Table of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures preliminary requirements
- Removal and replacement procedures for Customer Self-Repair parts
- Removal and replacement procedures for Authorized Service Provider parts
- Computer Setup (BIOS) and MultiBoot in Windows 7
- Computer Setup (BIOS) and MultiBoot in Windows 8
- Computer Setup (BIOS), TPM, and HP Sure Start in Windows 10
- HP PC Hardware Diagnostics (UEFI)
- Backup and recovery in Windows 7
- Backup and recovery in Windows 8
- Backup and recovery in Windows 10
- Specifications
- Statement of Volatility
- Power cord set requirements
- Recycling
- Index
HP 9480M User Manual
Displayed below is the user manual for 9480M by HP which is a product in the Notebooks category. This manual has pages.
Related Manuals
HP EliteBook Folio 9480m Notebook PC
Maintenance and Service Guide
© Copyright 2015 HP Development Company,
L.P.
AMD is a trademark of Advanced Micro Devices,
Inc. Bluetooth is a trademark owned by its
proprietor and used by HP Inc. under license.
Intel, Celeron, and Pentium are trademarks of
Intel Corporation in the U.S. and other
countries. Microsoft and Windows are
trademarks of the Microsoft group of
companies.
The information contained herein is subject to
change without notice. The only warranties for
HP products and services are set forth in the
express warranty statements accompanying
such products and services. Nothing herein
should be construed as constituting an
additional warranty. HP shall not be liable for
technical or editorial errors or omissions
contained herein.
Second Edition: August 2015
First Edition: July 2014
Document Part Number: 768849-002
Product notice
This user guide describes features that are
common to most models. Some features may
not be available on your computer.
Not all features are available in all editions of
Windows. This computer may require upgraded
and/or separately purchased hardware, drivers
and/or software to take full advantage of
Windows functionality. Go to
http://www.microsoft.com for details.
Software terms
By installing, copying, downloading, or
otherwise using any software product
preinstalled on this computer, you agree to be
bound by the terms of the HP End User License
Agreement (EULA). If you do not accept these
license terms, your sole remedy is to return the
entire unused product (hardware and software)
within 14 days for a full refund subject to the
refund policy of your seller.
For any further information or to request a full
refund of the price of the computer, please
contact your seller.
Important Notice about Customer Self-Repair Parts
CAUTION: Your computer includes Customer Self-Repair parts and parts that should only be accessed by an
authorized service provider. See Chapter 5, "Removal and replacement procedures for Customer Self-Repair
parts," for details. Accessing parts described in Chapter 6, "Removal and replacement procedures for
Authorized Service Provider only parts," can damage the computer or void your warranty.
iii
iv Important Notice about Customer Self-Repair Parts
Safety warning notice
WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the
device directly on your lap or obstruct the device air vents. Use the device only on a hard, at surface. Do not
allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or
clothing, to block airow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as
pillows or rugs or clothing, during operation. The device and the AC adapter comply with the user-accessible
surface temperature limits dened by the International Standard for Safety of Information Technology
Equipment (IEC 60950).
v
vi Safety warning notice
Table of contents
1 Product description ....................................................................................................................................... 1
2 External component identication .................................................................................................................. 5
Display .................................................................................................................................................................... 5
Top .......................................................................................................................................................................... 6
TouchPad ............................................................................................................................................. 6
Lights ................................................................................................................................................... 7
Buttons, speakers, and ngerprint reader (select models only) ........................................................ 8
Keys ..................................................................................................................................................... 9
Front ..................................................................................................................................................................... 10
Left ....................................................................................................................................................................... 11
Right ..................................................................................................................................................................... 12
Bottom ................................................................................................................................................................. 13
Labels ................................................................................................................................................................... 15
3 Illustrated parts catalog .............................................................................................................................. 16
Computer major components .............................................................................................................................. 17
Display assembly subcomponents ...................................................................................................................... 20
Mass storage devices ........................................................................................................................................... 21
Miscellaneous parts ............................................................................................................................................. 22
4 Removal and replacement procedures preliminary requirements .................................................................... 24
Tools required ...................................................................................................................................................... 24
Service considerations ......................................................................................................................................... 24
Plastic parts ....................................................................................................................................... 24
Cables and connectors ...................................................................................................................... 24
Drive handling ................................................................................................................................... 25
Grounding guidelines ........................................................................................................................................... 25
Electrostatic discharge damage ........................................................................................................ 25
Packaging and transporting guidelines .......................................................................... 27
Workstation guidelines ................................................................................ 27
5 Removal and replacement procedures for Customer Self-Repair parts ............................................................. 29
Component replacement procedures .................................................................................................................. 29
Battery ............................................................................................................................................... 29
SIM ..................................................................................................................................................... 30
vii
Hard drive cover ................................................................................................................................ 32
Hard drive/SSD drive ......................................................................................................................... 33
mSATA drive ....................................................................................................................................... 35
RTC battery ........................................................................................................................................ 37
Service cover ..................................................................................................................................... 38
Memory module ................................................................................................................................ 39
WWAN module ................................................................................................................................... 41
WLAN module .................................................................................................................................... 43
Keyboard ........................................................................................................................................... 45
6 Removal and replacement procedures for Authorized Service Provider parts ................................................... 49
Component replacement procedures .................................................................................................................. 49
Display assembly components (panel, bezel, webcam, microphone) ............................................. 50
Base enclosure .................................................................................................................................. 53
Touchpad ........................................................................................................................................... 55
Power connector ............................................................................................................................... 57
Fan ..................................................................................................................................................... 58
System board .................................................................................................................................... 59
Heat sink ............................................................................................................................................ 62
Speaker assembly ............................................................................................................................. 64
Smart card board ............................................................................................................................... 65
Fingerprint reader board ................................................................................................................... 66
Display assembly ............................................................................................................................... 67
7 Computer Setup (BIOS) and MultiBoot in Windows 7 ....................................................................................... 73
Using Computer Setup ......................................................................................................................................... 73
Starting Computer Setup .................................................................................................................. 73
Navigating and selecting in Computer Setup ................................................................................... 73
Restoring factory settings in Computer Setup ................................................................................. 74
Updating the BIOS ............................................................................................................................. 74
Determining the BIOS version ......................................................................................... 74
Downloading a BIOS update ........................................................................................... 75
Using MultiBoot ................................................................................................................................................... 75
About the boot device order ............................................................................................................. 75
Choosing MultiBoot preferences ....................................................................................................... 76
Setting a new boot order in Computer Setup ................................................................. 76
Dynamically choosing a boot device using the f9 prompt ............................................. 76
Setting a MultiBoot Express prompt .............................................................................. 77
Entering MultiBoot Express preferences ........................................................................ 77
viii
8 Computer Setup (BIOS) and MultiBoot in Windows 8 ....................................................................................... 78
Using Computer Setup ......................................................................................................................................... 78
Starting Computer Setup .................................................................................................................. 78
Navigating and selecting in Computer Setup ................................................................................... 78
Restoring factory settings in Computer Setup ................................................................................. 79
Updating the BIOS ............................................................................................................................. 79
Determining the BIOS version ......................................................................................... 79
Downloading a BIOS update ........................................................................................... 80
Using MultiBoot ................................................................................................................................................... 81
About the boot device order ............................................................................................................. 81
Choosing MultiBoot preferences ....................................................................................................... 81
Setting a new boot order in Computer Setup ................................................................. 81
Dynamically choosing a boot device using the f9 prompt ............................................. 82
Setting a MultiBoot Express prompt .............................................................................. 82
Entering MultiBoot Express preferences ........................................................................ 82
9 Computer Setup (BIOS), TPM, and HP Sure Start in Windows 10 ........................................................................ 83
Using Computer Setup ......................................................................................................................................... 83
Starting Computer Setup .................................................................................................................. 83
Navigating and selecting in Computer Setup ................................................................................... 83
Restoring factory settings in Computer Setup ................................................................................. 84
Updating the BIOS ............................................................................................................................. 85
Determining the BIOS version ......................................................................................... 85
Downloading a BIOS update ........................................................................................... 85
Changing the boot order using the f9 prompt .................................................................................. 86
TPM BIOS settings (select products only) ........................................................................................................... 86
Using HP Sure Start (select products only) ......................................................................................................... 87
10 HP PC Hardware Diagnostics (UEFI) .............................................................................................................. 88
Downloading HP PC Hardware Diagnostics (UEFI) to a USB device .................................................................... 88
11 Backup and recovery in Windows 7 .............................................................................................................. 90
Creating recovery media and backups ................................................................................................................ 90
Guidelines .......................................................................................................................................... 90
Creating recovery media with HP Recovery Disc Creator ................................................................. 90
Creating recovery media ................................................................................................. 91
Backing up your information ............................................................................................................. 91
Performing a system recovery ............................................................................................................................ 92
Using the Windows recovery tools .................................................................................................... 92
Using f11 recovery tools (select models only) ................................................................................. 93
ix
Using Windows 7 operating system media ....................................................................................... 93
12 Backup and recovery in Windows 8 .............................................................................................................. 95
Backing up your information ............................................................................................................................... 95
Performing a system recovery ............................................................................................................................ 95
Using the Windows recovery tools .................................................................................................... 95
Using f11 recovery tools ................................................................................................................... 96
Using Windows operating system media (purchased separately) ................................................... 97
Using Windows Refresh or Windows Reset ...................................................................................... 97
Using HP Software Setup .................................................................................................................. 97
13 Backup and recovery in Windows 10 ............................................................................................................ 98
Creating recovery media and backups ................................................................................................................ 98
Creating HP Recovery media (select products only) ......................................................................... 98
Using Windows tools ........................................................................................................................................... 99
Restore and recovery ......................................................................................................................................... 100
Recovering using HP Recovery Manager ........................................................................................ 100
What you need to know before you get started ........................................................... 100
Using the HP Recovery partition (select products only) .............................................. 101
Using HP Recovery media to recover ............................................................................ 101
Changing the computer boot order .............................................................................. 102
Removing the HP Recovery partition (select products only) ....................................... 103
14 Specications .......................................................................................................................................... 104
Computer specications .................................................................................................................................... 104
35.6-cm (14.0-in) display specications .......................................................................................................... 105
Hard drive specications ................................................................................................................................... 106
Solid-state drive specications ......................................................................................................................... 107
mSATA drive specications ................................................................................................................................ 108
15 Statement of Volatility ............................................................................................................................. 109
Non-volatile memory usage .............................................................................................................................. 110
Questions and answers ..................................................................................................................................... 112
16 Power cord set requirements .................................................................................................................... 113
Requirements for all countries .......................................................................................................................... 113
Requirements for specic countries and regions ............................................................................................. 113
17 Recycling ................................................................................................................................................ 115
Battery ............................................................................................................................................................... 115
x
Display ............................................................................................................................................................... 115
Index ........................................................................................................................................................... 121
xi
xii
1 Product description
Category Description
Product Name HP EliteBook Folio 9480m Notebook PC
Processors Intel® Core® processors:
●i7-4650U 1.7-GHz (max turbo frequency 3.3-GHz), 4-MB L3 Cache, 15W
●i7-4600U 2.1-GHz (max turbo frequency 3.3-GHz), 4-MB L3 Cache, 15W
●i5-4310U 2.0-GHz (max turbo frequency 3.0-GHz), 3-MB L3 Cache, 15W
●i5-4210U 1.7-GHz (max turbo frequency 2.7-GHz), 3-MB L3 Cache, 15W
Chipset Integrated with processor
Graphics Intel UMA Graphics with shared video memory: Intel HD Graphics 5000 (i7-4650U)
Intel UMA Graphics with shared video memory: Intel HD Graphics 4400 (i7-46000U,
i5-4310U, i5-4210U))
Panels 35.6-cm (14.0-in), 3.0-mm, at/thin backlit, light-emitting diode (LED), high-
denition+ (HD+), AntiGlare (AG), SVA (1600×900) display with and without webcam
35.6-cm (14.0-in), 3.0-mm, at/thin backlit, LED, HD, AG, SVA (1366×768) display
with and without webcam
Memory Two customer-accessible/upgradable memory module slots
DDR3L PC3-1600-MHz dual channel support
Supports 16384-MB of system RAM in the following congurations:
●16384-MB (8192-MB×2)
●8192-MB (8192-MB×1)
●4096-MB (4096-MB×1)
Flash cache 32-GB MLC mSATA module, not available on computer models equipped with SSD or
SED.
Supports no Flash cache module conguration.
Hard drive Supports 7.0-mm (.28-in), 6.35-cm (2.5-in) SATA hard drives and solid-state drives
●500-GB, 7200-rpm, self-encrypting drive (SED)
●500-GB, 7200-rpm
Solid-state drive Supports the following SATA III SSDs:
●256-GB SED
●240-GB
●180-GB
●128-GB
MiniCard SSD Supports 120-GB M.2 solid-state drive
No available with ash cache module
1
Category Description
Audio and video Two stereo speakers
HD audio with DTS Studio Sound
Integrated 720p HD webcam (supports no camera option)
Integrated dual-array microphone
Ethernet Intel I1218LM 10/100/1000 Ethernet network interface card (NIC) with iAMT
NIC Power Down technology
S3/S4/S5 wake on LAN
Wireless Integrated wireless local area network (WLAN) options by way of wireless module
Two WLAN antennas built into display assembly
Support for the following WLAN formats:
●Intel Dual Band Wireless-AC 7260 802.11 AC 2x2 WiFi + BT 4.0 Combo Adapter
●HP Intel Dual Band Wireless-N 7260AN 802.11 a/b/g/n (2x2) combination WiFi
and Bluetooth 4.0 WLAN module
●Intel Dual Band Wireless-N 7260AN 802.11 a/b/g/n (2x2) combination WiFi and
Bluetooth 4.0 WLAN module for use in Indonesia
Supports no WLAN option
Integrated wireless wide area network (WWAN) options by way of wireless module
Two world-wide/5-band WWAN antennas built into display assembly
Secured by subscriber identity module (SIM, user-accessible behind battery)
Support for the following WWAN formats:
●HP lt4112 LTE/HSPA+ Mobile Broadband Module
●HP lt4211 LTE/EV-DO/HSPA+ Gobi 4G Module
●HP hs3110 HSPA+ Mobile Broadband Module
Supports no WWAN option
Supports WWAN after market option
External media cards Secure Digital (SD) ash media slot supporting the following digital card formats:
●Secure Digital (SD) Memory Card
●SDHC
●SDXC
Ports Headphone/Microphone combo
Battery connector
DisplayPort 1.2a
Docking connector
Multi-Pin AC Port
RJ-45 (Ethernet)
USB 3.0 ports (2)
USB 3.0 charging/powered port (1)
2 Chapter 1 Product description
Category Description
VGA (Dsub 15 pin) supporting: 1920×1200 external resolution @ 60 Hz, hot plug and
unplug and auto-detection for correct output to wide-aspect vs. standard aspect
video
Keyboard/pointing devices Full chiclet keyboard, backlit, dual-point, spill-resistant with durakeys
Gesture support: MultiTouch gestures enabled, two-nger scrolling, and pinch-zoom
as default
Taps enabled by default
Touchpad on/o button
Touchpad supports 2-way scroll with legend
Power requirements Supports the following AC adapters:
65-W Smart EM adapter
45-W Smart AC adapter
45-W AC adapter (2-prong) for use in Japan
Supports the following batteries:
●Primary: 4-cell, 52-Wh, 3.55-Ah battery
●Secondary: 6-cell, 60-Wh, 2.7-Ah battery
Supports the following power cords:
●2 wire plug (1.0 m)
●3 wire plug with ground pin (1.0 m)
●3 wire plug with ground pin (1.8 m)
Security Supports security cable lock
Supports ngerprint reader and no ngerprint reader option
Supports Trusted Platform Module (TPM) 1.2 (Inneon, soldered down)
Integrated Smart Card reader (active)
Full volume encryption
HP ProtectTools
Operating system Preinstalled:
●Windows 10
●Windows 10 Professional
●Windows 8.1 Professional 64 DPK with Windows 7 Professional 64 image
●Windows 8.1 Professional 64 DPK with Windows 7 Professional 64 image –
MSNA
●Windows 8.1 EM 64
●Windows 8.1 CH 64
●Windows 8.1 ML 64
●Windows 8.1 Professional 64
●Windows 8.1 Professional 64 – MSNA
3
Category Description
●FreeDOS
●Ubuntu Linux
Restore media
●DRDVD Windows 7
●DRDVD Windows 8.1
●SRDVD Ubuntu
●Windows 7 Professional 64
●Windows 8.1 Professional 64
●Windows 8.1 64-bit
●Windows 8.1 Country Specic 64-bit
●Windows 8.1 Emerging Market 64-bit
Web-only support:
●Windows 10
●Windows 10 Professional
●Windows 8.1 Enterprise 64
●Windows 7 Professional 64- and 32-bit
●Windows 7 Enterprise 64- and 32-bit
Serviceability End user replaceable parts:
●AC adapter
●Battery
●Hard drive
●Solid-state drive
●Keyboard
●Memory module
●mSATA ash cache
●WLAN module
●WWAN module
4 Chapter 1 Product description
2 External component identication
Display
Component Description
(1) WLAN antennas (2)* (select models only) Send and receive wireless signals to communicate with wireless local
area networks (WLAN).
(2) WWAN antennas (2)* (select models only) Send and receive wireless signals to communicate with wireless wide
area networks (WWAN).
(3) Internal microphones (2) Record sound.
(4) Webcam light (select models only) On: The webcam is in use.
(5) Webcam (select models only) Records video and captures photographs. Some models allow you to
video conference and chat online using streaming video.
To use the webcam:
Windows 7: Select Start > All Programs > Communication and Chat
> CyberLink YouCam.
Windows 8.1: Access HP Support Assistant. To access HP Support
Assistant, from the Start screen, select the HP Support Assistant
app.
Windows 10: Type camera in the taskbar search box, and then
select Camera.
(6) Internal display switch Turns o the display or initiates Sleep if the display is closed while
the power is on.
Display 5
Component Description
NOTE: The display switch is not visible from the outside of the
computer.
*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the
antennas free from obstructions. For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices
that applies to your country or region. To access this guide:
Windows 7: Select Start > Help and Support > User Guides.
Windows 8.1: From the Start screen, type support, and then select the HP Support Assistant app.
Windows 10: Select Start, select All apps, select HP Help and Support, and then select HP Documentation.
Top
TouchPad
Component Description
(1) Pointing stick Moves the pointer and selects or activates items on the screen.
(2) Left pointing stick button Functions like the left button on an external mouse.
(3) TouchPad on/o button Turns the TouchPad on and o.
(4) TouchPad zone Moves the pointer and selects or activates items on the screen.
(5) Left TouchPad button Functions like the left button on an external mouse.
(6) Right pointing stick button Functions like the right button on an external mouse.
(7) Right TouchPad button Functions like the right button on an external mouse.
6 Chapter 2 External component identication
Lights
Component Description
(1) Power light ●On: The computer is on.
●Blinking: The computer is in the Sleep state, a power-saving
state. The computer shuts o power to the display and
other unneeded components.
●O: The computer is o or in Hibernation. Hibernation is a
power-saving state that uses the least amount of power.
NOTE: For select models, the Intel® Rapid Start Technology
feature is enabled at the factory. Rapid Start Technology allows
your computer to resume quickly from inactivity.
(2) Microphone mute light ●Amber: microphone sound is o.
●O: microphone sound is on.
(3) Num lock light On: Num lock is on.
(4) Wireless light White: An integrated wireless device, such as a wireless local area
network (WLAN) device and/or a Bluetooth® device, is on.
NOTE: On some models, the wireless light is amber when all
wireless devices are o.
(5) Mute light ●Amber: Computer sound is o.
●White: Computer sound is on.
(6) Caps lock light White: Caps lock is on, which switches the keys to all capital
letters.
(7) TouchPad light ●Amber: The TouchPad is o.
●O: The TouchPad is on.
Top 7
Buttons, speakers, and ngerprint reader (select models only)
Component Description
(1) Power button ●When the computer is o, press the button to turn on the
computer.
●When the computer is on, press the button briey to initiate
Sleep.
●When the computer is in the Sleep state, press the button
briey to exit Sleep.
●When the computer is in Hibernation, press the button
briey to exit Hibernation.
CAUTION: Pressing and holding down the power button will
result in the loss of unsaved information.
If the computer has stopped responding and Windows shutdown
procedures are ineective, press and hold the power button for at
least 5 seconds to turn o the computer.
NOTE: For select models, the Intel® Rapid Start Technology
feature is enabled at the factory. Rapid Start Technology allows
your computer to resume quickly from inactivity.
To learn more about your power settings, see your power
options:
Windows 7: Select Start > Control Panel > System and Security
> Power Options.
Windows 8.1: From the Start screen, type power, select Power
and sleep settings, and then select Power and sleep from the
list of applications.
Windows 10: Type power in the taskbar search box, and then
select Power and sleep settings.
8 Chapter 2 External component identication
Component Description
– or –
Right-click the Start button, and then select Power Options.
(2) Wireless button Turns the wireless feature on or o but does not establish a
wireless connection.
(3) Volume mute button Mutes and restores speaker sound.
(4) Fingerprint reader (select models only) Allows a ngerprint logon to Windows, instead of a password
logon.
Keys
Component Description
(1) esc key Displays system information when pressed in combination with
the fn key.
(2) fn key Executes frequently used system functions when pressed in
combination with a function key, the num lk key, the esc key, or
the b key.
(3) Windows key Windows 7: Displays the Windows Start menu.
Windows 8.1: Returns you to the Start screen from an open app
or the Windows desktop.
NOTE: Pressing the Windows key again will return you to the
previous screen.
Windows 10: Opens the Windows Start menu.
NOTE: Pressing the Windows key again will close the Start
menu.
(4) Function keys Execute frequently used system functions when pressed in
combination with the fn key.
Top 9
Component Description
(5) Embedded numeric keypad When the keypad is turned on, it can be used like an external
numeric keypad.
Each key on the keypad performs the function indicated by the
icon in the upper-right corner of the key.
(6) Windows applications key Windows 7: Displays a shortcut menu for items beneath the
cursor.
Windows 8.1: Displays options for a selected object.
Windows 10: Displays options for a selected object.
(7) num lk key Turns the embedded numeric keypad on and o when pressed in
combination with the fn key.
Alternates between the navigational and numeric functions on
the integrated numeric keypad.
Front
Component Description
(1) Wireless light White: An integrated wireless device, such as a wireless
local area network (WLAN) device and/or a Bluetooth®
device, is on.
NOTE: On some models, the wireless light is amber when
all wireless devices are o.
(2) Power light ●On: The computer is on.
●Blinking: The computer is in the Sleep state, a power-
saving state. The computer shuts o power to the
display and other unneeded components.
●O: The computer is o or in Hibernation.
Hibernation is a power-saving state that uses the
least amount of power.
NOTE: For select models, the Intel® Rapid Start
Technology feature is enabled at the factory. Rapid Start
Technology allows your computer to resume quickly from
inactivity.
(3) AC adapter/Battery light ●White: The computer is connected to external power
and the battery is charged from 90 to 99 percent.
●Amber: The computer is connected to external power
and the battery is charged from 0 to 89 percent.
●Blinking amber: A battery that is the only available
power source has reached a low battery level. When
10 Chapter 2 External component identication
Component Description
the battery reaches a critical battery level, the
battery light begins blinking rapidly.
●O: The battery is fully charged.
(4) Hard drive light ●Blinking white: The hard drive is being accessed.
●Amber: HP 3D DriveGuard has temporarily parked the
hard drive.
Left
Component Description
(1) Power connector Connects an AC adapter.
(2) Vent Enables airow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal for
the internal fan to cycle on and o during routine operation.
(3) Security cable slot Attaches an optional security cable to the computer.
NOTE: The security cable is designed to act as a deterrent, but
it may not prevent the computer from being mishandled or
stolen.
(4) USB 3.0 charging (powered) port Connects an optional USB device, such as a keyboard, mouse,
external drive, printer, scanner or USB hub. Standard USB ports
will not charge all USB devices or will charge using a low current.
Some USB devices require power and require you to use a
powered port.
NOTE: USB charging ports can also charge select models of
cell phones and MP3 players, even when the computer is o.
(5) Audio-out (headphone)/Audio-in (microphone)
jack
Connects optional powered stereo speakers, headphones,
earbuds, a headset, or a television audio cable. Also connects an
optional headset microphone. This jack does not support
optional microphone-only devices.
WARNING! To reduce the risk of personal injury, adjust the
volume before putting on headphones, earbuds, or a headset.
For additional safety information, see the Regulatory, Safety,
and Environmental Notices. To access this guide:
Left 11
Component Description
NOTE: Windows 7: Select Start > Help and Support > User
Guides.
Windows 8.1:
From the Start screen, type support, and then select the HP
Support Assistant app.
‒ or –
From the Windows desktop, click the question mark icon in the
notication area, at the far right of the taskbar.
Windows 10:
Select Start, select All apps, select HP Help and Support, and
then select HP Documentation.
NOTE: When a device is connected to the jack, the computer
speakers are disabled.
Be sure that the device cable has a 4-conductor connector that
supports both audio-out (headphone) and audio-in
(microphone).
(6) Smart card reader Supports optional Smart cards.
Right
Component Description
(1) USB 3.0 ports (2) Each USB 3.0 port connects an optional USB device, such as a
keyboard, mouse, external drive, printer, scanner or USB hub.
(2) DisplayPort Connects an optional digital display device, such as a high-
performance monitor or projector.
(3) Memory card reader Reads optional memory cards that store, manage, share, or
access information.
(4) External monitor port Connects an external VGA monitor or projector.
(5) Docking connector Connects an optional docking device.
(6) RJ-45 (network) jack/lights Connects a network cable.
●Green (right): The network is connected.
●Amber (left): The network is showing activity.
12 Chapter 2 External component identication
Bottom
Component Description
(1) Wireless and memory module
compartment
Contains the wireless and memory modules.
CAUTION: To prevent an unresponsive system, replace
the wireless module only with a wireless module
authorized for use in the computer by the governmental
agency that regulates wireless devices in your country or
region. If you replace the module and then receive a
warning message, remove the module to restore computer
functionality, and then contact support through HP
Support Assistant.
To access Help and Support in Windows 7, select Start >
Help and Support.
To access HP Support Assistant in Windows 8.1, from the
Start screen, select the HP Support Assistant app.
Windows 10: Type support in the taskbar search box,
and then select the HP Support Assistant app.
– or –
Click the question mark icon in the taskbar.
(2) Travel battery connector Connects an optional travel battery.
(3) Vents (2) Enable airow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and o during routine
operation.
Bottom 13
Component Description
(4) Speakers (2) Produce sound.
(5) Hard drive bay Contains the hard drive.
(6) Battery release latch Releases the battery from the battery bay.
(7) Battery bay and SIM slot Holds the battery. Supports a wireless subscriber identity
module (SIM). The SIM slot is located inside the battery
bay.
14 Chapter 2 External component identication
Labels
The labels axed to the computer provide information you may need when you troubleshoot system
problems or travel internationally with the computer.
IMPORTANT: Check the following locations for the labels described in this section: the bottom of the
computer, inside the battery bay, under the service door, or on the back of the display.
●Service label—Provides important information to identify your computer. When contacting support, you
will probably be asked for the serial number, and possibly for the product number or the model number.
Locate these numbers before you contact support.
Your service label will resemble one of the examples shown below. Refer to the illustration that most
closely matches the service label on your computer.
Component
(1) Serial number
(2) Product number
(3) Warranty period
(4) Model number (select products only)
Component
(1) Model name (select products only)
(2) Product number
(3) Serial number
(4) Warranty period
●Regulatory label(s)—Provide(s) regulatory information about the computer.
●Wireless certication label(s)—Provide(s) information about optional wireless devices and the approval
markings for the countries or regions in which the devices have been approved for use.
Labels 15
3 Illustrated parts catalog
NOTE: HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
follow the on-screen instructions.
NOTE: Details about your computer, including model, serial number, product key, and length of warranty,
are on the service tag at the bottom of your computer. See Illustrated parts catalog on page 16 for details.
16 Chapter 3 Illustrated parts catalog
Computer major components
Computer major components 17
Item Component Spare part number
(1) Display assembly: The display assembly is spared at the subcomponent level only. For more display assembly spare part
information, see Display assembly subcomponents on page 20.
(2) Keyboard (backlit; includes keyboard cable and pointing stick cable):
NOTE: For a list of keyboard country codes, see Keyboard on page 45.
785648-xx1
(3) Top cover
With ngerprint reader board 748352-001
Without ngerprint reader board 748353-001
Touchpad assembly (not illustrated) 822825-001
(4) Speakers (right and left; include cables) 702869-001
(5) AC power connector 702875-001
(6) Smart Card reader (includes cable) 769707-001
(7) Fan (includes cable) 702859-001
(8) System board (includes processor and replacement thermal material):
All system boards use the following part numbers:
xxxxxx-001: Windows 7 or non-Windows operating systems
xxxxxx-501: Windows 8.1 Standard operating system
xxxxxx-601: Windows 8.1 or Windows 10 operating system
●Intel Core i7-4650U processor 769720-xxx
●Intel Core i7-4600U processor 769719-xxx
●Intel Core i5-4310U processor 769718-xxx
●Intel Core i5-4210U processor 769717-xxx
Plastics Kit, includes: 702877-001
(9a) SD card insert
(9b) Hard drive cover
(10) Heat sink (includes replacement thermal material): 769708-001
(11) RTC battery 702853-001
(12) Fingerprint reader board (includes cable) 702845-001
(13) Base enclosure 702863-001
(14) Service cover 704441-001
Service cover, RCTO 713547-001
(15) Memory modules (PC3L-12800, 1600-MHz):
4-GB 691740-001
8-GB 693374-001
(16) WLAN module:
Intel Dual Band Wireless-AC 7260 802.11 AC 2x2 WiFi + BT 4.0 Combo Adapter 710663-001
18 Chapter 3 Illustrated parts catalog
Item Component Spare part number
HP Intel Dual Band Wireless-N 7260AN 802.11 a/b/g/n (2x2) combination WiFi and Bluetooth
4.0 WLAN module
717379-001
HP Intel Dual Band Wireless-N 7260AN 802.11 a/b/g/n (2x2) combination WiFi and Bluetooth
4.0 WLAN module for use in Indonesia
747833-001
(17) WWAN module:
HP lt4112 LTE/HSPA+ Mobile Broadband Module 740011-001
HP lt4211 LTE/EV-DO/HSPA+ Gobi 4G Module 793116-001
HP hs3110 HSPA+ Mobile Broadband Module 822828-001
(18) Solid-state drive (SSD), M.2:
120-GB, M.2 769712-001
32-GB, M.2 769711-001
Hard Drive Hardware Kit (not illustrated, includes hard drive bracket, connector,
and screws)
702870-001
(19) Solid-state drive (includes bracket, connector, and screws):
256-GB, SATA III, self-encrypting drive (SED) 769716-001
240-GB, SATA III 769715-001
180-GB, SATA III 769714-001
128-GB, SATA III 769713-001
(20) Hard drive (does not include hard drive bracket, connector, or screws):
500-GB, 7200-rpm, 7-mm, self-encrypting drive 703268-001
500-GB, 7200-rpm, 7-mm 703267-001
(21) Battery (Li ion):
4-cell, 52-Wh, 3.55-Ah 687945-001
6-cell, 60-Wh, 2.7-Ah (travel battery; not illustrated) 696621-001
Computer major components 19
Display assembly subcomponents
Item Component Spare part number
(1) Display bezel:
For use on models with a webcam 769705-001
For use on models without a webcam 769706-001
(2) Webcam/microphone module 769710-001
Microphone module 702873-001
Display Hinge Kit (includes left and right display hinges and left and right hinge covers) 702857-001
(3a) Display hinge covers (2)
(3b) Display hinges
(4) 35.6-cm (14.0-in), LED, AntiGlare display panel:
HD+ 769722-001
HD 769721-001
Antenna Kit, includes: 769704-001
(5a) WWAN antenna cables and transceivers
20 Chapter 3 Illustrated parts catalog
Item Component Spare part number
(5b) WLAN antenna cables and transceivers
(6) Display enclosure 748350-001
Display Panel Support Kit (includes WLAN antenna cables and transceivers, WWAN antenna
cables and transceivers, and display enclosure)
769709-001
Mass storage devices
Item Description Spare part number
(1) Hard drive (does not include hard drive bracket or screws):
500-GB, 7200-rpm, 7-mm, SED 703268-001
500-GB, 7200-rpm, 7-mm 703267-001
Solid-State Drive (includes drive bracket, connector, and screws):
256-GB, SATA III, self-encrypting drive (SED) 769716-001
240-GB SSD, SATA III 769715-001
180-GB, SATA III 769714-001
128-GB, SATA III 769713-001
(2a) Solid-state drive bracket
(2b) Solid-state drive
Mass storage devices 21
Item Description Spare part number
(2c) Drive connector
(3) Solid-state drive, M.2:
120-GB, M.2 769712-001
32-GB, M.2 769711-001
Hard Drive Hardware Kit (not illustrated), includes: 702870-001
Hard drive connector
Hard drive bracket
Hard drive bracket screws
Miscellaneous parts
Component Spare part number
AC adapter:
45-W HP Smart AC adapter, 7.4 mm, slim (non-PFC) 744893-001
45-W HP Smart AC adapter, 2 prong (non-PFC) 742437-001
65-W HP Smart AC adapter 693711-001
65-W HP Smart AC adapter for use in India 693710-001
Power cord (3-pin, black, 1.83-m):
For use in Argentina 490371-D01
For use in Australia 490371-011
For use in Brazil 490371-202
For use in Denmark 490371-081
For use in Europe 490371-021
For use in India 490371-D61
For use in Israel 490371-BB1
For use in Italy 490371-061
For use in Japan 490371-291
For use in North America 490371-001
For use in the People's Republic of China 490371-AA1
For use in South Africa 490371-AR1
For use in South Korea 490371-AD1
For use in Switzerland 490371-111
For use in Taiwan 490371-AB1
For use in Thailand 490371-201
22 Chapter 3 Illustrated parts catalog
Component Spare part number
For use in the United Kingdom and Singapore 490371-031
For use in the United States 490371-001
Power cord (3-pin, black, 1.0-m):
For use in Argentina 755530-D01
For use in Australia 755530-011
For use in Brazil 755530-202
For use in Denmark 755530-081
For use in Europe 755530-021
For use in India 755530-D61
For use in Israel 755530-BB1
For use in Italy 755530-061
For use in Japan 755530-291
For use in North America 755530-001
For use in the People's Republic of China 755530-AA1
For use in South Africa 755530-AR1
For use in South Korea 755530-AD1
For use in Switzerland 755530-111
For use in Taiwan 755530-AB1
For use in Thailand 755530-201
For use in the United Kingdom and Singapore 755530-031
For use in the United States 755530-001
Power cord (2-pin, black, 1.0-m):
For use in Japan 762689-291
DisplayPort to HDMI 1.4 adapter 749288-001
Screw Kit 702846-001
Pointing stick cover 750348-001
Docking station 732252-001
Cable lock docking station 575921-001
HP Ultraslim Keyed Cable Lock 703372-001
Essential Backpack 679923-001
HP Business Backpack 718548-001
HP Business Slim Load Top Case 718549-001
Essential Top Load Case 679921-001
Miscellaneous parts 23
4 Removal and replacement procedures
preliminary requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●Flat-bladed screw driver
●Magnetic screw driver
●Phillips P0 and P1 screw drivers
Service considerations
The following sections include some of the considerations that you must keep in mind during disassembly
and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all accompanying
screws) away from the work area to prevent damage.
Plastic parts
CAUTION: Using excessive force during disassembly and reassembly can damage plastic parts. Use care
when handling the plastic parts. Apply pressure only at the points designated in the
maintenance instructions.
Cables and connectors
CAUTION: When servicing the computer, be sure that cables are placed in their proper locations during the
reassembly process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat
the cables during removal and insertion. Handle cables by the connector whenever possible. In all cases, avoid
bending, twisting, or tearing cables. Be sure that cables are routed in such a way that they cannot be caught
or snagged by parts being removed or replaced. Handle ex cables with extreme care; these cables
tear easily.
24 Chapter 4 Removal and replacement procedures preliminary requirements
Drive handling
CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the
computer, damage to a drive, or loss of information, observe these precautions:
Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the computer is
o or in Hibernation, turn the computer on, and then shut it down through the operating system.
Before handling a drive, be sure that you are discharged of static electricity. While handling a drive, avoid
touching the connector.
Before removing a diskette drive or optical drive, be sure that a diskette or disc is not in the drive and be sure
that the optical drive tray is closed.
Handle drives on surfaces covered with at least one inch of shock-proof foam.
Avoid dropping drives from any height onto any surface.
After removing a hard drive, an optical drive, or a diskette drive, place it in a static-proof bag.
Avoid exposing an internal hard drive to products that have magnetic elds, such as monitors or speakers.
Avoid exposing a drive to temperature extremes or liquids.
If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective
packaging and label the package “FRAGILE.”
Grounding guidelines
Electrostatic discharge damage
Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure determine
the degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many
cases, ESD contains enough power to alter device parameters or melt silicon junctions.
A discharge of static electricity from a nger or other conductor can destroy static-sensitive devices or
microcircuitry. Even if the spark is neither felt nor heard, damage may have occurred.
An electronic device exposed to ESD may not be aected at all and can work perfectly throughout a normal
cycle. Or the device may function normally for a while, then degrade in the internal layers, reducing its
life expectancy.
CAUTION: To prevent damage to the computer when you are removing or installing internal components,
observe these precautions:
Keep components in their electrostatic-safe containers until you are ready to install them.
Before touching an electronic component, discharge static electricity by using the guidelines described in this
section.
Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
If you remove a component, place it in an electrostatic-safe container.
The following table shows how humidity aects the electrostatic voltage levels generated by
dierent activities.
CAUTION: A product can be degraded by as little as 700 V.
Grounding guidelines 25
Typical electrostatic voltage levels
Relative humidity
Event 10% 40% 55%
Walking across carpet 35,000 V 15,000 V 7,500 V
Walking across vinyl oor 12,000 V 5,000 V 3,000 V
Motions of bench worker 6,000 V 800 V 400 V
Removing DIPS from plastic tube 2,000 V 700 V 400 V
Removing DIPS from vinyl tray 11,500 V 4,000 V 2,000 V
Removing DIPS from Styrofoam 14,500 V 5,000 V 3,500 V
Removing bubble pack from PCB 26,500 V 20,000 V 7,000 V
Packing PCBs in foam-lined box 21,000 V 11,000 V 5,000 V
26 Chapter 4 Removal and replacement procedures preliminary requirements
Packaging and transporting guidelines
Follow these grounding guidelines when packaging and transporting equipment:
●To avoid hand contact, transport products in static-safe tubes, bags, or boxes.
●Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging.
●Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
●Place items on a grounded surface before removing items from their containers.
●Always be properly grounded when touching a component or assembly.
●Store reusable ESD-sensitive parts from assemblies in protective packaging or nonconductive foam.
●Use transporters and conveyors made of antistatic belts and roller bushings. Be sure that mechanized
equipment used for moving materials is wired to ground and that proper materials are selected to avoid
static charging. When grounding is not possible, use an ionizer to dissipate electric charges.
Workstation guidelines
Follow these grounding workstation guidelines:
●Cover the workstation with approved static-shielding material.
●Use a wrist strap connected to a properly grounded work surface and use properly grounded tools and
equipment.
●Use conductive eld service tools, such as cutters, screw drivers, and vacuums.
●When xtures must directly contact dissipative surfaces, use xtures made only of static-safe materials.
●Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids
and Styrofoam.
●Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle these
items only at static-free workstations.
●Avoid contact with pins, leads, or circuitry.
●Turn o power and input signals before inserting or removing connectors or test equipment.
Grounding guidelines 27
Equipment guidelines
Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.
●When seated, wear a wrist strap connected to a grounded system. Wrist straps are exible straps with a
minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap
snugly against the skin at all times. On grounded mats with banana-plug connectors, use alligator clips
to connect a wrist strap.
●When standing, use foot straps and a grounded oor mat. Foot straps (heel, toe, or boot straps) can be
used at standing workstations and are compatible with most types of shoes or boots. On conductive
oors or dissipative oor mats, use foot straps on both feet with a minimum of one megohm resistance
between the operator and ground. To be eective, the conductive must be worn in contact with the skin.
The following grounding equipment is recommended to prevent electrostatic damage:
●Antistatic tape
●Antistatic smocks, aprons, and sleeve protectors
●Conductive bins and other assembly or soldering aids
●Nonconductive foam
●Conductive tabletop workstations with ground cords of one megohm resistance
●Static-dissipative tables or oor mats with hard ties to the ground
●Field service kits
●Static awareness labels
●Material-handling packages
●Nonconductive plastic bags, tubes, or boxes
●Metal tote boxes
●Electrostatic voltage levels and protective materials
The following table lists the shielding protection provided by antistatic bags and oor mats.
Material Use Voltage protection level
Antistatic plastics Bags 1,500 V
Carbon-loaded plastic Floor mats 7,500 V
Metallized laminate Floor mats 5,000 V
28 Chapter 4 Removal and replacement procedures preliminary requirements
5 Removal and replacement procedures for
Customer Self-Repair parts
CAUTION: The Customer Self-Repair program is not available in all locations. Installing a part not supported
by the Customer Self-Repair program may void your warranty. Check your warranty to determine if Customer
Self-Repair is supported in your location.
NOTE: HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
follow the on-screen instructions.
Component replacement procedures
This chapter provides removal and replacement procedures for Customer Self-Repair parts.
There are as many as 14 screws that must be removed, replaced, or loosened when servicing Customer Self-
Repair parts. Make special note of each screw size and location during removal and replacement.
NOTE: Please read and follow the procedures described here to access and replace Customer Self-Repair
parts successfully.
NOTE: Details about your computer, including model, serial number, product key, and length of warranty,
are on the service tag at the bottom of your computer. See Illustrated parts catalog on page 16 for details.
Battery
Description Spare part number
4-cell, 52-Wh, 3.55-Ah, Li ion battery 687945-001
6-cell, 60-Wh, 2.7-Ah, Li ion travel battery 696621-001
Before disassembling the computer, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
Remove the battery:
1. Position the computer upside-down on a at surface.
2. Slide the battery release latch (1) to release the battery.
Component replacement procedures 29
3. Slide the battery outward (2), lift the outer edge of the battery (3), and then remove it from the
computer (3).
When installing the battery:
1. Insert the battery connector end of the battery into the bay, aligning it to the left edge.
2. Slide the battery into the bay until it drops and the latch snaps, and then slide the latch to the left to lock
the battery.
NOTE: In the locked position there will be no red color shown in the latch slot.
SIM
NOTE: This section applies only to computer models with WWAN capability.
NOTE: If there is a SIM inserted in the SIM slot, it must be removed before disassembling the computer. Be
sure that the SIM is reinserted in the SIM slot after reassembling the computer.
The SIM slot is located inside the battery bay on the right side.
Before removing the SIM, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 29).
Remove the SIM:
1. Press in on the SIM (1). (The module is partially ejected from the SIM slot.)
30 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
2. Remove the SIM (2) from the SIM slot.
Reverse this procedure to install the SIM.
Component replacement procedures 31
Hard drive cover
NOTE: The hard drive cover is available in the Plastics kit, spare part number 702877-001.
Description Spare part number
Plastics kit 702877-001
Before removing the hard drive cover, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 29).
Remove the hard drive cover:
1. Loosen the 2 captive hard drive cover screws (1).
2. Slide the hard drive cover away from the computer (2), and then lift the cover o the computer (3).
Reverse the removal procedures to install the hard drive cover.
32 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Hard drive/SSD drive
NOTE: The hard drive spare part kit does not include the hard drive bracket, connector, or screws.
The solid-state drive spare part kit includes the Hard Drive Hardware Kit, which includes the bracket,
connector, and screws..
Description Spare part number
Hard drive (does not include hard drive bracket or screws):
500-GB, 7200-rpm, 7-mm, SED 703268-001
500-GB, 7200-rpm, 7-mm 703267-001
Solid-state drive (includes bracket, connector, and screws):
256-GB, SATA III, self-encrypting drive (SED) 769716-001
240-GB, SATA III 769715-001
180-GB, SATA III 769714-001
128-GB, SATA III 769713-001
Hard Drive Hardware Kit (includes hard drive bracket, connector, and screws) 702870-001
Before removing the hard drive, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 29).
5. Remove the hard drive cover (see Hard drive cover on page 32).
Remove the hard drive:
1. Loosen the 4 captive hard drive screws (1) that secure the drive to the computer.
2. Pull the hard drive tab (2) upward to disconnect the hard drive.
Component replacement procedures 33
3. Lift the hard drive, and then pull the hard drive out of the hard drive bay.
4. If it is necessary to disassemble the hard drive, perform the following steps:
a. Remove the connector from the hard drive (1).
b. Remove the four Phillips PM3.0×4.0 screws (2) that secure the hard drive bracket to the hard drive.
c. Remove the hard drive bracket (3) from the hard drive. The hard drive bracket, connector, and
screws are available in the Hard Drive Hardware Kit, spare part number 702870-001.
Reverse this procedure to reassemble and install the hard drive.
34 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
mSATA drive
Description Spare part number
120-GB drive, M.2 769712-001
32-GB drive, M.2 769711-001
Before removing the mSATA drive follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 29).
5. Remove the hard drive cover (see Hard drive cover on page 32).
Remove the mSATA drive:
1. Remove the two Phillips PM2.0×3.0 screws (1) that secure the drive to the system board. (The drive tilts
up.)
Component replacement procedures 35
2. Remove the drive (2) by pulling it away from the slot at an angle.
NOTE: mSATA drives are designed with a notch to prevent incorrect insertion.
Reverse this procedure to install the mSATA drive.
36 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
RTC battery
Description Spare part number
RTC battery (includes cable and double-sided tape) 702853-001
Before removing the RTC battery, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 29).
5. Remove the hard drive cover (see Hard drive cover on page 32).
Remove the RTC battery:
1. Disconnect the RTC battery cable (1) from the system board.
2. Detach the RTC battery (2) from the computer.
3. Remove the RTC battery.
Reverse this procedure to install the RTC battery.
Component replacement procedures 37
Service cover
Description Spare part number
Service cover 704441-001
Service door (RCTO) 713547-001
Before removing the service cover, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 29).
5. Remove the hard drive cover (see Hard drive cover on page 32).
Remove the service cover:
1. Loosen the 5 captive Phillips screws (1) that secure the cover to the computer.
2. Tilt the door up from the computer slightly (2), and then lift the cover up and o the computer (3).
Reverse the removal procedures to install the service cover.
38 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Memory module
NOTE: Primary and expansion memory is installed in a stacked conguration in the bottom of the computer.
Description Spare part number
4-GB memory module (PC3L, 12800, 1600-MHz) 691740-001
8-GB memory module (PC3L, 12800, 1600-MHz) 693374-001
Update BIOS before adding memory modules
Before adding new memory, make sure you update the computer to the latest BIOS.
CAUTION: Failure to update the computer to the latest BIOS prior to installing new memory may result in
various system problems.
To update BIOS:
1. Navigate to www.hp.com.
2. Click Support & Drivers > Drivers & Software.
3. In the Enter a product name/number box, type the computer model information, and then click Search.
4. Click the link for the computer model.
5. Select the operating system, and then click Next.
6. Under Step 2: Select a Download, click the BIOS link.
7. Click the link for the most recent BIOS.
8. Click the Download button, and then follow the on-screen instructions.
Before removing a memory module, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 29).
5. Remove the hard drive cover (see Hard drive cover on page 32).
6. Remove the service cover Service cover on page 38).
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The edge of the module opposite the slot rises away from the computer.)
Component replacement procedures 39
2. Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE: Memory modules are designed with a notch to prevent incorrect insertion into the memory
module slot.
NOTE: The computer uses two memory slots. The top slot houses the expansion memory module and
the bottom slot houses the primary memory module.
Reverse this procedure to install a memory module.
40 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
WWAN module
NOTE: The WWAN module and the WLAN module are not interchangeable.
Description Spare part number
HP lt4112 LTE/HSPA+ Mobile Broadband Module 740011-001
HP lt4211 LTE/EV-DO/HSPA+ Gobi 4G Module 793116-001
HP hs3110 HSPA+ Mobile Broadband Module 822828-001
Before removing the WWAN module, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 29).
5. Remove the hard drive cover (see Hard drive cover on page 32).
6. Remove the service cover (see Service cover on page 38).
Remove the WWAN module:
1. Disconnect the WWAN antenna cables (1) from the terminals on the WWAN module.
NOTE: The red WWAN antenna cable is connected to the WWAN module “Main” terminal. The blue
WWAN antenna cable is connected to the WWAN module “Aux” terminal.
2. Remove the two Phillips PM2.0×3.0 screws (2) that secure the WWAN module to the system board. (The
WWAN module tilts up.)
Component replacement procedures 41
3. Remove the WWAN module (3) by pulling the module away from the slot at an angle.
NOTE: WWAN modules are designed with a notch to prevent incorrect insertion.
NOTE: If the WWAN antennas are not connected to the terminals on the WWAN module, the protective
sleeves must be installed on the antenna connectors, as shown in the following illustration.
Reverse this procedure to install the WWAN module.
42 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
WLAN module
Description Spare part number
Intel Dual Band Wireless-AC 7260 802.11 AC 2x2 WiFi + BT 4.0 Combo Adapter 710663-001
HP Intel Dual Band Wireless-N 7260AN 802.11 a/b/g/n (2x2) combination WiFi and Bluetooth 4.0 WLAN
module
717379-001
Intel Dual Band Wireless-N 7260AN 802.11 a/b/g/n (2x2) combination WiFi and Bluetooth 4.0 WLAN
module for use in Indonesia
747833-001
CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module
authorized for use in the computer by the governmental agency that regulates wireless devices in your
country or region. If you replace the module and then receive a warning message, remove the module to
restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 29).
5. Remove the hard drive cover (see Hard drive cover on page 32).
6. Remove the service cover (see Service cover on page 38).
Remove the WLAN module:
1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE: The WLAN antenna cable labeled “1” connects to the WLAN module “Main” terminal labeled “1”.
The WLAN antenna cable labeled “2” connects to the WLAN module “Aux” terminal labeled “2”. If the
computer is equipped with an 802.11a/b/g/n WLAN module, the yellow WLAN antenna cable connects to
the middle terminal on the WLAN module.
2. Remove the Phillips PM2.0×3.0 screw (2) that secures the WLAN module to the system board. (The
WLAN module tilts up.)
Component replacement procedures 43
3. Remove the WLAN module (3) by pulling the module away from the slot at an angle.
NOTE: WLAN modules are designed with a notch to prevent incorrect insertion.
NOTE: If the WLAN antennas are not connected to the terminals on the WLAN module, the protective
sleeves must be installed on the antenna connectors, as shown in the following illustration.
Reverse this procedure to install the WLAN module.
44 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Keyboard
In this section, the rst table provides the main spare part number for the keyboard. The second table
provides the country codes.
Description Spare part number
Keyboard 785648-xx1
For use in country
or region
Spare part
number
For use in country
or region
Spare part
number
For use in country
or region
Spare part
number
Belgium -A41 Israel -BB1 Slovenia -BA1
Brazil -201 Italy -061 South Korea -AD1
Bulgaria -261 Japan -291 Spain -071
Canada -DB1 Latin America -161 Sweden and Finland -B71
Czech Republic
and Slovakia
-FL1 The Netherlands -B31 Switzerland -BG1
Denmark -081 Northern Africa -FP1 Taiwan -AB1
France -051 Norway -091 Thailand -281
Germany -041 Portugal -131 Turkey -141
Greece -151 Romania -271 United Kingdom -031
Hungary -211 Russia -251 United States -001
Iceland -DD1 Saudi Arabia -171
India -D61
Before removing the keyboard, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 29).
5. Remove the hard drive cover (see Hard drive cover on page 32).
6. Remove the service cover (see Service cover on page 38).
Remove the keyboard:
1. Loosen the 4 captive Phillips screws that secure the keyboard to the computer.
Component replacement procedures 45
2. Rest and secure the computer on its right side.
3. Partially open the computer.
4. Insert a screw driver or similar thin tool into the keyboard release opening near the fan, and then press
on the back of the keyboard until the keyboard disengages from the computer.
5. Turn the computer right-side up with the front toward you.
46 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
6. Lift the rear edge of the keyboard (1), and then swing the keyboard up and forward (2) until it rests
upside down on the palm rest (3).
7. Release and disconnect the following connectors and cables:
●Release the pointing stick connector (1) and remove the cable (2).
●Release the large keyboard connector (3) and remove the cable (4).
●Release the small keyboard connector (5) and remove the cable (6).
Component replacement procedures 47
8. Remove the keyboard.
Reverse this procedure to install the keyboard.
48 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
6 Removal and replacement procedures for
Authorized Service Provider parts
CAUTION: Components described in this chapter should only be accessed by an authorized service provider.
Accessing these parts can damage the computer or void the warranty.
NOTE: HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
follow the on-screen instructions.
Component replacement procedures
This chapter provides removal and replacement procedures for Authorized Service Provider only parts.
There are as many as 53 screws that must be removed, replaced, or loosened when servicing Authorized
Service Provider only parts. Make special note of each screw size and location during removal and
replacement.
NOTE: Details about your computer, including model, serial number, product key, and length of warranty,
are on the service tag at the bottom of your computer. See Illustrated parts catalog on page 16 for details.
Component replacement procedures 49
Display assembly components (panel, bezel, webcam, microphone)
All display assemblies include WLAN antenna transceivers and cables. WWAN models also include 2 WWAN
antenna transceivers and cables.
Full hinge-up displays are not spared.
This section describes removing components that do not require that you entirely remove the display
assembly from the computer. You can remove the display bezel, webcam/microphone module, and display
panel with the display assembly still attached to the computer.
To remove the remaining display components, including the display brackets, antennas, and enclosure, you
must remove the entire display assembly from the computer. See Display assembly on page 67 for more
information about removing the remaining components.
Description Spare part number
Display panels
35.6-cm (14.0-in), HD+, anti-glare, LED 769722-001
35.6-cm (14.0-in), HD anti-glare, LED 769721-001
Display bezels
For use with models with a webcam 769705-001
For use with models without a webcam 769706-001
Webcam module with microphone 769710-001
Microphone module 702873-001
Before removing the display panel, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 29).
Remove the display assembly components:
1. Position the computer upright, with the front toward you.
2. Open the computer as far as possible.
3. If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a. Flex the inside edges of the bottom edge (1), the left and right sides (2), and the top edge (3) of
the display bezel until the bezel disengages from the display enclosure.
50 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
b. Remove the display bezel (4). The display bezel is available using spare part number 769705-001
on models with a webcam and 769706-001 on models without a webcam.
4. If it is necessary to replace the webcam/microphone module:
a. Detach the webcam/microphone module (1) from the display enclosure. (The webcam/microphone
module is attached to the display enclosure with double-sided tape.)
b. Disconnect the cable (2) from the webcam/microphone module.
c. Remove webcam/microphone module. The webcam module is available using spare part number
769710-001. The microphone module is available using spare part number 702873-001.
5. If it is necessary to replace the display panel:
a. Remove the four Phillips PM2.0×3.0 screws that secure the display panel to the display enclosure.
●769721-001 — 35.6-cm (14.0-in), LED, HD, AntiGlare display panel
●769722-001 — 35.6-cm (14.0-in), LED, HD+, AntiGlare display panel
Component replacement procedures 51
b. Rotate the top of the display panel downward (1).
c. Lift the tape that secure the display cable connector on the panel (2), and then disconnect the
cable (3) from the connector (4).
Reverse this procedure to reassemble and install the display assembly components.
52 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Base enclosure
Description Spare part number
Base enclosure 702863-001
Before removing the base enclosure, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 29), and then remove the following components:
a. Hard drive cover (see Hard drive cover on page 32)
b. Hard drive (see Hard drive/SSD drive on page 33)
c. Service cover (see Service cover on page 38)
d. Keyboard (see Keyboard on page 45)
Remove the base enclosure:
1. Close the computer and position it upside down.
2. Remove the WLAN (1) and WWAN (2) antennas from the routing path (3) in the base enclosure.
Component replacement procedures 53
3. Remove the 13 Torx PM2.0×5.0 screws that secure the base enclosure to the computer.
4. Remove the 7 Torx PM2.0×3.0 screws from the battery bay that secure the base enclosure to
the computer.
54 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
5. Lift the base enclosure (1) o the computer while threading the antenna cables through the hole in the
base enclosure (2).
Reverse this procedure to install the base enclosure.
Touchpad
Before removing the touchpad, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 29), and then remove the following components:
a. Hard drive cover (see Hard drive cover on page 32)
b. Hard drive (see Hard drive/SSD drive on page 33)
c. Service cover (see Service cover on page 38)
d. Keyboard (see Keyboard on page 45)
e. Base enclosure (see Base enclosure on page 53)
Remove the touchpad:
1. Remove the 2 Phillips PM2.0×3.0 screws (1) that secure the touchpad to the computer.
Component replacement procedures 55
2. Lift the touchpad from the computer (2).
3. Remove the touchpad.
Reverse this procedure to install the touchpad.
NOTE: When replacing the touchpad, make sure to install the screws into holes closer to the edge of
computer.
56 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Power connector
Description Spare part number
Power connector 702875-001
Before removing the power connector, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 29), and then remove the following components:
a. Hard drive cover (see Hard drive cover on page 32)
b. Hard drive (see Hard drive/SSD drive on page 33)
c. Service cover (see Service cover on page 38)
d. Keyboard (see Keyboard on page 45)
e. Base enclosure (see Base enclosure on page 53)
Remove the power connector:
1. Position the base enclosure with the front toward you.
2. Disconnect the power connector cable from the system board (1).
3. Lift the power connector from the computer (2).
4. Remove the power connector.
Reverse this procedure to install the power connector.
Component replacement procedures 57
Fan
Description Spare part number
Fan (includes cable) 702859-001
Before removing the fan, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 29).
a. Hard drive cover (see Hard drive cover on page 32)
b. Hard drive (see Hard drive/SSD drive on page 33)
c. Service cover (see Service cover on page 38)
d. Keyboard (see Keyboard on page 45)
e. Base enclosure (see Base enclosure on page 53)
Remove the fan:
1. Disconnect the fan cable (1) from the system board.
2. Loosen the 2 captive Phillips screws (2) that secure the fan to the top cover.
3. Remove the fan (3).
Reverse this procedure to install the fan.
58 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
System board
NOTE: The system board spare part kit includes replacement thermal material.
All system boards use the following part numbers:
xxxxxx-001: Windows 7 or non-Windows operating systems
xxxxxx-501: Windows 8.1 Standard operating system
xxxxxx-601: Windows 8.1 or Windows 10 operating system
Description Spare part number
Intel Core i7-4650U processor 769720-xxx
Intel Core i7-4600U processor 769719-xxx
Intel Core i5-4310U processor 769718-xxx
Intel Core i5-4210U processor 769717-xxx
Before removing the system board, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 29), and then remove the following components:
a. Hard drive cover (see Hard drive cover on page 32)
b. Hard drive (see Hard drive/SSD drive on page 33)
c. Service cover (see Service cover on page 38)
d. Fan (see Fan on page 58)
e. Keyboard (see Keyboard on page 45)
f. Base enclosure (see Base enclosure on page 53)
NOTE: When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●SIM (see SIM on page 30, if applicable)
●Memory module (see Memory module on page 39)
●WWAN module (see WWAN module on page 41)
●WLAN module (see WLAN module on page 43)
●Heat sink (see Heat sink on page 62)
Remove the system board:
1. Disconnect the following cables:
●(1): Right speaker cable
●(2): Display panel
Component replacement procedures 59
●(3): Left speaker cable
●(4): Touchpad
●(5): Smart card reader
2. Remove the 2 Phillips PM2.0×4.0 screws that secure the system board to the computer.
3. Lift the left side of the system board up at an angle (1).
60 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
4. Pull the system board away from and out of the computer (2), making sure the connectors on the right
side of the board (3) are clear of the computer.
NOTE: To avoid breaking the board, support the right side of the system board near the heat sink (3)
as you lift it up and out of the computer.
Reverse this procedure to install the system board.
Component replacement procedures 61
Heat sink
NOTE: The heat sink spare part kit includes replacement thermal material.
Description Spare part number
Heat sink 769708-001
Before removing the heat sink, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 29), and then remove the following components:
a. Hard drive cover (see Hard drive cover on page 32)
b. Hard drive (see Hard drive/SSD drive on page 33)
c. Service cover (see Service cover on page 38)
d. WLAN module (see WLAN module on page 43)
e. WWAN module (see WWAN module on page 41)
f. Fan (see Fan on page 58)
g. Keyboard (see Keyboard on page 45)
h. Base enclosure (see Base enclosure on page 53)
i. System board (see System board on page 59)
Remove the heat sink:
1. Following the 1, 2, 3, 4 sequence stamped into the heat sink, loosen the four captive Philllips screws (1)
that secure the heat sink to the system board.
62 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
2. Remove the heat sink (2).
NOTE: The thermal material must be thoroughly cleaned from the surfaces of the heat sink and the
system board components each time the heat sink is removed. Replacement thermal material is
included with the heat sink, processor, and system board spare part kits.
The following illustration shows the replacement thermal material locations. Thermal paste is used on
the heat sink (1) and the processor (2).
Reverse this procedure to install the heat sink.
Component replacement procedures 63
Speaker assembly
Description Spare part number
Speaker assembly (includes cable) 702869-001
Before removing the speaker assembly, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 29), and then remove the following components:
a. Hard drive cover (see Hard drive cover on page 32)
b. Hard drive (see Hard drive/SSD drive on page 33)
c. Service cover (see Service cover on page 38)
d. Keyboard (see Keyboard on page 45)
e. Base enclosure (see Base enclosure on page 53)
f. Fan (see Fan on page 58)
g. System board (see System board on page 59)
Remove the speaker assembly:
1. Remove the 2 Phillips PM2.0×3.0 screws (1) that secure each speaker to the computer.
2. Remove the speakers (2) from the computer.
Reverse this procedure to install the speakers.
64 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Smart card board
Description Spare part number
Smart card board (includes cable) 769707-001
Before removing the smart card reader, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 29).
a. Hard drive cover (see Hard drive cover on page 32)
b. Hard drive (see Hard drive/SSD drive on page 33)
c. Service cover (see Service cover on page 38)
d. Keyboard (see Keyboard on page 45)
e. Base enclosure (see Base enclosure on page 53)
f. Fan (see Fan on page 58)
g. System board (see System board on page 59)
Remove the smart card board:
1. Remove the Phillips PM2.0×2.5 broadhead screw (1) that secures the board to the computer.
2. Rotate the board upward (2) at an angle, and then remove it from the computer (3).
Reverse the removal procedures to install the smart card board.
Component replacement procedures 65
Fingerprint reader board
Description Spare part number
Fingerprint reader board (includes cable) 702845-001
Before removing the ngerprint reader board, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 29), and then remove the following components:
a. Hard drive cover (see Hard drive cover on page 32)
b. Hard drive (see Hard drive/SSD drive on page 33)
c. Service cover (see Service cover on page 38)
d. Keyboard (see Keyboard on page 45)
e. Base enclosure (see Base enclosure on page 53)
f. Fan (see Fan on page 58)
g. System board (see System board on page 59)
Remove the ngerprint reader board:
1. Position the system board upside down.
2. Disconnect the ngerprint reader board cable from the system board connector, and then remove the
assembly.
3. Remove the ngerprint reader board and cable.
Reverse this procedure to install the ngerprint reader board.
66 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Display assembly
This section describes removing components that require you to completely remove the display panel. For
more information about removing display components that do not require that you remove the assembly
from the computer, see Display assembly components (panel, bezel, webcam, microphone) on page 50.
NOTE: The display assembly is spared at the subcomponent level only.
Before removing the display assembly, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 29), and then remove the following components:
a. Hard drive cover (see Hard drive cover on page 32)
b. Hard drive (see Hard drive/SSD drive on page 33)
c. Service cover (see Service cover on page 38)
d. WLAN module (see WLAN module on page 43)
e. WWAN module (see WWAN module on page 41)
f. Fan (see Fan on page 58)
g. Keyboard (see Keyboard on page 45)
h. Base enclosure (see Base enclosure on page 53)
Remove the display assembly:
1. Disconnect the display panel cable (1) from the system board.
2. Release the display panel cable from the routing channel (2).
3. Open the computer and position it with the base enclosure on a table and the display hanging down.
Component replacement procedures 67
NOTE: Be sure to support the display when removing the screws.
4. Remove the four Phillips PM2.5×4.0 screws (1) that secure the display assembly to the computer.
5. Remove the display assembly from the top cover (2).
6. To remove the display bezel:
a. Flex the inside edges of the bottom edge (1), the left and right sides (2), and the top edge (3) of
the display bezel until the bezel disengages from the display enclosure.
b. Remove the display bezel (4). The display bezel is available using spare part number 769705-001
on models with a webcam and 769706-001 on models without a webcam.
NOTE: For this procedure the display will not be connected to the computer as shown in the
following image.
68 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
7. To remove the display panel:
NOTE: For this procedure the display will not be connected to the computer as shown in the following
images.
a. Remove the four Phillips PM2.0×3.0 screws that secure the display panel to the display enclosure.
Display panels are available using the following spare part numbers:
●769721-001 — 35.6-cm (14.0-in), LED, HD, AntiGlare display panel
●769722-001 — 35.6-cm (14.0-in), LED, HD+, AntiGlare display panel
b. Rotate the top of the display panel downward (1).
Component replacement procedures 69
c. Lift the tape that secure the display cable connector on the panel (2), and then disconnect the
cable (3) from the connector (4).
NOTE: For this procedure the display will not be connected to the computer as shown in the
following image.
8. If it is necessary to replace the display hinges:
Display hinge covers and hinges are available in the Display Hinge Kit, spare part number 702857-001.
a. Remove the Phillips broadhead PM2.0×2.5 screw (1) that secures each hinge cover to the
display enclosure.
b. Remove the display hinge covers (2) from atop the hinges.
70 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
c. Remove the 2 broadhead Phillips PM2.0×2.5 screws (1) that secure each display hinge to the
display enclosure.
d. Lift the display hinges o the display enclosure (2).
9. If it is necessary to replace the WLAN antenna cables and transceivers:
WLAN and WWAN antennas are available in the Antenna Kit, spare part number 769704-001.
a. Release the WLAN antenna transceivers (1) from the clips built into the display enclosure. (The
WLAN antenna transceivers are attached to the display enclosure with double-sided tape.)
b. Detach the WLAN antenna cables from the routing channels (2) built into the display enclosure.
c. Remove the WLAN antenna cables and transceivers. The WLAN antenna cables and transceivers are
included in the Antenna Kit, spare part number 769704-001.
Component replacement procedures 71
10. If it is necessary to replace the WWAN antenna cables and transceivers:
WLAN and WWAN antennas are available in the Antenna Kit, spare part number 769704-001.
a. Release the WWAN antenna transceivers (1) from the clips built into the display enclosure. (The
WWAN antenna transceivers are attached to the display enclosure with double-sided tape.)
b. Detach the WWAN antenna cables from the routing channels (2) built into the display enclosure.
c. Remove the WWAN antenna cables and transceivers. The WWAN antenna cables and transceivers
are included in the Antenna Kit, spare part number 769704-001.
Reverse this procedure to reassemble and install the display assembly.
72 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
7 Computer Setup (BIOS) and MultiBoot in
Windows 7
Using Computer Setup
Computer Setup, or Basic Input/Output System (BIOS), controls communication between all the input and
output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Computer Setup
includes settings for the types of devices installed, the startup sequence of the computer, and the amount of
system and extended memory.
NOTE: Use extreme care when making changes in Computer Setup. Errors can prevent the computer from
operating properly.
Starting Computer Setup
NOTE: An external keyboard or mouse connected to a USB port can be used with Computer Setup only if USB
legacy support is enabled.
To start Computer Setup, follow these steps:
1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu”
message is displayed at the bottom of the screen.
2. Press f10 to enter Computer Setup.
Navigating and selecting in Computer Setup
To navigate and select in Computer Setup, follow these steps:
1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu”
message is displayed at the bottom of the screen.
NOTE: You can use either a pointing device (TouchPad, pointing stick, or USB mouse) or the keyboard
to navigate and make selections in Computer Setup.
2. Press f10 to enter Computer Setup.
●To select a menu or a menu item, use the tab key and the keyboard arrow keys and then press
enter, or use a pointing device to click the item.
●To scroll up and down, click the up arrow or the down arrow in the upper-right corner of the screen,
or use the up arrow key or the down arrow key on the keyboard.
●To close open dialog boxes and return to the main Computer Setup screen, press esc, and then
follow the on-screen instructions.
To exit Computer Setup menus, choose one of the following methods:
●To exit Computer Setup menus without saving your changes:
Click the Exit icon in the lower-right corner of the screen, and then follow the on-screen instructions.
– or –
Using Computer Setup 73
Use the arrow keys to select Main > Ignore Changes and Exit, and then press enter.
●To save your changes and exit Computer Setup menus:
Click the Save icon in the lower-right corner of the screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select Main > Save Changes and Exit, and then press enter.
Your changes go into eect when the computer restarts.
Restoring factory settings in Computer Setup
NOTE: Restoring defaults will not change the hard drive mode.
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu”
message is displayed at the bottom of the screen.
2. Press f10 to enter Computer Setup.
3. Use a pointing device or the arrow keys to select Main > Restore Defaults.
4. Follow the on-screen instructions.
5. To save your changes and exit, click the Save icon in the lower-right corner of the screen, and then
follow the on-screen instructions.
– or –
Use the arrow keys to select Main > Save Changes and Exit, and then press enter.
Your changes go into eect when the computer restarts.
NOTE: Your password settings and security settings are not changed when you restore the factory settings.
Updating the BIOS
Updated versions of the BIOS may be available on the HP website.
Most BIOS updates on the HP website are packaged in compressed les called SoftPaqs.
Some download packages contain a le named Readme.txt, which contains information regarding installing
and troubleshooting the le.
Determining the BIOS version
To determine whether available BIOS updates contain later BIOS versions than those currently installed on the
computer, you need to know the version of the system BIOS currently installed.
BIOS version information (also known as ROM date and System BIOS) can be revealed by pressing fn+esc (if
you are already in Windows) or by using Computer Setup.
1. Start Computer Setup.
2. Use a pointing device or the arrow keys to select Main > System Information.
3. To exit Computer Setup without saving your changes, click the Exit icon in the lower-right corner of the
screen, and then follow the on-screen instructions.
– or –
74 Chapter 7 Computer Setup (BIOS) and MultiBoot in Windows 7
Use the arrow keys to select Main > Ignore Changes and Exit, and then press enter.
Downloading a BIOS update
CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, download and
install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do
not download or install a BIOS update while the computer is running on battery power, docked in an optional
docking device, or connected to an optional power source. During the download and installation, follow these
instructions:
Do not disconnect power on the computer by unplugging the power cord from the AC outlet.
Do not shut down the computer or initiate Sleep.
Do not insert, remove, connect, or disconnect any device, cable, or cord.
1. Access Help and Support by selecting Start > Help and Support.
2. Select Updates and tune-ups, and then select Check for HP updates now.
3. At the download area, follow these steps:
a. Identify the most recent BIOS update and compare it to the BIOS version currently installed on your
computer. Make a note of the date, name, or other identier. You may need this information to
locate the update later, after it has been downloaded to your hard drive.
b. Follow the on-screen instructions to download your selection to the hard drive.
If the update is more recent than your BIOS, make a note of the path to the location on your hard
drive where the BIOS update is downloaded. You will need to access this path when you are ready
to install the update.
NOTE: If you connect your computer to a network, consult the network administrator before installing
any software updates, especially system BIOS updates.
BIOS installation procedures vary. Follow any instructions that are revealed on the screen after the download
is complete. If no instructions are revealed, follow these steps:
1. Select Start > Computer.
2. Click your hard drive designation. The hard drive designation is typically Local Disk (C:).
3. Using the hard drive path you recorded earlier, open the folder on your hard drive that contains the
update.
4. Double-click the le that has an .exe extension (for example, lename.exe).
The BIOS installation begins.
5. Complete the installation by following the on-screen instructions.
NOTE: After a message on the screen reports a successful installation, you can delete the downloaded le
from your hard drive.
Using MultiBoot
About the boot device order
As the computer starts, the system attempts to boot from enabled devices. The MultiBoot utility, which is
enabled at the factory, controls the order in which the system selects a boot device. Boot devices can include
Using MultiBoot 75
optical drives, diskette drives, a network interface card (NIC), hard drives, and USB devices. Boot devices
contain bootable media or les that the computer needs to start and operate properly.
NOTE: Some boot devices must be enabled in Computer Setup before they can be included in the boot order.
You can change the order in which the computer searches for a boot device by changing the boot order in
Computer Setup. You can also press esc while the “Press the ESC key for Startup Menu” message is displayed
at the bottom of the screen, and then press f9. Pressing f9 displays a menu that shows the current boot
devices and allows you to select a boot device. Or, you can use MultiBoot Express to set the computer to
prompt you for a boot location each time the computer turns on or restarts.
Choosing MultiBoot preferences
You can use MultiBoot in the following ways:
●To set a new boot order that the computer uses each time it is turned on, by changing the boot order in
Computer Setup.
●To dynamically choose the boot device, by pressing esc while the “Press the ESC key for Startup Menu”
message is displayed at the bottom of the screen, and then pressing f9 to enter the Boot Device Options
menu.
●To use MultiBoot Express to set variable boot orders. This feature prompts you for a boot device each
time the computer is turned on or restarted.
Setting a new boot order in Computer Setup
To start Computer Setup and set a boot device order that the computer uses each time it is turned on or
restarted, follow these steps:
1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu”
message is displayed at the bottom of the screen.
2. Press f10 to enter Computer Setup.
3. Use a pointing device or the arrow keys to select the Legacy Boot Order list, and then press enter.
4. To move the device up in the boot order, use a pointing device to click the up arrow, or press the + key.
– or –
To move the device down in the boot order, use a pointing device to click the down arrow, or press the -
key.
5. To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of the screen,
and then follow the on-screen instructions.
– or –
Use the arrow keys to select Main > Save Changes and Exit, and then press enter.
Dynamically choosing a boot device using the f9 prompt
To dynamically choose a boot device for the current startup sequence, follow these steps:
1. Open the Select Boot Device menu by turning on or restarting the computer, and then pressing esc while
the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen.
2. Press f9.
3. Use a pointing device or the arrow keys to select a boot device, then press enter.
76 Chapter 7 Computer Setup (BIOS) and MultiBoot in Windows 7
Setting a MultiBoot Express prompt
To start Computer Setup and set the computer to display the MultiBoot startup location menu each time the
computer is started or restarted, follow these steps:
1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu”
message is displayed at the bottom of the screen.
2. Press f10 to enter Computer Setup.
3. Use a pointing device or the arrow keys to select System Conguration > Boot Options, and then press
enter.
4. In the MultiBoot Express Popup Delay (Sec) eld, enter the length of time in seconds that you want the
computer to display the startup location menu before it defaults to the current MultiBoot setting. (When
0 is selected, the Express Boot startup location menu is not displayed.)
5. To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of the screen,
and then follow the on-screen instructions.
– or –
Use the arrow keys to select Main > Save Changes and Exit, and then press enter.
Your changes go into eect when the computer restarts.
Entering MultiBoot Express preferences
When the Express Boot menu is displayed during startup, you have the following choices:
●To specify a boot device from the Express Boot menu, select your preference within the allotted time,
and then press enter.
●To prevent the computer from defaulting to the current MultiBoot setting, press any key before the
allotted time expires. The computer will not start until you select a boot device and press enter.
●To allow the computer to start according to the current MultiBoot settings, wait for the allotted time to
expire.
Using MultiBoot 77
8 Computer Setup (BIOS) and MultiBoot in
Windows 8
Using Computer Setup
Computer Setup, or Basic Input/Output System (BIOS), controls communication between all the input and
output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Computer Setup
includes settings for the types of devices installed, the startup sequence of the computer, and the amount of
system and extended memory.
NOTE: Use extreme care when making changes in Computer Setup. Errors can prevent the computer from
operating properly.
Starting Computer Setup
NOTE: An external keyboard or mouse connected to a USB port can be used with Computer Setup only if USB
legacy support is enabled.
To start Computer Setup, follow these steps:
1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu”
message is displayed at the bottom of the screen.
2. Press f10 to enter Computer Setup.
Navigating and selecting in Computer Setup
To navigate and select in Computer Setup, follow these steps:
1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu”
message is displayed at the bottom of the screen.
NOTE: You can use either a pointing device (TouchPad, pointing stick, or USB mouse) or the keyboard
to navigate and make selections in Computer Setup.
2. Press f10 to enter Computer Setup.
●To select a menu or a menu item, use the tab key and the keyboard arrow keys and then press
enter, or use a pointing device to click the item.
●To scroll up and down, click the up arrow or the down arrow in the upper-right corner of the screen,
or use the up arrow key or the down arrow key on the keyboard.
●To close open dialog boxes and return to the main Computer Setup screen, press esc, and then
follow the on-screen instructions.
To exit Computer Setup menus, choose one of the following methods:
●To exit Computer Setup menus without saving your changes:
Click the Exit icon in the lower-right corner of the screen, and then follow the on-screen instructions.
– or –
78 Chapter 8 Computer Setup (BIOS) and MultiBoot in Windows 8
Use the arrow keys to select Main > Ignore Changes and Exit, and then press enter.
●To save your changes and exit Computer Setup menus:
Click the Save icon in the lower-right corner of the screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select Main > Save Changes and Exit, and then press enter.
Your changes go into eect when the computer restarts.
Restoring factory settings in Computer Setup
NOTE: Restoring defaults will not change the hard drive mode.
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu”
message is displayed at the bottom of the screen.
2. Press f10 to enter Computer Setup.
3. Use a pointing device or the arrow keys to select Main > Restore Defaults.
4. Follow the on-screen instructions.
5. To save your changes and exit, click the Save icon in the lower-right corner of the screen, and then
follow the on-screen instructions.
– or –
Use the arrow keys to select Main > Save Changes and Exit, and then press enter.
Your changes go into eect when the computer restarts.
NOTE: Your password settings and security settings are not changed when you restore the factory settings.
Updating the BIOS
Updated versions of the BIOS may be available on the HP website.
Most BIOS updates on the HP website are packaged in compressed les called SoftPaqs.
Some download packages contain a le named Readme.txt, which contains information regarding installing
and troubleshooting the le.
Determining the BIOS version
To determine whether available BIOS updates contain later BIOS versions than those currently installed on the
computer, you need to know the version of the system BIOS currently installed.
BIOS version information (also known as ROM date and System BIOS) can be revealed by pressing fn+esc (if
you are already in Windows) or by using Computer Setup.
1. Start Computer Setup.
2. Use a pointing device or the arrow keys to select Main > System Information.
3. To exit Computer Setup without saving your changes, click the Exit icon in the lower-right corner of the
screen, and then follow the on-screen instructions.
– or –
Using Computer Setup 79
Use the arrow keys to select Main > Ignore Changes and Exit, and then press enter.
Downloading a BIOS update
CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, download and
install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do
not download or install a BIOS update while the computer is running on battery power, docked in an optional
docking device, or connected to an optional power source. During the download and installation, follow these
instructions:
Do not disconnect power on the computer by unplugging the power cord from the AC outlet.
Do not shut down the computer or initiate Sleep.
Do not insert, remove, connect, or disconnect any device, cable, or cord.
1. From the Start screen, type hp support assistant, and then select the HP Support Assistant app.
2. Click Updates and tune-ups, and then click Check for HP updates now.
3. Follow the on-screen instructions.
4. At the download area, follow these steps:
a. Identify the most recent BIOS update and compare it to the BIOS version currently installed on your
computer. Make a note of the date, name, or other identier. You may need this information to
locate the update later, after it has been downloaded to your hard drive.
b. Follow the on-screen instructions to download your selection to the hard drive.
If the update is more recent than your BIOS, make a note of the path to the location on your hard
drive where the BIOS update is downloaded. You will need to access this path when you are ready
to install the update.
NOTE: If you connect your computer to a network, consult the network administrator before installing
any software updates, especially system BIOS updates.
BIOS installation procedures vary. Follow any instructions that are revealed on the screen after the download
is complete. If no instructions are revealed, follow these steps:
1. From the Start screen, type file, and then select File Explorer.
2. Click your hard drive designation. The hard drive designation is typically Local Disk (C:).
3. Using the hard drive path you recorded earlier, open the folder on your hard drive that contains the
update.
4. Double-click the le that has an .exe extension (for example, lename.exe).
The BIOS installation begins.
5. Complete the installation by following the on-screen instructions.
NOTE: After a message on the screen reports a successful installation, you can delete the downloaded le
from your hard drive.
80 Chapter 8 Computer Setup (BIOS) and MultiBoot in Windows 8
Using MultiBoot
About the boot device order
As the computer starts, the system attempts to boot from enabled devices. The MultiBoot utility, which is
enabled at the factory, controls the order in which the system selects a boot device. Boot devices can include
optical drives, diskette drives, a network interface card (NIC), hard drives, and USB devices. Boot devices
contain bootable media or les that the computer needs to start and operate properly.
NOTE: Some boot devices must be enabled in Computer Setup before they can be included in the boot order.
You can change the order in which the computer searches for a boot device by changing the boot order in
Computer Setup. You can also press esc while the “Press the ESC key for Startup Menu” message is displayed
at the bottom of the screen, and then press f9. Pressing f9 displays a menu that shows the current boot
devices and allows you to select a boot device. Or, you can use MultiBoot Express to set the computer to
prompt you for a boot location each time the computer turns on or restarts.
Choosing MultiBoot preferences
You can use MultiBoot in the following ways:
●To set a new boot order that the computer uses each time it is turned on, by changing the boot order in
Computer Setup.
●To dynamically choose the boot device, by pressing esc while the “Press the ESC key for Startup Menu”
message is displayed at the bottom of the screen, and then pressing f9 to enter the Boot Device Options
menu.
●To use MultiBoot Express to set variable boot orders. This feature prompts you for a boot device each
time the computer is turned on or restarted.
Setting a new boot order in Computer Setup
To start Computer Setup and set a boot device order that the computer uses each time it is turned on or
restarted, follow these steps:
1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu”
message is displayed at the bottom of the screen.
2. Press f10 to enter Computer Setup.
3. Use a pointing device or the arrow keys to select one of the following options:
●Advanced > Boot Options > UEFI Boot Order > UEFI Hybrid
●Advanced > Boot Options > UEFI Boot Order > UEFI Native Boot mode
●Advanced > Boot Options > Legacy Boot Order > Legacy Boot Mode
Press enter.
4. To move the device up in the boot order, use a pointing device to click the up arrow, or press the + key.
– or –
Using MultiBoot 81
To move the device down in the boot order, use a pointing device to click the down arrow, or press the -
key.
5. To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of the screen,
and then follow the on-screen instructions.
– or –
Use the arrow keys to select Main > Save Changes and Exit, and then press enter.
Dynamically choosing a boot device using the f9 prompt
To dynamically choose a boot device for the current startup sequence, follow these steps:
1. Open the Select Boot Device menu by turning on or restarting the computer, and then pressing esc while
the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen.
2. Press f9.
3. Use a pointing device or the arrow keys to select a boot device, then press enter.
Setting a MultiBoot Express prompt
To start Computer Setup and set the computer to display the MultiBoot startup location menu each time the
computer is started or restarted, follow these steps:
1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu”
message is displayed at the bottom of the screen.
2. Press f10 to enter Computer Setup.
3. Use a pointing device or the arrow keys to select Advanced > Boot Options > MultiBoot Express Boot
Popup Delay (Sec), and then press enter.
4. In the MultiBoot Express Popup Delay (Sec) eld, enter the length of time in seconds that you want the
computer to display the startup location menu before it defaults to the current MultiBoot setting. (When
0 is selected, the Express Boot startup location menu is not displayed.)
5. To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of the screen,
and then follow the on-screen instructions.
– or –
Use the arrow keys to select Main > Save Changes and Exit, and then press enter.
Your changes go into eect when the computer restarts.
Entering MultiBoot Express preferences
When the Express Boot menu is displayed during startup, you have the following choices:
●To specify a boot device from the Express Boot menu, select your preference within the allotted time,
and then press enter.
●To prevent the computer from defaulting to the current MultiBoot setting, press any key before the
allotted time expires. The computer will not start until you select a boot device and press enter.
●To allow the computer to start according to the current MultiBoot settings, wait for the allotted time to
expire.
82 Chapter 8 Computer Setup (BIOS) and MultiBoot in Windows 8
9 Computer Setup (BIOS), TPM, and HP Sure
Start in Windows 10
Using Computer Setup
Computer Setup, or Basic Input/Output System (BIOS), controls communication between all the input and
output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Computer Setup
includes settings for the types of devices installed, the startup sequence of the computer, and the amount of
system and extended memory.
NOTE: Use extreme care when making changes in Computer Setup. Errors can prevent the computer from
operating properly.
Starting Computer Setup
NOTE: An external keyboard or mouse connected to a USB port can be used with Computer Setup only if USB
legacy support is enabled.
To start Computer Setup, follow these steps:
▲Start Computer Setup.
●Computers or tablets with keyboards:
▲Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer
Setup.
●Tablets without keyboards:
▲Turn o the tablet. Press the power button in combination with the volume down button until
the Startup menu is displayed, and then tap F10 to enter Computer Setup.
Navigating and selecting in Computer Setup
●To select a menu or a menu item, use the tab key and the keyboard arrow keys and then press enter, or
use a pointing device to select the item.
NOTE: On tablets without keyboards, you can use your nger to make selections.
●To scroll up and down, select the up arrow or the down arrow in the upper-right corner of the screen, or
use the up arrow key or the down arrow key on the keyboard.
●To close open dialog boxes and return to the main Computer Setup screen, press esc, and then follow
the on-screen instructions.
Using Computer Setup 83
To exit Computer Setup menus, choose one of the following methods:
●To exit Computer Setup menus without saving your changes:
Select the Exit icon in the lower-right corner of the screen, and then follow the on-screen instructions.
– or –
Select Main, select Ignore Changes and Exit, and then press enter.
●To save your changes and exit Computer Setup menus:
Select the Save icon in the lower-right corner of the screen, and then follow the on-screen instructions.
– or –
Select Main, select Save Changes and Exit, and then press enter.
Your changes go into eect when the computer restarts.
Restoring factory settings in Computer Setup
NOTE: Restoring defaults will not change the hard drive mode.
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1. Start Computer Setup. See Starting Computer Setup on page 83.
2. Select Main, and then select Apply Factory Defaults and Exit.
NOTE: On select products, the selections may display Restore Defaults instead of Apply Factory
Defaults and Exit.
3. Follow the on-screen instructions.
4. To save your changes and exit, select the Save icon in the lower-right corner of the screen, and then
follow the on-screen instructions.
– or –
Select Main, select Save Changes and Exit, and then press enter.
Your changes go into eect when the computer restarts.
NOTE: Your password settings and security settings are not changed when you restore the factory settings.
84 Chapter 9 Computer Setup (BIOS), TPM, and HP Sure Start in Windows 10
Updating the BIOS
Updated versions of the BIOS may be available on the HP website.
Most BIOS updates on the HP website are packaged in compressed les called SoftPaqs.
Some download packages contain a le named Readme.txt, which contains information regarding installing
and troubleshooting the le.
Determining the BIOS version
To decide whether you need to update Computer Setup (BIOS), rst determine the BIOS version on your
computer.
BIOS version information (also known as ROM date and System BIOS) can be accessed by pressing fn+esc (if
you are already in Windows) or by using Computer Setup.
1. Start Computer Setup. See Starting Computer Setup on page 83.
2. Select Main, and then select System Information.
3. To exit Computer Setup without saving your changes, select the Exit icon in the lower-right corner of the
screen, and then follow the on-screen instructions.
– or –
Select Main, select Ignore Changes and Exit, and then press enter.
To check for later BIOS versions, see Downloading a BIOS update on page 85.
Downloading a BIOS update
CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, download and
install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do
not download or install a BIOS update while the computer is running on battery power, docked in an optional
docking device, or connected to an optional power source. During the download and installation, follow these
instructions:
Do not disconnect power on the computer by unplugging the power cord from the AC outlet.
Do not shut down the computer or initiate Sleep.
Do not insert, remove, connect, or disconnect any device, cable, or cord.
1. Type support in the taskbar search box, and then select the HP Support Assistant app.
– or –
Select the question mark icon in the taskbar.
2. Select Updates, and then select Check for updates and messages.
3. Follow the on-screen instructions.
4. At the download area, follow these steps:
a. Identify the most recent BIOS update and compare it to the BIOS version currently installed on your
computer. Make a note of the date, name, or other identier. You may need this information to
locate the update later, after it has been downloaded to your hard drive.
b. Follow the on-screen instructions to download your selection to the hard drive.
Make a note of the path to the location on your hard drive where the BIOS update is downloaded.
You will need to access this path when you are ready to install the update.
Using Computer Setup 85
NOTE: If you connect your computer to a network, consult the network administrator before installing
any software updates, especially system BIOS updates.
BIOS installation procedures vary. Follow any instructions that are revealed on the screen after the download
is complete. If no instructions are revealed, follow these steps:
1. Type file in the taskbar search box, and then select File Explorer.
2. Select your hard drive designation. The hard drive designation is typically Local Disk (C:).
3. Using the hard drive path you recorded earlier, open the folder that contains the update.
4. Double-click the le that has an .exe extension (for example, lename.exe).
The BIOS installation begins.
5. Complete the installation by following the on-screen instructions.
NOTE: After a message on the screen reports a successful installation, you can delete the downloaded le
from your hard drive.
Changing the boot order using the f9 prompt
To dynamically choose a boot device for the current startup sequence, follow these steps:
1. Access the Boot Device Options menu:
●Computers or tablets with keyboards:
▲Turn on or restart the computer, and when the HP logo appears, press f9 to enter the Boot
Device Options menu.
●Tablets without keyboards:
▲Turn o the tablet. Press the power button in combination with the volume down button until
the Startup menu is displayed, and then tap F9 to enter the Boot Device Options menu.
2. Select a boot device, then press enter.
TPM BIOS settings (select products only)
IMPORTANT: Before enabling Trusted Platform Module (TPM) functionality on this system, you must ensure
that your intended use of TPM complies with relevant local laws, regulations and policies, and approvals or
licenses must be obtained if applicable. For any compliance issues arising from your operation/usage of TPM
which violates the above mentioned requirement, you shall bear all the liabilities wholly and solely. HP will
not be responsible for any related liabilities.
TPM provides additional security for your computer. You can modify the TPM settings in Computer Setup
(BIOS).
NOTE: If you change the TPM setting to Hidden, TPM is not visible in the operating system.
To access TPM settings in Computer Setup:
1. Start Computer Setup. See Starting Computer Setup on page 83.
2. Select Security, select TPM Embedded Security, and then follow the on-screen instructions.
86 Chapter 9 Computer Setup (BIOS), TPM, and HP Sure Start in Windows 10
Using HP Sure Start (select products only)
Select computer models are congured with HP Sure Start, a technology that continuously monitors the
computer's BIOS for attacks or corruption. If the BIOS becomes corrupted or is attacked, HP Sure Start
automatically restores the BIOS to its previously safe state, without user intervention.
HP Sure Start is congured and already enabled so that most users can use the HP Sure Start default
conguration. The default conguration can be customized by advanced users.
To access the latest documentation on HP Sure Start, go to http://www.hp.com/support, and select your
country. Select Drivers & Downloads, and then follow the on-screen instructions.
Using HP Sure Start (select products only) 87
10 HP PC Hardware Diagnostics (UEFI)
HP PC Hardware Diagnostics is a Unied Extensible Firmware Interface (UEFI) that allows you to run diagnostic
tests to determine whether the computer hardware is functioning properly. The tool runs outside the
operating system so that it can isolate hardware failures from issues that are caused by the operating system
or other software components.
NOTE: To start BIOS on a convertible computer, your computer must be in notebook mode and you must use
the keyboard attached to your tablet. The on-screen keyboard, which displays in tablet mode, cannot access
BIOS.
To start HP PC Hardware Diagnostics UEFI:
1. Start BIOS:
●Computers or tablets with keyboards:
▲Turn on or restart the computer, quickly press esc.
●Tablets without keyboards:
▲Turn on or restart the tablet, and then quickly hold down the volume down button.
- or -
Turn on or restart the tablet, and then quickly hold down the Windows button.
2. Press or tap f2.
The BIOS searches three places for the diagnostic tools, in the following order:
a. Connected USB drive
NOTE: To download the HP PC Hardware Diagnostics (UEFI) tool to a USB drive, see Downloading
HP PC Hardware Diagnostics (UEFI) to a USB device on page 88.
b. Hard drive
c. BIOS
3. When the diagnostic tool opens, select the type of diagnostic test you want to run, and then follow the
on-screen instructions. On a tablet, press the volume down button to stop a diagnostic test.
NOTE: If you need to stop a diagnostic test on computers or tablets with a keyboard, press esc.
Downloading HP PC Hardware Diagnostics (UEFI) to a USB device
There are two options to download HP PC Hardware Diagnostics to a USB device:
Download the latest UEFI version:
1. Go to http://www.hp.com/go/techcenter/pcdiags. The HP PC Diagnostics home page is displayed.
2. In the HP PC Hardware Diagnostics section, click the Download link, and then select Run.
88 Chapter 10 HP PC Hardware Diagnostics (UEFI)
Download any version of UEFI for a specic product:
1. Go to http://www.hp.com/support, and then select your country. The HP Support page is displayed.
2. Click Drivers & Downloads.
3. In the text box, enter the product name, and then click Go.
– or –
Click Find Now to let HP automatically detect your product.
4. Select your computer, and then select your operating system.
5. In the Diagnostic section, follow the on-screen instructions to select and download the UEFI version
you want.
Downloading HP PC Hardware Diagnostics (UEFI) to a USB device 89
11 Backup and recovery in Windows 7
Your computer includes HP and Windows tools to help you safeguard your information and retrieve it if you
ever need to. These tools along with an optional external hard drive, a network drive, or an optional external
optical drive will help you return your computer to a proper working state, all with simple steps. This section
provides information about the following processes:
●Creating recovery media and backups
●Restoring and recovering your system
Creating recovery media and backups
Recovery after a system failure is only as good as your most recent backup.
1. After you successfully set up the computer, create HP Recovery media. This step creates a Windows 7
operating system DVD and a Driver Recovery DVD. The Windows DVD can be used to reinstall the original
operating system in cases where the hard drive is corrupted or has been replaced. The Driver Recovery
DVD installs specic drivers and applications. See Creating recovery media with HP Recovery Disc
Creator on page 90.
2. Use Windows Backup and Recovery tools to perform the following:
●Back up individual les and folders
●Back up your entire hard drive (select models only)
●Create system repair discs (select models only) with an optional external optical drive
●Create system restore points
NOTE: This guide describes an overview of backing up, restoring, and recovering options. For more details
about the tools provided, see Help and Support. To access Help and Support, select Start > Help and Support.
NOTE: HP recommends that you print the recovery procedures and save them for later use, in case of
system instability.
In case of system failure, you can use the backup les to restore the contents of your computer. See Backing
up your information on page 91.
Guidelines
●When creating recovery media or backing up to discs, use any of the following types of discs (purchased
separately): DVD+R, DVD+R DL, DVD-R, DVD-R DL, or DVD±RW. The discs you use will depend on the type
of optical drive you are using.
●Be sure that the computer is connected to AC power before you start the recovery media creation
process or the backup process.
Creating recovery media with HP Recovery Disc Creator
HP Recovery Disc Creator is a software program that oers an alternative way to create recovery media. After
you successfully set up the computer, you can create recovery media using HP Recovery Disc Creator. This
recovery media allows you to reinstall your original operating system as well as select drivers and
90 Chapter 11 Backup and recovery in Windows 7
applications if the hard drive becomes corrupted. HP Recovery Disc Creator can create two kinds of recovery
DVDs:
●Windows 7 operating system DVD—Installs the operating system without additional drivers or
applications.
●Driver Recovery DVD—Installs specic drivers and applications only, in the same way that the HP
Software Setup utility installs drivers and applications.
Creating recovery media
NOTE: The Windows 7 operating system DVD can be created only once. Thereafter, the option to create that
media will not be available after you create a Windows DVD.
To create the Windows DVD:
1. Select Start > All Programs > Productivity and Tools > HP Recovery Disc Creator.
2. Select Windows disk.
3. From the drop-down menu, select the drive for burning the recovery media.
4. Click the Create button to start the burning process.
After the Windows 7 operating system DVD has been created, create the Driver Recovery DVD:
1. Select Start > All Programs > Productivity and Tools > HP Recovery Disc Creator.
2. Select Driver disk.
3. From the drop-down menu, select the drive for burning the recovery media.
4. Click the Create button to start the burning process.
Backing up your information
You should create system repair media and your initial backup immediately after initial system setup. As you
add new software and data les, you should continue to back up your system on a regular basis to maintain a
reasonably current backup. You should also create Windows system repair media (select models only) which
can be used to start up (boot) the computer and repair the operating system in case of system instability or
failure. Your initial and subsequent backups allow you to restore your data and settings if a failure occurs.
You can back up your information to an optional external hard drive, a network drive, or optional external
optical discs.
Note the following when backing up:
●Store personal les in the Documents library, and back it up regularly.
●Back up templates that are stored in their associated directories.
●Save customized settings that appear in a window, toolbar, or menu bar by taking a screen shot of your
settings. The screen shot can be a time-saver if you have to reset your preferences.
●When backing up to discs, number each disc after removing it from the drive.
NOTE: For detailed instructions on various backup and restore options, perform a search for these topics in
Help and Support. To access Help and Support, select Start > Help and Support.
NOTE: Windows includes the User Account Control feature to improve the security of your computer. You
may be prompted for your permission or password for tasks such as installing software, running utilities, or
changing Windows settings. Refer to Help and Support. To access Help and Support, select Start > Help and
Support.
Creating recovery media and backups 91
To create a backup using Windows Backup and Restore:
NOTE: The backup process may take over an hour, depending on le size and the speed of the computer.
1. Select Start > All Programs > Maintenance > Backup and Restore.
2. Follow the on-screen instructions to set up your backup, create a system image (select models only), or
create system repair media (select models only).
Performing a system recovery
In case of system failure or instability, the computer provides the following tools to recover your les:
●Windows recovery tools: You can use Windows Backup and Restore to recover information you have
previously backed up. You can also use Windows Startup Repair to x problems that might prevent
Windows from starting correctly.
●f11 recovery tools (select models only): You can use the f11 recovery tools to recover your original hard
drive image. The image includes the Windows operating system and software programs installed at the
factory.
NOTE: If you are unable to boot (start up) your computer and you cannot use the system repair media you
previously created (select models only), you must purchase Windows 7 operating system media to reboot the
computer and repair the operating system. For additional information, see Using Windows 7 operating system
media on page 93.
Using the Windows recovery tools
Using the Windows recovery tools, you can:
●Recover individual les
●Restore the computer to a previous system restore point
●Recover information using recovery tools
NOTE: For detailed instructions on various recovery and restore options, perform a search for these topics
in Help and Support. To access Help and Support, select Start > Help and Support.
NOTE: Windows includes the User Account Control feature to improve the security of your computer. You
may be prompted for your permission or password for tasks such as installing software, running utilities, or
changing Windows settings. Refer to Help and Support. To access Help and Support, select Start > Help and
Support.
To recover information you previously backed up:
1. Select Start > All Programs > Maintenance > Backup and Restore.
2. Follow the on-screen instructions to recover your system settings, your computer (select models only),
or your les.
To recover your information using Startup Repair, follow these steps:
CAUTION: Some Startup Repair options will completely erase and reformat the hard drive. All les you have
created and any software installed on the computer are permanently removed. When reformatting is
complete, the recovery process restores the operating system, as well as the drivers, software, and utilities
from the backup used for recovery.
92 Chapter 11 Backup and recovery in Windows 7
1. If possible, back up all personal les.
2. If possible, check for the presence of the Windows partition.
To check for the Windows partition, select Start > Computer.
NOTE: If the Windows partition is not listed, you must recover your operating system and programs
using the Windows 7 operating system DVD and the Driver Recovery media. For additional information,
see Using Windows 7 operating system media on page 93.
3. If the Windows partition is listed, restart the computer, and then press f8 before the Windows operating
system loads.
4. Select Startup Repair.
5. Follow the on-screen instructions.
NOTE: For additional information on recovering information using the Windows tools, select Start > Help
and Support.
Using f11 recovery tools (select models only)
CAUTION: Using f11 completely erases hard drive contents and reformats the hard drive. All les that you
have created and any software that you have installed on the computer are permanently removed. The f11
recovery tool reinstalls the operating system and HP programs and drivers that were installed at the factory.
Software not installed at the factory must be reinstalled.
To recover the original hard drive image using f11:
1. If possible, back up all personal les.
2. If possible, check for the presence of the HP Recovery partition: click Start, right-click Computer, click
Manage, and then click Disk Management.
NOTE: If the HP Recovery partition is not listed, you must recover your operating system and programs
using the Windows 7 operating system media and the Driver Recovery media. For additional information,
see Using Windows 7 operating system media on page 93.
3. If the HP Recovery partition is listed, restart the computer, and then press esc while the “Press the ESC
key for Startup Menu” message is displayed at the bottom of the screen.
4. Press f11 while the “Press <F11> for recovery” message is displayed on the screen.
5. Follow the on-screen instructions.
Using Windows 7 operating system media
If you cannot use the recovery media you previously created using the HP Recovery Disc Creator (select
models only), you must purchase a Windows 7 operating system DVD to reboot the computer and repair the
operating system.
To order a Windows 7 operating system DVD, go to the HP website. For U.S. support, go to
http://www.hp.com/support. For worldwide support, go to http://welcome.hp.com/country/us/en/
wwcontact_us.html. You can also order the DVD by calling support. For contact information, see the
Worldwide Telephone Numbers booklet included with the computer.
CAUTION: Using a Windows 7 operating system DVD completely erases hard drive contents and reformats
the hard drive. All les that you have created and any software that you have installed on the computer are
permanently removed. When reformatting is complete, the recovery process helps you restore the operating
system, as well as drivers, software, and utilities.
Performing a system recovery 93
To initiate recovery using a Windows 7 operating system DVD:
NOTE: This process takes several minutes.
1. If possible, back up all personal les.
2. Restart the computer, and then insert the Windows 7 operating system DVD into the optical drive before
the Windows operating system loads.
3. When prompted, press any keyboard key.
4. Follow the on-screen instructions.
5. Click Next.
6. Select Repair your computer.
7. Follow the on-screen instructions.
After the repair is completed:
1. Eject the Windows 7 operating system DVD and then insert the Driver Recovery DVD.
2. Install the Hardware Enabling Drivers rst, and then install Recommended Applications.
94 Chapter 11 Backup and recovery in Windows 7
12 Backup and recovery in Windows 8
To protect your information, use Windows backup and restore utilities to back up individual les and folders,
back up your entire hard drive, create system repair media (select models only) by using an optional external
optical drive, or create system restore points. In case of system failure, you can use the backup les to restore
the contents of your computer.
From the Start screen, type restore, click Settings, and then select from the list of displayed options.
NOTE: For detailed instructions on various backup and restore options, perform a search for these topics in
Windows Help and Support.
In case of system instability, HP recommends that you print the recovery procedures and save them for later
use.
NOTE: Windows includes the User Account Control feature to improve the security of your computer. You
may be prompted for your permission or password for tasks such as installing software, running utilities, or
changing Windows settings. For more information, see Windows Help and Support.
Backing up your information
Recovery after a system failure is as good as your most recent backup. You should create system repair media
and your initial backup immediately after initial system setup. As you add new software and data les, you
should continue to back up your system on a regular basis to maintain a reasonably current backup.
For more information on the Windows backup features, see Windows Help and Support.
Performing a system recovery
In case of system failure or instability, the computer provides the following tools to recover your les:
●Windows recovery tools: You can use Windows Backup and Restore to recover information you have
previously backed up. You can also use Windows Automatic Repair to x problems that might prevent
Windows from starting correctly.
●f11 recovery tools: You can use the f11 recovery tools to recover your original hard drive image. The
image includes the Windows operating system and software programs installed at the factory.
NOTE: If you are unable to boot (start up) your computer and you cannot use the system repair media you
previously created (select models only), you must purchase Windows operating system media to reboot the
computer and repair the operating system. For additional information, see Using Windows operating system
media (purchased separately) on page 97.
Using the Windows recovery tools
To recover information you previously backed up, see Windows Help and Support for steps on restoring les
and folders.
To recover your information using Automatic Repair, follow these steps:
Backing up your information 95
CAUTION: Some Startup Repair options will completely erase and reformat the hard drive. All les you have
created and any software installed on the computer are permanently removed. When reformatting is
complete, the recovery process restores the operating system, as well as the drivers, software, and utilities
from the backup used for recovery.
1. If possible, back up all personal les.
2. If possible, check for the presence of the Recovery Image partition and the Windows partition.
From the Start screen, type file, and then click File Explorer.
– or –
From the Start screen, type pc, and then select This PC.
NOTE: If the Windows partition and the Recovery Image partition are not listed, you must recover your
operating system and programs using the Windows operating system DVD and the Driver Recovery
media (both purchased separately). For additional information, see Using Windows operating system
media (purchased separately) on page 97.
3. If the Windows partition and the Recovery Image partition are listed, restart the computer by pressing
and holding the shift key while clicking Restart.
4. Select Troubleshoot, then select Advanced Options, and then select Startup Repair.
5. Follow the on-screen instructions.
NOTE: For additional information on recovering information using the Windows tools, perform a search for
these topics in Windows Help and Support.
Using f11 recovery tools
CAUTION: Using f11 completely erases hard drive contents and reformats the hard drive. All les that you
have created and any software that you have installed on the computer are permanently removed. The f11
recovery tool reinstalls the operating system and HP programs and drivers that were installed at the factory.
Software not installed at the factory must be reinstalled.
To recover the original hard drive image using f11:
1. If possible, back up all personal les.
2. If possible, check for the presence of the Recovery Image partition: From the Start screen, type pc, and
then select This PC.
NOTE: If the Recovery Image partition is not listed, you must recover your operating system and
programs using the Windows operating system media and the Driver Recovery media (both purchased
separately). For additional information, see Using Windows operating system media (purchased
separately) on page 97.
3. If the Recovery Image partition is listed, restart the computer, and then press esc while the “Press the
ESC key for Startup Menu” message is displayed at the bottom of the screen.
4. Press f11 while the “Press <F11> for recovery” message is displayed on the screen.
5. Follow the on-screen instructions.
96 Chapter 12 Backup and recovery in Windows 8
Using Windows operating system media (purchased separately)
To order a Windows operating system DVD, contact support. See the Worldwide Telephone Numbers booklet
included with the computer. You can also nd contact information from the HP website. Go to
http://www.hp.com/support, select your country or region, and follow the on-screen instructions.
CAUTION: Using a Windows operating system media completely erases hard drive contents and reformats
the hard drive. All les that you have created and any software that you have installed on the computer are
permanently removed. When reformatting is complete, the recovery process helps you restore the operating
system, as well as drivers, software, and utilities.
To initiate a full install of the operating system using a Windows operating system DVD:
NOTE: This process takes several minutes.
1. If possible, back up all personal les.
2. Insert the Windows operating system DVD into the optional external optical drive, and then restart the
computer.
3. When prompted, press any keyboard key.
4. Follow the on-screen instructions.
After the installation is completed:
1. Eject the Windows operating system media and then insert the Driver Recovery media.
2. Install the Hardware Enabling Drivers rst, and then install Recommended Applications.
Using Windows Refresh or Windows Reset
When your computer is not working properly and you need to regain system stability, the Windows Refresh
option allows you to start fresh and keep what is important to you.
The Windows Reset option allows you to perform detailed reformatting of your computer, or remove personal
information before you give away or recycle your computer. For more information on these features, see
Windows Help and Support.
Using HP Software Setup
HP Software Setup can be used to reinstall drivers or select software that has been corrupted or deleted from
the system.
1. From the Start screen, type HP Software Setup.
2. Open HP Software Setup.
3. Follow the on-screen directions to reinstall drivers or select software.
Performing a system recovery 97
13 Backup and recovery in Windows 10
This chapter provides information about the following processes. The information in the chapter is standard
procedure for most products.
●Creating recovery media and backups
●Restoring and recovering your system
For additional information, refer to the HP support assistant app.
▲Type support in the taskbar search box, and then select the HP Support Assistant app.
‒ or –
Click the question mark icon in the taskbar.
IMPORTANT: If you will be performing recovery procedures on a tablet, the tablet battery must be at least
70% charged before you start the recovery process.
IMPORTANT: For a tablet with a detachable keyboard, connect the keyboard to the keyboard dock before
beginning any recovery process.
Creating recovery media and backups
The following methods of creating recovery media and backups are available on select products only. Choose
the available method according to your computer model.
●Use HP Recovery Manager to create HP Recovery media after you successfully set up the computer. This
step creates a backup of the HP Recovery partition on the computer. The backup can be used to reinstall
the original operating system in cases where the hard drive is corrupted or has been replaced. For
information on creating recovery media, see Creating HP Recovery media (select products only)
on page 98. For information on the recovery options that are available using the recovery media, see
Using Windows tools on page 99.
●Use Windows tools to create system restore points and create backups of personal information.
For more information, see Recovering using HP Recovery Manager on page 100.
NOTE: If storage is 32 GB or less, Microsoft System Restore is disabled by default.
Creating HP Recovery media (select products only)
If possible, check for the presence of the Recovery partition and the Windows partition. From the Start menu,
select File Explorer, and then select This PC.
●If your computer does not list the Windows partition and the Recovery partition, you can obtain recovery
media for your system from support. See the Worldwide Telephone Numbers booklet included with the
computer. You can also nd contact information on the HP website. Go to http://www.hp.com/support,
select your country or region, and follow the on-screen instructions.
98 Chapter 13 Backup and recovery in Windows 10
You can use Windows tools to create system restore points and create backups of personal information,
see Using Windows tools on page 99.
●If your computer does list the Recovery partition and the Windows partition, you can use HP Recovery
Manager to create recovery media after you successfully set up the computer. HP Recovery media can be
used to perform system recovery if the hard drive becomes corrupted. System recovery reinstalls the
original operating system and software programs that were installed at the factory and then congures
the settings for the programs. HP Recovery media can also be used to customize the system or restore
the factory image if you replace the hard drive.
◦Only one set of recovery media can be created. Handle these recovery tools carefully, and keep
them in a safe place.
◦HP Recovery Manager examines the computer and determines the required storage capacity for
the media that will be required.
◦To create recovery discs, your computer must have an optical drive with DVD writer capability, and
you must use only high-quality blank DVD-R, DVD+R, DVD-R DL, or DVD+R DL discs. Do not use
rewritable discs such as CD±RW, DVD±RW, double-layer DVD±RW, or BD-RE (rewritable Blu-ray)
discs; they are not compatible with HP Recovery Manager software. Or, instead, you can use a high-
quality blank USB ash drive.
◦If your computer does not include an integrated optical drive with DVD writer capability, but you
would like to create DVD recovery media, you can use an external optical drive (purchased
separately) to create recovery discs. If you use an external optical drive, it must be connected
directly to a USB port on the computer; the drive cannot be connected to a USB port on an external
device, such as a USB hub. If you cannot create DVD media yourself, you can obtain recovery discs
for your computer from HP. See the Worldwide Telephone Numbers booklet included with the
computer. You can also nd contact information on the HP website. Go to http://www.hp.com/
support, select your country or region, and follow the on-screen instructions.
◦Be sure that the computer is connected to AC power before you begin creating the recovery media.
◦The creation process can take an hour or more. Do not interrupt the creation process.
◦If necessary, you can exit the program before you have nished creating all of the recovery DVDs.
HP Recovery Manager will nish burning the current DVD. The next time you start HP Recovery
Manager, you will be prompted to continue.
To create HP Recovery media:
IMPORTANT: For a tablet with a detachable keyboard, connect the keyboard to the keyboard dock before
beginning these steps.
1. Type recovery in the taskbar search box, and then select HP Recovery Manager.
2. Select Create recovery media, and then follow the on-screen instructions.
If you ever need to recover the system, see Recovering using HP Recovery Manager on page 100.
Using Windows tools
You can create recovery media, system restore points, and backups of personal information using Windows
tools.
NOTE: If storage is 32 GB or less, Microsoft System Restore is disabled by default.
For more information and steps, see the Get started app.
▲Select the Start button, and then select the Get started app.
Using Windows tools 99
Restore and recovery
There are several options for recovering your system. Choose the method that best matches your situation
and level of expertise:
IMPORTANT: Not all methods are available on all products.
●Windows oers several options for restoring from backup, refreshing the computer, and resetting the
computer to its original state. For more information see the Get started app.
▲Select the Start button, and then select the Get started app.
●If you need to correct a problem with a preinstalled application or driver, use the Reinstall drivers and/or
applications option (select products only) of HP Recovery Manager to reinstall the individual application
or driver.
▲Type recovery in the taskbar search box, select HP Recovery Manager, select Reinstall drivers
and/or applications, and then follow the on-screen instructions.
●If you want to recover the Windows partition to original factory content, you can choose the System
Recovery option from the HP Recovery partition (select products only) or use the HP Recovery media.
For more information, see Recovering using HP Recovery Manager on page 100. If you have not already
created recovery media, see Creating HP Recovery media (select products only) on page 98.
●On select products, if you want to recover the computer's original factory partition and content, or if you
have replaced the hard drive, you can use the Factory Reset option of HP Recovery media. For more
information, see Recovering using HP Recovery Manager on page 100.
●On select products, if you want to remove the recovery partition to reclaim hard drive space, HP
Recovery Manager oers the Remove Recovery Partition option.
For more information, see Removing the HP Recovery partition (select products only) on page 103.
Recovering using HP Recovery Manager
HP Recovery Manager software allows you to recover the computer to its original factory state by using the
HP Recovery media that you either created or that you obtained from HP, or by using the HP Recovery
partition (select products only). If you have not already created recovery media, see Creating HP Recovery
media (select products only) on page 98.
What you need to know before you get started
●HP Recovery Manager recovers only software that was installed at the factory. For software not provided
with this computer, you must either download the software from the manufacturer's website or reinstall
the software from the media provided by the manufacturer.
IMPORTANT: Recovery through HP Recovery Manager should be used as a nal attempt to correct
computer issues.
●HP Recovery media must be used if the computer hard drive fails. If you have not already created
recovery media, see Creating HP Recovery media (select products only) on page 98.
●To use the Factory Reset option (select products only), you must use HP Recovery media. If you have not
already created recovery media, see Creating HP Recovery media (select products only) on page 98.
●If your computer does not allow the creation of HP Recovery media or if the HP Recovery media does not
work, you can obtain recovery media for your system from support. See the Worldwide Telephone
Numbers booklet included with the computer. You can also nd contact information from the HP
100 Chapter 13 Backup and recovery in Windows 10
website. Go to http://www.hp.com/support, select your country or region, and follow the on-screen
instructions.
IMPORTANT: HP Recovery Manager does not automatically provide backups of your personal data. Before
beginning recovery, back up any personal data you want to retain.
Using HP Recovery media, you can choose from one of the following recovery options:
NOTE: Only the options available for your computer display when you start the recovery process.
●System Recovery—Reinstalls the original operating system, and then congures the settings for the
programs that were installed at the factory.
●Factory Reset—Restores the computer to its original factory state by deleting all information from the
hard drive and re-creating the partitions. Then it reinstalls the operating system and the software that
was installed at the factory.
The HP Recovery partition (select products only) allows System Recovery only.
Using the HP Recovery partition (select products only)
The HP Recovery partition allows you to perform a system recovery without the need for recovery discs or a
recovery USB ash drive. This type of recovery can be used only if the hard drive is still working.
To start HP Recovery Manager from the HP Recovery partition:
IMPORTANT: For a tablet with a detachable keyboard, connect the keyboard to the keyboard dock before
beginning these steps (select products only).
1. Type recovery in the taskbar search box, select Recovery Manager, and then select HP Recovery
Environment.
- or-
For computers or tablets with keyboards attached, press f11 while the computer boots, or press and
hold f11 as you press the power button.
For tablets without keyboards:
Turn on or restart the tablet, and then quickly hold down the volume down button; then select f11.
- or -
Turn on or restart the tablet, and then quickly hold down the Windows button; then select f11.
2. Select Troubleshoot from the boot options menu.
3. Select Recovery Manager, and then follow the on-screen instructions.
Using HP Recovery media to recover
You can use HP Recovery media to recover the original system. This method can be used if your system does
not have an HP Recovery partition or if the hard drive is not working properly.
1. If possible, back up all personal les.
2. Insert the HP Recovery media, and then restart the computer.
NOTE: If the computer does not automatically restart in HP Recovery Manager, change the computer
boot order. See Changing the computer boot order on page 102.
3. Follow the on-screen instructions.
Restore and recovery 101
Changing the computer boot order
If your computer does not restart in HP Recovery Manager, you can change the computer boot order, which is
the order of devices listed in BIOS where the computer looks for startup information. You can change the
selection to an optical drive or a USB ash drive.
To change the boot order:
IMPORTANT: For a tablet with a detachable keyboard, connect the keyboard to the keyboard dock before
beginning these steps.
1. Insert the HP Recovery media.
2. Access BIOS:
For computers or tablets with keyboards attached:
▲Turn on or restart the computer or tablet, quickly press esc, and then press f9 for boot options.
For tablets without keyboards:
▲Turn on or restart the tablet, and then quickly hold down the volume down button; then select f9.
- or -
Turn on or restart the tablet, and then quickly hold down the Windows button; then select f9.
3. Select the optical drive or USB ash drive from which you want to boot.
4. Follow the on-screen instructions.
102 Chapter 13 Backup and recovery in Windows 10
Removing the HP Recovery partition (select products only)
HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space.
IMPORTANT: After you remove the HP Recovery partition, you will not be able to perform System Recovery
or create HP recovery media from the HP Recovery partition. So before you remove the Recovery partition,
create HP Recovery media; see Creating HP Recovery media (select products only) on page 98.
NOTE: The Remove Recovery Partition option is only available on products that support this function.
Follow these steps to remove the HP Recovery partition:
1. Type recovery in the taskbar search box, and then select HP Recovery Manager.
2. Select Remove Recovery Partition, and then follow the on-screen instructions.
Restore and recovery 103
14 Specications
Computer specications
Metric U.S.
Dimensions
Width 33.80 cm 13.3 in
Depth 23.13 cm 9.09 in
Height (front to back) 1.95 cm 0.77 in
Weight
Equipped with one memory module, WLAN module, and
mSATA drive
1.63 kg 3.6 lbs
Input power
Operating voltage and current 18.5 V dc @ 3.5 A - 65 W
– or –
19.0 V dc @ 4.74 A - 90 W
Temperature
Operating 5°C to 35°C 41°F to 95°F
Nonoperating ‑20°C to 60°C ‑4°F to 140°F
Relative humidity (noncondensing)
Operating 10% to 90%
Nonoperating 5% to 95%
Maximum altitude (unpressurized)
Operating ‑15 m to 3,048 m ‑50 ft to 10,000 ft
Nonoperating ‑15 m to 12,192 m ‑50 ft to 40,000 ft
NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The device operates well within this range of
temperatures.
104 Chapter 14 Specications
35.6-cm (14.0-in) display specications
Metric U.S.
Dimensions
Height 17.6 cm 6.93 in
Width 31.2 cm 12.28 in
Diagonal 35.7 cm 14.06 in
Number of colors up to 16.8 million
Contrast ratio 200:1 (typical)
Brightness 200 nits (typical)
Pixel resolution
Pitch 0.197 × 0.197 mm
Format HD, SVA (1366 x 768)
Conguration RGB vertical stripe
Backlight LED
Character display 80 × 25
Total power consumption 3.46 W
Viewing angle ±65° horizontal, ±50° vertical (typical)
35.6-cm (14.0-in) display specications 105
Hard drive specications
500-GB* 320-GB*
Dimensions
Height 7 mm 7 mm
Length 100.4 mm 100.4 mm
Width 69.9 mm 69.9 mm
Weight 110 g 110 g
Interface type SATA SATA
Transfer rate
Synchronous (maximum) 1.1 GB/sec 1.1 GB/sec
Security ATA security or SED ATA security
Seek times (typical read, including setting)
Single track 1.5 ms 1.5 ms
Average (read/write) 11/13 ms 11/13 ms
Maximum 22 ms 22 ms
Logical blocks 976,773,168 628,142,448
Disk rotational speed 7200 rpm 7200 rpm
Operating temperature
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less.
NOTE: Certain restrictions and exclusions apply. Contact technical support for details.
106 Chapter 14 Specications
Solid-state drive specications
180-GB* 256-GB*
Dimensions
Height 7 mm 7 mm
Length 100.5 mm 100.5 mm
Width 69.9 mm 69.9 mm
Weight 78 g 78 g
Interface type ATA-7 ATA-7
Transfer rate
Sequential Read
Random Read
Up to 550 MB/s
Up to 50K IOPS
Up to 460 MB/s
Up to 46K IOPS
Sequential Write
Random Write
Up to 520 MB/s
Up to 80K IOPS
Up to 260 MB/s
Up to 56K IOPS
Ready time, Maximum (to not busy) 2.0 s 4.0 s
Access times
Logical 0.1 ms 0.1
Total logical sectors 351,651,888 500,118,192
Operating temperature
Operating
Non-operating
0° to 70°C (32°F to 158°F)
-55° to 95°C (-67°F to
203°F)
0° to 70°C (32°F to 158°F)
-40° to 80°C (-40°F to
176°F)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less.
NOTE: Certain restrictions and exclusions apply. Contact technical support for details.
Solid-state drive specications 107
mSATA drive specications
24-GB* 32-GB* 256-GB*
Dimensions
Height 1 mm 1 mm 1 mm
Length 50.8 mm 50.8 mm 50.8 mm
Width 28.9 mm 28.9 mm 28.9 mm
Weight < 10 g < 10 g < 10 g
Interface type ATA-7 ATA-7 ATA-7
Transfer rate
Sequential Read
Random Read
Up to 160 MB/s
Up to 128 MB/s
Up to 380 MB/s
Up to 180 MB/s
Up to 490 MB/s
Up to 480 MB/s
Sequential Write
Random Write
Up to 115 MB/s
Up to 16 MB/s
Up to 80 MB/s
Up to 40 MB/s
Up to 250 MB/s
Up to 100 MB/s
Ready time, Maximum (to not busy) 2.0 s 4.0 s 4.0 s
Access times
Logical 0.1 ms 0.1 ms 0.1
Total logical sectors 46,905,264 62,533,296 500,118,192
Operating temperature
Operating
Non-operating
0° to 70°C (32°F to
158°F)
-55° to 95°C (-67°F to
203°F)
0° to 70°C (32°F to
158°F)
-40° to 80°C (-40°F to
176°F)
0° to 70°C (32°F to
158°F)
-40° to 80°C (-40°F to
176°F)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less.
NOTE: Certain restrictions and exclusions apply. Contact technical support for details.
108 Chapter 14 Specications
15 Statement of Volatility
The purpose of this document is to provide general information regarding non-volatile memory in industry-
standards based HP Business Notebook PC systems and provide general instructions for restoring nonvolatile
memory that can contain personal data after the system has been powered o and the hard drive has been
removed.
HP Business Notebook PC products that use Intel®-based or AMD®-based system boards contain volatile DDR
memory. The amount of nonvolatile memory present in the system depends upon the system conguration.
Intel-based and AMD-based system boards contain nonvolatile memory subcomponents as originally shipped
from HP assuming that no subsequent modications have been made to the system and assuming that no
applications, features, or functionality have been added to or installed on the system.
Following system shutdown and removal of all power sources from an HP Business Notebook PC system,
personal data can remain on volatile system memory (DIMMs) for a nite period of time and will also remain
in nonvolatile memory. The steps below will remove personal data from the notebook PC, including the
nonvolatile memory found in Intel-based and AMD-based system boards. Some of these steps are disclosed
in the Maintenance & Service Guides available for HP PC products available on the product support pages at
www.hp.com.
1. Follow steps (a) through (I) below to restore the nonvolatile memory that can contain personal data.
Restoring or re-programming nonvolatile memory that does not store personal data is neither
necessary nor recommended.
a. Enter BIOS (F10) Setup by powering on the system and pressing F10 when prompted near the
bottom of the display, or press the ESC key to display the start up menu, then press F10 . If the
system has a BIOS administrator password, enter the password at the prompt.
b. Select the File menu, then Restore Defaults.
c. Select the System Conguration menu, then Restore Security Defaults.
d. If an asset or ownership tag is set, select the Security menu and scroll down to the Utilities menu.
Select System IDs, and then select the tag that has been set. Press the spacebar once to clear the
tag, then press Enter to return to the prior menu.
e. If a DriveLock password is set, select the Security menu, scroll down to DriveLock, then select
DriveLock password. Select the desired hard drive. Click Disable protection, enter the existing
master DriveLock password, then press Enter to conrm and return to the prior menu. Repeat this
procedure if more than one hard drive has a DriveLock password.
f. If an Automatic DriveLock password is set, select the Security menu, scroll down to Automatic
DriveLock, then select the desired hard drive and disable protection. Repeat this procedure if more
than one hard drive has an Automatic DriveLock password.
g. Select the File menu, then Reset BIOS Security to factory default. Click yes at the warning
message.
h. Select the File menu, then Save Changes and Exit.
i. Reboot the system. If the system has a Trusted Platform Module (TPM) and/or ngerprint sensor,
one or two prompts will appear. One to clear the TPM and the other to Reset Fingerprint Sensor;
press F1 to accept or F2 to reject.
If the HP notebook model number ends in a ‘p’ or ‘w’ and includes Intel® Centrino with VProTM,
reboot the PC and enter BIOS Setup by pressing F10 when prompted. Select System Conguration,
109
then AMT Options. Then select Un-congure AMT on next boot. Select Save then Yes. Select the
File menu, and then select Save Changes and Exit. Reboot the system and conrm that you want
to un-congure AMT.
j. If the optional Intel® Anti-Theft Technology (AT) was activated, contact the provider to de-activate
it.
k. If the optional Absolute® Software Computrace® management and tracking service was activated
on the notebook PC, contact the provider to deactivate it.
l. Remove all power and system batteries for at least 24 hours.
2. Remove and retain the storage drive or clear the contents of the drive.
a. Hard Disk Drive (HDD)
Clear the HDD contents by using the HP Disk Sanitizer® utility or a third party application that,
ideally, is U.S. Department of Defense (DOD) 5220.22-M approved.
To run HP Disk Sanitizer, enter BIOS Setup by powering on the system and pressing F10 when
prompted near the bottom of the display, or press ESC to display the start up menu, then press
F10. Select the Security menu and scroll down to the Utilities menu. Select Disk Sanitizer and
select the desired drive. For a higher level of protection, select Optimum.
NOTE: This process will take a long time, and the amount of time varies based on the hard drive
capacity.
b. Solid State Drive (SSD)
Clear the SSD contents by using the BIOS Setup Secure Erase command option, or by using a third
party utility designed to erase data from an SSD. To run Secure Erase, enter BIOS Setup by
powering on the system and pressing F10 when prompted near the bottom of the display. Select
the Security menu and scroll down to the Utilities menu. Select Secure Erase and select the
desired hard drive.
Non-volatile memory usage
Non Volatile
Memory Type
Amount
(Size)
Does this
memory
store
customer
data?
Does this
memory
retain data
when power
is removed?
What is the
purpose of this
memory?
How is data input into this
memory?
How is this memory write
protected?
Real Time Clock
(RTC) battery
backed-up CMOS
conguration
memory (CMOS)
256 Bytes No Yes Stores system
date and time
and limited
keyboard
controller data.
Using the F10 Setup utility or
changing the Microsoft®
Windows® date & time.
This memory is not write-
protected. HP
recommends password
protecting the F10 Setup
utility.
Controller (NIC)
EEPROM
64 Kbytes
(not customer
accessible)
No Yes Store NIC
conguration
and NIC
rmware.
Using a utility from the NIC
vendor that can be run from
DOS.
A utility is required to
write data to this memory
and is available from NIC
vendor. Writing data to
this ROM in an
inappropriate manner will
render the NIC non-
functional.
Keyboard ROM 64 Kbytes
(not customer
accessible)
No Yes Stores rmware
code (keyboard,
mouse, &
Programmed at the factory.
Code is updated when the
system BIOS is updated.
A utility is required for
writing data to this
memory and is available
110 Chapter 15 Statement of Volatility
Non Volatile
Memory Type
Amount
(Size)
Does this
memory
store
customer
data?
Does this
memory
retain data
when power
is removed?
What is the
purpose of this
memory?
How is data input into this
memory?
How is this memory write
protected?
battery
management).
on the HP website. Writing
data to this ROM in an
inappropriate manner can
render the PC non-
functional.
DIMM Serial
Presence Detect
(SPD)
conguration data
256 Bytes per
memory
module, 128
Bytes
programmabl
e (not
customer
accessible)
No Yes Stores memory
module
information.
Programmed by the memory
vendor.
Data cannot be written to
this memory when the
module is installed in a
PC. The specic write
protection method varies
by memory vendor.
System BIOS 4 to 5 MBytes Yes Yes Store system
BIOS code and
PC
conguration
data.
System BIOS code is
programmed at the factory.
Code is updated when the
system BIOS is updated.
Conguration data and
settings are input using the
F10 setup utility or a custom
utility.
A utility is required for
writing data to this
memory and is available
on the HP website. Writing
data to this ROM in an
inappropriate manner can
render the PC non-
functional.
Intel Management
Engine Firmware
(present only in
models ending in a
‘p’,‘w’, or ‘m’ or
with Intel Centrino
Pro technology)
1.5 or 5MByte Yes Yes Stores
Management
Engine Code,
Settings,
Provisioning
Data and iAMT
third party data
store.
Management Engine Code is
programmed at the factory.
Code is updated via Intel
secure rmware update
utility. Unique Provisioning
Data can be entered at the
factory or by an administrator
using the Management Engine
(MEBx) setup utility. The third
party data store contents can
populated by a remote
management console or local
applications registered by an
administrator to have access
to the space.
The Intel chipset is
congured to enforce HW
protection to block all
direct read/write access to
this area. An Intel utility is
required for updating the
rmware. Only rmware
updates digitally signed
by Intel can be applied
using this utility.
Bluetooth ash 2Mbit No Yes Stores
Bluetooth
conguration
and rmware.
Programmed at the factory.
Tools for writing data to this
memory are not publicly
available but can be obtained
from the silicon vendor.
A utility is required for
writing data to this
memory and is made
available through newer
versions of the driver if
the ash requires an
upgrade.
802.11 WLAN
EEPROM
4kb to 8kb No Yes Stores
conguration
and calibration
data.
Programmed at the factory.
Tools for writing data to this
memory are not made public.
A utility is required for
writing data to this
memory and is typically
not made available to the
public unless a rmware
upgrade is necessary to
address a unique issue.
Web Camera 64K bit No Yes Store Web Cam
conguration
and rmware.
Using a utility from the device
manufacturer that can be run
from Windows.
A utility is required for
writing data to this
memory and is typically
not made available to the
Non-volatile memory usage 111
Non Volatile
Memory Type
Amount
(Size)
Does this
memory
store
customer
data?
Does this
memory
retain data
when power
is removed?
What is the
purpose of this
memory?
How is data input into this
memory?
How is this memory write
protected?
public unless a rmware
upgrade is necessary to
address a unique issue.
Fingerprint Reader 512kByte
Flash
Yes Yes Stores
ngerprint
templates.
By enrolling in HP
ProtectTools Security
Manager.
Only a digitally signed
application can make the
call to write to the ash.
Questions and answers
1. How can the BIOS settings be restored (returned to factory settings)?
a. Turn on or restart the computer and press F10 when prompted near the bottom of the display.
b. Select File, then select Restore defaults.
c. Follow the on-screen instructions.
d. Select File, save changes and exit, then press Enter.
2. What kind of conguration data is stored on the DIMM Serial Presence Detect (SPD) memory
module? How would this data be written?
The DIMM SPD memory contains information about the memory module such as size, serial number,
data width, speed/timing, voltage and thermal information. This information is written by the module
manufacturer and stored on an EEPROM. This EEPROM cannot be written to when the memory module is
installed in a PC. Third party tools do exist that can write to the EEPROM when the memory module is
not installed in a PC. There are various third party tools available to read SPD memory.
3. Does the “Firmware Hub for System BIOS” contain the BIOS program? Is this chip writable, and if so
how?
The Firmware Hub does contain the BIOS program and is writable. A utility is required to perform the
write function.
4. In some PC systems, the Firmware Hub for System BIOS is a ash memory chip so that updates can
be written by the customer. Is this true for these BIOS chips?
Yes, they are ash memory chips.
5. What is meant by “Restore the nonvolatile memory found in Intel-based system boards”?
This relates to clearing the Real Time Clock (RTC) CMOS memory that contains PC conguration data.
6. Does resetting the CMOS conguration memory return the PC back to factory defaults?
The process of resetting the CMOS will return certain system settings to factory default but will not reset
many of the system data and conguration defaults to their factory settings. To return these system
data and conguration defaults to factory settings, refer to question and answer 1 and follow the
instructions for returning the BIOS settings to factory defaults.
112 Chapter 15 Statement of Volatility
16 Power cord set requirements
The wide-range input feature of the computer permits it to operate from any line voltage from 100 to 120
volts AC, or from 220 to 240 volts AC.
The 3-conductor power cord set included with the computer meets the requirements for use in the country or
region where the equipment is purchased.
Power cord sets for use in other countries and regions must meet the requirements of the country or region
where the computer is used.
Requirements for all countries
The following requirements are applicable to all countries and regions:
●The length of the power cord set must be at least 1.5 m (5.0 ft) and no more than 2.0 m (6.5 ft).
●All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in
the country or region where the power cord set will be used.
●The power cord sets must have a minimum current capacity of 10 amps and a nominal voltage rating of
125 or 250 V AC, as required by the power system of each country or region.
●The appliance coupler must meet the mechanical conguration of an EN 60 320/IEC 320 Standard Sheet
C13 connector for mating with the appliance inlet on the back of the computer.
Requirements for specic countries and regions
Country/region Accredited agency Applicable note number
Australia EANSW 1
Austria OVE 1
Belgium CEBC 1
Canada CSA 2
Denmark DEMKO 1
Finland FIMKO 1
France UTE 1
Germany VDE 1
Italy IMQ 1
Japan METI 3
The Netherlands KEMA 1
Norway NEMKO 1
The People's Republic of China COC 5
South Korea EK 4
Requirements for all countries 113
Country/region Accredited agency Applicable note number
Sweden SEMKO 1
Switzerland SEV 1
Taiwan BSMI 4
The United Kingdom BSI 1
The United States UL 2
1. The exible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set ttings (appliance coupler and
wall plug) must bear the certication mark of the agency responsible for evaluation in the country or region where it will be used.
2. The exible cord must be Type SPT-3 or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole grounding type
with a NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) conguration.
3. The appliance coupler, exible cord, and wall plug must bear a “T” mark and registration number in accordance with the Japanese
Dentori Law. The exible cord must be Type VCT or VCTF, 3-conductor, 1.00-mm² conductor size. The wall plug must be a two-
pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V) conguration.
4. The exible cord must be Type RVV, 3-conductor, 0.75-mm² conductor size. Power cord set ttings (appliance coupler and wall
plug) must bear the certication mark of the agency responsible for evaluation in the country or region where it will be used.
5. The exible cord must be Type VCTF, 3-conductor, 0.75-mm² conductor size. Power cord set ttings (appliance coupler and wall
plug) must bear the certication mark of the agency responsible for evaluation in the country or region where it will be used.
114 Chapter 16 Power cord set requirements
17 Recycling
Battery
When a non-rechargeable or rechargeable battery has reached the end of its useful life, do not dispose of the
battery in general household waste. Follow the local laws and regulations in your area for battery disposal.
HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable
batteries. For more information about recycling programs, see the HP Web site at http://www.hp.com/recycle.
Display
WARNING! The backlight contains mercury. Exercise caution when removing and handling the backlight to
avoid damaging this component and causing exposure to the mercury.
CAUTION: The procedures in this chapter can result in damage to display components. The only components
intended for recycling purposes are the LCD panel and the backlight. When you remove these components,
handle them carefully.
NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display assembly that
might require special handling at end-of-life. Disposal of mercury may be regulated because of
environmental considerations. For disposal or recycling information, contact your local authorities, or see the
Electronic Industries Alliance (EIA) Web site at http://www.eiae.org.
This section provides disassembly instructions for the display assembly. The display assembly must be
disassembled to gain access to the backlight (1) and the liquid crystal display (LCD) panel (2).
NOTE: The procedures provided in this chapter are general disassembly instructions. Specic details, such
as screw sizes, quantities, and locations, and component shapes and sizes, can vary from one computer
model to another.
Perform the following steps to disassemble the display assembly:
1. Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly.
Battery 115
2. Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the
display bezel until the bezel disengages from the display assembly.
3. Remove the display bezel (3).
4. Disconnect all display panel cables (1) from the display inverter and remove the inverter (2).
5. Remove all screws (1) that secure the display panel assembly to the display enclosure.
116 Chapter 17 Recycling
6. Remove the display panel assembly (2) from the display enclosure.
7. Position the display panel assembly upside-down.
8. Remove all screws that secure the display panel frame to the display panel.
9. Use a sharp-edged tool to cut the tape (1) that secures the sides of the display panel to the display
panel frame.
10. Remove the display panel frame (2) from the display panel.
11. Remove the screws (1) that secure the backlight cover to the display panel.
Display 117
12. Lift the top edge of the backlight cover (2) and swing it outward.
13. Remove the backlight cover.
14. Position the display panel right-side up.
15. Remove the backlight cables (1) from the clip (2) in the display panel.
16. Position the display panel upside-down.
WARNING! The backlight contains mercury. Exercise caution when removing and handling the
backlight to avoid damaging this component and causing exposure to the mercury.
118 Chapter 17 Recycling
17. Remove the backlight frame from the display panel.
18. Remove the backlight from the backlight frame.
19. Disconnect the display panel cable (1) from the LCD panel.
20. Remove the screws (2) that secure the LCD panel to the display rear panel.
21. Release the LCD panel (3) from the display rear panel.
22. Release the tape (4) that secures the LCD panel to the display rear panel.
Display 119
23. Remove the LCD panel.
24. Recycle the LCD panel and backlight.
120 Chapter 17 Recycling
Index
A
AC adapter, spare part numbers 22
AC adapter/battery light 10
antenna
removal 71, 72
spare part number 20, 71, 72
Antenna Kit, spare part number 20
audio, product description 2
audio-in (microphone) jack,
identifying 11
audio-out (headphone) jack,
identifying 11
B
Backup and Restore 92
backup tools 90
backups 98
creating 91
recovering 92
base enclosure
removal 53
spare part number 18, 53
battery
removal 29
spare part numbers 19, 29
battery bay, identifying 14
battery release latch 14
BIOS
determining version 74, 79, 85
downloading an update 75, 80,
85
updating 74, 79, 85
Blu-ray R/RE DVD±RW SuperMulti DL
Drive
precautions 25
Blu-ray ROM DVD±RW SuperMulti DL
Drive
precautions 25
Bluetooth label 15
boot order
changing 102
bottom 15
buttons
left pointing stick 6
left TouchPad 6
power 8
right pointing stick 6
right TouchPad 6
C
cables, service considerations 24
caps lock light, identifying 7
chipset, product description 1
components
bottom 13
display 5
front 10
left side 11
right side 12
top 6
computer major components 17
Computer Setup
navigating and selecting 73, 78,
83
restoring factory settings 74,
79, 84
computer specications 104
connector, power 11
connectors, service considerations
24
D
display
specications 105
display assembly
removal 67
subcomponents 20
display assembly components
removal 50
spare part numbers 50
display bezel
removal 50, 68
spare part numbers 20, 50, 51,
68
display component recycling 115
display enclosure, spare part
numbers 21
display hinge
removal 70
spare part number 20
display hinge cover
removal 70
Display Hinge Kit, spare part
number 20
display panel
product description 1
removal 51, 69
spare part number 50
spare part numbers 20, 51, 69
Display Panel Support Kit, spare part
numbers 21
DisplayPort
identifying 12
docking connector
identifying 12
Driver Recovery DVD,
creating 90
using for restore 93
drives, preventing damage 25
DVD-ROM Drive
precautions 25
DVD±RW Double-Layer with
SuperMulti Drive
precautions 25
E
electrostatic discharge 25
embedded numeric keypad,
identifying 10
equipment guidelines 28
esc key, identifying 9
Ethernet, product description 2
external monitor port 12
F
f11 recovery 93, 96
fan
removal 58
spare part number 18, 58
ngerprint reader board
removal 66
spare part number 18, 66
ngerprint reader, identifying 9
ash cache, product description 1
fn key, identifying 9
Index 121
function keys, identifying 9
G
graphics, product description 1
grounding guidelines 25
guidelines
equipment 28
grounding 25
packaging 27
transporting 27
workstation 27
H
Hard drive
spare part numbers 33
hard drive
precautions 25
product description 1
removal 33
spare part numbers 19, 21, 33
specications 106
hard drive bay, identifying 14
hard drive bracket
removal 34
hard drive cover
removal 32
spare part number 32
hard drive cover, illustrated 18
Hard Drive Hardware Kit
spare part number 19, 22, 33
hard drive light 11
hard drive recovery 93, 96
headphone (audio-out) jack 11
heat sink
removal 62
spare part numbers 18, 62
HP PC Hardware Diagnostics (UEFI)
using 88
HP Recovery Disc Creator, using 90
HP Recovery Manager
correcting boot problems 102
starting 101
HP Recovery media
creating 98
recovery 101
HP Recovery partition
checking for presence 93
recovery 101
removing 103
using for recovery 93
I
integrated webcam light,
identifying 5
internal display switch 5
internal microphones, identifying 5
J
jacks
audio-in (microphone) 11
audio-out (headphone) 11
network 12
RJ-45 (network) 12
K
keyboard
product description 3
remval 45
spare part numbers 18, 45
keypad
embedded numeric 10
keys
esc 9
fn 9
function 9
Windows applications 10
Windows key 9
L
labels
Bluetooth 15
regulatory 15
serial number 15
service 15
wireless certication 15
WLAN 15
latch, battery release 14
legacy support, USB 73, 78, 83
lights
AC adapter/battery 10
caps lock 7
hard drive 11
microphone mute 7
num lock 7
power 7, 10
RJ-45 (network) status 12
TouchPad 7
webcam 5
wireless 7, 10
M
mass storage device
illustrated 21
precautions 25
spare part numbers 21
memory card reader, identifying 12
memory module
product description 1
removal 39
spare part numbers 39
microphone
product description 2
microphone (audio-in) jack,
identifying 11
microphone module
removal 51
spare part number 20, 50, 51
microphone mute light, identifying
7
minimized image recovery 101
minimized image, creating 100
model name 1
mSATA drive
removal 35
spare part numbers 35
specications 108
mSATA module
product description 1
N
network jack, identifying 12
num lock light 7
O
operating system, product
description 3
optical drive
precautions 25
original system recovery 100
P
packaging guidelines 27
plastic parts, service
considerations 24
pointing device, product
description 3
pointing stick 6
ports
DisplayPort 12
external monitor 12
122 Index
product description 2
USB 3.0 charging (powered) 11
power button
identifying 8
power connector
removal 57
spare part number 57
power connector, identifying 11
power connector, spare part
number 57
power cord
set requirements 113
spare part numbers 22, 23
power lights 7, 10
power requirements, product
description 3
processor
product description 1
product description
audio 2
chipset 1
display panel 1
Ethernet 2
external media cards 2
ash cache 1
graphics 1
hard drive 1
keyboard 3
memory module 1
microphone 2
mSATA module 1
operating system 3
pointing device 3
ports 2
power requirements 3
processors 1
product name 1
security 3
serviceability 4
solid-state drive 1
video 2
wireless 2
product name 1
product name and number,
computer 15
R
recover
options 100
recovery 97
discs 99, 101
HP Recovery Manager 100
media 101
starting 101
supported discs 99
system 100
USB ash drive 101
using HP Recovery media 99
recovery media
creating 98
creating using HP Recovery
Manager 99
recovery media, creating 90
recovery media, using for restore
93
recovery partition 93, 96
removing 103
recovery tools 90
recovery tools, Windows 92
recovery, system 92
refresh 97
regulatory information
regulatory label 15
wireless certication labels 15
removal/replacement
procedures 29, 49
reset 97
restoring the hard drive 93, 96
RJ-45 (network) jack, identifying 12
RJ-45 (network) lights, identifying
12
RTC battery
removal 37
spare part number 18, 37
S
Screw Kit, spare part number 23
SD card insert, illustrated 18
security cable slot, identifying 11
security, product description 3
serial number 15
serial number, computer 15
service considerations
cables 24
connectors 24
plastic parts 24
service cover
removal 38
spare part number 18, 38
service labels, locating 15
serviceability, product description 4
setup utility
navigating and selecting 73, 78,
83
restoring factory settings 74,
79, 84
SIM slot, identifying 14
SIM, removal 30
slots
security cable 11
SIM 14
smart card 12
smart card board
removal 65
spare part number 65
Smart Card reader
spare part number 18
smart card slot, identifying 12
solid-state drive
precautions 25
product description 1
spare part numbers 19, 21, 33
specications 107
speaker assembly
removal 64
spare part number 18, 64
speakers, identifying 14
specications
computer 104
display 105
hard drive 106
mSATA drive 108
solid-state drive 107
Startup Repair, using 92
supported discs, recovery 99
Sure Start
using 87
system board
removal 59
spare part numbers 18, 59
system recovery 100
system restore point
creating 99
system restore point, creating 98
T
tools required 24
top cover, spare part numbers 18
Index 123
TouchPad
buttons 6
touchpad
removal 55
TouchPad light, identifying 7
TouchPad zone
identifying 6
TPM settings 86
transporting guidelines 27
travel battery connector,
identifying 13
traveling with the computer 15
U
USB 3.0 charging (powered) port,
identifying 11
USB 3.0 port 12
USB legacy support 73, 78, 83
USB ports, identifying 12
V
vents, identifying 11, 13
video, product description 2
W
webcam
identifying 5
spare part number 50
webcam light, identifying 5
webcam/microphone module
removal 51
spare part number 20
Windows
Refresh 97
Reset 97
system restore point 98, 99
Windows 7 operating system DVD
creating 90
using for restore 93
Windows 7 operating system media
creating 90
using for restore 93
Windows applications key,
identifying 10
Windows key, identifying 9
Windows operating system DVD 97
Windows Startup Repair, using 92
Windows tools
using 99
wireless and memory module
compartment
identifying 13
wireless antenna
removal 71, 72
spare part number 20, 71, 72
Wireless Antenna Kit, spare part
number 71, 72
wireless antennas, identifying 5
wireless certication label 15
wireless light 7, 10
wireless, product description 2
WLAN antennas, identifying 5
WLAN device 15
WLAN label 15
WLAN module
removal 43
spare part numbers 18, 43
workstation guidelines 27
WWAN antennas, identifying 5
WWAN module
removal 41
spare part numbers 19, 41
124 Index