Hannspree HG 440 CFW User Manual
Displayed below is the user manual for HG 440 CFW by Hannspree which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
HG440CFW (HSG1447)
LCD Monitor
User’s Manual OSD[V6.1]
2
Before operating the monitor, please read this manual thoroughly. This manual should be retained for
future reference.
This device complies with requirement of EMC directive 2014/30/EU with regard to
Electromagnetic Compatibility, and 2014/35/EU and 93/68/EEC with regard to Low Voltage
directive.
Socket-outlet shall be near the equipment and shall be accessible.
Trademark Notice:
HANNspree products incorporate High-Definition Multimedia Interface
(HDMI TM) technology.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
User’s Manual
3
RECYCLING INFORMATION
We, at HANNspree care very much about our environment protection strategy and firmly believe
that it helps us have healthier earth via appropriate treatment and recycling of industrial technology
devices at the end-of-life.
These devices contain recyclable materials, which can be re-decomposed and re-integrated into
brand-new marvels. On the contrary, other material can be classified to hazardous and poisoned
substances. We strongly encourage you to contact the provided information to recycle this product.
For more information, please visit
http://www.hannspree.eu/
User’s Manual
4
TABLE OF CONTENTS
SAFETY NOTICE .................................................................................................. 5
PRECAUTIONS................................................................................................. 5
SPECIAL NOTES ON LCD MONITORS ...................................................... 6
BEFORE YOU OPERATE THE MONITOR ...................................................... 7
FEATURES......................................................................................................... 7
CHECKING THE CONTENTS OF THE PACKAGE .................................. 7
INSTALLATION INSTRUCTIONS ................................................................ 8
POWER............................................................................................................... 8
ADJUSTING DISPLAY HEIGHT ................................................................... 9
SETTING THE MONITOR ON THE WALL .............................................. 10
MAKING CONNECTIONS.............................................................................11
ADJUSTING THE VIEWING ANGLE......................................................... 12
OPERATING INSTRUCTIONS ......................................................................... 13
GENERAL INSTRUCTIONS......................................................................... 13
FRONT PANEL CONTROL .......................................................................... 14
HOW TO ADJUST A SETTINGS .................................................................. 15
PLUG AND PLAY............................................................................................ 18
TECHNICAL SUPPORT (FAQ) ......................................................................... 19
Q & A FOR GENERAL PROBLEMS ........................................................... 19
ERROR MESSAGE & POSSIBLE SOLUTIONS ....................................... 21
APPENDIX ............................................................................................................ 23
SPECIFICATIONS .......................................................................................... 23
User’s Manual
5
SAFETY NOTICE
1. The changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the
emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modification to this equipment. It is the responsibilities of the user to correct such interference.
4. Only use attachments/accesories specified by the manufacturer.
WARNING:
To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously high
voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified
personnel only.
PRECAUTIONS
Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub,
swimming pool or in a wet basement.
Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a
person and cause serious damage to the appliance. Use only a cart or stand recommended by the
manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a
mounting kit approved by the manufacturer and follow the kit instructions.
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure
reliable operation of the monitor and to protect it from overheating, be sure these openings are not
blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place
the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or
cabinet unless proper ventilation is provided.
The monitor should be operated only from the type of power source indicated on the label. If you
are not sure of the type of power supplied to your home, consult your dealer or local power
company.
Unplug the unit during a lighting storm or when it will not be used for long period of time. This
will protect the monitor from damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a
fire or electric shock. Never spill liquids on the monitor.
Do not attempt to service the monitor by yourself; opening or removing covers can expose you to
dangerous voltages and other hazards. Please refer all servicing to qualified service personnel.
The wall socket shall be installed near the equipment and shall be easily accessible.
User’s Manual
6
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitor and do not indicate a problem.
Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the
Power Switch and then turn it on again to make sure the flicker disappears.
You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or
less such as a missing pixel or a pixel lit all of the time.
Due to the nature of the LCD screen, an afterimage of the previous screen may remain after
switching the image, when the same image is displayed for hours. In this case, the screen is
recovered slowly by changing the image or turning off the Power Switch for hours.
If the screen suddenly flashes erratically or the backlighting fails, please contact your dealer or
service center for repair. Do not attempt to repair the monitor yourself.
User’s Manual
7
BEFORE YOU OPERATE THE MONITOR
FEATURES
111,25cm / 43.8” Wide Screen TFT Color LCD Monitor
Crisp, Clear Display
Ergonomic Design
Space Saving, Compact Case Design
CHECKING THE CONTENTS OF THE PACKAGE
The product package should include the following items:
LCD Monitor
Screen Stand Mounting Plate Base
Cables and User manual
Power Cord DP Cable Energy Label Quick Start Guide
x 4 x 4
Remote Control Warranty Card Screws(M5) Screws(M4) Screwdriver
User’s Manual
8
INSTALLATION INSTRUCTIONS
INSTALL
REMOVE
Figure.1. Installing and Removing the Base
POWER
POWER SOURCE:
1. Make sure that the power cord is the correct type required in your area.
2. This LCD monitor has an Internal universal power supply that allows operation in either
100/120V AC or 220/240V AC voltage area (No user adjustment is required.)
3. Connect the AC-power cord one end to your LCD monitor’s AC-input socket, the other end to
wall-outlet.
User’s Manual
9
ADJUSTING DISPLAY HEIGHT
1. In order to achieve the best visual effects, it is recommended that the display be adjusted so that
the entire screen is facing you before you adjust the display height according to your personal
preference.
2. Hold the top edge of the display (fig. A), to adjust it to appropriate height (fig. B).
Note
Be sure not to exert pressure on the LCD while adjusting the height to prevent damaging or
cracking the screen.
Keep your fingers or hands away from the height adjustment mechanism (fig. C ) to prevent
injury.
User’s Manual
10
SETTING THE MONITOR ON THE WALL
DISSEMBLING THE STAND BASE:
1. Disconnect all the cables and cords from the Monitor to prevent breakage.
2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to
prevent any damage to the Monitor.
(For reference only)
WALL MOUNTING THE MONITOR:
1. Purchase a VESA compatible wall bracket:
VESA 75×75, 4 holes, M4, 16mm, 23kg.
2. Locate your ideal Monitor position on the wall.
3. Fix the wall bracket firmly on the wall.
4. Secure the Monitor to the bracket using
the 4 mount holes on the back and center
of the Monitor.
Note:
Please read the instructions of your specific wall bracket to properly wall mount the Monitor.
The pitch of the mounting holes is 75mm horizontally and 75mm vertically.
The screws type required is metric: M4, 16mm length.
The Monitor stand base can be screwed on a table or a hard surface using the hole on the back of
the stand base.
For use only with UL listed wall mount bracket.
*Installing the LCD Monitor requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. HANNspree bears no
responsibility for improper mounting or mounting that results in accident or injury. You can ask a
qualified service personnel about using an optional bracket to mount the Monitor to the wall.
User’s Manual
11
MAKING CONNECTIONS
CONNECTING TO A PC
You can setup your monitor with the below suggested connections. Ensure your monitor is off during
this process.
1. Connect one end of the DP cable to the back of the monitor and connect the other end to the
computer’s DP port.
2. Connect one end of the HDMI cable (optional) to the back of the monitor and connect the other
end to the computer’s HDMI port.
3. Connect one end of the HDMI to DVI cable (optional) to the back of the monitor and connect the
other end to the computer’s DVI port.
4. Connect one end of the Type-C cable (optional) to the back of the monitor and connect the other
end to the computer’s Type-C port.
5. Connect the audio cable between the monitor's audio input and the PC's audio output (green
port).
6. Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other end to
Wall outlet.
7. Turn on your monitor and computer.
Figure.2. Connecting to a PC
1 Type-C 2 HDMI Input
3 DP Input 4 AUDIO OUT
5 USB OUT 6 USB IN
7 Power AC Input
User’s Manual
12
ADJUSTING THE VIEWING ANGLE
For optimal viewing it is recommended to look at the full face of the monitor, then adjust the
monitor’s angle to your own preference.
Hold the stand so you do not topple the monitor when you change the monitor’s angle.
You may adjust the monitor for a viewing angle of -5° to 15°vertically and -15° to 15°
horizontally.
Figure.3. Monitor Angle
NOTES:
Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD
screen.
Be careful not to place fingers or hands near the hinges when tilting the monitor, otherwise
pinching can result.
User’s Manual
13
OPERATING INSTRUCTIONS
GENERAL INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control buttons are located on the
front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to
your personal preferences.
The power cord should be connected.
Connect your display cable from the monitor to your devices display input port.
Press the power button to turn on the monitor. The power indicator will light up.
Menu / Enter
[－]
Volume adjustment button
[＋]
Brightness adjustment button
Input source change/ Return
Power Button
Figure.4. Control Panel Buttons
User’s Manual
14
FRONT PANEL CONTROL
Power Button:
Press this button to switch ON/OFF of monitor’s power.
Power Indicator:
Blue — Power On mode.
Red — Power Saving mode.
MENU / ENTER:
Turn the OSD menu on/off or enter to the previous menu.
Adjust ▲▼:
1. Adjust Brightness and volume when the OSD is off.
2. Navigate through adjustment icons when OSD is ON or adjust a function when function is
activated.
【 E 】Button: 《Digital Input Models》
1. Press【 E 】to enter Source selections. (Selections include DP, HDMI, etc. The actual selections
may very depending on the models. This function is only available in models with digital
inputs)
2. The OSD menu is used as《confirmation》function during start-up.
NOTES:
Do not install the monitor in a location near heat sources such as radiators or air dusts, or in a
place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
Save the original shipping box and packing materials, as they will come in handy if you ever have
to ship your monitor.
For maximum protection, repackage your monitor as it was originally packed at the factory.
To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be
removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents
such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
User’s Manual
15
HOW TO ADJUST A SETTINGS
INPUT SOURCE
AUTO SOURCE From the Signal Selection menu, select the「AUTO SOURCE」
option to activate the automatic signal search function.
DP Select the [DP] option to change the DP source.
HDMI Select the [HDMI] option to change the HDMI source.
BRIGHTNESS/ CONTRAST
BRIGHTNESS
Adjust the brightness value of the display according to your
preference. Select「BRIGHTNESS」option to adjust the
brightness value.
CONTRAST
Adjust the contrast value of the display according to your
preference. Select「CONTRAST」option to adjust the contrast
value.
ACTIVE CONTRAST
Optimal setting for high contrast images or videos. The dark and
light areas of the image are automatically detected, and the
contrast is enhanced to provide a clearer, sharper image. Also,
you may select the「ACTIVE CONTRAST」option.
COLOR SETTING
GAMMA Setup the display gamma through the gamma function. Available
settings are Off/ 1.8/ 2.0/ 2.2/ 2.4/ 2.6.
PICTURE MODE Select the picture mode according to your preference: PC/ ECO/
Movie/ Game.
COLOR TEMPERATURE Adjust the color temperature value of the display according to
your preference: Normal/ Warm/ Cool.
USER
Move the cursor to the User option and select it,
1. To adjust the red, enter the「Red」option and adjust the level.
2. To adjust the green, enter the「Green」option and adjust the
level.
3. To adjust the blue, enter the「Blue」option and adjust the level.
HUE Select the「HUE」option to adjust the hue of the display.
SATURATION Select the「SATURATION」option to adjust the saturation of the
display.
LOW BLUE LIGHT Select the「LOW BLUE LIGHT」option to adjust the low blue
light of the display.
User’s Manual
16
PICTURE QUALITY SETTING
SHARPNESS Select the「Sharpness」option to adjust the sharpness of the
display.
RESPONSE TIME Setup the display response time through the response time
function. Available settings are Off/ High/ Middle/ Low.
SUPER RESOLUTION Select the super resolution according to your preference: Off/
High/ Middle/ Low.
BLACK LEVEL Select the「Black Level」option to adjust the black level of the
display.
DISPLAY
ASPECT RATIO Setup the aspect ratio of screen through the aspect ratio function.
Available settings are Wide Screen/ 4:3/ 1:1/ Auto.
AUDIO
MUTE
Select the「Mute」option to switch the function On or Off. [The
availability of this function depends upon the selected model.
Adjusting the volume while muted cancels Mute mode.]
VOLUME
Select the「Vo l u m e 」option to change the volume level. Enter the
option and adjust the level. [This function applies only to models
with incorporated audio.]
● By high volume, risk of hearing damage exists.
AUDIO SOURCE While transferring via the PIP/ PBP, it can select the audio
source between DP or HDMI. [For DP/HDMI Input only]
MULTI-WINDOW
MULTI-WINDOW Select the「MULTI-WINDOW」option to switch the PIP/ PBP
function.
SUB WIN2 INPUT Select「SUB WIN2 INPUT」option to change the input source of
the PIP/ PBP. Enter the option and select DP or HDMI (2.0).
PIP SIZE Select「PIP SIZE」option to change the window size. Available
settings are Small/ Medium/ Large.
PIP POSITION
Select「PIP POSITION」option to change the window position.
Available settings are Top Left/ Bottom Left/ Top Right/ Bottom
Right.
SWAP Select「SWAP」option to change the 1st and 2nd window.
OSD
User’s Manual
17
LANGUAGE
Select「LANGUAGE」option to change the language of the OSD.
Enter the option and select a language. [Reference only, the OSD
Language depends on the selected model]
H-POSITION Select「 H-POSITION」option to adjust the horizontal position of
the OSD. Enter the option and adjust the level.
V-POSITION Select「V-POSITION」option to adjust the vertical position of the
OSD. Enter the option and adjust the level.
TRANSPARENCY Select「TRANSPARENCY」option to adjust the transparency of
the OSD. Enter the option and adjust the level.
OSD TIME OUT Select「OSD TIME OUT」option to set the OSD time out from 5
to 60 seconds. Enter the option and adjust the level.
OSD ROTATION Select「OSD ROTATION」option to rotate the window of the
OSD. Available settings are Normal/ 90/ 180/ 270.
OTHER
DP VERSION Select the「DP VERSION」option to switch the function DP1 or
DP2
ADAPTIVE-SYNC Select the「ADAPTIVE-SYNC」option to change the
ADAPTIVE-SYNC function.
HDR Select the「HDR」option to change the HDR function.
CROSS Select the「CROSS」option to change the CROSS function.
DDC/CI Select the 「DDC/CI」option to switch the function On or Off.
[Dual input mode optional]
RESET Select the「RESET」option to reset to the monitor’s default
setting. This will erase the current settings.
User’s Manual
18
PLUG AND PLAY
Plug & Play DDC2B Feature
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD.
It allows the monitor to inform the host system of its identity and, depending on the level of DDC
used, communicate additional information about its display capabilities. The DDC2B is a
bidirectional data channel based on the I²C protocol. The host can request EDID information over the
DDC2B channel.
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO
INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE
MUST BE A VIDEO INPUT SIGNAL.
User’s Manual
19
TECHNICAL SUPPORT (FAQ)
Q & A FOR GENERAL PROBLEMS
PROBLEM & QUESTION POSSIBLE SOLUTION
Power LED is not on *Check if the Power Switch is in the ON position.
*Power Cord should be connected.
No Plug & Play
*Check if the PC system is Plug & Play compatible.
*Check if the Video Card is Plug & Play compatible.
*Check if any plug pins on the HDMI or DP
connector are bent.
The display is too dark or too bright. *Adjust the Contrast and Brightness Controls.
Picture bounces or a wave pattern is
present in the picture
*Move electrical devices that may cause electrical
interference.
The power LED is ON (Blue) but there’s
no video or no picture.
*Computer Power Switch should be in the ON
position.
*Computer Video Card should be snugly seated in its
slot.
*Make sure monitor’s video cable is properly
connected to the computer.
*Inspect monitor’s video cable and make sure none
of the pins are bent.
*Make sure computer is operational by hitting the
CAPS LOCK key on the keyboard while observing
the CAPS LOCK LED. The LED should either turn
ON or OFF after hitting the CAPS LOCK key.
Missing one of the primary colors (RED,
GREEN, or BLUE)
*Inspect the monitor’s video cable and make sure that
none of the pins are bent.
Screen image is not centered or sized
properly. * Adjust pixel frequency CLOCK and PHASE.
Picture has color defects
(White does not look white) *Adjust RGB color or select color temperature.
The screen resolution needs to be adjusted
*Use Windows 7/ Windows 8/ Windows 10 Right
click anywhere on desktop and select
Properties>Settings>Screen Resolution. Use the
silder to adjust the reslution and click Apply.
No sound is outputted from monitor’s
built-in speaker
*Make sure PC audio output cable is connected to
screen’s LINE IN port (or AUDIO IN port).
*Make sure the sound volume adjustment can be
clearly identified.
*Make sure the System > Silence option in the
monitor menu is on.
*While transferring via HDMI port but no sound is
outputted, it is recommended to select AUDIO
User’s Manual
20
INPUT as a PC option, and make sure PC audio
output cable is connected to monitor’s LINE IN
port(or AUDIO IN port). [For HDMI Input only]
Addendum related to Windows 7 / Windows 8 / Windows 10
When you encounter display problem under Windows 7/ Windows 8/ Windows 10, you need to do
the following:
1. Make sure your PC computer (Hardware requirement) can support Windows 7/ Windows 8/
Windows 10.
2. Make sure your video card can run Windows 7/ Windows 8/ Windows 10.
3. If your video card can support Windows 7/ Windows 8/ Windows 10, need to install the latest
Windows 7/ Windows 8/ Windows 10 driver of your video card.
Suggest to do the following:
1. Install the latest Windows 7/ Windows 8/ Windows 10 video driver of your video card.
2. Try to use the recommended display resolution that is supported by the monitor.
3. If the recommended display resolution is not working, try the second recommended display
resolution.
1 2
35,56cm / 14” (16:9) 1366×768@60Hz 1366×768@50Hz
39,6cm / 15.6” (16:9) 1366×768@60Hz 1366×768@75Hz
40,64cm / 16” (16:9) 1366×768@60Hz 1366×768@50Hz
43,2cm / 17” (16:10) 1440×900@60Hz 1440×900@75Hz
47cm / 18.5” (16:9) 1366×768@60Hz 1366×768@75Hz
48,3cm / 19” (5:4) 1280×1024@60Hz 1280×1024@75Hz
48,3cm / 19” (16:10) 1440×900@60Hz 1440×900@75Hz
51cm / 20” (16:9) 1600×900@60Hz 1600×900@50Hz
56cm / 22” (16:10) 1680×1050@60Hz 1680×1050@50Hz
54,6cm / 21.5” (16:9)
58,4cm / 23” (16:9)
60cm / 23.6” (16:9)
62,5cm / 24.6 (16:9)
68,6cm / 27 ” (16:9)
1920×1080@60Hz 1920×1080@50Hz
70cm / 27.5” (16:10) 1920×1200@60Hz 1920×1200@50Hz
71cm / 28” (16:9) 1920×1080@60Hz 1920×1080@50Hz
71,1cm / 28” (16:9) 3840 × 2160 @60Hz 3840 × 2160 @50Hz
97,8cm/38.5”(16:9) 2560 x 1440@60Hz 2560 x 1440@120Hz
86,4cm/34”(21:9) 3440x1440@60Hz 3440x1440@50Hz
111,25cm/43.8”(32:9) 3840 × 1080 @60Hz 3840 × 1080 @120Hz
And if you still have display problem after doing the above procedure, please visit Hannspree
support and Service Website: http://www.hannspree.eu/en/monitors
Windows is a registered trademark of Microsoft Corporation.
User’s Manual
21
ERROR MESSAGE & POSSIBLE SOLUTIONS
CABLE NOT CONNECTED:
1. Check that the signal-cable is properly connected, if the connector is loose, tighten the
connector’s screws.
2. Check the signal-cable’s connection pins for damage.
INPUT NOT SUPPORT :
Your computer has been set to unsuitable display mode, set the computer to display mode given
in the following table.
FACTORY PRESET TIMING TABLE:
MODE RESOLUTION HORIZONTAL
FREQUENCY (KHz)
VERTICAL
FREQUENCY (Hz)
1 720×400 @70Hz 31.469 70.087
2 640×480 @60Hz 31.469 59.940
3 640×480 @67Hz 35.000 66.667
4 640×480 @72Hz 37.861 72.809
5 640×480 @75Hz 37.500 75.000
6 800×600 @56Hz 35.156 56.250
7 800×600 @60Hz 37.879 60.317
8 800×600 @72Hz 48.077 72.188
9 800×600 @75Hz 46.875 75.000
10 832×624 @74.6Hz 49.725 74.500
11 1024×768 @60Hz 48.363 60.004
12 1024×768 @70Hz 56.476 70.069
13 1024×768 @75Hz 60.023 75.029
14 1280×1024 @75Hz 79.976 75.025
15 1152×870 @75Hz 68.681 75.062
16 1280x800 @60Hz 49.306 59.910
17 1600×1200 @60Hz 75.000 60.000
18 1280×720 @60Hz 45.000 60.000
19 1280×1024 @60Hz 63.981 60.020
20 1920×1440 @60Hz 86.400 60.000
21 1600×900 @60Hz 55.540 59.978
22 1680×1050 @60Hz 64.674 59.883
23 1920×1080 @60Hz 66.587 59.934
24 640x480p @60Hz 31.500 60.000
25 720×480p @60Hz 31.500 59.980
26 720×576p @50Hz 31.250 50.000
27 720×576p @50Hz 31.250 50.000
28 1280×720p @50Hz 37.500 50.000
User’s Manual
22
29 1280×720p @60Hz 45.000 60.000
30 1920×1080p @50Hz 56.250 50.000
31 1920×1080p @60Hz 67.500 60.000
32 1920×1080p @120Hz 127.000 120.000
33 1920×1080p @100Hz 127.000 100.000
34 2560×1080p @60Hz 54.000 50.000
35 2560×1080p @100Hz 108.000 100.000
36 3840×1080p @68Hz 64.800 60.000
37 3840×1080p @120Hz 129.600 120.000
(Video mode)
MODE RESOLUTION
1 640×480p @60Hz
2 720×480i @60Hz
3 720×480p @60Hz
4 720×576i @50Hz
5 720×576p @50Hz
6 1280×720p @60Hz
7 1920×1080i @50Hz
8 1920×1080i @60Hz
9 1920×1080p @50Hz
10 1920×1080p @60Hz
11 2560×1080p @50Hz
12 2560×1080p @60Hz
13 3840×1080p @68Hz
14 3840×1080p @120Hz
** We ensure that the monitor can be lighted under interlace signal mode, but we can not guarantee
the image quality.
User’s Manual
23
APPENDIX
SPECIFICATIONS
Driving system TFT Color LCD
Size 111,25cm / 43.8” Diagonal
LCD Panel
Pixel pitch 0,279mm(H) × 0,279mm(V)
H-Frequency 30KHz – 165KHz
Video
V-Frequency 56Hz – 120Hz
Display Colors 1.07G Colors
Max. Resolution 3840 × 1080 @120Hz
Plug & Play VESA DDC2BTM
ON Mode 46.5W (Typical)
Power Saving Mode ≤ 0.5W
Power consumption
OFF Mode ≤ 0.3W
Audio output Rated Power 2.0 W rms (Per channel)
Input Terminal
DP 1.4 x 2
HDMI 2.0 ×2
AUDIO OUT
Type-C
USB IN
Maximum Screen Size Hor. : 1071.36mm
Ver. : 301.32mm
Power Source AC 100–240V ～2.2A 50/60Hz
Environmental
Considerations
Operating Temp:5° to 35°C
Storage Temp.: -20° to 60°C
Operating Humidity: 10% to 85%
Dimensions 1089.4 (W)×286.8(H)×452.4~547.4(D) mm
42.9”(W)×11.3”(H)×17.8~21.5”(D)
Weight (NW) 11.72 kg (25.8 lb)
*** The above specification is subject to actual product specification and is subject to change
without prior notice.
NOTES:
The Maximum Resolution will depends on the display card supporting. Related issue can refer to
http://www.hannspree.eu/en/monitors. FAQ section.