM Page 11 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
required
required if 2nd CPU
Bank I D/M D/M D/M Data Data Data D/M D/M D/M Data Data Data is configured
(black sockets) optional, same type
in Bank per CPU
optional, any type
required
required if 2nd CPU
Bank I Data
Mirror
Data Data
Mirror
Data Data
Mirror
Data Data
Mirror
Data is configured
(black sockets) optional, same type
in Bank per CPU
optional, any type
required
required if 2nd CPU
Bank I D/M D/M D/M D/M D/M D/M D/M D/M D/M D/M D/M D/M is configured
(black sockets) optional, same type
in Bank per CPU
optional, any type
1st XEON CPU
(4 - 28 Core)
2nd XEON CPU
(4 - 28 Core)
Mirrored Channel Mode requires identical modules on channel A, B, C, D, E, F (1st CPU) or channel G, H, J, K, L and M (2nd CPU) 50% of the capacity is
used for the mirror => the available memory for applications is only half of the installed memory. If this mode is used, a multiple of 6 identical
modules has to be ordered.
1st XEON CPU
(4 - 28 Core)
2nd XEON CPU
(4 - 28 Core)
Mirrored Channel Mode (4 DIMMs per CPU) requires identical modules on channel A, B, D & E (1st CPU) or channel G, H, K & L (2nd CPU) 50% of the
capacity is used for the mirror => the available memory for applications is only half of the installed memory. If this mode is used, a multiple of 4
identical modules has to be ordered.
Mirror Channel Mode (6 DIMMS per CPU)
Channel A
Channel B
Channel C
Channel D
Channel E
Channel F
Channel G
Channel H
Channel J
Channel K
Channel L
Channel M
1st XEON CPU
(4 - 28 Core)
2nd XEON CPU
(4 - 28 Core)
Mirrored Channel Mode (3 DIMMs per CPU) requires identical modules on channel A, B & C (1st CPU) or channel G, H & J (2nd CPU) 50% of the capacity
is used for the mirror => the available memory for applications is only half of the installed memory. If this mode is used, a multiple of 3 identical
modules has to be ordered.
Mirror Channel Mode (4 DIMMS per CPU)
Channel A
Channel B
Channel C
Channel D
Channel E
Channel F
Channel G
Channel H
Channel J
Channel K
Channel L
Channel M
Mirror Channel Mode (3 DIMMS per CPU)
Channel A
Channel B
Channel C
Channel D
Channel E
Channel F
Channel G
Channel H
Channel J
Channel K
Channel L
Channel M
cnfgTX2550M4.xlsx RAM Page 12 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
„on special release only!“
F
Dual head + professional 2-D + 3-D supported for
Windows OS native driver support for Linux OS
max. 1x per system
S26361-F2748-L538
Chapter 5 - Graphics cards
E
S26361-F2748-E538
The high end optional NVIDIA NVS315 graphic card offers dual head operation and
full 3D video support.
The cables for either two times DVI-I or VGA connections are included.
Remote Video direction via iRMC must be disabled.
This PCIe-x16 card can also be installed in a PCIe-x4, x8 or standard x16 slot.
occupies slot 3 (or 8)
PGRA CP NVS 1GB VGA PCIe x16
NVIDIA NVS315 1024 MB PCIe-x16
Connectors: 1x LFH 59, cable kit for 2x DVI or 2x
VGA cable kits included
cnfgTX2550M4.xlsx GFX Page 13 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
Preferred slots for controller assignement
General drive numbering scheme
Rear side view (incl. riser card option; refer to sheet "Description" for details)
1st Retimer 2nd RAID Controller
2nd Retimer 1st RAID Controller
TX2550 M4 front views of expandable base units and corresponding HD drive cage options:
Base unit
HD cage upgrades
Base unit
24x SAS Expander included in
Upgrade kit for 4x3.5" HDD
HD cage upgrades
ODD / Backup
3x 1.6x5.25" bays are available for an optical and/or backup drives in the upper drive area.
ODD / Backup
3x 1.6x5.25" bays are available for an optical and/or backup drives in the upper drive area.
ODD / Backup
3x 1.6x5.25" bays are available for an optical and/or backup drives in the upper drive area.
ODD / Backup
1x 9.5mm bay is available for a slim optical drive in the upper drive area.
Upgrade kit for 4x3.5" HDD, mounted in the upper drive area, incl. 24x SAS Expander
Upgrade kit for 2x non-hp 2.5" HDD/SSD, mounted in the left side of the bottom/mid HD cages
(drives not visible/accessible from the outside); requires UG-kit for 4x3.5" HDD
Chapter 6 - HD drive cage
PY TX2550 M4 Tower, 4x3.5"
S26361-K1596-V108
RAID configuration
F
RAID configuration
S26361-F4047-E11
HD drive cage is a metal box providing bays for 3.5" HDDs or 2.5" HDDs/SSDs/PCIe-SSDs. Choose out of the
following HD cage upgrade kits, depending on pre-selected TX2550 M4 base unit and the targeted configuration.
Each upgrade kit contains all relevant parts such as metal cage, backplane, cables and mounting material.
Upgrade kits for the upper drive area require the completion of the mid drive area (except for PCIeSSDs).
Up to 3x 1.6x5.25" bays are available in the upper drive area for an ODD and/or backup drive configurations; in the
12x3.5" configuration, a 9.5mm bay is available for a slim ODD. Refer to sections "ODD" and "backup" for details.
Upgrade kits are available either ex factory (E-codes) or for retrofit upgrade (L-codes).
RAID configurations are recommendations; refer to section "RAID" for available options.
PY TX2550 M4 Tower, 8x3.5"
S26361-K1596-V112
S26361-F4047-E12
PY TX2550 M4 Rack, 8x3.5"
S26361-K1596-V312
RAID configuration
8-channel HBA- or RAID-Controller. Refer to section "RAID" for options.
8-channel HBA- or RAID-Controller. Refer to section "RAID" for options.
HBA- or RAID-Controller or onboard RAID. Refer to section "RAID" for options.
S26361-F4047-L11
Upgrade kit for 4x3.5" HDD, mounted in the mid drive area
S26361-F4047-L12
S26361-F3900-E125
S26361-F3900-L125
RAID configuration
8-channel HBA- or RAID-Controller. Refer to section "RAID" for options.
Example: 3.5"
Example: 2.5"
cnfgTX2550M4.xlsx HD_cage Page 14 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
Base unit
24x SAS Expander included in
Upgrade kit for 8x2.5" HDD
HD cage upgrades
Base unit
Including 32x SAS Expander!
HD cage upgrades
Upgrade kit for 8x2.5" PCIe-SSD, mounted in the upper drive area. This option requires 2x Retimer or EP5xx-series
PRAID controllers. Retimer requires 2x CPU. -L32 requires S26361-F4047-E31 or -L31. Only special release.
ODD / Backup
3x 1.6x5.25" bays are available for an optical and/or backup drives in the upper drive area.
ODD / Backup
1x 1.6x5.25" bay is available for an optical or backup drive in the upper drive area.
S26361-F4047-L32
8-channel HBA- or RAID-Controllers, plus 1x or 2x Retimer-Controllers.
Refer to section "RAID" for options.
RAID configuration
3x 8-channel HBA- or RAID-Controllers. Refer to section "RAID" for options.
S26361-F4047-L22
Upgrade kit for 8x2.5" HDD/SSD, mounted in the upper drive area.
This option requires S26361-F4047-E21 / S26361-F4047-L21.
Upgrade kit for 4x2.5" PCIe-SSD, mounted in the upper drive area.
This option requires 1x Retimer or EP5xx-series PRAID controller.
RAID configuration
S26361-F4047-E31
S26361-F4047-E22
S26361-F4047-E32
S26361-F4047-L31
ODD / Backup
3x 1.6x5.25" bays are available for an optical and/or backup drives in the upper drive area.
PY TX2550 M4 Tower, 8x2.5"
S26361-K1596-V224
S26361-K1596-V232
PY TX2550 M4 Rack, 24x2.5"
S26361-K1596-V432
S26361-F4047-E22
RAID configuration
HBA- or RAID- or Retimer-Controllers. Refer to section "RAID" for options.
S26361-F4047-E31
S26361-F4047-E32
S26361-F4047-L22
S26361-F4047-L31
Upgrade kit for 8x2.5" HDD/SSD, mounted in the upper drive area.
This option requires S26361-F4047-E21 / S26361-F4047-L21.
Upgrade kit for 4x2.5" PCIe-SSD, mounted in the upper drive area.
This option requires 1x Retimer or EP5xx-series PRAID controller.
S26361-F4047-E21
S26361-F4047-L32
RAID configuration
8-channel HBA- or RAID-Controller. Refer to section "RAID" for options.
S26361-F4047-L21
Upgrade kit for 8x2.5" HDD/SSD, mounted in the mid drive area, incl. 24x SAS Expander
S26361-K1596-V424
RAID configuration
HBA- or RAID-Controller. Refer to section "RAID" for options.
PY TX2550 M4 Rack, 8x2.5"
PY TX2550 M4 Tower, 24x2.5"
ODD / Backup
3x 1.6x5.25" bays are available for an optical and/or backup drives in the upper drive area.
ODD / Backup
1x 1.6x5.25" bay is available for an optical or backup drive in the upper drive area.
Upgrade kit for 8x2.5" PCIe-SSD, mounted in the upper drive area. This option requires 2x Retimer or EP5xx-series
PRAID controller. Retimer requires 2x CPU. -L32 requires S26361-F4047-E31 or -L31. Only special release.
cnfgTX2550M4.xlsx HD_cage Page 15 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
TX2550 M4 front views of Not expandable base units (no HD drive cage options available):
Base unit
Base unit
3x 1.6x5.25" bays are available for an optical and/or backup drives in the upper drive area.
ODD / Backup
3x 1.6x5.25" bays are available for an optical and/or backup drives in the upper drive area.
PY TX2550 M4 Tower, 16x2.5"
PY TX2550 M4 Rack, 16x2.5"
S26361-K1596-V216
S26361-K1596-V416
2x 8-channel HBA- or mirrored RAID-Controllers or 1x 16-channel PRAID controller EP540i. Refer to
section "RAID" for options.
RAID configuration
PY TX2550 M4 Tower, 8x2.5"
S26361-K1596-V208
RAID configuration
8-channel HBA- or RAID-Controller or onboard RAID. Refer to section "RAID" for options.
ODD / Backup
G
You did not find your preffered drive cage configuration in this list of popular bundles?
Please contact our made4you team (mailto: customer.projects@ts.fujitsu.com) for customer specific
solutions, or visit us: https://partners.ts.fujitsu.com/com/order-supply/General%20information/made4you
cnfgTX2550M4.xlsx HD_cage Page 16 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
for combination and max number of controllers please see folder base / chassis;
max number of some controllers can vary with base units with 6x card slots
operation of expander with PRAID CP400i is not supported
PRAID CP400i RAID Contr. No Cache
PSAS CP400i HBA SAS Contr.
No Cache
Dual RAID mode with 2 RAID cards as soon as available.
Available only for S26361-K1596-V216 / V416.
RAID 0,1,1E,10,5,50,6,60
optional Licence Activation Key, a free of charge test licence is available at PRIMERGY-PM, FastPath is included in Controller FW
License Activation Key for CacheCade 2.0Cache
RAID Advanced SW Option CacheCade ®Broadcom: SSD-cache-based HDD accelleration
optional Transportable Flash module (TFM) and Flash Backup Unit (FBU), both components required
PRAID EP420i for SafeStore R. Contr.
optional Licence Activation Key, a free of charge test licence is available at PRIMERGY-PM, FastPath is included in Controller FW
License Activation Key for CacheCade 2.0Cache
RAID Advanced SW Option CacheCade ®Broadcom: SSD-cache-based HDD accelleration
optional TFM module and Flash Backup Unit (FBU), both components required
RAID 0,1,1E,10,5,50,6,60
RAID 0,1,1E,10,5,50,6,60
RAID 0,1,1E,10,5,50,6,60
optional Flash Backup Unit (FBU), Transportable Flash module (TFM) is already included
* SAS, SATA: max 1x, NVMe: max 1x
** SAS, SATA: max 1x, NVMe: max 3x additional = (1+3) for -V884, available Q1 18
PSAS CP400e HBA SAS Contr. FH No Cache
PRAID EP420i for SafeStore FH
optional Licence Activation Key, a free of charge test licence is available at PRIMERGY-PM, FastPath is included in Controller FW
License Activation Key for CacheCade 2.0Cache
RAID Advanced SW Option CacheCade ®Broadcom: SSD-cache-based HDD accelleration
optional TFM module and Flash Backup Unit (FBU), both components required
H
No HW RAID, No Cache, simple route-through incl. Signal enhancement; device management by INTEL VMD
divides PCIe3.0 x16 lanes into 4x x4 lanes , supports up to 4x 2.5" PCIe-SSD SFF
requires 1x LP PCIe 3.0 x16 (int.) slot
internal controllers for PCIe SSD SFF (2,5" NVMe PCIe) drives, no HW-RAID
retimer controller for internal 2,5" NVMe SSD PCIe SSD SFF (2,5" NVMe PCIe)
PPCI CP x16 retimer
No Cache
No HW-RAID
1x
S26361-F4048-E1
tbd
For Expander configurations PRAID EPxxxi are optimal for performance, PRAID CP400i is not released for expander configurations, max. 8 drives
supported
FBU Option for PRAID EP4xx: Supercap securing the power supply of the RAID controller in
case of power failure including cable with 55cm lenght
4x
S26361-F5243-E155
S26361-F5243-L115
8 ports 3, 6 & 12Gb/s SAS/SATA HDD/ SSD, 2x SFF8644 (external Mini-SAS HD)
requires 1x LP PCIe 3.0 x8 (int.) slot, based on LSI SAS3108
4x
S26361-F5243-E670
S26361-F5243-L670
TFM module for 2GB Cache
NV-RAM & FBU control logic
4x
S26361-F5243-E200
S26361-F5243-L200
For Expander configurations PRAID EPxxxi are optimal for performance, PRAID CP400i is not released for expander configurations, max. 8 drives supported.
2GB Cache
RAID 0,1,1E,10,5,50,6,60
4x
S26361-F3847-E4
S26361-F3847-L504
RAID / SAS, SATA controllers for external drives with Cache and opt. TFM module + Flash Backup Unit and opt. Advanced SW Options
PRAID EP420e RAID Contr. FH
2GB Cache
RAID 0,1,1E,10,5,50,6,60
4x
S26361-F3847-E2
S26361-F3847-L502
8 ports 3, 6 & 12Gb/s SAS/SATA HDD/ SSD, 2x SFF8644 (external Mini-SAS HD)
requires 1x LP PCIe 3.0 x8 (int.) slot, based on LSI SAS3008
external SAS, RAID controller with 2nd Level cache 2GB
G
external SAS controller
HBA controller for ext. drives SAS, SATA HDD or SSD drives
HBA, no RAID
2x
S26361-F3845-E1
S26361-F3845-L501
** SafeStore (SED) RAID controller require SED HDD or SSD
devices
16 ports 3, 6 & 12Gb/s SAS/SATA HDD/ SSD, based on LSI SAS3516, supports up to 16 devices without expander or
16 ports 8Gb/s NVMe PCIe, supports up to 4 x4 NVMe devices without expander
includes Fastpath and SafeStore Advanced SW-Licence
requires 1x LP PCIe 3.0 x8 (int.) slot, based on LSI SAS3516
FBU Option for PRAID EP5xx: Supercap securing the power supply of the RAID controller in
case of power failure including cable with 55cm lenght
1x
S26361-F4042-E155
S26361-F4042-L110
PRAID EP580i RAID Contr. FH**
8GB Cache
1x
S26361-F4042-E8
S26361-F4042-L508
8 ports 3, 6 & 12Gb/s SAS/SATA HDD/ SSD, supports up to 8 devices without expander or
8 ports 8Gb/s NVMe PCIe, supports up to 2 x4 NVMe devices
includes Fastpath and SafeStore Advanced SW-Licence
requires 1x LP PCIe 3.0 x8 (int.) slot, based on LSI SAS3516
internal NVMe, SAS, SATA RAID controller with 2nd Level cache 2GB, 4GB, 8GB
internal drive RAID / SAS controllers for E91 and SAS, SATA HDD or SSD drives
PRAID EP520i RAID Contr. FH*
2GB Cache
1x
S26361-F4042-E2
S26361-F4042-L502
PRAID EP540i RAID Contr. FH**
4GB Cache
1x
S26361-F4042-E4
S26361-F4042-L504
FBU Option for PRAID EP4xx: Supercap securing the power supply of the RAID controller in
case of power failure including cable with 55cm lenght
1x
S26361-F5243-E155
S26361-F5243-L115
1x
S26361-F5243-E670
S26361-F5243-L670
TFM module for 2GB Cache
NV-RAM & FBU control logic
1x
S26361-F5243-E200
S26361-F5243-L200
2GB Cache
RAID 0,1,1E,10,5,50,6,60
1x
S26361-F5243-E14**
S26361-F5243-L14**
8 ports 3, 6 & 12Gb/s SAS/SATA HDD/ SSD, supports up to 8 devices without expander
requires 1x LP PCIe 3.0 x8 (int.) slot, based on LSI SAS3108
PRAID EP420i RAID Contr.
2GB Cache
RAID 0,1,1E,10,5,50,6,60
1x
S26361-F5243-E12
S26361-F5243-L12
FBU Option for PRAID EP4xx: Supercap securing the power supply of the RAID controller in
case of power failure including cable with 55cm lenght
1x
S26361-F5243-E155
S26361-F5243-L115
8 ports 3, 6 & 12Gb/s SAS/SATA HDD/ SSD, supports up to 8 devices without expander
requires 1x LP PCIe 3.0 x8 (int.) slot, based on LSI SAS3108
1x
S26361-F5243-E670
S26361-F5243-L670
TFM module for 1GB Cache
NV-RAM & FBU control logic
1x
S26361-F5243-E100
S26361-F5243-L100
internal drive RAID / SAS, SATA controllers with Cache and opt. TFM module + Flash Backup Unit and opt. Advanced SW Options
PRAID EP400i RAID Contr.
1GB Cache
1x
S26361-F5243-E11
S26361-F5243-L11
HBA + RAID 0, 1
1x
S26361-F3842-E2
S26361-F3842-L502
8 ports 3, 6 & 12Gb/s SAS/SATA HDD/ SSD, supports up to 8 devices without expander
requires 1x LP PCIe 3.0 x8 (int.) slot, based on LSI SAS3008
internal RAID controller with 2nd Level cache 1GB, 2GB
intenal HBA and RAID controller, no 2nd Level cache
internal drive RAID / HBA controllers for SAS, SATA HDD or SSD drives
RAID 0, 1, 1E, 10, 5, 50
1x
S26361-F3842-E1
S26361-F3842-L501
Chapter 7 - SAS / RAID Controller
F
onboard SATA controller with SW-RAID
onboard controller for SATA HDD or SSD drives
4 ports 3, 6Gb/s SATA HDD/SSD
based on Intel chipset
No Cache
SW-RAID 0, 1
1x
onboard, included
This PCIe card comes in a full height profile PCIe form factor The E-order code contains the fitting cable (length) per each system .
The L-order code contains all cables for the related system. The switch must be installed in PCIe Slot 4. Otherwise the datarate should
be decrease.
CacheCade + FastPath is supported
SafeStore + FastPath is supported
Check: the FBU can / cannot be combined with Advanced Thermal design.
max 2 FBU can be integrated per System
cnfgTX2550M4.xlsx RAID Page 17 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
S26361-F3267-E2
S26361-F3267-L2
DVD-RW supermulti SATA
all formats, DUAL/DL,
DVD-RAM only W2K,
W3K and Linux
1.6" * 5.25" black bezel
max. 1x per system
6x BD-RW, 8x DVD,
24x CD, BD DL and
all CD/DVD formats.
9.5mm ultra slim
drive integrated into
a 5.25" bay.
1.6" * 5.25" black bezel
DVD-ROM or CD-ROM
1.6" * 5.25" black bezel
max. 1x per system
max. 1x per system
Chapter 8 - ODD optical disk drives
J1
S26361-F3641-E8
Blu-ray Triple Writer SATA
S26361-F3266-E2
DVD-ROM
12x 3.5" configuration
with 1x 9.5mm bay
S26361-F3266-L2
S26361-F3641-L8
S26361-F3641-E6
Blu-ray Triple Writer ultra slim
S26361-F3641-L6
S26361-F3778-E1
S26361-F3778-L1
J2
Configurations
with min. 1x free 1.6" bay
DVD-RW supermulti ultra slim
K
6x BD-RW, 8x DVD,
24x CD, BD DL and
all CD/DVD formats
9.5mm, black bezel
max. 1x per system
all formats, DUAL/DL,
DVD-RAM only W2K,
W3K and Linux
9.5mm, black bezel
max. 1x per system
PRIMERGY TX2550 M4 offers up to 3x 1.6” bays (located in the upper side of Tower- / right side of Rack-server) for various ODD's and/or backup drives.
Depending on the HDD drive cage configuration there may be some or all of 1.6” bays already occupied; please find the number of available bays in
the chapter 6, "HD-cage", incl. further configuration details.
cnfgTX2550M4.xlsx ODD Page 18 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
Chapter 9 - backup drives
K
Config. with min. 1x free 1.6" bay
SAS HBA card for Internal LTO drives
8 ports 3, 6 & 12Gb/s SAS HBA Controller
based on LSI SAS3008 / for LTO drives.
1x
S26361-F3842-E20
S26361-F3842-L502
LTO drives (Need to select one of LTO drives togheter with SAS HBA)
PSAS CP400i SAS Contr.
LTO drives are not including tape drives. Cleaning Cartridge and Cables are included
LTO 5 tape drive (w/o tape)
1.5TB, 140MB/s, SAS 2.0, 5.25 inch/HalfHeight
1x
S26361-F3627-E1
S26361-F3627-L1
LTO 6 tape drive (w/o tape)
2.5TB, 160MB/s, SAS 2.0, 5.25 inch/HalfHeight
1x
S26361-F3787-E1
S26361-F3787-L1
LTO 7 tape drive (w/o tape)
6.0TB, 300MB/s, SAS 2.0, 5.25 inch/HalfHeight
1x
S26361-F5606-E1
S26361-F5606-E1
RDX drives
RDX drive is not including Cartridge.
RDX Drive cage (w/o cartriges)
USB 3.0, 5.25 inch / Half Height
1x
S26361-F3750-E4
S26361-F3750-L4
RDX
RDX Cartrridge
RDX Cartridge 500GB
-
-
S26361-F3857-L500
RDX Cartridge 1TB
-
-
S26361-F3857-L600
S26361-F3857-L800
RDX Cartridge 2TB
-
-
S26361-F3857-L700
L
RDX Cartridge 3TB
-
-
With most configurations the TX2550 M4 offers 3 x 1.6” bay in the accessible drives area located at the top of the Tower Server (or at the right side of
the Rack) for various ODD and or backup drives.
Depending on the HDD drive configuration there may be some or all of these 1.6” bays already occupied - please find the number of available bays
and the size listed as point 3) at each of the drive bundles. All bundles with limitations are highlighted with 2 exclamation marks in the front (e.g. "!!
1x 9.5mm ...")
cnfgTX2550M4.xlsx backup Page 19 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
as soon as available
S26361-F5701-E480
S26361-F5701-L480
960GB
2.5" (SFF)
SATA 6Gb/s
Read Intensive
0,9
as soon as available
S26361-F5701-E960
S26361-F5701-L960
1.92TB
2.5" (SFF)
SATA 6Gb/s
Read Intensive
0,9
as soon as available
S26361-F5701-E192
S26361-F5701-L192
3.84TB
2.5" (SFF)
SATA 6Gb/s
Read Intensive
1,0
as soon as available
S26361-F5701-E384
S26361-F5701-L384
7.68TB
2.5" (SFF)
SATA 6Gb/s
1,4
as soon as available
S26361-F5701-E240
S26361-F5701-L240
480GB
2.5" (SFF)
SATA 6Gb/s
Read Intensive
0,9
Read Intensive
0,5
as soon as available
S26361-F5701-E768
S26361-F5701-L768
max. 8x, 16x, 24x or 32x - depending on base unit & configuration
order code E-part
order code L-part
240GB
2.5" (SFF)
SATA 6Gb/s
Mixed Use
3,1
as soon as available
S26361-F5694-E240
S26361-F5694-L240
480GB
2.5" (SFF)
SATA 6Gb/s
Mixed Use
3,3
as soon as available
S26361-F5694-E480
S26361-F5694-L480
800GB
as soon as available
S26361-F5694-E192
S26361-F5694-L192
max. 8x, 16x, 24x or 32x - depending on base unit & configuration
2.5" (SFF)
SATA 6Gb/s
Mixed Use
3,6
S26361-F5675-E480
S26361-F5675-L480
240GB
2.5" (SFF)
SATA 6Gb/s
Mixed Use
3,6
S26361-F5675-E240
S26361-F5675-L240
480GB
Chapter 10 - storage drives
L
2.5" (SFF) SAS and SATA SSD
SSD SAS 2.5" Write Intensive (SFF) Enterprise with hot plug/hot replace tray
Capacity
Formfactor
Interface
Endurance
DWPD
order code E-part
order code L-part
SSD SAS 2.5" Mixed Use (SFF) Enterprise with hot plug/hot replace tray
Capacity
Formfactor
Interface
Endurance
DWPD
order code E-part
order code L-part
S26361-F5611-L160
SSD SATA 2.5" Mixed Use (SFF) Enterprise with hot plug/hot replace tray
Capacity
Formfactor
1.6TB
2.5" (SFF)
SAS 12Gb/s
Write Intensive
10
S26361-F5608-E160
S26361-F5608-L160
400GB
2.5" (SFF)
SAS 12Gb/s
Write Intensive
10
SED
S26361-F5611-E400
S26361-F5611-L400
960GB
2.5" (SFF)
SATA 6Gb/s
Mixed Use
3,0
as soon as available
S26361-F5694-E960
S26361-F5694-L960
1.92TB
2.5" (SFF)
SATA 6Gb/s
Mixed Use
3,0
400GB
2.5" (SFF)
SAS 12Gb/s
Write Intensive
10
S26361-F5608-E400
S26361-F5608-L400
800GB
2.5" (SFF)
SAS 12Gb/s
Write Intensive
10
S26361-F5608-E800
S26361-F5608-L800
max. 8x, 16x, 24x or 32x - depending on base unit & configuration
800GB
2.5" (SFF)
SAS 12Gb/s
Write Intensive
10
SED
S26361-F5611-E800
S26361-F5611-L800
1.6TB
2.5" (SFF)
SAS 12Gb/s
Write Intensive
10
SED
S26361-F5611-E160
Interface
Endurance
DWPD
order code E-part
order code L-part
max. 8x, 16x, 24x or 32x - depending on base unit & configuration
480GB
2.5" (SFF)
SAS 12Gb/s
Read Intensive
1
S26361-F5670-E480
S26361-F5670-L480
960GB
2.5" (SFF)
SAS 12Gb/s
Read Intensive
1
max. 8x, 16x, 24x or 32x - depending on base unit & configuration
SSD SATA 2.5" Read Intensive (SFF) Enterprise with hot plug/hot replace tray
Capacity
Formfactor
Interface
Endurance
DWPD
order code E-part
order code L-part
960GB
2.5" (SFF)
SATA 6Gb/s
Mixed Use
3
S26361-F5588-E960
S26361-F5588-L960
1.92TB
2.5" (SFF)
SATA 6Gb/s
Mixed Use
3
S26361-F5588-E192
S26361-F5588-L192
SSD SATA 2.5" Mixed Use S4600 (SFF) Enterprise with hot plug/hot replace tray
Capacity
Formfactor
Interface
Endurance
DWPD
2.5" (SFF)
SATA 6Gb/s
Read Intensive
1
S26361-F5632-E800
S26361-F5632-L800
960GB
2.5" (SFF)
SATA 6Gb/s
Read Intensive
1
S26361-F5632-E960
S26361-F5632-L960
240GB
2.5" (SFF)
SATA 6Gb/s
Read Intensive
1
S26361-F5632-E240
S26361-F5632-L240
480GB
2.5" (SFF)
SATA 6Gb/s
Read Intensive
1
S26361-F5632-E480
S26361-F5632-L480
max. 8x, 16x, 24x or 32x - depending on base unit & configuration
1.2TB
2.5" (SFF)
SATA 6Gb/s
Read Intensive
1
S26361-F5632-E120
S26361-F5632-L120
1.6TB
2.5" (SFF)
SATA 6Gb/s
Read Intensive
1
S26361-F5632-E160
S26361-F5632-L160
SSD SATA 2.5" Read Intensive (SFF) Enterprise with hot plug/hot replace tray
Capacity
Formfactor
Interface
Endurance
DWPD
order code E-part
order code L-part
240GB
2.5" (SFF)
SATA 6Gb/s
Read Intensive
M1
400GB
2.5" (SFF)
SAS 12Gb/s
Mixed Use
3
S26361-F5666-E400
S26361-F5666-L400
800GB
2.5" (SFF)
SAS 12Gb/s
Mixed Use
3
S26361-F5666-E800
S26361-F5666-L800
1.6TB
2.5" (SFF)
SAS 12Gb/s
Mixed Use
3
S26361-F5666-E160
S26361-F5666-L160
3.2TB
2.5" (SFF)
SAS 12Gb/s
Mixed Use
2,3
S26361-F5666-E320
S26361-F5666-L320
max. 8x, 16x, 24x or 32x - depending on base unit & configuration
SSD SAS 2.5" Read Intensive (SFF) Enterprise with hot plug/hot replace tray
Capacity
Formfactor
Interface
Endurance
DWPD
order code E-part
order code L-part
S26361-F5670-E384
S26361-F5670-L384
S26361-F5670-E960
S26361-F5670-L960
7.68TB
2.5" (SFF)
SAS 12Gb/s
Read Intensive
0,9
S26361-F5670-E768
S26361-F5670-L768
1.92TB
2.5" (SFF)
SAS 12Gb/s
Read Intensive
1
S26361-F5670-E192
S26361-F5670-L192
3.84TB
2.5" (SFF)
SAS 12Gb/s
Read Intensive
1
SAS drives and SATA drives can be mixed, but cannot be used in one logical RAID volume.
SAS drives require a dedicated SAS / RAID Controller
Hard Disk Sector Format Information:
512n HDD: 512 byte sectors on the drive media.
512e (e=emulation) HDD: 4K physical sectors on the drive media with 512 byte logical configuration.
512e HDD Disk Drives: VMware 6.0 or earlier is not supported.
512n & 512e HDDs can be mixed, but cannot be used in one logical RAID volume.
When using SSDs with VMware ESXi, select the SSDs that meet the endurance requirement described in
KB2145210 below.
https://kb.vmware.com/kb/2145210
DWPD: Drive Writes Per Day over 5 years.
SED (=Self Encrypting Drives) require either a RAID controller with ®SafeStore (SED) support or an HBA and
in addition a software instance, supporting SED Key Management.
It is strongly recommended to order SafeStore (SED) RAID controller with SED HDD or SSD devices for SafeStore
(SED) functionality.
HDD Classes:
Business-Critical (BC) -SATA=Nearline SATA Enterprise Drives / 7.2Krpm,SATA 6G.
Business-Critical (BC) -SAS=Nearline SAS Enterprise Drives / 7.2Krpm,SAS 12G .
Mission-Critical (MC)=SAS 10K and SAS 15K Enterprise Drives with max. performance and reliability.
Warranty:
SSD and SATA DOM have a built-in Wear-Out indicator. In this case the warranty for such a component, as an
exception to the system warranty, is restricted to the time period until the indicator reaches the exhaust level.
cnfgTX2550M4.xlsx HD_SSD Page 20 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
240GB
2.5" (SFF)
SATA 6Gb/s
Read Intensive
1,4
as soon as available
S26361-F5703-E240
S26361-F5703-L240
2TB
7 200
2x non-hot-plug HDD/SSD are available only with 12x3.5” configurations and will be mounted in the left side of the bottom/mid HD-cages in
the interior of the server; This option offers higher security i.e. for boot HDD/SSD, since only accessible if the Server housing is opened.
SATA 6Gb/s
Mixed Use
3,1
as soon as available
S26361-F5696-E240
S26361-F5696-L240
300GB
10 000
SAS 12Gb/s
512n
S26361-F5642-E130
S26361-F5642-L130
1.0TB
7 200
SATA 6Gb/s
512n
1TB
7 200
SAS 12Gb/s
512n
S26361-F5600-E100
S26361-F5600-L100
1TB
7 200
SAS 12Gb/s
512e
S26361-F5573-E100
S26361-F5573-L100
S26361-F5531-E545
RPM
Interface
Sector
15 000
SAS 12Gb/s
512n
15 000
SAS 12Gb/s
HDD SAS 2.5" 7.2K 512n (SFF) Enterprise Business Critical with hot plug/hot replace tray
Capacity
RPM
Interface
Sector
order code E-part
order code L-part
300GB
S26361-F5550-E130
S26361-F5550-L130
HDD SAS 2.5" 10K 512n (SFF) Enterprise Mission Critical with hot plug/hot replace tray
RPM
S26361-F5531-L530
300GB
S26361-F5531-E530
900GB
15 000
SAS 12Gb/s
512n
S26361-F5531-E590
S26361-F5531-L590
max. 8x, 16x, 24x or 32x - depending on base unit & configuration
Capacity
order code E-part
order code L-part
240GB
240GB
S26361-F5633-E240
S26361-F5633-L240
S26361-F5677-E240
S26361-F5677-L240
S26361-F3957-E100
S26361-F3957-L100
order code E-part
order code L-part
600GB
10 000
SAS 12Gb/s
512e
S26361-F5543-E160
S26361-F5531-E560
S26361-F5531-L560
SAS 12Gb/s
512n
S26361-F5531-L545
600GB
450GB
512n
15 000
Interface
Sector
10 000
SAS 12Gb/s
512n
max. 8x, 16x, 24x or 32x - depending on base unit & configuration
HDD SAS 2.5" 10K 512e (SFF) Enterprise Mission Critical with hot plug/hot replace tray
Capacity
Capacity
order code E-part
order code L-part
2.5" (SFF) Hard drives
HDD SAS 2.5" 15K (SFF) Enterprise Mission Critical with hot plug/hot replace tray
1.2TB
10 000
SAS 12Gb/s
512n
S26361-F5550-E112
S26361-F5550-L112
300GB
10 000
SAS 12Gb/s
512n
SED
S26361-F5581-E130
S26361-F5581-L130
600GB
10 000
SAS 12Gb/s
512n
S26361-F5550-E160
S26361-F5550-L160
900GB
10 000
SAS 12Gb/s
512n
S26361-F5550-E190
S26361-F5550-L190
S26361-F5543-L160
900GB
10 000
SAS 12Gb/s
512e
S26361-F5543-E190
S26361-F5543-L190
1.8TB
10 000
SAS 12Gb/s
512e
SED
S26361-F5582-E118
S26361-F5582-L118
600GB
10 000
SAS 12Gb/s
512n
SED
S26361-F5581-E160
S26361-F5581-L160
1.2TB
10 000
SAS 12Gb/s
512n
SED
S26361-F5581-E112
S26361-F5581-L112
RPM
Interface
Sector
max. 8x, 16x, 24x or 32x - depending on base unit & configuration
1.2TB
10 000
SAS 12Gb/s
512e
S26361-F5543-E112
S26361-F5543-L112
1.8TB
10 000
SAS 12Gb/s
512e
S26361-F5543-E118
S26361-F5543-L118
2.4TB
10 000
SAS 12Gb/s
512e
as soon as available
S26361-F5543-E124
S26361-F5543-L124
2.4TB
10 000
SAS 12Gb/s
512e
SED as soon as available
S26361-F5582-E124
S26361-F5582-L124
S26361-F5573-E200
S26361-F5573-L200
512n
S26361-F5600-E200
S26361-F5600-L200
max. 8x, 16x, 24x or 32x - depending on base unit & configuration
HDD SAS 2.5" 7.2K 512e (SFF) Enterprise Business Critical with hot plug/hot replace tray
Capacity
RPM
Interface
Sector
order code E-part
order code L-part
2TB
7 200
SAS 12Gb/s
SAS 12Gb/s
512e
1TB
7 200
SATA 6Gb/s
512n
S26361-F3956-E100
S26361-F3956-L100
2TB
7 200
SATA 6Gb/s
512n
S26361-F3956-E200
S26361-F3956-L200
max. 8x, 16x, 24x or 32x - depending on base unit & configuration
HDD SATA 2.5" 7.2K 512n (SFF) Enterprise Business Critical with hot plug/hot replace tray
Capacity
RPM
Interface
Sector
order code E-part
order code L-part
S26361-F3907-E200
S26361-F3907-L200
max. 8x, 16x, 24x or 32x - depending on base unit & configuration
HDD SATA 2.5" 7.2K 512e (SFF) Enterprise Business Critical with hot plug/hot replace tray
Capacity
RPM
Interface
Sector
order code E-part
order code L-part
1TB
7 200
SATA 6Gb/s
512e
S26361-F3907-E100
S26361-F3907-L100
2TB
7 200
SATA 6Gb/s
512e
max. 8x, 16x, 24x or 32x - depending on base unit & configuration
2.5" HDD for NON hot plug bays (internal)
2.5" NON hot plug Drives for internal bays
Capacity
order code E-part
order code L-part
2.5" SSD for NON hot plug bays (internal)
Capacity
Formfactor
Interface
Endurance
DWPD
order code E-part
order code L-part
2x non-hot-plug HDD/SSD are available only with 12x3.5” configurations and will be mounted in the left side of the bottom/mid HD-cages in
the interior of the server; This option offers higher security i.e. for boot HDD/SSD, since only accessible if the Server housing is opened.
2.5" (SFF)
SATA 6Gb/s
Mixed Use
3,6
2.5" (SFF)
SATA 6Gb/s
Read Intensive
1
RPM
Interface
Sector
240GB
2.5" (SFF)
M1
M2
cnfgTX2550M4.xlsx HD_SSD Page 21 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
8/10TB HDDs not released with PRAID EP540i (S26361-F4042-E4)
max. 4x, 8x, or 12x - depending on base unit & configuration
12TB
7 200
SATA 6Gb/s
512e
as soon as available
S26361-F3904-E120
S26361-F3904-L120
2.4TB
10 000
SAS 12Gb/s
512e
as soon as available
S26361-F5569-E124
S26361-F5569-L124
12TB
1.92TB
3.5" (LFF)
SATA 6Gb/s
Read Intensive
0,9
as soon as available
S26361-F5700-E192
S26361-F5700-L192
3.84TB
3.5" (LFF)
SATA 6Gb/s
Read Intensive
1,0
as soon as available
S26361-F5700-E384
S26361-F5700-L384
7.68TB
3.5" (LFF)
SATA 6Gb/s
Read Intensive
0,5
as soon as available
S26361-F5700-E768
S26361-F5700-L768
Read Intensive
1,4
as soon as available
S26361-F5700-E240
S26361-F5700-L240
480GB
3.5" (LFF)
SATA 6Gb/s
Read Intensive
0,9
as soon as available
S26361-F5700-E480
S26361-F5700-L480
960GB
3.5" (LFF)
SATA 6Gb/s
Read Intensive
0,9
as soon as available
S26361-F5700-E960
S26361-F5700-L960
order code E-part
order code L-part
max. 4x, 8x, or 12x - depending on base unit & configuration
1.92TB
3.5" (LFF)
SATA 6Gb/s
Mixed Use
3,0
as soon as available
S26361-F5692-E192
S26361-F5692-L192
SSD SATA 3.5" Mixed Use S4600 (LFF) 2.5" SSD Enterprise with 3.5" hot plug/hot replace tray
Capacity
Formfactor
Interface
Endurance
3,1
as soon as available
S26361-F5692-E240
S26361-F5692-L240
3.5" (LFF)
SATA 6Gb/s
Read Intensive
1
S26361-F5630-E480
S26361-F5630-L480
order code L-part
order code E-part
S26361-F5630-L960
S26361-F5692-E960
S26361-F5692-L960
7 200
SAS 12Gb/s
512e
as soon as available
S26361-F5571-E120
S26361-F5571-L120
12TB
7 200
SAS 12Gb/s
512e
SED as soon as available
S26361-F5624-E120
S26361-F5624-L120
300GB
S26361-F5568-E130
S26361-F5568-L130
480GB
3.5" (LFF)
SATA 6Gb/s
Mixed Use
3,3
as soon as available
S26361-F5692-E480
S26361-F5692-L480
S26361-F5673-L240
Interface
Endurance
DWPD
order code E-part
order code L-part
SSD SATA 3.5" Mixed Use (LFF) 2.5" SSD Enterprise with 3.5" hot plug/hot replace tray
3.5" (LFF) SATA SSD
Capacity
Formfactor
HDD SAS 3.5" 10K 512n (LFF) 2.5" HDD Enterprise Mission Critical with 3.5" hot plug/hot replace tray
RPM
Interface
Sector
10 000
240GB
3.5" (LFF)
SATA 6Gb/s
Mixed Use
3,6
S26361-F5673-E240
order code L-part
S26361-F5532-E545
S26361-F5532-L545
S26361-F5532-L560
order code E-part
order code L-part
600GB
order code E-part
7 200
SATA 6Gb/s
512n
max. 4x, 8x, or 12x - depending on base unit & configuration
Capacity
900GB
15 000
SAS 12Gb/s
512n
HDD SAS 3.5" 10K 512e (LFF) 2.5" HDD Enterprise Mission Critical with 3.5" hot plug/hot replace tray
Capacity
RPM
Interface
Sector
order code E-part
order code L-part
1.8TB
10 000
SAS 12Gb/s
max. 4x, 8x, or 12x - depending on base unit & configuration
480GB
3.5" (LFF)
SATA 6Gb/s
Mixed Use
3,6
S26361-F5673-E480
S26361-F5673-L480
S26361-F5630-L240
Capacity
Formfactor
Interface
Endurance
DWPD
600GB
10 000
SAS 12Gb/s
512n
S26361-F5568-E160
SAS 12Gb/s
512n
S26361-F5589-E960
S26361-F5589-L192
max. 4x, 8x, or 12x - depending on base unit & configuration
SSD SATA 3.5" Read Intensive (LFF) 2.5" SSD Enterprise with 3.5" hot plug/hot replace tray
1.92TB
3.5" (LFF)
SATA 6Gb/s
Mixed Use
3
S26361-F5589-L960
S26361-F5589-E192
960GB
3.5" (LFF)
SATA 6Gb/s
Mixed Use
3
240GB
3.5" (LFF)
SATA 6Gb/s
Mixed Use
DWPD
order code E-part
order code L-part
960GB
3.5" (LFF)
SATA 6Gb/s
Mixed Use
3,0
as soon as available
1.2TB
3.5" (LFF)
SATA 6Gb/s
Read Intensive
1
S26361-F5630-E120
S26361-F5630-L120
960GB
3.5" (LFF)
SATA 6Gb/s
Read Intensive
1
S26361-F5630-E960
240GB
3.5" (LFF)
SATA 6Gb/s
Read Intensive
1
S26361-F5630-E240
800GB
3.5" (LFF)
SATA 6Gb/s
Read Intensive
1
S26361-F5630-E800
S26361-F5630-L800
480GB
3.5" (LFF) Hard drives
HDD SAS 3.5" 15K (LFF) 2.5" HDD Enterprise Mission Critical with 3.5" hot plug/hot replace tray
RPM
Interface
Sector
300GB
15 000
SAS 12Gb/s
512n
S26361-F5532-E530
S26361-F5532-L530
Capacity
1.6TB
3.5" (LFF)
SATA 6Gb/s
Read Intensive
1
S26361-F5630-E160
S26361-F5630-L160
max. 4x, 8x, or 12x - depending on base unit & configuration
240GB
3.5" (LFF)
SATA 6Gb/s
SSD SATA 3.5" Read Intensive (LFF) 2.5" SSD Enterprise with 3.5" hot plug/hot replace tray
Capacity
Formfactor
Interface
Endurance
DWPD
512e
S26361-F5569-E118
S26361-F5569-L118
450GB
15 000
SAS 12Gb/s
512n
15 000
SAS 12Gb/s
512n
S26361-F5568-L160
1.2TB
10 000
SAS 12Gb/s
512n
S26361-F5568-E112
S26361-F5568-L112
S26361-F5532-E590
S26361-F5532-L590
S26361-F5532-E560
1TB
7 200
SAS 12Gb/s
512n
S26361-F5626-E100
S26361-F5626-L100
2TB
7 200
SAS 12Gb/s
512n
S26361-F5626-E200
S26361-F5626-L200
max. 4x, 8x, or 12x - depending on base unit & configuration
HDD SAS 3.5" 7.2K 512n (LFF) Enterprise Business critical with hot plug/hot replace tray
Capacity
RPM
Interface
Sector
order code E-part
order code L-part
Capacity
RPM
Interface
Sector
order code E-part
order code L-part
2TB
7 200
SAS 12Gb/s
512e
S26361-F5635-E200
S26361-F5635-L200
4TB
7 200
SAS 12Gb/s
512n
S26361-F5626-E400
S26361-F5626-L400
max. 4x, 8x, or 12x - depending on base unit & configuration
HDD SAS 3.5" 7.2K 512e (LFF) Enterprise Business Critical with hot plug/hot replace tray
8TB
7 200
SAS 12Gb/s
512e
S26361-F5571-E800
S26361-F5571-L800
10TB
7 200
SAS 12Gb/s
512e
S26361-F5571-E100
S26361-F5571-L100
4TB
7 200
SAS 12Gb/s
512e
S26361-F5635-E400
S26361-F5635-L400
6TB
7 200
SAS 12Gb/s
512e
S26361-F5635-E600
S26361-F5635-L600
S26361-F5636-L400
4TB
7 200
SATA 6Gb/s
512n
HDD SATA 3.5" 7.2K 512e (LFF) Enterprise Business Critical with hot plug/hot replace tray
max. 4x, 8x, or 12x - depending on base unit & configuration
HDD SATA 3.5" 7.2K 512n (LFF) Enterprise Business Critical with hot plug/hot replace tray
6TB
7 200
SAS 12Gb/s
512e
SED
S26361-F5584-E600
S26361-F5584-L600
10TB
7 200
SAS 12Gb/s
512e
SED
S26361-F5624-E100
S26361-F5624-L100
S26361-F5636-E100
S26361-F5636-L100
2TB
S26361-F5636-E200
S26361-F5636-L200
1TB
7 200
SATA 6Gb/s
512n
order code L-part
Capacity
Capacity
RPM
Interface
Sector
S26361-F3904-E100
S26361-F3904-L100
max. 4x, 8x, or 12x - depending on base unit & configuration
6TB
7 200
SATA 6Gb/s
512e
S26361-F5638-E600
S26361-F5638-L600
8TB
7 200
SATA 6Gb/s
512e
S26361-F3904-E800
S26361-F3904-L800
order code E-part
order code L-part
S26361-F5636-E400
M2
M3
10TB
7 200
SATA 6Gb/s
512e
max. 4x, 8x, or 12x - depending on base unit & configuration
RPM
Interface
Sector
order code E-part
cnfgTX2550M4.xlsx HD_SSD Page 22 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
2x M.2 drive for any Hypervisor by the onboard chipset Software RAID is not supported.
M.2 drive for VMware ESXi and for other OSs cannot be mixed
2x M.2 drive for any Hypervisor by the onboard chipset Software RAID is not supported.
max. 2x per Server; connector located on Motherboard (please see folder "description"). VMware is not supported.
Dual microSD and RDX Drive cage (S26361-F3750-E4) cannot be mixed
Dual microSD and M.2 drive cannot be mixed
Dual microSD offers Hardware-mirrored (RAID1) flash boot device for VMware ESXi, which cannot be supported by M.2.
vSAN can be booted in case ESXi host has 512 GB of memory or less. Even in case 512 GB or more, if vSAN is 6.5 or later, it can be
booted by resizing the coredump partition on ESXi hosts. For more information, see the VMware knowledge base article at
http://kb.vmware.com/kb/2147881.
2.5" PCIe-SSDs require a RAID Controller or PCIe retimer card.
RAID Controller : PRAID EP520i/540i/580i
PCIe retimer : PPCI CP x16 retimer
PCIe-SSD (occupies one PCIe slot)
S26361-F5650-L200 S26361-F5650-L400
S26361-F5650-E200 S26361-F5650-E400
PACC EP P4600 AIC 2TB PACC EP P4600 AIC 4TB
P4600 series, NVMe P4600 series, NVMe
3.0 DWPD
3.1 DWPD
PCIe3.0 x4, Low Profile
PCIe3.0 x4, Low Profile
max. 6x per system max. 6x per system
PCIe-SSD (occupies one PCIe slot)
S26361-F5697-L375 S26361-F5697-L750
S26361-F5697-E375 S26361-F5697-E750
PACC EP P4800X AIC 375GB PACC EP P4800X AIC 750GB
P4800X series, NVMe P4800X series, NVMe
30 DWPD 30 DWPD
as soon as available as soon as available
PCIe3.0 x4, Low Profile
PCIe3.0 x4, Low Profile
max. 4x per system max. 4x per system
240GB
M.2
SATA 6Gb/s
1,4
Boot
as soon as available
S26361-F5706-E240
S26361-F5706-L240
480GB
M.2
SATA 6Gb/s
1,4
Boot
as soon as available
S26361-F5706-E480
S26361-F5706-L480
N
PCIe-SSD 2.5" Mixed Use (SFF) Enterprise with hot plug/hot replace tray
2.5" (SFF) PCIe-SSD
M.2 SATA SSD
SSD SATA M.2 drive for booting, non hot-plug, for VMware ESXi
Capacity
Formfactor
M.2 drive is designed for use as a VMware ESXi boot drive.
Interface
Category
order code E-part
order code L-part
150GB
M.2
SATA 6Gb/s
Boot
S26361-F5655-E150
S26361-F5655-L150
AIC PCIe-SSD
M3
microSD
USB
Boot
150GB
M.2
SATA 6Gb/s
1,5
Boot
S26361-F5656-E150
S26361-F5656-L150
max. 1x per Server; connector located on Motherboard (please see folder "description"). VMware ESXi is only supported.
SSD SATA M.2 drive for booting, non hot-plug
Capacity
Formfactor
Interface
DWPD
Category
order code E-part
order code L-part
S26361-F4045-E64
S26361-F4045-L64
1.6TB
2.5" (SFF)
PCIe3.0 x4
Mixed Use
3,0
as soon as available
S26361-F5648-E160
S26361-F5648-L160
3.2TB
2.5" (SFF)
PCIe3.0 x4
Mixed Use
3,1
as soon as available
S26361-F5648-E320
S26361-F5648-L320
M.2 drive is designed for use as a boot drive with the Endurance Spec. above.
Capacity
Formfactor
Interface
Endurance
DWPD
order code E-part
order code L-part
Dual microSD
Dual microSD Enterprise for booting, non hot-plug, for VMware ESXi
Capacity
Formfactor
Interface
Category
PCIe-SSD Low Power 2.5" Read Intensive (SFF) Enterprise with hot plug/hot replace tray
Capacity
Formfactor
Interface
Endurance
DWPD
order code E-part
order code L-part
6.4TB
2.5" (SFF)
PCIe3.0 x4
Mixed Use
3,2
as soon as available
S26361-F5648-E640
S26361-F5648-L640
max. 4x - depending on base unit & configuration
S26361-F5649-L400
500GB
2.5" (SFF)
PCIe3.0 x4
Read Intensive
0,7
as soon as available
S26361-F5649-E50
S26361-F5649-L50
1TB
2.5" (SFF)
PCIe3.0 x4
Read Intensive
1,0
as soon as available
S26361-F5649-E100
S26361-F5649-L100
max. 4x - depending on base unit & configuration
2TB
2.5" (SFF)
PCIe3.0 x4
Read Intensive
0,6
as soon as available
S26361-F5649-E200
S26361-F5649-L200
4TB
2.5" (SFF)
PCIe3.0 x4
Read Intensive
0,6
as soon as available
S26361-F5649-E400
Dual microSD is designed for use as a VMware ESXi boot drive. Only the standardly equipped microSD are supported.
max. 1x per Server; connector located on Motherboard (please see folder "description"). VMware ESXi is only supported.
order code E-part
order code L-part
64GB
cnfgTX2550M4.xlsx HD_SSD Page 23 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
max number of some controllers can vary with base units with 6x card slots
optional 10Gb SFP+ module with LC connector for Fujitsu / Intel based controller
max. 4x (Dynamic LoM, X710-DA4), or 2x (Dynamic LoM, X710-DA2) SFP+ or Twinax Cable per controller
optional 10Gb SFP+ module with LC connector for Emulex controller
max. 2x SFP+ or Twinax Cable per controller
max. 6 Controller per system
N
customized cable length
(best fitting cable length is defined during rack
installation at the factory)
S26361-F3989-E600
see table at the botton of
this page
SFP+ active Twinax Cable Brocade
2x
S26361-F3873-E500
SFP+ passive Twinax Cable Cisco
2x
S26361-F4571-E500
10/1Gb Ethernet controller with SFP+ cage requires SFP+ modules or twinax cables, Fujitsu / Intel based)
PLAN EP OCe14102 2x 10GBase-T
6x
2 port NIC with RDMA, Emulex
S26361-F5557-E1
S26361-F5557-L501
PLAN EP X710-DA2 2x10Gb SFP+
4x
S26361-F3640-E2
S26361-F3640-L502
Dual rate 10G/1G support requires 10G/1G Dual Rate SFP+ Optical Transceiver Modules
2 port NIC, Intel X710-DA2 (Fortville)
10Gb Ethernet network components
10Gb Ethernet controller with RJ45 interface (10GBASE-T)
max. 6 Controller per system
PLAN EP X550-T2 2x10GBASE-T
6x
2 port 10 Gbit Intel X550-T2 (Sageville)
S26361-F3948-E2
S26361-F3948-L502
PLAN CP 2x1Gbit Cu Intel I350-T2
6x
2 port, Intel
S26361-F4610-E2
S26361-F4610-L502
PLAN CP 4x1Gbit Cu Intel I350-T4
6x
4 port, Intel
S26361-F4610-E4
S26361-F4610-L504
Chapter 11 - LAN Components
Default: 2x RJ45 1GbE ports on systemboard
Dynamic LoM OCP PHY interface cards
S26361-F3953-E210
S26361-F3953-L210
1Gb Ethernet network components
1Gb Ethernet controller with RJ45 interface (1000BASE-T)
Interface card to provide the external connectors for on-board LAN
PLAN EM 2x 10Gb T OCP interface Intel
2x RJ45 plug for 10GBASE-T
PLAN EM 2x 10GB SFP+ OCP interface Intel
2x SFP+ plugs for twinax or modules
for SFP modules and cables see below
S26361-F3953-E211
S26361-F3953-L211
max. 1x per system; OCP cards block PCIe slot 8;
OCP carrier card for retrofit
upgrade with OCP interface
cards
S26361-F3953-L21
2x .. 4x
S26361-F3873-E500
SFP+ passive Twinax Cable Cisco - Sold Out
2x .. 4x
SFP+ Optical Transceiver 10G Single Rate SR
2x .. 4x
LC, MMF / SR SFP+ module, up to 400m, Finisar
S26361-F3986-E3
S26361-F3986-L3
SFP+ Optical Transceiver 10G Single Rate LR
2x .. 4x
LC, SMF / LR SFP+ module, up to 10km, Finisar
S26361-F3986-E4
SFP+ Optival Transceiver 10G/1G Dual Rate SR
2x .. 4x
LC, MMF / SR SFP+ module, up to 400m, Intel
S26361-F3986-E5
S26361-F3986-L5
SFP+ Optical Transceiver 10G/1G Dual Rate LR
2x .. 4x
LC, SMF / LR SFP+ module, up to 10km, Intel
S26361-F3986-E6
S26361-F3986-L6
S26361-F5536-E2
S26361-F5536-L502
6x
2 port NIC with RDMA, Emulex
10Gb Ethernet controller with SFP+ interface (for SFP+ modules or twinax cables, Emulex)
PCNA EP OCe14102 2x 10Gb
6x
2 port CNA with FCoE & RDMA, Emulex
S26361-F5250-E1
S26361-F5250-L501
PCNA SFP+ MMF Modul OCe14102
2x
MMF / SR SFP+ module, up to 400m, Emulex
S26361-F5250-E110
S26361-F5250-E110
Twinax Anschlussplatz Primergy
2x
virtual connector for twinax cables
V:TWX CONNECTOR-PY
SFP+ active Twinax Cable Fujitsu
2x
PLAN EP X710-DA4 4x10Gb SFP+
4x
4 port NIC, Intel X710-DA4 (Fortville)
S26361-F3640-E4
S26361-F3640-L504
Twinax Anschlussplatz Primergy
2x .. 4x
virtual connector for twinax cables
V:TWX CONNECTOR-PY
SFP+ active Twinax Cable Fujitsu
2x .. 4x
customized cable length
(best fitting cable length is defined during rack
installation at the factory)
S26361-F3989-E600
see table at the botton of
this page
SFP+ active Twinax Cable Brocade
S26361-F3986-L4
S26361-F4571-E500
PLAN EP OCe14102 2x10Gb
cnfgTX2550M4.xlsx LAN Page 24 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
25/10Gb Ethernet controller with 2x SFP28 cages (requires twinax cables or optical transceiver SFP28 or SFP+ modules)
Optional, 25Gb SFP28 Optical Transceiver module with LC connector for PLAN EP QL41212 25Gb 2p SFP28
Max. 2x SFP28 or DAC/AOC Cable per PLAN EP QL41212 25Gb 2p SFP28
Optional, 10Gb SFP+ Optical Transceiver module with LC connector for PLAN EP QL41212 25Gb 2p SFP28
SFP+ active Twinax Cable - Brocade 2x S26361-F3873-E500
max. 2x SFP+ or Twinax Cable per PLAN EP QL41212 25Gb 2p SFP28
max. 6x PLAN EP QL41212 25Gb 2p SFP28
25/10Gb Ethernet controller with 2x SFP28 cages (requires twinax cables or optical transceiver SFP+ modules)
optional 25Gb SFP28 module with LC connector for Fujitsu / Intel / Qlogic based controller
max. 2x SFP28 Twinax Cable per controller
optional 10Gb SFP+ module with LC connector for Fujitsu / Intel / Qlogic based controller
max. 2x SFP+ or Twinax Cable per controller
max. 2 Controller per system
25/10Gb Ethernet controller with 2x SFP28 cages (requires twinax cables or optical transceiver SFP28 or SFP+ modules)
Optional, 25Gb SFP28 Optical Transceiver module with LC connector for PLAN EP MCX4-LX 25Gb 2p SFP28
Max. 2x SFP28 or DAC/AOC Cable per PLAN EP MCX4-LX 25Gb 2p SFP28
max. 6x PLAN EP MCX4-LX 25Gb 2p SFP28
25/10Gb Ethernet network components
Dual speed support, auto-sense - supports 25Gbps and 10Gbps line rate per-port.
Note: This is not the most current product. The successor product is PLAN EP QL41212.
PLAN EP QL45212 2x25Gb
2x
Dual Port NIC, RoCE RDMA, WS2016, Cavium
S26361-F5622-E2
S26361-F5622-L502
virtual connector for twinax cables
2x
virtual connector for twinax cables
V:TWX CONNECTOR-PY
SFP28 Twinax Cable Fujitsu
2x
customized cable length
(best fitting cable length is defined during rack
installation at the factory)
future
future
SFP+ Transceiver Module MMF 10GbE LC
future
SFP+ Transceiver Module SMF 10GbE LC
2x
SMF / LR SFP+ module, up to 10km
S26361-F3986-E4
S26361-F3986-L4
virtual connector for twinax cables
2x
virtual connector for twinax cables
V:TWX CONNECTOR-PY
Dual speed support, auto-sense - supports 25Gbps and 10Gbps line rate per-port
PLAN EP MCX4-LX 25Gb 2p SFP28 FH
6x
Dual Port NIC, RoCE RDMA, Mellanox
S26361-F4054-E2
S26361-F4054-L502
SFP+ active Twinax Cable Fujitsu
2x
customized cable length
(best fitting cable length is defined during rack
installation at the factory)
S26361-F3989-E600
see table at the botton of
this page
SFP+ active Twinax Cable Brocade
2x
S26361-F3873-E500
S26361-F3986-E3
S26361-F3986-L3
SFP28 Twinax Cable Brocade
2x
2x
MMF / SR SFP+ module, up to 400m
SFP28 Optical Transceiver 25G SR MMA2P00-AS LC
2x
MMF / SR SFP28 module, Mellanox.
Max reach supported 100m
S26361-F4054-E701
S26361-F4054-L701
"Virtual Connector" for DAC/AOC cables
2x
Enablement for System Architect
V:DAC/AOC-CONNECTOR-25
25G DAC - Cisco
2x
DAC are not in Fujitsu's portfolio yet. Thus, test only
and purchase from switch vendors.
25G DAC - Mellanox
2x
25G AOC - Cisco
2x
AOC are not in Fujitsu's portfolio yet. Thus, test only
and purchase from switch vendors.
25G AOC - Mellanox
2x
Dual speed support, auto-sense - supports 25Gbps and 10Gbps line rate per-port
PLAN EP QL41212 25Gb 2p SFP28 FH
6x
Dual Port NIC, iWARP & RoCE RDMA, Cavium
S26361-F4056-E2
S26361-F4056-L502
SFP28 Optical Transceiver 25G SR MMA2P00-AS LC
2x
MMF / SR SFP28 module, Mellanox.
Max reach supported 100m
S26361-F4054-E701
S26361-F4054-L701
"Virtual Connector" for DAC/AOC cables
2x
Enablement for System Architect
V:DAC/AOC-CONNECTOR-25
SFP28 Optical Transceiver 25G SR E25GSFP28SR
2x
MMF / SR SFP28 module, Intel.
Max reach supported 100m
S26361-F4055-E701
S26361-F4055-L701
25G DAC - Cisco
2x
DAC are not in Fujitsu's portfolio yet. Thus, test only
and purchase from switch vendors.
25G DAC - Mellanox
2x
25G AOC - Cisco
2x
AOC are not in Fujitsu's portfolio yet. Thus, test only
and purchase from switch vendors.
25G AOC - Mellanox
2x
SFP+ Optical Transceiver 10G Single Rate SR
2x
LC, MMF / SR SFP+ module, up to 400m
S26361-F3986-E3
S26361-F3986-L3
SFP+ Optical Transceiver 10G Single Rate LR
2x
LC, SMF / LR SFP+ module, up to 10km
S26361-F3986-E4
S26361-F3986-L4
"Virtual Connector" for Twinax cables
2x
Enablement for System Architect
V:TWX CONNECTOR-10
SFP+ active Twinax Cable - Fujitsu
2x
customized cable length
(best fitting cable length is defined during rack
installation at the factory)
S26361-F3989-E600
see table at the botton of
this page
SFP+ active Twinax Cable Brocade
2x
cnfgTX2550M4.xlsx LAN Page 25 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
25/10Gb Ethernet controller with 2x SFP28 cages (requires twinax cables or optical transceiver SFP28 or SFP+ modules)
Optional, 25Gb SFP28 Optical Transceiver module with LC connector for PLAN EP XXV710-DA2
Max. 2x SFP28 or DAC/AOC Cable per PLAN EP XXV710-DA2.
Optional, 10Gb SFP+ Optical Transceiver module with LC connector for PLAN EP XXV710-DA2
SFP+ active Twinax Cable - Brocade 2x S26361-F3873-E500
max. 2x SFP+ or Twinax Cable per controller
max. 6 Controllers per system
40Gb Ethernet controller with QSFP cage (requires DAC, AOC cables or optical transceiver QSFP modules)
Optional, 40Gb QSFP Optical Transceiver module with MPO connector for PLAN EP MCX4-EN 40Gb 2p QSFP
rmax. 2x QSFP or DAC, AOC per PLAN EP MCX4-EN 40Gb 2p QSFP
max. 6x PLAN EP MCX4-EN 40Gb 2p QSFP
100Gb Ethernet controller with 1x QSFP28 cage (requires twinax cables or optical transceiver QSFP28 modules)
Optional, 100Gb QSFP28 Optical Transceiver module with MPO connector for PLAN EP QL45611 100Gb 1p QSFP28
Max. 1x QSFP28 or DAC/AOC Cable per PLAN EP QL45611 100Gb 1p QSFP28
max. 6x PLAN EP QL45611 100Gb 1p QSFP28
"Virtual Connector" for Twinax cables
2x
Enablement for System Architect
V:TWX CONNECTOR-10
SFP+ active Twinax Cable - Fujitsu
2x
customized cable length
(best fitting cable length is defined during rack
installation at the factory)
S26361-F3989-E600
see table at the botton of
this page
SFP+ active Twinax Cable Brocade
2x
SFP+ Optical Transceiver 10G Single Rate SR
2x
LC, MMF / SR SFP+ module, up to 400m
S26361-F3986-E3
S26361-F3986-L3
SFP+ Optical Transceiver 10G Single Rate LR
2x
LC, SMF / LR SFP+ module, up to 10km
S26361-F3986-E4
S26361-F3986-L4
SFP+ Optical Transceiver 10G/1G Dual Rate SR
2x
LC, MMF / SR SFP+ module, up to 400m
S26361-F3986-E5
S26361-F3986-L5
SFP+ Optical Transceiver 10G/1G Dual Rate LR
2x
LC, SMF / LR SFP+ module, up to 10km
S26361-F3986-E6
S26361-F3986-L6
25G AOC - Brocade
2x
AOC are not in Fujitsu's portfolio yet. Thus, test only
and purchase from switch vendors.
25G AOC - Cisco
2x
25G AOC - Intel
2x
"Virtual Connector" for DAC/AOC cables
2x
Enablement for System Architect
V:DAC/AOC-CONNECTOR-25
25G DAC - Brocade
2x
DAC are not in Fujitsu's portfolio yet. Thus, test only
and purchase from switch vendors.
25G DAC - Cisco
2x
25G DAC - Intel
2x
2x
MMF / SR SFP28 module, Intel.
Max reach supported 30m
S26361-F4055-E701
S26361-F4055-L701
SFP28 Optical Transceiver 25G SR MMA2P00-AS LC
2x
MMF / SR SFP28 module, Mellanox.
Max reach supported 100m
S26361-F4054-E701
S26361-F4054-L701
40/10Gb Ethernet network components
Supports 40Gbps line rate per-port
PLAN EP MCX4-EN 40Gb 2p QSFP FH
6x
Dual Port NIC, RoCE RDMA, Mellanox
S26361-F4053-E2
S26361-F4053-L502
Multiple speed support, auto-sense - supports 25Gbps, 10Gbps and 1Gbps line rate per-port
PLAN EP XXV710-DA2 2x25Gb FH
6x
Dual Port NIC, Intel
S26361-F4055-E2
S26361-F4055-L502
SFP28 Optical Transceiver 25G SR E25GSFP28SR LC
QSFP 40G SR4L MPO 850nm 30m MC2210411-SR4L
2x
MMF / SR4L QSFP module, Mellanox. Max reach
supported 30m
S26361-F4053-E701
S26361-F4053-L701
QSFP 40G SR4 MPO 850nm 150m MC2210411-SR4
2x
MMF / SR4 QSFP module, Mellanox. Max reach
supported 150m
S26361-F4053-E702
S26361-F4053-L702
"Virtual Connector" for DAC/AOC cables
2x
Enablement for System Architect
V:DAC/AOC-CONNECTOR-40
40G DAC - Cisco
2x
DAC are not in Fujitsu's portfolio yet. Thus, test only
and purchase from switch vendors.
40G DAC - Mellanox
2x
100Gb Ethernet network components
40G AOC - Cisco
2x
AOC are not in Fujitsu's portfolio yet. Thus, test only
and purchase from switch vendors.
40G AOC - Mellanox
2x
Supports 100Gbps line rate
PLAN EP QL45611 100Gb 1p QSFP28 FH
6x
Single Port NIC, RoCE RDMA, Cavium
S26361-F4057-E1
S26361-F4057-L501
QSFP28 100G SR4 MPO 850nm 100m MMA1B00-
C100D
1x
MMF / SR4 QSFP28 module, Mellanox. Max reach
supported 100m
S26361-F4052-E701
S26361-F4052-L701
QSFP28 100G PSM4 1310nm 500m MMS1C10-CM
1x
MMF / SR QSFP28 module, Mellanox. Max reach
supported 500m
S26361-F4052-E801
S26361-F4052-L801
"Virtual Connector" for DAC/AOC cables
1x
Enablement for System Architect
V:DAC/AOC-CONNECTOR-100
100G AOC - Cisco
1x
AOC are not in Fujitsu's portfolio yet. Thus, test only
and purchase from switch vendors.
100G AOC - Mellanox
1x
100G DAC - Cisco
1x
DAC are not in Fujitsu's portfolio yet. Thus, test only
and purchase from switch vendors.
100G DAC - Mellanox
1x
cnfgTX2550M4.xlsx LAN Page 26 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
100Gb Ethernet controller with 1x QSFP28 cage (requires twinax cables or optical transceiver QSFP28 modules)
Optional, 100Gb QSFP28 Optical Transceiver module with MPO connector for PLAN EP MCX4-EN 100Gb 1p QSFP28
Max. 1x QSFP28 or DAC/AOC Cable per PLAN EP MCX4-EN 100Gb 1p QSFP28
max. 6x PLAN EP MCX4-EN 100Gb 1p QSFP28
Q
Q
R
SFP+ active Twinax Cable Brocade 3m
S26361-F3873-L503
SFP+ active Twinax Cable Brocade 5m
S26361-F3873-L505
Brocade active SFP+ Twinax 10Gb cable
SFP+ active Twinax Cable Brocade 1m
S26361-F3873-L501
SFP+ active Twinax Cable Fujitsu 5m
S26361-F3989-L105
SFP+ active Twinax Cable Fujitsu 10m
S26361-F3989-L110
Network cables for later upgrade
Fujitsu active SFP+ Twinax 10Gb cable
SFP+ active Twinax Cable Fujitsu 2m
S26361-F3989-L102
Supports 100Gbps line rate
PLAN EP MCX4-EN 100Gb 1p QSFP28 FH
6x
Single Port NIC, RoCE RDMA, Mellanox
S26361-F4052-E1
S26361-F4052-L501
1x
QSFP28 100G SR4 MPO 850nm 100m MMA1B00-
C100D
1x
MMF / SR4 QSFP28 module, Mellanox. Max reach
supported 100m
S26361-F4052-E701
S26361-F4052-L701
QSFP28 100G PSM4 1310nm 500m MMS1C10-CM
1x
MMF / SR QSFP28 module, Mellanox. Max reach
supported 500m
S26361-F4052-E801
S26361-F4052-L801
100G AOC - Cisco
1x
AOC are not in Fujitsu's portfolio yet. Thus, test only
and purchase from switch vendors.
100G AOC - Mellanox
1x
"Virtual Connector" for DAC/AOC cables
1x
Enablement for System Architect
V:DAC/AOC-CONNECTOR-100
100G DAC - Cisco
1x
DAC are not in Fujitsu's portfolio yet. Thus, test only
and purchase from switch vendors.
100G DAC - Mellanox
cnfgTX2550M4.xlsx LAN Page 27 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
max number of some controllers can vary with base units with 6x card slots
P
max. 6 Controller per system (mixed configurations are supported)
Chapter 13 - Infiniband Controllers
PFC EP LPe32000 1x 32Gb
4x
1 port, full height, Broadcom/Emulex
S26361-F4044-E1
S26361-F4044-L501
PFC EP QLE2742 2x 32Gb
6x
2 ports, full height, Cavium/Qlogic
S26361-F4043-E2
S26361-F4043-L502
PFC EP QLE2740 1x 32Gb
6x
1 port, full height, Cavium/Qlogic
S26361-F4043-E1
S26361-F4043-L501
16Gb Fibre Channel controller generation 6 with LC interface for 50µm optical cables (OM4 or OM3)
These components ship with optical transceiver modules equipped for all ports. Supported line rates: 16, 8, and 4Gbps.
PFC EP LPe31002 2x 16Gb
max. 6 Controller per system (mixed configurations are supported)
6x
2 ports, full height, Broadcom/Emulex
S26361-F5596-E2
S26361-F5596-L502
Chapter 12 - Fibre Channel Controller
R
32Gb Fibre Channel controller generation 6 with LC interface for 50µm optical cables (OM4 or OM3)
These components ship with optical transceiver modules equipped for all ports. Supported line rates: 32, 16, and 8Gbps.
PFC EP LPe32002 2x 32Gb
4x
2 ports, full height, Broadcom/Emulex
S26361-F4044-E2
S26361-F4044-L502
PFC EP QLE2692 2x 16Gb
6x
2 ports, full height, Cavium/Qlogic
S26361-F5580-E2
S26361-F5580-L502
PFC EP QLE2690 1x 16Gb
6x
1 port, full height, Cavium/Qlogic
S26361-F5580-E1
S26361-F5580-L501
PFC EP LPe31000 1x 16Gb
6x
1 port, full height, Broadcom/Emulex
S26361-F5596-E1
S26361-F5596-L501
Infiniband and Omni path controller will be relased by Project Release Only
cnfgTX2550M4.xlsx FC_IB Page 28 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
T26139-Y1742-E10/L10
Must for delivery to India
S26361-F3301-E120
Certification for China (CCC)
! China cable or "no powercord"
Must for delivery to China
max. 1x per system
1200W PSU platinum; 1st or 2nd
PSU for redundancy; 94% efficiency;
110V range: 1000W, <110V:900W;
T26139-Y1745-E10/L10
T26139-Y1746-E10/L10
T26139-Y1757-E10/L10
100-240V, 50-60Hz
occupies hot plug PSU slot
min. 1 / max. 2x per system
USA, Canada
D, A, B, F, NL, FIN, N, S, E, P, RUS, TR
Power cord option for Tower Server, 1.8m, black (1x per PSU)
T26139-Y1740-E10/L10
Taiwan
Denmark
Italy
UK, IR
Switzerland
S26113-F574-L13
S26113-F615-L10
220-240V only, 50-60Hz
occupies hot plug PSU slot
T26139-Y1743-E10
occupies hot plug PSU slot
min. 1 / max. 2x per system
800W PSU platinum; 1st or 2nd PSU
for redundancy; 94% efficiency
Powercord for rack, IEC 320 C14 connector
T26139-Y1968-E100
T26139-Y1742-E10
100-240V, 50-60Hz
occupies hot plug PSU slot
min. 1 / max. 2x per system
min. 1 / max. 2x per system
450W PSU platinum; 1st or 2nd PSU
for redundancy; 94% efficiency
S26113-F615-E10
S26113-F575-E13
S26113-F574-E13
Chapter 14 - Power supply unit, power cable, country specific options
P
S26113-F616-E10
1200W platinum power supply unit
S26113-F575-L13
Q
USA, Canada, 1.8m, grey
S26361-F3301-E123
S26361-F1452-E130
Power cord option for Tower Server, 2.5m, black (1x per PSU)
Certification for India
max. 1x per system
Region Kit Americas
max. 1x per system
max. 1x per system
S26361-F1452-E100
S26113-F616-L10
450W platinum power supply unit
800W platinum power supply unit
800W titanium power supply unit
800W PSU titanium; 1st or 2nd PSU
for redundancy; 96% efficiency
100-240V, 50-60Hz
max. 1x per system
! Only with "no powercord option"
Israel
Tower
T26139-Y1744-E10/L10
T26139-Y1751-E10/L10
T26139-Y3850-E10
T26139-Y1747-E18/L18
Region Kit APAC/EMEA/India
S26361-F1452-E140
Region Kit Europe
Rack
Power cord option for Rack Server, 4m, grey (1x per PSU)
no powercord
China
Dummy module instead of PSU in case only PSU is equipped;
Dummy module: S26113-F574-E99, max. 1x per system
Optional power backplane (in chapter 16 -
others) is required for 2x PSU (redundancy).
cnfgTX2550M4.xlsx PSU Page 29 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
http://www.fujitsu.com/fts/products/computing/peripheral/accessories/index-facts.html
USB Optical Disc Drive
External Ultra Slim Portable DVD Writer (Hitachi-LG)
S26341-F103-L142
R
S26381-K341-E180
Spain
S26381-K521-E180
S26381-K341-E185
Italy
S26381-K521-E185
S26381-K341-E165
United Kingdom
S26381-K521-E165
S26381-K341-E170
Switzerland
S26381-K521-E170
S26381-K341-E140
France
S26381-K521-E140
S26381-K341-E154
Sweden / Finland
S26381-K521-E154
S26381-K341-E120
Germany
S26381-K521-E120
S26381-K341-E122
Germany / Int
S26381-K521-E122
S26381-K341-E104
Czech/Slovak
S26381-K521-E104
S26381-K341-E110
US 104 keys (US keyboard + US layout)
S26381-K521-E110
US/ int 105 keys (UK keyboard + US int. Layout)
S26381-K521-E102
USB sticks (FOR PROJECTS ONLY) - no standard release
ADATA USB 3.0 Flash Stick UE700 – 32GB
S26391-F6048-L332
ADATA USB 3.0 Flash Stick UE700 – 64GB
S26391-F6048-L364
USB Keyboards for Tower Servers for following countries:
USB professional Keyboard KBPC PX ECO
Country version
FUJITSU Keyboard KB521 USB (grey)
Mouse M520 Grey
S26381-K467-E101
S26381-K467-L101
Mouse M530 Grey
n/a
S26381-K468-L101
Mouse M530 Black
n/a
S26381-K468-L100
Chapter 15 - Accessories
Q
USB Mouse:
Mouse M520 Black
S26381-K467-E100
S26381-K467-L100
Please find the layout of all Fujitsu keyboards here:
http://abg0355a.abg.fsc.net/
cnfgTX2550M4.xlsx USB devices Page 30 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
S26361-F1790-E311
embedded Lifecycle Management (eLCM)
Loose delivery
Server Online Update eLCM Activation Pack
OS driver Update (Node Locked License)
Hardware firmware update
BDL:ELCM-PACK
Server Offline Update
options contains:
Hardware update via Update Manager Express - 16GB SD card
PrimeCollect - Paper with TAN for Licensekey
Autonomous creation of Primecollect archives
Creation and use of PrimeCollect archives over AIS connect
Custom Image (Jukebox function)
Automatic and manual download of CD and DVD Images
Automatic and manual start of CD and DVD Images
max. 1x per system
Chapter 16 - others
max. 1x per system
R
S26361-F1790-E243
iRMC S4/S5 advanced pack
integrated remote Management controller activation key for
graphical console redirection and remote media redirection
S26361-F3699-E20
S26361-F3699-L20
Redundant power supply
Riser card for 2x PCIe + 1x PCI32 slots
Occupies slot 4 (PCIe-x16) and instead offers
2x PCIe-x8 + 1x PCI32 slots for full height cards.
max. 1x per system
Power backplane for redundant power supply
units. This option is condition for configurations
with 2 power supplies.
It contains a power backplane and cables.
max. 1x per system
S26361-F3846-E134
S26361-F3846-L134
S26361-F1790-L244
cnfgTX2550M4.xlsx others Page 31 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
Your server is ready
S26361-F3776-E440
Cool-safe ® Advanced Thermal design 40°C
enables the PRIMERGY Server to cope with temperatures from
5-40° in operating mode due to extended Fan settings
Serial port / RS232-C interface
Serial port mounted at system rear side, connected via cable
max. 1x per system
this setting can be activated ex factory only
max. 1x per system
S26361-F3120-E3
S26361-F3120-L3
Trusted Platform Module 2.0
S26361-F3552-E101
PY TX2550 M4 Tower 4x3.5' basic and
PY TX2550 M4 Tower 8x2.5' basic do
not support ATD options!
Trusted Platform Module 1.2
max. 1x per system
enables the PRIMERGY Server to cope with temperatures from
5-45° in operating mode due to extended Fan settings
this setting can be activated ex factory only
max. 1x per system
S26361-F3552-E100
S26361-F3552-L100
max. 1x per system
Cool-safe ® Advanced Thermal design 45°C
S26361-F3776-E445
Advanced Thermal Design is not available with LTO drives.
With our made4you service we fulfill any
individual requirement and wish of our
customers perfectly
- e.g.
> special hardware configurations,
> staging services ex factory,
> extended lifecycle management,
> customer specific logos, component,
> BIOS fixes and many more.
For further information please contact us
Fujitsu Portfolio
Build on industry standards, Fujitsu offers a full portfolio of IT hardware and software products, services,
solutions and cloud offering, ranging from clients to datacenter solutions and includes the broad stack of Business
Solutions, as well as the full stack of Cloud offering. This allows customers to leverage from alternative sourcing
and delivery models to increase their business agility and to improve their IT operation’s reliability
You would like to add some customer specific solutions?
This serial port option is dedicated for several PRIMERGY Servers
and will be delivered with full height and low profile brackets,
which are not required for PRIMERGY TX2550 M4.
cnfgTX2550M4.xlsx others Page 32 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
RAID
07.08.2017 RAM
25.09.2017
base
rack conversion kit changed to S26361-F1729-L290
Expander hints adjusted
27.09.2017
HD_SSD / S26361-F5650-E640/L640
removed
19.10.2017
Xeon Gold 6100M CPU ..-E334/340/342
removed
20.10.2017
HD_SSD / S26361-F4045-E64
26.10.2017
FC_IB
Added: PLAN EP MCX4-Lx/EN 25,40,100GbE
Update of memory mirrored mode description
20.07.2017
06.10.2017
DVD-RW S26361-F3269-E2/-L2
removed
2&.09.2017
Raid page
add comments, increase to 2x RAID + HBA for mirrored mode
added / F5588/F5589-E240/E480 removed
HD_SSD / F5677-E240 / F5648-* / PCIe SSD
added / codes modified / DWPD corrected
25.09.2017
HD drive cage
Riser card option and redundancy option added
30.03.2017
S26361-F5243-E14/L14
comment added
order codes and specifications added
20.02.2017
PFC, PLAN
Correction: LP components deleted
07.02.2017
HD_SSD / SED / S26361-F5632-L240
note for SED updated / order code corrected
14.02.2017
LOM
update IB
02.08.2017
LAN
24.07.2017
HD_SSD / F5673/F5675-* / F5531/F5532-E590
LAN
Others
RAM
14.02.2017
PFC
FIRST DRAFT RELEASE
PRIMERGY TX2550 M4
21.12.2016
CPU
Update
T26139-Y1747-E18/L18
Added power cord for Israel
03.11.2016
S26341-F103-L140
14.12.2016
RAID
add new raid controllers + retimer card
14.12.2016
add EDR
changed to new USB Optical Disc Drive
10.11.2016
24.11.2016
Update
06.01.2017
HD_SSD / S26361-F5588/F5589-E120/L120
Reviewed
HD_SSD
removed
Folder / order code / description
Date of change
What has been changed / comment
27.12.2016
updated
28.10.2016
22.12.2016
RAM
Update
22.12.2016
RAM
RAM
03.02.2017
13.01.2017
Backup drive (LTO/RDX)
updated
LAN
30.03.2017
Color yellow --> light green for LAN register
Mirrored Channel Mode updated
20.01.2017
HD_SSD / S26361-F5642/F5648/F5649/F5650-*
added
09.05.2017
S26361-F3552-E101
descriptions of FBU options changed
Aligned to Copmponent PAP
Mirrored Channel Mode text modified
28.03.2017
PRAID EP520i, 540i, 580i
CacheCade deleted
14.02.2017
PLAN
Aligned to Copmponent PAP
27.03.2017
HD_SSD / S26361-F5583-* / F5648-*
removed / Capacity changed
27.03.2017
HD_SSD / Note / M.2 SSD
Aligned to System PM Decision
16.02.2017
02.08.2017
LAN
Deleted: PLAN AP 1x1Gbit Cu Intel I210-T1
06.06.2017
HD_SSD / F5666/F5670-* / F5614/F5617-*
Note updated / added / removed
07.06.2017
CPU
loose components added
changed to S26361-F5243-L115/S26361-F4042-L110
S26361-F5243-L110/S26361-F4042-L110
29.06.2017
Added: 10GbE Ethernet adapter X710-DA4 4-Port, Intel
13.06.2017
20.07.2017
12.07.2017
info-text added
RAID
info-text updated
12.04.2017
CPU
updated
16.03.2017
23.02.2017
eLCM
PLAN EP QL45212
USB devices
Added HLDS ODD
27.04.2017
removed all IB order code. Those will be Project release only.
S26361-F3849-E100
cooling kit added
17.05.2017
HD_SSD / NON hot plug drives
Updated
04.04.2017
RAM
Added in "Others" sheet
27.04.2017
new order codes added
updated
09.05.2017
RAM
TPM 1.2 Module added
05.04.2017
RAM
16GFC Adapter: max = 6: F5596-E1/E2 F5580-E1/E2
added
24.10.2017
HDD_SSD / Note
26.10.2017
LAN
25GbE Adapter, Intel: LP deleted, FH max = 6
removed for 2.5" 7.2K/15K HDD / added for M.2 drive
25.10.2017
RAID
note in Z60S51 changed
24.10.2017
LAN
Added: 25GbE Adapter, Intel
20.10.2017
FC_IB
26.10.2017
LAN
remark by S26361-F3953-E210/-L210
17.11.2017
RAID, FC, LAN
reduce number of some ctrl.for base units w/ 6 card slots
13.11.2017
HDD_SSD
note for Dual microSD and DWPD for PCIe-SSD modified
26.10.2017
Description
PLAN EM Blind Panel OCP instead of OCP module
cnfgTX2550M4.xlsx change_history Page 33 of 34
PRIMERGY TX2550 M4
System configurator and
order information guide
Edition
February 15th, 2017
21.03.2018
FC_IB
QLE274X FC HBA Max = 6, up from 4
02.03.2018
HDD_SSD / F5701/F5703/F5700/F5706/F5697-*
added
21.02.2018
LAN
PLAN EM OCP - Released
22.02.2018
HDD_SSD / 2.5" (SFF) PCIe-SSD
max. number corrected
15.01.2018
HDD_SSD / exclusions for
8/10TB HDDs and PSAS CP400i/PRAID EP540i modified
15.01.2018
HDD_SSD
F5543/F5582/F5569-E124 / F5571/F5624/F3904-E120 added
08.12.2017
S26361-F2748-E538
on special release only!
S. Pilz / 06.12.2017
others
ATD code corrected
06.02.2018
ATD
PY TX2550 M4 Tower 4x3.5' basic and PY TX2550 M4 Tower
8x2.5' basic do not support ATD options!
21.03.2018
LAN
SFP28 S26361-F4055-E/L701 added for PLAN EP QL41212
13.02.2018
LAN
PLAN EP QL41212 & QL45611 added
31.01.2018
Xeon Silver 4114T
set to special release
15.01.2018
HDD_SSD
F5694/F5692-* / F5696-E240 added
cnfgTX2550M4.xlsx change_history Page 34 of 34