Printer overview
Paper trays
Supplies, accessories, and parts
- Order supplies, accessories, and parts
- Replace the toner cartridges
  - Introduction
  - Remove and replace the toner cartridges
Print
Copy
- Make a copy
- Copy on both sides (duplex)
  - Copy on both sides automatically
  - Copy on both sides manually
Scan
Fax
- Set up to send and receive faxes
- Send a fax
Manage the printer
Solve problems
Index

HP Color LaserJet Pro M283fdw User Manual

Displayed below is the user manual for Color LaserJet Pro M283fdw by HP which is a product in the Multifunctionals category. This manual has pages.

Related Manuals

HP Color LaserJet Pro M283fdw Manual

HP Enterprise Color Flow MFP 785z+ Manual

Ariete Gourmet Color Manual

HP Color LaserJet Pro MFP M282-M285

www.hp.com/videos/LaserJet

www.hp.com/support/ljM282MFP

User Guide

HP Color LaserJet Pro MFP M282-M285

User Guide

L.P.

Reproduction, adaptation, or translation without

prior written permission is prohibited, except as

allowed under the copyright laws.

The information contained herein is subject to

change without notice.

The only warranties for HP products and

services are set forth in the express warranty

statements accompanying such products and

services. Nothing herein should be construed as

constituting an additional warranty. HP shall not

be liable for technical or editorial errors or

omissions contained herein.

Edition 3, 08/2019

Trademark Credits

Adobe®, Adobe Photoshop®, Acrobat®, and

PostScript® are trademarks of Adobe Systems

Incorporated.

Apple and the Apple logo are trademarks of

Apple Inc., registered in the U.S. and other

countries.

macOS is a trademark of Apple Inc., registered in

the U.S. and other countries.

AirPrint is a trademark of Apple Inc., registered in

the U.S. and other countries.

iPad is a trademark of Apple Inc., registered in

the U.S. and other countries.

iPod is a trademark of Apple Inc., registered in

the U.S. and other countries.

iPhone is a trademark of Apple Inc., registered in

the U.S. and other countries.

Microsoft®, Windows®, Windows® XP, and

Windows Vista® are U.S. registered trademarks

of Microsoft Corporation.

UNIX® is a registered trademark of The Open

Group.

Table of contents

1 Printer overview ........................................................................................................................................................................................ 1

Warning icons ............................................................................................................................................................................ 2

Printer views .............................................................................................................................................................................. 3

Printer front view ................................................................................................................................................. 3

Printer back view .................................................................................................................................................. 4

Control-panel view ............................................................................................................................................... 5

Home screen layout ........................................................................................................................ 6

How to use the touchscreen control panel ................................................................................. 7

Printer specications ................................................................................................................................................................ 8

Technical specications ....................................................................................................................................... 8

Supported operating systems ........................................................................................................................... 8

Mobile printing solutions .................................................................................................................................. 10

Printer dimensions ............................................................................................................................................ 11

Power consumption, electrical specications, and acoustic emissions .................................................... 12

Operating environmental range ...................................................................................................................... 12

Printer hardware setup and software installation ............................................................................................................ 13

2 Paper trays .............................................................................................................................................................................................. 15

Introduction ............................................................................................................................................................................. 16

Load paper to the single-sheet slot (Tray 1) ..................................................................................................................... 16

Introduction ........................................................................................................................................................ 16

Tray 1 paper orientation ................................................................................................................................... 18

Load paper to Tray 2 ............................................................................................................................................................. 19

Introduction ........................................................................................................................................................ 19

Tray 2 paper orientation ................................................................................................................................... 21

Load and print envelopes ..................................................................................................................................................... 23

Introduction ........................................................................................................................................................ 23

Print envelopes .................................................................................................................................................. 23

Envelope orientation ......................................................................................................................................... 24

Load and print labels ............................................................................................................................................................. 25

Introduction ........................................................................................................................................................ 25

Manually feed labels ......................................................................................................................................... 25

ENWW iii

Label orientation ............................................................................................................................................... 26

3 Supplies, accessories, and parts .......................................................................................................................................................... 27

Order supplies, accessories, and parts ............................................................................................................................... 28

Ordering .............................................................................................................................................................. 28

Supplies and accessories ................................................................................................................................. 28

Customer self-repair parts ............................................................................................................................... 29

Replace the toner cartridges ................................................................................................................................................ 30

Introduction ........................................................................................................................................................ 30

Remove and replace the toner cartridges ..................................................................................................... 32

4 Print .......................................................................................................................................................................................................... 35

Print tasks (Windows) ............................................................................................................................................................ 36

How to print (Windows) .................................................................................................................................... 36

Automatically print on both sides (Windows) ............................................................................................... 36

Manually print on both sides (Windows) ........................................................................................................ 37

Print multiple pages per sheet (Windows) .................................................................................................... 37

Select the paper type (Windows) .................................................................................................................... 38

Print tasks (macOS) ............................................................................................................................................................... 39

How to print (macOS) ........................................................................................................................................ 39

Automatically print on both sides (macOS) ................................................................................................... 39

Manually print on both sides (macOS) ........................................................................................................... 39

Print multiple pages per sheet (macOS) ........................................................................................................ 40

Select the paper type (macOS) ........................................................................................................................ 40

Additional print tasks ........................................................................................................................................ 40

Mobile printing ........................................................................................................................................................................ 41

Introduction ........................................................................................................................................................ 41

Wi-Fi Direct (wireless models only) ................................................................................................................ 41

Enable or disable Wi-Fi Direct ..................................................................................................... 42

Change the printer Wi-Fi Direct name ....................................................................................... 42

HP ePrint via email ............................................................................................................................................ 43

HP ePrint software ............................................................................................................................................ 44

AirPrint ................................................................................................................................................................. 44

Android embedded printing ............................................................................................................................. 45

Use walk-up USB printing ..................................................................................................................................................... 46

Introduction ........................................................................................................................................................ 46

Step one: Access USB les on the printer ...................................................................................................... 46

Step two: Print USB documents ...................................................................................................................... 46

Option one: Print documents ...................................................................................................... 46

Option two: Print photos .............................................................................................................. 47

iv ENWW

5 Copy .......................................................................................................................................................................................................... 49

Make a copy ............................................................................................................................................................................. 50

Copy on both sides (duplex) ................................................................................................................................................. 51

Copy on both sides automatically ................................................................................................................... 51

Copy on both sides manually ........................................................................................................................... 51

6 Scan .......................................................................................................................................................................................................... 53

Scan by using the HP Scan software (Windows) ............................................................................................................... 54

Scan by using the HP Smart Software (macOS) ................................................................................................................ 55

Set up the Scan to E-mail feature ....................................................................................................................................... 56

Introduction ........................................................................................................................................................ 56

Before you begin ................................................................................................................................................ 56

Method one: Use the Scan to Email Wizard (Windows) ............................................................................... 56

Method two: Set up the Scan to Email feature via the HP Embedded Web Server ................................ 58

Step one: Access the HP Embedded Web Server (EWS) ......................................................... 58

Step two: Congure the Scan to E-mail feature ....................................................................... 58

Step three: Add contacts to the E-mail Address Book ............................................................ 60

Step four: Congure the default E-mail Options ...................................................................... 60

Set up the Scan to Network Folder feature ........................................................................................................................ 61

Introduction ........................................................................................................................................................ 61

Before you begin ................................................................................................................................................ 61

Method one: Use the Scan to Network Folder Wizard (Windows) ............................................................. 61

Method two: Set up the Scan to Network Folder feature via the HP Embedded Web Server ............... 63

Step one: Access the HP Embedded Web Server (EWS) ......................................................... 63

Step two: Congure the Scan to Network Folder feature ....................................................... 63

Scan to a USB ash drive ...................................................................................................................................................... 65

Scan to email .......................................................................................................................................................................... 66

Scan to a network folder ....................................................................................................................................................... 67

Additional scan tasks ............................................................................................................................................................. 68

7 Fax ............................................................................................................................................................................................................. 69

Set up to send and receive faxes ......................................................................................................................................... 70

Before starting ................................................................................................................................................... 70

Step 1: Identify the phone connection type .................................................................................................. 70

Step 2: Set up the fax ........................................................................................................................................ 71

Dedicated phone line .................................................................................................................... 71

Shared voice/fax line .................................................................................................................... 72

Shared voice/fax line with an answering machine .................................................................. 73

Step 3: Congure the fax time, date, and header ......................................................................................... 74

HP Fax Setup Wizard .................................................................................................................... 74

ENWW v

Printer control panel ..................................................................................................................... 75

HP Embedded Web Server (EWS) and HP Device Toolbox (Windows) ................................. 75

Step 4: Run a fax test ........................................................................................................................................ 76

Send a fax ................................................................................................................................................................................ 77

Fax from the atbed scanner .......................................................................................................................... 77

Fax from the document feeder ....................................................................................................................... 78

Use speed dials and group-dial entries ......................................................................................................... 78

Send a fax from the software .......................................................................................................................... 79

Send a fax from a third-party software program, such as Microsoft Word ............................................. 79

8 Manage the printer ................................................................................................................................................................................. 81

Use HP Web Services applications (touchscreen models only) ...................................................................................... 82

Change the printer connection type (Windows) ................................................................................................................ 83

Advanced conguration with HP Embedded Web Server (EWS) and HP Device Toolbox (Windows) ....................... 84

Congure IP network settings .............................................................................................................................................. 87

Introduction ........................................................................................................................................................ 87

Printer sharing disclaimer ................................................................................................................................ 87

View or change network settings ................................................................................................................... 87

Rename the printer on a network ................................................................................................................... 87

Manually congure IPv4 TCP/IP parameters from the control panel ........................................................ 88

Printer security features ....................................................................................................................................................... 89

Introduction ........................................................................................................................................................ 89

Assign or change the system password using the Embedded Web Server ............................................. 89

Energy-conservation settings .............................................................................................................................................. 90

Introduction ........................................................................................................................................................ 90

Print with EconoMode ....................................................................................................................................... 90

Set the Sleep/Auto O After Inactivity setting .............................................................................................. 90

Set the Shut Down After Inactivity delay and congure the printer to use 1 watt or less of power .... 90

Set the Delay Shut Down setting .................................................................................................................... 91

HP Web Jetadmin ................................................................................................................................................................... 92

Update the rmware .............................................................................................................................................................. 93

Method one: Update the rmware using the control panel ........................................................................ 93

Method two: Update the rmware using the Firmware Update Utility ..................................................... 93

9 Solve problems ....................................................................................................................................................................................... 95

Customer support .................................................................................................................................................................. 96

Control panel help system .................................................................................................................................................... 97

Restore the factory-set defaults ......................................................................................................................................... 98

A “Cartridge is low” or “Cartridge is very low” message displays on the printer control panel ................................. 99

Change the “Very Low” settings ...................................................................................................................... 99

For printers with fax capability ................................................................................................. 100

vi ENWW

Order supplies .................................................................................................................................................. 100

Printer does not pick up paper or misfeeds .................................................................................................................... 101

Introduction ...................................................................................................................................................... 101

The product does not pick up paper ............................................................................................................ 101

The product picks up multiple sheets of paper .......................................................................................... 101

The document feeder jams, skews, or picks up multiple sheets of paper ............................................ 101

Clear paper jams .................................................................................................................................................................. 103

Introduction ...................................................................................................................................................... 103

Paper jam locations ........................................................................................................................................ 103

Experiencing frequent or recurring paper jams? ....................................................................................... 104

Clear paper jams in the document feeder ................................................................................................... 105

Clear paper jams in the single-sheet slot (Tray 1) ..................................................................................... 108

Clear paper jams in Tray 2 ............................................................................................................................. 110

Clear paper jams in the rear door and the fuser area ............................................................................... 112

Clear paper jams in the duplexer (duplex models only) ............................................................................ 114

Clear paper jams in the output bin ............................................................................................................... 116

Improve print quality ........................................................................................................................................................... 118

Introduction ...................................................................................................................................................... 118

Update the printer rmware .......................................................................................................................... 119

Print from a dierent software program ..................................................................................................... 119

Check the paper-type setting for the print job ........................................................................................... 119

Check the paper type setting on the printer .......................................................................... 119

Check the paper type setting (Windows) ................................................................................ 119

Check the paper type setting (macOS) ................................................................................... 119

Check toner-cartridge status ........................................................................................................................ 120

Print a cleaning page ...................................................................................................................................... 120

Visually inspect the toner cartridge or cartridges ...................................................................................... 121

Check paper and the printing environment ................................................................................................ 121

Step one: Use paper that meets HP specications ............................................................... 121

Step two: Check the environment ............................................................................................ 121

Step three: Set the individual tray alignment ........................................................................ 122

Try a dierent print driver .............................................................................................................................. 122

Check the EconoMode settings ..................................................................................................................... 123

Adjust Print Density ........................................................................................................................................ 123

Calibrate the printer to align the colors ....................................................................................................... 124

Adjust color settings (Windows) ................................................................................................................... 124

Print and interpret the print quality page ................................................................................................... 124

Resolving print quality problems ...................................................................................................................................... 126

Introduction ...................................................................................................................................................... 126

Troubleshoot print quality problems ........................................................................................................... 126

Improve copy and scan image quality .............................................................................................................................. 134

ENWW vii

Introduction ...................................................................................................................................................... 134

Check the scanner glass for dirt and smudges .......................................................................................... 134

Eliminate lines or streaks when using the document feeder .................................................................. 135

Check the paper settings ............................................................................................................................... 135

Check the image adjustment settings ......................................................................................................... 135

Optimize for text or pictures ......................................................................................................................... 136

Check the scanner resolution and color settings on the computer ........................................................ 136

Resolution and color guidelines ............................................................................................... 136

Color .............................................................................................................................................. 137

Edge-to-edge copying .................................................................................................................................... 137

Clean the pickup rollers and separation pad in the document feeder .................................................... 138

Improve fax image quality .................................................................................................................................................. 139

Introduction ...................................................................................................................................................... 139

Check the scanner glass for dirt and smudges .......................................................................................... 139

Check the send-fax resolution settings ....................................................................................................... 140

Check the error-correction settings ............................................................................................................. 140

Check the t-to-page setting ........................................................................................................................ 140

Clean the pickup rollers and separation pad in the document feeder .................................................... 141

Send to a dierent fax machine .................................................................................................................... 142

Check the sender's fax machine ................................................................................................................... 142

Solve wired network problems .......................................................................................................................................... 143

Introduction ...................................................................................................................................................... 143

Poor physical connection ............................................................................................................................... 143

The computer is using the incorrect IP address for the printer ............................................................... 143

The computer is unable to communicate with the printer ....................................................................... 144

The printer is using incorrect link and duplex settings for the network ................................................. 144

New software programs might be causing compatibility problems ....................................................... 144

The computer or workstation might be set up incorrectly ....................................................................... 144

The printer is disabled, or other network settings are incorrect ............................................................. 144

Solve wireless network problems ..................................................................................................................................... 145

Introduction ...................................................................................................................................................... 145

Wireless connectivity checklist ...................................................................................................................... 145

The printer does not print after the wireless conguration completes .................................................. 146

The printer does not print, and the computer has a third-party rewall installed ............................... 146

The wireless connection does not work after moving the wireless router or printer .......................... 146

Cannot connect more computers to the wireless printer ......................................................................... 146

The wireless printer loses communication when connected to a VPN ................................................... 147

The network does not appear in the wireless networks list .................................................................... 147

The wireless network is not functioning ..................................................................................................... 147

Perform a wireless network diagnostic test ............................................................................................... 147

Reduce interference on a wireless network ................................................................................................ 147

viii ENWW

Solve fax problems .............................................................................................................................................................. 149

Introduction ...................................................................................................................................................... 149

Fax troubleshooting checklist ....................................................................................................................... 149

Solve general fax problems ........................................................................................................................... 150

Faxes are sending slowly ........................................................................................................... 150

Fax quality is poor ...................................................................................................................... 151

Fax cuts o or prints on two pages ......................................................................................... 152

Index ........................................................................................................................................................................................................... 153

ENWW ix

x ENWW

1 Printer overview

●Warning icons

●Printer views

●Printer specications

●Printer hardware setup and software installation

For more information:

The following information is correct at the time of publication. For current information, see www.hp.com/

support/ljM282MFP.

HP's all-inclusive help for the printer includes the following information:

●Install and congure

●Learn and use

●Solve problems

●Download software and rmware updates

●Join support forums

●Find warranty and regulatory information

ENWW 1

Warning icons

Warning icon denitions: The following warning icons may appear on HP products. Apply appropriate caution

where applicable.

●

Caution: Electric shock

●

Caution: Hot surface

●

Caution: Keep body parts away from moving parts

●

Caution: Sharp edge in close proximity

2 Chapter 1 Printer overview ENWW

Printer views

●Printer front view

●Printer back view

●Control-panel view

Printer front view

Table 1-1 Printer front view legend

Number Description

1 Document feeder

2 Control panel with color touchscreen display

3 Walk-up USB port for printing and scanning without a computer

4 Output bin

5 Output bin extension

6 Front door (access to the toner cartridges)

7 Model name

8 Single-sheet priority feed slot (Tray 1)

9 Main input tray (Tray 2)

10 Power button

11 Scanner

ENWW Printer views 3

Printer back view

Table 1-2 Printer back view legend

Number Description

1 Rear door (access for clearing jams)

2 Serial number and product number label

3 Power connection

4 USB interface port

5 Ethernet port

6 Fax “line in” port for attaching the fax phone line to the printer (fax models only)

7 Telephone “line out” port for attaching an extension phone, answering machine, or other device (fax models only)

8 Duplexer (duplex models only)

4 Chapter 1 Printer overview ENWW

Control-panel view

4 5

Table 1-3 Control panel legend

Number Control panel component Function

1Back button Returns to the previous screen

2Home button Provides access to the Home screen

3Help button Provides access to the control-panel help system

4 Color touchscreen Provides access to menus, help animations, and printer

information.

5 Home page screen indicator The display indicates which Home screen the control panel

is currently displaying.

NOTE: While the control panel does not have a standard Cancel button, during many printer processes a Cancel

button appears on the touchscreen. This permits users to cancel a process before the printer completes it.

ENWW Printer views 5

Home screen layout

The Home screen provides access to the printer features and indicates the current status of the printer.

Return to the Home screen at any time by touching the Home button on the printer control panel.

NOTE: The features that appear on the Home screen can vary, depending on the printer conguration.

34 5 6

710

Table 1-4 Home screen legend

Number Home screen component Function

1Reset button Touch this button to reset any temporary job settings to the default printer settings.

2 Connection Information

button

Touch this button to open the Connection Information menu, which provides network

information. The button appears as either a wired network icon or a wireless network icon

, depending on the type of network to which the printer is connected.

3 Printer status This screen area provides information about the overall printer status.

4Copy button Touch this button to open the copy feature.

5Scan button Touch this button to open the scan features:

●Scan to USB Drive

●Scan to Network Folder

●Scan to E-mail

6Fax button Touch this button to open the fax features.

7USB button Touch this button to open the USB Flash Drive menu.

8Supplies button Touch this button to view information about supplies status.

9Apps button

Touch this button to open the Apps menu to print directly from select Web applications.

10 Setup button Touch this button to open the Setup menu.

6 Chapter 1 Printer overview ENWW

How to use the touchscreen control panel

Use the following actions to use the printer touchscreen control panel.

Table 1-5 Touchscreen control panel actions

Action Description Example

Touch Touch an item on the screen to select that item

or open that menu. Also, when scrolling through

menus, briey touch the screen to stop the

scrolling.

Touch the Setup button to open the Setup

menu.

Swipe Touch the screen and then move the nger

horizontally to move the screen sideways.

Swipe the Home screen to access the Setup

button .

Scroll Touch the screen, and then, without lifting the

nger, move the nger vertically to move the

screen.

Scroll through the Setup menu.

ENWW Printer views 7

Printer specications

IMPORTANT: The following specications are correct at the time of publication, but they are subject to change.

For current information, see www.hp.com/support/ljM282MFP.

●Technical specications

●Supported operating systems

●Mobile printing solutions

●Printer dimensions

●Power consumption, electrical specications, and acoustic emissions

●Operating environmental range

Technical specications

See www.hp.com/support/ljM282MFP for current information.

Supported operating systems

The following information applies to the printer-specic Windows PCL 6 and HP print drivers for macOS and to

the software installer.

Windows: The HP Software Installer installs the “HP PCL.6” version 3 print driver, the “HP PCL 6” version 3 print

driver, or the “HP PCL-6” version 4 print driver, depending on the Windows operating system, along with optional

software when using the software installer. Download the "HP PCL.6" version 3 print driver, the "HP PCL 6"

version 3 print driver, and the "HP PCL-6" version 4 print driver from the printer-support website for this printer:

www.hp.com/support/ljM282MFP.

macOS: Mac computers are supported with this printer. Download HP Smart either from 123.hp.com or from the

Printer Support page, and then use HP Smart to install the HP print driver. HP Smart is not included in the

HP Software Installer.

1. Go to 123.hp.com.

2. Follow the steps provided to download the printer software.

Linux: For information and print drivers for Linux, go to www.hp.com/go/linuxprinting.

UNIX: For information and print drivers for UNIX®, go to www.hp.com/go/unixmodelscripts.

Table 1-6 Supported operating systems and print drivers

Operating system Print driver installed (from the software on

the web)

Notes

Windows® XP SP3, 32-bit The “HP PCL.6” printer-specic print driver is

installed for this operating system as part of

the software installation.

Microsoft retired mainstream support for

Windows XP in April 2009. HP will continue

to provide best eort support for the

discontinued XP operating system. Some

features of the print driver are not

supported.

8 Chapter 1 Printer overview ENWW

Table 1-6 Supported operating systems and print drivers (continued)

Operating system Print driver installed (from the software on

the web)

Notes

Windows Vista®, 32-bit The “HP PCL.6” printer-specic print driver is

installed for this operating system as part of

the software installation.

Microsoft retired mainstream support for

Windows Vista in April 2012. HP will

continue to provide best eort support for

the discontinued Vista operating system.

Some features of the print driver are not

supported.

Windows 7, 32-bit and 64-bit The “HP PCL 6” printer-specic print driver is

installed for this operating system as part of

the software installation.

This operating system is fully supported.

Windows 8, 32-bit and 64-bit The “HP PCL 6” printer-specic print driver is

installed for this operating system as part of

the software installation.

Windows 8 RT support is provided through

Microsoft IN OS Version 4, 32- bit driver.

Windows 8.1, 32-bit and 64-bit The “HP PCL-6” V4 printer-specic print

driver is installed for this operating system

as part of the software installation.

Windows 8.1 RT support is provided through

Microsoft IN OS Version 4, 32- bit driver.

Windows 10, 32-bit and 64-bit The “HP PCL-6” V4 printer-specic print

driver is installed for this operating system

as part of the software installation.

This operating system is fully supported.

Windows Server 2008 SP2, 32-bit The “HP PCL.6” printer-specic print driver is

available for download from the printer-

support website. Download the driver, and

then use the Microsoft Add Printer tool to

install it.

Microsoft retired mainstream support for

Windows Server 2008 in January 2015. HP

will continue to provide best eort support

for the discontinued Server 2008 operating

system. Some features of the print driver

are not supported.

Windows Server 2008 SP2, 64-bit The “HP PCL 6” printer-specic print driver is

available for download from the printer-

support website. Download the driver, and

then use the Microsoft Add Printer tool to

install it.

Microsoft retired mainstream support for

Windows Server 2008 in January 2015. HP

will continue to provide best eort support

for the discontinued Server 2008 operating

system.

Windows Server 2008 R2, SP 1, 64-bit The “HP PCL 6” printer-specic print driver is

installed for this operating system as part of

the software installation.

This operating system is fully supported.

Windows Server 2012, 64-bit The “HP PCL 6” printer-specic print driver is

installed for this operating system as part of

the software installation.

This operating system is fully supported.

Windows Server 2012 R2, 64-bit The “HP PCL-6” printer-specic print driver is

installed for this operating system as part of

the software installation.

This operating system is fully supported.

Windows 10 server (Server 2016), 32-bit

and 64-bit

The “HP PCL-6” printer-specic print driver is

installed for this operating system as part of

the software installation.

This operating system is fully supported.

macOS v10.15 Catalina, macOS v10.14

Mojave, macOS v10.13 High Sierra, macOS

v10.12 Sierra

To install the print driver, download

HP Smart from 123.hp.com. Follow the

steps provided to install the printer software

and print driver.

This operating system is fully supported.

NOTE: For a current list of supported operating systems, go to www.hp.com/support/ljM282MFP for HP's all-

inclusive help for the printer.

ENWW Printer specications 9

NOTE: For HP UPD driver support for this printer, go to www.hp.com/go/upd. Under Additional information,

click the links.

Table 1-7 Minimum system requirements

Windows macOS

●Internet connection

●Dedicated USB 1.1 or 2.0 connection or a network connection

●400 MB of available hard-disk space

●1 GB RAM (32-bit) or 2 GB RAM (64-bit)

●Internet connection

●1 GB of available hard-disk space

Mobile printing solutions

HP oers multiple mobile and ePrint solutions to enable easy printing to an HP printer from a laptop, tablet,

smartphone, or other mobile device. To see the full list and to determine the best choice, go to www.hp.com/go/

LaserJetMobilePrinting.

NOTE: Update the printer rmware to ensure all mobile printing and ePrint capabilities are supported.

●Wi-Fi Direct (wireless models only)

●HP ePrint via email (Requires HP Web Services to be enabled and the printer to be registered with

HP Connected)

●HP ePrint app (Available for Android, iOS, and Blackberry)

●HP Smart app for iOS and Android devices

●HP ePrint software

●Google Cloud Print

●AirPrint

●Android Printing

10 Chapter 1 Printer overview ENWW

Printer dimensions

Figure 1-1 Dimensions for the nw models

Table 1-8 Dimensions for the nw models

Dimension Printer fully closed Printer fully open

1. Height 334.1 mm (13.2 in) 590 mm (23.2 in)

2. Depth 388.6 mm (15.3 in) 855 mm (33.7 in)

3. Width 420 mm (16.5 in) 453 mm (17.8 in)

Weight (with cartridges) 18 kg (39.7 lb) 18 kg (39.7 lb)

Figure 1-2 Dimensions for the cdw, fdn and fdw models

ENWW Printer specications 11

Table 1-9 Dimensions for the cdw, fdn and fdw models

Dimension Printer fully closed Printer fully open

1. Height 334.1 mm (13.2 in) 590 mm (23.2 in)

2. Depth 421.7 mm (16.6 in) 1008 mm (39.7 in)

3. Width 420 mm (16.5 in) 453 mm (17.8 in)

Weight (with cartridges) 18.7 kg (41.2 lb) 18.7 kg (41.2 lb)

Power consumption, electrical specications, and acoustic emissions

See www.hp.com/support/ljM282MFP for current information.

CAUTION: Power requirements are based on the country/region where the printer is sold. Do not convert

operating voltages. This will damage the printer and void the printer warranty.

Operating environmental range

Table 1-10 Operating environmental range

Environment Recommended Allowed

Temperature 15° to 27°C (59° to 80.6°F) 10° to 32.5°C (50° to 90.5°F)

Relative humidity 30% to 70% relative humidity (RH) 10% to 80% (RH)

12 Chapter 1 Printer overview ENWW

Printer hardware setup and software installation

For basic setup instructions, see the Setup Poster and Getting Started Guide that came with the printer. For

additional instructions, go to HP support on the Web.

Go to www.hp.com/support/ljM282MFP for HP's all-inclusive help for the printer. Find the following support:

●Install and congure

●Learn and use

●Solve problems

●Download software and rmware updates

●Join support forums

●Find warranty and regulatory information

ENWW Printer hardware setup and software installation 13

14 Chapter 1 Printer overview ENWW

2 Paper trays

●Introduction

●Load paper to the single-sheet slot (Tray 1)

●Load paper to Tray 2

●Load and print envelopes

●Load and print labels

For more information:

The following information is correct at the time of publication. For current information, see www.hp.com/

support/ljM282MFP.

HP's all-inclusive help for the printer includes the following information:

●Install and congure

●Learn and use

●Solve problems

●Download software and rmware updates

●Join support forums

●Find warranty and regulatory information

ENWW 15

Introduction

CAUTION: Do not extend more than one paper tray at a time.

Do not use paper tray as a step.

Keep hands out of paper trays when closing.

All trays must be closed when moving the printer.

Load paper to the single-sheet slot (Tray 1)

Introduction

The following information describes how to load paper in Tray 1. This tray holds 1 sheet of paper, use it to print

single-page documents, documents that require multiple paper types, or envelopes.

NOTE: To avoid paper jams:

●Never add or remove paper from the tray during printing.

●Use paper that is not wrinkled, folded, or damaged.

1. Move the paper width guides in the single-sheet

priority feed slot outward.

2. Place the top edge of the sheet at the opening, and

then adjust the side guides so that they lightly

touch the sheet, but do not bend it.

16 Chapter 2 Paper trays ENWW

3. Insert the single sheet into the slot and hold it. The

printer will pull the sheet partially into the paper

path. For information about how to orient the

paper, see Tray 1 paper orientation on page 18.

NOTE: Depending on the size of the paper, you

might need to support the sheet with two hands

until the sheet advances into the printer.

4. At the computer, begin the printing process from

the software application. Make sure that the driver

is set to the correct paper type and size for the

paper being printed from the single-sheet priority

feed slot.

ENWW Load paper to the single-sheet slot (Tray 1) 17

Tray 1 paper orientation

When using paper that requires a specic orientation, load it according to the information in the following table.

Table 2-1 Tray 1 paper orientation

Paper type Image orientation Output Paper size How to load paper

Letterhead or

Preprinted

Portrait

NOTE: In Tray 1, A5

paper can be oriented

for both Landscape

and Portrait printing.

1-sided printing Letter, Legal, Executive,

Ocio (8.5 x 13), A4, A5, A6, B5 (JIS),

B5 (ISO), Postcard #10, Japanese

Postcard (Postcard (JIS)), Double

Japan Postcard Rotated (Double

Postcard (JIS))

Face-up

Top edge leading into the printer

123

Letterhead or

Preprinted

Portrait 2-sided printing Letter, Legal, Executive,

Ocio (8.5 x 13), A4, A5, A6, B5 (JIS),

B5 (ISO), Postcard #10, Japanese

Postcard (Postcard (JIS)), Double

Japan Postcard Rotated (Double

Postcard (JIS))

Face-down

Top edge leading into the printer

Prepunched Portrait

NOTE: In Tray 1, A5

paper can be oriented

for both Landscape

and Portrait printing.

1-sided printing or 2-

sided printing

Letter, Legal, Executive,

Ocio (8.5 x 13), A4, A5, A6, B5 (JIS),

B5 (ISO), Postcard #10, Japanese

Postcard (Postcard (JIS)), Double

Japan Postcard Rotated (Double

Postcard (JIS))

Face-up

Holes toward the left side of the

printer

18 Chapter 2 Paper trays ENWW

Load paper to Tray 2

Introduction

The following information describes how to load paper in Tray 2. This tray holds up to 250 sheets of 75 g/m2 (20

lb) paper.

NOTE: To avoid paper jams:

●Never add or remove paper from the tray during printing.

●Before loading the tray, remove all of the paper from the input tray and straighten the stack.

●When loading the tray, do not fan the paper.

●Use paper that is not wrinkled, folded, or damaged.

1. Open the tray.

NOTE: Do not open this tray while it is in use.

2. Adjust the paper guides by squeezing the

adjustment latches and sliding the guides to the

size of the paper being used.

NOTE: To load legal-size paper, extend the tray

front by pressing the blue latch and pulling the

front of the tray. When loaded with legal-size

paper, Tray 2 extends from the front of the printer

approximately 57.5 mm (2.2 in).

ENWW Load paper to Tray 2 19

3. Load the paper into the tray. For information about

how to orient the paper, see Tray 2 paper

orientation on page 21.

4. Adjust the guides so that they lightly touch the

paper stack, but do not bend it.

NOTE: Do not adjust the paper guides tightly

against the paper stack.

NOTE: To prevent jams, adjust the paper guides

to the correct size and do not overll the tray.

5. Close the tray.

20 Chapter 2 Paper trays ENWW

Tray 2 paper orientation

When using paper that requires a specic orientation, load it according to the information in the following table.

Table 2-2 Tray 2 paper orientation

Paper type Image orientation Output Paper size How to load paper

Letterhead or

preprinted

Portrait 1-sided printing Letter, Legal, Executive,

Ocio (8.5 x 13), A4, A6, B5 (JIS),

B5 (ISO), Postcard #10, Japanese

Postcard (Postcard (JIS)), Double

Japan Postcard Rotated (Double

Postcard (JIS))

Face-up

Top edge toward the back of the

tray

123

Letterhead or

preprinted

Portrait 2-sided printing Letter, Legal, Executive,

Ocio (8.5 x 13), A4, A6, B5 (JIS),

B5 (ISO), Postcard #10, Japanese

Postcard (Postcard (JIS)), Double

Japan Postcard Rotated (Double

Postcard (JIS))

Face-down

Top edge toward the back of the

tray

123

Letterhead or

preprinted

Landscape 1-sided printing A5 Face-up

Top edge toward the back of the

tray

ENWW Load paper to Tray 2 21

Table 2-2 Tray 2 paper orientation (continued)

Paper type Image orientation Output Paper size How to load paper

Letterhead or

preprinted

Landscape 2-sided printing A5 Face-down

Top edge toward the back of the

tray

Prepunched Portrait 1-sided printing or 2-

sided printing

Letter, Legal, Executive,

Ocio (8.5 x 13), A4, A6, B5 (JIS),

B5 (ISO), Postcard #10, Japanese

Postcard (Postcard (JIS)), Double

Japan Postcard Rotated (Double

Postcard (JIS))

Face-up

Holes toward the left side of the

tray

Prepunched Landscape 1-sided printing or 2-

sided printing

A5 Face-up

Holes toward the front of the tray

22 Chapter 2 Paper trays ENWW

Load and print envelopes

Introduction

The following information describes how to print and load envelopes. Tray 1 holds 1 envelope. Tray 2 holds up to

5 envelopes.

To print envelopes using the manual feed option, follow these steps to select the correct settings in the print

driver, and then load the envelopes into the tray after sending the print job to the printer.

Print envelopes

1. From the software program, select the Print option.

2. Select the printer from the list of printers, and then click or tap the Properties or Preferences button to

open the print driver.

NOTE: The name of the button varies for dierent software programs.

NOTE: To access these features from a Windows 8 or 8.1 Start screen, select Devices, select Print, and

then select the printer.

3. Click or tap the Paper/Quality tab.

4. In the Paper size drop-down list, select the correct size for the envelopes.

5. In the Paper type drop-down list, select Envelope.

6. In the Paper source drop-down list, select Manual feed.

7. Click the OK button to close the Document Properties dialog box.

8. In the Print dialog box, click the OK button to print the job.

ENWW Load and print envelopes 23

Envelope orientation

Table 2-3 Envelope orientation

Tray Envelope size How to load envelopes

Tray 1 Envelope #10, Envelope Monarch,

Envelope B5, Envelope C5, Envelope DL

Face up

Short, postage end leading into the printer

Tray 2 Envelope #10, Envelope Monarch,

Envelope B5, Envelope C5, Envelope DL

Face up

Short, postage end leading into the printer

24 Chapter 2 Paper trays ENWW

Load and print labels

Introduction

The following information describes how to print and load labels. Tray 1 holds 1 sheet of labels. Tray 2 holds up

to 50 sheets of labels.

To print labels using the manual feed option, follow these steps to select the correct settings in the print driver,

and then load the labels into the tray after sending the print job to the printer. When using manual feed, the

printer waits to print the job until it detects that the tray has been opened.

Manually feed labels

1. From the software program, select the Print option.

2. Select the printer from the list of printers, and then click or tap the Properties or Preferences button to

open the print driver.

NOTE: The name of the button varies for dierent software programs.

NOTE: To access these features from a Windows 8 or 8.1 Start screen, select Devices, select Print, and

then select the printer.

3. Click the Paper/Quality tab.

4. In the Paper size drop-down list, select the correct size for the sheets of labels.

5. In the Paper type drop-down list, select Labels.

6. In the Paper source drop-down list, select Manual feed.

7. Click the OK button to close the Document Properties dialog box.

8. In the Print dialog box, click the OK button to print the job.

ENWW Load and print labels 25

Label orientation

Table 2-4 Label orientation

Tray How to load labels

Tray 1 Face-up

Top edge leading into the printer

Tray 2 Face-up

Top edge leading into the printer

26 Chapter 2 Paper trays ENWW

3 Supplies, accessories, and parts

●Order supplies, accessories, and parts

●Replace the toner cartridges

For more information:

The following information is correct at the time of publication. For current information, see www.hp.com/

support/ljM282MFP.

HP's all-inclusive help for the printer includes the following information:

●Install and congure

●Learn and use

●Solve problems

●Download software and rmware updates

●Join support forums

●Find warranty and regulatory information

ENWW 27

Order supplies, accessories, and parts

Ordering

Table 3-1 Ordering options

Ordering option Ordering information

Order supplies and paper www.hp.com/go/suresupply

Order genuine HP parts or accessories www.hp.com/buy/parts

Order through service or support providers Contact an HP-authorized service or support provider.

Order using the HP Embedded Web Server (EWS) To access, in a supported Web browser on the computer, enter the

printer IP address or host name in the address/URL eld. The EWS

contains a link to the HP SureSupply Web site, which provides

options for purchasing Original HP supplies.

Supplies and accessories

Table 3-2 North America, Latin America, Asia Pacic Countries/Regions, and Japan

Item Description Cartridge number Part number

HP 206A Black Original LaserJet Toner

Cartridge

Standard-capacity replacement black toner

cartridge

206A W2110A

HP 206X High Yield Black Original

LaserJet Toner Cartridge

High-capacity replacement black toner cartridge 206X W2110X

HP 206A Cyan Original LaserJet Toner

Cartridge

Standard-capacity replacement cyan toner

cartridge

206A W2111A

HP 206X High Yield Cyan Original

LaserJet Toner Cartridge

High-capacity replacement cyan toner cartridge 206X W2111X

HP 206A Yellow Original LaserJet Toner

Cartridge

Standard-capacity replacement yellow toner

cartridge

206A W2112A

HP 206X High Yield Yellow Original

LaserJet Toner Cartridge

High-capacity replacement yellow toner

cartridge

206X W2112X

HP 206A Magenta Original LaserJet

Toner Cartridge

Standard-capacity replacement magenta toner

cartridge

206A W2113A

HP 206X High Yield Magenta Original

LaserJet Toner Cartridge

High-capacity replacement magenta toner

cartridge

206X W2113X

Table 3-3 Europe, Russia, CIS, Middle East, and Africa

Item Description Cartridge number Part number

HP 207A Black Original LaserJet

Toner Cartridge

Standard-capacity replacement

black toner cartridge

207A W2210A

HP 207X High Yield Black Original

LaserJet Toner Cartridge

High-capacity replacement black

toner cartridge

207X W2210X

HP 207A Cyan Original LaserJet

Toner Cartridge

Standard-capacity replacement

cyan toner cartridge

207A W2211A

28 Chapter 3 Supplies, accessories, and parts ENWW

Table 3-3 Europe, Russia, CIS, Middle East, and Africa (continued)

Item Description Cartridge number Part number

HP 207X High Yield Cyan Original

LaserJet Toner Cartridge

High-capacity replacement cyan

toner cartridge

207X W2211X

HP 207A Yellow Original LaserJet

Toner Cartridge

Standard-capacity replacement

yellow toner cartridge

207A W2212A

HP 207X High Yield Yellow Original

LaserJet Toner Cartridge

High-capacity replacement yellow

toner cartridge

207X W2212X

HP 207A Magenta Original LaserJet

Toner Cartridge

Standard-capacity replacement

magenta toner cartridge

207A W2213A

HP 207X High Yield Magenta

Original LaserJet Toner Cartridge

High-capacity replacement

magenta toner cartridge

207X W2213X

Customer self-repair parts

Customer Self-Repair (CSR) parts are available for many HP LaserJet printers to reduce repair time. More

information about the CSR program and benets can be found at www.hp.com/go/csr-support and

www.hp.com/go/csr-faq.

Genuine HP replacement parts can be ordered at www.hp.com/buy/parts or by contacting an HP-authorized

service or support provider. When ordering, one of the following will be needed: part number, serial number

(found on back of printer), product number, or printer name.

●Parts listed as Mandatory self-replacement are to be installed by customers, unless you are willing to pay

HP service personnel to perform the repair. For these parts, on-site or return-to-depot support is not

provided under the HP printer warranty.

●Parts listed as Optional self-replacement can be installed by HP service personnel at your request for no

additional charge during the printer warranty period.

Table 3-4 Customer self-repair parts

Item Description

Self-replacement

options Part number

Single-sheet priority feed slot tray Replacement tray for single-sheet priority feed

slot (Tray 1)

Mandatory RM2-1693-000

250-sheet paper input tray Replacement cassette for Tray 2 Mandatory RM2-1683-000

ENWW Order supplies, accessories, and parts 29

Replace the toner cartridges

Introduction

This printer indicates when the toner cartridge level is low. The actual toner cartridge life remaining can vary.

Consider having a replacement cartridge available to install when print quality is no longer acceptable.

To purchase cartridges or check cartridge compatibility for the printer, go to HP SureSupply at www.hp.com/go/

suresupply. Scroll to the bottom of the page and verify that the country/region is correct.

The printer uses four colors and has a dierent toner cartridge for each color: yellow (Y), magenta (M), cyan (C),

and black (K). The toner cartridges are inside the front door.

Table 3-5 Toner cartridges for North America, Latin America, Asia Pacic Countries/Regions, and Japan

Item Description Cartridge number Part number

HP 206A Black Original LaserJet

Toner Cartridge

Standard-capacity replacement black toner

cartridge

206A W2110A

HP 206X High Yield Black Original

LaserJet Toner Cartridge

High-capacity replacement black toner

cartridge

206X W2110X

HP 206A Cyan Original LaserJet

Toner Cartridge

Standard-capacity replacement cyan toner

cartridge

206A W2111A

HP 206X High Yield Cyan Original

LaserJet Toner Cartridge

High-capacity replacement cyan toner

cartridge

206X W2111X

HP 206A Yellow Original LaserJet

Toner Cartridge

Standard-capacity replacement yellow

toner cartridge

206A W2112A

HP 206X High Yield Yellow Original

LaserJet Toner Cartridge

High-capacity replacement yellow toner

cartridge

206X W2112X

HP 206A Magenta Original LaserJet

Toner Cartridge

Standard-capacity replacement magenta

toner cartridge

206A W2113A

HP 206X High Yield Magenta

Original LaserJet Toner Cartridge

High-capacity replacement magenta toner

cartridge

206X W2113X

Table 3-6 Toner cartridges for Europe, Russia, CIS, Middle East, and Africa

Item Description Cartridge number Part number

HP 207A Black Original LaserJet

Toner Cartridge

Standard-capacity replacement

black toner cartridge

207A W2210A

HP 207X High Yield Black

Original LaserJet Toner Cartridge

High-capacity replacement black

toner cartridge

207X W2210X

HP 207A Cyan Original LaserJet

Toner Cartridge

Standard-capacity replacement

cyan toner cartridge

207A W2211A

HP 207X High Yield Cyan

Original LaserJet Toner Cartridge

High-capacity replacement cyan

toner cartridge

207X W2211X

HP 207A Yellow Original

LaserJet Toner Cartridge

Standard-capacity replacement

yellow toner cartridge

207A W2212A

HP 207X High Yield Yellow

Original LaserJet Toner Cartridge

High-capacity replacement

yellow toner cartridge

207X W2212X

30 Chapter 3 Supplies, accessories, and parts ENWW

Table 3-6 Toner cartridges for Europe, Russia, CIS, Middle East, and Africa (continued)

Item Description Cartridge number Part number

HP 207A Magenta Original

LaserJet Toner Cartridge

Standard-capacity replacement

magenta toner cartridge

207A W2213A

HP 207X High Yield Magenta

Original LaserJet Toner Cartridge

High-capacity replacement

magenta toner cartridge

207X W2213X

NOTE: High-yield toner cartridges contain more toner than standard cartridges for increased page yield. For

more information, go to www.hp.com/go/learnaboutsupplies.

Do not remove the toner cartridge from its package until it is time to install it.

CAUTION: To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes.

Cover the green imaging drum if the toner cartridge must be removed from the printer for an extended period of

time.

The following illustration shows the toner-cartridge components.

Table 3-7 Toner cartridge legend

Number Description

1 Handle

2 Imaging drum

3 Memory chip

CAUTION: If toner gets on clothing, wipe it o by using a dry cloth and wash the clothes in cold water. Hot water

sets toner into fabric.

ENWW Replace the toner cartridges 31

NOTE: Information about recycling used toner cartridges is in the toner cartridge box.

Remove and replace the toner cartridges

1. Open the front door.

2. Grasp the blue handle on the toner cartridge

drawer, and then pull out the drawer.

3. Grasp the handle on the toner cartridge, and then

pull the toner cartridge straight up to remove it.

32 Chapter 3 Supplies, accessories, and parts ENWW

4. Remove the new toner cartridge package from the

box, and then pull the release tab on the

packaging.

5. Remove the toner cartridge from the opened

packaging shell. Save all packaging for recycling

the used toner cartridge.

NOTE: Avoid touching the green imaging drum.

Fingerprints on the imaging drum can cause print

defects.

6. Holding the toner on both ends, gently rock the

toner cartridge end to end to distribute the toner

evenly inside the cartridge.

ENWW Replace the toner cartridges 33

7. Install the new toner cartridge. Make sure that the

color chip on the cartridge matches the color chip

on the drawer.

NOTE: Avoid touching the green imaging drum.

Fingerprints on the imaging drum can cause print

defects.

8. Close the toner cartridge drawer.

9. Close the front door.

34 Chapter 3 Supplies, accessories, and parts ENWW

4 Print

●Print tasks (Windows)

●Print tasks (macOS)

●Mobile printing

●Use walk-up USB printing

For more information:

The following information is correct at the time of publication. For current information, see www.hp.com/

support/ljM282MFP.

HP's all-inclusive help for the printer includes the following information:

●Install and congure

●Learn and use

●Solve problems

●Download software and rmware updates

●Join support forums

●Find warranty and regulatory information

ENWW 35

Print tasks (Windows)

How to print (Windows)

The following procedure describes the basic printing process for Windows.

1. From the software program, select the Print option.

2. Select the printer from the list of printers. To change settings, click the Properties or Preferences button to

open the print driver.

NOTE: The name of the button varies for dierent software programs.

NOTE: In Windows 10, 8.1, and 8, these applications will have a dierent layout with dierent features

from what is described below for desktop applications. To access the print feature from a Start screen app,

complete the following steps:

●Windows 10: Select Print, and then select the printer.

●Windows 8.1 or 8: Select Devices, select Print, and then select the printer.

For the HP PCL-6 V4 driver, the HP Smart application downloads additional driver features when More

settings is selected.

NOTE: For more information, click the Help (?) button in the print driver.

3. Click the tabs in the print driver to congure the available options. For example, set the paper orientation

on the Finishing tab, and set the paper source, paper type, paper size, and quality settings on the Paper/

Quality tab.

4. Click the OK button to return to the Print dialog box. Select the number of copies to print from this screen.

5. Click the Print button to print the job.

Automatically print on both sides (Windows)

Use this procedure for printers that have an automatic duplexer installed. If the printer does not have an

automatic duplexer installed, or to print on paper types that the duplexer does not support, print on both sides

manually.

1. From the software program, select the Print option.

2. Select the printer from the list of printers, and then click the Properties or Preferences button to open the

print driver.

NOTE: The name of the button varies for dierent software programs.

NOTE: In Windows 10, 8.1, and 8, these applications will have a dierent layout with dierent features

from what is described below for desktop applications. To access the print feature from a Start screen app,

complete the following steps:

●Windows 10: Select Print, and then select the printer.

●Windows 8.1 or 8: Select Devices, select Print, and then select the printer.

For the HP PCL-6 V4 driver, the HP Smart application downloads additional driver features when More

settings is selected.

36 Chapter 4 Print ENWW

3. Click the Finishing tab.

4. Select Print on both sides. Click OK to close the Document Properties dialog.

5. In the Print dialog, click Print to print the job.

Manually print on both sides (Windows)

Use this procedure for printers that do not have an automatic duplexer installed or to print on paper that the

duplexer does not support.

1. From the software program, select the Print option.

2. Select the printer from the list of printers, and then click the Properties or Preferences button to open the

print driver.

NOTE: The name of the button varies for dierent software programs.

NOTE: In Windows 10, 8.1, and 8, these applications will have a dierent layout with dierent features

from what is described below for desktop applications. To access the print feature from a Start screen app,

complete the following steps:

●Windows 10: Select Print, and then select the printer.

●Windows 8.1 or 8: Select Devices, select Print, and then select the printer.

For the HP PCL-6 V4 driver, the HP Smart application downloads additional driver features when More

settings is selected.

3. Click the Finishing tab.

4. Select Print on both sides (manually), and then click OK to close the Document Properties dialog.

5. In the Print dialog, click Print to print the rst side of the job.

6. Retrieve the printed stack from the output bin, and place it in Tray 1.

7. If prompted, select the appropriate control panel button to continue.

Print multiple pages per sheet (Windows)

1. From the software program, select the Print option.

2. Select the printer from the list of printers, and then click the Properties or Preferences button to open the

print driver.

NOTE: The name of the button varies for dierent software programs.

NOTE: In Windows 10, 8.1, and 8, these applications will have a dierent layout with dierent features

from what is described below for desktop applications. To access the print feature from a Start screen app,

complete the following steps:

●Windows 10: Select Print, and then select the printer.

●Windows 8.1 or 8: Select Devices, select Print, and then select the printer.

For the HP PCL-6 V4 driver, the HP Smart application downloads additional driver features when More

settings is selected.

ENWW Print tasks (Windows) 37

3. Click the Finishing tab.

4. Select the number of pages per sheet from the Pages per sheet drop-down list.

5. Select the correct Print page borders, Page order, and Orientation options. Click OK to close the Document

Properties dialog.

6. In the Print dialog, click Print to print the job.

Select the paper type (Windows)

1. From the software program, select the Print option.

2. Select the printer from the list of printers, and then click or tap the Properties or Preferences button to

open the print driver.

NOTE: The name of the button varies for dierent software programs.

NOTE: In Windows 10, 8.1, and 8, these applications will have a dierent layout with dierent features

from what is described below for desktop applications. To access the print feature from a Start screen app,

complete the following steps:

●Windows 10: Select Print, and then select the printer.

●Windows 8.1 or 8: Select Devices, select Print, and then select the printer.

For the HP PCL-6 V4 driver, the HP Smart application downloads additional driver features when More

settings is selected.

3. Click the Paper/Quality tab.

4. Select the option for the type of paper you are using, and then click OK.

5. Click OK to close the Document Properties dialog.

6. In the Print dialog, click Print to print the job.

38 Chapter 4 Print ENWW

Print tasks (macOS)

How to print (macOS)

The following procedure describes the basic printing process for macOS.

1. Click the File menu, and then click the Print option.

2. Select the printer.

3. Click Show Details or Copies & Pages, and then select other menus to adjust the print settings.

NOTE: The name of the item varies for dierent software programs.

4. Click the Print button.

Automatically print on both sides (macOS)

NOTE: This information applies to printers that include an automatic duplexer.

NOTE: This feature is available if you install the HP print driver. It might not be available if you are using AirPrint.

1. Click the File menu, and then click the Print option.

2. Select the printer.

3. Click Show Details or Copies & Pages, and then click the Layout menu.

NOTE: The name of the item varies for dierent software programs.

4. Select a binding option from the Two-Sided drop-down list.

5. Click the Print button.

Manually print on both sides (macOS)

NOTE: This feature is available if you install the HP print driver. It might not be available if you are using AirPrint.

1. Click the File menu, and then click the Print option.

2. Select the printer.

3. Click Show Details or Copies & Pages, and then click the Manual Duplex menu.

NOTE: The name of the item varies for dierent software programs.

4. Click the Manual Duplex box, and select a binding option.

5. Click the Print button.

6. Go to the printer, and remove any blank paper that is in Tray 1.

7. Retrieve the printed stack from the output bin and place it with the printed-side facing down in the input

tray.

8. If prompted, touch the appropriate control panel button to continue.

ENWW Print tasks (macOS) 39

Print multiple pages per sheet (macOS)

1. Click the File menu, and then click the Print option.

2. Select the printer.

3. Click Show Details or Copies & Pages, and then click the Layout menu.

NOTE: The name of the item varies for dierent software programs.

4. From the Pages per Sheet drop-down list, select the number of pages that you want to print on each sheet.

5. In the Layout Direction area, select the order and placement of the pages on the sheet.

6. From the Borders menu, select the type of border to print around each page on the sheet.

7. Click the Print button.

Select the paper type (macOS)

1. Click the File menu, and then click the Print option.

2. Select the printer.

3. Click Show Details or Copies & Pages, and then click the Media & Quality menu or the Paper/Quality menu.

NOTE: The name of the item varies for dierent software programs.

4. Select from the Media & Quality or Paper/Quality options.

NOTE: This list contains the master set of options available. Some options are not available on all printers.

●Media Type: Select the option for the type of paper for the print job.

●Print Quality: Select the resolution level for the print job.

●Edge-To-Edge Printing: Select this option to print close to the paper edges.

5. Click the Print button.

Additional print tasks

Go to www.hp.com/support/ljM282MFP.

Instructions are available for performing specic print tasks, such as the following:

●Create and use printing shortcuts or presets

●Select the paper size, or use a custom paper size

●Select the page orientation

●Create a booklet

●Scale a document to t a specic paper size

●Print the rst or last pages of the document on dierent paper

●Print watermarks on a document

40 Chapter 4 Print ENWW

Mobile printing

Introduction

HP oers multiple mobile and ePrint solutions to enable easy printing to an HP printer from a laptop, tablet,

smartphone, or other mobile device. To see the full list and to determine the best choice, go to www.hp.com/go/

LaserJetMobilePrinting.

NOTE: Update the printer rmware to ensure all mobile printing and ePrint capabilities are supported.

●Wi-Fi Direct (wireless models only)

●HP ePrint via email

●HP ePrint software

●AirPrint

●Android embedded printing

Wi-Fi Direct (wireless models only)

Wi-Fi Direct enables printing from a wireless mobile device without requiring a connection to a network or the

Internet.

Not all mobile operating systems are currently supported by Wi-Fi Direct. If the mobile device does not support

Wi-Fi Direct, you must change the wireless network connection of the device to the Wi-Fi Direct connection of the

printer before printing.

NOTE: For non-Wi-Fi Direct capable mobile devices, the Wi-Fi Direct connection only enables printing. After

using Wi-Fi Direct to print, you must reconnect to a local network in order to access the Internet.

To access to the printer Wi-Fi Direct connection, complete the following steps:

1. From the Home screen on the printer control panel, touch the Connection Information button .

2. Open the following menus:

a. Wi-Fi Direct

b. Settings

c. Connection Method

3. Choose one of the following connection methods:

●Automatic: Choosing this option sets the password to 12345678.

●Manual: Choosing this option generates a secure, randomly generated password.

4. On the mobile device, open the Wi-Fi or the Wi-Fi Direct menu.

5. From the list of available networks, select the printer name.

NOTE: If the printer name does not display, you might be out of range of the Wi-Fi Direct signal. Move the

device closer to the printer.

6. If prompted, enter the Wi-Fi Direct password.

ENWW Mobile printing 41

NOTE: For Android devices that support Wi-Fi Direct, if the connection method is set to Automatic, the

connection will occur automatically, without a password prompt. If the connection method is set to Manual,

you will need to either press the OK button, or provide a personal identication number (PIN) — displayed

on the printer control panel — as a password on the mobile device.

NOTE: To access the Wi-Fi Direct password, from Home screen on the printer control panel, touch the

Connection Information button .

7. Open the document, and then select the Print option.

NOTE: If the mobile device does not support printing, install the HP ePrint mobile app.

8. Select the printer from the list of available printers, and then select Print.

9. After the print job is complete, some mobile devices need to be reconnected to the local network.

●Android 4.0 and later tablets and phones with the HP Print Service or Mopria mobile printing plugin installed

●Most Windows 8.1 computers, tablets, and laptops that have the HP print driver installed

The following devices and computer operating systems do not support Wi-Fi Direct, but can print to a printer that

does:

●Apple iPhone and iPad

●Mac computers running macOS

For more information on Wi-Fi Direct printing, go to www.hp.com/go/wirelessprinting.

Wi-Fi Direct capabilities can be enabled or disabled from the printer control panel.

Enable or disable Wi-Fi Direct

1. From the Home screen on the printer control panel, select the Connection Information button .

2. Open the following menus:

a. Wi-Fi Direct

b. Settings

c. On/O

3. Touch the On menu item. Touching the O button disables Wi-Fi Direct printing.

NOTE: In environments where more than one model of the same printer is installed, it might be helpful to

provide each printer a unique Wi-Fi Direct name for easier printer identication for Wi-Fi Direct printing. The Wi-Fi

Direct Name is also available by touching the Connection Information icon from the Home screen on

the printer control panel, and then touching the Wi-Fi Direct icon.

Change the printer Wi-Fi Direct name

Follow this procedure to change the printer Wi-Fi Direct name using the HP Embedded Web Server (EWS):

42 Chapter 4 Print ENWW

Step one: Open the HP Embedded Web Server

1. From the Home screen on the printer control panel, touch the Connection Information button ,

and then touch the Network Connected button or the Network Wi-Fi ON button to display the IP

address or host name.

2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the

printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

NOTE: If the web browser displays a message indicating that accessing the website might not be safe,

select the option to continue to the website. Accessing this website will not harm the computer.

Step two: Change the Wi-Fi Direct name

1. Click the Networking tab.

2. On the left navigation pane, click the Wi-Fi Direct Setup link.

3. In the Wi-Fi Direct Name eld, enter the new name.

4. Click Apply.

HP ePrint via email

Use HP ePrint to print documents by sending them as an email attachment to the printer's email address from

any email-enabled device.

To use HP ePrint, the printer must meet these requirements:

●The printer must be connected to a wired or wireless network and have Internet access.

●HP Web Services must be enabled on the printer, and the printer must be registered with HP Connected.

Follow this procedure to enable HP Web Services and register with HP Connected:

1. From the Home screen on the printer control panel, touch the Connection Information button

2. Open the following menus:

a. HP ePrint

b. Settings

c. Enable Web Services

3. Touch the Print button to read the terms of use agreement. Touch the OK button to accept the terms

of use and enable HP Web Services

The printer enables Web Services, and then prints an information page. The information page

contains the printer code necessary to register the HP printer at HP Connected.

4. Go to www.hpconnected.com to create an HP ePrint account and complete the setup process.

ENWW Mobile printing 43

HP ePrint software

The HP ePrint software makes it easy to print from a Windows or Mac desktop or laptop computer to any HP

ePrint-capable printer. This software makes it easy to nd HP ePrint-enabled printers that are registered to your

HP Connected account. The target HP printer can be located in the oice or at locations across the globe.

●Windows: After installing the software, open the Print option from within your application, and then select

HP ePrint from the installed printers list. Click the Properties button to congure print options.

●macOS: After installing the software, select File, Print, and then select the arrow next to PDF (in the bottom

left of the driver screen). Select HP ePrint.

For Windows, the HP ePrint software supports TCP/IP printing to local network printers on the network (LAN or

WAN) to products that support UPD PostScript®.

Windows and macOS both support IPP printing to LAN or WAN network-connected products that support ePCL.

Windows and macOS also both support printing PDF documents to public print locations and printing using HP

ePrint via email through the cloud.

Go to www.hp.com/go/eprintsoftware for drivers and information.

NOTE: For Windows, the name of the HP ePrint Software print driver is HP ePrint + JetAdvantage.

NOTE: The HP ePrint software is a PDF workow utility for macOS, and is not technically a print driver.

NOTE: HP ePrint Software does not support USB printing.

AirPrint

Direct printing using Apple’s AirPrint is supported for iOS and from Mac computers running macOS 10.7 Lion and

newer. Use AirPrint to print directly to the printer from an iPad, iPhone (3GS or later), or iPod touch (third

generation or later) in the following mobile applications:

●Mail

●Photos

●Safari

●iBooks

●Select third-party applications

To use AirPrint, the printer must be connected to the same network (sub-net) as the Apple device. For more

information about using AirPrint and about which HP printers are compatible with AirPrint, go to

www.hp.com/go/MobilePrinting.

NOTE: Before using AirPrint with a USB connection, verify the version number. AirPrint versions 1.3 and earlier

do not support USB connections.

44 Chapter 4 Print ENWW

Android embedded printing

HP's built-in print solution for Android and Kindle enables mobile devices to automatically nd and print to HP

printers that are either on a network or within wireless range for Wi-Fi Direct printing.

The print solution is built into the many versions of the operating system.

NOTE: If printing is not available on your device, go to the Google Play > Android apps and install the HP Print

Service Plugin.

For more information on how to use Android embedded printing and which Android devices are supported, go to

www.hp.com/go/LaserJetMobilePrinting.

ENWW Mobile printing 45

Use walk-up USB printing

Introduction

This printer features walk-up USB printing, for quickly printing les without sending them from a computer. The

printer accepts standard USB ash drives in the USB port. It supports the following types of les:

●.pdf

●.jpg

●.prn and .PRN

●.cht and .CHT

●.pxl

●.pcl and .PCL

●.ps and .PS

●.doc and .docx

●.ppt and .pptx

Step one: Access USB les on the printer

1. Insert the USB ash drive into the walk-up USB port on the printer.

2. The USB Flash Drive menu opens with the following options:

●Print Documents

●View and Print Photos

●Scan to USB Drive

Step two: Print USB documents

Option one: Print documents

1. To print a document, select Print Documents.

2. Select the name of the document to print. If the document is stored in a folder, select the folder rst, and

then select the document to print.

3. When the summary screen opens, the following settings can be adjusted:

●Number of Copies

●Paper Size

●Paper Type

●Fit to Page

46 Chapter 4 Print ENWW

●Collation

●Output Color (color models only)

4. Select Print to print the document.

5. Retrieve the printed job from the output bin, and remove the USB ash drive.

Option two: Print photos

1. To print photos, select View and Print Photos.

2. Select the preview image of each photo to be printed, and then select Done.

3. When the summary screen opens, the following settings can be adjusted:

●Image Size

●Paper Size

●Paper Type

●Number of Copies

●Output Color (color printers only)

●Lighter/Darker

4. Select Print to print the photos.

5. Retrieve the printed job from the output bin, and remove the USB ash drive.

ENWW Use walk-up USB printing 47

48 Chapter 4 Print ENWW

5 Copy

●Make a copy

●Copy on both sides (duplex)

For more information:

The following information is correct at the time of publication. For current information, see www.hp.com/

support/ljM282MFP.

HP's all-inclusive help for the printer includes the following information:

●Install and congure

●Learn and use

●Solve problems

●Download software and rmware updates

●Join support forums

●Find warranty and regulatory information

ENWW 49

Make a copy

1. Load the document on the scanner glass according to the indicators on the product.

2. From the Home screen on the product control panel, touch the Copy button .

3. To optimize copy quality for dierent types of documents, touch the Settings button, and then scroll to and

touch the Optimize button. Swipe the control panel screen to scroll through the options, and then touch an

option to select it. The following copy-quality settings are available:

●Auto Select: Use this setting when you are not concerned about the quality of the copy. This is the

default setting.

●Mixed: Use this setting for documents that contain a mixture of text and graphics.

●Text: Use this setting for documents that contain mostly text.

●Picture: Use this setting for documents that contain mostly graphics.

4. Touch Number of Copies, and then use the touchscreen keypad to adjust the number of copies.

5. Touch the Black or Color button to start copying.

50 Chapter 5 Copy ENWW

Copy on both sides (duplex)

●Copy on both sides automatically

●Copy on both sides manually

Copy on both sides automatically

1. Load the original documents into the document feeder with the rst page facing up, and with the top of the

page leading.

2. Adjust the paper guides to t the size of the document.

3. From the Home screen on the product control panel, touch the Copy button .

4. Touch the Settings button.

5. Scroll to and touch the Two-Sided button.

6. Swipe through the options, and then touch an option to select it.

7. Touch the Black or Color button to start copying.

Copy on both sides manually

1. Place the document face-down on the scanner glass with the upper-left corner of the page in the upper-

left corner of the glass. Close the scanner.

2. From the Home screen on the product control panel, touch the Copy button .

3. Touch the Settings button.

4. Scroll to and touch the Two-Sided button.

5. Swipe through the options, and then touch an option to select it.

6. Touch the Black or Color button to start copying.

7. The product prompts you to load the next original document. Place it on the glass, and then touch the OK

button.

8. Repeat this process until you have scanned the last page. Touch the Done button to nish printing the

copies.

ENWW Copy on both sides (duplex) 51

52 Chapter 5 Copy ENWW

6 Scan

●Scan by using the HP Scan software (Windows)

●Scan by using the HP Smart Software (macOS)

●Set up the Scan to E-mail feature

●Set up the Scan to Network Folder feature

●Scan to a USB ash drive

●Scan to email

●Scan to a network folder

●Additional scan tasks

For more information:

The following information is correct at the time of publication. For current information, see www.hp.com/

support/ljM282MFP.

HP's all-inclusive help for the printer includes the following information:

●Install and congure

●Learn and use

●Solve problems

●Download software and rmware updates

●Join support forums

●Find warranty and regulatory information

ENWW 53

Scan by using the HP Scan software (Windows)

Use the HP Scan software to initiate scanning from software on your computer. You can save the scanned image

as a le or send it to another software application.

1. Open the HP Printer Assistant.

●Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.

●Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the printer

name.

●Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then

select the printer name.

●Windows 7: From the computer desktop, click Start, select All Programs, click HP, click the folder for

the printer, and then select the printer name.

2. In the HP Printer Assistant, select Scan, and then select Scan a Document or Photo.

3. Adjust the settings if necessary.

4. Click Scan.

54 Chapter 6 Scan ENWW

Scan by using the HP Smart Software (macOS)

Use the HP Smart software to initiate scanning from software on your computer.

1. Load the document in the document feeder or on the scanner glass according to the indicators on the

printer.

2. From the computer, open HP Smart, which is located in the Applications folder.

3. Follow the on-screen instructions to scan the document.

4. When you have scanned all the pages, click File and then Save to save them to a le.

ENWW Scan by using the HP Smart Software (macOS) 55

Set up the Scan to E-mail feature

●Introduction

●Before you begin

●Method one: Use the Scan to Email Wizard (Windows)

●Method two: Set up the Scan to Email feature via the HP Embedded Web Server

Introduction

The printer has a feature that enables it to scan a document and send it to one or more email addresses. To use

this scan feature, the printer must be connected to a network; however, the feature is not available until it has

been congured. There are two methods for conguring Scan to Email, the Scan to Email Setup Wizard

(Windows), which is installed in the HP program group for the printer as part of the full software installation, and

the Scan to Email Setup through the HP Embedded Web Server (EWS). Use the following information to set up

the Scan to Email feature.

Before you begin

To set up the Scan to Email feature, the printer must have an active network connection to the same network as

the computer that will run the setup process.

Administrators need the following information before beginning the conguration process.

●Administrative access to the printer

●SMTP server (e.g., smtp.mycompany.com)

NOTE: If you do not know the SMTP server name, SMTP port number, or authentication information,

contact the email/Internet service provider or system administrator for the information. SMTP server

names and port names are typically easy to nd by doing an Internet search. For example, use terms like

"gmail smtp server name" or "yahoo smtp server name" to search.

●SMTP port number

●SMTP server authentication requirements for outgoing email messages, including the user name and

password used for authentication, if applicable.

NOTE: Consult your email service provider's documentation for information on digital sending limits for

your email account. Some providers may temporarily lock your account if you exceed your sending limit.

Method one: Use the Scan to Email Wizard (Windows)

Use the Scan to Email Wizard, available from the HP Printer Assistant application (Windows), to set up the Scan

to Email feature. The setup wizards include the options for basic conguration.

NOTE: Some operating systems do not support the Scan to Email Wizard.

1. Open the HP Printer Assistant.

●Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.

●Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the printer

name.

56 Chapter 6 Scan ENWW

●Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then

select the printer name.

●Windows 7: From the computer desktop, click Start, select All Programs, click HP, click the folder for

the printer, and then select the printer name.

2. In the HP Printer Assistant, select Scan, and then select Scan to E-mail Wizard.

NOTE: If the Scan to E-mail Wizard option is not available, use Method two: Set up the Scan to Email

feature via the HP Embedded Web Server on page 58

3. In the Outgoing Email Proles dialog, click the New button. The Scan to Email Setup dialog opens.

4. On the 1. Start page, enter the sender’s email address in the Email Address eld.

5. In the Display Name eld, enter the sender’s name. This is the name that will display on the printer control

panel.

6. To require a PIN to be entered on the printer control panel before the printer can send an email, enter a 4-

digit PIN in the Security PIN eld, and then re-enter the PIN in the Conrm Security PIN eld, and then click

Next.

NOTE: HP recommends creating a PIN to secure the email prole.

NOTE: When a PIN is created, it must be entered on the printer control panel each time the prole is used

to send a scan to email.

7. On the 2. Authenticate page, enter the SMTP Server name and SMTP Port number.

NOTE: In most cases, the default port number does not need to be changed.

NOTE: If you are using a hosted SMTP service such as Gmail, verify the SMTP address, port number, and

SSL settings from the service provider’s website or other sources. Typically, for Gmail, the SMTP address is

smtp.gmail.com, port number 465, and the SSL should be enabled.

Please refer to online sources to conrm these server settings are current and valid at the time of

conguration.

8. If you are using Google™ Gmail for email service, select the Always use secure connection (SSL/TLS) check

box.

9. Select the Maximum Size of Email from the drop-down menu.

NOTE: HP recommends using the default le size of Automatic for the maximum size.

10. If the SMTP server requires authentication to send an email, select the Email Log-in Authentication check

box, enter the User ID and Password, and then click Next.

11. On the 3. Congure page, to automatically copy the sender on email messages sent from the prole, select

Include sender in all email messages sent out successfully from the printer, and then click Next.

12. On the 4. Finish page, review the information and verify all the settings are correct. If there is an error, click

the Back button to correct the error. If the settings are correct, click the Save and Test button to test the

conguration.

ENWW Set up the Scan to E-mail feature 57

13. When the Congratulations message displays, click Finish to complete the conguration.

14. The Outgoing Email Proles dialog now shows the newly added sender email prole. Click Close to exit the

wizard.

Method two: Set up the Scan to Email feature via the HP Embedded Web Server

●Step one: Access the HP Embedded Web Server (EWS)

●Step two: Congure the Scan to E-mail feature

●Step three: Add contacts to the E-mail Address Book

●Step four: Congure the default E-mail Options

Step one: Access the HP Embedded Web Server (EWS)

1. From the Home screen on the printer control panel, touch the Network button or the Wireless button

to display the IP address or host name.

2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the

printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

NOTE: If the web browser displays a message indicating that accessing the website might not be safe,

select the option to continue to the website. Accessing this website will not harm the computer.

Step two: Congure the Scan to E-mail feature

1. In the HP EWS, click the System tab.

2. On the left navigation pane, click the Administration link.

3. In the Enabled Features area, set the Scan to Email option to On.

4. Click the Scan tab.

5. On the left navigation pane, click the Outgoing E-mail Proles link.

6. On the Outgoing E-mail Proles page, click the New button.

7. In the E-mail Address area, complete the following elds:

a. In the Your E-mail Address eld, enter the sender’s email address for the new outgoing email prole.

b. In the Display Name eld, enter the sender’s name. This is the name that will display on the printer

control panel.

8. In the SMTP Server Settings area, complete the following elds:

58 Chapter 6 Scan ENWW

a. In the SMTP Server eld, enter the address of the SMTP server.

b. In the SMTP Port eld, enter the SMTP port number.

NOTE: In most cases, the default port number does not need to be changed.

NOTE: If you are using a hosted SMTP service such as Gmail, verify the SMTP address, port number,

and SSL settings from the service provider’s website or other sources. Typically, for Gmail, the SMTP

address is smtp.gmail.com, port number 465, and the SSL should be enabled.

Please refer to online sources to conrm these server settings are current and valid at the time of

conguration.

c. If you are using Google™ Gmail for email service, select the Always use secure connection (SSL/TLS)

check box.

9. If the SMTP server requires authentication to send an email, complete the following elds in the SMTP

Authentication area:

a. Select the SMTP server requires authentication for outgoing e-mail messages check box.

b. In the SMTP User ID eld, enter the user ID for the SMTP server.

c. In the SMTP Password eld, enter the password for the SMTP server.

10. To require a PIN to be entered on the printer control panel before an email is sent using the email address,

complete the following elds in the Optional PIN area:

a. In the PIN (Optional) eld, enter a four digit PIN.

b. In the Conrm PIN eld, re-enter the four digit PIN.

NOTE: HP recommends creating a PIN to secure the email prole.

NOTE: When a PIN is created, it must be entered on the printer control panel each time the prole is used

to send a scan to email.

11. To congure optional email preferences, complete the following elds in the E-mail Message Preferences

area:

a. From the Maximum Size for E-mail Message Attachments drop-down list, select the maximum size

for email message attachments.

NOTE: HP recommends using the default le size of Automatic for the maximum size.

b. To automatically copy the sender on email messages sent from the prole, select the Auto CC check

box.

12. Review all the information, and then click one of the following options:

●Save and Test: Select this option to save the information and test the connection.

●Save Only: Select this option to save the information without testing the connection.

●Cancel: Select this option to quit the conguration without saving.

ENWW Set up the Scan to E-mail feature 59

Step three: Add contacts to the E-mail Address Book

▲In the left navigation pane, click E-mail Address Book to add email addresses to the address book

accessible from the printer.

To enter an individual email address complete the following task:

a. In the Contact Name eld, enter the name of the new email contact.

b. In the Contact E-mail Address, enter the email address of the new email contact.

c. Click Add/Edit.

To create an email group, complete the following task:

a. Click New Group.

b. In the Enter the group name eld, enter a name for the new group.

c. Click a name in the All Individuals area, and then click the arrow button to move it to the Individuals in

Group area.

NOTE: Select multiple names at one time by pressing Ctrl and then clicking a name.

d. Click Save.

Step four: Congure the default E-mail Options

▲In the left navigation pane, click E-mail options to congure the default email options.

a. In the E-mail Subject and Body Text area, complete the following elds:

i. In the E-mail Subject eld, enter a default subject line for the email messages.

ii. In the Body Text eld, enter a custom default message for the email messages.

iii. Select Show body text to enable the default body text to display in emails.

iv. Select Hide body text to suppress the default body text for an email.

b. In the Scan Settings area, complete the following elds:

i. From the Scan File Type drop-down list, select the default le format for scanned les.

ii. From the Scan Paper Size drop-down list, select the default paper size for scanned les.

iii. From the Scan Resolution drop-down list, select the default resolution for scanned les.

NOTE: Higher resolution images have more dots per inch (dpi), so they show more detail.

Lower resolution images have fewer dots per inch and show less detail, but the le size is

smaller.

iv. From the Output Color drop-down list, select Black & White or Color.

v. In the File Name Prex eld, enter a le name prex (e.g., MyScan).

c. Click Apply.

60 Chapter 6 Scan ENWW

Set up the Scan to Network Folder feature

●Introduction

●Before you begin

●Method one: Use the Scan to Network Folder Wizard (Windows)

●Method two: Set up the Scan to Network Folder feature via the HP Embedded Web Server

Introduction

The printer has a feature that enables it to scan a document and save it to a network folder. To use this scan

feature, the printer must be connected to a network; however, the feature is not available until it has been

congured. There are two methods for conguring Scan to network folder, the Scan to Network Folder Wizard

(Windows), which is installed in the HP program group for the printer as part of the full software installation, and

the Network Folder Setup through the HP Embedded Web Server (EWS). Use the following information to set up

the Scan to Network Folder feature.

Before you begin

To set up the Scan to Network Folder feature, the printer must have an active network connection to the same

network as the computer that will run the setup process.

Administrators need the following information before beginning the conguration process.

●Administrative access to the printer

●The network path of the destination folder (e.g., \\servername.us.companyname.net\scans)

NOTE: The network folder must be set up as a shared folder for the Scan to Network Folder feature to

work.

Method one: Use the Scan to Network Folder Wizard (Windows)

Use the Scan to Network Folder Wizard, available from the HP Printer Assistant application (Windows), to set up

the Scan to Network Folder feature.

NOTE: Some operating systems do not support the Scan to Network Folder Wizard.

1. Open the HP Printer Assistant.

●Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.

●Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the printer

name.

●Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then

select the printer name.

●Windows 7: From the computer desktop, click Start, select All Programs, click HP, click the folder for

the printer, and then select the printer name.

2. In the HP Printer Assistant, select Scan, and then select Scan to Network Folder Wizard.

NOTE: If the Scan to Network Folder Wizard option is not available, use Method two: Set up the Scan to

Network Folder feature via the HP Embedded Web Server on page 63

ENWW Set up the Scan to Network Folder feature 61

3. In the Network Folder Proles dialog, click the New button. The Scan to Network Folder Setup dialog opens.

4. On the 1. Start page, enter the folder name in the Display Name eld. This is the name that will display on

the printer control panel.

5. Complete the Destination Folder eld in one of the following ways:

a. Enter the le path manually.

b. Click the Browse button and navigate to the folder location.

c. Complete the following task to create a shared folder:

i. Click Share Path.

ii. In the Manage Network Shares dialog, click New.

iii. In the Share Name eld, enter the name to display for the shared folder.

iv. To complete the Folder Path eld, click the Browse button, and then select one of the following

options. Click OK when done.

●Navigate to an existing folder on the computer.

●Click Make New Folder to create a new folder.

v. If the shared path needs a description, enter a description in the Description eld.

vi. In the Share Type eld, select one of the following options, and then click Apply.

●Public

●Private

NOTE: For security considerations, HP recommends selecting Private as the share type.

vii. When a The share was successfully created message displays, click OK.

viii. Select the check box for the destination folder, and then click OK.

6. To create a shortcut to the network folder on the computer desktop, select the Create a Desktop shortcut to

the network folder check box

7. To require a PIN to be entered on the printer control panel before the printer can send a scanned document

to a network folder, enter a 4-digit PIN in the Security PIN eld, and then re-enter the PIN in the Conrm

Security PIN eld. Click Next.

NOTE: HP recommends creating a PIN to secure the destination folder.

NOTE: When a PIN is created, it must be entered on the printer control panel each time a scan is sent to

the network folder.

8. On the 2. Authenticate page, enter the Windows User Name and Windows Password used to log in to the

computer, and then click Next.

9. On the 3. Congure page, select the default scan settings by completing the following task, and then click

Next.

62 Chapter 6 Scan ENWW

a. From the Document Type drop-down list, select the default le format for scanned les.

b. From the Color Preference drop-down list, select Black & White or Color.

c. From the Paper Size drop-down list, select the default paper size for scanned les.

d. From the Quality Settings drop-down list, select the default resolution for scanned les.

NOTE: Higher resolution images have more dots per inch (dpi), so they show more detail. Lower

resolution images have fewer dots per inch and show less detail, but the le size is smaller.

e. In the Filename Prex eld, enter a le name prex (e.g., MyScan).

10. On the 4. Finish page, review the information and verify all the settings are correct. If there is an error, click

the Back button to correct the error. If the settings are correct, click the Save and Test button to test the

conguration.

11. When the Congratulations message displays, click Finish to complete the conguration.

12. The Network Folder Proles dialog now shows the newly added sender email prole. Click Close to exit the

wizard.

Method two: Set up the Scan to Network Folder feature via the HP Embedded Web

Server

●Step one: Access the HP Embedded Web Server (EWS)

●Step two: Congure the Scan to Network Folder feature

Step one: Access the HP Embedded Web Server (EWS)

1. From the Home screen on the printer control panel, touch the Network button or the Wireless button

to display the IP address or host name.

2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the

printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

NOTE: If the web browser displays a message indicating that accessing the website might not be safe,

select the option to continue to the website. Accessing this website will not harm the computer.

Step two: Congure the Scan to Network Folder feature

1. In the HP EWS, click the System tab.

2. On the left navigation pane, click the Administration link.

3. In the Enabled Features area, set the Scan to Network Folder option to On.

4. Click the Scan tab.

5. On the left navigation pane, make sure that the Network Folder Setup link is highlighted. The Scan to

Network Folder page should be displayed.

6. On the Network Folder Conguration page, click the New button.

ENWW Set up the Scan to Network Folder feature 63

7. In the Network Folder Information area, complete the following elds:

a. In the Display Name eld, enter the name to display for the folder.

b. In the Network Path eld, enter the network path to the folder.

c. In the Username eld, enter the user name needed to access the folder on the network.

d. In the Password eld, enter the password needed to access the folder on the network.

8. To require a PIN to be entered on the printer control panel before the printer can send a le to a network

folder, complete the following elds in the Secure the Folder Access with a PIN area:

a. In the PIN (Optional) eld, enter a four digit PIN.

b. In the Conrm PIN eld, re-enter the four digit PIN.

NOTE: HP recommends creating a PIN to secure the destination folder.

NOTE: When a PIN is created, it must be entered on the printer control panel each time a scan is sent to

the network folder.

9. In the Scan Settings area, complete the following elds:

a. From the Scan File Type drop-down list, select the default le format scanned les.

b. From the Scan Paper Size drop-down list, select the default paper size for scanned les.

c. From the Scan Resolution drop-down list, select the default scan resolution for scanned les.

NOTE: Higher resolution images have more dots per inch (dpi), so they show more detail. Lower

resolution images have fewer dots per inch and show less detail, but the le size is smaller.

d. In the Output Color drop-down list, select whether scanned les will be in black and white or in color.

e. In the File Name Prex eld, enter a le name prex (e.g., MyScan).

10. Review all the information, and then click one of the following options:

●Save and Test: Select this option to save the information and test the connection.

●Save Only: Select this option to save the information without testing the connection.

●Cancel: Select this option to quit the conguration without saving.

64 Chapter 6 Scan ENWW

Scan to a USB ash drive

1. Load the document on the scanner glass or into the document feeder according to the indicators on the

printer.

2. Insert a USB ash drive into the walk-up USB port.

3. The USB Flash Drive menu opens with the following options:

●Print Documents

●View and Print Photos

●Scan to USB Drive

4. Select Scan to USB Drive.

5. When the summary screen opens, the following settings can be adjusted:

●Scan File Type

●Scan Resolution

●Scan Paper Size

●Scan Source

●File Name Prex

●Output Color

6. Touch the Scan button to scan and save the le.

The printer creates a folder named HPSCANS on the USB drive, and it saves the le in .PDF or .JPG format

using an automatically generated le name.

ENWW Scan to a USB ash drive 65

Scan to email

Use the printer control panel to scan a le directly to an email address. The scanned le is sent to the address as

an email message attachment.

NOTE: In order to use this feature, the printer must be connected to a network and the Scan to Email feature

must be congured by using the Scan to Email Setup Wizard (Windows) or the HP Embedded Web Server.

1. Load the document on the scanner glass according to the indicators on the printer.

2. From the Home screen on the printer control panel, touch the Scan icon .

3. Touch Scan to E-mail.

4. Select the From address that you want to use. This is also known as an “outgoing email prole.”

NOTE: If the printer is congured with only one outgoing email prole, then this option will not be

available.

NOTE: If the PIN feature has been set up, enter the PIN and touch the OK button. However, a PIN is not

required to use this feature.

5. Touch the To button and pick the address or group to which you want to send the le. Touch the Done

button when nished.

●To send the message to a dierent address, touch the New again and enter the email address.

6. Touch the Subject button if you would like to add a subject line.

7. The control panel screen displays the scan settings.

●To view the scan settings, touch Settings.

●To change a scan setting, touch Edit and then change the setting.

8. Touch the Scan button to start the scan job.

66 Chapter 6 Scan ENWW

Scan to a network folder

Use the printer control panel to scan a document and save it to a folder on the network.

NOTE: In order to use this feature, the printer must be connected to a network and the Scan to Network Folder

feature must be congured by using the Scan to Network Folder Setup Wizard (Windows) or the HP Embedded

Web Server.

1. Load the document on the scanner glass according to the indicators on the printer.

2. From the Home screen on the printer control panel, touch the Scan icon .

3. Touch the Scan to Network Folder item.

4. In the list of network folders, select the folder to which you want to save the document.

5. The control panel screen displays the scan settings.

●If you want to change any of the settings, touch the Settings button, and then change the settings.

●If the settings are correct, go to the next step.

6. Touch the Scan button to start the scan job.

ENWW Scan to a network folder 67

Additional scan tasks

Go to www.hp.com/support/ljM282MFP.

Instructions are available for performing specic scan tasks, such as the following:

●How to scan a general photo or document

●How to scan as editable text (OCR)

●How to scan multiple pages into a single le

68 Chapter 6 Scan ENWW

7 Fax

●Set up to send and receive faxes

●Send a fax

For more information:

The following information is correct at the time of publication. For current information, see www.hp.com/

support/ljM282MFP.

HP's all-inclusive help for the printer includes the following information:

●Install and congure

●Learn and use

●Solve problems

●Download software and rmware updates

●Join support forums

●Find warranty and regulatory information

ENWW 69

Set up to send and receive faxes

●Before starting

●Step 1: Identify the phone connection type

●Step 2: Set up the fax

●Step 3: Congure the fax time, date, and header

●Step 4: Run a fax test

Before starting

Make sure that the printer was fully set up before connecting the fax service.

NOTE: Use the telephone cable and any adapters that shipped with the printer to connect the printer to the

telephone jack.

NOTE: In countries/regions that use serial telephone systems, an adapter is shipped with the printer. Use the

adapter to connect other telecom devices to the same telephone jack the printer is connected to.

Complete the instructions in each of the following four steps:

Step 1: Identify the phone connection type on page 70.

Step 2: Set up the fax on page 71.

Step 3: Congure the fax time, date, and header on page 74.

Step 4: Run a fax test on page 76.

Step 1: Identify the phone connection type

Review the following equipment and service types to determine which setup method to use. The method used

depends on the equipment and services already installed on the phone system.

NOTE: The printer is an analog device. HP recommends using the printer on a dedicated analog telephone line.

●Dedicated phone line: The printer is the only piece of equipment or service connected to the phone line

●Voice calls: Voice and fax calls use the same phone line

●Answering machine: An answering machine answers voice calls on the same phone line used for fax calls

●Voice mail: A voice-mail subscription service uses the same phone line as the fax

●Distinctive ring service: A service from the telephone company that allows several phone numbers to be

associated with one phone line, and each number has a dierent ring pattern; the printer detects the ring

pattern assigned to it and answers the call

●Computer dial-up modem: A computer uses the phone line to connect to the Internet through a dial-up

connection

●DSL line: A digital subscriber line (DSL) service from the telephone company; this service might be called

ADSL in some countries/regions

70 Chapter 7 Fax ENWW

●PBX or ISDN phone system: A private branch exchange (PBX) phone system or an integrated services digital

network (ISDN) system

●VoIP phone system: Voice over Internet protocol (VoIP) through an Internet provider

Step 2: Set up the fax

Click the link below that best describes the environment in which the printer will be sending and receiving faxes,

and follow the setup instructions.

●Dedicated phone line on page 71

●Shared voice/fax line on page 72

●Shared voice/fax line with an answering machine on page 73

Instructions for only three of the connection types are included here. For more information about connecting the

printer with other connection types, go to the support website www.hp.com/support/ljM282MFP.

NOTE: This printer is an analog fax device. HP recommends using the printer on a dedicated analog telephone

line. For a digital environment, such as DSL, PBX, ISDN, or VoIP, make sure to use the correct lters and congure

the digital settings correctly. For more information, contact the digital service provider.

NOTE: Do not connect more than three devices to the telephone line.

NOTE: Voice mail is not supported with this printer.

Dedicated phone line

Follow these steps to set up the printer on a dedicated phone line with no additional services.

1. Connect the telephone cable to the fax port on the printer and to the telephone jack on the wall.

NOTE: Some countries/regions might require an adapter for the telephone cable that came with the

printer.

NOTE: On some printers, the fax port might be above the phone port. Refer to the icons on the printer.

2. Set the printer to answer fax calls automatically.

a. Turn the printer on.

b. From the control panel, open the Setup menu.

ENWW Set up to send and receive faxes 71

c. Select the Fax Setup menu.

d. Select the Basic Setup menu.

e. Select the Answer Mode setting.

f. Select the Automatic option.

3. Continue to Step 3: Congure the fax time, date, and header on page 74.

Shared voice/fax line

Follow these steps to set up the printer on a shared voice/fax line.

1. Disconnect any devices that are connected to the telephone jack.

2. Connect the telephone cable to the fax port on the printer and to the telephone jack on the wall.

NOTE: Some countries/regions might require an adapter to the telephone cable that came with the

printer.

NOTE: On some printers, the fax port might be above the phone port. Refer to the icons on the printer.

3. Remove the plug from the telephone line out port on the rear of the printer, and then connect a phone to

this port.

4. Set the printer to answer fax calls automatically.

a. Turn the printer on.

b. From the control panel, open the Setup menu.

c. Select the Fax Setup menu.

d. Select the Basic Setup menu.

e. Select the Answer Mode setting, and then select the Automatic option.

5. Set the printer to check for a dial tone before sending a fax.

NOTE: This prevents the printer from sending a fax while someone is on the telephone.

a. From the control panel, open the Setup menu.

b. Select the Fax Setup menu.

72 Chapter 7 Fax ENWW

c. Select the Advanced Setup menu.

d. Select the Detect Dial Tone setting, and then select On.

6. Continue to Step 3: Congure the fax time, date, and header on page 74.

Shared voice/fax line with an answering machine

Follow these steps to set up the printer on a shared voice/fax line with an answering machine.

1. Disconnect any devices that are connected to the telephone jack.

2. Connect the telephone cable to the fax port on the printer and to the telephone jack on the wall.

NOTE: Some countries/regions might require an adapter for the telephone cable that came with the

printer.

NOTE: On some printers, the fax port might be above the phone port. Refer to the icons on the printer.

3. Remove the plug from the telephone line out port on the rear of the printer.

4. Connect the answering machine telephone cable to the telephone line out port on the rear of the printer.

NOTE: Connect the answering machine directly to the printer, or the answering machine might record fax

tones from a sending fax machine and the printer might not receive faxes.

NOTE: If the answering machine does not have a built-in telephone, connect a telephone to the OUT port

on the answering machine for convenience.

NOTE: On some printers, the fax port might be above the phone port. Refer to the icons on the printer.

ENWW Set up to send and receive faxes 73

5. Congure the rings to answer setting on the printer.

a. Turn the printer on.

b. From the control panel, open the Setup menu.

c. Select the Fax Setup menu.

d. Select the Basic Setup menu.

e. Select the Rings to Answer option.

f. Use the numeric keypad on the printer control panel to set the number of rings, and then select OK.

6. Set the printer to answer fax calls automatically.

a. From the control panel, open the Setup menu.

b. Select the Fax Setup menu.

c. Select the Basic Setup menu.

d. Select the Answer Mode setting, and then select the Automatic option.

7. Set the printer to check for a dial tone before sending a fax.

NOTE: This prevents the printer from sending a fax while someone is on the telephone.

a. From the control panel, open the Setup menu.

b. Select the Fax Setup menu.

c. Select the Advanced Setup menu.

d. Select the Detect Dial Tone setting, and then select the On button.

8. Continue to Step 3: Congure the fax time, date, and header on page 74.

Step 3: Congure the fax time, date, and header

Congure the printer fax settings using one of the following methods:

●HP Fax Setup Wizard on page 74 (recommended method)

●Printer control panel on page 75

●HP Embedded Web Server (EWS) and HP Device Toolbox (Windows) on page 75 (if the software is

installed)

NOTE: In the United States and many other countries/regions, setting the time, date, and other fax header

information is a legal requirement.

HP Fax Setup Wizard

Access the Fax Setup Wizard after initial setup and software installation by following these steps.

NOTE: Some operating systems do not support the Fax Setup Wizard.

1. Open the HP Printer Assistant.

74 Chapter 7 Fax ENWW

●Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.

●Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the printer

name.

●Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then

select the printer name.

●Windows 7, Windows Vista, and Windows XP:: From the computer desktop, click Start, select All

Programs, click HP, click the folder for the printer, and then select the printer name.

2. In the HP Printer Assistant, select Fax, and then select Fax Setup Wizard.

3. Follow the on-screen instructions in the HP Fax Setup Wizard to congure the fax settings.

4. Continue to Step 4: Run a fax test on page 76.

Printer control panel

To use the control panel to set the date, time, and header, complete the following steps.

1. From the control panel, open the Setup menu.

2. Select the Fax Setup menu.

3. Select the Basic Setup menu.

4. Select the Time/Date option.

5. Select 12-hour clock or 24-hour clock.

6. Use the keypad to enter the current time, and then select OK.

7. Select the date format.

8. Use the keypad to enter the current date, and then select OK.

9. Select the Fax Header menu.

10. Use the keypad to enter the fax number, and then select OK.

NOTE: The maximum number of characters for the fax number is 20.

11. Use the keypad to enter the company name or header, and then select OK.

NOTE: The maximum number of characters for the fax header is 25.

12. Continue to Step 4: Run a fax test on page 76.

HP Embedded Web Server (EWS) and HP Device Toolbox (Windows)

1. Start the HP EWS either from the software or a web browser.

Method one: Open the HP Embedded Web Server (EWS) from the software

a. Open the HP Printer Assistant.

ENWW Set up to send and receive faxes 75

●Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.

●Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the

printer name.

●Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then

select the printer name.

●Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All

Programs, click HP, click the folder for the printer, and then select the printer name.

b. In the HP Printer Assistant, select Print, and then select HP Device Toolbox.

Method two: Open the HP Embedded Web Server (EWS) from a web browser

a. On the printer control panel, press the Setup button . Open the Network Setup menu, select Show

IP Address, and then select Yes. Return to the Home screen to view the IP address.

b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays

on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

NOTE: If the web browser displays a message indicating that accessing the website might not be

safe, select the option to continue to the website. Accessing this website will not harm the computer.

2. Click the Fax tab.

3. Follow the on-screen instructions to congure the fax settings.

4. Continue to Step 4: Run a fax test on page 76.

Step 4: Run a fax test

Run a fax test to make sure that the fax is set up correctly.

1. From the control panel, open the Setup menu.

2. Select the Self Diagnostics menu.

3. Select the Run Fax Test option. The printer prints a test report.

4. Review the report.

●If the report indicates the printer passed the test, the printer is ready to send and receive faxes.

●If the report indicates the printer failed the test, review the report for more information about xing

the problem. The fax troubleshooting checklist has more information on resolving fax problems.

76 Chapter 7 Fax ENWW

Send a fax

●Fax from the atbed scanner

●Fax from the document feeder

●Use speed dials and group-dial entries

●Send a fax from the software

●Send a fax from a third-party software program, such as Microsoft Word

Fax from the atbed scanner

1. Place the document face-down on the scanner

glass.

2. From the Home screen on the printer control

panel, touch the Fax icon .

3. Use the keypad to enter the fax number.

4. Touch the Start Fax button.

5. The printer prompts you to conrm that you are

sending from the scanner glass. Touch the Yes

button.

6. The printer prompts you to load the rst page.

Touch the OK button.

7. The printer scans the rst page and then prompts

you to load another page. If the document has

multiple pages, touch the Yes button. Continue this

process until you have scanned all the pages.

8. When you have scanned the last page, touch the

No button at the prompt. The printer sends the fax.

ENWW Send a fax 77

Fax from the document feeder

1. Insert the originals into the document feeder face-

up.

CAUTION: To prevent damage to the printer, do

not use an original that contains correction tape,

correction uid, paper clips, or staples. Also, do not

load photographs, small originals, or fragile

originals into the document feeder.

123

2. Adjust the paper guides until they are snug against

the paper.

123

3. From the Home screen on the printer control

panel, touch the Fax icon .

4. Use the keypad to enter the fax number.

5. Touch the Start Fax button.

Use speed dials and group-dial entries

NOTE: Phone book entries must be set up using the Fax Menu prior to using the phone book to send faxes.

1. Load the document onto the scanner glass or into

the document feeder.

123

78 Chapter 7 Fax ENWW

2. From the Home screen on the printer control

panel, touch the Fax icon .

3. On the keypad, touch the fax phone book icon.

4. Touch the name of the individual or group entry

that you want to use.

5. Touch the Start Fax button.

Send a fax from the software

The procedure to send a fax varies according to your specications. The most typical steps follow.

1. Open the HP Printer Assistant.

●Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.

●Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the printer

name.

●Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then

select the printer name.

●Windows 7: From the computer desktop, click Start, select All Programs, click HP, click the folder for

the printer, and then select the printer name..

2. In the HP Printer Assistant, select Fax, and then select Send Fax.

3. Enter the fax number of one or more recipients.

4. Load the document in the document feeder.

5. Click Send Now.

Send a fax from a third-party software program, such as Microsoft Word

1. Open a document in a third-party program.

2. Click the File menu, and then click Print.

3. Select the fax print driver from the print driver drop-down list. The fax software opens.

4. Enter the fax number of one or more recipients.

5. Include any pages loaded at the printer. This step is optional.

6. Click Send Now.

ENWW Send a fax 79

80 Chapter 7 Fax ENWW

8 Manage the printer

●Use HP Web Services applications (touchscreen models only)

●Change the printer connection type (Windows)

●Advanced conguration with HP Embedded Web Server (EWS) and HP Device Toolbox (Windows)

●Congure IP network settings

●Printer security features

●Energy-conservation settings

●HP Web Jetadmin

●Update the rmware

For more information:

The following information is correct at the time of publication. For current information, see www.hp.com/

support/ljM282MFP.

HP's all-inclusive help for the printer includes the following information:

●Install and congure

●Learn and use

●Solve problems

●Download software and rmware updates

●Join support forums

●Find warranty and regulatory information

ENWW 81

Use HP Web Services applications (touchscreen models only)

HP Web Services applications provide useful content that can be automatically downloaded from the Internet to

the printer. Choose from a variety of applications including news, calendars, forms, and cloud-based document

storage.

To activate these applications and schedule the downloads, go to the HP Connected website at

www.hpconnected.com

NOTE: To use this feature, the printer must be connected to a wired or wireless network and have internet

access. HP Web Services must be enabled on the printer.

Enable Web Services

This process enables both HP Web Services and the Apps button

1. From the Home screen on the printer control panel, swipe until the Setup menu displays. Touch the Setup

icon to open the menu.

2. Touch HP Web Services.

3. Touch Enable Web Services.

4. To print the HP Web Services Terms of Use, touch Print.

5. Touch OK to complete the procedure.

After you download an application from the HP Connected website, it is available in the Apps menu on the

printer control panel.

82 Chapter 8 Manage the printer ENWW

Change the printer connection type (Windows)

If you are already using the printer and you wish to change the way it is connected, use Device Setup & Software

to change the connection. For example, connect the new printer to the computer using a USB or network

connection, or change the connection from a USB to a wireless connection.

To open Device Setup & Software, complete the following procedure:

1. Open the HP Printer Assistant.

●Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.

●Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the printer

name.

●Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then

select the printer name.

●Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All

Programs, click HP, click the folder for the printer, and then select the printer name.

2. In the HP Printer Assistant, select Tools from the navigation bar, and then select Device Setup & Software.

ENWW Change the printer connection type (Windows) 83

Advanced conguration with HP Embedded Web Server (EWS) and

HP Device Toolbox (Windows)

Use the HP Embedded Web Server to manage printing functions from your computer instead of the printer

control panel.

●View printer status information

●Determine the remaining life for all supplies and order new ones

●View and change tray congurations (paper types and sizes)

●View and print internal pages

●View and change network conguration

The HP Embedded Web Server works when the printer is connected to an IP-based network. The HP Embedded

Web Server does not support IPX-based printer connections. You do not have to have Internet access to open

and use the HP Embedded Web Server.

When the printer is connected to the network, the HP Embedded Web Server is automatically available.

NOTE: HP Device Toolbox is software used to connect to the HP Embedded Web Server when the printer is

connected to a computer via USB. It is available only if a full installation was performed when the printer was

installed on a computer. Depending on how the printer is connected, some features might not be available.

NOTE: The HP Embedded Web Server is not accessible beyond the network rewall.

Method one: Open the HP Embedded Web Server (EWS) from the software

1. Open the HP Printer Assistant.

●Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.

●Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the printer

name.

●Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then

select the printer name.

●Windows 7: From the computer desktop, click Start, select All Programs, click HP, click the folder for

the printer, and then select the printer name.

2. In the HP Printer Assistant, select Print, and then select HP Device Toolbox.

Method two: Open the HP Embedded Web Server (EWS) from a web browser

1. From the Home screen on the printer control panel, touch the Connection Information button ,

and then touch the Network Connected button or the Network Wi-Fi ON button to display the IP

address or host name.

84 Chapter 8 Manage the printer ENWW

2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the

printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

NOTE: If the web browser displays a message indicating that accessing the website might not be safe,

select the option to continue to the website. Accessing this website will not harm the computer.

Table 8-1 EWS tabs

Tab or section Description

Home tab

Provides printer, status, and

conguration information.

●Device Status: Shows the printer status and shows the approximate percent life remaining

of HP supplies.

●Supplies Status: Shows the approximate percent life remaining of HP supplies. Actual supply

life remaining can vary. Consider having a replacement supply available to install when print

quality is no longer acceptable. The supply does not need to be replaced unless the print

quality is no longer acceptable.

●Device Conguration: Shows the information found on the printer conguration page.

●Network Summary: Shows the information found on the printer network conguration

page.

●Reports: Print the conguration and supplies status pages that the printer generates.

●Color Usage Log: Shows a summary of color jobs that the printer has produced.

(Color models only)

●Event Log: Shows a list of all printer events and errors.

●Open Source Licenses: Shows a summary of the licenses for open source software

programs that can be used with the printer.

System tab

Provides the ability to congure the

printer from your computer.

●Device Information: Provides basic printer and company information.

●Paper Setup: Change the default paper-handling settings for the printer.

●Print Quality: Change the default print-quality settings for the printer.

●Energy Settings: Change the default times for entering Sleep/Auto O mode or automatic

shut down.

●Print Density: Change the print density of contrasts, highlights, midtones, and shadows.

●Paper Types: Congure print modes that correspond to the paper types that the printer

accepts.

●System Setup: Change the system defaults for the printer.

●Supply Settings: Change the settings for Cartridge is low alerts and other supplies

information.

●Service: Perform the cleaning procedure on the printer.

●Save and Restore: Save the current settings for the printer to a le on the computer. Use

this le to load the same settings onto another printer or to restore these settings to this

printer at a later time.

●Administration: Set or change the printer password. Enable or disable printer features.

NOTE: The System tab can be password-protected. If this printer is on a network, always

consult with the administrator before changing settings on this tab.

ENWW Advanced conguration with HP Embedded Web Server (EWS) and HP Device Toolbox (Windows) 85

Table 8-1 EWS tabs (continued)

Tab or section Description

Print tab

Provides the ability to change default

print settings from your computer.

●Printing: Change the default printer print settings, such as number of copies and paper

orientation. These are the same options that are available on the control panel.

●PCL5: View and change the PCL5 settings.

●PostScript: Turn o or on the Print PS Errors feature.

Fax tab

(Fax models only)

●Receive Options: Congure how the printer handles incoming faxes.

●Phone Book: Add or delete entries in the fax phone book.

●Junk Fax List: Set fax numbers to block from sending faxes to the printer.

●Fax Activity Log: Review recent fax activity for the printer.

Scan tab

(MFP models only)

Congure the Scan to Network Folder and Scan to E-mail features.

●Network Folder Setup: Congure folders on the network to which the printer can save a

scanned le.

●Scan to E-mail Setup: Begin the process to set up the Scan to E-mail feature.

●Outgoing E-mail Proles: Set an email address that will appear as the “from” address for all

emails sent from the printer. Congure the SMTP Server information.

●E-mail Address Book: Add or delete entries in the email address book.

●E-mail Options: Congure a default subject line and body text. Congure default scan

settings for emails.

Copy tab

(MFP models only)

Congure the default copy settings.

Networking tab

(Network-connected printers only)

Provides the ability to change network

settings from your computer.

Network administrators can use this tab to control network-related settings for the printer when

it is connected to an IP-based network. It also allows the network administrator to set up Wireless

Direct functionality. This tab does not appear if the printer is directly connected to a computer.

HP Web Services tab Use this tab to set up and use various web tools with the printer.

86 Chapter 8 Manage the printer ENWW

Congure IP network settings

●Introduction

●Printer sharing disclaimer

●View or change network settings

●Rename the printer on a network

●Manually congure IPv4 TCP/IP parameters from the control panel

Introduction

Use the following sections to congure the printer network settings.

Printer sharing disclaimer

HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems and

not of the HP printer drivers. Go to Microsoft at www.microsoft.com.

View or change network settings

Use the HP Embedded Web Server to view or change IP conguration settings.

1. Open the HP Embedded Web Server (EWS):

a. From the Home screen on the printer control panel, touch the Connection Information button

, and then touch the Network Connected button or the Network Wi-Fi ON button

to display the IP address or host name.

b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays

on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

NOTE: If the web browser displays a message indicating that accessing the website might not be

safe, select the option to continue to the website. Accessing this website will not harm the computer.

2. Click the Networking tab to obtain network information. Change settings as needed.

Rename the printer on a network

To rename the printer on a network so that it can be uniquely identied, use the HP Embedded Web Server.

1. Open the HP Embedded Web Server (EWS):

a. From the Home screen on the printer control panel, touch the Connection Information button

, and then touch the Network Connected button or the Network Wi-Fi ON button

to display the IP address or host name.

ENWW Congure IP network settings 87

b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays

on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

NOTE: If the web browser displays a message indicating that accessing the website might not be

safe, select the option to continue to the website. Accessing this website will not harm the computer.

2. Open the System tab.

3. On the Device Information page, the default printer name is in the Device Description eld. You can change

this name to uniquely identify this printer.

NOTE: Completing the other elds on this page is optional.

4. Click the Apply button to save the changes.

Manually congure IPv4 TCP/IP parameters from the control panel

Use the control-panel menus to manually set an IPv4 address, subnet mask, and default gateway.

1. From the Home screen on the printer control panel, touch the Setup button .

2. Scroll to and touch the Network Setup menu.

3. Touch the IPv4 Cong Method menu, and then touch the Manual button.

4. Use the keypad on the touchscreen to enter the IP address, and touch the OK button. Touch the Yes button

to conrm.

5. Use the keypad on the touchscreen to enter the subnet mask, and touch the OK button. Touch the Yes

button to conrm.

6. Use the keypad on the touchscreen to enter the default gateway, and touch the OK button. Touch the Yes

button to conrm.

88 Chapter 8 Manage the printer ENWW

Printer security features

Introduction

The printer includes several security features to restrict who has access to conguration settings, to secure data,

and to prevent access to valuable hardware components.

●Assign or change the system password using the Embedded Web Server

Assign or change the system password using the Embedded Web Server

Assign an administrator password for access to the printer and the HP Embedded Web Server so that

unauthorized users cannot change the printer settings.

1. Open the HP Embedded Web Server (EWS):

a. From the Home screen on the printer control panel, touch the Connection Information button

, and then touch the Network Connected button or the Network Wi-Fi ON button

to display the IP address or host name.

b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays

on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

NOTE: If the web browser displays a message indicating that accessing the website might not be

safe, select the option to continue to the website. Accessing this website will not harm the computer.

2. On the System tab, click the Administration link in the left navigation pane.

3. In the area labeled Product Security, enter the password in the Password eld.

4. Re-enter the password in the Conrm Password eld.

5. Click the Apply button.

NOTE: Make note of the password and store it in a safe place.

6. Click the Apply button.

NOTE: Make note of the password and store it in a safe place.

ENWW Printer security features 89

Energy-conservation settings

●Introduction

●Print with EconoMode

●Set the Sleep/Auto O After Inactivity setting

●Set the Shut Down After Inactivity delay and congure the printer to use 1 watt or less of power

●Set the Delay Shut Down setting

Introduction

The printer includes several economy features to conserve energy and supplies.

Print with EconoMode

This printer has an EconoMode option for printing drafts of documents. Using EconoMode can use less toner.

However, using EconoMode can also reduce print quality.

HP does not recommend the full-time use of EconoMode. If EconoMode is used full-time, the toner supply might

outlast the mechanical parts in the toner cartridge. If print quality begins to degrade and is no longer acceptable,

consider replacing the toner cartridge.

NOTE: If this option is not available in your print driver, you can set it using the HP Embedded Web Server.

1. From the software program, select the Print option.

2. Select the printer, and then click the Properties or Preferences button.

3. Click the Paper/Quality tab.

4. Click the EconoMode check box.

Set the Sleep/Auto O After Inactivity setting

Use the control panel menus to set the amount of idle time before the printer enters sleep mode.

Complete the following procedure to change the Sleep/Auto O After setting:

1. From the Home screen on the printer control panel, swipe until the Setup menu displays. Touch the Setup

icon to open the menu.

2. Open the following menus:

a. System Setup

b. Energy Settings

c. Sleep/Auto O After

3. Select the time for the Sleep/Auto O After delay.

Set the Shut Down After Inactivity delay and congure the printer to use 1 watt or less of

power

Use the control panel menus to set the amount of time before the printer shuts down.

90 Chapter 8 Manage the printer ENWW

NOTE: After the printer shuts down, the power consumption is 1 watt or less.

Complete the following procedure to change the Shut Down After Delay setting:

1. From the Home screen on the printer control panel, swipe until the Setup menu displays. Touch the Setup

icon to open the menu.

2. Open the following menus:

a. System Setup

b. Energy Settings

c. Shut Down After

3. Select the time for the Shut Down After delay.

NOTE: The default value is 4 hours.

Set the Delay Shut Down setting

Use the control panel menus to select whether or not the printer delays shutting down after the power button is

pressed.

Complete the following procedure to change the Delay Shut Down setting:

1. From the Home screen on the printer control panel, swipe until the Setup menu displays. Touch the Setup

icon to open the menu.

2. Open the following menus:

a. System Setup

b. Energy Settings

c. Delay Shut Down

3. Select one of the delay options:

●No Delay: The printer shuts down after a period of inactivity determined by the Shut Down After

setting.

●When Ports Are Active: When this option is selected the printer will not shut down unless all ports are

inactive. An active network link or fax connection will prevent the printer from shutting down.

ENWW Energy-conservation settings 91

HP Web Jetadmin

HP Web Jetadmin is an award-winning, industry-leading tool for eiciently managing a wide variety of networked

HP products, including printers, multifunction printers, and digital senders. This single solution allows you to

remotely install, monitor, maintain, troubleshoot, and secure your printing and imaging environment —

ultimately increasing business productivity by helping you save time, control costs, and protect your investment.

HP Web Jetadmin upgrades are periodically made available to provide support for specic product features. Go to

www.hp.com/go/webjetadmin for more information.

92 Chapter 8 Manage the printer ENWW

Update the rmware

HP oers periodic printer updates, new Web Services apps, and new features to existing Web Services apps.

Follow these steps to update the printer rmware for a single printer. When you update the rmware, Web

Service apps will update automatically.

There are two supported methods to perform a rmware update on this printer. Use only one of the following

methods to update the printer rmware.

Method one: Update the rmware using the control panel

Use these steps to load the rmware from the control panel (for network-connected printers only), and/or set the

printer to automatically load future rmware updates. For USB-connected printers, skip to method two.

1. Make sure the printer is connected to a wired (Ethernet) or wireless network with an active Internet

connection.

NOTE: The printer must be connected to the internet to update the rmware via a network connection.

2. From the Home screen on the printer control panel, touch the Setup button .

3. Scroll to and open the Service menu, and then open the LaserJet Update menu.

NOTE: If the LaserJet Update option is not listed, use method two.

4. Touch Check for Updates Now to check for updates.

NOTE: The printer automatically checks for an update, and if a newer version is detected, the update

process automatically starts.

5. Set the printer to automatically update the rmware when updates become available.

From the Home screen on the printer control panel, touch the Setup button .

Scroll to and open the Service menu, open the LaserJet Update menu, and then select the Manage Updates

menu.

Set the Allow Updates option to YES, and then set the Check automatically option to ON.

Method two: Update the rmware using the Firmware Update Utility

Use these steps to manually download and install the Firmware Update Utility from HP.com.

NOTE: This method is the only rmware update option available for printers connected to the computer via a

USB cable. It also works for printers connected to a network.

NOTE: You must have a print driver installed in order to use this method.

1. Go to www.hp.com/go/support, click the Drivers & Software link, type the printer name in the search eld,

press the ENTER button, and then select the printer from the list of search results.

2. Select the operating system.

3. Under the Firmware section, locate the Firmware Update Utility.

4. Click Download, click Run, and then click Run again.

ENWW Update the rmware 93

5. When the utility launches, select the printer from the drop-down list, and then click Send Firmware.

NOTE: To print a conguration page to verify the installed rmware version before or after the update

process, click Print Cong.

6. Follow the on-screen instructions to complete the installation, and then click the Exit button to close the

utility.

94 Chapter 8 Manage the printer ENWW

9 Solve problems

●Customer support

●Control panel help system

●Restore the factory-set defaults

●A “Cartridge is low” or “Cartridge is very low” message displays on the printer control panel

●Printer does not pick up paper or misfeeds

●Clear paper jams

●Improve print quality

●Resolving print quality problems

●Improve copy and scan image quality

●Improve fax image quality

●Solve wired network problems

●Solve wireless network problems

●Solve fax problems

For more information:

The following information is correct at the time of publication. For current information, see www.hp.com/

support/ljM282MFP.

HP's all-inclusive help for the printer includes the following information:

●Install and congure

●Learn and use

●Solve problems

●Download software and rmware updates

●Join support forums

●Find warranty and regulatory information

ENWW 95

Customer support

Table 9-1 Customer support options

Support option Location

Get telephone support for your country/region

Have the printer name, serial number, date of purchase, and

problem description ready

Country/region phone numbers are on the yer that was in the box

with the printer or at support.hp.com.

Get 24-hour Internet support, and download software utilities and

drivers

www.hp.com/support/ljM282MFP

Order additional HP service or maintenance agreements www.hp.com/go/carepack

96 Chapter 9 Solve problems ENWW

Control panel help system

The printer has a built-in Help system that explains how to use each screen. To open the Help system, touch the

Help button in the lower-left corner of the screen.

For some screens, the Help opens to a global menu where you can search for specic topics. You can browse

through the menu structure by touching the buttons in the menu.

Some Help screens include animations that guide you through procedures, such as clearing jams.

For screens that contain settings for individual jobs, the Help opens to a topic that explains the options for that

screen.

If the printer alerts you of an error or warning, touch the Help button to open a message that describes the

problem. The message also contains instructions to help solve the problem.

ENWW Control panel help system 97

Restore the factory-set defaults

Restoring the factory-set defaults returns all of the printer and network settings to the factory defaults. It will

not reset the page count, or tray size. To restore the printer to the factory-default settings, follow these steps.

CAUTION: Restoring the factory-set defaults returns all of the settings to the factory defaults, and it also

deletes any pages that are stored in the memory.

1. From the Home screen on the printer control panel, swipe until the Setup menu displays. Touch the Setup

icon to open the menu.

2. Scroll to and select the Service menu.

3. Scroll to and select Restore Defaults, and then touch OK.

The printer automatically restarts.

98 Chapter 9 Solve problems ENWW

A “Cartridge is low” or “Cartridge is very low” message displays on

the printer control panel

Cartridge is low: The printer indicates when a toner cartridge level is low. Actual toner cartridge life remaining

may vary. Consider having a replacement available to install when print quality is no longer acceptable. The toner

cartridge does not need to be replaced now.

Continue printing with the current cartridge until redistributing the toner no longer yields acceptable print quality.

To redistribute the toner, remove the toner cartridge from the printer and gently rock the cartridge back and forth

end to end. Reinsert the toner cartridge into the printer and close the cover.

Cartridge is very low: The printer indicates when the cartridge level is very low. Actual cartridge life remaining

may vary. To extend the life of the toner, gently rock the cartridges back and forth end to end. Consider having a

replacement available to install when print quality is no longer acceptable. The cartridge does not need to be

replaced now unless the print quality is no longer acceptable.

HP’s Premium Protection Warranty expires when a message indicating that HP’s Premium Protection Warranty

on this supply has ended appears on the Supplies Status Page or the EWS.

Change the “Very Low” settings

You can change the way the printer reacts when supplies reach the Very Low state. You do not have to re-

establish these settings when you install a new toner cartridge.

1. From the Home screen on the printer control panel, swipe until the Setup menu displays. Touch the Setup

icon to open the menu.

2. Open the following menus:

a. System Setup

b. Supply Settings

c. Black Cartridge or Color Cartridges

d. Very Low Setting

3. Select one of the following options:

ENWW A “Cartridge is low” or “Cartridge is very low” message displays on the printer control panel 99

●Select the Continue option to set the printer to alert you that the toner cartridge is very low, but to

continue printing.

●Select the Stop option to set the printer to stop printing until you replace the toner cartridge.

●Select the Prompt option to set the printer to stop printing and prompt you to replace the toner

cartridge. You can acknowledge the prompt and continue printing. A customer congurable option on

this printer is "Prompt to Remind Me in 100 pages, 200 pages, 300 pages, 400 pages, or never." This

option is provided as a customer convenience and is not an indication these pages will have

acceptable print quality.

For printers with fax capability

When the printer is set to the Stop or Prompt option, there is some risk that faxes will not print when the printer

resumes printing. This can occur if the printer has received more faxes than the memory can hold while the

printer is waiting.

The printer can print faxes without interruption when it passes the Very Low threshold if you select the Continue

option for the toner cartridge, but print quality might degrade.

Order supplies

Table 9-2 Ordering options

Ordering option Ordering information

Order supplies and paper www.hp.com/go/suresupply

Order through service or support providers Contact an HP-authorized service or support provider.

Order using the HP Embedded Web Server (EWS) To access, in a supported web browser on your computer, enter the

printer IP address or host name in the address/URL eld. The EWS

contains a link to the HP SureSupply website, which provides

options for purchasing Original HP supplies.

100 Chapter 9 Solve problems ENWW

Printer does not pick up paper or misfeeds

Introduction

The following solutions can help solve problems if the printer is not picking up paper from the tray or is picking

up multiple sheets of paper at one time. Either of these situations can result in paper jams.

●The product does not pick up paper

●The product picks up multiple sheets of paper

●The document feeder jams, skews, or picks up multiple sheets of paper

The product does not pick up paper

If the product does not pick up paper from the tray, try these solutions.

1. Open the product and remove any jammed sheets of paper.

2. Load the tray with the correct size of paper for your job.

3. Make sure the paper size and type are set correctly on the product control panel.

4. Make sure the paper guides in the tray are adjusted correctly for the size of paper. Adjust the guides to the

appropriate indentation in the tray.

5. Check the product control panel to see if the product is waiting for you to acknowledge a prompt to feed

the paper manually. Load paper, and continue.

6. The rollers above the tray might be contaminated. Clean the rollers with a lint-free cloth dampened with

warm water.

The product picks up multiple sheets of paper

If the product picks up multiple sheets of paper from the tray, try these solutions.

1. Remove the stack of paper from the tray and ex it, rotate it 180 degrees, and ip it over. Do not fan the

paper. Return the stack of paper to the tray.

2. Use only paper that meets HP specications for this product.

3. Use paper that is not wrinkled, folded, or damaged. If necessary, use paper from a dierent package.

4. Make sure the tray is not overlled. If it is, remove the entire stack of paper from the tray, straighten the

stack, and then return some of the paper to the tray.

5. Make sure the paper guides in the tray are adjusted correctly for the size of paper. Adjust the guides to the

appropriate indentation in the tray.

6. Make sure the printing environment is within recommended specications.

The document feeder jams, skews, or picks up multiple sheets of paper

NOTE: This information applies to MFP printers only.

●The original might have something on it, such as staples or self-adhesive notes, that must be removed.

●Check that all rollers are in place and that the roller-access cover inside the document feeder is closed.

ENWW Printer does not pick up paper or misfeeds 101

●Make sure that the top document-feeder cover is closed.

●The pages might not be placed correctly. Straighten the pages and adjust the paper guides to center the

stack.

●The paper guides must be touching the sides of the paper stack to work correctly. Make sure that the paper

stack is straight and the guides are against the paper stack.

●The document feeder input tray or output bin might contain more than the maximum number of pages.

Make sure the paper stack ts below the guides in the input tray, and remove pages from the output bin.

●Verify that there are no pieces of paper, staples, paper clips, or other debris in the paper path.

●Clean the document-feeder rollers and the separation pad. Use compressed air or a clean, lint-free cloth

moistened with warm water. If misfeeds still occur, replace the rollers.

●From the Home screen on the printer control panel, scroll to and touch the Supplies button. Check the

status of the document-feeder kit, and replace it if necessary.

102 Chapter 9 Solve problems ENWW

Clear paper jams

Introduction

The following information includes instructions for clearing paper jams from the product.

●Paper jam locations

●Experiencing frequent or recurring paper jams?

●Clear paper jams in the document feeder

●Clear paper jams in the single-sheet slot (Tray 1)

●Clear paper jams in Tray 2

●Clear paper jams in the rear door and the fuser area

●Clear paper jams in the duplexer (duplex models only)

●Clear paper jams in the output bin

Paper jam locations

Table 9-3 Jam locations legend

Number Description

1 Document feeder

2 Output bin

3 Single-sheet priority feed slot (Tray 1)

4 Tray 2

ENWW Clear paper jams 103

Table 9-3 Jam locations legend (continued)

Number Description

5 Rear door and fuser area

6 Duplexer (duplex models only)

Experiencing frequent or recurring paper jams?

Follow these steps to solve problems with frequent paper jams. If the rst step does not resolve the problem

continue with the next step until you have resolved the problem.

1. If paper has jammed in the product, clear the jam and then print a conguration page to test the product.

2. Check that the tray is congured for the correct paper size and type on the product control panel. Adjust

paper settings if necessary.

a. From the Home screen on the product control panel, swipe until the Setup menu displays. Touch the

Setup icon to open the menu.

b. Open the following menus:

i. System Setup

ii. Paper setup

c. Select the tray from the list.

d. Select Default Paper Type and then select the type of paper that is in the tray.

e. Select Default Paper Size and then select the size of paper that is in the tray.

3. Turn the product o, wait 30 seconds, and then turn it on again.

4. Print a cleaning page to remove excess toner from inside the product.

a. From the Home screen on the product control panel, swipe until the Setup menu displays. Touch the

Setup icon to open the menu.

b. Touch the Service menu.

c. Touch the Cleaning Page button.

d. Load plain letter or A4 paper when you are prompted.

Wait until the process is complete. Discard the page that prints.

5. Print a conguration page to test the product.

a. From the Home screen on the product control panel, swipe until the Setup menu displays. Touch the

Setup icon to open the menu.

b. Open the Reports menu.

c. Select Conguration Report.

If none of these steps resolves the problem, the product might need service. Contact HP customer support.

104 Chapter 9 Solve problems ENWW

Clear paper jams in the document feeder

Use the following procedure to check for paper in all possible jam locations related to document feeder. When a

jam occurs, the control panel might display a message and an animation that assists in clearing the jam.

1. Open the document-feeder cover.

2. Remove any jammed paper.

3. Close the document feeder cover.

ENWW Clear paper jams 105

4. Lift the document feeder input tray to provide

better access to the document feeder output bin,

and then remove any jammed paper from the

output area.

5. Open the scanner lid. If paper is jammed behind

the white plastic backing, gently pull it out.

6. Lower the scanner lid.

NOTE: To avoid jams, make sure the guides in the document-feeder input tray are adjusted tightly against the

document. Remove all staples and paper clips from original documents.

106 Chapter 9 Solve problems ENWW

NOTE: Original documents that are printed on heavy, glossy paper can jam more frequently than originals that

are printed on plain paper.

ENWW Clear paper jams 107

Clear paper jams in the single-sheet slot (Tray 1)

Use the following procedure to clear jams in Tray 1. When a jam occurs, the control panel might display a

message and an animation that assists in clearing the jam.

1. Pull Tray 2 completely out of the printer.

2. Push down on the single-sheet priority feed slot,

and then pull out the feed slot tray.

3. Gently pull any jammed paper straight out of the

single-sheet priority feed slot.

108 Chapter 9 Solve problems ENWW

4. Push the single-sheet priority feed slot tray into

the printer.

5. Reinsert and close Tray 2.

ENWW Clear paper jams 109

Clear paper jams in Tray 2

Use the following procedure to check for paper in all possible jam locations related to Tray 2. When a jam occurs,

the control panel might display a message and an animation that assists in clearing the jam.

1. Pull the tray completely out of the printer.

2. Remove any jammed or damaged sheets of paper.

3. If no jammed paper is visible, or if jammed paper is

deep enough in the Tray 2 feed area that it is

diicult to remove, press down on the single-sheet

priority feed slot, and then remove the feed slot

tray.

110 Chapter 9 Solve problems ENWW

4. Remove any jammed or damaged sheets of paper.

5. Push the single-sheet priority feed slot tray into

the printer.

6. Reinsert and close Tray 2.

ENWW Clear paper jams 111

Clear paper jams in the rear door and the fuser area

Use the following procedure to clear jams in the rear door and fuser area. When a jam occurs, the control panel

might display a message and an animation that assists in clearing the jam.

CAUTION: The fuser can be hot while the printer is in use. Wait for the fuser to cool before handling it.

1. Open the rear door.

112 Chapter 9 Solve problems ENWW

2. Gently pull out any jammed paper from the rollers

in the rear door area.

CAUTION: The fuser can be hot while the printer

is in use. Wait for the fuser to cool before handling

it.

3. Close the rear door.

ENWW Clear paper jams 113

Clear paper jams in the duplexer (duplex models only)

Use the following procedure to clear jams in the duplexer. When a jam occurs, the control panel might display a

message and an animation that assists in clearing the jam.

CAUTION: The fuser can be hot while the printer is in use. Wait for the fuser to cool before handling it.

1. At the rear of the printer, open the duplexer.

114 Chapter 9 Solve problems ENWW

2. Remove any jammed or damaged sheets of paper.

CAUTION: The fuser can be hot while the printer

is in use. Wait for the fuser to cool before handling

it.

3. Close the duplexer.

ENWW Clear paper jams 115

Clear paper jams in the output bin

Use the following procedure to check for paper in all possible jam locations related to the output bin. When a jam

occurs, the control panel might display a message and an animation that assists in clearing the jam.

CAUTION: The fuser can be hot while the printer is in use. Wait for the fuser to cool before handling it.

1. Open the rear door.

2. If paper is visible in the output bin, grasp the

leading edge and remove it. Use both hands to

remove jammed paper to avoid tearing the paper.

116 Chapter 9 Solve problems ENWW

3. Gently remove any jammed paper from the rollers

in the rear door area.

CAUTION: The fuser can be hot while the printer

is in use. Wait for the fuser to cool before handling

it.

4. Close the rear door.

ENWW Clear paper jams 117

Improve print quality

●Introduction

●Update the printer rmware

●Print from a dierent software program

●Check the paper-type setting for the print job

●Check toner-cartridge status

●Print a cleaning page

●Visually inspect the toner cartridge or cartridges

●Check paper and the printing environment

●Try a dierent print driver

●Check the EconoMode settings

●Adjust Print Density

●Calibrate the printer to align the colors

●Adjust color settings (Windows)

●Print and interpret the print quality page

Introduction

The following information provides troubleshooting steps to resolve print-quality problems, including the

following problems:

●Smears

●Fuzzy print

●Dark print

●Light print

●Streaks

●Missing toner

●Scattered dots of toner

●Loose toner

●Skewed images

To resolve these or other print-quality problems, try the following solutions in the order presented.

For information about resolving specic image defects, see the Resolving print quality problems section of this

User Guide.

118 Chapter 9 Solve problems ENWW

Update the printer rmware

Try upgrading the printer rmware. For more information, see the Update the rmware section of this User

Guide.

Print from a dierent software program

Try printing from a dierent software program. If the page prints correctly, the problem is with the software

program from which you were printing.

Check the paper-type setting for the print job

Check the paper type setting when printing from a software program and the printed pages have smears, fuzzy

or dark print, curled paper, scattered dots of toner, loose toner, or small areas of missing toner.

Check the paper type setting on the printer

1. Open the tray.

2. Verify that the tray is loaded with the correct type of paper.

3. Close the tray.

4. Follow the control panel instructions to conrm or modify the paper type settings for the tray.

Check the paper type setting (Windows)

1. From the software program, select the Print option.

2. Select the printer, and then click the Properties or Preferences button.

3. Click the Paper/Quality tab.

4. From the Paper Type drop-down list, click the More... option.

5. Expand the list of Type is: options.

6. Expand the category of paper types that best describes your paper.

7. Select the option for the type of paper you are using, and click the OK button.

8. Click the OK button to close the Document Properties dialog box. In the Print dialog box, click the OK button

to print the job.

Check the paper type setting (macOS)

1. Click the File menu, and then click the Print option.

2. In the Printer menu, select the printer.

3. By default, the print driver displays the Copies & Pages menu. Open the menus drop-down list, and then

click the Finishing menu.

4. Select a type from the Media Type drop-down list.

5. Click the Print button.

ENWW Improve print quality 119

Check toner-cartridge status

Follow these steps to check the estimated life remaining in the toner cartridges and if applicable, the status of

other replaceable maintenance parts.

Step one: Print the supplies status page

1. From the Home screen on the printer control panel, select the Setup menu.

2. Select Reports.

3. Select Supplies Status.

Step two: Check supplies status

1. Look at the supplies status report to check the percent of life remaining for the toner cartridges and if

applicable, the status of other replaceable maintenance parts.

Print quality problems can occur when using a toner cartridge that is at its estimated end of life. The

supplies status page indicates when a supply level is very low.

HP’s Premium Protection Warranty expires when a message indicating that HP’s Premium Protection

Warranty on this supply has ended appears on the Supplies Status Page or the EWS.

The toner cartridge does not need to be replaced now unless the print quality is no longer acceptable.

Consider having a replacement available to install when print quality is no longer acceptable.

If you determine that you need to replace a toner cartridge or other replaceable maintenance parts, the

supplies status page lists the genuine HP part numbers.

2. Check to see if you are using a genuine HP cartridge.

A genuine HP toner cartridge has “HP” on it, or has the HP logo on it. For more information on identifying

HP cartridges go to www.hp.com/go/learnaboutsupplies.

Print a cleaning page

During the printing process paper, toner, and dust particles can accumulate inside the printer and can cause print-

quality issues such as toner specks or spatter, smears, streaks, lines, or repeating marks.

Use the following procedure to print a cleaning page.

1. From the Home screen on the printer control panel, select the Setup menu.

2. Select the following menus:

a. Service

b. Cleaning Page

3. Load plain letter or A4 paper when you are prompted, and then select OK.

A Cleaning message displays on the printer control panel. Wait until the process is complete. Discard the

page that prints.

120 Chapter 9 Solve problems ENWW

Visually inspect the toner cartridge or cartridges

Follow these steps to inspect each toner cartridge.

1. Remove the toner cartridges from the printer, and verify that the sealing tape has been removed.

2. Check the memory chip for damage.

3. Examine the surface of the green imaging drum.

CAUTION: Do not touch the imaging drum. Fingerprints on the imaging drum can cause print-quality

problems.

4. If you see any scratches, ngerprints, or other damage on the imaging drum, replace the toner cartridge.

5. Reinstall the toner cartridge, and print a few pages to see if the problem has resolved.

Check paper and the printing environment

Step one: Use paper that meets HP specications

Some print-quality problems arise from using paper that does not meet HP specications.

●Always use a paper type and weight that this printer supports.

●Use paper that is of good quality and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids,

staples, and curled or bent edges.

●Use paper that has not been previously printed on.

●Use paper that does not contain metallic material, such as glitter.

●Use paper that is designed for use in laser printers. Do not use paper that is designed only for use in Inkjet

printers.

●Use paper that is not too rough. Using smoother paper generally results in better print quality.

Step two: Check the environment

The environment can directly aect print quality and is a common cause for print-quality or paper-feeding

issues. Try the following solutions:

●Move the printer away from drafty locations, such as open windows or doors, or air-conditioning vents.

●Make sure the printer is not exposed to temperatures or humidity outside of printer specications.

●Do not place the printer in a conned space, such as a cabinet.

●Place the printer on a sturdy, level surface.

●Remove anything that is blocking the vents on the printer. The printer requires good air ow on all sides,

including the top.

●Protect the printer from airborne debris, dust, steam, grease, or other elements that can leave residue

inside the printer.

ENWW Improve print quality 121

Step three: Set the individual tray alignment

Follow these steps when text or images are not centered or aligned correctly on the printed page when printing

from specic trays.

1. From the Home screen on the printer control panel, select the Setup menu.

2. Select the following menus:

a. System Setup

b. Print Quality

c. Adjust Alignment

d. Print Test Page

3. Select the tray to adjust, and then follow the instructions on the printed pages.

4. Print the test page again to verify the results. Make further adjustments if necessary.

5. Select OK to save the new settings.

Try a dierent print driver

Try a dierent print driver when printing from a software program and the printed pages have unexpected lines

in graphics, missing text, missing graphics, incorrect formatting, or substituted fonts.

Download any of the following drivers from the HP Web site: www.hp.com/support/ljM282MFP.

Table 9-4 Print drivers

Driver Description

HP PCL.6 driver If available, this printer-specic print driver supports older operating systems like Windows®

XP and Windows Vista®. For a list of supported operating systems, go to www.hp.com/go/

support.

HP PCL 6 driver This printer-specic print driver supports Windows 7 and newer operating systems that

support version 3 drivers. For a list of supported operating systems, go to www.hp.com/go/

support.

HP PCL-6 driver This product-specic print driver supports Windows 8 and newer operating systems that

support version 4 drivers. For a list of supported operating systems, go to www.hp.com/go/

support.

HP UPD PS driver ●Recommended for printing with Adobe® software programs or with other highly

graphics-intensive software programs

●Provides support for printing from postscript emulation needs, or for postscript ash

font support

HP UPD PCL 6 ●Recommended for printing in all Windows environments

●Provides the overall best speed, print quality, and printer feature support for most

users

●Developed to align with Windows Graphic Device Interface (GDI) for best speed in

Windows environments

●Might not be fully compatible with third-party and custom software programs that are

based on PCL 5

122 Chapter 9 Solve problems ENWW

Check the EconoMode settings

HP does not recommend the full-time use of EconoMode. If EconoMode is used full-time, the toner supply might

outlast the mechanical parts in the toner cartridge. If print quality begins to degrade and is no longer acceptable,

consider replacing the toner cartridge.

NOTE: This feature is available with the PCL 6 print driver for Windows. If you are not using that driver, you can

enable the feature by using the HP Embedded Web Server.

Follow these steps if the entire page is too dark or too light.

1. From the software program, select the Print option.

2. Select the printer, and then click the Properties or Preferences button.

3. Click the Paper/Quality tab, and locate the Print Quality area.

4. If the entire page is too dark, use these settings:

●Select the 600 dpi option, if available.

●Select the EconoMode check box to enable it.

If the entire page is too light, use these settings:

●Select the FastRes 1200 option, if available.

●Clear the EconoMode check box to disable it.

5. Click the OK button to close the Document Properties dialog box. In the Print dialog, click the OK button to

print the job.

Adjust Print Density

Complete the following steps to adjust the print density.

1. Open the HP Embedded Web Server (EWS)::

a. From the Home screen on the printer control panel, touch the Network button or the Wireless

button to display the IP address or host name.

b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays

on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

NOTE: If the web browser displays a message indicating that accessing the website might not be

safe, select the option to continue to the website. Accessing this website will not harm the computer.

2. Click the System tab, and then select the Print Density page.

3. Select the correct density settings.

4. Click Apply to save the changes.

ENWW Improve print quality 123

Calibrate the printer to align the colors

Calibration is a printer function that optimizes print quality.

Follow these steps to resolve print-quality problems such as misaligned color, colored shadows, blurry graphics,

or other print-quality issues.

1. From the Home screen on the printer control panel, select the Setup menu.

2. Select the following menus:

a. System Setup

b. Print Quality

c. Color Calibration

d. Calibrate Now

3. 2-line control panels only: Select OK to start the calibration process.

4. A Calibrating message will display on the printer control panel. The calibration process takes a few minutes

to complete. Do not turn the printer o until the calibration process has nished. Wait while the printer

calibrates, and then try printing again.

Adjust color settings (Windows)

When printing from a software program, follow these steps if colors on the printed page do not match colors on

the computer screen, or if the colors on the printed page are not satisfactory.

Change the color options

1. From the software program, select the Print option.

2. Select the printer, and then click the Properties or Preferences button.

3. Click the Color tab.

4. Click the Print in Grayscale option to print a color document in black and shades of gray. Use this option to

print color documents for photocopying or faxing. Also use this option to print draft copies or to save color

toner.

5. Click the OK button to close the Document Properties dialog box. In the Print dialog box, click the OK button

to print the job.

Print and interpret the print quality page

1. From the Home screen on the printer control panel, select the Setup menu.

2. Select the Reports menu.

3. Select the Print Quality Page item.

This page contains ve bands of color, which are divided into four groups as indicated in the following illustration.

By examining each group, you can isolate the problem to a particular toner cartridge.

124 Chapter 9 Solve problems ENWW

Figure 9-1 Print quality page

Table 9-5 Print quality page legend

Section Toner cartridge

1 Yellow

2 Cyan

3 Black

4 Magenta

●If dots or streaks appear in only one of the groups, replace the toner cartridge that correlates with that

group.

●If dots appear in more than one group, print a cleaning page. If this does not solve the problem, determine

if the dots are always the same color; for example, if magenta dots appear in all ve color bands. If the dots

are all the same color, replace that toner cartridge.

●If streaks appear in multiple color bands, contact HP. A component other than the toner cartridge is

probably causing the problem.

ENWW Improve print quality 125

Resolving print quality problems

●Introduction

●Troubleshoot print quality problems

Introduction

The following information provides troubleshooting steps for solving image defect issues, including the following

defects:

●Light print

●Gray background or dark print

●Blank pages

●Black pages

●Dark or light bands

●Dark or light streaks

●Missing toner

●Skewed images

●Colors that do not align

●Curled paper

Troubleshoot print quality problems

Table 9-6 Image defects table quick reference

Defect Defect Defect

Table 9-7 Light print on page 128 Table 9-8 Gray background or dark print

on page 129

Table 9-9 Blank page — No print on page 129

126 Chapter 9 Solve problems ENWW

Table 9-6 Image defects table quick reference (continued)

Defect Defect Defect

Table 9-10 Black page on page 130 Table 9-11 Banding defects on page 130 Table 9-12 Streak defects on page 131

Table 9-13 Fixing/fuser defects on page 132 Table 9-14 Image placement defects

on page 132

Table 9-15 Color plane registrations defects

(color models only) on page 133

Table 9-16 Output defects on page 133

Image defects, no matter the cause, can often be resolved using the same steps. Use the following steps as a

starting point for solving image defect issues.

ENWW Resolving print quality problems 127

1. Reprint the document. Print quality defects can be intermittent in nature or can go away completely with

continued printing.

2. Check the condition of the cartridge or cartridges. If a cartridge is in a Very Low state (it has passed the

rated life), replace the cartridge.

3. Make sure that the driver and tray print mode settings match the media that is loaded in the tray. Try using

a dierent ream of media or a dierent tray. Try using a dierent print mode.

4. Make sure that the printer is within the supported operating temperature/humidity range.

5. Make sure that the paper type, size, and weight are supported by the printer. See the printer support page

at support.hp.com for a list of the supported paper sizes and types for the printer.

NOTE: The term “fusing” refers to the part of the printing process where toner is aixed to paper.

The following examples depict letter-size paper that has passed through the printer short-edge rst.

Table 9-7 Light print

Description Sample Possible solutions

Light print:

The printed content on the entire page is

light or faded.

1. Reprint the document.

2. Remove the cartridge, and then shake

it to redistribute the toner. Reinsert

the toner cartridges into the printer

and close the cover. For a graphical

representation of this procedure, see

Replace the toner cartridges.

3. Mono models only: Make sure that the

Economode setting is disabled both at

the printer control panel and in the

print driver.

4. Make sure that the cartridge is

installed correctly.

5. Print a Supply status page and check

for life and usage of the cartridge.

6. Replace the cartridge.

7. If the problem persists, go to

support.hp.com.

128 Chapter 9 Solve problems ENWW

Table 9-8 Gray background or dark print

Description Sample Possible solutions

Gray background or dark print:

The image or text is darker than expected.

1. Make sure that the paper in the trays

has not already been run through the

printer.

2. Use a dierent paper type.

3. Reprint the document.

4. Mono models only: From the Home

screen on the printer control panel, go

to the Adjust Toner Density menu, and

then adjust the toner density to a

lower level.

5. Make sure that the printer is in within

the supported operating temperature

and humidity range.

6. Replace the cartridge.

7. If the problem persists, go to

support.hp.com.

Table 9-9 Blank page — No print

Description Sample Possible solutions

Blank page — No print:

The page is completely blank and contains

no printed content.

1. Make sure that the cartridge is

genuine HP cartridges.

2. Make sure that the cartridge is

installed correctly.

3. Print with a dierent cartridge.

4. Check the paper type in the paper tray

and adjust the printer settings to

match. If necessary, select a lighter

paper type.

5. If the problem persists, go to

support.hp.com.

ENWW Resolving print quality problems 129

Table 9-10 Black page

Description Sample Possible solutions

Black page:

The entire printed page is black.

1. Visually inspect the cartridge to check

for damage.

2. Make sure that the cartridge is

installed correctly.

3. Replace the cartridge

4. If the problem persists, go to

support.hp.com.

Table 9-11 Banding defects

Description Sample Possible solutions

Repetitive wide-pitch banding and Impulse

bands:

Dark or light lines which repeat down the

length of the page. They might be sharp or

soft in nature. The defect displays only in

areas of ll, not in text or sections with no

printed content.

1. Reprint the document.

2. Try printing from another tray.

3. Replace the cartridge.

4. Use a dierent paper type.

5. Enterprise models only: From the

Home screen on the printer control

panel, go to the Adjust Paper Types

menu, and then choose a print mode

that is designed for a slightly heavier

media than what you are using. This

slows the print speed and might

improve the print quality.

6. If the problem persists, go to

support.hp.com.

130 Chapter 9 Solve problems ENWW

Table 9-12 Streak defects

Description Sample Possible solutions

Light vertical streaks:

Light streaks that usually span the length of

the page. The defect displays only in areas

of ll, not in text or sections with no printed

content.

1. Reprint the document.

2. Remove the cartridge, and then shake

it to redistribute the toner.

3. If the problem persists, go to

support.hp.com.

NOTE: Both light and dark vertical streaks

can occur when the printing environment is

outside the specied range for temperature

or humidity. Refer to your printer's

environmental specications for allowable

temperature and humidity levels.

Dark vertical streaks and ITB cleaning

streaks (color models only):

Dark lines which occur down the length of

the page. The defect might occur anywhere

on the page, in areas of ll or in sections

with no printed content.

1. Reprint the document.

2. Remove the cartridge, and then shake

it to redistribute the toner.

3. Print a cleaning page.

4. Check the toner level in the cartridge.

5. If the problem persists, go to

support.hp.com.

ENWW Resolving print quality problems 131

Table 9-13 Fixing/fuser defects

Description Sample Possible solutions

Hot fuser oset (shadow):

Slight shadows, or osets, of the image

repeated down the page. The repeated

image might fade with each recurrence.

1. Reprint the document.

2. Check the paper type in the paper tray

and adjust the printer settings to

match. If necessary, select a lighter

paper type.

3. If the problem persists, go to

support.hp.com.

Poor fusing:

Toner rubs o along either edge of page.

This defect is more common at the edges of

high-coverage jobs and on light media types

but can occur anywhere on the page.

1. Reprint the document.

2. Check the paper type in the paper tray

and adjust the printer settings to

match. If necessary, select a heavier

paper type.

3. Enterprise models only: From the

printer control panel, go to the Edge-

to-Edge menu and then select Normal.

Reprint the document.

4. Enterprise models only: From the

printer control panel, select Auto

Include Margins and then reprint the

document.

5. If the problem persists, go to

support.hp.com.

Table 9-14 Image placement defects

Description Sample Possible solutions

Margins and skew:

The image is not centered, or is skewed on

the page. The defect occurs when the paper

is not positioned properly as it is pulled from

the tray and moves through the paper path.

1. Reprint the document.

2. Remove the paper and then reload the

tray. Make sure that all the paper

edges are even on all sides.

3. Make sure that the top of the paper

stack is below the tray full indicator.

Do not overll the tray.

4. Make sure that the paper guides are

adjusted to the correct size for the

paper. Do not adjust the paper guides

tightly against the paper stack. Adjust

them to the indentations or markings

in the tray.

5. If the problem persists, go to

support.hp.com.

132 Chapter 9 Solve problems ENWW

Table 9-15 Color plane registrations defects (color models only)

Description Sample Possible solutions

Color plane registrations:

One or more color of the planes is not

aligned with the other color planes. The

primary error will typically occur with yellow.

1. Reprint the document.

2. From the printer control panel,

calibrate the printer.

3. If a cartridge has reached a Very Low

state or the printed output is severely

faded, replace the cartridge.

4. From the printer control panel use the

Restore Calibration feature to reset

the printer's calibration settings to the

factory defaults.

5. If the problem persists, go to

support.hp.com.

Table 9-16 Output defects

Description Sample Possible solutions

Output curl:

Printed paper has curled edges. The curled

edge can be along the short or long side of

the paper. Two types of curl are possible:

●Positive curl: The paper curls toward

the printed side. The defect occurs in

dry environments or when printing

high coverage pages.

●Negative curl: The paper curls away

from the printed side. The defect

occurs in high-humidity environments

or when printing low coverage pages.

1. Reprint the document.

2. Positive curl: From the printer control

panel, select a heavier paper type. The

heavier paper type creates a higher

temperature for printing.

Negative curl: From the printer control

panel, select a lighter paper type. The

lighter paper type creates a lower

temperature for printing. Try storing

the paper in a dry environment prior or

use freshly opened paper.

3. Print in duplex mode.

4. If the problem persists, go to

support.hp.com.

Output stacking:

The paper does not stack well in the output

tray. The stack might be uneven, skewed, or

the pages might be pushed out of the tray

and onto the oor. Any of the following

conditions can cause this defect:

●Extreme paper curl

●The paper in the tray is wrinkled or

deformed

●The paper is a non-standard paper

type, such as envelopes

●The output tray is too full

1. Reprint the document.

2. Extend the output bin extension.

3. If the defect is caused by extreme

paper curl, complete the

troubleshooting steps for Output curl.

4. Use a dierent paper type.

5. Use freshly opened paper.

6. Remove the paper from the output

tray before the tray gets too full.

7. If the problem persists, go to

support.hp.com.

ENWW Resolving print quality problems 133

Improve copy and scan image quality

Introduction

If the printer is having image quality problems, try the following solutions in the order presented to resolve the

issue.

●Check the scanner glass for dirt and smudges

●Eliminate lines or streaks when using the document feeder

●Check the paper settings

●Check the image adjustment settings

●Optimize for text or pictures

●Check the scanner resolution and color settings on the computer

●Edge-to-edge copying

●Clean the pickup rollers and separation pad in the document feeder

Try these few simple steps rst:

●Use the atbed scanner rather than the document feeder.

●Use high-quality originals.

●When using the document feeder, load the original document into the feeder correctly, using the paper

guides, to avoid unclear or skewed images.

If the problem still exists, try these additional solutions. If they do not x the problem, see “Improve print quality”

for further solutions.

Check the scanner glass for dirt and smudges

Over time, specks of debris might collect on the scanner glass and white plastic backing, which can aect

performance. Use the following procedure to clean the scanner.

1. Press the power button to turn the printer o, and then disconnect the power cable from the electrical

outlet.

2. Open the scanner lid.

3. Clean the scanner glass and the white plastic backing underneath the scanner lid with a soft cloth or

sponge that has been moistened with nonabrasive glass cleaner.

CAUTION: Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on

any part of the printer; these can damage the printer. Do not place liquids directly on the glass or platen.

They might seep and damage the printer.

4. Dry the glass and white plastic parts with a chamois or a cellulose sponge to prevent spotting.

5. Connect the power cable to an outlet, and then press the power button to turn the printer on.

134 Chapter 9 Solve problems ENWW

Eliminate lines or streaks when using the document feeder

If lines or streaks appear on copied or scanned documents when using the document feeder, use the procedure

below to clean debris from the document feeder glass. Debris can include dust, paper or toner dust, residue from

sticky note adhesive, correction uid or tape, ink, ngerprints, and more.

1. Open the scanner lid.

2. Locate the one-inch strip of glass to the left of the main scanner atbed glass, and then use a soft, lint-free

cloth moistened with water to clean the glass strip.

CAUTION: Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on

any part of the product; these can damage the product. Do not place liquids directly on the glass or platen.

They might seep and damage the product.

3. On the underside of the scanner lid above the strip of glass, use a soft, lint-free cloth moistened with water

to clean the upper plastic strip.

4. Dry the glass strip and the upper strip with a soft, dry cloth to prevent spotting, and then try again to copy

or scan.

Check the paper settings

1. From the Home screen on the printer control panel, touch the Copy icon .

2. Touch the Settings button, and then scroll to and touch the Paper button.

3. From the list of paper sizes, touch the name of the paper size that is in the tray.

4. From the list of paper types, touch the name of the paper type that is in the tray.

Check the image adjustment settings

1. From the Home screen, touch the Copy button.

2. Touch the Settings button, and then scroll to and touch the Image Adjustment button.

3. Touch the name of the setting you want to adjust.

●Lightness: Adjusts the lightness/darkness setting.

●Contrast: Adjusts the contrast between the lightest and darkest areas of the image.

●Sharpen: Adjusts clarity of text characters.

●Background Removal: Adjusts the darkness of the background of the image. This is especially useful

for original documents that are printed on colored paper.

●Color Balance: Adjusts the red, green, and blue color hues.

●Grayness: Adjusts the vividness of colors.

4. Touch the — or + buttons to adjust the value for the setting, and then touch the OK button.

5. Adjust another setting, or touch the back arrow to return to the main copy menu.

ENWW Improve copy and scan image quality 135

Optimize for text or pictures

1. From the Home screen on the printer control panel, touch the Copy icon .

2. Touch the Settings button, and then scroll to and touch the Optimize button.

3. Touch the name of the setting you want to adjust.

●Auto Select: Use this setting when you are not concerned about the quality of the copy. This is the

default setting.

●Mixed: Use this setting for documents that contain a mixture of text and graphics.

●Text: Use this setting for documents that contain mostly text.

●Picture: Use this setting for documents that contain mostly graphics.

Check the scanner resolution and color settings on the computer

If you are printing a scanned image, and the quality is not what you expected, you might have selected a

resolution or color setting in the scanner software that does not match your needs. Resolution and color aect

the following features of scanned images:

●Image clarity

●Texture of gradations (smooth or rough)

●Scan time

●File size

Scanning resolution is measured in pixels per inch (ppi).

NOTE: Scanning ppi levels are not interchangeable with printing dpi (dots per inch) levels.

Color, grayscale, and black and white dene the number of colors possible. You can adjust the scanner hardware

resolution to up to 1200 ppi.

The resolution and color guidelines table lists simple tips that you can follow to meet your scanning needs.

NOTE: Setting the resolution and color to a high value can create large les that take up disk space and slow

the scanning process. Before setting the resolution and color, determine how you are going to use the scanned

image.

Resolution and color guidelines

The following table describes the recommended resolution and color settings for dierent types of scan jobs.

NOTE: The default resolution is 200 ppi.

Table 9-17 Recommended resolution and color settings

Intended use Recommended resolution Recommended color settings

Fax 150 ppi ●Black and White

136 Chapter 9 Solve problems ENWW

Table 9-17 Recommended resolution and color settings (continued)

Intended use Recommended resolution Recommended color settings

Email 150 ppi ●Black and White, if the image does not

require smooth gradation

●Grayscale, if the image requires

smooth gradation

●Color, if the image is in color

Edit text 300 ppi ●Black and White

Print (graphics or text) 600 ppi for complex graphics, or if you want

to signicantly enlarge the document

300 ppi for normal graphics and text

150 ppi for photos

●Black and White for text and line art

●Grayscale for shaded or colored

graphics and photos

●Color, if the image is in color

Display on screen 75 ppi ●Black and White for text

●Grayscale for graphics and photos

●Color, if the image is in color

Color

You can set the color values to the following settings when scanning.

Table 9-18 Color settings

Setting Recommended use

Color Use this setting for high-quality color photos or documents in which

the color is important.

Black and White Use this setting for text documents.

Grayscale Use this setting when le size is an issue or when you want to scan

a document or photograph quickly.

Edge-to-edge copying

The printer cannot print fully edge-to-edge. There is a 4 mm (1/6 inch) unprintable border around the page.

Considerations for printing or scanning documents with cropped edges:

●When the original is smaller than the output size, move the original 4 mm (1/6 inch) away from the corner

indicated by the icon on the scanner. Recopy or scan in this position.

●When the original is the size of the printed output that you want, use the Reduce/Enlarge feature to reduce

the image so the copy is not cropped.

ENWW Improve copy and scan image quality 137

Clean the pickup rollers and separation pad in the document feeder

If the document feeder experiences paper-handling problems, such as jams or multiple-page feeds, clean the

document-feeder rollers and separation pad.

1. Open the document-feeder access cover.

2. Use a moist, lint-free cloth to wipe both pickup

rollers and the separation pad to remove dirt.

CAUTION: Do not use abrasives, acetone,

benzene, ammonia, ethyl alcohol, or carbon

tetrachloride on any part of the printer; these can

damage the printer.

3. Close the document feeder access cover.

138 Chapter 9 Solve problems ENWW

Improve fax image quality

Introduction

If the printer is having image quality problems, try the following solutions in the order presented to resolve the

issue.

●Check the scanner glass for dirt and smudges

●Check the send-fax resolution settings

●Check the error-correction settings

●Check the t-to-page setting

●Clean the pickup rollers and separation pad in the document feeder

●Send to a dierent fax machine

●Check the sender's fax machine

Try these few simple steps rst:

●Use the atbed scanner rather than the document feeder.

●Use high-quality originals.

●When using the document feeder, load the original document into the feeder correctly, using the paper

guides, to avoid unclear or skewed images.

If the problem still exists, try these additional solutions. If they do not x the problem, see “Improve print quality”

for further solutions.

Check the scanner glass for dirt and smudges

Over time, specks of debris might collect on the scanner glass and white plastic backing, which can aect

performance. Use the following procedure to clean the scanner.

1. Press the power button to turn the printer o, and then disconnect the power cable from the electrical

outlet.

2. Open the scanner lid.

3. Clean the scanner glass and the white plastic backing underneath the scanner lid with a soft cloth or

sponge that has been moistened with nonabrasive glass cleaner.

CAUTION: Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on

any part of the printer; these can damage the printer. Do not place liquids directly on the glass or platen.

They might seep and damage the printer.

4. Dry the glass and white plastic parts with a chamois or a cellulose sponge to prevent spotting.

5. Connect the power cable to an outlet, and then press the power button to turn the printer on.

ENWW Improve fax image quality 139

Check the send-fax resolution settings

If the printer was unable to send a fax because the receiving fax machine did not answer or was busy, the printer

attempts to redial based on the redial-on-busy, redial-on-no-answer, and redial-on-communication-error

options.

1. From the Home screen on the printer control panel, swipe until the Setup menu displays. Touch the Setup

icon to open the menu.

2. Touch the Fax Setup menu.

3. Touch the Advanced Setup menu.

4. Open the Fax Resolution menu.

Check the error-correction settings

Usually, the printer monitors the signals on the telephone line while it is sending or receiving a fax. If the printer

detects an error during the transmission and the error-correction setting is On, the printer can request that the

portion of the fax be resent. The factory-set default for error correction is On.

You should turn o error correction only if you are having trouble sending or receiving a fax, and you are willing

to accept the errors in the transmission. Turning o the setting might be useful when you are trying to send a fax

overseas or receive one from overseas, or if you are using a satellite telephone connection.

1. From the Home screen on the printer control panel, swipe until the Setup menu displays. Touch the Setup

icon to open the menu.

2. Touch the Service menu.

3. Touch the Fax Service menu.

4. Touch the Error Correction button, and then touch the On button.

Check the t-to-page setting

If the printer printed a fax job o the page, turn on the t-to-page feature from the printer control panel.

NOTE: Make sure that the default paper size setting matches the size of the paper in the tray.

1. From the Home screen on the printer control panel, swipe until the Setup menu displays. Touch the Setup

icon to open the menu.

2. Touch the Fax Setup menu.

3. Touch the Advanced Setup menu.

4. Touch the Fit to Page button, and then touch the On button.

140 Chapter 9 Solve problems ENWW

Clean the pickup rollers and separation pad in the document feeder

If the document feeder experiences paper-handling problems, such as jams or multiple-page feeds, clean the

document-feeder rollers and separation pad.

1. Open the document-feeder access cover.

2. Use a moist, lint-free cloth to wipe both pickup

rollers and the separation pad to remove dirt.

CAUTION: Do not use abrasives, acetone,

benzene, ammonia, ethyl alcohol, or carbon

tetrachloride on any part of the printer; these can

damage the printer.

3. Close the document feeder access cover.

ENWW Improve fax image quality 141

Send to a dierent fax machine

Try sending the fax to a dierent fax machine. If the fax quality is better, the problem is related to the initial

recipient's fax machine settings or supplies status.

Check the sender's fax machine

Ask the sender to try sending from a dierent fax machine. If the fax quality is better, the problem is with the

sender's fax machine. If a dierent fax machine is unavailable, ask the sender to consider making the following

changes:

●Make sure the original document is on white (not colored) paper.

●Increase the fax resolution, quality level, or contrast settings.

●If possible, send the fax from a computer software program.

142 Chapter 9 Solve problems ENWW

Solve wired network problems

Introduction

Certain types of problems can indicate there is a network communication problem. These problems include the

following issues:

●The periodic loss of ability to communicate with the printer

●The printer cannot be found during driver installation

●A periodic failure to print

NOTE: If you have been experiencing intermittent loss of network connectivity, rst update the printer

rmware. For instructions on how to update the printer rmware, go tohttp://support.hp.com, search for your

printer, and then search on “update the rmware.”

Check the following items to verify that the printer is communicating with the network. Before beginning, print a

conguration page from the printer control panel and locate the printer IP address that is listed on this page.

●Poor physical connection

●The computer is using the incorrect IP address for the printer

●The computer is unable to communicate with the printer

●The printer is using incorrect link and duplex settings for the network

●New software programs might be causing compatibility problems

●The computer or workstation might be set up incorrectly

●The printer is disabled, or other network settings are incorrect

NOTE: HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating

systems and not of the HP print drivers. For more information, go to Microsoft at www.microsoft.com.

Poor physical connection

1. Verify that the printer is attached to the correct network port using a cable of the correct length.

2. Verify that cable connections are secure.

3. Look at the network port connection on the back of the printer, and verify that the amber activity light

ashes indicating network traic, and the green link-status light is continuously lit indicating a network link.

4. If the problem continues, try a dierent cable or port on the hub.

The computer is using the incorrect IP address for the printer

1. Open the printer properties and click the Ports tab. Verify that the current IP address for the printer is

selected. The printer IP address is listed on the printer conguration page.

2. If you installed the printer using the HP standard TCP/IP port, select the box labeled Always print to this

printer, even if its IP address changes.

ENWW Solve wired network problems 143

3. If you installed the printer using a Microsoft standard TCP/IP port, use the hostname instead of the IP

address.

4. If the IP address is correct, delete the printer and then add it again.

The computer is unable to communicate with the printer

1. Test network communication by pinging the network.

a. Open a command-line prompt on your computer.

●For Windows, click Start, click Run, type cmd, and then press Enter.

●For macOS, go to Applications, then Utilities, and open Terminal.

b. Type ping followed by the IP address for your printer.

c. If the window displays round-trip times, the network is working.

2. If the ping command failed, verify that the network hubs are on, and then verify that the network settings,

the printer, and the computer are all congured for the same network (also known as subnet).

3. Open the printer properties and click the Ports tab. Verify that the current IP address for the printer is

selected. The printer IP address is listed on the printer conguration page.

4. If you installed the printer using the HP standard TCP/IP port, select the box labeled Always print to this

printer, even if its IP address changes.

5. If you installed the printer using a Microsoft standard TCP/IP port, use the printer’s hostname instead of the

IP address.

6. If the IP address is correct, delete the printer and then add it again.

The printer is using incorrect link and duplex settings for the network

HP recommends leaving these settings in automatic mode (the default setting). If you change these settings, you

must also change them for your network.

New software programs might be causing compatibility problems

Verify that any new software programs are correctly installed and that they use the correct print driver.

The computer or workstation might be set up incorrectly

1. Check the network drivers, print drivers, and the network redirection settings.

2. Verify that the operating system is congured correctly.

The printer is disabled, or other network settings are incorrect

1. Review the printer’s conguration/networking pages to check the status of the network settings and

protocols.

2. Recongure the network settings if necessary.

144 Chapter 9 Solve problems ENWW

Solve wireless network problems

●Introduction

●Wireless connectivity checklist

●The printer does not print after the wireless conguration completes

●The printer does not print, and the computer has a third-party rewall installed

●The wireless connection does not work after moving the wireless router or printer

●Cannot connect more computers to the wireless printer

●The wireless printer loses communication when connected to a VPN

●The network does not appear in the wireless networks list

●The wireless network is not functioning

●Perform a wireless network diagnostic test

●Reduce interference on a wireless network

Introduction

Use the troubleshooting information to help resolve issues.

NOTE: To determine whether Wi-Fi Direct printing is enabled on your printer, print a conguration page from

the printer control panel

Wireless connectivity checklist

●Verify that the network cable is not connected.

●Verify that the printer and the wireless router are turned on and have power. Also make sure that the

wireless radio in the printer is turned on.

●Verify that the service set identier (SSID) is correct. Print a conguration page to determine the SSID. If you

are not sure the SSID is correct, run the wireless setup again.

●With secured networks, verify that the security information is correct. If the security information is

incorrect, run the wireless setup again.

●If the wireless network is working correctly, try accessing other computers on the wireless network. If the

network has Internet access, try connecting to the Internet over a wireless connection.

●Verify that the encryption method (AES or TKIP) is the same for the printer as it is for the wireless access

point (on networks using WPA security).

●Verify that the printer is within the range of the wireless network. For most networks, the printer must be

within 30 m (100 ft) of the wireless access point (wireless router).

●Verify that obstacles do not block the wireless signal. Remove any large metal objects between the access

point and the printer. Make sure poles, walls, or support columns containing metal or concrete do not

separate the printer and wireless access point.

ENWW Solve wireless network problems 145

●Verify that the printer is located away from electronic devices that might interfere with the wireless signal.

Many devices can interfere with the wireless signal including motors, cordless phones, security system

cameras, other wireless networks, and some Bluetooth devices.

●Verify that the print driver is installed on the computer.

●Verify that you have selected the correct printer port.

●Verify that the computer and printer connect to the same wireless network.

●For macOS, verify that the wireless router supports Bonjour.

The printer does not print after the wireless conguration completes

1. Make sure that the printer is turned on and in the ready state.

2. Turn o any third-party rewalls on your computer.

3. Make sure that the wireless network is working correctly.

4. Make sure that your computer is working correctly. If necessary, restart the computer.

5. Verify that you can open the printer HP Embedded Web Server from a computer on the network.

The printer does not print, and the computer has a third-party rewall installed

1. Update the rewall with the most recent update available from the manufacturer.

2. If programs request rewall access when you install the printer or try to print, make sure you allow the

programs to run.

3. Temporarily turn o the rewall, and then install the wireless printer on the computer. Enable the rewall

when you have completed the wireless installation.

The wireless connection does not work after moving the wireless router or printer

1. Make sure that the router or printer connects to the same network that your computer connects to.

2. Print a conguration page.

3. Compare the service set identier (SSID) on the conguration page to the SSID in the printer conguration

for the computer.

4. If the numbers are not the same, the devices are not connecting to the same network. Recongure the

wireless setup for the printer.

Cannot connect more computers to the wireless printer

1. Make sure that the other computers are within the wireless range and that no obstacles block the signal.

For most networks, the wireless range is within 30 m (100 ft) of the wireless access point.

2. Make sure that the printer is turned on and in the ready state.

3. Make sure there are not more than 5 concurrent Wi-Fi Direct users.

4. Turn o any third-party rewalls on your computer.

146 Chapter 9 Solve problems ENWW

5. Make sure that the wireless network is working correctly.

6. Make sure that your computer is working correctly. If necessary, restart the computer.

The wireless printer loses communication when connected to a VPN

●Typically, you cannot connect to a VPN and other networks at the same time.

The network does not appear in the wireless networks list

●Make sure the wireless router is turned on and has power.

●The network might be hidden. However, you can still connect to a hidden network.

The wireless network is not functioning

1. Make sure that the network cable is not connected.

2. To verify if the network has lost communication, try connecting other devices to the network.

3. Test network communication by pinging the network.

a. Open a command-line prompt on your computer.

●For Windows, click Start, click Run, type cmd, and then press Enter.

●For macOS, go to Applications, then Utilities, and open Terminal.

b. Type ping followed by the router IP address.

c. If the window displays round-trip times, the network is working.

4. Make sure that the router or printer connects to the same network that the computer connects to.

a. Print a conguration page.

b. Compare the service set identier (SSID) on the conguration report to the SSID in the printer

conguration for the computer.

c. If the numbers are not the same, the devices are not connecting to the same network. Recongure

the wireless setup for the printer.

Perform a wireless network diagnostic test

From the printer control panel, you can run a diagnostic test that provides information about the wireless

network settings.

1. From the Home screen on the printer control panel, swipe until the Setup menu displays. Touch the Setup

icon to open the menu.

2. Scroll to and select Self Diagnostics.

3. Select Run Wireless Test to start the test. The printer prints a test page that shows test results.

Reduce interference on a wireless network

The following tips can reduce interference in a wireless network:

ENWW Solve wireless network problems 147

●Keep the wireless devices away from large metal objects, such as ling cabinets, and other electromagnetic

devices, such as microwaves and cordless telephones. These objects can disrupt radio signals.

●Keep the wireless devices away from large masonry structures and other building structures. These objects

can absorb radio waves and lower signal strength.

●Position the wireless router in a central location in line of sight with the wireless printers on the network.

148 Chapter 9 Solve problems ENWW

Solve fax problems

Introduction

Use the fax troubleshooting information to help resolve issues.

●Fax troubleshooting checklist

●Solve general fax problems

Fax troubleshooting checklist

●Several possible xes are available. After each recommended action, retry faxing to see if the problem is

resolved.

●For best results during fax problem solving, make sure the line from the printer is connected directly to the

wall phone port. Disconnect all other devices that are connected to the printer.

1. Verify that the telephone cord is connected to the correct port on the back of the printer.

2. Check the phone line by using the fax test:

a. From the Home screen on the printer control panel, swipe until the Setup menu displays. Touch the

Setup icon to open the menu.

b. Open the following menus:

i. Service

ii. Fax Service

c. Select the Run Fax Test option. The printer prints a fax test report.

The report contains the following possible results:

●Pass: The report contains all of the current fax settings for review.

●Fail: The report indicates the nature of the error and contains suggestions for how to resolve the

issue.

3. Verify that the printer rmware is current:

a. Print a conguration page from the control panel Reports menu to obtain the current rmware date

code.

b. Go to www.hp.com/go/support, click the Drivers & Software link, type the printer name in the search

eld, press the ENTER button, and then select the printer from the list of search results.

c. Select the operating system.

d. Under the Firmware section, locate the Firmware Update Utility.

NOTE: Make sure to use the rmware update utility that is specic to the printer model.

e. Click Download, click Run, and then click Run again.

f. When the utility launches, select the printer from the drop-down list, and then click Send Firmware.

ENWW Solve fax problems 149

NOTE: To print a conguration page to verify the installed rmware version before or after the

update process, click Print Cong.

g. Follow the on-screen instructions to complete the installation, and then click the Exit button to close

the utility.

4. Verify that the fax was set up when the printer software was installed.

From the computer, in the HP program folder, run the Fax Setup Utility.

5. Verify that the telephone service supports analog fax.

●If using ISDN or digital PBX, contact your service provider for information about conguring to an

analog fax line.

●If using a VoIP service, change the Fax Speed setting to Slow (V.29) from the control panel. Ask if your

service provider supports fax and for the recommended fax modem speed. Some companies might

require an adapter.

●If you are using a DSL service, make sure that a lter is included on the phone-line connection to the

printer. Contact the DSL service provider, or purchase a DSL lter if you do not have one. If a DSL lter

is installed, try another lter because lters can be defective.

Solve general fax problems

●Faxes are sending slowly

●Fax quality is poor

●Fax cuts o or prints on two pages

Faxes are sending slowly

The printer is experiencing poor phone line quality.

●Retry sending the fax when the line conditions have improved.

●Check with the phone service provider that the line supports fax.

●Turn o the Error Correction setting.

a. Open the Setup Menu.

b. Open the Service menu.

c. Open the Fax Service menu.

d. Open the Error Correction menu.

e. Select the O setting.

NOTE: This can reduce image quality.

●Use white paper for the original. Do not use colors such as gray, yellow, or pink.

●Increase the Fax Speed setting.

150 Chapter 9 Solve problems ENWW

a. Open the Setup Menu.

b. Open the Fax Setup menu.

c. Open the Advanced Setup menu.

d. Open the Fax Speed menu.

e. Select the correct setting.

●Divide large fax jobs into smaller sections, and then fax them individually.

●Change the fax settings on the control panel to a lower resolution.

a. Open the Setup Menu.

b. Open the Fax Setup menu.

c. Open the Advanced Setup menu.

d. Open the Fax Resolution menu.

e. Select the correct setting.

Fax quality is poor

Fax is blurry or light.

●Increase fax resolution when sending faxes. Resolution does not aect received faxes.

a. Open the Setup Menu.

b. Open the Fax Setup menu.

c. Open the Advanced Setup menu.

d. Open the Fax Resolution menu.

e. Select the correct setting.

NOTE: Increasing resolution slows transmission speed.

●Turn on the Error Correction setting from the control panel.

a. Open the Setup Menu.

b. Open the Service menu.

c. Open the Fax Service menu.

d. Open the Error Correction menu.

e. Select the On setting.

●Check the toner cartridges and replace if necessary.

●Ask the sender to darken the contrast setting on the sending fax machine, and then resend the fax.

ENWW Solve fax problems 151

Fax cuts o or prints on two pages

●Set the Default Paper Size setting. Faxes print on a single size of paper based on the Default Paper Size

settings.

a. Open the Setup Menu.

b. Open the System Setup menu.

c. Open the Paper Setup menu.

d. Open the Default Paper Size menu.

e. Select the correct setting.

●Set the paper type and size for the tray used for faxes.

●Turn on the Fit to Page setting to print longer length faxes on letter or A4 size paper.

a. Open the Setup Menu.

b. Open the Fax Setup menu.

c. Open the Advanced Setup menu.

d. Open the Fit to Page menu.

e. Select the On setting.

NOTE: If the Fit to Page setting is o and the Default Paper Size setting is set to letter, a legal size original prints

on two pages.

152 Chapter 9 Solve problems ENWW

Index

accessories

ordering 28

part numbers 28

acoustic specications 12

AirPrint 44

Android devices

printing from 45

applications

downloading 82

Apps menu 82

bins, output

locating 3

browser requirements

HP Embedded Web Server 84

calibrate

colors 124

cartridge

replacing 30

checklist

fax troubleshooting 149

wireless connectivity 145

cleaning

glass 134, 139

paper path 120

color options

changing, Windows 124

color theme

changing, Windows 124

colors

calibrate 124

control panel

help 97

locating 3

control panel buttons

locating 5

copying

edges of documents 137

multiple copies 50

optimizing for text or pictures

136

setting paper size and type 135

single copies 50

two-sided documents 51

covers, locating 3

customer support

online 96

defaults, restoring 98

dimensions, printer 11

document feeder 51

copying two-sided documents

faxing from 78

jams 105

paper-feeding problems 101

double-sided copying 51

double-sided printing

Mac 39

Windows 37

drivers, supported 8

duplex 51

duplex printing

Mac 39

duplex printing (double-sided)

settings (Windows) 36

Windows 37

duplexer

jams 114

duplexing

manually (Mac) 39

manually (Windows) 37

EconoMode setting 90, 123

economy settings 90

electrical specications 12

electronic faxes

sending 79

Embedded Web Server (EWS)

assigning passwords 89

features 84

envelope

orientation 23

envelopes

loading in Tray 1 16

orientation 18

envelopes, loading 23

Explorer, versions supported

HP Embedded Web Server 84

factory-set defaults, restoring 98

fax

sending from software 79

solve general problems 150

speed dials 78

fax ports

locating 4

fax troubleshooting

checklist 149

faxing

from a computer (Windows) 79

from the document feeder 78

from the atbed scanner 77

fuser

jams 112

glass, cleaning 134, 139

ENWW Index 153

help, control panel 97

HP Customer Care 96

HP Device Toolbox, using 84

HP Embedded Web Server (EWS)

features 84

HP ePrint 43

HP ePrint software 44

HP EWS, using 84

HP Scan software (Windows) 54

HP Smart Software (macOS) 55

HP Web Jetadmin 92

HP Web Services

applications 82

enabling 82

image quality

check toner-cartridge status 120

image quality issues

examples and solutions 126

interface ports

locating 4

Internet Explorer, versions supported

HP Embedded Web Server 84

jams

document feeder 105

duplexer 114

fuser 112

locations 103

output bin 116

rear door 112

single-sheet priority feed slot

108

Tray 1 108

Tray 2 110

Jetadmin, HP Web 92

label

orientation 25

labels

printing on 25

labels, loading 25

paper in Tray 1 16

paper in Tray 2 19

Main input tray

loading envelopes 23

loading labels 25

maintenance kits

part numbers 29

manual duplex

Mac 39

Windows 37

memory

included 8

memory chip (toner)

locating 30

Microsoft Word, faxing from 79

mobile printing

Android devices 45

mobile printing solutions 8

mobile printing, software supported

multiple pages per sheet

printing (Mac) 40

printing (Windows) 37

Netscape Navigator, versions

supported

HP Embedded Web Server 84

network installation 83

network port

locating 4

networks

HP Web Jetadmin 92

installing the printer 83

supported 8

number of copies, changing 50

on/o button, locating 3

online help, control panel 97

online support 96

operating systems (OS)

supported 8

operating systems, supported 8

ordering

supplies and accessories 28

OS (operating system)

supported 8

output bin

clear jams 116

locating 3

pages per minute 8

pages per sheet

selecting (Mac) 40

selecting (Windows) 37

paper

loading Tray 1 16

loading Tray 2 19

selecting 121

Tray 1 orientation 18

Tray 2 orientation 21

paper jams

document feeder 105

duplexer 114

fuser 112

locations 103

output bin 116

rear door 112

single-sheet priority feed slot

108

Tray 1 108

Tray 2 110

paper pickup problems

solving 101

paper type

selecting (Windows) 38

paper types

selecting (Mac) 40

paper, ordering 28

part numbers

accessories 28

replacement parts 29

staple cartridges 29

supplies 28, 29

toner cartridge 29

toner cartridges 28

phone book, fax

adding entries 78

power

consumption 12

power connection

locating 4

power switch, locating 3

print drivers, supported 8

print media

loading in Tray 1 16

print on both sides

Mac 39

manually, Windows 37

Windows 37

154 Index ENWW

printing

from USB ash drives 46

printing on both sides

settings (Windows) 36

Priority input tray

loading envelopes 23

loading labels 25

product and serial number label

locating 4

rear door

jams 112

replacement parts

part numbers 29

replacing

toner cartridges 30

restoring factory-set defaults 98

scanner

faxing from 77

glass cleaning 134, 139

scanning

from HP Scan software

(Windows) 54

from HP Smart Software

(macOS) 55

sending faxes

from software 79

serial number label

locating 4

settings

factory-set defaults, restoring 98

shut down after delay

setting 90

single-sheet priority feed slot

jams 108

loading 16

paper orientation 18

sleep delay

setting 90

software

sending faxes 79

solve problems

fax 150

specications

electrical and acoustic 12

speed dials

programming 78

staple cartridges

part numbers 29

supplies

low threshold settings 99

ordering 28

part numbers 28, 29

replacing toner cartridges 30

using when low 99

support

online 96

system requirements

HP Embedded Web Server 84

minimum 10

technical support

online 96

toner cartridge

low threshold settings 99

part numbers 29

using when low 99

toner cartridges

components 30

part numbers 28

replacing 30

Tray 1

jams 108

loading 16

paper orientation 18

Tray 2

jams 110

loading 19

paper orientation 21

trays

capacity 8

included 8

locating 3

troubleshooting

check toner-cartridge status 120

faxes 149

network problems 143

paper feed problems 101

wired network 143

wireless network 145

two-sided copying 51

two-sided printing

settings (Windows) 36

USB ash drives

printing from 46

USB port

locating 4

walk-up USB port

locating 3

walk-up USB printing 46

web browser requirements

HP Embedded Web Server 84

Web Services

applications 82

enabling 82

Web sites

customer support 96

HP Web Jetadmin, downloading

weight, printer 11

Wi-Fi Direct Printing 41

Wi-Fi Direct printing 10

Windows

faxing from 79

wireless network

troubleshooting 145

wireless network interference 147

Word, faxing from 79

ENWW Index 155

156 Index ENWW

Table of Contents

HP Color LaserJet Pro M283fdw User Manual

Related Manuals