Table of Contents
- How do I?
- Get started
- Copy and scan
- Fax
- Use Web Services
- Work with cartridges
- Connect Your Printer
- Solve a problem
- Technical information
- Hewlett-Packard Company notices
- Specifications
- Environmental product stewardship program
- Eco-Tips
- Paper use
- Plastics
- Material safety data sheets
- HP inkjet supplies recycling program
- Power consumption
- Disposal of waste equipment by users
- Chemical substances
- Battery disposal in Taiwan
- Battery notice for Brazil
- California Perchlorate Material Notice
- EPEAT
- European Union Commission Regulation 1275/2008
- The Table of Hazardous Substances/Elements and their Content (China)
- Restriction of hazardous substance (Ukraine)
- Restriction of hazardous substance (India)
- China Energy Label for Printer, Fax and Copier
- Regulatory information
- Regulatory model identification number
- FCC statement
- Notice to users in Korea
- VCCI (Class B) compliance statement for users in Japan
- Notice to users in Japan about the power cord
- Noise emission statement for Germany
- GS Statement (Germany)
- Declaration of conformity
- European Union Regulatory Notice
- Australia wired fax statement
- Notice to users of the U.S. telephone network: FCC requirements
- Notice to users of the Canadian telephone network
- Notice to users of the German telephone network
- Regulatory information for wireless products
- Additional fax setup
- Set up faxing (parallel phone systems)
- Select the correct fax setup for your home or office
- Case A: Separate fax line (no voice calls received)
- Case B: Set up the printer with DSL
- Case C: Set up the printer with a PBX phone system or an ISDN line
- Case D: Fax with a distinctive ring service on the same line
- Case E: Shared voice/fax line
- Case F: Shared voice/fax line with voice mail
- Case G: Fax line shared with computer modem (no voice calls received)
- Case H: Shared voice/fax line with computer modem
- Case I: Shared voice/fax line with answering machine
- Case J: Shared voice/fax line with computer modem and answering machine
- Case K: Shared voice/fax line with computer dial-up modem and voice mail
- Serial-type fax setup
- Test fax setup
- Set up faxing (parallel phone systems)
- Index
HP 4652 User Manual
Displayed below is the user manual for 4652 by HP which is a product in the Multifunctionals category. This manual has pages.
Related Manuals
HP OfficeJet 4650 All-in-One series
Table of contents
1 How do I? ...................................................................................................................................................... 1
2 Get started ................................................................................................................................................... 2
Accessibility ........................................................................................................................................................... 2
Printer parts ........................................................................................................................................................... 3
Control panel and status lights ............................................................................................................................. 4
Paper basics ........................................................................................................................................................... 6
Load media ............................................................................................................................................................. 8
Load original ........................................................................................................................................................ 10
Open the HP printer software (Windows) ........................................................................................................... 11
Sleep mode .......................................................................................................................................................... 12
Quiet Mode ........................................................................................................................................................... 12
3 Print ........................................................................................................................................................... 14
Print documents .................................................................................................................................................. 14
Print photos ......................................................................................................................................................... 15
Print Quick Forms ................................................................................................................................................ 16
Print on both sides (duplexing) ........................................................................................................................... 16
Print from your mobile device ............................................................................................................................. 17
Print with AirPrint ................................................................................................................................................ 17
Print using the maximum dpi .............................................................................................................................. 18
Tips for print success ........................................................................................................................................... 19
4 Copy and scan .............................................................................................................................................. 21
Copy documents .................................................................................................................................................. 21
Scan ...................................................................................................................................................................... 22
Tips for copy and scan success ........................................................................................................................... 26
5 Fax ............................................................................................................................................................. 28
Send a fax ............................................................................................................................................................ 28
Receive a fax ........................................................................................................................................................ 32
Set up phone book contacts ................................................................................................................................ 36
Change fax settings ............................................................................................................................................. 38
Fax and digital phone services ............................................................................................................................ 42
Fax on Voice over Internet Protocol .................................................................................................................... 42
Use reports .......................................................................................................................................................... 42
ENWW iii
6 Use Web Services ......................................................................................................................................... 46
What are Web Services? ...................................................................................................................................... 46
Set up Web Services ............................................................................................................................................ 46
Print with HP ePrint ............................................................................................................................................. 48
Use HP Printables ................................................................................................................................................ 49
Use the HP Connected website ............................................................................................................................ 49
Remove Web Services ......................................................................................................................................... 49
Tips for using Web Services ................................................................................................................................. 49
7 Work with cartridges ................................................................................................................................... 50
Check the estimated ink levels ............................................................................................................................ 50
Replace the cartridges ......................................................................................................................................... 51
Order ink supplies ................................................................................................................................................ 52
Use single-cartridge mode .................................................................................................................................. 53
Cartridge warranty information .......................................................................................................................... 53
Tips for working with cartridges ......................................................................................................................... 54
8 Connect Your Printer .................................................................................................................................... 55
Set up the printer for wireless communication .................................................................................................. 55
Connect wirelessly to the printer without a router ............................................................................................ 57
Change network settings .................................................................................................................................... 59
Advanced printer management tools (for networked printers) ......................................................................... 60
Tips for setting up and using a networked printer ............................................................................................. 62
9 Solve a problem ........................................................................................................................................... 63
Jams and paper-feed issues ................................................................................................................................ 63
Ink cartridge issues .............................................................................................................................................. 68
Printing issues ..................................................................................................................................................... 69
Copy issues .......................................................................................................................................................... 77
Scan issues ........................................................................................................................................................... 77
Fax issues ............................................................................................................................................................. 77
Network and connection issues .......................................................................................................................... 86
Printer hardware issues ...................................................................................................................................... 87
HP support ........................................................................................................................................................... 88
Appendix A Technical information ................................................................................................................... 90
Hewlett-Packard Company notices ..................................................................................................................... 90
Specifications ....................................................................................................................................................... 90
Environmental product stewardship program ................................................................................................... 92
iv ENWW
Regulatory information ....................................................................................................................................... 96
Appendix B Additional fax setup .................................................................................................................... 107
Set up faxing (parallel phone systems) ............................................................................................................ 107
Serial-type fax setup ......................................................................................................................................... 128
Test fax setup .................................................................................................................................................... 129
Index ........................................................................................................................................................... 130
ENWW v
vi ENWW
2 Get started
This section contains the following topics:
●Accessibility
●Printer parts
●Control panel and status lights
●Paper basics
●Load media
●Load original
●Open the HP printer software (Windows)
●Sleep mode
●Quiet Mode
Accessibility
The printer provides a number of features that make it accessible for people with disabilities.
Visual
The HP software provided with the printer is accessible for users with visual impairments or low vision by
using your operating system's accessibility options and features. The software also supports most assistive
technology such as screen readers, Braille readers, and voice-to-text applications. For users who are color
blind, colored buttons and tabs used in the HP software have simple text or icon labels that convey the
appropriate action.
Mobility
For users with mobility impairments, the HP software functions can be executed through keyboard
commands. The HP software also supports Windows accessibility options such as StickyKeys, ToggleKeys,
FilterKeys, and MouseKeys. The printer doors, buttons, paper trays, and paper-width guides can be operated
by users with limited strength and reach.
Support
For more details about the accessibility of this printer and HP's commitment to product accessibility, visit
HP's website at www.hp.com/accessibility.
For accessibility information for OS X, visit the Apple website at www.apple.com/accessibility.
2 Chapter 2 Get started ENWW
Printer parts
Front view
Figure 2-1 Front and top views of HP OfficeJet 4650 All-in-One series
Feature Description
1Lid
2Lid-backing
3Scanner glass
4Document feeder
5Cartridge access door
6Paper path cover
7Ink cartridges
8On button (also referred to as the Power button)
9Front panel
10 Printer display
11 Automatic output tray extender (also referred to as the tray extender)
12 Paper-width guides
13 Paper tray
14 Paper tray door
ENWW Printer parts 3
Back view
Figure 2-2 Rear view of HP OfficeJet 4650 All-in-One series
Feature Description
1Fax port (2-EXT)
2Fax port (1-LINE)
3Power connection. Use only the power cord supplied by HP.
4Rear USB port
Control panel and status lights
Overview of buttons and lights
The following diagram and related table provides a quick reference to the printer control panel features.
Label Name and Description
1On button: Turns the printer on or off.
2Back button: Returns to the previous screen.
3Help button: Opens the Help menu for the current operation.
4Home button: Returns to the Home screen, the screen that is displayed when you first turn on the printer.
5Control panel display: Touch the screen to select menu options, or scroll through the menu items.
6Wireless light: Indicates the status of the printer wireless connection.
●Solid blue light indicates that wireless connection has been established and you can print.
●Slow blinking light indicates that wireless is on, but the printer is not connected to a network. Make sure your printer is
within the range of wireless signal.
4 Chapter 2 Get started ENWW
Label Name and Description
●Fast blinking light indicates wireless error. Refer to the message on the printer display.
●If wireless is turned off, the wireless light is off and the display screen shows Wireless Off.
Control panel display icons
Icon Purpose
Copy : Opens the Copy menu where you can select a copy type or change the copy settings.
Scan : Opens the Scan menu where you can select a destination for your scan.
Fax : Displays a screen where you can send a fax, or change fax settings.
HP Printables: Provides a quick and easy way to access and print information from the web, such as coupons,
coloring pages, puzzles, and more.
Quick Forms : Using HP Quick Forms, you can print calendars, check lists, games, notebook paper, graph paper,
and music paper.
Setup : Opens the Setup menu where you can change preferences and use tools to perform maintenance
functions.
Help : Opens the Help menu where you can view How To videos, printer feature information, and tips.
ePrint icon: Opens the Web Services Summary menu, where you can check ePrint status details, change ePrint
settings, or print an Info page.
Wi-Fi Direct icon: Opens the Wi-Fi Direct menu where you can turn on Wi-Fi Direct, turn off Wi-Fi Direct, and
display the Wi-Fi Direct name and password.
Wireless icon: Opens the Wireless Summary menu where you can check wireless status and change wireless
settings. You can also print a wireless test report, helping diagnose network connection issues.
Ink icon: Shows estimated ink levels by cartridge. Displays a warning symbol if the ink level is less than the
minimum expected ink level.
NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-
ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do
not need to replace cartridges until the print quality becomes unacceptable.
Fax Status icon: Displays status information for the Auto Answer function, fax logs, and the fax sound volume.
ENWW Control panel and status lights 5
Paper basics
The printer is designed to work well with most types of office paper. It is best to test a variety of print paper
types before buying large quantities. Use HP paper for optimum print quality. Visit the HP website at
www.hp.com for more information about HP paper.
HP recommends plain papers with the ColorLok logo for printing everyday documents. All
papers with the ColorLok logo are independently tested to meet high standards of
reliability and print quality, and produce documents with crisp, vivid color, bolder blacks,
and that dry faster than ordinary plain papers. Look for papers with the ColorLok logo in
a variety of weights and sizes from major paper manufacturers.
This section contains the following topics:
●Recommended papers for printing
●Order HP paper supplies
●Tips for selecting and using paper
Recommended papers for printing
If you want the best print quality, HP recommends using HP papers that are specifically designed for the type
of project you are printing.
Depending on your country/region, some of these papers might not be available.
Photo printing
●HP Premium Plus Photo Paper
HP Premium Plus Photo Paper is HP’s highest-quality photo paper for your best photos. With HP
Premium Plus Photo Paper, you can print beautiful photos that are instant-dry so you can share them
right off the printer. It is available in several sizes, including A4, 8.5 x 11 inches (216 x 279 mm), 4 x 6
inches (10 x 15 cm), and 5 x 7 inches (13 x 18 cm), and in two finishes - glossy or soft gloss (semi-gloss).
Ideal for framing, displaying, or gifting your best photos and special photo projects. HP Premium Plus
Photo Paper delivers exceptional results with professional quality and durability.
●HP Advanced Photo Paper
This glossy photo paper features an instant-dry finish for easy handling without smudging. It resists
water, smears, fingerprints, and humidity. Your prints have a look and feel comparable to a store-
processed photo. It is available in several sizes, including A4, 8.5 x 11 inches (216 x 279 mm), 4 x
6 inches (10 x 15 cm), and 5 x 7 inches (13 x 18 cm). It is acid-free for longer lasting documents.
●HP Everyday Photo Paper
Print colorful, everyday snapshots at a low cost, using paper designed for casual photo printing. This
affordable photo paper dries quickly for easy handling. Get sharp, crisp images when you use this paper
with any inkjet printer. It is available in glossy finish in several sizes, including A4, 8.5 x 11 inches (216 x
279 mm), 5 x 7 inches (13 x 18 cm), and 4 x 6 inches (10 x 15 cm). It is acid-free for longer lasting
documents.
●HP Photo Value Packs
HP Photo Value Packs conveniently package original HP ink cartridges and HP Advanced Photo Paper to
save you time and take the guesswork out of printing affordable, lab-quality photos with your HP
6 Chapter 2 Get started ENWW
printer. Original HP inks and HP Advanced Photo Paper have been designed to work together so your
photos are long lasting and vivid, print after print. Great for printing out an entire vacation's worth of
photos or multiple prints to share.
Business documents
●HP Premium Presentation Paper 120g Matte or HP Professional Paper 120 Matt
This paper is a heavy two-sided matte paper perfect for presentation, proposals, reports, and
newsletters. It is heavyweight for an impressive look and feel.
●HP Brochure Paper 180g Glossy or HP Professional Paper 180 Glossy
These papers are glossy-coated on both sides for two-sided use. They are the perfect choice for near-
photographic reproductions and business graphics for report covers, special presentations, brochures,
mailers, and calendars.
●HP Brochure Paper 180g Matte or HP Professional Paper 180 Matt
These papers are matte-coated on both sides for two-sided use. They are the perfect choice for near-
photographic reproductions and business graphics for report covers, special presentations, brochures,
mailers, and calendars.
Everyday printing
All the papers listed for everyday printing feature ColorLok Technology for less smearing, bolder blacks, and
vivid colors.
●HP Bright White Inkjet Paper and Color Inkjet Paper
HP Bright White Inkjet Paper and Color Inkjet Paper deliver high-contrast colors and sharp text. They are
opaque enough for two-sided color usage with no show-through, making them ideal for newsletters,
reports, and flyers.
●HP Multipurpose and All-in-One Printing Paper
HP Multipurpose and All-in-One Printing Paper is a high-quality multifunction paper. It produces
documents that look and feel more substantial than documents printed on standard multipurpose or
copy paper. It is acid-free for longer lasting documents.
●HP Office, Copy, and Copy & Print Paper
These varieties of HP paper high-quality multifunction paper are suitable for copies, drafts, memos, and
other everyday documents. They are acid-free for longer lasting documents.
●HP Office Recycled Paper
HP Office Recycled Paper is a high-quality multifunction paper made with 30% recycled fiber.
Order HP paper supplies
The printer is designed to work well with most types of office paper. Use HP paper for optimum print quality.
To order HP papers and other supplies, go to www.hp.com . At this time, some portions of the HP website are
available in English only.
HP recommends plain papers with the ColorLok logo for printing and copying of everyday documents. All
papers with the ColorLok logo are independently tested to meet high standards of reliability and print
quality, and produce documents with crisp, vivid color, bolder blacks and shorter dry-time than ordinary plain
papers. Look for papers with the ColorLok logo in a variety of weights and sizes from major paper
manufacturers.
ENWW Paper basics 7
Tips for selecting and using paper
For the best results, observe the following guidelines.
●Load only one type of paper at a time into a tray or document feeder.
●When loading the tray and document feeder, make sure the paper is loaded correctly.
●Do not overload the tray or document feeder.
●To prevent jams, poor print quality, and other printing problems, avoid loading the following paper in
the tray or document feeder:
◦Multipart forms
◦Media that is damaged, curled, or wrinkled
◦Media with cutouts or perforations
◦Media that is heavily textured, embossed, or does not accept ink well
◦Media that is too lightweight or stretches easily
◦Media that contains staples or clips
Learn how to print photos on HP Photo Paper. Click here to go online for more information.
Learn about custom-size paper supported by your printer. Click here to go online for more information.
Load media
Select a paper size to continue.
To load small-size paper
1. Open the paper tray door.
2. Pull the paper tray out.
3. Load paper.
●Remove all paper from the paper tray, and then load the photo paper print side facing down and
HP logos facing up.
●Slide the photo paper forward until it stops.
8 Chapter 2 Get started ENWW
●Slide the paper-width guides firmly against the edge of the photo paper.
4. Push the paper tray back into the printer and close the paper tray door.
5. Change or retain the paper settings on the printer display.
Learn how to print photos on HP Photo Paper. Click here to go online for more information.
To load full-size paper
1. Open the paper tray door.
2. Pull the paper tray out and slide the paper-width guides outward.
3. Load paper.
●Insert a stack of paper into the paper tray with the short edge forward and the print side down.
●Slide the paper forward until it stops.
ENWW Load media 9
●Slide the paper-width guides inward until they stop at the edges of the paper.
4. Push the paper tray back in and close the paper tray door.
5. Change or retain the paper settings on the printer display.
Load original
To load original on the scanner glass
1. Lift the scanner lid.
2. Load the original print side down on the right front corner of the glass.
10 Chapter 2 Get started ENWW
3. Close the scanner lid.
To load an original in the document feeder
1. Open the document feeder cover.
2. Slide paper-width guides outwards.
3. Load original print-side up in the document feeder.
4. Slide paper-width guides inward until they stop at the edge of paper.
Open the HP printer software (Windows)
After installing the HP printer software, depending on your operating system, do one of the following:
ENWW Open the HP printer software (Windows) 11
●Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the printer
name.
●Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then select
the printer name.
●Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click the folder for the printer, and then select the icon with the printer's name.
Sleep mode
●Power usage is reduced while in the Sleep mode.
●After initial setup of printer, the printer enters the Sleep mode after five minutes of inactivity.
●The time to the Sleep mode can be changed from the control panel.
To set the Sleep mode time
1. From the Home screen, touch ( Setup ).
NOTE: If you do not see the Home screen, press the Home button.
2. Touch Power Handling.
3. Touch Sleep.
4. Touch After 5 minutes, or After 10 minutes, or After 15 minutes.
Quiet Mode
Quiet Mode slows down printing to reduce overall noise without affecting print quality. Quiet Mode only
works for printing with Normal print quality on plain paper. To reduce printing noise, turn on Quiet Mode. To
print at normal speed, turn Quiet Mode off. Quiet mode is off by default.
NOTE: In Quiet Mode, if you print on plain paper with the Draft or Best print quality, or if you print photos or
envelopes, the printer works in the same way as when Quiet Mode is off.
You can create a schedule by selecting the time when the printer prints in Quiet Mode. For example, you can
schedule the printer to be in Quiet Mode from 10 p.m. to 8 a.m. everyday. Quiet Mode is off by default.
Turn Quiet Mode on or off
To turn Quiet Mode on or off from the printer control panel
1. From the Home screen, touch Setup .
2. Touch Preferences .
3. Touch Quiet Mode.
4. Touch On or Off next to Quiet Mode.
To turn Quiet Mode on or off from the printer software (Windows)
1. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 11.
2. Click the Quiet Mode tab.
12 Chapter 2 Get started ENWW
3. Click On or Off.
4. Click Save Settings.
To turn Quiet Mode on or off from the Embedded Web Server (EWS)
1. Open the EWS. For more information, see Open the embedded Web server on page 61.
2. Click the Settings tab.
3. In the Preferences section, select Quiet Mode, and then select On or Off.
4. Click Apply.
Create a schedule for Quiet Mode
To create a schedule for Quiet Mode from the printer control panel
1. From the Home screen, touch Setup .
2. Touch Preferences .
3. Touch Quiet Mode.
4. Touch Off next to Quiet Mode to turn it on, and then touch OK to confirm.
5. Touch Off next to Schedule, and then change start time and end time of the schedule.
To turn Quiet Mode on or off from the printer software (Windows)
1. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 11.
2. Click the Quiet Mode tab.
3. Click On in the Quiet Mode area.
4. Specify the start time and stop time in the Schedule Quiet Mode area.
5. Click Save Settings.
To create a schedule for Quiet Mode from the Embedded Web Server (EWS)
1. Open the EWS. For more information, see Open the embedded Web server on page 61.
2. Click the Settings tab.
3. In the Preferences section, select Quiet Mode, and then select On in the Quiet Mode area.
4. Specify the start time and end time in the Schedule Quiet Mode area.
5. Click Apply.
ENWW Quiet Mode 13
3Print
Most print settings are automatically handled by the software application. Change the settings manually only
when you want to change print quality, print on specific types of paper, or use special features.
This section contains the following topics:
●Print documents
●Print photos
●Print Quick Forms
●Print on both sides (duplexing)
●Print from your mobile device
●Print with AirPrint
●Print using the maximum dpi
●Tips for print success
Print documents
Make sure paper is loaded into the paper tray.
To print a document (Windows)
1. From your software, select Print.
2. Make sure your printer is selected.
3. Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer
Setup, Printer Properties, Printer, or Preferences.
4. Select the appropriate options.
●On the Layout tab, select Portrait or Landscape orientation.
●On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list in the
Tray Selection area, and then select the appropriate print quality in the Quality Settings area.
●Click Advanced to select the appropriate paper size from the Paper Size drop-down list.
5. Click OK to close the Properties dialog box.
6. Click Print or OK to begin printing.
To print documents (OS X)
1. From the File menu in your software, choose Print.
2. Make sure your printer is selected.
3. Specify the page properties.
If you do not see options on the Print dialog, click Show Details.
14 Chapter 3 Print ENWW
NOTE: The following options are available for a USB connected printer. Locations for the options can
vary from one application to another.
●Choose the paper size.
NOTE: If you change the Paper Size ensure that you have loaded the correct paper and set the
paper size on the printer control panel to match.
●Select the orientation.
●Enter the scaling percentage.
4. Click Print.
NOTE: If your printed documents are not aligned within the margins of the paper, make sure that you have
selected the correct language and region. On the printer display, select Setup, and then select Preferences.
Select your language, and then region from the options provided. The correct language and country/region
settings ensure that the printer will have the appropriate default paper size settings.
Print photos
Make sure photo paper is loaded into the photo tray.
To print a photo from the printer software (Windows)
1. From your software, select Print.
2. Make sure your printer is selected.
3. Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer
Setup, Printer Properties, Printer, or Preferences.
4. Select the appropriate options.
●On the Layout tab, select Portrait or Landscape orientation.
●On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list in the
Tray Selection area, and then select the appropriate print quality in the Quality Settings area.
●Click Advanced to select the appropriate paper size from the Paper Size drop-down list.
5. Click OK to return to the Properties dialog box.
6. Click OK, and then click Print or OK in the Print dialog box.
To print a photo from the computer (OS X)
1. From the File menu in your software, choose Print.
2. Make sure your printer is selected.
3. Set the print options.
If you do not see options on the Print dialog, click Show Details.
NOTE: The following options are available for a USB connected printer. Locations for the options can
vary from one application to another.
a. Choose the appropriate paper size in the Paper Size pop-up menu.
ENWW Print photos 15
NOTE: If you change the paper size ensure that you have loaded the correct paper.
b. Select an Orientation.
c. From the pop-up menu, choose Paper Type/Quality, and then choose the following settings:
●Paper Type: The appropriate photo paper type
●Quality: Best or Maximum dpi
●Click the Color Options disclosure triangle, and then choose the appropriate Photo Fix
option.
◦Off: applies no changes to the image.
◦On: automatically focuses the image; moderately adjusts image sharpness.
4. Select any other print settings you want, and then click Print.
Learn how to print photos on HP Photo Paper. Click here to go online for more information.
Print Quick Forms
Use Quick Forms to print calendars, check lists, games, notebook paper, graph paper, music paper, and
games.
To print Quick Forms
1. From the Home screen on the printer display, touch Quick Forms.
TIP: If the Quick Forms option does not appear on the printer display, touch the Home button, and
then swipe to the right until you see Quick Forms .
2. Touch to select one of the Quick Forms options.
3. After you have selected the type of form that you want to print, select the number of copies, and then
touch Print.
Print on both sides (duplexing)
To print on both sides of the page
You can print on both sides of a sheet of paper automatically by using the automatic two-sided printing
mechanism (duplexer).
1. From your software, select Print.
2. Make sure your printer is selected.
3. Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer
Setup, Printer Properties, Printer, or Preferences.
4. Select the appropriate options.
16 Chapter 3 Print ENWW
●On the Layout tab, select Portrait or Landscape orientation, and select Flip on Long Edge or Flip
on Short Edge from the Print on Both Sides drop-down list.
●On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list in the
Tray Selection area, and then select the appropriate print quality in the Quality Settings area.
●Click the Advanced button, in the Paper/Output area, select the appropriate paper size from the
Paper Size drop-down list.
NOTE: If you change the Paper Size ensure that you have loaded the correct paper and set the
paper size on the printer control panel to match.
5. Click OK to print.
NOTE: After one page of the document has been printed, wait for the printer to reload the paper
automatically to print on the other side. You do not need to take any action.
To print on both sides of the page (OS X)
1. From the File menu in your software, choose Print.
2. In the Print dialog, choose Layout from the pop-up menu.
3. Choose the type of binding you want for your two-sided pages, and then click Print.
Print from your mobile device
With HP mobile printing technology, you can print from your smartphone or tablet to your printer easily.
If you are at home or office, to use the printing capabilities already on your smartphone or tablet to print:
1. Make sure your mobile device and printer are on the same network.
2. Select the photo or document you want to print and choose your printer.
3. Confirm print settings and print.
If you want to print without accessing the network, see Connect wirelessly to the printer without a router
on page 57 for more information.
If you are on the road, you can print a document by sending an email with the ePrint app to your ePrint
enabled printer. See Print with HP ePrint on page 48 for more information.
For more information, visit the HP Mobile Printing website ( www.hp.com/go/mobileprinting ).
Print with AirPrint
Printing using Apple’s AirPrint is supported for iOS 4.2 and Mac OS X 10.7 or later. Use AirPrint to print
wirelessly to the printer from an iPad (iOS 4.2), iPhone (3GS or later), or iPod touch (third generation or later)
in the following mobile applications:
●Mail
●Photos
●Safari
●Supported third-party applications, for example Evernote
ENWW Print from your mobile device 17
To use AirPrint, ensure the following:
●The printer and the Apple device must be connected to the same network as your AirPrint enabled
device. For more information about using AirPrint and about which HP products are compatible with
AirPrint, go to www.hp.com/go/mobileprinting .
●Load paper that matches the paper settings of the printer.
Print using the maximum dpi
Use maximum dots per inch (dpi) mode to print high-quality, sharp images on photo paper.
Printing in maximum dpi takes longer than printing with other settings and requires a large amount of disk
space.
To print in maximum dpi mode (Windows)
1. From your software, select Print.
2. Make sure your printer is selected.
3. Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer
Setup, Printer Properties, Printer, or Preferences.
4. Click the Paper/Quality tab.
5. From the Media drop-down list, select the appropriate paper type and print quality.
6. Click the Advanced button.
7. In the Printer Features area, select Yes from the Print in Max DPI drop-down list.
8. Select the appropriate paper size from the Paper Size drop-down list.
9. Click OK to close the advanced options.
10. Confirm Orientation on the Layout tab, and then click OK to print.
To print using maximum dpi (OS X)
1. From the File menu in your software, choose Print.
2. Make sure your printer is selected.
3. Set the print options.
If you do not see options on the Print dialog, click Show Details.
NOTE: The following options are available for a USB connected printer. Locations for the options can
vary from one application to another.
a. Choose the appropriate paper size in the Paper Size pop-up menu.
NOTE: If you change the Paper Size ensure that you have loaded the correct paper and set the
paper size on the printer control panel to match.
b. From the pop-up menu, choose Paper Type/Quality, and then choose the following settings:
18 Chapter 3 Print ENWW
●Paper Type: The appropriate paper type
●Quality: Maximum dpi
4. Select any other print settings that you want, and then click Print.
Tips for print success
Use the following tips to print successfully.
Tips for ink and paper
●Use original HP cartridges. Original HP cartridges are designed for and tested with HP printers to help
you produce great results, time after time.
●Make sure the cartridges have sufficient ink. To view the estimated ink levels, touch (Ink) from the
Home screen.
To learn more tips about working with cartridges, see Tips for working with cartridges on page 54 for
more information.
●Load a stack of paper, not just one page. Use clean and flat paper of the same size. Make sure only one
type of paper is loaded at a time.
●Adjust the paper-width guides in the paper tray to fit snugly against all paper. Make sure the paper-
width guides do not bend the paper in the paper tray.
●Set the print quality and paper size settings according to the type and size of paper loaded in the paper
tray.
●Learn how to print envelopes from your computer. Click here to go online for more information.
Printer settings tips
●On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list in the Tray
Selection area, and then select the appropriate print quality in the Quality Settings area.
●Select the appropriate paper size from the Paper Size drop-down list in the Advanced Options dialog
box. Access the Advanced Options dialog box by clicking the Advanced button on the Layout or Paper/
Quality tab.
●To change default print settings, click Print, Scan & Fax , and then click Set Preferences in the printer
software.
Depending on your operating system, do one of the following to open the printer software:
◦Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the
printer name.
◦Windows 8: On the Start screen, right-click an empty area on the screen, click All Apps on the app
bar, and then click the icon with the printer's name.
◦Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click HP OfficeJet 4650 series, and then click HP OfficeJet 4650 series.
●If you want to print a black and white document using black ink only, click the Advanced button. From
the Print in Grayscale drop-down menu, select Black Ink Only, then click the OK button.
ENWW Tips for print success 19
Printer settings tips (OS X)
●On the Print dialog, use the Paper Size pop-up menu to select the size of paper loaded in the printer.
●On the Print dialog, choose the Paper Type/Quality pop-up menu and select the appropriate paper type
and quality.
●To print a black and white document using only black ink, choose the Paper Type/Quality, click the
Color Options disclosure triangle, and choose Grayscale from the Color pop-up menu.
Notes
●Original HP ink cartridges are designed and tested with HP printers and papers to help you easily
produce great results, time after time.
NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Product service or repairs
required as a result of using a non-HP supply will not be covered under warranty.
If you believe you purchased original HP ink cartridges, go to:
www.hp.com/go/anticounterfeit
●Ink level warnings and indicators provide estimates for planning purposes only.
NOTE: When you receive a low-ink warning message, consider having a replacement cartridge
available to avoid possible printing delays. You do not need to replace the cartridges until print quality
becomes unacceptable.
●Software settings selected in the print driver only apply to printing, they do not apply to copying or
scanning.
●You can print your document on both sides of the paper.
20 Chapter 3 Print ENWW
4 Copy and scan
●Copy documents
●Scan
●Tips for copy and scan success
Copy documents
The Copy menu on the printer display allows you to easily select number of copies and color or black and
white for copying on plain paper. You can also easily access advanced settings, such as changing the paper
type and size, adjusting the darkness of the copy, and resizing the copy.
Make a 1-sided copy
1. Load the original print side up into the document feeder, or load the original print side down on the right
front corner of the scanner glass.
2. Specify number of copies and settings.
●From the Home screen, touch Copy . Select the desired number of copies.
●Touch (Settings) to specify paper size, paper type, quality, or other settings.
●If the 2–Sided option is ON, touch to select OFF.
●Touch (Back) to return to the Copy menu.
3. Touch Start Black or Start Color to start the copy job.
Make a 2-sided copy from the scanner glass
1. Load the original print side down on the right front corner of the scanner glass.
2. Specify number of copies and settings.
●From the Home screen, touch Copy . Select the desired number of copies.
●Touch (Settings), scroll through the options, and then touch Resize to make sure Actual is
selected.
NOTE: The 2-sided function does not work if the Fit to Page option is selected.
●If the 2–Sided option is OFF, touch to select ON.
●From the Settings screen, specify paper size, paper type, quality, or other settings.
●Touch (Back) to return to the Copy screen.
3. Touch Start Black or Start Color to start the copy job.
4. When prompted, load the second original and touch OK.
Make a 2-sided copy from the document feeder
1. Load 1-sided originals print side up into the document feeder.
ENWW Copy documents 21
●Use two 1-sided originals to create a 2-sided copy.
●Use multiple 1-sided original pages to create several pages of 2-sided copy. For example: eight
pages of 1-sided originals make four pages of 2-sided copy.
2. Specify number of copies and settings.
●From the Home screen, touch Copy . Select the desired number of copies.
●Touch (Settings), scroll through the options, and then touch Resize to make sure Actual is
selected.
NOTE: The 2-sided function does not work if the Fit to Page option is selected.
●If the 2–Sided option is OFF, touch to select ON.
●From the Settings screen, specify paper size, paper type, quality, or other settings.
●Touch (Back) to return to the Copy screen.
3. Touch Start Black or Start Color to start the copy job.
Make a 2-sided copy
1. Load the original print side up into the document feeder, or load the original print side down on the right
front corner of the scanner glass.
2. Specify number of copies and settings.
●From the Home screen, touch Copy . Select the desired number of copies.
●Touch (Settings), scroll through the options, and then touch Resize to make sure Actual is
selected.
NOTE: The 2-sided function does not work if the Fit to Page option is selected.
●If the 2–Sided option is OFF, touch to select ON.
●From the Settings screen, specify paper size, paper type, quality, or other settings.
●Touch (Back) to return to the Copy screen.
3. Touch Start Black or Start Color to start the copy job.
4. When prompted, load the second original and touch OK.
Scan
You can scan documents, photos, and other paper types, and save them to your computer. After scanning to
a computer is enabled, you can start scanning from the printer display or from the printer software on your
computer.
NOTE: Some scan functions are only available after you have installed the HP printer software.
●Scan to a computer
●Scan using Webscan
●Change scan settings (Windows)
●Create a new scan shortcut (Windows)
22 Chapter 4 Copy and scan ENWW
Scan to a computer
Before scanning to a computer, make sure you have already installed the HP recommended printer software.
The printer and computer must be connected and turned on.
In addition, on Windows computers, the printer software must be running prior to scanning.
To enable the scan to a computer feature (Windows)
The scan to a computer feature is enabled by default from the factory. Follow these instructions if the
feature has been disabled, and you wish to enable it again.
1. Depending on your operating system, do one of the following to open the HP printer software:
●Windows 8.1: Click the down arrow in lower left corner of the Start screen, select the printer
name, and then click Utilities.
●Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, select the
printer name, and then click Utilities.
●Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click the folder of your printer.
2. In the Scan section, select Manage Scan to Computer.
3. Click Enable.
To enable the scan to a computer feature (OS X)
The scan to a computer feature is enabled by default from the factory. Follow these instructions if the
feature has been disabled, and you wish to enable it again.
1. Open HP Utility.
2. Under Scan Settings, click Scan to Computer.
3. Ensure that Enable Scan to Computer is selected.
To scan an original from the printer control panel
1. Load the original print side up into the document feeder, or load the original print side down on the right
front corner of the scanner glass.
2. Touch Scan .
3. Touch a computer that you want to scan to.
4. Choose the type of scan you want.
5. Touch OK.
To scan a document or photo to a file (Windows)
1. Load the original print side up into the document feeder, or load the original print side down on the right
front corner of the scanner glass.
2. Double-click the printer icon on the desktop or do one of the following to open the printer software:
ENWW Scan 23
●Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the
printer name.
●Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then
select the printer name.
●Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click the folder for the printer, and then select the icon with the printer's
name.
3. In the printer software, click Scan a Document or Photo .
4. Select the type of scan you want and then click Scan .
●Choose Save as PDF to save the document (or photo) as a PDF file.
●Choose Save as JPEG to save the photo (or document) as an image file.
NOTE: Click the More link at the top right corner of the Scan dialog to review and modify settings for
any scan.
For more information, see Change scan settings (Windows) on page 25.
If Show Viewer After Scan is selected, you can make adjustments to the scanned image in the preview
screen.
To scan an original from HP printer software (OS X)
1. Open HP Scan.
HP Scan is located in the Applications/Hewlett-Packard folder at the top level of the hard disk.
2. Choose the type of scan profile you want and follow the on-screen instructions.
Go online to learn more about using the HP Scan software. Learn how to:
●customize scan settings, such as image file type, scan resolution, and contrast levels.
●scan to network folders and cloud drives.
●preview and adjust images before scanning.
Scan using Webscan
Webscan is a feature of the embedded web server that lets you scan photos and documents from your printer
to your computer using a web browser.
This feature is available even if you did not install the printer software on your computer.
NOTE: By default, Webscan is off. You can enable this feature from the EWS.
If you are unable to open Webscan in the EWS, your network administrator might have turned it off. For more
information, contact your network administrator or the person who set up your network.
To enable Webscan
1. Open the embedded web server. For more information, see Open the embedded Web server
on page 61.
2. Click the Settings tab.
3. In the Security section, click Administrator Settings.
24 Chapter 4 Copy and scan ENWW
4. Select Webscan to enable Webscan.
5. Click Apply and then click OK .
To scan using Webscan
Webscan offers basic scan options. For additional scan options or functionality, scan from the HP printer
software.
1. Load the original print side up into the document feeder, or load the original print side down on the right
front corner of the scanner glass.
2. Open the embedded web server. For more information, see Open the embedded Web server
on page 61.
3. Click the Scan tab.
4. Click Webscan in the left pane, change any settings, and then click Start Scan .
Change scan settings (Windows)
You can modify any of the scan settings either for a singular use or save the changes to use permanently.
These settings include options such as page size and orientation, scan resolution, contrast, and the folder
location for saved scans.
1. Load the original print side up into the document feeder, or load the original print side down on the right
front corner of the scanner glass.
2. Double-click the printer icon on the desktop or do one of the following to open the printer software:
●Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the
printer name.
●Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then
select the printer name.
●Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click the folder for the printer, and then select the icon with the printer's
name.
3. In the printer software, click Scan a Document or Photo .
4. Click the More link in the top right corner of the HP Scan dialog.
The detailed settings pane appears on the right. The left column summarizes the current settings for
each section. The right column allows you to change the settings in the highlighted section.
5. Click each section at the left of the detailed settings pane to review the settings in that section.
You can review and change most settings using drop-down menus.
Some settings allow greater flexibility by displaying a new pane. These are indicated by a + (plus sign)
at the right of the setting. You must either accept or cancel any changes on this pane to return to the
detailed settings pane.
6. When you have finished changing settings, do one of the following.
●Click Scan . You are prompted to save or reject the changes to the shortcut after the scan is
finished.
●Click the save icon to the right of the shortcut, and then click Scan .
ENWW Scan 25
Go online to learn more about using the HP Scan software. Learn how to:
●customize scan settings, such as image file type, scan resolution, and contrast levels.
●scan to network folders and cloud drives.
●preview and adjust images before scanning.
Create a new scan shortcut (Windows)
You can create your own scan shortcut to make scanning easier. For example, you might want to regularly
scan and save photos in PNG format, rather than JPEG.
1. Load the original print side up into the document feeder, or load the original print side down on the right
front corner of the scanner glass.
2. Double-click the printer icon on the desktop or do one of the following to open the printer software:
●Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the
printer name.
●Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then
select the printer name.
●Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click the folder for the printer, and then select the icon with the printer's
name.
3. In the printer software, click Scan a Document or Photo .
4. Click Create New Scan Shortcut .
5. Enter a descriptive name, choose an existing shortcut on which to base your new shortcut, and then
click Create .
For example, if you are creating a new shortcut for photos, choose either Save as JPEG or Email as
JPEG . This makes available the options for working with graphics when scanning.
6. Change the settings for your new shortcut to meet your needs, and then click the save icon to the right
of the shortcut.
NOTE: Click the More link at the top right corner of the Scan dialog to review and modify settings for
any scan.
For more information, see Change scan settings (Windows) on page 25.
Tips for copy and scan success
Use the following tips to copy and scan successfully:
●Keep the glass and the back of the lid clean. The scanner interprets anything it detects on the glass as
part of the image.
●Load your original, print side down, on the right front corner of the glass.
●To make a large copy of a small original, scan the original into the computer, resize the image in the
scanning software, and then print a copy of the enlarged image.
●If you want to adjust scan size, output type, scan resolution, or file type, and so on, start scan from the
printer software.
26 Chapter 4 Copy and scan ENWW
●To avoid incorrect or missing scanned text, make sure the brightness is set appropriately in the
software.
●If you want to scan a document with several pages into one file instead of multiple files, start the scan
with the printer software instead of selecting Scan from the printer display.
ENWW Tips for copy and scan success 27
5Fax
You can use the printer to send and receive faxes, including color faxes. You can schedule faxes to be sent at
a later time and set up phone book contacts to send faxes quickly and easily to frequently used numbers.
From the printer control panel, you can also set a number of fax options, such as resolution and the contrast
between lightness and darkness on the faxes you send.
NOTE: Before you begin faxing, make sure you have set up the printer correctly for faxing. You can verify
the fax is set up correctly by running the fax setup test from the printer control panel.
Learn more about fax setup and test, click here to go online for more information.
●Send a fax
●Receive a fax
●Set up phone book contacts
●Change fax settings
●Fax and digital phone services
●Fax on Voice over Internet Protocol
●Use reports
Send a fax
You can send a fax in a variety of ways, depending on your situation or need.
●Send a standard fax
●Send a standard fax from the computer
●Send a fax from a phone
●Send a fax using monitor dialing
●Send a fax from memory
●Send a fax to multiple recipients
●Send a fax in Error Correction Mode
Send a standard fax
You can easily send a single- or multiple-page black-and-white or color fax by using the printer control panel.
NOTE: If you need printed confirmation that your faxes were successfully sent, fax confirmation must be
enabled.
To send a standard fax from the printer control panel
1. Load the original print side up into the document feeder, or load the original print side down on the right
front corner of the scanner glass.
2. From the printer control panel display, touch Fax .
28 Chapter 5 Fax ENWW
3. Touch Send Now.
4. Touch Enter Fax Number or touch ( Phone Book ).
5. Enter the fax number using the screen keypad that appears or select a phone book contact or previously
dialed or received number.
TIP: To add a pause in the fax number you are entering, touch * repeatedly, until a dash (-) appears on
the display.
6. Touch Black or Color .
TIP: If the recipient reports issues with the quality of the fax, try changing the resolution or contrast
of your fax.
Send a standard fax from the computer
You can fax a document directly from your computer without printing it first.
To use this feature, make sure you have installed the HP printer software on your computer, the printer is
connected to a working telephone line, and the fax function is set up and functioning correctly.
To send a standard fax from the computer (Windows)
1. Open the document on your computer that you want to fax.
2. On the File menu in your software application, click Print.
3. From the Name list, select the printer that has “fax” in the name.
4. To change settings (such as selecting to send the document as a black fax or a color fax), click the
button that opens the Properties dialog box. Depending on your software application, this button might
be called Properties, Options, Printer Setup, Printer, or Preferences.
5. After you have changed any settings, click OK.
6. Click Print or OK.
7. Enter the fax number and other information for the recipient, change any further settings for the fax,
and then click Send Fax. The printer begins dialing the fax number and faxing the document.
To send a standard fax from the computer (OS X)
1. Open the document on your computer that you want to fax.
2. From the File menu in your software, click Print.
3. Select the printer that has “(Fax)” in the name.
4. Enter a fax number or a name from your Contacts that already has a fax number entry.
5. When you have finished filling out the fax information, click Fax.
Send a fax from a phone
You can send a fax using your telephone extension. This allows you to talk with the intended recipient before
sending the fax.
ENWW Send a fax 29
To send a fax from an extension phone
1. Load the original print side up into the document feeder, or load the original print side down on the right
front corner of the scanner glass.
2. Dial the number by using the keypad on the phone that is connected to the printer.
If the recipient answers the telephone, inform the recipient that they should receive the fax on their fax
machine after they hear fax tones. If a fax machine answers the call, you will hear fax tones from the
receiving fax machine.
3. From the printer control panel display, touch Fax .
4. Touch Send Fax .
5. When you are ready to send the fax, touch Black or Color .
The telephone is silent while the fax is transmitting. If you want to speak to the recipient after, remain
on the line until the transmission is complete. If you were finished talking to the recipient, you can hang
up the telephone as soon as the fax begins transmitting.
Send a fax using monitor dialing
When you send a fax using monitor dialing, you can hear the dial tones, telephone prompts, or other sounds
through the speakers on the printer. This enables you to respond to prompts while dialing, as well as control
the pace of your dialing.
TIP: If you are using a calling card and do not enter your PIN fast enough, the printer might start sending
fax tones too soon and cause your PIN not to be recognized by the calling card service. If this is the case, you
can create a phone book contact to store the PIN for your calling card. For more information, see Set up
phone book contacts on page 36.
NOTE: Make sure the volume is turned on to hear a dial tone.
To send a fax using monitor dialing from the printer control panel
1. Load the original print side up into the document feeder, or load the original print side down on the right
front corner of the scanner glass.
2. From the printer control panel display, touch Fax .
3. Touch Send Now.
4. Touch Black or Color .
5. Touch Enter Fax Number or touch ( Phone Book ).
6. Enter the fax number using the screen keypad that appears or select a phone book contact or previously
dialed or received number.
TIP: To add a pause in the fax number you are entering, touch * repeatedly, until a dash (-) appears on
the display.
7. Follow any prompts that might occur.
TIP: If you are using a calling card to send a fax and you have your calling card PIN stored as a phone
book contact, when prompted to enter your PIN, touch ( Phone Book ) to select the phone book
contact where you have your PIN stored.
Your fax is sent when the receiving fax machine answers.
30 Chapter 5 Fax ENWW
Send a fax from memory
You can scan a black-and-white fax into memory and then send the fax from memory. This feature is useful if
the fax number you are trying to reach is busy or temporarily unavailable. The printer scans the originals into
memory and sends them once it is able to connect to the receiving fax machine. After the printer scans the
pages into memory, you can immediately remove the originals from the document feeder tray or scanner
glass.
NOTE: You can only send a black-and-white fax from memory.
To send a fax from memory
1. Ensure that Scan and Fax Method is turned on.
a. From the printer control panel display, touch Fax .
b. Touch Setup , and then touch Preferences .
c. Set Scan and Fax Method to on.
2. Load the original print side up into the document feeder, or load the original print side down on the right
front corner of the scanner glass.
3. From the printer control panel display, touch Fax .
4. Touch Send Now.
5. Touch Enter Fax Number or touch ( Phone Book ).
6. Enter the fax number using the screen keypad that appears or select a phone book contact or previously
dialed or received number.
TIP: To add a pause in the fax number you are entering, touch * repeatedly, until a dash (-) appears on
the display.
7. Touch Black .
The printer sends the fax when the receiving fax machine is available.
Send a fax to multiple recipients
You can send a fax to multiple recipients by creating a group phone book contact made up of two or more
individual recipients.
To send a fax to multiple recipients using group phone book
1. Load the original print side up into the document feeder, or load the original print side down on the right
front corner of the scanner glass.
2. From the printer control panel display, touch Fax .
3. Touch Send Now.
4. Touch ( Phone Book ).
5. Touch Group Contacts.
6. Touch the name of the group phone book contact.
7. Touch Send Fax .
ENWW Send a fax 31
TIP: If the recipient reports issues with the quality of the fax, try changing the resolution or contrast
of your fax.
Send a fax in Error Correction Mode
Error Correction Mode (ECM) prevents loss of data due to poor phone lines by detecting errors that occur
during transmission and automatically requesting retransmission of the erroneous portion. Phone charges
are unaffected, or might even be reduced, on good phone lines. On poor phone lines, ECM increases sending
time and phone charges, but sends the data much more reliably. The default setting is On . Turn ECM off only
if it increases phone charges substantially, and if you can accept poorer quality in exchange for reduced
charges.
If you turn ECM off:
●The quality and transmission speed of faxes you send and receive are affected.
●The Fax Speed is automatically set to Medium .
●You can no longer send or receive faxes in color.
To change the ECM setting from the control panel
1. From the printer control panel display, touch Fax .
2. Touch Setup .
3. Touch Preferences .
4. Scroll to Error Correction Mode and touch to turn the feature on or off.
Receive a fax
You can receive faxes automatically or manually. If you turn off the Auto Answer option, you must receive
faxes manually. If you turn on the Auto Answer option (the default setting), the printer automatically
answers incoming calls and receives faxes after the number of rings that are specified by the Rings to
Answer setting. (The default Rings to Answer setting is five rings.)
If you receive a Legal-size or larger fax and the printer is not currently set to use Legal-size paper, the printer
reduces the fax so that it fits on the paper that is loaded. If you have disabled the Auto Reduction feature,
the printer prints the fax on two pages.
NOTE: If you are copying a document when a fax arrives, the fax is stored in the printer memory until the
copying finishes.
●Receive a fax manually
●Set up backup fax
●Reprint received faxes from memory
●Forward faxes to another number
●Set automatic reduction for incoming faxes
●Block unwanted fax numbers
Receive a fax manually
When you are on the phone, the person you are speaking with can send you a fax while you are still
connected. You can pick up the handset to talk or listen for fax tones.
32 Chapter 5 Fax ENWW
You can receive faxes manually from a phone that is directly connected to the printer (on the 2-EXT port).
To receive a fax manually
1. Make sure the printer is turned on and you have paper loaded in the main tray.
2. Remove any originals from the document feeder tray.
3. Set the Rings to Answer setting to a high number to allow you to answer the incoming call before the
printer answers. Or, turn off the Auto Answer setting so that the printer does not automatically answer
incoming calls.
4. If you are currently on the phone with the sender, instruct the sender to press Start on their fax
machine.
5. When you hear fax tones from a sending fax machine, do the following:
a. From the printer control panel display, touch Fax , touch Send and Receive, and then touch
Receive Now.
b. After the printer begins to receive the fax, you can hang up the phone or remain on the line. The
phone line is silent during fax transmission.
Set up backup fax
Depending on your preference and security requirements, you can set up the printer to store all the faxes it
receives, only the faxes it receives while the printer is in an error condition, or none of the faxes it receives.
To set backup fax from the printer control panel
1. From the printer control panel display, touch Fax .
2. Touch Setup .
3. Touch Preferences .
4. Touch Backup Fax Reception.
5. Touch the required setting.
On The default setting. When Backup fax is On , the printer stores all received faxes in memory. This
enables you to reprint up to 30 of the most recently printed faxes if they are still saved in
memory.
NOTE: When printer memory is low, it overwrites the oldest, printed faxes as it receives new
faxes. If the memory becomes full of unprinted faxes, the printer stops answering incoming fax
calls.
NOTE: If you receive a fax that is too large, such as a very detailed color photo, it might not be
stored in memory due to memory limitations.
On Error Only Causes the printer to store faxes in memory only if an error condition exists that prevents the
printer from printing the faxes (for example, if the printer runs out of paper). The printer
continues to store incoming faxes as long as there is memory available. (If the memory becomes
full, the printer stops answering incoming fax calls.) When the error condition is resolved, the
faxes stored in memory print automatically, and then they are deleted from memory.
Off Faxes are never stored in memory. For example, you might want to turn off Backup fax for
security purposes. If an error condition occurs that prevents the printer from printing (for
example, the printer runs out of paper), the printer stops answering incoming fax calls.
ENWW Receive a fax 33
Reprint received faxes from memory
The received faxes that are not printed out are stored in memory.
NOTE: After the memory becomes full, the printer cannot receive the new fax until you print or delete the
faxes from memory. You might also want to delete the faxes in memory for security or privacy purposes.
Depending on the sizes of the faxes in memory, you can reprint up to 30 of the most recently printed faxes, if
they are still in memory. For example, you might need to reprint your faxes if you lost the copy of your last
printout.
To reprint faxes in memory from the printer control panel
1. Load paper in the main paper tray.
2. From the printer control panel display, touch Fax .
3. Touch Reprint.
4. Select the faxes you want to reprint.
5. Touch Print.
Forward faxes to another number
You can set up the printer to forward your faxes to another fax number. All faxes are forwarded in black and
white, regardless of how they were originally sent.
HP recommends that you verify the number you are forwarding to is a working fax line. Send a test fax to
make sure the fax machine is able to receive your forwarded faxes.
To forward faxes from the printer control panel
1. From the printer control panel display, touch Fax .
2. Touch Setup .
3. Touch Preferences .
4. Touch Fax Forwarding.
5. Touch On (Print and Forward) to print and forward the fax, or select On (Forward) to forward the fax.
NOTE: If the printer is not able to forward the fax to the designated fax machine (for example, if it is
not turned on), the printer prints the fax. If you set up the printer to print error reports for received
faxes, it also prints an error report.
6. At the prompt, enter the number of the fax machine intended to receive the forwarded faxes, and then
touch Done . Enter the required information for each of the following prompts: start date, start time,
end date, and end time.
7. Fax forwarding is activated. Touch OK to confirm.
If the printer loses power when fax forwarding is set up, it saves the fax forwarding setting and phone
number. When the power is restored to the printer, the fax forwarding setting is still On .
NOTE: You can cancel fax forwarding by selecting Off from the Fax Forwarding menu.
34 Chapter 5 Fax ENWW
Set automatic reduction for incoming faxes
The Auto Reduction setting determines what the printer does if it receives a fax that is too large for the
loaded paper size. This setting is turned on by default, so the image of the incoming fax is reduced to fit on
one page, if possible. If this feature is turned off, information that does not fit on the first page is printed on
a second page. Auto Reduction is useful when you receive a Legal-size fax and Letter-size paper is loaded in
the main tray.
To set automatic reduction from the printer control panel
1. From the printer control panel display, touch Fax .
2. Touch Setup .
3. Touch Preferences .
4. Touch Auto Reduction to turn on or off.
NOTE: Turning off automatic reduction also turns off 2-sided fax printing.
Block unwanted fax numbers
If you subscribe to a caller ID service through your phone provider, you can block specific fax numbers so the
printer does not receive faxes received from those numbers. When an incoming fax call is received, the
printer compares the number to the list of junk fax numbers to determine if the call should be blocked. If the
number matches a number in the blocked fax numbers list, the fax is not received. (The maximum number of
fax numbers you can block varies by model.)
NOTE: This feature is not supported in all countries/regions. If it is not supported in your country/region,
Junk Fax Blocking does not appear in the Preferences menu.
NOTE: If no phone numbers are added in the Caller ID list, it is assumed that you are not subscribed to a
Caller ID service.
You can block specific fax numbers by adding them to the junk fax list, unblock these numbers by removing
them from the junk fax list, and print a list of blocked junk fax numbers.
To add a number to the junk fax list
1. From the printer control panel display, touch Fax .
2. Touch Setup .
3. Touch Preferences .
4. Touch Junk Fax Blocking .
5. Touch + (Plus Sign).
6. Do one of the following.
●To select a fax number to block from the call history list, touch (Received Call History).
●Manually enter a fax number to block, and touch Add.
NOTE: Make sure you enter the fax number as it appears on the control panel display, and not the fax
number that appears on the fax header of the received fax, as these numbers can be different.
ENWW Receive a fax 35
To remove numbers from the junk fax list
If you no longer want to block a fax number, you can remove it from the junk fax list.
1. From the printer control panel display, touch Fax .
2. Touch Setup .
3. Touch Preferences .
4. Touch Junk Fax Blocking .
5. Select the number you want to remove, and then touch Remove.
Set up phone book contacts
You can set up frequently used fax numbers as phone book contacts. This lets you quickly dial those numbers
using the printer control panel.
TIP: In addition to creating and managing phone book contacts from the printer control panel, you can also
use tools available on your computer, such as the HP software included with the printer and the printer EWS.
For more information, see Advanced printer management tools (for networked printers) on page 60.
●Set up and change phone book contacts
●Set up and change group phone book contacts
●Delete phone book contacts
Set up and change phone book contacts
You can store fax numbers as phone book contacts.
To set up phone book contacts
1. From the printer control panel display, touch Fax .
2. Touch Send Now.
3. Touch ( Phone Book ).
4. Touch (Contacts).
5. Touch (Plus Sign) to add a contact.
6. Touch Name and then type the name of the phone book contact, and then touch Done .
7. Touch Number and type the fax number for the phone book contact, and then touch Done .
NOTE: Be sure to include any pauses or other required numbers, such as an area code, an access code
for numbers outside a PBX system (usually a 9 or 0), or a long-distance prefix.
8. Touch Add.
To change phone book contacts
1. From the printer control panel display, touch Fax .
2. Touch Send Now.
3. Touch ( Phone Book ).
36 Chapter 5 Fax ENWW
4. Touch Contacts.
5. Touch (Edit) to edit a contact.
6. Touch the phone book contact that you want to edit.
7. Touch Name and then edit the name of the Phone Book contact, and then touch Done .
8. Touch Number and edit the fax number for the phone book contact, and then touch OK.
NOTE: Be sure to include any pauses or other required numbers, such as an area code, an access code
for numbers outside a PBX system (usually a 9 or 0), or a long-distance prefix.
9. Touch Done .
Set up and change group phone book contacts
You can store groups of fax numbers as group phone book contacts.
To set up group phone book contacts
NOTE: Before you can create a group phone book contact, you must have already created at least one
phone book contact.
1. From the printer control panel display, touch Fax .
2. Touch Send Now.
3. Touch ( Phone Book ).
4. Touch Group Contacts.
5. Touch (Plus Sign) to add a group.
6. Touch Name and then type the name of the group, and then touch Done .
7. Touch Number, select the phone book contacts you want to include in this group, and then touch Select.
8. Touch Create.
To change group phone book contacts
1. From the printer control panel display, touch Fax .
2. Touch Send Now.
3. Touch ( Phone Book ).
4. Touch Group Contacts.
5. Touch (Edit) to edit a group.
6. Touch the group phone book contact that you want to edit.
7. Touch Name and then edit the name of the group phone book contact, and then touch Done .
8. Touch Number .
9. Deselect the phone book contacts you want to delete from this group, or touch (Plus Sign) to add a
contact to the group.
10. Touch Done .
ENWW Set up phone book contacts 37
Delete phone book contacts
You can delete phone book contacts or group phone book contacts.
1. From the printer control panel display, touch Fax .
2. Touch Send Now.
3. Touch ( Phone Book ).
4. Touch Contacts or Group Contacts.
5. Touch (Edit).
6. Touch the name of the phone book contact or group contact you want to delete.
7. Touch Delete.
8. Touch Yes to confirm.
Change fax settings
After completing the steps in the getting started guide that came with the printer, use the following steps to
change the initial settings or to configure other options for faxing.
●Configure the fax header
●Set the answer mode (Auto answer)
●Set the number of rings before answering
●Change the answer ring pattern for distinctive ring
●Set the dial type
●Set the redial options
●Set the fax speed
●Set the fax sound volume
Configure the fax header
The fax header prints your name and fax number on the top of every fax you send. HP recommends that you
set up the fax header by using the HP software provided with the printer. You can also set up the fax header
from the printer control panel, as described here.
NOTE: In some countries/regions, the fax header information is a legal requirement.
To set or change the fax header
1. From the printer control panel display, touch Fax .
2. Touch Setup , and then touch Preferences .
3. Touch Fax Header.
4. Enter your personal or company name, and then touch Done .
5. Enter your fax number, and then touch Done .
38 Chapter 5 Fax ENWW
Set the answer mode (Auto answer)
The answer mode determines whether the printer answers incoming calls.
●Turn on the Auto Answer setting if you want the printer to answer faxes automatically. The printer
answers all incoming calls and faxes.
●Turn off the Auto Answer setting if you want to receive faxes manually. You must be available to
respond in person to the incoming fax call or else the printer does not receive faxes.
To set the answer mode
1. From the printer control panel display, touch Fax .
2. Touch Setup , and then touch Preferences .
3. Touch Auto Answer to turn it on or off.
You may also access this feature by touching (the Fax Status icon) on the Home screen.
Set the number of rings before answering
If you turn on the Auto Answer setting, you can specify how many rings occur before incoming calls are
automatically answered.
The Rings to Answer setting is important if you have an answering machine on the same phone line as the
printer, because you want the answering machine to answer the phone before the printer does. The number
of rings to answer for the printer should be greater than the number of rings to answer for the answering
machine.
For example, set your answering machine to a low number of rings and the printer to answer in the maximum
number of rings. (The maximum number of rings varies by country/region.) In this setup, the answering
machine answers the call and the printer monitors the line. If the printer detects fax tones, it receives the fax.
If the call is a voice call, the answering machine records the incoming message.
To set the number of rings before answering
1. From the printer control panel display, touch Fax .
2. Touch Setup , and then touch Preferences .
3. Touch Rings to Answer .
4. Touch the number of rings.
5. Touch Done to accept the setting.
Change the answer ring pattern for distinctive ring
Many phone companies offer a distinctive ring feature that allows you to have several phone numbers on one
phone line. When you subscribe to this service, each number is assigned a different ring pattern. You can set
up the printer to answer incoming calls that have a specific ring pattern.
If you connect the printer to a line with distinctive ring, have your telephone company assign one ring pattern
to voice calls and another ring pattern to fax calls. HP recommends that you request double or triple rings for
a fax number. When the printer detects the specified ring pattern, it answers the call and receives the fax.
TIP: You can also use the Ring Pattern Detection feature in the printer control panel to set distinctive ring.
With this feature, the printer recognizes and records the ring pattern of an incoming call and, based on this
call, automatically determines the distinctive ring pattern assigned by your telephone company to fax calls.
ENWW Change fax settings 39
If you do not have a distinctive ring service, use the default ring pattern, which is All Rings .
NOTE: The printer cannot receive faxes when the main phone number is off the hook.
To change the answer ring pattern for distinctive ring
1. Verify that the printer is set to answer fax calls automatically.
2. From the printer control panel display, touch Fax .
3. Touch Setup , and then select Preferences .
4. Touch Distinctive Ring .
A message appears stating that this setting should not be changed unless you have multiple numbers
on the same telephone line. Touch Yes to continue.
5. Do one of the following:
●Touch the ring pattern assigned by your telephone company to fax calls.
●Touch Ring Pattern Detection, and then follow the instructions on the printer control panel.
NOTE: If the Ring Pattern Detection feature cannot detect the ring pattern or if you cancel the feature
before it finishes, the ring pattern is automatically set to the default, which is All Rings .
NOTE: If you are using a PBX phone system that has different ring patterns for internal and external
calls, you must call the fax number from an external number.
Set the dial type
Use this procedure to set tone-dialing or pulse-dialing mode. The factory-set default is Tone. Do not change
the setting unless you know that your phone line cannot use tone dialing.
NOTE: The pulse-dialing option is not available in all countries/regions.
To set the dial type
1. From the printer control panel display, touch Fax .
2. Touch Setup , and then touch Preferences .
3. Touch Dial Type.
4. Touch to select Tone or Pulse.
Set the redial options
If the printer was unable to send a fax because the receiving fax machine did not answer or was busy, the
printer attempts to redial based on the settings for the redial options. Use the following procedure to turn
the options on or off.
●Busy redial: If this option is turned on, the printer redials automatically if it receives a busy signal. The
default is On .
●No answer redial: If this option is turned on, the printer redials automatically if the receiving fax
machine does not answer. The default is Off .
●Connection problem redial: If this option is turned on, the printer redials automatically if there has
been a problem connecting with the receiving fax machine. Connection problem redial works only for
sending faxes from memory. The default is On .
40 Chapter 5 Fax ENWW
To set the redial options
1. From the printer control panel display, touch Fax .
2. Touch Setup , and then touch Preferences .
3. Touch Auto Redial .
4. Touch Busy Redial , or No Answer Redial , or Connection Problem Redial .
Set the fax speed
You can set the fax speed used to communicate between your printer and other fax machines when sending
and receiving faxes.
If you use one of the following, setting the fax speed to a slower speed might be required:
●An Internet phone service
●A PBX (private branch exchange) system
●Fax on Voice over Internet Protocol (VoIP)
●An integrated services digital network (ISDN) service
If you experience problems sending and receiving faxes, try using a slower Fax Speed . The following table
provides the available fax speed settings.
Fax speed setting Fax speed
Fast v.34 (33600 baud)
Medium v.17 (14400 baud)
Slow v.29 (9600 baud)
To set the fax speed
1. From the printer control panel display, touch Fax .
2. Touch Setup , and then touch Preferences .
3. Touch Fax Speed .
4. Touch to select an option.
Set the fax sound volume
You can change the volume of fax sounds.
To set the fax sound volume
1. From the printer control panel display, touch Fax .
2. Touch Setup , and then touch Preferences .
3. Touch Volume.
4. Touch to select Soft, Loud, or Off .
ENWW Change fax settings 41
Fax and digital phone services
Many telephone companies provide their customers with digital phone services, such as the following:
●DSL: A Digital subscriber line (DSL) service through your telephone company. (DSL might be called ADSL
in your country/region.)
●PBX: A private branch exchange (PBX) phone system.
●ISDN: An integrated services digital network (ISDN) system.
●VoIP: A low-cost phone service that allows you to send and receive faxes with your printer by using the
Internet. This method is called Fax on Voice over Internet Protocol (VoIP).
For more information, see Fax on Voice over Internet Protocol on page 42.
HP printers are designed specifically for use with traditional analog phone services. If you are in a digital
phone environment (such as DSL/ADSL, PBX, or ISDN), you might need to use digital-to-analog filters or
converters when setting up the printer for faxing.
NOTE: HP does not guarantee that the printer will be compatible with all digital service lines or providers, in
all digital environments, or with all digital-to-analog converters. It is always recommended that you discuss
with the telephone company directly for the correct setup options based on their line services provided.
Fax on Voice over Internet Protocol
You might be able to subscribe to a low cost phone service that allows you to send and receive faxes with
your printer by using the Internet. This method is called Fax on Voice over Internet Protocol (VoIP).
The following are indications you probably use a VoIP service.
●Dial a special access code along with the fax number.
●Have an IP converter box that connects to the Internet and provides analog phone ports for the fax
connection.
NOTE: You can only send and receive faxes by connecting a phone cord to the port labeled "1-LINE" on the
printer. This means that your connection to the Internet must be done either through a converter box (which
supplies regular analog phone jacks for fax connections) or your telephone company.
TIP: Support for traditional fax transmission over any Internet protocol telephone systems are often
limited. If you experience problems faxing, try using a slower fax speed or disabling the fax error-correction
mode (ECM). However, if you turn off ECM, you cannot send and receive color faxes.
For more information about changing the fax speed, see Set the fax speed on page 41. For more information
about using ECM, see Send a fax in Error Correction Mode on page 32.
If you have questions about Internet faxing, contact your Internet faxing services support department or your
local service provider for further assistance.
Use reports
You can set up the printer to print error reports and confirmation reports automatically for each fax you send
and receive. You can also manually print system reports as required; these reports provide useful system
information about the printer.
By default, the printer is set to print a report only if there is a problem sending or receiving a fax.
A confirmation message that indicates whether a fax was successfully sent appears briefly on the control
panel display after each transaction.
42 Chapter 5 Fax ENWW
NOTE: If the reports are not legible, you can check the estimated ink levels from the control panel or the HP
software. For more information, see Check the estimated ink levels on page 50.
NOTE: Ink level alerts and indicators provide estimates for planning purposes only. When you receive
a low-ink alert, consider having a replacement cartridge available to avoid possible printing delays. You do
not need to replace the ink cartridges until the print quality becomes unacceptable.
NOTE: Ensure that the printheads and ink cartridges are in good conditions and installed properly. For more
information, see Work with cartridges on page 50.
This section contains the following topics:
●Print fax confirmation reports
●Print fax error reports
●Print and view the fax log
●Clear the fax log
●Print the details of the last fax transaction
●Print a Caller ID Report
●View the Call History
Print fax confirmation reports
You can print a confirmation report either when a fax is sent, or when any fax is sent or received. The default
setting is On (Fax Send). When turned off, a confirmation message appears briefly on the control panel after
each fax is sent or received.
NOTE: You can include an image of the first page of the fax on the Fax Sent Confirmation report if you
select On (Fax Send) or On (Fax Send and Fax Receive) , and if you scan the fax to send from memory or use
the Scan and Fax option.
To enable fax confirmation
1. From the printer control panel display, touch Setup .
2. Touch Setup .
3. Touch Reports and touch Fax Confirmation .
4. Touch to select one of the following options.
Off Does not print a fax confirmation report when you send and receive faxes successfully. This is the
default setting.
On (Fax Send) Prints a fax confirmation report for every fax you send.
On (Fax Receive) Prints a fax confirmation report for every fax you receive.
On (Fax Send and Fax
Receive)
Prints a fax confirmation report for every fax you send and receive.
To include an image of the fax on the report
1. From the printer control panel display, touch Fax .
2. Touch Setup .
3. Touch Reports and touch Fax Confirmation .
ENWW Use reports 43
4. Touch On (Fax Send) or On (Fax Send and Fax Receive) .
5. Touch Confirmation with image.
6. Touch OK.
Print fax error reports
You can configure the printer so that it automatically prints a report when there is an error during
transmission or reception.
To set the printer to print fax error reports automatically
1. From the printer control panel display, touch Fax .
2. Touch Setup .
3. Touch Reports and touch Fax Error Report.
4. Touch to select one of the following.
On (Fax Send and Fax
Receive)
Prints whenever a fax error occurs.
Off Does not print any fax error reports.
On (Fax Send) Prints whenever a transmission error occurs. This is the default setting.
On (Fax Receive) Prints whenever a receiving error occurs.
Print and view the fax log
You can print a log of faxes that have been received and sent by the printer.
To print the fax log from the printer control panel
1. From the printer control panel display, touch Fax .
2. Touch Setup , and then touch Reports .
3. Touch Print Fax Reports .
4. Touch Last 30 Transactions Fax Logs .
5. Touch Print to begin printing.
Clear the fax log
Clearing the fax log also deletes all faxes stored in memory.
To clear the fax log
1. From the printer control panel display, touch Fax .
2. Touch Setup , and then touch Tools.
3. Touch Clear Fax Logs.
Print the details of the last fax transaction
The Last Fax Transaction report prints the details of the last fax transaction to occur. Details include the fax
number, number of pages, and the fax status.
44 Chapter 5 Fax ENWW
To print the Last Fax Transaction report
1. From the printer control panel display, touch Fax .
2. Touch Setup , and then touch Reports .
3. Touch Print Fax Reports .
4. Select Last Transaction and touch Print.
Print a Caller ID Report
You can print a list of Caller ID fax numbers.
To print a Caller ID History Report
1. From the printer control panel display, touch Fax .
2. Touch Setup , and then touch Reports .
3. Touch Print Fax Reports .
4. Touch Caller ID Report.
5. Touch Print to begin printing.
View the Call History
You can view a list of all the calls placed from the printer.
NOTE: You cannot print the call history.
To view the call history
1. From the printer control panel display, touch Fax .
2. Touch Send Now.
3. Touch ( Phone Book ).
4. Touch Call History .
ENWW Use reports 45
6Use Web Services
●What are Web Services?
●Set up Web Services
●Print with HP ePrint
●Use HP Printables
●Use the HP Connected website
●Remove Web Services
●Tips for using Web Services
What are Web Services?
ePrint
●HP ePrint is a free service from HP that allows you to print to your HP ePrint-enabled printer anytime,
from any location. It's as simple as sending an email to the email address assigned to your printer when
you enable Web Services on the printer. No special drivers or software are needed. If you can send an
email, you can print from anywhere, using ePrint .
Once you have signed up for an account on HP Connected ( www.hpconnected.com ), you can sign in to
view your ePrint job status, manage your ePrint printer queue, control who can use your printer's
ePrint email address to print, and get help for ePrint .
HP Printables
●HP Printables allow you to easily locate and print preformatted web content, directly from your printer.
You can also scan and store your documents digitally on the Web.
HP Printables provide a wide range of content, from store coupons to family activities, news, travel,
sports, cooking, photos, and many more. You can even view and print your online images from popular
photo sites.
Certain HP Printables also allow you to schedule the delivery of app content to your printer.
Preformatted content designed specifically for your printer means no cut-off text and pictures and no
extra pages with only one line of text. On some printers, you can also choose paper and print quality
settings on the print preview screen.
Set up Web Services
Before you set up Web Services, make sure your printer is connected to the Internet using wireless
connection.
To set up Web Services, use one of the following methods.
46 Chapter 6 Use Web Services ENWW
To set up Web Services using the printer control panel
1. From the printer control panel display, touch HP Printables.
2. Touch Enable Web Services.
3. Touch Accept to accept the Web Services terms of use and enable Web Services.
4. In the Auto Update screen, touch Yes to allow the printer to automatically check for and install product
updates.
NOTE: If a printer update is available, the printer downloads and installs the update, and then
restarts. You have to repeat the instructions from step 1 to set up Web Services.
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the on-screen
instructions to set up a proxy server. If you do not have the proxy details, contact your network
administrator or the person who set up the network.
5. When the printer is connected to the server, the printer prints an information page. Follow the
instructions on the information page to finish the setup.
To set up Web Services using the Embedded Web Server (EWS)
1. Open the EWS. For more information, see Open the embedded Web server on page 61.
2. Click the Web Services tab.
3. In the Web Services Settings section, click Setup , click Continue, and follow the on-screen instructions
to accept the terms of use.
4. If prompted, choose to allow the printer to check for and install printer updates.
NOTE: If a printer update is available, the printer downloads and installs the update, and then
restarts. Repeat the instructions from step 1 to set up Web Services.
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the on-screen
instructions to set up a proxy server. If you do not have the proxy details, contact your network
administrator or the person who set up the network.
5. When the printer is connected to the server, the printer prints an information page. Follow the
instructions on the information page to finish the setup.
To set up Web Services using the HP printer software (Windows)
1. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 11.
2. In the window that appears, double-click Print, Scan & Fax and then select Connect Printer to the Web
under Print. The printer's home page (embedded web server) opens.
3. Click the Web Services tab.
4. In the Web Services Settings section, click Setup , click Continue, and follow the on-screen instructions
to accept the terms of use.
5. If prompted, choose to allow the printer to check for and install printer updates.
NOTE: If a printer update is available, the printer will download and install the update, and then
restart. You will have to repeat the instructions from step 1 to set up Web Services.
ENWW Set up Web Services 47
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the on-screen
instructions to set up a proxy server. If you do not have the details, contact your network administrator
or the person who set up the network.
6. When the printer is connected to the server, the printer prints an information page. Follow the
instructions on the information page to finish the setup.
Print with HP ePrint
HP ePrint is a free service from HP that allows you to print to your HP ePrint-enabled printer anywhere you
can send an email. Just send your documents and photos to the email address assigned to your printer when
you enable Web Services. No additional drivers or software are needed.
●Your printer needs to have a wireless network connection to the Internet. You will not be able to use HP
ePrint via a USB connection to a computer.
●Attachments might print differently from the way they appear in the software program that created
them, depending on the original fonts and layout options used.
●Free product updates are provided with HP ePrint. Some updates might be required to enable certain
functionality.
Once you have signed up for an account on HP Connected (www.hpconnected.com), you can sign in to view
your ePrint job status, manage your ePrint printer queue, control who can use your printer’s ePrint email
address to print, and get help for ePrint.
Before you can use ePrint, make sure that:
●The printer is connected to an active network providing Internet access.
●Web Services is turned on. If not, you will be prompted to turn it on.
To ePrint a document from anywhere
1. Enable Web Services.
a. From the Home screen, touch the ( ePrint ) icon.
b. Accept the Terms of Use, and then follow the onscreen instructions to enable Web Services.
c. Print the ePrint information page, and then follow the instructions on the page to sign up for an
ePrint account.
2. Find your ePrint email address.
a. Touch ( ePrint ) on the Home screen.
b. Touch (Web Services Settings).
c. In the Web Services Settings menu, touch Display Email Address.
3. Email your document to the printer for printing.
a. Create a new email and attach the document to print.
b. Send the email to the printer email address.
The printer prints the attached document.
48 Chapter 6 Use Web Services ENWW
NOTE: The ePrint server does not accept email print jobs if there are multiple email addresses
included in the "To" or "Cc" fields. Only enter the HP ePrint email address in the "To" field. Do not enter
any additional email addresses in the other fields.
NOTE: The email is printed once it is received. As with any email, there is no guarantee when or whether it is
received. You can check the print status on HP Connected (www.hpconnected.com).
NOTE: Documents printed with ePrint may appear different from the original. Style, formatting, and text
flow may differ from the original document. For documents that need to be printed with a higher quality
(such as legal documents), we recommend that you print from the software application on your computer,
where you have more control over what your printout looks like.
Click here to go online for more information.
Use HP Printables
Print pages from the web, without using a computer, by setting up HP Printables, a free service from HP. You
can print coloring pages, calendars, puzzles, recipes, maps, and more, depending on the apps available in
your country/region.
Go to the HP Connected website for more information and specific terms and conditions:
www.hpconnected.com .
Use the HP Connected website
Use HP’s free HP Connected website to set up increased security for HP ePrint, and specify the email
addresses that are allowed to send email to your printer. You can also get product updates, more apps, and
other free services.
Go to the HP Connected website for more information and specific terms and conditions:
www.hpconnected.com .
Remove Web Services
To remove Web Services
1. From the printer control panel display, touch ( ePrint ), and then touch (Web Services Settings).
2. Touch Remove Web Services.
3. Touch Yes to confirm.
Tips for using Web Services
Use the following tips to print apps and use HP ePrint.
Tips for printing apps and using HP ePrint
●Learn how to share your photos online and order prints. Click here to go online for more information.
●Learn about apps for printing recipes, coupons, and other content from the web, simply and easily. Click
here to go online for more information.
ENWW Use HP Printables 49
7 Work with cartridges
●Check the estimated ink levels
●Replace the cartridges
●Order ink supplies
●Use single-cartridge mode
●Cartridge warranty information
●Tips for working with cartridges
Check the estimated ink levels
To check the estimated ink levels from the printer control panel
▲From the Home screen, touch the (Ink icon) to display the estimated ink levels.
To check the ink levels from the printer software (Windows)
1. Open the HP printer software.
2. In the printer software, click Estimated Ink Levels.
To check the ink levels from HP Utility
1. Open HP Utility.
HP Utility is located in the Hewlett-Packard folder in the Applications folder at the top level of the hard
disk.
2. Select the HP OfficeJet 4650 series from the list of devices at the left of the window.
3. Click Supplies Status.
The estimated ink levels appear.
4. Click All Settings to return to the Information and Support pane.
NOTE: If you have installed a refilled or remanufactured cartridge, or a cartridge that has been used in
another printer, the ink level indicator might be inaccurate or unavailable.
NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When you receive a
low-ink warning message, consider having a replacement cartridge available to avoid possible printing
delays. You do not have to replace the cartridges until the print quality is unacceptable.
NOTE: Ink from the cartridges is used in the printing process in a number of different ways, including in the
initialization process, which prepares the product and cartridges for printing, and in printhead servicing,
which keeps print nozzles clear and ink flowing smoothly. In addition, some residual ink is left in the cartridge
after it is used. For more information, see www.hp.com/go/inkusage.
50 Chapter 7 Work with cartridges ENWW
Replace the cartridges
To replace the cartridges
1. Check that power is on.
2. Remove the old cartridge.
a. Open the access door.
b. Open the latch on the cartridge slot.
c. Remove the cartridge from the slot.
3. Insert a new cartridge.
a. Remove the cartridge from packaging.
ENWW Replace the cartridges 51
b. Remove plastic tape using the pull tab.
c. Slide the new cartridge in the slot and close the latch until it clicks.
4. Close the cartridge access door.
NOTE: The HP printer software prompts you to align the ink cartridges when you print a document
after installing a new ink cartridge.
Order ink supplies
Before ordering cartridges, locate the correct cartridge number.
Locate the cartridge number on the printer
▲The cartridge number is located inside the cartridge access door.
Locate the cartridge number in the printer software
1. Depending on your operating system, do one of the following to open the printer software:
52 Chapter 7 Work with cartridges ENWW
●Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the
printer name.
●Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then
select the printer name.
●Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click the folder for the printer, and then select the icon with the printer's
name.
2. In the printer software, click Shop, and then click Shop For Supplies Online.
The correct cartridge number appears when you use this link.
To find the print cartridge reorder numbers
1. Open HP Utility.
NOTE: HP Utility is located in the Hewlett-Packard folder in the Applications folder at the top level
of the hard disk.
2. Click Supplies Info.
The print cartridge ordering numbers appear.
3. Click All Settings to return to the Information and Support pane.
To order original HP supplies for the HP OfficeJet 4650 series, go to www.hp.com/buy/supplies . If prompted,
choose your country/region, and then follow the prompts to find the right cartridges for your printer.
NOTE: Ordering ink cartridges online is not supported in all countries/regions. If it is not available in your
country/region, you may still view supplies information and print a list for reference when shopping at a local
HP reseller.
Use single-cartridge mode
Use the single-cartridge mode to operate the HP OfficeJet 4650 series with only one ink cartridge. The single-
cartridge mode is initiated when an ink cartridge is removed from the ink cartridge carriage. During single-
cartridge mode, the printer can copy documents, copy photos, and print jobs from the computer.
NOTE: When the HP OfficeJet 4650 series operates in single-cartridge mode, a message is displayed on the
printer display. If the message is displayed and two ink cartridges are installed in the printer, verify that the
protective piece of plastic tape has been removed from each ink cartridge. When plastic tape covers the ink
cartridge contacts, the printer cannot detect that the ink cartridge is installed.
Exit single-cartridge mode
●Install two ink cartridges in the HP OfficeJet 4650 series to exit single-cartridge mode.
Cartridge warranty information
The HP cartridge warranty is applicable when the cartridge is used in its designated HP printing device. This
warranty does not cover HP ink cartridges that have been refilled, remanufactured, refurbished, misused, or
tampered with.
During the warranty period the cartridge is covered as long as the HP ink is not depleted and the end of
warranty date has not been reached. The end of warranty date, in YYYY/MM format, may be found on the
cartridge as indicated:
ENWW Use single-cartridge mode 53
For a copy of the HP Limited Warranty Statement for the printer, see the printed documentation that came
with the product.
Tips for working with cartridges
Use the following tips to work with cartridges:
●To protect the cartridges from drying out, always turn the printer off using the On button, and wait until
the On button light goes out.
●Do not open or untape cartridges until you are ready to install them. Leaving tape on the cartridges
reduces ink evaporation.
●Insert the cartridges into the correct slots. Match the color and icon of each cartridge to the color and
icon for each slot. Make sure the cartridges snap into place.
●Alignment is automatic after new cartridge installation. Alignment can also help later, in cases of
blurred or jagged lines. See Fix print quality issues on page 72 for more information.
●When the Estimated Ink Levels screen shows one or both cartridges in a low state, consider getting
replacement cartridges to avoid possible printing delays. You do not need to replace the cartridges until
print quality becomes unacceptable. See Replace the cartridges on page 51 for more information.
●If you remove a cartridge from the printer for any reason, try to replace it again as soon as possible.
Outside of the printer, if unprotected, cartridges begin to dry out.
54 Chapter 7 Work with cartridges ENWW
8 Connect Your Printer
Additional advanced settings are available from the printer's home page (embedded web server or EWS). For
more information, see Open the embedded Web server on page 61.
This section contains the following topics:
●Set up the printer for wireless communication
●Connect wirelessly to the printer without a router
●Change network settings
●Advanced printer management tools (for networked printers)
●Tips for setting up and using a networked printer
Set up the printer for wireless communication
●Before you begin
●Set up the printer on your wireless network
●Change the connection type
●Test the wireless connection
●Turn on or off the wireless capability of the printer
Before you begin
Ensure the following:
●The wireless network is set up and working properly.
●The printer and the computers that use the printer are on the same network (subnet).
While connecting the printer, you might be prompted to enter the wireless network name (SSID) and a
wireless password.
●The wireless network name is the name of your wireless network.
●The wireless password prevents other people from connecting to your wireless network without your
permission. Depending on the level of security required, your wireless network might use either a WPA
passphrase or WEP key.
If you have not changed the network name or the security passkey since setting up your wireless network,
you can sometimes find them on the back or side of the wireless router.
If you cannot find the network name or the security password or cannot remember this information, see the
documentation provided with your computer or with the wireless router. If you still cannot find this
information, contact your network administrator or the person who set up the wireless network.
Set up the printer on your wireless network
Use the Wireless Setup Wizard from the printer control panel display to set up wireless communication.
ENWW Set up the printer for wireless communication 55
NOTE: Before you proceed, go through the list at Before you begin on page 55.
1. From the printer control panel, touch ( Wireless ).
2. Touch ( Settings ).
3. Touch Wireless Setup Wizard.
4. Follow the display instructions to complete the setup.
Change the connection type
After you have installed the HP printer software and connected the printer to your computer, you can use the
software to change the connection type (for example, from a USB connection to a wireless connection).
To change from a USB connection to a wireless network (Windows)
Before you proceed, go through the list at Before you begin on page 55.
1. Depending on your operating system, do one of the following:
●Windows 8.1: Click the down arrow in lower left corner of the Start screen, select the printer
name, and then click Utilities.
●Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, select the
printer name, and then click Utilities.
●Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click the folder of your printer.
2. Click Printer Setup & Software.
3. Select Convert a USB connected printer to wireless. Follow the onscreen instructions.
To change from a USB connection to a wireless network
1. Connect the printer to your wireless network.
2. Use HP Setup Assistant in Applications/Hewlett-Packard/Device Utilities to change the software
connection to wireless for this printer.
Learn more about how to change from a USB to wireless connection. Click here to go online for more
information. At this time, this website might not be available in all languages.
Test the wireless connection
Print the wireless test report for information about the printer wireless connection. The wireless test report
provides information about the printer status, hardware (MAC) address, and IP address. If the printer is
connected to a network, the test report displays details about the network settings.
To print the wireless test report
1. From the printer control panel, touch ( Wireless ), and then touch ( Settings ).
2. Touch Print Reports
3. Touch Wireless Test Report.
56 Chapter 8 Connect Your Printer ENWW
Turn on or off the wireless capability of the printer
The blue Wireless light on the printer control panel is lit when the wireless capability of the printer is on.
1. From the printer control panel, touch ( Wireless ), and then touch ( Settings ).
2. Touch to turn Wireless on or off. If the printer is not configured to connect to a network, turning
wireless on automatically launches the Wireless Setup Wizard.
Connect wirelessly to the printer without a router
With Wi-Fi Direct, you can print wirelessly from a computer, smart phone, tablet, or other wireless-capable
device—without connecting to an existing wireless network.
Guidelines for using Wi-Fi Direct
●Make sure your computer or mobile device has the necessary software.
◦If you are using a computer, make sure you have installed the printer software provided with the
printer.
If you have not installed the HP printer software on the computer, connect to Wi-Fi Direct first and
then install the printer software. Select Wireless when prompted by the printer software for a
connection type.
◦If you are using a mobile device, make sure you have installed a compatible printing app. For more
information about mobile printing, visit www.hp.com/global/us/en/eprint/
mobile_printing_apps.html.
●Make sure Wi-Fi Direct for your printer is turned on.
●Wi-Fi Direct can be turned on using two modes:
◦Automatic mode: Allows any mobile device to connect to your printer.
◦Manual mode: Requires mobile devices to be confirmed at the printer control panel before they
can connect to your printer. This mode provides increased security. Additional prompts or PINs are
required before the connection can be established.
●Up to five computers and mobile devices can use the same Wi-Fi Direct connection.
●Wi-Fi Direct can be used while the printer is also connected either to a computer using a USB cable or to
a network using a wireless connection.
●Wi-Fi Direct cannot be used to connect a computer, mobile device, or printer to the Internet.
To turn on Wi-Fi Direct
1. From the printer control panel, touch (Wi-Fi Direct).
2. Touch ( Settings ), and then touch to turn on Wi-Fi Direct.
3. Touch ( Back ).
The Wi-Fi Direct Details menu appears with the Wi-Fi Direct name and password.
TIP: You can also turn on Wi-Fi Direct from the EWS. For more information about using the EWS, see Open
the embedded Web server on page 61.
ENWW Connect wirelessly to the printer without a router 57
To print from a wireless-capable mobile device that supports Wi-Fi Direct
Make sure you have installed the latest version of HP Print Service Plugin on your mobile device. You can
download this plugin from the Google Play application store.
1. Make sure you have turned on Wi-Fi Direct on the printer.
2. Turn on Wi-Fi Direct on your mobile device. For more information, see the documentation provided with
the mobile device.
3. From your mobile device, select a document from a print enabled application, and then select the option
to print the document.
The list of available printers appears.
4. From the list of available printers, choose the Wi-Fi Direct name shown such as DIRECT-**-
OfficeJet-4650 (where ** are the unique characters to identify your printer), and then follow the on-
screen instructions on the printer and your mobile device.
5. Print your document.
To print from a wireless-capable computer (Windows)
1. Make sure you have turned on Wi-Fi Direct on the printer.
2. Turn on the computer's Wi-Fi connection. For more information, see the documentation provided with
the computer.
NOTE: If your computer does not support Wi-Fi, you are not able to use Wi-Fi Direct.
3. From the computer, connect to a new network. Use the process you normally use to connect to a new
wireless network or hotspot. Choose the Wi-Fi Direct name from the list of wireless networks shown
such as DIRECT-**-OfficeJet-4650 (where ** are the unique characters to identify your printer and XXXX
is the printer model located on the printer).
Enter the Wi-Fi Direct password when prompted.
NOTE: To find the password, touch (Wi-Fi Direct) on the Home screen.
4. Proceed to step 5 if the printer has been installed and connected to the computer over a wireless
network. If the printer has been installed and connected to your computer with a USB cable, follow the
steps below to install the printer software using the HP Wi-Fi Direct connection.
a. Depending on your operating system, do one of the following:
●Windows 8.1: Click the down arrow in lower left corner of the Start screen, select the printer
name, and then click Utilities.
●Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar,
select the printer name, and then click Utilities.
●Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select
All Programs, click HP, click the folder of your printer.
b. Click Printer Setup & Software, and then select Connect a new printer.
c. When the Connection Options software screen appears, select Wireless.
Select your HP printer software from the list of detected printers.
d. Follow the on-screen instructions.
5. Print your document.
58 Chapter 8 Connect Your Printer ENWW
To print from a wireless-capable computer (OS X)
1. Make sure you have turned on Wi-Fi Direct on the printer.
2. Turn on Wi-Fi on the computer.
For more information, see the documentation provided by Apple.
3. Click the Wi-Fi icon and choose the Wi-Fi Direct name, such as DIRECT-**-OfficeJet-4650 (where ** are
the unique characters to identify your printer).
Enter the Wi-Fi Direct password when prompted.
NOTE: To find the password, touch (Wi-Fi Direct) on the Home screen.
4. Add the printer.
a. Open System Preferences .
b. Depending on your operating system, click Print, Scan & Fax or Printers & Scanners .
c. Click + below the list of printers at the left.
d. Select the printer from the list of detected printers (the word “Bonjour” is listed the right column
beside the printer name), and click Add.
Change network settings
From the printer control panel, you can set up and manage your printer wireless connection and perform a
variety of network management tasks. This includes viewing and changing network settings, restoring
network defaults, and turning the wireless function on or off.
CAUTION: Network settings are provided for your convenience. However, unless you are an advanced user,
you should not change some of these settings (such as the link speed, IP settings, default gateway, and
firewall settings).
To print the network configuration page
1. From the Home screen, touch (Wireless) and then touch ( Settings ).
2. Touch Print Reports and then touch Network Configuration Page.
To change IP settings
The default IP setting for the IP settings is Automatic, which sets the IP settings automatically. If you are an
advanced user and want to use different settings (such as the IP address, subnet mask, or the default
gateway), you can change them manually.
CAUTION: Be careful when manually assigning an IP address. If you enter an invalid IP address during the
installation, your network components cannot connect with the printer. To avoid errors, first let the printer
join the network and obtain an IP address automatically. After the subnet mask, default gateway, and DNS
address settings are configured, you can change the printer IP address to a manual setting.
1. From the Home screen, touch (Wireless) and then touch ( Settings ).
2. Touch Advanced Settings.
3. Touch IP Settings.
A message appears warning that changing the IP address removes the printer from the network.
ENWW Change network settings 59
4. Touch OK to continue.
5. Automatic is selected by default. To change the settings manually, touch Manual, and then enter the
appropriate information for the following settings:
●IP Address
●Subnet Mask
●Default Gateway
●DNS Address
6. Enter your changes, and then touch Apply.
Advanced printer management tools (for networked printers)
To view or change some settings, you might need a password.
NOTE: You can open and use the embedded Web server without being connected to the Internet. However,
some features are not available.
This section contains the following topics:
●Toolbox (Windows)
●HP Utility (OS X)
●Open the embedded Web server
●About cookies
Toolbox (Windows)
The Toolbox provides maintenance information about the printer.
NOTE: The Toolbox can be installed from the HP Software CD if the computer meets the system
requirements. System requirements can be found in the Readme file, which is available on the HP printer
software CD provided with your printer.
To open the Toolbox
1. Depending on your operating system, do one of the following:
●Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the
printer name.
●Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then
select the printer name.
●Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click the folder for the printer, and then select the icon with the printer's
name.
2. Click Print, Scan & Fax .
3. Click Maintain Your Printer.
60 Chapter 8 Connect Your Printer ENWW
HP Utility (OS X)
HP Utility contains tools to configure print settings, calibrate the printer, order supplies online, and find
website support information.
NOTE: The features available in HP Utility vary depending on the selected printer.
Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink
warning message, consider having a replacement cartridge available to avoid possible printing delays. You do
not need to replace cartridges until the print quality becomes unacceptable.
Double-click HP Utility in the Hewlett-Packard folder in the Applications folder at the top level of the hard
disk.
Open the embedded Web server
You can access the embedded Web server via either the network or Wi-Fi Direct.
To open the embedded Web server via network
NOTE: The printer must be on a network and must have an IP address. The IP address for the printer can be
found by pressing the Wireless icon or by printing a network configuration page.
●In a supported Web browser on your computer, type the IP address or hostname that has been assigned
to the printer.
For example, if the IP address is 192.168.0.12, type the following address into a Web browser: http://
192.168.0.12.
To open the embedded Web server using Wi-Fi Direct
1. From the Home screen, touch (Wi-Fi Direct).
2. If Wi-Fi Direct is Off, touch ( Settings ), and then touch to turn on Wi-Fi Direct.
3. From your wireless computer, turn wireless on, search for and connect to the Wi-Fi Direct name, for
example: DIRECT-**-OfficeJet-4650 (where ** are the unique characters to identify your printer). Enter
the Wi-Fi Direct password when prompted.
4. In a supported Web browser on your computer, type the printer IP address (for example, http://
192.168.223.1).
About cookies
The embedded Web server (EWS) places very small text files (cookies) on your hard drive when you are
browsing. These files let the EWS recognize your computer the next time you visit. For example, if you have
configured the EWS language, a cookie helps remember which language you have selected so that the next
time you access the EWS, the pages are displayed in that language. Some cookies (such as the cookie that
stores customer-specific preferences) are stored on the computer until you clear them manually.
You can configure your browser to accept all cookies, or you can configure it to alert you every time a cookie
is offered, which allows you to decide which cookies to accept or refuse. You can also use your browser to
remove unwanted cookies.
NOTE: Depending on your printer, if you disable cookies, you also disable one or more of the following
features:
ENWW Advanced printer management tools (for networked printers) 61
●Starting where you left the application (especially useful when using setup wizards)
●Remembering the EWS browser language setting
●Personalizing the EWS Home page
For information about how to change your privacy and cookie settings and how to view or delete cookies, see
the documentation available with your Web browser.
Tips for setting up and using a networked printer
Use the following tips to set up and use a networked printer:
●When setting up the wireless networked printer, make sure your wireless router is powered on. The
printer searches for wireless routers, then lists the detected network names on the display.
●To check the wireless connection on the printer, touch the (Wireless) on the control panel to open
the Wireless menu. If it shows that Wireless is Off, touch to turn the wireless connection on. The
Wireless Setup Wizard starts automatically. Follow the on-screen instructions to set up your printer
wireless connection.
●If your computer is connected to a Virtual Private Network (VPN), you need to disconnect from the VPN
before you can access any other device on your network, including the printer.
●Learn more about configuring your network and the printer for wireless printing. Click here to go online
for more information.
●Learn how to find your network security settings. Click here to go online for more information.
●Learn about the Print and Scan Doctor (Windows only) and other troubleshooting tips. Click here to go
online for more information.
●Learn how to change from a USB to wireless connection. Click here to go online for more information.
●Learn how to work with your firewall and anti-virus programs during printer setup. Click here to go
online for more information.
62 Chapter 8 Connect Your Printer ENWW
9 Solve a problem
This section contains the following topics:
●Jams and paper-feed issues
●Ink cartridge issues
●Printing issues
●Copy issues
●Scan issues
●Fax issues
●Network and connection issues
●Printer hardware issues
●HP support
Jams and paper-feed issues
What do you want to do?
Clear a paper jam
Solve paper jam
issues
Use an HP online troubleshooting wizard.
Instructions for clearing the jam in the printer or in the automatic document feeder and resolving issues with
paper or the paper feed.
NOTE: The HP online troubleshooting wizards may not be available in all languages.
Read general instructions in the Help for clearing paper jams
Paper jams can occur in several locations inside the printer.
CAUTION: To prevent possible damage to the printhead, clear paper jams as soon as possible.
To clear an internal paper jam
CAUTION: Avoid pulling jammed paper from the front of the printer. Instead follow the steps below to clear
the jam. Pulling out jammed paper from the front of the printer might cause the paper to tear and leave torn
pieces inside the printer; this could result in more jams later.
1. Check the paper path inside the printer.
a. Open the cartridge access door.
ENWW Jams and paper-feed issues 63
b. Remove the paper path cover.
c. Lift the duplexer cover up and remove jammed paper.
d. Reinsert the paper path cover. Make sure it snaps into place.
64 Chapter 9 Solve a problem ENWW
e. Close the cartridge access door.
f. Touch OK on the control panel to continue the current job.
2. If the problem is not resolved, check the print carriage area inside the printer.
CAUTION: During the process, avoid touching the cable attached to the print carriage.
a. Open the cartridge access door.
b. If there is any jammed paper, move the print carriage to the far right of the printer, grasp the
jammed paper with both hands, and then pull it towards you.
CAUTION: If the paper tears when you are removing it from the rollers, check the rollers and
wheels for torn pieces of paper that might be remaining inside the printer.
If you do not remove all the pieces of paper from the printer, more paper jams are likely to occur.
c. Move the carriage to the far left of the printer, and do the same as in the previous step to remove
any torn pieces of paper.
d. Close the cartridge access door.
e. Touch OK on the control panel to continue the current job.
To get help from the print display, touch Help from the Home screen, touch How to Videos, and then
touch Clear Carriage Jam.
3. If the problem is still not resolved, check the tray area.
a. Pull out the paper tray to extend it.
ENWW Jams and paper-feed issues 65
b. Carefully turn the printer on its side to expose the bottom of the printer.
c. Check the gap in the printer where the input tray was. If there is any jammed paper, reach into the
gap, grasp the paper with both hands and pull it towards you.
CAUTION: If the paper tears when you are removing it from the rollers, check the rollers and
wheels for torn pieces of paper that might be remaining inside the printer.
If you do not remove all of the pieces of paper from the printer, more paper jams are likely to
occur.
d. Carefully turn the printer up again.
e. Push the paper tray back in.
f. Touch OK on the control panel to continue the current job.
To clear a paper jam in the document feeder
1. Lift the cover of the document feeder.
2. Gently pull the jammed paper out of the rollers.
CAUTION: If the paper tears when you are removing it from the rollers, check the rollers and wheels
for torn pieces of paper that might remain inside the printer.
If you do not remove all the pieces of paper from the printer, more paper jams are likely to occur.
3. Close the document feeder cover, pressing down firmly until it snaps into place.
66 Chapter 9 Solve a problem ENWW
Learn how to avoid paper jams
To help avoid paper jams, follow these guidelines.
●Remove printed papers from the output tray frequently.
●Make sure that you are printing with paper that is not wrinkled, folded, or damaged.
●Prevent curled or wrinkled paper by storing all unused paper flat in a resealable bag.
●Do not use paper that is too thick or too thin for the printer.
●Make sure that the trays are loaded correctly and are not too full. For more information, see Load media
on page 8.
●Ensure that paper loaded in the input tray lays flat and the edges are not bent or torn.
●Do not combine different paper types and paper sizes in the input tray; the entire stack of paper in the
input tray must be the same size and type.
●Adjust the paper-width guides in the input tray to fit snugly against all paper. Make sure the paper-
width guides do not bend the paper in the input tray.
●Do not force paper too far inside the input tray.
●If you are printing on both sides of a page, do not print highly saturated images on light weight paper.
●Use paper types that are recommended for the printer. For more information, see Paper basics
on page 6.
●If the printer is about to run out of paper, allow the printer to run out of paper first, and then add paper.
Do not load paper when the printer is printing.
Solve paper-feed problems
What kind of problem are you having?
●Paper is not picked up from a tray
◦Make sure paper is loaded in the tray. For more information, see Load media on page 8. Fan the
paper before loading.
◦Make sure the paper-width guides are set to the correct markings in the tray for the paper size you
are loading. Also make sure the paper guides are snug, but not tight, against the stack.
◦Make sure paper in the tray is not curled. Uncurl paper by bending it in the opposite direction of the
curl.
●Pages are skewing
◦Make sure the paper loaded in the input tray is aligned to the paper-width guides. If needed, pull
out the input tray from the printer and reload the paper correctly, making sure that the paper
guides are aligned correctly.
◦Load paper into the printer only when it is not printing.
●Multiple pages are being picked up
◦Make sure the paper-width guides are set to the correct markings in the tray for the paper size you
are loading. Also make sure the paper-width guides are snug, but not tight, against the stack.
◦Make sure the tray is not overloaded with paper.
◦Use HP paper for optimum performance and efficiency.
ENWW Jams and paper-feed issues 67
Ink cartridge issues
Fix ink cartridge problems
If an error occurs after a cartridge is installed, or if a message indicates a cartridge problem, try removing the
ink cartridges, verifying the protective piece of plastic tape has been removed from each ink cartridge, and
then reinserting the ink cartridges. If this does not work, clean the cartridge contacts. If the problem is still
not resolved, replace the ink cartridges. For information about replacing ink cartridges, see Replace the
cartridges on page 51.
To clean cartridge contacts
CAUTION: The cleaning procedure should take only a few minutes. Make sure that the ink cartridges are
reinstalled in the product as soon as possible. It is not recommended to leave the ink cartridges outside of
the product longer than 30 minutes. This could result in damage to the ink cartridges.
1. Check that power is on.
2. Open the cartridge access door.
3. Remove the cartridge indicated in the error message.
4. Hold the ink cartridge by its sides with the bottom pointing up and locate the electrical contacts on the
ink cartridge. The electrical contacts are the small gold-colored dots on the ink cartridge.
Feature Description
1Electrical contacts
5. Wipe only the contacts with a damp lint-free cloth.
CAUTION: Be careful to touch only the contacts, and do not smear any of the ink or other debris
elsewhere on the cartridge.
6. On the inside of the printer, locate the contacts in the print carriage. The contacts look like a set of gold-
colored bumps positioned to meet the contacts on the ink cartridge.
7. Use a dry swab or lint-free cloth to wipe the contacts.
8. Reinstall the ink cartridge.
68 Chapter 9 Solve a problem ENWW
9. Close the access door, and check if the error message has gone away.
10. If you still receive the error message, turn the product off, and then on again.
NOTE: If one ink cartridge is causing problems, you can remove it and use the single-cartridge mode to
operate the HP OfficeJet 4650 series with only one cartridge.
Fix ink cartridge incompatible issues
The ink cartridge is not compatible with your printer. Replace it with a new ink cartridge. For more
information, see Replace the cartridges on page 51.
Printing issues
What do you want to do?
Fix problems with page not printing (unable to print)
HP Print and Scan Doctor The HP Print and Scan Doctor is a utility that will try to diagnose and fix the issue
automatically.
Troubleshoot problems with print
jobs not printing
Use an HP online troubleshooting wizard.
Get step-by-step instructions if the printer is not responding or printing.
NOTE: The HP Print and Scan Doctor and the HP online troubleshooting wizards may not be available in all
languages.
Read general instructions in the Help for unable to print issues
Resolve print issues
Make sure that the printer is turned on and that there is paper in the tray. If you are still unable to print, try
the following in order:
1. Check for error messages from the printer display and resolve them by following the onscreen
instructions.
2. If your computer is connected to the printer with a USB cable, disconnect and reconnect the USB cable. If
your computer is connected to the printer with a wireless connection, confirm that the connection is
working.
3. Verify that the printer is not paused or offline.
To verify that the printer is not paused or offline
a. Depending on your operating system, do one of the following:
●Windows 8.1 and Windows 8: Point to or tap the upper-right corner of the screen to open the
Charms bar, click the Settings icon, click or tap Control Panel, and then click or tap View
devices and printers.
●Windows 7: From the Windows Start menu, click Devices and Printers.
ENWW Printing issues 69
●Windows Vista: From the Windows Start menu, click Control Panel, and then click Printers.
●Windows XP: From the Windows Start menu, click Control Panel, and then click Printers and
Faxes.
b. Either double-click the icon for your printer or right-click the icon for your printer and select See
what’s printing to open the print queue.
c. On the Printer menu, make sure there are no check marks next to Pause Printing or Use Printer
Offline.
d. If you made any changes, try to print again.
4. Verify that the printer is set as the default printer.
To verify that the printer is set as the default printer
a. Depending upon your operating system, do one of the following:
●Windows 8.1 and Windows 8: Point to or tap the upper-right corner of the screen to open the
Charms bar, click the Settings icon, click or tap Control Panel, and then click or tap View
devices and printers.
●Windows 7: From the Windows Start menu, click Devices and Printers.
●Windows Vista: From the Windows Start menu, click Control Panel, and then click Printers.
●Windows XP: From the Windows Start menu, click Control Panel, and then click Printers and
Faxes.
b. Make sure the correct printer is set as the default printer.
The default printer has a check mark in a black or green circle next to it.
c. If the wrong printer is set as the default printer, right-click the correct printer and select Set as
Default Printer.
d. Try using your printer again.
5. Restart the print spooler.
To restart the print spooler
a. Depending upon your operating system, do one of the following:
Windows 8.1 and Windows 8
i. Point to or tap the upper-right corner of the screen to open the Charms bar, and then click
the Settings icon.
ii. Click or tap Control Panel, and then click or tap System and Security.
iii. Click or tap Administrative Tools, and then double-click or double-tap Services.
iv. Right-click or touch and hold Print Spooler, and then click Properties.
v. On the General tab, next to Startup type, make sure that Automatic is selected.
vi. If the service is not already running, under Service status, click or tap Start, and then click or
tap OK.
70 Chapter 9 Solve a problem ENWW
Windows 7
i. From the Windows Start menu, click Control Panel, System and Security, and then
Administrative Tools.
ii. Double-click Services.
iii. Right-click the Print Spooler, and then click Properties.
iv. On the General tab, next to Startup type, make sure that Automatic is selected.
v. If the service is not already running, under Service status, click Start, and then click OK.
Windows Vista
i. From the Windows Start menu, click Control Panel, System and Maintenance,
Administrative Tools.
ii. Double-click Services.
iii. Right-click the Print Spooler service, and then click Properties.
iv. On the General tab, next to Startup type, make sure that Automatic is selected.
v. If the service is not already running, under Service status, click Start, and then click OK.
Windows XP
i. From the Windows Start menu, right click My Computer.
ii. Click Manage, and then click Services and Applications.
iii. Double-click Services, and then select Print Spooler.
iv. Right-click Print Spooler, and click Restart to restart the service.
b. Try using your printer again.
6. Restart the computer.
7. Clear the print queue.
To clear the print queue
a. Depending upon your operating system, do one of the following:
●Windows 8.1 and Windows 8: Point to or tap the upper-right corner of the screen to open the
Charms bar, click the Settings icon, click or tap Control Panel, and then click or tap View
devices and printers.
●Windows 7: From the Windows Start menu, click Devices and Printers.
●Windows Vista: From the Windows Start menu, click Control Panel, and then click Printers.
●Windows XP: From the Windows Start menu, click Control Panel, and then click Printers and
Faxes.
b. Double-click the icon for your printer to open the print queue.
c. On the Printer menu, click Cancel all documents or Purge Print Document, and then click Yes to
confirm.
ENWW Printing issues 71
d. If there are still documents in the queue, restart the computer and try printing again after the
computer has restarted.
e. Check the print queue again to make sure it is clear, and then try to print again.
To check the power connection and reset the printer
1. Make sure the power cord is firmly connected to the printer.
1Power connection to the printer
2Connection to a power outlet
2. Look inside the printer and check for a green light indicating the printer is receiving electrical power. If it
is not lit, make sure the cord is fully plugged into the printer, or connect to another power outlet.
3. Look at the On button located on the printer. If it is not lit, the printer is turned off. Press the On button
to turn on the printer.
NOTE: If the printer is not receiving electrical power, connect it to another power outlet.
4. With the printer turned on, disconnect the power cord from the side of the printer under the cartridge
access door.
5. Unplug the power cord from the wall outlet.
6. Wait at least 15 seconds.
7. Plug the power cord back into the wall outlet.
8. Reconnect the power cord to the side of the printer under the cartridge access door.
9. If the printer does not turn on by itself, press the On button to turn on the printer.
10. Try using the printer again.
Fix print quality issues
Step-by-step instructions for resolving most print quality issues Troubleshoot print quality issues online.
Read general instructions in the Help for resolving print quality issues
NOTE: To avoid print quality problems, always turn the printer off using the On button, and wait until the
On button light goes out before you pull the plug or turn off a power strip. This allows the printer to move the
cartridges to a capped position, where they are protected from drying out.
72 Chapter 9 Solve a problem ENWW
To improve print quality
1. Make sure you are using original HP ink cartridges.
2. Check the printer software to make sure you have selected the appropriate paper type from the Media
drop-down list and print quality from the Quality Settings drop-down list.
●In the printer software, click Print, Scan & Fax and then click Set Preferences to access the print
properties.
3. Check the estimated ink levels to determine if the cartridges are low on ink. For more information, see
Check the estimated ink levels on page 50. If the ink cartridges are low on ink consider replacing them.
4. Check the paper type.
For best print quality, use high quality HP paper, or papers that adhere to the ColorLok® standard. For
more information, see Paper basics on page 6.
Always make sure the paper you are printing on is flat. For best results when printing images, use HP
Advanced Photo Paper.
Store specialty paper in its original packaging inside a resealable plastic bag on a flat surface in a cool,
dry place. When you are ready to print, remove only the paper you plan to use immediately. When you
have finished printing, return any unused photo paper to the plastic bag. This prevents the photo paper
from curling.
5. Align the cartridges.
To align the cartridges from the printer software
NOTE: Aligning the cartridges ensures the high-quality output. The HP All-in-One prompts you to align
the cartridges every time you install a new cartridge. If you remove and reinstall the same ink cartridge,
the HP All-in-One will not prompt you to align the ink cartridges. The HP All-in-One remembers the
alignment values for that ink cartridge, so you do not need to realign the ink cartridges.
a. Load letter or A4 unused plain white paper into the paper tray.
b. Depending on your operating system, do one of the following to open the printer software:
●Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select
the printer name.
●Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and
then select the printer name.
●Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select
All Programs, click HP, click the folder for the printer, and then select the icon with the
printer's name.
c. In the printer software, click Print, Scan & Fax , and then click Maintain Your Printer to access the
Printer Toolbox.
d. In Printer Toolbox, click Align Ink Cartridges on the Device Services tab. The printer prints an
alignment sheet.
ENWW Printing issues 73
e. Load the cartridge alignment sheet print side down on the right front corner of the scanner glass.
f. Follow the instructions on the printer display to align the cartridges. Recycle or discard the
cartridge alignment sheet.
To align the cartridges from the printer display
a. Load Letter or A4 unused plain white paper into the input tray.
b. From the printer control panel display, touch Tools .
c. Touch Align Printer, and then follow the on-screen instructions.
6. Print a diagnostics page if the cartridges are not low on ink.
To print a diagnostics page from the printer software
a. Load letter or A4 unused plain white paper into the paper tray.
b. Depending on your operating system, do one of the following to open the printer software:
●Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select
the printer name.
●Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and
then select the printer name.
●Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select
All Programs, click HP, click the folder for the printer, and then select the icon with the
printer's name.
c. In the printer software, click Print, Scan & Fax , and then click Maintain Your Printer to access the
printer toolbox.
d. Click Print Diagnostic Information on the Device Reports tab to print a diagnostics page. Review
the blue, magenta, yellow, and black boxes on the diagnostics page. If you are seeing streaks in
the color and black boxes, or no ink in portions of the boxes, then automatically clean the
cartridges.
To print a diagnostics page from the printer display
a. Load letter or A4 unused plain white paper into the paper tray.
b. From the printer control panel, touch Tools .
c. Touch Print Quality Report.
7. Clean the ink cartridges automatically, if the diagnostic page shows steaks or missing portions of the
color and black boxes.
74 Chapter 9 Solve a problem ENWW
To clean the cartridges from the printer software
a. Load letter or A4 unused plain white paper into the paper tray.
b. Depending on your operating system, do one of the following to open the printer software:
●Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select
the printer name.
●Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and
then select the printer name.
●Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select
All Programs, click HP, click the folder for the printer, and then select the icon with the
printer's name.
c. In the printer software, click Print, Scan & Fax and then click Maintain Your Printer to access the
Printer Toolbox.
d. Click Clean Ink Cartridges on the Device Services tab. Follow the on-screen instructions.
To clean the cartridges from the printer display
a. Load Letter or A4 unused plain white paper into the input tray.
b. From the printer control panel display, touch Tools .
c. Touch Clean Cartridges, and then follow the on-screen instructions.
If cleaning the cartridges does not solve the problem, contact HP support. Go to www.hp.com/support .
This website provides information and utilities that can help you correct many common printer
problems. If prompted, select your country/region, and then click All HP Contacts for information on
calling for technical support.
To improve print quality (OS X)
1. Make sure you are using original HP cartridges.
2. Make sure you have selected the appropriate paper type and print quality in the Print dialog.
3. Check the estimated ink levels to determine if the cartridges are low on ink.
Consider replacing the print cartridges if they are low on ink.
4. Check the paper type.
For best print quality, use high quality HP paper, or papers that adhere to the ColorLok® standard. For
more information, see Paper basics on page 6.
Always make sure the paper you are printing on is flat. For best results when printing images, use HP
Advanced Photo Paper.
Store specialty paper in its original packaging inside a resealable plastic bag on a flat surface in a cool,
dry place. When you are ready to print, remove only the paper you plan to use immediately. When you
have finished printing, return any unused photo paper to the plastic bag. This prevents the photo paper
from curling.
5. Align the printer cartridges.
ENWW Printing issues 75
To align print cartridges from the software
a. Load Letter or A4 plain, white paper in the paper tray.
b. Open HP Utility.
NOTE: HP Utility is located in the Hewlett-Packard folder in the Applications folder at the top
level of the hard disk.
c. Select the HP OfficeJet 4650 series from the list of devices at the left of the window.
d. Click Align.
e. Click Align and follow the on-screen instructions.
f. Click All Settings to return to the Information and Support pane.
6. Print a test page.
To print a test page
a. Load Letter or A4 plain, white paper in the paper tray.
b. Open HP Utility.
NOTE: HP Utility is located in the Hewlett-Packard folder in the Applications folder at the top
level of the hard disk.
c. Select the HP OfficeJet 4650 series from the list of devices at the left of the window.
d. Click Test Page.
e. Click the Print Test Page button, and follow the on-screen instructions.
Check the test page for jagged lines in the text or streaks in the text and colored boxes. If you are
seeing jagged lines, or streaks, or no ink in portions of the boxes, then automatically clean the
cartridges.
7. If the diagnostic page shows steaks or missing portions of the text or colored boxes, clean the print
cartridges automatically.
To automatically clean the print head
a. Load Letter or A4 plain, white paper in the paper tray.
b. Open HP Utility.
NOTE: HP Utility is located in the Hewlett-Packard folder in the Applications folder at the top
level of the hard disk.
c. Select the HP OfficeJet 4650 series from the list of devices at the left of the window.
d. Click Clean Printheads.
e. Click Clean, and follow the on-screen instructions.
CAUTION: Clean the print head only when necessary. Unnecessary cleaning wastes ink and
shortens the life of the print head.
NOTE: If print quality still seems poor after you complete cleaning, try aligning the printer. If
print quality problems persist after cleaning and aligning, contact HP support.
f. Click All Settings to return to the Information and Support pane.
76 Chapter 9 Solve a problem ENWW
Fix ink smears on printouts
If a printout shows smears of ink, for subsequent prints, try using the Clean Ink Smear function from the
printer display. This process takes several minutes to complete. Full-size plain paper needs to be loaded and
will be moved back and forth during the cleaning. Mechanical noises are normal at this time.
1. Load Letter or A4 unused plain white paper into the input tray.
2. From the printer control panel display, touch Tools .
3. Touch Clean Page Smears, and then follow the on-screen instructions.
NOTE: You can also do the same from the HP printer software or embedded web server (EWS). To access
the software or EWS, see Open the HP printer software (Windows) on page 11 or Open the embedded Web
server on page 61.
Copy issues
Troubleshoot copy problems Use an HP online troubleshooting wizard.
Get step-by-step instructions if the printer does not create a copy, or if your printouts are low quality.
NOTE: The HP online troubleshooting wizards may not be available in all languages.
Tips for copy and scan success on page 26
Scan issues
HP Print and Scan Doctor The HP Print and Scan Doctor is a utility that will try to diagnose and fix the issue automatically.
Solve scan problems Use an HP online troubleshooting wizard.
Get step-by-step instructions if you cannot create a scan or if your scans are low quality.
NOTE: The HP Print and Scan Doctor and the HP online troubleshooting wizards may not be available in all
languages.
Tips for copy and scan success on page 26
Fax issues
Run the fax test report first to see if there is a problem with your fax setup. If the test passes and you are still
having problems faxing, check the fax settings listed in the report to verify that the settings are correct.
Run the fax test
You can test your fax setup to check the status of the printer and to make sure it is set up correctly for faxing.
Perform this test only after you have completed fax setup on the printer. The test does the following:
●Tests the fax hardware
●Verifies that the correct type of phone cord is connected to the printer
●Checks that the phone cord is plugged into the correct port
ENWW Copy issues 77
●Checks for a dial tone
●Tests the status of your phone line connection
●Checks for an active phone line
To test fax setup via the printer control panel
1. Set up the printer for faxing according to your particular home or office setup instructions.
2. Make sure the ink cartridges are installed and that full-size paper is loaded in the input tray before
starting the test.
3. On the Fax screen, touch Setup , touch Setup Wizard, and then follow the onscreen instructions.
The printer displays the status of the test on the display and prints a report.
4. Review the report.
●If the fax test failed, review the solutions below.
●If the fax test passed and you are still having problems faxing, verify that the fax settings listed in
the report are correct. You can also use HP's online troubleshooting wizard.
What to do if the fax test failed
If you ran a fax test and the test failed, review the report for basic information about the error. For more
detailed information, check the report to see which part of the test failed, and then review the appropriate
topic in this section for solutions to try.
The "Fax Hardware Test" failed
●Turn the printer off by pressing (Power button) located on the printer control panel and then unplug
the power cord from the back of the printer. After a few seconds, plug the power cord in again, and then
turn the power on. Run the test again. If the test fails again, continue reviewing the troubleshooting
information in this section.
●Try to send or receive a test fax. If you can send or receive a fax successfully, there might not be
a problem.
●If you are running the test from the Fax Setup Wizard (Windows) or HP Utility (OS X), make sure the
printer is not busy completing another task, such as receiving a fax or making a copy. Check the display
for a message indicating that the printer is busy. If it is busy, wait until it is finished and in the idle state
before running the test.
●Make sure you use the phone cord that came with the printer. If you do not use the supplied phone cord
to connect from the telephone wall jack to the printer, you might not be able to send or receive faxes.
After you plug in the phone cord that came with the printer, run the fax test again.
●If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that
plugs into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the
telephone wall jack.
After you resolve any problems found, run the fax test again to make sure it passes and the printer is ready
for faxing. If the Fax Hardware Test continues to fail and you experience problems faxing, contact HP
support. Go to www.hp.com/support . This website provides information and utilities that can help you
correct many common printer problems. If prompted, select your country/region, and then click All HP
Contacts for information on calling for technical support.
78 Chapter 9 Solve a problem ENWW
The "Fax Connected to Active Telephone Wall Jack" test failed
●Check the connection between the telephone wall jack and the printer to make sure the phone cord is
secure.
●Make sure you use the phone cord that came with the printer. If you do not use the supplied phone cord
to connect from the telephone wall jack to the printer, you might not be able to send or receive faxes.
After you plug in the phone cord that came with the printer, run the fax test again.
●Make sure you have correctly connected the printer to the telephone wall jack. Using the phone cord
supplied in the box with the printer, connect one end to your telephone wall jack, then connect the other
end to the port labeled 1-LINE on the back of the printer.
Learn more about fax setup and test, click here to go online for more information.
●If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that
plugs into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the
telephone wall jack.
●Try connecting a working phone and phone cord to the telephone wall jack that you are using for the
printer and check for a dial tone. If you do not hear a dial tone, contact your telephone company and
have them check the line.
●Try to send or receive a test fax. If you can send or receive a fax successfully, there might not be
a problem.
After you resolve any problems found, run the fax test again to make sure it passes and the printer is ready
for faxing.
The "Phone Cord Connected to Correct Port on Fax" test failed
Make sure you use the phone cord that came with the printer. If you do not use the supplied phone cord to
connect from the telephone wall jack to the printer, you might not be able to send or receive faxes. After you
plug in the phone cord that came with the printer, run the fax test again.
If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that plugs
into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the telephone wall
jack.
Plug the phone cord into the correct port
1. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack,
then connect the other end to the port labeled 1-LINE on the back of the printer.
NOTE: If you use the 2-EXT port to connect to the telephone wall jack, you cannot send or receive
faxes. The 2-EXT port should only be used to connect other equipment, such as an answering machine.
ENWW Fax issues 79
Figure 9-1 Back view of the printer
1Telephone wall jack
2Use the phone cord supplied in the box with the printer to connect to the "1-LINE" port
2. After you have connected the phone cord to the port labeled 1-LINE, run the fax test again to make sure
it passes and the printer is ready for faxing.
3. Try to send or receive a test fax.
The "Using Correct Type of Phone Cord with Fax" test failed
●Make sure you used the phone cord supplied in the box with the printer to connect to the telephone wall
jack. One end of the phone cord should be connected to the port labeled 1-LINE on the back of the
printer, and the other end to your telephone wall jack, as shown in the illustration.
1Telephone wall jack
2Use the phone cord supplied in the box with the printer to connect to the "1-LINE" port
If the phone cord that came with the printer is not long enough, you can use a longer 2-wire phone cord
to extend the length. You can purchase the cord at an electronics store that carries phone accessories.
●Check the connection between the telephone wall jack and the printer to make sure the phone cord is
secure.
80 Chapter 9 Solve a problem ENWW
●Make sure you use the phone cord that came with the printer. If you do not use the supplied phone cord
to connect from the telephone wall jack to the printer, you might not be able to send or receive faxes.
After you plug in the phone cord that came with the printer, run the fax test again.
●If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that
plugs into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the
telephone wall jack.
The "Dial Tone Detection" test failed
●Other equipment, which uses the same phone line as the printer, might be causing the test to fail. To
find out if other equipment is causing a problem, disconnect everything from the phone line, and then
run the test again. If the Dial Tone Detection Test passes without the other equipment, then one or
more pieces of the equipment is causing problems; try adding them back one at a time and rerunning
the test each time, until you identify which piece of equipment is causing the problem.
●Try connecting a working phone and phone cord to the telephone wall jack that you are using for the
printer and check for a dial tone. If you do not hear a dial tone, contact your telephone company and
have them check the line.
●Make sure you have correctly connected the printer to the telephone wall jack. Using the phone cord
supplied in the box with the printer, connect one end to your telephone wall jack, then connect the other
end to the port labeled 1-LINE on the back of the printer.
●If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that
plugs into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the
telephone wall jack.
●If your telephone system is not using a standard dial tone, such as some private branch exchange (PBX)
systems, this might cause the test to fail. This does not cause a problem sending or receiving faxes. Try
sending or receiving a test fax.
●Check to make sure the country/region setting is set appropriately for your country/region. If the
country/region setting is not set or is set incorrectly, the test might fail and you might have problems
sending and receiving faxes.
●Make sure you connect the printer to an analog phone line or you cannot send or receive faxes. To check
if your phone line is digital, connect a regular analog phone to the line and listen for a dial tone. If you
do not hear a normal sounding dial tone, it might be a phone line set up for digital phones. Connect the
printer to an analog phone line and try sending or receiving a fax.
●Make sure you use the phone cord that came with the printer. If you do not use the supplied phone cord
to connect from the telephone wall jack to the printer, you might not be able to send or receive faxes.
After you plug in the phone cord that came with the printer, run the fax test again.
After you resolve any problems found, run the fax test again to make sure it passes and the printer is ready
for faxing. If the Dial Tone Detection test continues to fail, contact your telephone company and have them
check the phone line.
The "Fax Line Condition" test failed
●Make sure you connect the printer to an analog phone line or you cannot send or receive faxes. To check
if your phone line is digital, connect a regular analog phone to the line and listen for a dial tone. If you
do not hear a normal sounding dial tone, it might be a phone line set up for digital phones. Connect the
printer to an analog phone line and try sending or receiving a fax.
●Check the connection between the telephone wall jack and the printer to make sure the phone cord is
secure.
ENWW Fax issues 81
●Make sure you have correctly connected the printer to the telephone wall jack. Using the phone cord
supplied in the box with the printer, connect one end to your telephone wall jack, then connect the other
end to the port labeled 1-LINE on the back of the printer.
●Other equipment, which uses the same phone line as the printer, might be causing the test to fail. To
find out if other equipment is causing a problem, disconnect everything from the phone line, and then
run the test again.
◦If the Fax Line Condition Test passes without the other equipment, then one or more pieces of the
equipment is causing problems; try adding them back one at a time and rerunning the test each
time, until you identify which piece of equipment is causing the problem.
◦If the Fax Line Condition Test fails without the other equipment, connect the printer to a working
phone line and continue reviewing the troubleshooting information in this section.
●If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that
plugs into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the
telephone wall jack.
●Make sure you use the phone cord that came with the printer. If you do not use the supplied phone cord
to connect from the telephone wall jack to the printer, you might not be able to send or receive faxes.
After you plug in the phone cord that came with the printer, run the fax test again.
After you resolve any problems found, run the fax test again to make sure it passes and the printer is ready
for faxing. If the Fax Line Condition test continues to fail and you experience problems faxing, contact your
telephone company and have them check the phone line.
Troubleshoot fax problems.
Troubleshoot fax problems. Use an HP online troubleshooting wizard.
Resolve problems sending or receiving a fax or faxing to your computer.
NOTE: The HP online troubleshooting wizards may not be available in all languages.
Read general instructions in the Help for specific fax problems
What kind of fax problem are you having?
The display always shows Phone Off Hook
●You are using the wrong type of phone cord. Make sure you are using the 2-wire phone cord that came
with the printer to connect the printer to your phone line. If the phone cord that came with the printer is
not long enough, you can use a longer phone cord to extend the length. You can purchase the cord at an
electronics store that carries phone accessories.
●Other equipment that uses the same phone line as the printer might be in use. Make sure extension
phones (phones on the same phone line, but not connected to the printer) or other equipment are not in
use or off the hook. For example, you cannot use the printer for faxing if an extension phone is off the
hook, or if you are using a computer dial-up modem to send email or access the Internet.
The printer is having problems sending and receiving faxes
●Make sure the printer is turned on. Look at the display on the printer. If the display is blank and (the
Power button) light is not lit, the printer is turned off. Make sure the power cord is firmly connected to
the printer and plugged into a power outlet. Press (the Power button) to turn on the printer.
82 Chapter 9 Solve a problem ENWW
After turning on the printer, HP recommends you wait five minutes before sending or receiving a fax.
The printer cannot send or receive faxes while it is initializing after being turned on.
●Make sure you used the phone cord supplied in the box with the printer to connect to the telephone wall
jack. One end of the phone cord should be connected to the port labeled 1-LINE on the back of the
printer and the other end to your telephone wall jack, as shown in the illustration.
1Telephone wall jack
2Use the phone cord supplied in the box with the printer to connect to the "1-LINE" port
If the phone cord that came with the printer is not long enough, you can use a longer 2-wire phone cord
to extend the length. You can purchase the cord at an electronics store that carries phone accessories.
●Try connecting a working phone and phone cord to the telephone wall jack that you are using for the
printer and check for a dial tone. If you do not hear a dial tone, call your local telephone company for
service.
●Other equipment, which uses the same phone line as the printer, might be in use. For example, you
cannot use the printer for faxing if an extension phone is off the hook, or if you are using a computer
dial-up modem to send an email or access the Internet.
●Check to see if another process has caused an error. Check the display or your computer for an error
message providing information about the problem and how to solve it. If there is an error, the printer
cannot send or receive a fax until the error condition is resolved.
●The phone line connection might be noisy. Phone lines with poor sound quality (noise) can cause faxing
problems. Check the sound quality of the phone line by plugging a phone into the telephone wall jack
and listening for static or other noise. If you hear noise, turn Error Correction Mode (ECM) off and try
faxing again. For information about changing ECM, see Send a fax in Error Correction Mode on page 32.
If the problem persists, contact your telephone company.
●If you are using a digital subscriber line (DSL) service, make sure that you have a DSL filter connected or
you cannot fax successfully. Click here to go online for more information.
●Make sure the printer is not connected to a telephone wall jack that is set up for digital phones. To check
if your phone line is digital, connect a regular analog phone to the line and listen for a dial tone. If you
do not hear a normal sounding dial tone, it might be a phone line set up for digital phones.
●If you are using either a private branch exchange (PBX) or an integrated services digital network (ISDN)
converter/terminal adapter, make sure the printer is connected to the correct port and the terminal
adapter is set to the correct switch type for your country/region, if possible. Click here to go online for
more information.
●If the printer shares the same phone line with a DSL service, the DSL modem might not be grounded
correctly. If the DSL modem is not grounded correctly, it can create noise on the phone line. Phone lines
ENWW Fax issues 83
with poor sound quality (noise) can cause faxing problems. You can check the sound quality of the
phone line by plugging a phone into the telephone wall jack and listening for static or other noise. If you
hear noise, turn off your DSL modem and completely remove power for at least 15 minutes. Turn the
DSL modem back on and listen to the dial tone again.
NOTE: You might notice static on the phone line again in the future. If the printer stops sending and
receiving faxes, repeat this process.
If the phone line is still noisy, contact your telephone company. For information on turning your DSL
modem off, contact your DSL provider for support.
●If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that
plugs into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the
telephone wall jack.
The printer cannot receive faxes, but can send faxes
●If you are not using a distinctive ring service, check to make sure that the Distinctive Ring feature on
the printer is set to All Rings . For more information, see Change the answer ring pattern for distinctive
ring on page 39.
●If Auto Answer is set to Off , you need to receive faxes manually; otherwise, the printer cannot receive
the fax. For information on receiving faxes manually, see Receive a fax manually on page 32.
●If you have a voice mail service at the same phone number you use for fax calls, you must receive faxes
manually, not automatically. This means that you must be available to respond in person to incoming
fax calls. Learn more about setting up the printer when you have a voice mail service, click here to go
online for more information. For information on receiving faxes manually, see Receive a fax manually
on page 32.
●If you have a computer dial-up modem on the same phone line with the printer, check to make sure that
the software that came with your modem is not set to receive faxes automatically. Modems that are set
up to receive faxes automatically take over the phone line to receive all incoming faxes, which prevents
the printer from receiving fax calls.
●If you have an answering machine on the same phone line with the printer, you might have one of the
following problems:
◦Your answering machine might not be set up correctly with the printer.
◦Your outgoing message might be too long or too loud to allow the printer to detect fax tones, and
the sending fax machine might disconnect.
◦Your answering machine might not have enough quiet time after your outgoing message to allow
the printer to detect fax tones. This problem is most common with digital answering machines.
The following actions might help solve these problems:
◦When you have an answering machine on the same phone line you use for fax calls, try connecting
the answering machine directly to the printer, click here to go online for more information.
◦Make sure the printer is set to receive faxes automatically. For information on setting up the
printer to receive faxes automatically, see Receive a fax on page 32.
◦Make sure the Rings to Answer setting is set to a greater number of rings than the answering
machine. For more information, see Set the number of rings before answering on page 39.
84 Chapter 9 Solve a problem ENWW
◦Disconnect the answering machine and then try receiving a fax. If faxing is successful without the
answering machine, the answering machine might be causing the problem.
◦Reconnect the answering machine and record your outgoing message again. Record a message
that is approximately 10 seconds in duration. Speak slowly and at a low volume when recording
your message. Leave at least 5 seconds of silence at the end of the voice message. There should
be no background noise when recording this silent time. Try to receive a fax again.
NOTE: Some digital answering machines might not retain the recorded silence at the end of your
outgoing message. Play back your outgoing message to check.
●If the printer shares the same phone line with other types of phone equipment, such as an answering
machine, a computer dial-up modem, or a multi-port switch box, the fax signal level might be reduced.
The signal level can also be reduced if you use a splitter or connect extra cables to extend the length of
your phone. A reduced fax signal can cause problems during fax reception.
To find out if other equipment is causing a problem, disconnect everything except the printer from the
phone line, and then try to receive a fax. If you can receive faxes successfully without the other
equipment, one or more pieces of the other equipment is causing problems; try adding them back one
at a time and receiving a fax each time, until you identify which equipment is causing the problem.
●If you have a special ring pattern for your fax phone number (using a distinctive ring service through
your telephone company), make sure that the Distinctive Ring feature on the printer is set to match.
For more information, see Change the answer ring pattern for distinctive ring on page 39.
The printer cannot send faxes, but can receive faxes
●The printer might be dialing too fast or too soon. You might need to insert some pauses in the number
sequence. For example, if you need to access an outside line before dialing the phone number, insert
a pause following the access number. If your number is 95555555, and 9 accesses an outside line, you
might insert pauses as follows: 9-555-5555. To enter a pause in the fax number you are typing, touch
the * repeatedly, until a dash (-) appears on the display.
You can also send the fax using monitor dialing. This enables you to listen to the phone line as you dial.
You can set the pace of your dialing and respond to prompts as you dial. For more information, see Send
a fax using monitor dialing on page 30.
●The number you entered when sending the fax is not in the proper format or the receiving fax machine
is having problems. To check this, try calling the fax number from a telephone and listen for fax tones. If
you cannot hear fax tones, the receiving fax machine might not be turned on or connected, or a voice
mail service could be interfering with the recipient's phone line. You can also ask the recipient to check
the receiving fax machine for any problems.
Fax tones are recorded on my answering machine
●When you have an answering machine on the same phone line you use for fax calls, try connecting the
answering machine directly to the printer, click here to go online for more information. If you do not
connect the answering machine as recommended, fax tones might be recorded on your answering
machine.
●Make sure the printer is set to receive faxes automatically and that the Rings to Answer setting is
correct. The number of rings to answer for the printer should be greater than the number of rings to
answer for the answering machine. If the answering machine and the printer are set to the same
number of rings to answer, both devices answer the call and fax tones are recorded on the answering
machine.
●Set your answering machine to a low number of rings and the printer to answer in the maximum number
of rings supported. (The maximum number of rings varies by country/region.) In this setup, the
ENWW Fax issues 85
answering machine answers the call and the printer monitors the line. If the printer detects fax tones,
the printer receives the fax. If the call is a voice call, the answering machine records the incoming
message. For more information, see Set the number of rings before answering on page 39.
Network and connection issues
What do you want to do?
Fix wireless connection
Choose one of the following troubleshooting options.
HP Print and Scan Doctor The HP Print and Scan Doctor is a utility that will try to diagnose and fix the issue automatically.
Use an HP online
troubleshooting wizard
●Troubleshoot your wireless problem, whether your printer has never been connected or it was
connected and is no longer working.
●Troubleshoot a firewall or antivirus issue, if you suspect that it is preventing your computer
from connecting to the printer.
NOTE: The HP Print and Scan Doctor and the HP online troubleshooting wizards may not be available in all
languages.
Read general instructions in the Help for wireless troubleshooting
Check the network configuration or print the wireless test report to assist in diagnosing network connection
issues.
1. From the printer control panel, touch ( Wireless ), and then touch ( Settings ).
2. Touch Print Reports. and then touch Network Configuration Page or Wireless Test Report.
Find network settings for wireless connection
Choose one of the following troubleshooting options.
HP Print and Scan Doctor The HP Print and Scan Doctor is a utility that can tell you the network name (SSID) and
password (network key).
Use an HP online troubleshooting wizard Learn how to find your network name (SSID) and wireless password.
NOTE: The HP Print and Scan Doctor and the HP online troubleshooting wizards may not be available in all
languages.
Fix Wi-Fi Direct connection
Use an HP online troubleshooting wizard Troubleshoot your Wi-Fi Direct problem or learn how to configure Wi-Fi Direct.
NOTE: The HP online troubleshooting wizards may not be available in all languages.
86 Chapter 9 Solve a problem ENWW
Read general instructions in the Help for Wi-Fi Direct troubleshooting
1. Check the printer to confirm that Wi-Fi Direct is turned on:
a. From the printer control panel, touch (Wi-Fi Direct).
b. If Status is Off, touch (Wi-Fi Direct Settings) and turn Wi-Fi Direct on.
2. From your wireless computer or mobile device, turn on the Wi-Fi connection, and then search for and
connect to the Wi-Fi Direct name of your printer.
3. Enter the Wi-Fi Direct password when prompted.
4. If you are using a mobile device, make sure you have installed a compatible printing app. For more
information about mobile printing, visit www.hp.com/global/us/en/eprint/mobile_printing_apps.html.
Printer hardware issues
TIP: Run the HP Print and Scan Doctor to diagnose and automatically fix printing, scanning, and copying
issues. The application is only available in some languages.
The printer shuts down unexpectedly
●Check the power and power connections.
●Make sure the printer's power cord is connected firmly to a functioning power outlet.
The cartridge access door is open
●Close the cartridge access door to begin printing.
Cartridges alignment fails
●If the alignment process fails, make sure you have loaded unused, plain white paper into the input tray.
If you have colored paper loaded in the input tray when you align the ink cartridges, the alignment fails.
●If the alignment process fails repeatedly, you may need to clean the printhead, or you might have a
defective sensor.
●If cleaning the printhead does not solve the problem, contact HP support. Go to www.hp.com/support .
This website provides information and utilities that can help you correct many common printer
problems. If prompted, select your country/region, and then click All HP Contacts for information on
calling for technical support.
Resolve printer failure
▲Turn the printer off, then on. If that does not resolve the problem, contact HP.
For more information about contacting HP support, see HP support on page 88.
ENWW Printer hardware issues 87
HP support
For the latest product updates and support information, visit the HP OfficeJet 4650 series support website at
www.hp.com/support. HP online support provides a variety of options for help with your printer:
Drivers & downloads: Download software drivers and updates, as well as product manuals and documentation
that came in the box with your printer.
HP support forums: Visit HP Support Forums for answers to common questions and issues. You can view
questions posted by other HP customers, or sign in and post your own questions and comments.
Troubleshooting: Use HP online tools to detect your printer and find recommended solutions.
Contact HP
If you need help from an HP technical support representative to solve a problem, visit the Contact Support
website. The following contact options are available at no cost for in-warranty customers (HP agent-assisted
support for out-of warranty customers may require a fee):
Chat with an HP support agent online.
Call an HP support agent.
When contacting HP support, be prepared to provide the following information:
●Product name (Located on the printer, such as HP OfficeJet 4650)
●Product number (located inside the cartridge access door)
●Serial number (located on the back or bottom of the printer)
Register printer
By taking just a few quick minutes to register, you can enjoy quicker service, more efficient support, and
product support alerts. If you did not register your printer while installing the software, you can register now
at http://www.register.hp.com.
88 Chapter 9 Solve a problem ENWW
A Technical information
The technical specifications and international regulatory information for the HP OfficeJet 4650 series are
provided in this section.
For additional specifications, see the printed documentation that came with the HP OfficeJet 4650 series.
This section contains the following topics:
●Hewlett-Packard Company notices
●Specifications
●Environmental product stewardship program
●Regulatory information
Hewlett-Packard Company notices
The information contained herein is subject to change without notice.
All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior
written permission of Hewlett-Packard, except as allowed under the copyright laws. The only warranties for
HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
© 2015 Hewlett-Packard Development Company, L.P.
Microsoft®, Windows ®, Windows® XP, Windows Vista®, Windows® 7, Windows® 8, and Windows® 8.1 are U.S.
registered trademarks of Microsoft Corporation.
Specifications
Technical specifications for the HP OfficeJet 4650 series are provided in this section. For more product
specifications, see the Product Data Sheet at www.hp.com/support .
●System requirements
●Environmental specifications
●Print specifications
●Scan specifications
●Copy specifications
●Cartridge yield
●Print resolution
●Acoustic information
System requirements
Software and system requirements are located in the Readme file.
90 Appendix A Technical information ENWW
For information about future operating system releases and support, visit the HP online support website at
www.hp.com/support .
Environmental specifications
●Recommended operating temperature range: 15ºC to 32ºC (59ºF to 90ºF)
●Allowable operating temperature range: 5ºC to 40ºC (41ºF to 104ºF)
●Humidity: 20% to 80% RH non-condensing (recommended); 25ºC maximum dewpoint
●Non-operating (Storage) temperature range: –40ºC to 60ºC (-40ºF to 140ºF)
●In the presence of high electromagnetic fields, it is possible the output from the HP OfficeJet 4650
series may be slightly distorted.
●HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize injected
noise due to potential high electromagnetic fields.
Print specifications
●Print speeds vary according to the complexity of the document.
●Method: drop-on-demand thermal inkjet
●Language: PCL3 GUI
Scan specifications
●Optical Resolution: up to 1200 dpi
●Hardware Resolution: up to 1200 x 1200 dpi
●Enhanced Resolution: up to 1200 x 1200 dpi
●Bitdepth: 24-bit color, 8-bit grayscale (256 levels of gray)
●Maximum scan size from glass: 21.6 x 29.7 cm (8.5 x 11.7 inches)
●Supported File Types: BMP, JPEG, PNG, TIFF, PDF
●Twain Version: 1.9
Copy specifications
●Digital image processing
●Maximum number of copies varies by model.
●Copy speeds vary according to the complexity of the document and model.
Cartridge yield
Visit www.hp.com/go/learnaboutsupplies for more information on estimated cartridge yields.
Print resolution
For a list of supported print resolutions, visit the HP OfficeJet 4650 series support website at www.hp.com/
support.
For information about printing using maximum dpi, see Print using the maximum dpi on page 18.
ENWW Specifications 91
Acoustic information
If you have Internet access, you can access acoustic information from the HP website.
Environmental product stewardship program
Hewlett-Packard is committed to providing quality products in an environmentally sound manner. Design for
recycling has been incorporated into this product. The number of materials has been kept to a minimum
while ensuring proper functionality and reliability. Dissimilar materials have been designed to separate
easily. Fasteners and other connections are easy to locate, access, and remove using common tools. High
priority parts are designed for efficient disassembly and repair.
For more information, visit HP’s Commitment to the Environment website at:
www.hp.com/hpinfo/globalcitizenship/environment/index.html.
This section contains the following topics:
●Eco-Tips
●Paper use
●Plastics
●Material safety data sheets
●HP inkjet supplies recycling program
●Power consumption
●Disposal of waste equipment by users
●Chemical substances
●Battery disposal in Taiwan
●Battery notice for Brazil
●California Perchlorate Material Notice
●EPEAT
●European Union Commission Regulation 1275/2008
●The Table of Hazardous Substances/Elements and their Content (China)
●Restriction of hazardous substance (Ukraine)
●Restriction of hazardous substance (India)
●China Energy Label for Printer, Fax and Copier
Eco-Tips
HP is committed to helping customers reduce their environmental footprint. Please visit the HP
Environmental Programs and Initiatives website for more information on HP’s environmental initiatives.
www.hp.com/hpinfo/globalcitizenship/environment/
Paper use
This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002.
92 Appendix A Technical information ENWW
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the ability to
identify plastics for recycling purposes at the end of product life.
Material safety data sheets
Material safety data sheets (MSDS) can be obtained from the HP website at:
www.hp.com/go/msds
HP inkjet supplies recycling program
HP is committed to protecting the environment. The HP Inkjet Supplies Recycling Program is available in
many countries/regions, and lets you recycle used print cartridges and ink cartridges free of charge. For more
information, go to the following website:
www.hp.com/hpinfo/globalcitizenship/environment/recycle/
Power consumption
Hewlett-Packard printing and imaging equipment marked with the ENERGY STAR® logo is certified by the U.S.
Environmental Protection Agency. The following mark will appear on ENERGY STAR certified imaging
products:
Additional ENERGY STAR certified imaging product model information is listed at: www.hp.com/go/
energystar
Disposal of waste equipment by users
This symbol means do not dispose of your product with your other household waste. Instead,
you should protect human health and the environment by handing over your waste
equipment to a designated collection point for the recycling of waste electrical and electronic
equipment. For more information, please contact your household waste disposal service, or
go to http://www.hp.com/recycle.
Chemical substances
HP is committed to providing our customers with information about the chemical substances in our products
as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European
Parliament and the Council). A chemical information report for this product can be found at: www.hp.com/go/
reach.
ENWW Environmental product stewardship program 93
Battery disposal in Taiwan
Battery notice for Brazil
California Perchlorate Material Notice
EPEAT
European Union Commission Regulation 1275/2008
For product power data, including the power consumption of the product in networked standby if all wired
network ports are connected and all wireless network ports are activated, please refer to section P14
‘Additional Information’ of the product IT ECO Declaration at www.hp.com/hpinfo/globalcitizenship/
environment/productdata/itecodesktop-pc.html.
94 Appendix A Technical information ENWW
The Table of Hazardous Substances/Elements and their Content (China)
Restriction of hazardous substance (Ukraine)
Restriction of hazardous substance (India)
ENWW Environmental product stewardship program 95
China Energy Label for Printer, Fax and Copier
Regulatory information
The printer meets product requirements from regulatory agencies in your country/region.
This section contains the following topics:
●Regulatory model identification number
●FCC statement
●Notice to users in Korea
●VCCI (Class B) compliance statement for users in Japan
●Notice to users in Japan about the power cord
96 Appendix A Technical information ENWW
●Noise emission statement for Germany
●GS Statement (Germany)
●Declaration of conformity
●European Union Regulatory Notice
—Products with wireless functionality
—European telephone network declaration (Modem/Fax)
●Australia wired fax statement
●Notice to users of the U.S. telephone network: FCC requirements
●Notice to users of the Canadian telephone network
●Notice to users of the German telephone network
●Regulatory information for wireless products
—Exposure to radio frequency radiation
—Notice to users in Brazil
—Notice to users in Canada
—Notice to users in Taiwan
—Notice to users in Mexico
—Notice to users in Japan
—Notice to users in Korea
Regulatory model identification number
For regulatory identification purposes, your product is assigned a Regulatory Model Number. The Regulatory
Model Number for your product is SDGOB-1502. This regulatory number should not be confused with the
marketing name (HP OfficeJet 4650 All-in-One series, etc.) or product numbers (F1H96 to F1J07, etc.).
ENWW Regulatory information 97
FCC statement
Notice to users in Korea
VCCI (Class B) compliance statement for users in Japan
98 Appendix A Technical information ENWW
Notice to users in Japan about the power cord
Noise emission statement for Germany
GS Statement (Germany)
ENWW Regulatory information 99
Declaration of conformity
100 Appendix A Technical information ENWW
European Union Regulatory Notice
Products bearing the CE marking comply with one or more of the following EU Directives as may be
applicable: Low Voltage Directive 2006/95/EC, EMC Directive 2004/108/EC, Ecodesign Directive 2009/125/
EC, R&TTE Directive 1999/5/EC, RoHS Directive 2011/65/EU. Compliance with these directives is assessed
using applicable European Harmonised Standards. The full Declaration of Conformity can be found at the
following website: www.hp.com/go/certificates (Search with the product model name or its Regulatory
Model Number (RMN), which may be found on the regulatory label.)
The point of contact for regulatory matters is:
Hewlett-Packard GmbH, Dept./MS: HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, GERMANY
Products with wireless functionality
EMF
●This product meets international guidelines (ICNIRP) for exposure to radio frequency radiation.
If it incorporates a radio transmitting and receiving device that in normal use, a separation distance of
20 cm ensures that radio frequency exposure levels comply with EU requirements.
Wireless functionality in Europe
●This product is designed for use without restrictions in all EU countries plus Iceland, Liechtenstein,
Norway and Switzerland.
European telephone network declaration (Modem/Fax)
HP products with FAX capability comply with the requirements of the R&TTE Directive 1999/5/EC (Annex II)
and carry the CE marking accordingly. However, due to differences between the individual PSTNs provided in
different countries/regions, the approval does not, of itself, give an unconditional assurance of successful
operation on every PSTN network termination point. In the event of problems, you should contact your
equipment supplier in the first instance.
Australia wired fax statement
ENWW Regulatory information 101
Notice to users of the U.S. telephone network: FCC requirements
102 Appendix A Technical information ENWW
Notice to users of the Canadian telephone network
Notice to users of the German telephone network
Regulatory information for wireless products
This section contains the following regulatory information pertaining to wireless products:
●Exposure to radio frequency radiation
●Notice to users in Brazil
●Notice to users in Canada
●Notice to users in Taiwan
ENWW Regulatory information 103
Notice to users in Canada
Notice to users in Taiwan
ENWW Regulatory information 105
Notice to users in Mexico
Notice to users in Japan
Notice to users in Korea
106 Appendix A Technical information ENWW
B Additional fax setup
In this section, you learn how to set up the printer so that faxing works successfully with equipment and
services you might already have on the same phone line.
TIP: You can also use the Fax Setup Wizard (Windows) or HP Setup Assistant (Mac OS X) to help you quickly
set up some important fax settings such as the answer mode and fax header information. You can access
these tools through the HP software you installed with the printer. After you run these tools, follow the
procedures in this section to complete your fax setup.
This section contains the following topics:
●Set up faxing (parallel phone systems)
●Serial-type fax setup
●Test fax setup
Set up faxing (parallel phone systems)
Before you begin setting up the printer for faxing, determine which kind of phone system your country/
region uses. The instructions for fax setup differ depending on whether you have a serial- or parallel-type
phone system.
Table B-1 Countries/regions with a parallel-type phone system
Argentina Australia Brazil
Canada Chile China
Colombia Greece India
Indonesia Ireland Japan
Korea Latin America Malaysia
Mexico Philippines Poland
Portugal Russia Saudi Arabia
Singapore Spain Taiwan
Thailand USA Venezuela
Vietnam
●If you do not see your country/region listed, you probably have a serial-type phone system. In a serial-
type phone system, the connector type on your shared telephone equipment (modems, phones, and
answering machines) does not allow a physical connection to the "2-EXT" port on the printer. Instead,
all equipment must be connected at the telephone wall jack.
ENWW Set up faxing (parallel phone systems) 107
NOTE: In some countries/regions that use serial-type phone systems, the phone cord that came with
the printer might have an additional wall plug attached to it. This enables you to connect other telecom
devices to the wall jack where you plug in the printer.
You might need to connect the supplied phone cord to the adapter provided for your country/region.
●If your country/region is listed, you probably have a parallel-type telephone system. In a parallel-type
phone system, you are able to connect shared telephone equipment to the phone line by using the "2-
EXT" port on the back of the printer.
NOTE: If you have a parallel-type phone system, HP recommends you use the 2-wire phone cord
supplied with the printer to connect it to the telephone wall jack.
If you are unsure which kind of telephone system you have (serial or parallel), check with your telephone
company.
This section contains the following topics:
●Select the correct fax setup for your home or office
●Case A: Separate fax line (no voice calls received)
●Case B: Set up the printer with DSL
●Case C: Set up the printer with a PBX phone system or an ISDN line
●Case D: Fax with a distinctive ring service on the same line
●Case E: Shared voice/fax line
●Case F: Shared voice/fax line with voice mail
●Case G: Fax line shared with computer modem (no voice calls received)
●Case H: Shared voice/fax line with computer modem
●Case I: Shared voice/fax line with answering machine
●Case J: Shared voice/fax line with computer modem and answering machine
●Case K: Shared voice/fax line with computer dial-up modem and voice mail
Select the correct fax setup for your home or office
To fax successfully, you need to know what types of equipment and services (if any) share the same phone
line with the printer. This is important because you might need to connect some of your existing office
equipment directly to the printer, and you might also need to change some fax settings before you can fax
successfully.
1. Determine if your telephone system is serial or parallel. See Set up faxing (parallel phone systems)
on page 107.
a. Serial-type telephone system—See Serial-type fax setup on page 128.
b. Parallel-type telephone system—Go to step 2.
2. Select the combination of equipment and services sharing your fax line.
●DSL: A Digital subscriber line (DSL) service through your telephone company. (DSL might be called
ADSL in your country/region.)
●PBX: A private branch exchange (PBX) phone system or an integrated services digital network
(ISDN) system.
108 Appendix B Additional fax setup ENWW
●Distinctive ring service: A distinctive ring service through your telephone company provides
multiple telephone numbers with different ring patterns.
●Voice calls: Voice calls are received at the same phone number you use for fax calls on the printer.
●Computer dial-up modem: A computer dial-up modem is on the same phone line as the printer. If
you answer Yes to any of the following questions, you are using a computer dial-up modem:
◦Do you send and receive faxes directly to and from your computer software applications
through a dial-up connection?
◦Do you send and receive email messages on your computer through a dial-up connection?
◦Do you access the Internet from your computer through a dial-up connection?
●Answering machine: An answering machine that answers voice calls at the same phone number
you use for fax calls on the printer.
●Voice mail service: A voice mail subscription through your telephone company at the same number
you use for fax calls on the printer.
3. From the following table, select the combination of equipment and services applicable to your home or
office setting. Then look up the recommended fax setup. Step-by-step instructions are included for
each case in the sections that follow.
NOTE: If your home or office setup is not described in this section, set up the printer as you would a regular
analog phone. Make sure you use the phone cord supplied in the box to connect one end to your telephone
wall jack and the other end to the port labeled 1-LINE on the back of the printer. If you use another phone
cord, you might experience problems sending and receiving faxes.
You might need to connect the supplied phone cord to the adapter provided for your country/region.
Other equipment or services sharing your fax line Recommended fax setup
DSL PBX Distinctive
ring service
Voice
calls
Computer dail-
up modem
Answering
machine
Voice mail
service
Case A: Separate fax line (no
voice calls received)
on page 110
Case B: Set up the printer with
DSL on page 111
Case C: Set up the printer with
a PBX phone system or an
ISDN line on page 112
Case D: Fax with a distinctive
ring service on the same line
on page 112
Case E: Shared voice/fax line
on page 113
Case F: Shared voice/fax line
with voice mail on page 115
Case G: Fax line shared with
computer modem (no voice
calls received) on page 116
Case H: Shared voice/fax line
with computer modem
on page 118
ENWW Set up faxing (parallel phone systems) 109
Other equipment or services sharing your fax line Recommended fax setup
DSL PBX Distinctive
ring service
Voice
calls
Computer dail-
up modem
Answering
machine
Voice mail
service
Case I: Shared voice/fax line
with answering machine
on page 121
Case J: Shared voice/fax line
with computer modem and
answering machine
on page 122
Case K: Shared voice/fax line
with computer dial-up modem
and voice mail on page 126
Case A: Separate fax line (no voice calls received)
If you have a separate phone line on which you receive no voice calls, and you have no other equipment
connected on this phone line, set up the printer as described in this section.
Figure B-1 Back view of the printer
1 Telephone wall jack.
2 Use the phone cord supplied in the box with the printer to connect to the 1-LINE port.
You might need to connect the supplied phone cord to the adapter provided for your country/region.
To set up the printer with a separate fax line
1. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack,
then connect the other end to the port labeled 1-LINE on the back of the printer.
NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/
region.
If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not
be able to fax successfully. This special phone cord is different from the phone cords you might already
have in your home or office.
2. Turn on the Auto Answer setting.
110 Appendix B Additional fax setup ENWW
3. (Optional) Change the Rings to Answer setting to the lowest setting (two rings).
4. Run a fax test.
When the phone rings, the printer answers automatically after the number of rings you set in the Rings to
Answer setting. The printer begins emitting fax reception tones to the sending fax machine and receives the
fax.
Case B: Set up the printer with DSL
If you have a DSL service through your telephone company, and do not connect any equipment to the printer,
use the instructions in this section to connect a DSL filter between the telephone wall jack and the printer.
The DSL filter removes the digital signal that can interfere with the printer, so the printer can communicate
correctly with the phone line. (DSL might be called ADSL in your country/region.)
NOTE: If you have a DSL line and you do not connect the DSL filter, you cannot send and receive faxes with
the printer.
Figure B-2 Back view of the printer
1 Telephone wall jack.
2 DSL (or ADSL) filter and cord supplied by your DSL provider.
3 Use the phone cord supplied in the box with the printer to connect to the 1-LINE port.
You might need to connect the supplied phone cord to the adapter provided for your country/region.
To set up the printer with DSL
1. Obtain a DSL filter from your DSL provider.
2. Using the phone cord supplied in the box with the printer, connect one end to the open port on the DSL
filter, and then connect the other end to the port labeled 1-LINE on the back of the printer.
NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/
region.
If you do not use the supplied cord to connect from the DSL filter to the printer, you might not be able to
fax successfully. This special phone cord is different from the phone cords you might already have in
your home or office.
As only one phone cord is supplied, you might need to obtain additional phone cords for this setup.
ENWW Set up faxing (parallel phone systems) 111
3. Connect an additional phone cord from the DSL filter to the telephone wall jack.
4. Run a fax test.
If you encounter problems setting up the printer with optional equipment, contact your local service provider
or vendor for further assistance.
Case C: Set up the printer with a PBX phone system or an ISDN line
If you are using either a PBX phone system or an ISDN converter/terminal adapter, make sure you do the
following:
●If you are using either a PBX or an ISDN converter/terminal adaptor, connect the printer to the port that
is designated for fax and phone use. Also, make sure that the terminal adapter is set to the correct
switch type for your country/region, if possible.
NOTE: Some ISDN systems allow you to configure the ports for specific phone equipment. For
example, you might have assigned one port for telephone and Group 3 fax and another port for multiple
purposes. If you have problems when connected to the fax/phone port of your ISDN converter, try using
the port designated for multiple purposes; it might be labeled "multi-combi" or something similar.
●If you are using a PBX phone system, set the call waiting tone to "off."
NOTE: Many digital PBX systems include a call-waiting tone that is set to "on" by default. The call-
waiting tone interferes with any fax transmission, and you cannot send or receive faxes with the printer.
Refer to the documentation that came with your PBX phone system for instructions on how to turn off
the call-waiting tone.
●If you are using a PBX phone system, dial the number for an outside line before dialing the fax number.
●Make sure you use the supplied cord to connect from the telephone wall jack to the printer. If you do
not, you might not be able to fax successfully. This special phone cord is different from the phone cords
you might already have in your home or office. If the supplied phone cord is too short, you can purchase
a coupler from your local electronics store and extend it.
You might need to connect the supplied phone cord to the adapter provided for your country/region.
If you encounter problems setting up the printer with optional equipment, contact your local service provider
or vendor for further assistance.
Case D: Fax with a distinctive ring service on the same line
If you subscribe to a distinctive ring service (through your telephone company) that allows you to have
multiple phone numbers on one phone line, each with a different ring pattern, set up the printer as described
in this section.
Figure B-3 Back view of the printer
112 Appendix B Additional fax setup ENWW
1 Telephone wall jack.
2 Use the phone cord supplied in the box with the printer to connect to the 1-LINE port.
You might need to connect the supplied phone cord to the adapter provided for your country/region.
To set up the printer with a distinctive ring service
1. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack,
then connect the other end to the port labeled 1-LINE on the back of the printer.
NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/
region.
If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not
be able to fax successfully. This special phone cord is different from the phone cords you might already
have in your home or office.
2. Turn on the Auto Answer setting.
3. Change the Distinctive Ring setting to match the pattern that the telephone company assigned to your
fax number.
NOTE: By default, the printer is set to answer all ring patterns. If you do not set the Distinctive Ring
to match the ring pattern assigned to your fax number, the printer might answer both voice calls and
fax calls or it might not answer at all.
TIP: You can also use the Ring Pattern Detection feature in the printer’s control panel to set
distinctive ring. With this feature, the printer recognizes and records the ring pattern of an incoming call
and, based on this call, automatically determines the distinctive ring pattern assigned by your
telephone company to fax calls. For more information, see Change the answer ring pattern for
distinctive ring on page 39.
4. (Optional) Change the Rings to Answer setting to the lowest setting (two rings).
5. Run a fax test.
The printer automatically answers incoming calls that have the ring pattern you selected ( Distinctive Ring
setting) after the number of rings you selected ( Rings to Answer setting). The printer begins emitting fax
reception tones to the sending fax machine and receives the fax.
If you encounter problems setting up the printer with optional equipment, contact your local service provider
or vendor for further assistance.
Case E: Shared voice/fax line
If you receive both voice calls and fax calls at the same phone number, and you have no other office
equipment (or voice mail) on this phone line, set up the printer as described in this section.
ENWW Set up faxing (parallel phone systems) 113
Figure B-4 Back view of the printer
1 Telephone wall jack.
2 Use the phone cord supplied in the box with the printer to connect to the 1-LINE port.
You might need to connect the supplied phone cord to the adapter provided for your country/region.
3 Telephone (optional)
To set up the printer with a shared voice/fax line
1. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack,
then connect the other end to the port labeled 1-LINE on the back of the printer.
NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/
region.
If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not
be able to fax successfully. This special phone cord is different from the phone cords you might already
have in your home or office.
2. Do one of the following:
●If you have a parallel-type phone system, remove the white plug from the port labeled 2-EXT on
the back of the printer, and then connect a phone to this port.
●If you have a serial-type phone system, you might plug your phone directly on top of the printer
cable which has a wall plug attached to it.
3. Now you need to decide how you want the printer to answer calls, automatically or manually:
●If you set up the printer to answer calls automatically, it answers all incoming calls and receives
faxes. The printer cannot distinguish between fax and voice calls in this case; if you suspect the
call is a voice call, you need to answer it before the printer answers the call. To set up the printer
to answer calls automatically, turn on the Auto Answer setting.
●If you set up the printer to answer faxes manually, you must be available to respond in person to
incoming fax calls or the printer cannot receive faxes. To set up the printer to answer calls
manually, turn off the Auto Answer setting.
4. Run a fax test.
If you pick up the phone before the printer answers the call and hear fax tones from a sending fax machine,
you need to answer the fax call manually.
114 Appendix B Additional fax setup ENWW
If you encounter problems setting up the printer with optional equipment, contact your local service provider
or vendor for further assistance.
Case F: Shared voice/fax line with voice mail
If you receive both voice calls and fax calls at the same phone number, and you also subscribe to a voice mail
service through your telephone company, set up the printer as described in this section.
NOTE: You cannot receive faxes automatically if you have a voice mail service at the same phone number
you use for fax calls. You must receive faxes manually; this means you must be available to respond in
person to incoming fax calls. If you want to receive faxes automatically instead, contact your telephone
company to subscribe to a distinctive ring service, or to obtain a separate phone line for faxing.
Figure B-5 Back view of the printer
1 Telephone wall jack.
2 Use the phone cord supplied in the box with the printer to connect to the 1-LINE port.
You might need to connect the supplied phone cord to the adapter provided for your country/region.
To set up the printer with voice mail
1. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack,
then connect the other end to the port labeled 1-LINE on the back of the printer.
You might need to connect the supplied phone cord to the adapter provided for your country/region.
NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/
region.
If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not
be able to fax successfully. This special phone cord is different from the phone cords you might already
have in your home or office.
2. Turn off the Auto Answer setting.
3. Run a fax test.
You must be available to respond in person to incoming fax calls, or the printer cannot receive faxes. You
must initiate the manual fax before voicemail picks up the line.
If you encounter problems setting up the printer with optional equipment, contact your local service provider
or vendor for further assistance.
ENWW Set up faxing (parallel phone systems) 115
Case G: Fax line shared with computer modem (no voice calls received)
If you have a fax line on which you receive no voice calls, and you also have a computer modem connected on
this line, set up the printer as described in this section.
NOTE: If you have a computer dial-up modem, your computer dial-up modem shares the phone line with
the printer. You cannot use both your modem and the printer simultaneously. For example, you cannot use
the printer for faxing while you are using your computer dial-up modem to send an email or access the
Internet.
●Set up the printer with a computer dial-up modem
●Set up the printer with a computer DSL/ADSL modem
Set up the printer with a computer dial-up modem
If you are using the same phone line for sending faxes and for a computer dial-up modem, follow these
directions for setting up the printer.
Figure B-6 Back view of the printer
1 Telephone wall jack.
2 Use the phone cord supplied in the box with the printer to connect to the 1-LINE port.
You might need to connect the supplied phone cord to the adapter provided for your country/region.
3 Computer with modem
To set up the printer with a computer dial-up modem
1. Remove the white plug from the port labeled 2-EXT on the back of the printer.
2. Find the phone cord that connects from the back of your computer (your computer dial-up modem) to
a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port labeled
2-EXT on the back of the printer.
3. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack,
then connect the other end to the port labeled 1-LINE on the back of the printer.
NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/
region.
If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not
be able to fax successfully. This special phone cord is different from the phone cords you might already
have in your home or office.
116 Appendix B Additional fax setup ENWW
4. If your modem software is set to receive faxes to your computer automatically, turn off that setting.
NOTE: If you do not turn off the automatic fax reception setting in your modem software, the printer
cannot receive faxes.
5. Turn on the Auto Answer setting.
6. (Optional) Change the Rings to Answer setting to the lowest setting (two rings).
7. Run a fax test.
When the phone rings, the printer automatically answers after the number of rings you set in the Rings to
Answer setting. The printer begins emitting fax reception tones to the sending fax machine and receives the
fax.
If you encounter problems setting up the printer with optional equipment, contact your local service provider
or vendor for further assistance.
Set up the printer with a computer DSL/ADSL modem
If you have a DSL line and use that phone line to send faxes, follow these instructions to set up your fax.
1 Telephone wall jack.
2 Parallel splitter.
3DSL/ADSL filter.
Connect one end of the phone jack that was supplied with the printer to connect to the 1-LINE port
on the back of the printer. Connect the other end of the cord to the DSL/ADSL filter.
You might need to connect the supplied phone cord to the adapter provided for your country/region.
4 Computer DSL/ADSL modem.
5 Computer.
NOTE: You need to purchase a parallel splitter. A parallel splitter has one RJ-11 port on the front and two
RJ-11 ports on the back. Do not use a 2–line phone splitter, a serial splitter, or a parallel splitter which has
two RJ-11 ports on the front and a plug on the back.
Figure B-7 Example of a parallel splitter
ENWW Set up faxing (parallel phone systems) 117
To set up the printer with a computer DSL/ADSL modem
1. Obtain a DSL filter from your DSL provider.
2. Using the phone cord provided in the box with the printer, connect one end to the DSL filter, and then
connect the other end to the port labeled 1-LINE on the back of the printer.
NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/
region.
If you do not use the supplied cord to connect from the DSL filter to the back of the printer, you might
not be able to fax successfully. This special phone cord is different from the phone cords you might
already have in your home or office.
3. Connect the DSL filter to the parallel splitter.
4. Connect the DSL modem to the parallel splitter.
5. Connect the parallel splitter to the wall jack.
6. Run a fax test.
When the phone rings, the printer automatically answers after the number of rings you set in the Rings to
Answer setting. The printer begins emitting fax reception tones to the sending fax machine and receives the
fax.
If you encounter problems setting up the printer with optional equipment, contact your local service provider
or vendor for further assistance.
Case H: Shared voice/fax line with computer modem
There are two different ways to set up the printer with your computer based on the number of phone ports
on your computer. Before you begin, check your computer to see if it has one or two phone ports.
NOTE: If your computer has only one phone port, you need to purchase a parallel splitter (also called
a coupler), as shown in the illustration. (A parallel splitter has one RJ-11 port on the front and two RJ-11
ports on the back. Do not use a two-line phone splitter, a serial splitter, or a parallel splitter which has two
RJ-11 ports on the front and a plug on the back.)
●Shared voice/fax with computer dial-up modem
●Shared voice/fax with computer DSL/ADSL modem
Shared voice/fax with computer dial-up modem
If you use your phone line for both fax and telephone calls, use these instructions to set up your fax.
There are two different ways to set up the printer with your computer based on the number of phone ports
on your computer. Before you begin, check your computer to see if it has one or two phone ports.
NOTE: If your computer has only one phone port, you need to purchase a parallel splitter (also called
a coupler), as shown in the illustration. (A parallel splitter has one RJ-11 port on the front and two RJ-11
ports on the back. Do not use a two-line phone splitter, a serial splitter, or a parallel splitter which has two
RJ-11 ports on the front and a plug on the back.)
Figure B-8 Example of a parallel splitter
118 Appendix B Additional fax setup ENWW
Figure B-9 Back view of the printer
1 Telephone wall jack.
2 Parallel splitter.
3 Use the phone cord supplied in the box with the printer to connect to the 1-LINE port.
4 Computer with modem.
5 Telephone.
To set up the printer on the same phone line as a computer with two phone ports
1. Remove the white plug from the port labeled 2-EXT on the back of the printer.
2. Find the phone cord that connects from the back of your computer (your computer dial-up modem) to
a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port labeled
2-EXT on the back of the printer.
3. Connect a phone to the "OUT" port on the back of your computer dial-up modem.
4. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack,
then connect the other end to the port labeled 1-LINE on the back of the printer.
NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/
region.
If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not
be able to fax successfully. This special phone cord is different from the phone cords you might already
have in your home or office.
5. If your modem software is set to receive faxes to your computer automatically, turn off that setting.
NOTE: If you do not turn off the automatic fax reception setting in your modem software, the printer
cannot receive faxes.
6. Now you need to decide how you want the printer to answer calls, automatically or manually:
●If you set up the printer to answer calls automatically, it answers all incoming calls and receives
faxes. The printer cannot distinguish between fax and voice calls in this case; if you suspect the
ENWW Set up faxing (parallel phone systems) 119
call is a voice call, you need to answer it before the printer answers the call. To set up the printer
to answer calls automatically, turn on the Auto Answer setting.
●If you set up the printer to answer faxes manually, you must be available to respond in person to
incoming fax calls or the printer cannot receive faxes. To set up the printer to answer calls
manually, turn off the Auto Answer setting.
7. Run a fax test.
If you pick up the phone before the printer answers the call and hear fax tones from a sending fax machine,
you need to answer the fax call manually.
If you use your phone line for voice, fax, and your computer dial-up modem, follow these directions to set up
your fax.
If you encounter problems setting up the printer with optional equipment, contact your local service provider
or vendor for further assistance.
Shared voice/fax with computer DSL/ADSL modem
Use these instructions if your computer has a DSL/ADSL modem
Figure B-10 Back view of the printer
1 Telephone wall jack.
2 Parallel splitter.
3DSL/ADSL filter.
4 Telephone.
5 Computer DSL/ADSL modem.
6 Computer.
7 Use the phone cord provided to connect to the 1-LINE port on the back of the printer.
You might need to connect the supplied phone cord to the adapter provided for your country/region.
NOTE: You need to purchase a parallel splitter. A parallel splitter has one RJ-11 port on the front and two
RJ-11 ports on the back. Do not use a 2–line phone splitter, a serial splitter, or a parallel splitter which has
two RJ-11 ports on the front and a plug on the back.
120 Appendix B Additional fax setup ENWW
Figure B-11 Example of a parallel splitter
To set up the printer with a computer DSL/ADSL modem
1. Obtain a DSL filter from your DSL provider.
NOTE: Phones in other parts of the home/office sharing the same phone number with DSL service
need to be connected to additional DSL filters to avoid noise when making voice calls.
2. Using the phone cord supplied in the box with the printers, connect one end to the DSL filter, then
connect the other end to the port labeled 1-LINE on the back of the printer.
NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/
region.
If you do not use the supplied cord to connect from the DSL filter to the back of the printer, you might
not be able to fax successfully. This special phone cord is different from the phone cords you might
already have in your home or office.
3. If you have a parallel-type phone system, remove the white plug from the port labeled 2-EXT on the
back of the printer, and then connect a phone to this port.
4. Connect the DSL filter to the parallel splitter.
5. Connect the DSL modem to the parallel splitter.
6. Connect the parallel splitter to the wall jack.
7. Run a fax test.
When the phone rings, the printer automatically answers after the number of rings you set in the Rings to
Answer setting. The printer begins emitting fax reception tones to the sending fax machine and receives the
fax.
If you encounter problems setting up the printer with optional equipment, contact your local service provider
or vendor for further assistance.
Case I: Shared voice/fax line with answering machine
If you receive both voice calls and fax calls at the same phone number, and you also have an answering
machine that answers voice calls at this phone number, set up the printer as described in this section.
Figure B-12 Back view of the printer
1 Telephone wall jack.
ENWW Set up faxing (parallel phone systems) 121
2 Use the phone cord provided to connect to the 1-LINE port on the back of the printer.
You might need to connect the supplied phone cord to the adapter provided for your country/region.
3Answering machine.
4 Telephone (optional).
To set up the printer with a shared voice/fax line with answering machine
1. Remove the white plug from the port labeled 2-EXT on the back of the printer.
2. Unplug your answering machine from the telephone wall jack, and connect it to the port labeled 2-EXT
on the back of the printer.
NOTE: If you do not connect your answering machine directly to the printer, fax tones from a sending
fax machine might be recorded on your answering machine, and you might not receive faxes with the
printer.
3. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack,
then connect the other end to the port labeled 1-LINE on the back of the printer.
NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/
region.
If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not
be able to fax successfully. This special phone cord is different from the phone cords you might already
have in your home or office.
4. (Optional) If your answering machine does not have a built-in phone, for convenience you might want to
connect a phone to the back of your answering machine at the "OUT" port.
NOTE: If your answering machine does not let you connect an external phone, you can purchase and
use a parallel splitter (also known as a coupler) to connect both the answering machine and telephone
to the printer. You can use standard phone cords for these connections.
5. Turn on the Auto Answer setting.
6. Set your answering machine to answer after a low number of rings.
7. Change the Rings to Answer setting on the printer to the maximum number of rings supported by your
printer. (The maximum number of rings varies by country/region.)
8. Run a fax test.
When the phone rings, your answering machine answers after the number of rings you have set, and then
plays your recorded greeting. The printer monitors the call during this time, "listening" for fax tones. If
incoming fax tones are detected, the printer emits fax reception tones and receives the fax; if there are no
fax tones, the printer stops monitoring the line and your answering machine can record a voice message.
If you encounter problems setting up the printer with optional equipment, contact your local service provider
or vendor for further assistance.
Case J: Shared voice/fax line with computer modem and answering machine
If you receive both voice calls and fax calls at the same phone number, and you also have a computer modem
and answering machine connected on this phone line, set up the printer as described in this section.
122 Appendix B Additional fax setup ENWW
NOTE: Since your computer dial-up modem shares the phone line with the printer, you cannot use both
your modem and the printer simultaneously. For example, you cannot use the printer for faxing while you are
using your computer dial-up modem to send an email or access the Internet.
●Shared voice/fax line with computer dial-up modem and answering machine
●Shared voice/fax line with computer DSL/ADSL modem and answering machine
Shared voice/fax line with computer dial-up modem and answering machine
There are two different ways to set up the printer with your computer based on the number of phone ports
on your computer. Before you begin, check your computer to see if it has one or two phone ports.
NOTE: If your computer has only one phone port, you need to purchase a parallel splitter (also called
a coupler), as shown in the illustration. (A parallel splitter has one RJ-11 port on the front and two RJ-11
ports on the back. Do not use a two-line phone splitter, a serial splitter, or a parallel splitter which has two
RJ-11 ports on the front and a plug on the back.)
Figure B-13 Example of a parallel splitter
Figure B-14 Back view of the printer
1 Telephone wall jack.
2 "IN" phone port on your computer.
3 "OUT" phone port on your computer.
4 Use the phone cord supplied in the box with the printer to connect to the 1-LINE port.
You might need to connect the supplied phone cord to the adapter provided for your country/region.
5 Computer with modem.
6Answering machine.
7 Telephone (optional).
ENWW Set up faxing (parallel phone systems) 123
To set up the printer on the same phone line as a computer with two phone ports
1. Remove the white plug from the port labeled 2-EXT on the back of the printer.
2. Find the phone cord that connects from the back of your computer (your computer dial-up modem) to
a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port labeled
2-EXT on the back of the printer.
3. Unplug your answering machine from the telephone wall jack, and connect it to the port labeled "OUT"
on the back of the computer (the computer dial-up modem).
4. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack,
then connect the other end to the port labeled 1-LINE on the back of the printer.
NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/
region.
If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not
be able to fax successfully. This special phone cord is different from the phone cords you might already
have in your home or office.
5. (Optional) If your answering machine does not have a built-in phone, for convenience you might want to
connect a phone to the back of your answering machine at the "OUT" port.
NOTE: If your answering machine does not let you connect an external phone, you can purchase and
use a parallel splitter (also known as a coupler) to connect both the answering machine and telephone
to the printer. You can use standard phone cords for these connections.
6. If your modem software is set to receive faxes to your computer automatically, turn off that setting.
NOTE: If you do not turn off the automatic fax reception setting in your modem software, the printer
cannot receive faxes.
7. Turn on the Auto Answer setting.
8. Set your answering machine to answer after a low number of rings.
9. Change the Rings to Answer setting on the printer to the maximum number of rings supported by the
product. (The maximum number of rings varies by country/region.)
10. Run a fax test.
When the phone rings, your answering machine answers after the number of rings you have set, and then
plays your recorded greeting. The printer monitors the call during this time, "listening" for fax tones. If
incoming fax tones are detected, the printer emits fax reception tones and receives the fax; if there are no
fax tones, the printer stops monitoring the line and your answering machine can record a voice message.
If you encounter problems setting up the printer with optional equipment, contact your local service provider
or vendor for further assistance.
124 Appendix B Additional fax setup ENWW
Shared voice/fax line with computer DSL/ADSL modem and answering machine
Figure B-15 Back view of the printer
1 Telephone wall jack.
2 Parallel splitter.
3DSL/ADSL filter.
4Answering machine.
5 Telephone (optional).
6DSL/ADSL modem.
7 Computer.
8 Phone cord provided with the printer connected to the 1-LINE port on the back of the printer.
You might need to connect the supplied phone cord to the adapter provided for your country/region.
NOTE: You need to purchase a parallel splitter. A parallel splitter has one RJ-11 port on the front and two
RJ-11 ports on the back. Do not use a 2–line phone splitter, a serial splitter, or a parallel splitter which has
two RJ-11 ports on the front and a plug on the back.
Figure B-16 Example of a parallel splitter
To set up the printer with a computer DSL/ADSL modem
1. Obtain a DSL/ADSL filter from your DSL/ADSL provider.
ENWW Set up faxing (parallel phone systems) 125
NOTE: Phones in other parts of the home/office sharing the same phone number with DSL/ADSL
service need to be connected to additional DSL/ADSL filters, to avoid noise when making voice calls.
2. Using the phone cord supplied in the box with the printer, connect one end to the DSL/ADSL filter, then
connect the other end to the port labeled 1-LINE on the back of the printer.
NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/
region.
If you do not use the supplied cord to connect from the DSL/ADSL filter to the printer, you might not be
able to fax successfully. This special phone cord is different from the phone cords you might already
have in your home or office.
3. Connect the DSL/ADSL filter to the splitter.
4. Unplug the answering machine from the telephone wall jack, and connect it to the port labeled 2-EXT on
the back of the printer.
NOTE: If you do not connect your answering machine directly to the printer, fax tones from a sending
fax machine might be recorded on your answering machine, and you might not receive faxes with the
printer.
5. Connect the DSL modem to the parallel splitter.
6. Connect the parallel splitter to the wall jack.
7. Set your answering machine to answer after a low number of rings.
8. Change your Rings to Answer setting on the printer to the maximum number of rings supported by the
printer.
NOTE: The maximum number of rings varies by country/region.
9. Run a fax test.
When the phone rings, your answering machine answers after the number of rings you have set, and then
play your recorded greeting. The printer monitors the call during this time, “listening” for fax tones. If
incoming fax tones are detected, the printer emits fax reception tones and receive the fax; if there are no fax
tones, the printer stops monitoring the line and your answering machine can record a voice message.
If you use the same phone line for telephone, fax, and have a computer DSL modem, follow these
instructions to set up your fax.
If you encounter problems setting up the printer with optional equipment, contact your local service provider
or vendor for further assistance.
Case K: Shared voice/fax line with computer dial-up modem and voice mail
If you receive both voice calls and fax calls at the same phone number, use a computer dial-up modem on the
same phone line, and subscribe to a voice mail service through your telephone company, set up the printer as
described in this section.
NOTE: You cannot receive faxes automatically if you have a voice mail service at the same phone number
you use for fax calls. You must receive faxes manually; this means you must be available to respond in
person to incoming fax calls. If you want to receive faxes automatically instead, contact your telephone
company to subscribe to a distinctive ring service, or to obtain a separate phone line for faxing.
Since your computer dial-up modem shares the phone line with the printer, you cannot use both your modem
and the printer simultaneously. For example, you cannot use the printer for faxing if you are using your
computer dial-up modem to send an email or access the Internet.
126 Appendix B Additional fax setup ENWW
There are two different ways to set up the printer with your computer based on the number of phone ports
on your computer. Before you begin, check your computer to see if it has one or two phone ports.
●If your computer has only one phone port, you need to purchase a parallel splitter (also called
a coupler), as shown in the illustration. (A parallel splitter has one RJ-11 port on the front and two RJ-11
ports on the back. Do not use a two-line phone splitter, a serial splitter, or a parallel splitter which has
two RJ-11 ports on the front and a plug on the back.)
Figure B-17 Example of a parallel splitter
●If your country/region is listed in the table, you probably have a parallel-type telephone system. In
a parallel-type phone system, you are able to connect shared telephone equipment to the phone line by
using the "2-EXT" port on the back of the printer.
Figure B-18 Back view of the printer
1 Telephone wall jack.
2 Use the phone cord supplied in the box with the printer to connect to the 1-LINE port.
You might need to connect the supplied phone cord to the adapter provided for your country/
region.
3 Computer with modem.
4 Telephone.
To set up the printer on the same phone line as a computer with two phone ports
1. Remove the white plug from the port labeled 2-EXT on the back of the printer.
2. Find the phone cord that connects from the back of your computer (your computer dial-up modem) to
a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port labeled
2-EXT on the back of the printer.
3. Connect a phone to the "OUT" port on the back of your computer dial-up modem.
4. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack,
then connect the other end to the port labeled 1-LINE on the back of the printer.
ENWW Set up faxing (parallel phone systems) 127
NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/
region.
If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not
be able to fax successfully. This special phone cord is different from the phone cords you might already
have in your home or office.
5. If your modem software is set to receive faxes to your computer automatically, turn off that setting.
NOTE: If you do not turn off the automatic fax reception setting in your modem software, the printer
cannot receive faxes.
6. Turn off the Auto Answer setting.
7. Run a fax test.
You must be available to respond in person to incoming fax calls, or the printer cannot receive faxes.
If you encounter problems setting up the printer with optional equipment, contact your local service provider
or vendor for further assistance.
Serial-type fax setup
For information on setting up the printer for faxing using a serial-type phone system, see the Fax
Configuration web site for your country/region.
Austria www.hp.com/at/faxconfig
Germany www.hp.com/de/faxconfig
Switzerland (French) www.hp.com/ch/fr/faxconfig
Switzerland (German) www.hp.com/ch/de/faxconfig
United Kingdom www.hp.com/uk/faxconfig
Finland www.hp.fi/faxconfig
Denmark www.hp.dk/faxconfig
Sweden www.hp.se/faxconfig
Norway www.hp.no/faxconfig
Netherlands www.hp.nl/faxconfig
Belgium (Dutch) www.hp.be/nl/faxconfig
Belgium (French) www.hp.be/fr/faxconfig
Portugal www.hp.pt/faxconfig
Spain www.hp.es/faxconfig
France www.hp.com/fr/faxconfig
Ireland www.hp.com/ie/faxconfig
Italy www.hp.com/it/faxconfig
128 Appendix B Additional fax setup ENWW
Test fax setup
You can test your fax setup to check the status of the printer and to make sure it is set up correctly for faxing.
Perform this test after you have completed setting up the printer for faxing. The test does the following:
●Tests the fax hardware
●Verifies the correct type of phone cord is connected to the printer
●Checks that the phone cord is plugged into the correct port
●Checks for a dial tone
●Tests the status of your phone line connection
●Checks for an active phone line
The printer prints a report with the results of the test. If the test fails, review the report for information on
how to fix the problem and rerun the test.
To test fax setup via the printer control panel
1. Set up the printer for faxing according to your particular home or office setup instructions.
2. Make sure the ink cartridges are installed, and that full-size paper is loaded in the input tray before
starting the test.
3. From the printer control panel display, touch Fax .
4. Touch Setup , and then touch Tools.
5. Touch Test Fax.
6. Review the report.
●If the test passes and you are still having problems faxing, check the fax settings listed in the
report to verify the settings are correct. A blank or incorrect fax setting can cause problems faxing.
●If the test fails, review the report for more information on how to fix any problems found.
ENWW Test fax setup 129
Index
A
accessibility 2
ADSL, fax setup with
parallel phone systems 111
answer ring pattern
change 39
parallel phone systems 112
answering machine
fax tones recorded 85
set up with fax (parallel phone
systems) 121
set up with fax and modem 122
automatic fax reduction 35
B
backup fax 33
baud rate 41
black and white pages
fax 28
blocked fax numbers
set up 35
both sides, print on 16
broadcast faxing
send 31
buttons, control panel 4
C
clear
fax logs 44
computer modem
shared with fax (parallel phone
systems) 116
shared with fax and answering
machine (parallel phone
systems) 122
shared with fax and voice line
(parallel phone systems) 118
shared with fax and voice mail
(parallel phone systems) 126
confirmation reports, fax 43
connectors, locating 4
control panel
buttons 4
features 4
lights 4
status icons 5
copy
specifications 91
correct port test, fax 79
customer support
warranty 89
D
dial tone test, failure 81
dial type, setting 40
dial-up modem
shared with fax (parallel phone
systems) 116
shared with fax and answering
machine (parallel phone
systems) 122
shared with fax and voice line
(parallel phone systems) 118
shared with fax and voice mail
(parallel phone systems) 126
distinctive ringing
change 39
parallel phone systems 112
double-sided printing 16
DSL, fax setup with
parallel phone systems 111
E
ECM. See error correction mode
embedded web server
Webscan 24
environment
Environmental product
stewardship program 92
environmental specifications 91
error correction mode 32
error reports, fax 44
F
fax
answer mode 39
answering machine and modem,
shared with (parallel phone
systems) 122
answering machine
troubleshoot 85
answering machine, set up
(parallel phone systems) 121
auto answer 39
backup fax 33
blocking numbers 35
confirmation reports 43
dial tone test, failed 81
dial type, setting 40
distinctive ringing setup (parallel
phone systems) 112
distinctive ringing, change
pattern 39
DSL, set up (parallel phone
systems) 111
error correction mode 32
error reports 44
forwarding 34
header 38
Internet Protocol, over 42
ISDN line, set up (parallel phone
systems) 112
line condition test, failed 81
log, clear 44
log, print 44
manual receive 32
modem and answering machine,
shared with (parallel phone
systems) 122
modem and voice line, shared
with (parallel phone systems)
118
modem and voice mail, shared
with (parallel phone systems)
126
modem, shared with (parallel
phone systems) 116
monitor dialing 30, 31
PBX system, set up (parallel
phone systems) 112
phone cord connection test,
failed 79
phone cord type test, failed 80
print last transaction details 44
130 Index ENWW
receive 32
receive, troubleshoot 82, 84
redial options 40
reduction 35
reports 42
reprint 34
rings to answer 39
send 28
send, troubleshoot 82, 85
separate line setup (parallel
phone systems) 110
settings, change 38
shared phone line setup (parallel
phone systems) 113
sound volume 41
speed 41
test failed 78
test setup 129
troubleshoot 77
voice mail, set up (parallel phone
systems) 115
wall jack test, failed 79
Fax screen 5
forwarding faxes 34
G
glass, scanner
locating 3
H
hardware, fax setup test 78
header, fax 38
Help button 5
HP Utility (OS X)
opening 61
I
ink cartridges 4
Internet Protocol
fax, using 42
IP settings 59
ISDN line, set up with fax
parallel phone systems 112
J
jams
clear 63
paper to avoid 8
junk fax mode 35
L
lights, control panel 4
line condition test, fax 81
log, fax
print 44
M
manual faxing
receive 32
send 29, 30
media
duplexing 16
memory
reprint faxes 34
save faxes 33
modem
shared with fax (parallel phone
systems) 116
shared with fax and answering
machine (parallel phone
systems) 122
shared with fax and voice line
(parallel phone systems) 118
shared with fax and voice mail
(parallel phone systems) 126
monitor dialing 30, 31
multi-feeds, troubleshoot 67
N
networks
connector illustration 4
IP settings 59
settings, change 59
wireless communication setup
55
O
OS X
HP Utility 61
output tray
locating 3
P
paper
clear jams 63
HP, order 7
selecting 8
skewed pages 67
troubleshoot feeding 67
paper-feed problems,
troubleshoot 67
parallel phone systems
answering machine setup 121
distinctive ringing setup 112
DSL setup 111
ISDN setup 112
modem and answering machine
setup 122
modem and voice mail setup
126
modem setup 116
modem shared with voice line
setup 118
PBX setup 112
separate line setup 110
shared line setup 113
PBX system, set up with fax
parallel phone systems 112
phone book
change contact 36
change group contacts 37
delete contacts 38
send fax 28
set up 36
set up group contacts 37
phone cord
connected to correct port test
failed 79
correct type test failed 80
phone line, answer ring pattern 39
phone, fax from
receive 32
send, 29
power
troubleshoot 87
power input, locating 4
print
double-sided 16
fax logs 44
fax reports 42
faxes 34
last fax details 44
specifications 91
troubleshoot 87
printer control panel
locating 3
network settings 59
send faxes 28
printer software (Windows)
about 60
opening 11, 60
ENWW Index 131
pulse dialing 40
R
radio interference
regulatory information 103
rear access panel
illustration 4
receive faxes
auto answer mode 39
automatically 32
blocking numbers 35
forwarding 34
manually 32
rings to answer 39
troubleshoot 82, 84
recycle
ink cartridges 93
redial options, setting 40
reduce fax 35
regulatory information 96, 103
regulatory notices
regulatory model identification
number 97
reports
confirmation, fax 43
error, fax 44
fax test failed 78
reprint
faxes from memory 34
rings to answer 39
S
save
faxes in memory 33
scan
from Webscan 24
scan specifications 91
scanner glass
locating 3
send faxes
basic fax 28
from a phone 29
memory, from 31
monitor dialing 30, 31
troubleshoot 82, 85
settings
network 59
speed, fax 41
volume, fax 41
setup
answering machine (parallel
phone systems) 121
answering machine and modem
(parallel phone systems) 122
computer modem (parallel phone
systems) 116
computer modem and answering
machine (parallel phone
systems) 122
computer modem and voice line
(parallel phone systems) 118
computer modem and voice mail
(parallel phone systems) 126
distinctive ringing 39
distinctive ringing (parallel phone
systems) 112
DSL (parallel phone systems)
111
ISDN line (parallel phone
systems) 112
PBX system (parallel phone
systems) 112
separate fax line (parallel phone
systems) 110
shared phone line (parallel phone
systems) 113
test fax 129
voice mail (parallel phone
systems) 115
voice mail and computer modem
(parallel phone systems) 126
skew, troubleshoot
print 67
software
Webscan 24
status icons 5
subscriber identification code 38
system requirements 90
T
technical information
copy specifications 91
environmental specifications 91
print specifications 91
scan specifications 91
system requirements 90
telephone line, answer ring pattern
39
telephone wall jack, fax 79
telephone, fax from
receive 32
send 29
tests, fax
dial tone, failed 81
failed 78
fax line condition 81
fax phone cord type test failed
80
hardware, failed 78
port connection, failed 79
setup 129
telephone wall jack 79
tone dialing 40
trays
clear paper jams 63
locating 3
paper-width guides illustration
3
troubleshoot feeding 67
troubleshoot
answering machines 85
fax 77
fax dial tone test failed 81
fax hardware test failed 78
fax line test failed 81
fax phone cord connection test
failed 79
fax phone cord type test failed
80
fax tests 78
fax wall jack test, failed 79
multiple pages are picked 67
paper not picked up from tray
67
paper-feed problems 67
power 87
print 87
receive faxes 82, 84
send faxes 82, 85
skewed pages 67
two-sided printing 16
U
USB connection
port, locating 3, 4
132 Index ENWW
