Haier HD80-A636 User Manual
Displayed below is the user manual for HD80-A636 by Haier which is a product in the Tumble Dryers category. This manual has pages.
Related Manuals
GB
User manual
Heat-Pump-Dryer
HD90-A636
Thank you GB
2
WARNING!
Risk of injury or suocation!
Disconnect the appliance from the mains supply. Cut o the mains cable and dispose
of it. Remove the door catch to prevent children and pets to get closed in the appliance.
Legend
Warning! – Important safety information
General information and tips
Environmental information
Disposal
To protect the environment, please dispose of the
packaging materials in an environmentally friendly
manner.
Do not dispose appliances marked with this symbol
with the household waste. Return the product to your
local recycling facility or contact your municipal oce.
The heat exchanger of the dryer contains the green-
house gas HFKW-134a. This must be disposed of
properly.
Thank you for purchasing a Haier Product.
Please read these instructions carefully before using this appliance. The instructions con-
tain important information which will help you get the best out of the appliance and ensure
safe and proper installation, use and maintenance.
Keep this manual in a convenient place so you can always refer to it for the safe and proper
use of the appliance.
If you sell the appliance, give it away, or leave it behind when you move house, make sure
you also pass this manual so that the new owner can become familiar with the appliance
and safety warnings.
GB Content
3
Safety information .................................................................................................................................4
Intended use ............................................................................................................................................7
Product description ...............................................................................................................................8
Control panel ........................................................................................................................................... 9
Programmes..........................................................................................................................................13
Consumption ........................................................................................................................................14
Suggestions and tips ...........................................................................................................................15
Daily use ..................................................................................................................................................17
Care and cleaning .................................................................................................................................21
Troubleshooting ...................................................................................................................................25
Installation ..............................................................................................................................................28
Accessories ...........................................................................................................................................29
Technical data .......................................................................................................................................30
Customer Service ................................................................................................................................32
Safety information GB
4
WARNING!
Before rst use
▶Make sure there is no transport damage.
▶Remove all packaging and keep out of children´s reach.
▶Handle the appliance always with at least two persons because it is
heavy.
Daily use
▶This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervi-
sion or instruction concerning use of the appliance in a safe way and
understand the hazards involved.
▶Keep away children under 3 years of age from the appliance unless
they are constantly supervised.
▶Children shall not play with the appliance.
▶Do make sure the room is dry and well ventilated. The ambient tem-
perature should be between 5 °C and 35 °C.
▶Do not cover any ventilation openings in the base by a carpet or
similar object.
▶Keep the area around the tumble dryer free of dust and lint.
▶Do make sure that there is only only laundry inside the appliance and
no pets or children before you use it.
▶Only touch the mains plug with dry hands and do not touch or use
the appliance if you are barefoot or have wet or damp hands or feet.
▶Only dry textiles washed in water.
▶Do make sure not to load more than nominal load.
▶Remove all items such as lighters and matches from pockets.
▶Use fabric softeners or similar products as specied by the
manufacturer´s packaging.
▶Do not use ore store any flammable sprays or flammable gas in close
vicinity to the appliance.
▶Do not place heavy objects or sources of heat or damp on top of the
appliance.
▶Hold the plug, not the cable, when unplugging the appliance.
▶Do not touch the rear wall and the drum during operation; they are
hot.
GB Safety information
5
WARNING!
Daily use
▶Do not dry following items in the appliance:
▶Items which are unwashed.
▶Items which have been contaminated with inflammable sub-
stances such as cooking oil, acetone, alcohol, benzine, petrol,
kerosene, spot removers, turpentine, waxes, wax removers
or other chemicals. The fumes can cause a re or explosion.
These items must always be washed rst by hand in hot wa-
ter with an extra amount of detergent and then be dried in the
open air before drying in the appliance.
▶Items which contain padding or llings (e.g. pillows, jackets), as
the lling can get out with the risk of igniting in the dryer.
▶Items which contain a large proportion of rubber, foam rubber
(latex foam) or rubber like materials such as shower caps, wa-
terproof textiles, rubberised articles and items of clothing and
pillows with foam rubber lling.
▶Do not drink the condensed water.
▶Do not use the appliance without the lint lter or condensor lter
in place or with damaged lter.
▶Notice that the last part of the drying cycle occurs without heat
(cool down cycle) to ensure remaining the garments at a temper-
ature which does not damage them.
▶Do not leave the appliance unattended during run time for some
time. If a long absence is intended, the drying cycle have to be
interrupted by switching o the unit and unplugging the mains.
▶Do not switch o the appliance except drying cycle is nished,
unless all items are quickly removed and spread out that the heat
can be released.
▶Switch o the appliance after each drying programme to save
electricity and for safety.
Maintenance / cleaning
▶Make sure children are supervised if they carry out cleaning and
maintenance.
▶Disconnect the appliance from the electrical supply before un-
dertaking any routine maintenance.
Safety information GB
6
WARNING!
Maintenance / cleaning
▶Clean the lint lter and the condenser lter after each pro-
gramme (see CARE AND CLEANING).
▶Do not use water spray or steam to clean the appliance.
▶Do not use industrial chemicals to clean the appliance.
▶Replace a damaged supply cord only by the manufacturer, its ser-
vice agent or similarly qualied persons in order to avoid a hazard.
▶Do not try to repair the appliance by yourself. In case of repair
please contact our customer service.
Installation
▶Ensure a location which allows opening the door fully. Do not in-
stall the tumble dryer behind a lockable door, a sliding door or a
door with hinges on the opposite side of the tumble dryer door
as this limits the full opening of the tumble dryer door.
▶Install the appliance in a well-ventilated, dry place.
▶Never install the appliance outdoors in a damp place, or in an area
which may be prone to water leaks such as under or near a sink
unit. In the event of a water leak cut power supply and allow the
machine to dry naturally.
▶Install or use the appliance only where the temperature is above
5 °C.
▶Do not place the appliance directly on a carpet, or close to a wall
or furniture.
▶Do not expose the appliance to any frost, heat or direct sunlight
or in the near of heat sources(e.g. stoves, heaters).
▶Make sure that the electrical information on the rating plate
agrees with the power supply. If it does not, contact an electri-
cian.
▶Do not use multi-plug adapters and extension cables.
▶Make sure not to damage the electric cable and the plug. If dam-
aged have it replaced by an electrician.
▶Use a separate earthed socket for the power supply which is easy
accessible after installation. The appliance must be earthed.
▶Only for UK: The appliance’s power cable is tted with 3-cord
(grounding) plug that ts a standard 3-cord (grounded) socket.
Never cut o or dismount the third pin (grounding). After the ap-
pliance is installed, the plug should be accessible.
GB Intended use
7
Notice
The appliance contains the fluorinated greenhouse gas HFKW-134a (GWP:1430). This
gas is hermetically sealed.
Intended use
This appliance is intended for drying items which have been washed in a water solution and
are marked on the manufacturer‘s care label as being suitable for tumble drying.
It is designed exclusively for domestic use inside the house. It is not intended for commer-
cial or industrial use. Changes or modications to the device are not allowed. Unintended
use may cause hazards and loss of of all warranty and liability claims.
Standards and directives
This product meets the requirements of all applicable EC directives with the correspond-
ing harmonised standards, which provide for CE marking.
Environmentally responsible use
▶Thorough drainage: Spin the laundry with the maximum spin speed.
▶Maximum load: Use the maximum lling amount according to the programme table,
but do not overload the dryer. To take advantage of the maximum load, the laundry
which should be dried „READY to STORE“, can be rst dried easily with „READY to
IRON“. At the programme end remove the laundry which should be ironed and dry the
remaining laundry then to end.
▶Loosen up the laundry: Shake out the laundry before putting them into the dryer.
▶Avoid excess drying: An excessive drying should be avoided. Select the right pro-
gramme and the appropriate dry level.
▶Softener unnecessary: Do not use softener when washing, because the laundry will
become fluy and soft in the dryer .
▶Cleaning of the lint lters: Clean the lint lters after each cycle.
▶Ventilation: Make sure the appliance is properly ventilated (see INSTALLATION).
▶Condensed water reuse: The collected condensed water can be used for the steam
iron. Before it should be poured through a ne sieve or coee lter paper. Smallest
parts will be retained by the lter.
Product description GB
8
VORDERANSICHT
1
2
3
4
6
5
10
97
8
10
Fig.1: appliance front Fig.2: appliance backside
Fig.3: Accessories
This drawing may be slightly dierent from the layout of the drying machine you have just
purchased.
1 Water tank
2 Rating plate
3 Service flap
4 Control panel
5 Door
6 Ventilation slots
7 Power cord
8 Back cover
9 Drainage outlet
10 Adjustable feet
User manual
Warrant card
Accessories
Check the accessories and literature in accordance with this list.:
Drain hose
(optional) Energy lable
GB Control panel
9
Fig.4: control panel
1-Maintenance indicators
The indicators light up in order to remind that the lter must be cleaned and the water
tank must be emptied (see CARE AND CLEANING).
Meaning of icons:
1 Maintenance indicators
2 Child-lock indicator
3 Display
4 Programme selector
5 On/O button
6 Temperature button
7 Dry Level button
8 Delay button
9 Time ±button
10 Memo button
11 Start/Pause button
Temp.Dry Level Intense Delay Start/Pause
Extra rinse
.
Bedding
Refresh
Timer
Ready to
Iron
Heat
Pump
1 2 3 4 5
11
10
9
8
7
6
Illuminated LED Meaning
Clean the lint lter in the lling opening and the condenser lter in
the base.
Empty the water tank or check it for correct positioning.
2-Child lock indicator
This option blocks all panel elements against activa-
tion. After starting a programme press simultaneously
“Temp“+“Delay“ for about 3 seconds (g. 5); the child
lock indicator lights up. For unlocking please press
again the two buttons.
The icon flashes if a button will be pressed or the pro-
gramme selector will be twisted, when the child lock is
activated. The change is not running.
Temp.Dry Level Intense Delay
Extra rinse
.
5
Notice
▶When the cycle ends or the power supply is interrupted, the function will not be can-
celled automatically.
▶We recommend to switch on this function if there are children in the household.
▶The On/O button can be activated during function child lock is selected.
Control panel GB
10
5-On/O button
Press this button to switch on or switch o the appli-
ance (g. 8).
8
4-Programme selector
By turning the knob one of 16 programmes can be se-
lected (g. 7). The default settings will be displayed.
Bedding
Refresh
Timer
Ready to
Iron
7
Notice
After each switch-on, the appliance suggests the economical programme “Cotton-
Ready to store“ for drying normal wet cotton laundry.
3-Display
During any selection the display (g.:6) shows related
information like
▶Programme cycle time
▶Programme start delay time
▶Error codes (see TROUBLESSHOOTING)
After start of an operation it displays:
▶Remaining time in hours of a delayed programme
starts, e.g. 13:00
▶Remaining programme cycle time in hours + min-
utes, e.g.1:59
While running it may vary due to local conditions and
daily working load.
6
6-Temp. button
Touch this button (g.9) to select the drying tempera-
ture of the programme. Press sequentially the Temp.
button until the desired symbol flashes on the display.
In conjunction with the “Delay” button, the child lock
function can be switch on/o(see CHILD LOCK INDI-
CATOR).
Temp.Dry Level
Intense
.
9
GB Control panel
11
Illuminated LED Term Meaning
High temperature For heavy fabrics.
Middle temperature For normal fabrics.
Low temperature For easy-care fabrics.
Cool air For airing of dry, worn cloths.
Meaning of the symbols:
Illuminated LED Dry level Meaning
Extra dry Dry level for thick or multi-layered textiles, which are
to be dried out.
Ready to Store Dry level for linen, which should not be ironed, and
which you want to placed immediately into the cabi-
net (such as towels, non-iron synthetic fabrics etc.).
Ready to Iron Light to medium weight fabric, which should be
ironed with the iron/ironing machine.
The selected dry level determines the residual moisture content of dried laundry. The
lower the desired residual moisture content, the longer the drying time.
The residual moisture content of dried laundry depends on several factors like e.g loading,
textile art, room temperature etc.
7-Dry Level button
With this button (g. 10), the desired dryness level can
be selected for some programs. Press sequentially the
Dry Level button until the desired symbol flashes on
the display.
Temp.Dry Level Intense Delay
Extra rinse
.
10
Meaning of the symbols:
8-Delay button
Press this button (g. 11) to start the selected pro-
gramme with a delay. The delay could be increased in
steps of one hours from 1-19h. For example display of
6:00 means start of programme cycle will be in 6 hours.
Press “Start/Pause” button to activate the time delay.
In conjunction with the “Temp.” button, the child lock
function can be switch on/o(see CHILD LOCK INDI-
CATOR).
Dry Level
Start/Pause
11
Control panel GB
12
Notice
The “Delay function” can not be memoried.
9-Time ± button
With this button the programme duration of pro-
gramme TIMER can be selected.
1. Set programme Timer (g.12).The default time is
30 min.
2. By pressing the Time ± button (g.13) the time can
be increased or decreased with steps of 10 min-
utes. The shortest time is 10 min and the long-est
time is 02h:30 min. The indicator lights up.
3. Start the programme by pressing the „Start/
Pause“ button.
Refresh
Timer
12
Start/Pause
13
10-Memo button
A programme with all of its settings can be saved for
reuse by touching this button (g. 14).
1. Set the programme with all desired functions.
2. Press the button „Memo“ for 2 sec. The indicator
lights up.
When you want to use the stored cycle you just only
press the „Memo“ button. The indicator lights up and
the stored cycle is activated.
Start/Pause
14
11- Start/Pause button
Press this button gently (g. 15) to start or interrupt
the currently displayed programme. During operation
its LED is shining, or if interrupted blinking.
Start/Pause
15
GB Programmes
13
1) Applied to dry laundry.
2) Dry level: Extra Dry, Ready to Store, Ready to Iron.
3) Temperature: low temperature, middle temperature, high temperature, cool air.
4) This programme has reversing function.
• = Preset; o = Available
Programme
Max.
load 1)
in kg
Laundry Dry level 2) Temperature 3)
Cotton
Extra Dry 9.0
Cotton
Laundry of varying thickness and
multi-layered garments, such as
bathrobes, however no shirts. • • o o
Ready to Store 9.0 Cotton
Terry towels, shirts. • • o o
Ready to Iron 9.0
Cotton
Bed linen, table linen, kitchen tow-
els, which should still be ironed. • • o o
Mix 4.0 Mixed loading of textiles made of
cotton and synthetics. o•o o •o
Bedding 4) 4.0 Bed linen, shets or other volumi-
nous textiles. •o o o •o
Sport 3.0 Light sportswear, such as track-
suits. o•o o •o
Underwear 3.0 Underwear made of cotton. o•o o •o
Baby Garment 4.0 Baby garment made of cotton. o •o o •o
Refresh 3.0 For refreshing (no drying!) of all
kind of textiles after air drying. •
Timer 4.0 All kind of garments (except for
wool and silk), which should be in-
dividually dried. o•o o
Jeans 3.0 Jeans •o o •o o
Towel 4) 4.0 Towels, bathrobes. • o o •o o
Shirt 4) 3.0 Shirts o•o o •o
Synthetic
Extra Dry 4.5
Easy care textiles
made of synthetic or mixed bres
(non-iron), e.g. bed and table linen,
shirts. •o•o
Ready to Store 4.5 Easy care textiles
made of synthetic or mixed bres,
e.g. bed and table linen, sweater. •o•o
Ready to Iron 4.5 Easy care textiles
made of temperature-sensitive
textiles which should be ironed. •o•o
Consumption GB
14
The indicated consumption values may accordingly dier to local conditions.
Programme Spin speed
in rpm *
Restidual
moisture
in %
Time
in h:min
Energy
consumption
in kWh
Cotton 9 kg
Extra Dry
1400 approx. 50 4:11 2.10
1000 approx. 60 4:40 2.34
Ready to Store
1400 approx. 50 3:45 1.80
1000 approx. 60 4:29 1.98
Ready to Iron
1400 approx. 50 2:39 1.30
1000 approx. 60 3:18 1.62
Synthetic/ easy care textiles 4.5 kg
Extra Dry
1200 approx. 40 2:02 0.88
800 approx. 50 2:32 1.10
Ready to Store
1200 approx. 40 1:29 0.66
800 approx. 50 1:47 0.75
Ready to Iron
1200 approx. 40 1:00 0.42
800 approx. 50 1:20 0.56
*
* Standard programme for the energy labelling according to 392/2012 EU: Cotton Ready to Store
This programme is suitable for drying normal wet cotton laundry and it is the most ecient pro-
gramme in terms of energy consumption for cotton The actual energy consumption per cycle de-
pends on the type of use of the appliance.
GB Suggestions and tips
15
Starched laundry
Starched laundry leaves a lm of starch in the drum and is not suitable for the dryer.
Softener
Do not use softener when washing, because the laundry will become soft and fluy in the
dryer.
Soft care cloths
The use of “soft care cloths” can lead to a coating at the lint lters. This can cause a block-
age of the lters. In such cases, we recommend either to abstain from adding soft care
cloths or to choose a dierent brand. In any case note the manufacturer’s instructions.
Small amounts of lling
In a quantity of less than 1.0 kg, the TIMER-programme should be selected because the
automatic scanning of the dry level can be captured only still inaccurate.
Open door
The door should be left ajar during the non-use, so that the door seal indenitely remains
in eect.
Drum interior light
When the appliance is switched on, always the drum interior light lights when door is open .
Service ap
Make sure that the service flap is always closed during operation.
Anti crease protection
If at the end of the programme the laundry is not removed, the drum moves from time to
time to prevent creasing. The anti crease protection phase is approx. 60 minutes.
Laundry which should be ironed
...should be dried with level READY to IRON . This facilitates ironing by hand or using
the machine.
Remaining time
The programme duration is influenced by the following factors: the type of fabric, the lling
quantity, absorptive capacity, the desired dry level, as well as the spin speed of the washing
machine. These factors are registered by the electronics during the programme and the
remaining time will be corrected accordingly.
AUTO load detection system
When the programme starts, after a few minutes the display will show AUto. This means
the automatic load detection is in progress. Sensors are detecting and estimating the se-
lected programme time to nish. Depending on the programme selected, load quantity,
humidity and ambient temperature, the AUTO load detection phase can last a few minutes
for small load, or up to hour for the maximum load or large items, before displaying the ap-
proximate programme time remaining to nish the programme.
Suggestions and tips GB
16
Extra large pieces
... tend to wind up. If therefore the desired dry level could not be reached, loosen up the
laundry and dry again with the time programme (TIMER).
Especially delicate fabrics
Textiles which can easily shrink or lose their shape, as well as e.g. silk stockings, lingerie
etc. should not be put in the dryer. Put delicate garments inside a laundry bag and avoid
overdrying them.
Jersey and knitwear
should be dried at READY to IRON to avoid shrinkage. A subsequent stretch or pull into
form should be performed.
Flu
The amount of lint in the lint lters is not attributable to the wash stress in the dryer; rather,
it is extracted bers from the wearing and washing. During drying on the line, the flu will
be carried away by the wind. By using a tumble dryer the flu will be collected in the lters.
Acoustic signal
An acoustic signal sounds:
▶when the water tank is full
▶in case of failures
Additionally the acoustic signal can also be selected for following cases:
▶at the end of programme
▶when pressing a button
▶when turning the programme selector
How to activate/deactivate the additionally acoustic signal:
1. Press “on/o“ button to switch on the appliance.
2. Simultaneously press button “Time ±” and “Memo” for about 3 seconds.
GB Daily use
17
CAUTION!
Non-textile, as well as small, loose or sharp-edged items may cause malfunctions and
damage of clothes and appliance.
* Reduce temperature .
Preparing the laundry
▶Sort clothes according to fabric(cotton, syn-
thetics, etc.) desired dry level and equal residual
moisture (g. 20).
▶Follow the instructions on the laundry label and
dry only machine-dryable garments.
20 21
Preparing the appliance
1. Connect the appliance to a power supply (220V
to 240V~/50Hz) (g. 16) Please refer also to sec-
tion INSTALLATION.
2. Make sure:
▶the water tank is empty and properly installed.
(g. 17).
▶the lint lter is clean and properly installed. (g.
18).
▶the condenser lter is clean and properly in-
stalled.(g. 19).
17 17
20
18
16
19
Symbol Meaning Symbol Meaning
Dry at normal temperature (full
power); E.g. for cotton linen
Line drying
Flat drying
Dry with low temperature; for
easy-care linen *
Drip flat drying
Iron at 110 °C
Do not tumble dry. E.g. wool
and textiles containing wool, silk
Iron at 150°C
Iron at 200°C
Do not iron
▶Empty pockets of all sharp or flammable objects (coins, keys, paper tissues, lighters,
matches etc.) and remove harder decorative objects (brooches etc.) (g. 21).
Daily use GB
18
Tips:
▶Separate white clothes from coloured ones.
▶Unfold large items such as bed sheets, table cloths, etc.
▶Bed linen and pillowcases should be button, so that small parts cannot collect inside.
▶Close zippers and hooks, and tie loose belts without metal parts, apron strings etc.
together.
▶Place small items such as socks, belts, bras, etc. in a wash bag.
▶Make sure all buttons are sewn on tightly .
▶Sew or remove loose metal parts of garments, such as e.g. metal buttons, bow of
bras before inserting. Otherwise such parts can cause noise and damage the drum.
▶Do not over-dry easy-care linen. Risk of the crease. Allow nal drying at the air.
▶Knitwear (e.g. T-shirts, underwear) sometimes run up during drying. Only use dry level
READY to IRON and drag in the form afterwards.
▶For pre-dried, multi-layered garments or for nal drying the time-programme
(TIMER) should be chosen.
Loading the appliance
▶Loosen up and insert presorted laundry.
▶Don‘t overload.
▶Close the door carefully. Make sure that no pieces of laundry are pinched.
Removing and adding laundry
WARNING!
Never turn the dryer o before the end of the drying cycle unless all items are quickly
removed and spread out that the heat can be released.
To remove or add laundry the programme can be interrupted at any time:
▶Open the door. The cycle interrupts.
Be careful when removing or adding the laundry! The Interior of the drum or the laun-
dry itself may be hot, so that there is danger of burns .
▶To continue the programme, press the “Start/Pause” button after closing the door.
GB Daily use
19
Switch on the appliance
Press the „on/o“- button to switch on the appliance.
(g.: 22).
22 23
Additional settings
Choose additional settings (g.: 24); see section
CONTROL PANEL.
Select a programme
To get the best drying results, select a programme
which ts the dry level and sort of laundry type.
Turn the programme knob to select the right pro-
gramme (g.: 23). The default settings light up in the
display. If there are options available, the option pro-
posed by the appliance will be displayed by a flashing
symbol. The display shows the time until the end of the
programme.
Start programme
Press “Start/Pause“ button to start (g.: 25).
The Appliance operates according to present set-
tings. Changes are only possible by cancelling the pro-
gramme.
After a few minutes the display will show Auto to indi-
cate that AUTO load detection system is working (see
section SUGGESTIONS AN TIPS).
Interrupt/ change/ cancel a programme
To interrupt a running programme press “Start/Pause“.
The LED of this button is flashing.
Changes or setting a new programme are now possi-
ble. Press the button “Start/Pause“ again to continue
the programme with the new settings.
Hold the button „On/O“ in order to cancel the pro-
gramme.
Notice
▶After each switch-on, the appliance suggests the economical programme “Cotton-
Ready to Store“ for drying normal wet cotton laundry.
▶The displayed remaining time is a default value, this time will be re-calculated depend-
ing on additional programme settings and the moisture content of the laundry. See
SUGGESTIONS AND TIPS.
Start/Pause
25
Temp.Dry Level Intense Extra rinse
.
24
Daily use GB
20
After drying
The tumble dryer stops operation automatically when a dry cycle is complete. The display
shows END.
Notice
The last part of the drying cycle occurs without heat (cool down cycle) to ensure re-
maining the garments at a temperature which does not damage them.
1. Press “On/O“ button to switch o the appliance.
(g.: 26).
2. Remove laundry as soon as possible to go easy
on it and to prevent more wrinkling (g.: 27). If
the laundry is not removed the anti-crease pro-
gramme starts automatically. In anti-crease
phase, the drum will rotate 30 sec. in each 5.5
minutes, the total phase time will last for 1 hour.
3. Unplug the power cord (g.: 28).
4. Empty the water tank (g.: 29).
5. Clean the lint lter in the lling opening (g.: 30).
6. Clean the condenser lter (g.: 31).
7. Open the door to prevent formation of moisture
and odours. Let it open while not used (g.: 32).
26 27
28 29
30 31
32
Standby mode / power- saving mode
The switched on appliance will go into standby-mode if it will not be activated within 5
minutes before starting the programme or at the end of programme. This saves energy.
To interrupt the standby-mode push the “On/O button.
GB Care and cleaning
21
Empty the water tank
During operation, steam condenses to water which is collected in the water tank. The tank
must be emptied after each drying cycle.
If the tank is full:
▶the lamp will flash during the programme.
▶an acoustic signal will sound.
▶the programme will automatically interrupted; the laundry remains wet.
▶the „Start/Pause“ button must be pressed after the tank was emptied in order to con-
tinue the programme.
WARNING!
Do not use the water for any kind of drinking or food processing.
CAUTION!
Following maintenance activities must be carried out after each drying cycle.
▶Empty the water tank
▶Clean the lint lter
▶Clean the condenser lter
1. Pull out the water tank from its housing. Hold the
tank horizontally (g.: 33).
2. Empty the water tank into a sink (g.: 34).
3. Reinstall the water tank to the tumble dryer. (g.:
35).
The tank can also be emptied during programme. To
continue the programme the “Start/Pause” button has
to be pressed after the tank has been reinstalled.
The symbol only switches o after new programme
was started.
Notice
The condensed water can also be derived by a drain hose (enclosed or as an optional
accessory available at the customer service). The tank needs no longer be emptied (see
section ACCESSORY).
33 34
35
Care and cleaning GB
22
Fiber abrasion results because of wearing and washing
the laundry. These bers (flu) will be collected during
the drying process in the lint lter. The lint lter in the
lling opening must be cleaned after each drying cycle
to ensure proper air circulation. The shining LED
will remind you.
1. Remove the lint lter from the drum (g.: 36).
2. Open the lint lter (g.: 37 and 38) and remove all
lint residuals. By using a damp cloth or moistened
hand the flu will be remove easily.
Detergent residue may be form coating at the flu
lter. In this case, the lter must be cleaned with
warm water and a soft brush.
3. Reinstall the cleaned lint lter in the tumble dryer
(g.: 39). The symbol only switches o after the
appliance was turned o.
4. Occasionally the flu around the housing of the
lter as well as on the seal should be removed (g.:
40).
WARNING!
Do not operate the dryer without or with damaged lint or condenser lter.
The tumble dryer is equipped with a lter system to
protect the heat pump from dirt. This is located in the
base of the appliance. Gradually also at this place larger
amounts of flu will be accumulated and may aect
the proper function of the appliance. The shining LED
will remind you.
1. Open the Service door (g.: 41).
2. Open the four levers (g.: 42).
3. Pull out the condenser lter from its housing (g.:
43).
4. Remove the rear lter screen (g.: 44/45).
5. Clean the condenser lter from any residuals with
a damp cloth or moistened hand. If the lter is very
dirty, it can be cleaned under running water.
6. Reinstall the rear lter to the condenser lter (g.:
46).
7. To reinstall the condenser lter, follow the above
steps 3 to 1 in reverse order.
Clean the lint lter
36 37
38 39
40
Clean the condenser lter
41 42
43 44
45 46
GB Care and cleaning
23
50
Clean the machine
▶Use a soft cloth with soap liquid to clean the ma-
chine case and rubber components (g.: 50).
▶Do not use organic chemicals or corrosive sol-
vents.
Notice
During the drying, moisture may accumulate between windows and seal. It does not af-
fect the function of the dryer.
Clean the front of the heat exchanger
Approximately all 10 drying cycles the front of the
heat exchanger should be cleaned from flu by using
a sponge or vacuum cleaner (g.: 47/48). Please use
household gloves. The flu can remove easily when
they have been sprayed with water previously.
On this occasion the ventilation slots should be vacu-
umed also (g.: 49).
47 48
49
WARNING!
Unplug the machine during cleaning and mainte-
nance.
Clean the drum
▶After some operation time, fabric care agents or
calcium contained in the water can form an almost
invisible lm on the inside of the drum. Use a damp
cloth and some detergent to remove it (g.: 51). Do
not use any organic solvent or corrosive agent to
avoid damage to the appliance.
▶Remove metal parts such as needles, coins, etc.
from the drum which were accidentally dried with
the laundry, because it can cause rusting.
▶For removing rust stains, use a non-chloride clean-
er. Note the safety instructions of the cleaning
agent manufacturer!
▶Do not use any hard objects or steel wool for clean-
ing.
51
Care and cleaning GB
24
Long periods of disuse
If the appliance is not in use for a long time :
1. Empty the tank.
2. Set any programme.
3. Start the programme. The residual water will be pumped into the tank.
4. Stop the programme after some minutes or wait until programme nished automati-
cally. Empty the tank again.
5. Pull out the electrical plug.
6. Open the door to prevent formation of moisture and odours. Let door open while not
used.
Before next usage check carefully the power cord.
GB Troubleshooting
All other Alarmcodes:
1. Note Alarmcode
2. Contact Service ; refer to CUSTOMER SERVICE.
25
Many occuring problems could be solved by yourself without specic expertise. In case
of a problem please check all shown possibilities and follow below instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
▶Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
▶Electrical equipment should be serviced only by qualied electrical experts, because
improper repairs can cause considerable consequential damages.
▶A damaged power cable should only be replaced by the manufacturer, its service
agent or similarly qualied persons in order to avoid a hazard.
Troubleshooting with display code
Code Cause Solution
E6 Filters are clogged. Clean lters.
Lo Ambient temperature is too low. Only use the dryer at ambient
temperatures higher than 5 °C.
F2 Drain pump error. Contact the customer service.
F4 Temperature of the laundry in the drum does not change. Contact the customer service.
F5 Communication failure between PCB and display. Contact the customer service.
F32
F33
The condenser thermal sensor is open-circuited
or short -circuited.
Contact the customer service.
Should the error codes reappear even after the taken measures, switch o the appliance,
disconnect the power supply and contact the customer service.
Information codes
Following codes are displayed only for information referring to the drying cycle. No meas-
ures must be performed.
Code Message
Auto
Automatic load detection is working.
1:25
The remaining programme time will be 1 hour and 25 minutes.
7:00
Delayed start of programme is activated. The start of programme cycle will
be in 7 hours.
End
The programme is nished. Switch o the appliance and remove the laundry.
Troubleshooting GB
26
* The drying cycle is automatically cancelled after 7 hours.
Troublesshooting without display-codes
Problem Possible cause Possible solution
Tumble dryer
fails to operate. • Programme is not yet started?
• Delay function is activated?
• Door is not properly closed?
• Machine has not been switched
on?
• „
Start/Pause“ button was
pressed?
• Appliance is connected to the
power supply?
• The water tank is full or not
properly installed?
• Child lock is activated?
• Check programme and start it.
• Cancel the delay start.
• Close the door properly.
• Switch the machine on.
• Press „Start/Pause“ button.
• Check power supply.
• Empty the water and install
it properly; press the „Start/
Pause“-button.
• Deactivate child lock.
Appliance fails
to operate and
the display
shows End.
• The laundry has reached the
dry level dened by the pro-
gramme?
• There is no laundry in the drum?
• Check the programme set-
ting and post-dry if necessary.
• Check the drum.
The drying
results are not
satisfactory.
• The programme setting is not
correct?
• The correct dry level was chosen?
• The lter is dirty?
• The condenser lter is dirty?
• The heat exchanger is clogged?
• T
he ventilation slots are clogged?
• The tumble dryer is overloaded?
• There is a coating on the inner
surface of the drum?
• The laundry was too wet?
• Dirt is on the moisture sensor in
the drum?
• Warm laundry feels more moist
than it really is.
• Check the programme set-
ting.
• Check the dry level.
• Clean the lint lter.
• Clean the condenser lter
• Clean the heat exchanger.
• Clean the ventilation slots.
• Reduce the amount of laundry.
• Clean the inner surface of the
drum with a cloth soaked in
vinegar.
• Spin the laundry properly be-
fore drying.
• Clean the front surface of the
drum with a cloth soaked in
vinegar.
• Spread out laundry that the
heat can escape.
Drying time is
too long.* • The condenser lter is dirty?
• The tumble dryer is overloaded?
• The laundry was too wet?
• Ambient temperature is too
low?
• Clean the condenser lter.
• Reduce the amount of laundry.
• Spin the laundry properly be-
fore drying.
• Pay attention to the installa-
tion instructions. and increase
the ambient temperature, if
possible.
GB Troubleshooting
27
In case of power failure
In case of power failure, the current programme is stored only for a short time. Usually, a
restart of the programme is required.
WARNING!
Quickly remove all items and spread them out that the heat can be released.
Problem Possible cause Possible solution
Drying time is
too short. • The load was too small?
• The laundry was too dry?
• For single items or small
amount of laundry the TIMER
programme should be selected.
• Select the TIMER programme
or a higher dry level.
Creasing at the
laundry. • The tumble dryer is overloaded?
• The right programme was se-
lected?
• Reduce the amount of laundry.
• Remove laundry immediately
after programme end, hang
them up and pull them into
shape.
• Select and adjust the pro-
gramme according to the fab-
ric type.
Door does not
close. • Laundry is clamped between
door and gasket? • Insert laundry correctly.
Remaining time
on the display
stops or skips.
• The remaining time will be ad-
justed continuously based
upon the following factors:
- Type of laundry.
- Loaded amount.
-
Moisture degree of the laundry
.
- Ambient temperature.
• The automatic adjustment is a
normal operation.
The drum interi-
or light does not
work.
• Appliance is connected to the
power supply?
• The appliance has been
switched on?
• The light bulb is still functional?
• Check power supply
• Switch the machine on.
• Contact the customer service
to replace the lamp.
Installation GB
28
Preparation
▶Remove all packaging material. While opening the package, water drops may be
seen. This normal phenomenon results from water tests in the factory.
▶Remove all packaging material including the polystyrene base.
Notice
Dispose of the packaging in an environmentally friendly manner. For information refer-
ing current disposal routes, consult your retailer or the local authorities.
The appliance should be placed on a flat and solid sur-
face. Set the feet to the desired level (g.: 52).
1. The dimensions of the recess should at least
agree with the dimensions in the gure 53.
2. Put the appliance adjacent to the slot. Make sure
that all connections are easily accessible and func-
tional.
3. Adjust accurately all feet to get a rm level posi-
tion.
4. Install the appliance prudently into the recess.
5. Pay attention to sucient ventilation.
Before each connection check if:
▶power supply, socket and fusing are appropriate
to the rating plate.
▶
the power socket is earthed and no multi-plug
or extension.
▶
the power plug and socket are strictly according.
▶
Only UK: The UK plug meets BS1363A standard
Put the plug into the socket. (g.: 54).
WARNING!
If the supply cord is damaged, it must be replaced by the service agent (see warranty
card) in order to avoid a hazard!
Transport and waiting time
Transport the appliance in horizontal position only. To the maintenance-free lubrication
oil is located in the capsule of the compressor. This oil can get through the closed pipe
system during slanting transport. Before connecting the appliance to the power supply
you have to wait 2 hours so that the oil runs back into the capsule.
Aligning the appliance
52
Installation under worktop
53
Electrical connection
54
GB Accessories
29
Connection of a drain hose
With the drain hose (included or optional available
at the customer service; g.:55) the condensed wa-
ter can be redirected to the drain (sink, trap or gully;
g.:56). The draining of the water tank is eliminated.
Nevertheless the tank must be installed in the control
panel correctly.
1. Draw the drainpipe from the joint at the back of
the appliance (g.:57).
2. Connect the accessory drain hose to the discon-
nected drainpipe. Make sure both tubes are rmly
xed (g.:58).
3. The outlet of the drain hose must not be higher
than 1.0 m above the floor. If necessary the hose
can be shortened.
4. Secure the drain hose against slipping.
55 56
58
57
CAUTION!
▶Use only the accessory hose set for the connection.
▶The drain hose is never to be crushed, kinked, or twisted.
▶The drain hose is not to be extended.
▶Secure the drain hose against slipping. Otherwise the hose can slide o and running
condensed water may cause damage.
Wash-dryer stack
The arrangement to a space saving wash-dryer stack
is possible (g.:59). Not every washing machine is suit-
able for this purpose. Information, as well as the cor-
responding mounting kit are available via your local
dealer.
The mounting instructions supplied with the kit care-
fully inform about the installation steps.
59
Technical data GB
30
Productche (acc. to EU 392/2012)
Trade mark Haier
Model identier HD90-A636
Rated capacity (kg) 9
Kind of tumble drier Condenser
Energy eciency class A++
Weighted Annual Energy Consumption (AEc in kWh/year
) 1) 236
Tumble dryer with or without automatic with automatic
Energy consumption of the standard cotton programme 3) at
full load (kWh/cycle) 1.98
Energy consumption of the standard cotton programme 3) at
partial load (kWh/cycle) 1.17
Power consumption of the o-mode (W) 0.1
Power consumption of the left-on mode (W) 1.19
Duration of the „left-on mode“ (min) 2) 40
Standard drying programme 3) Cotton Ready to Store
Weighted programme time of the standard drying pro-
gramme 3) at full and partial load (min) 208
Programme time of the standard cotton programme 3) at
full load (min) 269
Programme time of the standard cotton programme 3) at
partial load (min) 162
Condensation eciency class 4) B
Weighted condensation eciency for the standard cot-
ton programme 3) at full and partial load (%) 80
Average condensation eciency of the standard cotton
programme 3) at full load 80
Average condensation eciency of the standard cotton
programme 3) at partial load 80
Weighted sound power level of the standard cotton pro-
gramme 3) at full load (dB) 67
Built-in or freestanding Freestanding/ built under
1) Based on 160 drying cycles of the standard cotton programme at full and partial load, and the
consumption of the low-power modes. Actual energy consumption per cycle will depend on how
the appliance is used.
2) In case there is a power management system.
3)
This programme used at full and partial load is the standard drying programme to which the infor-
mation in the label and the che relates to. This is the programme suitable for drying normal wet
cotton laundry and it is the most ecient programme in terms of energy consumption for cotton.
4) Class G is the least ecient and Class A is the most ecient.
GB Technical data
31
Dimensions - HxDxW in mm 845 x 650 x 595
Power supply (refer to rating plate) - voltage / current / input 220-240 V~50 Hz/ 2.4A/
550 W
Permissible ambient temperature 5°C to 35°C
Fluorinated greenhouse gas
Volume
GWP
Tonne(s) of CO2 equivalent
HFKW-134a
0.42 kg
1430
0.6
Additional data
Customer service GB
We recommend our Haier Customer Service and the use of original spare parts.
If you have a problem with your appliance, please rst check section TROUBLESHOOTING.
If you cannot nd a solution there, please contact
▶your local dealer or
▶the Service & Support area at www.haier.com where you can nd telephone numbers
and FAQs and where you can activate the service claim.
To contact our Service, ensure that you have the following data available.
The information can be found on the rating plate.
Model ____________________ Serial No. _____________________
Also check the Warranty Card supplied with the product in case of warranty.
For general business enquiries please nd below our addresses in Europe:
European Haier addresses
Country* Postal address Country* Postal address
Italy
Haier Europe Trading SRL
Via De Cristoforis, 12
21100 Verese
ITALY
France
Haier France SAS
3-5 rue des Graviers
92200 Neuilly sur Seine
FRANCE
Spain
Portugal
Haier Iberia SL
Pg. Garcia Faria, 49-51
08019 Barcelona
SPAIN
Belgium-FR
Belgium-NL
Netherlands
Luxembourg
Haier Benelux SA
Anderlecht
Route de Lennik 451
BELGIUM
Germany
Austria
Haier Deutschland GmbH
Hewlett-Packard-Str. 4
D-61352 Bad Homburg
GERMANY
Polska
Czechia
Hungary
Greece
Romania
Russia
Haier Poland Sp. zo.o.
Al. Jerozolimskie 181B
02-222 Warszawa
POLAND
United
Kingdom
Haier Appliances UK Co.Ltd.
One Crown Square
Church Street East
Woking, Surrey, GU21 6HR
UK
*For more information please refer to www.haier.com
32
GB
European Haier addresses
Country* Postal address Country* Postal address
Italy
Haier Europe Trading SRL
Via De Cristoforis, 12
21100 Verese
ITALY
France
Haier France SAS
3-5 rue des Graviers
92200 Neuilly sur Seine
FRANCE
Spain
Portugal
Haier Iberia SL
Pg. Garcia Faria, 49-51
08019 Barcelona
SPAIN
Belgium-FR
Belgium-NL
Netherlands
Luxembourg
Haier Benelux SA
Anderlecht
Route de Lennik 451
BELGIUM
Germany
Austria
Haier Deutschland GmbH
Hewlett-Packard-Str. 4
D-61352 Bad Homburg
GERMANY
Polska
Czechia
Hungary
Greece
Romania
Russia
Haier Poland Sp. zo.o.
Al. Jerozolimskie 181B
02-222 Warszawa
POLAND
United
Kingdom
Haier Appliances UK Co.Ltd.
One Crown Square
Church Street East
Woking, Surrey, GU21 6HR
UK
33
HD90-A636 GB _V07 _082016