Table of Contents
Huawei AP4030DN User Manual
Displayed below is the user manual for AP4030DN by Huawei which is a product in the Wireless Access Points category. This manual has pages.
Related Manuals
AP4030DN
Product Description
Issue 01
Date 2015-03-10
HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://e.huawei.com
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
i
About This Document
Intended Audience
This document describes the positioning, characteristics, hardware structure, product features,
and technical specifications of the AP.
This document helps you understand the characteristics and features of the AP.
This document is intended for:
lNetwork planning engineers
lHardware installation engineers
lCommissioning engineer
lData configuration engineers
lOn-site maintenance engineers
lNetwork monitoring engineers
lSystem maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
Indicates an imminently hazardous situation
which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation
which, if not avoided, could result in death
or serious injury.
Indicates a potentially hazardous situation
which, if not avoided, may result in minor
or moderate injury.
AP4030DN
Product Description About This Document
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ii
Symbol Description
Indicates a potentially hazardous situation
which, if not avoided, could result in
equipment damage, data loss, performance
deterioration, or unanticipated results.
NOTICE is used to address practices not
related to personal injury.
NOTE
Calls attention to important information,
best practices and tips.
NOTE is used to address information not
related to personal injury, equipment
damage, and environment deterioration.
Change History
Changes between document issues are cumulative. The latest document issue contains all the
changes made in previous issues.
Changes in Issue 01 (2015-03-10)
This is the initial commercial release.
AP4030DN
Product Description About This Document
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iii
Contents
About This Document.....................................................................................................................ii
1 Product Positioning and Characteristics................................................................................... 1
1.1 Product Positioning.........................................................................................................................................................1
1.2 Product Characteristics................................................................................................................................................... 6
2 Hardware Structure....................................................................................................................... 9
2.1 AP4030DN..................................................................................................................................................................... 9
3 Product Features...........................................................................................................................12
3.1 WLAN Features............................................................................................................................................................12
3.2 Network Features..........................................................................................................................................................13
3.3 QoS Features.................................................................................................................................................................13
3.4 Security Features.......................................................................................................................................................... 13
3.5 Maintenance Features................................................................................................................................................... 14
3.6 BYOD...........................................................................................................................................................................14
3.7 Locating Service........................................................................................................................................................... 15
3.8 Spectrum Analysis........................................................................................................................................................15
4 Technical Specifications.............................................................................................................16
4.1 Basic Specifications......................................................................................................................................................16
4.2 Radio Specifications..................................................................................................................................................... 17
4.3 Standards Compliance.................................................................................................................................................. 21
AP4030DN
Product Description Contents
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iv
1 Product Positioning and Characteristics
1.1 Product Positioning
Table 1-1 Product positioning
Product
Model
Frequency
Band
IEEE
Standard
Compliance
Positioning Usage
Scenario
AP4030DN Dual band:
l2.4 GHz
l5 GHz
The AP4030DN
can provide
services
simultaneously
on the 2.4 GHz
and 5 GHz
frequency
bands to
support more
access users.
IEEE
802.11a/b/g/n/a
c
The cost-
effective
AP4030DN
supports 2 x 2
MIMO and
provides
comprehensive
service support
capabilities. It
is deployed
indoors and
features high
reliability, high
security, simple
network
deployment,
automatic AC
discovery and
configuration,
and real-time
management
and
maintenance.
Huawei
AP4030DN
complies with
IEEE 802.11ac
and can provide
The AP4030DN
provides
802.11n/ac
wireless access
networks for
places with
simple building
structure, small
size, dense
users, and high
capacity
demands, such
as small and
medium
enterprises and
branches.
The AP4030DN
can be flexibly
deployed and
work in both fit
AP and bridge
mode.
AP4030DN
Product Description 1 Product Positioning and Characteristics
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1
Product
Model
Frequency
Band
IEEE
Standard
Compliance
Positioning Usage
Scenario
gigabit access
for wireless
users. This high
capacity greatly
improves user
experience on
wireless
networks.
The AP4030DN can work as a Fat AP or Fit AP and switch flexibly between the two working
modes based on the network plan.
When the wireless network scale is small, customers need to purchase only AP products and
set the APs to work as Fat APs. As the network scale expands, tens of or hundreds of APs
exist on the network. To simplify network management, customers are advised to purchase
ACs to perform centralized management on the APs and set the APs to work as Fit APs.
Typical networking modes are as follows:
AP4030DN
Product Description 1 Product Positioning and Characteristics
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2
Figure 1-1 Fit AP networking (AP mode)
AP n
AP1
……
NMS
AC
Authentication system
Switch
Management channel between
NMS and AC
Management channel between the
AC and the AP and data channel
Where data flows are
encapsulated with CAPWAP
Channel where data flows are not
encapsulated with CAPWAP
Business
users
Residential
users
STA STA
In this networking, the AP functions as a fit AP. The AC is responsible for user access, AP
go-online, AP management, authentication, routing, security, and QoS.Huawei AC products
include the AC6605, AC6005, ACU2 (with S7700, S9700, or S12700), S5720HI, S7700 (with
X1E board), S9700 (with X1E board), and S12700 (with X1E board).
AP4030DN
Product Description 1 Product Positioning and Characteristics
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3
Figure 1-2 Fit AP networking (WDS mode: point-to-point)
Figure 1-3 Fit AP networking (WDS mode: point-to-multipoint)
In this networking, the AP connects two or more independently wired or wireless LANs
through wireless links to construct a network on which users can exchange data. In Wireless
Distribution System (WDS) mode, the AP supports point-to-point (P2P) and point-to-
multipoint (P2MP) networking modes. With 5 GHz and 2.4 GHz frequency bands, the AP can
implement wireless bridging and access functions.
AP4030DN
Product Description 1 Product Positioning and Characteristics
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4
Figure 1-4 Fit AP mesh networking
On the preceding network, APs function as mesh points (MPs) and are fully-meshed to
establish an auto-configured and self-healing wireless mesh network (WMN). APs with the
gateway function can work as the mesh portal points (MPPs) through which the WMN can
provide access to the Internet. Terminals connect to APs to access the WMN. The WMN uses
dedicated mesh routing protocols to guarantee high transmission quality and is more
applicable to scenarios that require high bandwidth and highly stable Internet connections.
AP4030DN
Product Description 1 Product Positioning and Characteristics
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5
Figure 1-5 Fat AP networking
AP n
AP1
……
Switch
STA STASTA STA
On the preceding network, the device functions as a Fat AP to implement functions such as
user access, authentication, data security, service forwarding, and QoS.
1.2 Product Characteristics
The AP4030DN has the following advantages on a WLAN.
Product
Characteristics
Description
High-speed and
reliable wireless
access
lCompatibility with IEEE 802.11a/b/g/n/ac
l2 x 2 MIMO and a maximum rate of 1.16 Gbit/s
lLink aggregation of dual Ethernet ports
lSupports Wi-Fi Multimedia (WMM) and priority mapping on the
air interface and wired interface.
lSupports wired link integrity check.
lSupports load balancing.
lSupports roaming without service interruption in Fit AP mode.
lSupports AC dual-link backup in Fit AP mode.
lLatest 802.11ac chip with higher performance and wider coverage
lSupports airtime scheduling which ensures fairness in channel
occupation time for all users.
AP4030DN
Product Description 1 Product Positioning and Characteristics
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6
Product
Characteristics
Description
Comprehensive
user access control
capability
lSupports access control lists (ACLs) and implements user access
control based on the user group policy.
lProvides fine-grained bandwidth management for each user.
lSupports user isolation policies.
lSupports unified authentication on the AC in Fit AP mode.
lIdentifies the device type according to the organizationally unique
identifier (OUI) in the MAC address, user agent (UA) information
in an HTTP packet, and DHCP options in Fit AP mode.
lThe RADIUS server delivers packet forwarding, security, and
QoS policies according to the device type carried in the RADIUS
authentication and accounting packets in Fit AP mode.
High network
security
lOpen system authentication
lWEP authentication/encryption
lWPA/WPA2-PSK authentication and encryption
lWPA/WPA2-802.1x authentication and encryption
lWAPI authentication and encryption
lSupports wireless intrusion detection system (WIDS) and wireless
intrusion prevention system (WIPS), including rogue device
detection and countermeasure, attack detection and dynamic
blacklist, STA/AP blacklist and whitelist.
Flexible
networking and
environment
adaptability
lProvides flexible networking capabilities and applies to various
application scenarios. Mesh and WDS scenarios are supported
only in Fit AP mode.
lHas strong environment adaptability. The AP can automatically
select the transmission rates, channels, and transmit power to
adapt to various radio environments and avoid interference in real
time.
lAdjusts bandwidth allocation based on the user quantity and
environment to improve user experience.
lIdentifies interference sources such as baby monitors, Bluetooth
devices, digital cordless phones (at 2.4 GHz frequency band only),
wireless audio transmitters (at both the 2.4 GHz and 5 GHz
frequency bands), wireless game controllers, and microwaves in
Fit AP mode and works with eSight to locate interference sources
and display spectrums.
AP4030DN
Product Description 1 Product Positioning and Characteristics
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7
Product
Characteristics
Description
Easy device
management and
maintenance
lAutomatically goes online and loads the configuration, and
supports plug-and-play (PnP) in Fit AP mode.
lSupports batch upgrade.
lManages APs locally on the web platform and supports HTTP or
HTTPS login, configuration, and maintenance in Fat AP mode.
lAllows real-time monitoring on the network management system
(NMS) to facilitate remote configuration and fast fault location.
lSupports the Link Layer Discovery Protocol (LLDP) to implement
automatic link discovery and obtain the network topology.
AP4030DN
Product Description 1 Product Positioning and Characteristics
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8
2 Hardware Structure
2.1 AP4030DN
Appearance
Figure 2-1 shows the appearance of the AP.
NOTE
The actual device appearance may be different from the following device appearance, but these
differences will not affect device functions.
Figure 2-1 AP4030DN appearance
Port
The following figure shows ports on the AP4030DN.
AP4030DN
Product Description 2 Hardware Structure
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9
Figure 2-2 AP4030DN ports
As shown in Figure 2-2, each port can be described as follows:
l1. Input port for 12 V DC power supply
l2. Default button: restores factory settings if you hold down the button more than 3
seconds.
l4. GE/PoE: 10/100/1000M port used to connect to the wired Ethernet. The port can
connect to a PoE power supply to provide power for APs.
l5. Console port: connects to the maintenance terminal for AP configuration and
management.
l6. Lock port: protects the AP against theft.
LED Indicators
NOTE
Indicator colors may vary slightly at different temperature.
Type Color Status Description
Default
status after
power-on
Green Steady on The AP is just powered on and the software is not
started yet.
Software
startup
status
Green Steady on
after
blinking
once
After the system is reset and starts uploading the
software, the indicator blinks green once. Until the
software is uploaded and started, the indicator
remains steady green.
Running
status
Green Blinking
once every
2s (0.5
Hz)
lThe system is running properly, the Ethernet
connection is normal, and STAs are associated
with the AP.
lThe system enters the Uboot CLI.
Blinking
once every
5s (0.2
Hz)
The system is running properly, the Ethernet
connection is normal, and no STA is associated
with the AP. The system is in low power
consumption state.
AP4030DN
Product Description 2 Hardware Structure
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10
Type Color Status Description
Alarm Green Blinking
once every
0.25s (4
Hz)
lThe software is being upgraded.
lAfter the software is uploaded and started, the
AP working in Fit AP mode requests to go
online on the AC and maintains this state until
it goes online successfully on the AC (before
the CAPWAP link is established).
lThe AP working in Fit AP mode fails to go
online on the AC (the CAPWAP link
disconnects).
Fault Red Steady on A fault that affects services has occurred, such as a
DRAM detection failure or system software
loading failure. The fault cannot be automatically
rectified and must be rectified manually.
AP4030DN
Product Description 2 Hardware Structure
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11
3 Product Features
3.1 WLAN Features
WLAN features supported by the AP are as follows:
lComply with IEEE 802.11a/b/g/n/ac
lThe maximum rate of 1.16Gbit/s
lMaximum ratio combining (MRC)
lSpace time block code (STBC)
lLow-density parity-check (LDPC)
lMaximum-likelihood detection (MLD)
lFrame aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx only)
l802.11 dynamic frequency selection (DFS)
lShort GI in 20 MHz, 40 MHz and 80 MHz modes
lPriority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to
implement priority-based data processing and forwarding
lAutomatic and manual rate adjustment
lWLAN channel management and channel rate adjustment
NOTE
For details about WLAN channel management, see the Country Code & Channel Compliance
Table.
lAutomatic channel scanning and interference avoidance
lService set identifier (SSID) hiding
lSignal sustain technology (SST)
lUnscheduled automatic power save delivery (U-APSD)
lControl and Provisioning of Wireless Access Points (CAPWAP) in Fit AP mode
lAutomatic login in Fit AP mode
lExtended Service Set (ESS) in Fit AP mode
lWireless distribution system (WDS) in Fit AP mode
lMesh networking in Fit AP mode
lMulti-user CAC
AP4030DN
Product Description 3 Product Features
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12
3.2 Network Features
Network features supported by the AP are as follows:
lCompliance with IEEE 802.3u
lAuto-negotiation of the rate and duplex mode and automatic switchover between the
Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X)
lCompliance with IEEE 802.1q
lSSID-based VLAN assignment
lVLAN trunk on uplink Ethernet ports
lAP control channel in tagged and untagged mode
lDHCP client, obtaining IP addresses through DHCP
lTunnel data forwarding and direct data forwarding
lSTA isolation in the same VLAN
lAccess control lists (ACLs)
lLink Layer Discovery Protocol (LLDP)
lUninterrupted service forwarding upon CAPWAP channel disconnection in Fit AP mode
lUnified authentication on the AC in Fit AP mode
lAC dual-link backup in Fit AP mode
lNAT in Fat AP mode
lIPv6 in Fit AP mode
3.3 QoS Features
QoS features supported by the AP are as follows:
lPriority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to
implement priority-based data processing and forwarding
lWMM parameter management for each radio
lWMM power saving
lPriority mapping for upstream packets and flow-based mapping for downstream packets
lQueue mapping and scheduling
lUser-based bandwidth limiting
lAdaptive bandwidth management (the system dynamically adjusts bandwidth based on
the number of users and radio environment to improve user experience)
lAirtime scheduling
3.4 Security Features
Security features supported by the AP are as follows:
lOpen system authentication
lWEP authentication/encryption using a 64-bit, 128-bit, or 152-bit encryption key
AP4030DN
Product Description 3 Product Features
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13
lWPA/WPA2-PSK authentication and encryption (WPA/WPA2 personal edition)
lWPA/WPA2-802.1x authentication and encryption (WPA/WPA2 enterprise edition)
lWPA-WPA2 hybrid authentication
lWAPI authentication and encryption
lSupports wireless intrusion detection system (WIDS) and wireless intrusion prevention
system (WIPS), including rogue device detection and countermeasure, attack detection
and dynamic blacklist, STA/AP blacklist and whitelist.
l802.1x authentication, MAC address authentication, and Portal authentication
lDHCP Snooping
lDAI (Dynamic ARP Inspection)
lIPSG (IP Source Guard)
3.5 Maintenance Features
Maintenance features supported by the AP are as follows:
lUnified management and maintenance on the AC in Fit AP mode
lAutomatic login and configuration loading, and plug-and-play (PnP) in Fit AP mode
lWDS zero-configuration deployment in Fit AP mode
lMesh network zero-configuration deployment in Fit AP mode
lBatch upgrade in Fit AP mode
lTelnet
lSTelnet using SSH v2
lSFTP using SSH v2
lLocal AP management through the serial interface
lWeb local AP management through HTTP or HTTPS in Fat AP mode
lReal-time configuration monitoring and fast fault location using the NMS
lSNMP v1/v2/v3 in Fat AP mode
lSystem status alarm
lNetwork Time Protocol (NTP) in Fat AP mode
3.6 BYOD
NOTE
The AP supports bring your own device (BYOD) only in Fit AP mode.
BYOD features supported by the AP are as follows:
lIdentifies the device type according to the organizationally unique identifier (OUI) in the
MAC address.
lIdentifies the device type according to the user agent (UA) information in an HTTP
packet.
lIdentifies the device type according to DHCP options.
lThe RADIUS server delivers packet forwarding, security, and QoS policies according to
the device type carried in the RADIUS authentication and accounting packets.
AP4030DN
Product Description 3 Product Features
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14
3.7 Locating Service
NOTE
The AP supports the locating service only in Fit AP mode.
Locating service features supported by the AP are as follows:
lLocates tags manufactured by AeroScout or Ekahau.
lLocates Wi-Fi terminals.
lWorks with eSight to locate rogue devices.
3.8 Spectrum Analysis
NOTE
The AP supports spectrum analysis only in Fit AP mode.
Spectrum analysis features supported by the AP are as follows:
lIdentifies interference sources such as baby monitors, Bluetooth devices, digital cordless
phones (at 2.4 GHz frequency band only), wireless audio transmitters (at both the 2.4
GHz and 5 GHz frequency bands), wireless game controllers, and microwaves.
lWorks with eSight to perform spectrum analysis on interference sources.
AP4030DN
Product Description 3 Product Features
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15
4 Technical Specifications
4.1 Basic Specifications
Table 4-1 Basic specifications of the AP4030DN
Item Description
Technical specifications Dimensions (H x W x D) 39.5mm x 180mm x 180mm
Weight 0.4kg
System memory l256MB DDR2
l32MB Flash
Power specifications Power input lDC 12V±10%
lPoE power: in
compliance with IEEE
802.3af/at
Maximum power
consumption
10.2W
NOTE
The actual maximum power
consumption depends on local
laws and regulations.
Environment specifications Operating temperature -60 m to +1800 m: -10°C to
+50°C
1800 m to 5000 m:
Temperature decreases by
1°C every time the altitude
increases 300 m.
Storage temperature -40°C to +70°C
Operating humidity 5% to 95% (non-
condensing)
Ingress Protection Rating IP41
AP4030DN
Product Description 4 Technical Specifications
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
16
Item Description
Atmospheric pressure 70kPa to 106kPa
4.2 Radio Specifications
Table 4-2 Radio specifications
Item Description
Antenna
type
Built-in antenna
Antenna
gain
l2.4G: 4dBi
l5G: 6dBi
Maximum
number of
concurrent
users
lFIT AP: ≤ 256
lFAT AP: ≤ 64
Maximum
number of
VAPs for
each radio
16
Maximum
transmit
power
l2.4 GHz: 23 dBm (combined power)
l5 GHz: 23 dBm (combined power)
NOTE
The actual transmit power depends on local laws and regulations.
You can adjust the transmit power from the maximum transmit power to 1 dBm, with
a step of 1 dB.
Maximum
number of
non-
overlapping
channels
2.4 GHz
802.11b/g
l20 MHz: 3
802.11n
l20 MHz: 3
l40 MHz: 1
5 GHz
l802.11a
–20 MHz:
13
l802.11n
–20 MHz:
13
–40 MHz:
6
l802.11ac
–20MHz:
13
–40MHz: 6
–80MHz: 3
NOTE
The table uses the number of non-
overlapping channels supported by
China as an example. The number of
non-overlapping channels varies in
different countries. For details, see the
Country Code & Channels compliance
status
AP4030DN
Product Description 4 Technical Specifications
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
17
Item Description
Channel rate
supported
l802.11b: 1, 2, 5.5, and 11 Mbit/s
l802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s
l802.11n: 6.5 to 300 Mbit/s
l802.11ac: 6.5 to 867 Mbit/s
Receiver
sensitivity
(Typical
values)
2.4 GHz
l-101 dBm @
1 Mbit/s
l-96 dBm @ 2
Mbit/s
l-94 dBm @
5.5 Mbit/s
l-89 dBm @
11 Mbit/s
2.4 GHz
802.11g (non-
HT20)
l-95 dBm @ 6
Mbit/s
l-95 dBm @ 9
Mbit/s
l-93 dBm @
12 Mbit/s
l-91 dBm @
18 Mbit/s
l-87 dBm @
24 Mbit/s
l-84 dBm @
36 Mbit/s
l-80 dBm @
48 Mbit/s
l-79 dBm @
54 Mbit/s
2.4 GHz
802.11n (HT20)
l-93 dBm @
MCS0
l-93 dBm @
MCS1
l-91 dBm @
MCS2
l-86 dBm @
MCS3
l-83 dBm @
MCS4
l-78 dBm @
MCS5
l-77 dBm @
MCS6
l-75 dBm @
MCS7
l-91 dBm @
MCS8
l-91 dBm @
MCS9
l-89 dBm @
MCS10
l-84 dBm @
MCS11
l-81 dBm @
MCS12
l-76 dBm @
MCS13
l-75 dBm @
MCS14
l-73 dBm @
MCS15
2.4 GHz
802.11n(HT40)
l-90 dBm @
MCS0
l-90 dBm @
MCS1
l-88 dBm @
MCS2
l-84 dBm @
MCS3
l-81 dBm @
MCS4
l-76 dBm @
MCS5
l-75 dBm @
MCS6
l-73 dBm @
MCS7
l-88 dBm @
MCS8
l-88 dBm @
MCS9
l-86 dBm @
MCS10
l-82 dBm @
MCS11
l-79 dBm @
MCS12
l-74 dBm @
MCS13
l-73 dBm @
MCS14
l-71 dBm @
MCS15
AP4030DN
Product Description 4 Technical Specifications
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
18
Item Description
5 GHz
802.11a (non-
HT20)
l-95 dBm @ 6
Mbit/s
l-93 dBm @ 9
Mbit/s
l-92 dBm @
12 Mbit/s
l-90 dBm @
18 Mbit/s
l-87 dBm @
24 Mbit/s
l-84 dBm @
36 Mbit/s
l-80 dBm @
48 Mbit/s
l-78 dBm @
54 Mbit/s
5 GHz
802.11n (HT20)
l-95 dBm @
MCS0
l-93 dBm @
MCS1
l-90 dBm @
MCS2
l-86 dBm @
MCS3
l-82 dBm @
MCS4
l-79 dBm @
MCS5
l-77 dBm @
MCS6
l-75 dBm @
MCS7
l-93 dBm @
MCS8
l-91 dBm @
MCS9
l-88 dBm @
MCS10
l-84 dBm @
MCS11
l-80 dBm @
MCS12
l-77 dBm @
MCS13
l-75 dBm @
MCS14
l-73 dBm @
MCS15
5 GHz
802.11n (HT40)
l-92 dBm @
MCS0
l-90 dBm @
MCS1
l-87 dBm @
MCS2
l-84 dBm @
MCS3
l-80 dBm @
MCS4
l-76 dBm @
MCS5
l-75 dBm @
MCS6
l-73 dBm @
MCS7
l-90 dBm @
MCS8
l-88 dBm @
MCS9
l-85 dBm @
MCS10
l-82 dBm @
MCS11
l-78 dBm @
MCS12
l-74 dBm @
MCS13
l-73 dBm @
MCS14
l-71 dBm @
MCS15
-
AP4030DN
Product Description 4 Technical Specifications
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
19
Item Description
5 GHz
802.11ac
(VTH20)
l-95 dBm @
MCS0NSS1
l-93 dBm @
MCS1NSS1
l-90 dBm @
MCS2NSS1
l-86 dBm @
MCS3NSS1
l-83 dBm @
MCS4NSS1
l-78 dBm @
MCS5NSS1
l-77 dBm @
MCS6NSS1
l-75 dBm @
MCS7NSS1
l-72 dBm @
MCS8NSS1
l-93 dBm @
MCS0NSS2
l-91 dBm @
MCS1NSS2
l-88 dBm @
MCS2NSS2
l-84 dBm @
MCS3NSS2
l-81 dBm @
MCS4NSS2
l-76 dBm @
MCS5NSS2
l-75 dBm @
MCS6NSS2
l-73 dBm @
MCS7NSS2
l-70 dBm @
MCS8NSS2
5 GHz
802.11ac
(VTH40)
l-92 dBm @
MCS0NSS1
l-90 dBm @
MCS1NSS1
l-87 dBm @
MCS2NSS1
l-83 dBm @
MCS3NSS1
l-80 dBm @
MCS4NSS1
l-76 dBm @
MCS5NSS1
l-74 dBm @
MCS6NSS1
l-73 dBm @
MCS7NSS1
l-68 dBm @
MCS8NSS1
l-67 dBm @
MCS9NSS1
l-90 dBm @
MCS0NSS2
l-88 dBm @
MCS1NSS2
l-85 dBm @
MCS2NSS2
l-81 dBm @
MCS3NSS2
l-78 dBm @
MCS4NSS2
l-74 dBm @
MCS5NSS2
l-72 dBm @
MCS6NSS2
l-71 dBm @
MCS7NSS2
l-65 dBm @
MCS8NSS2
l-64 dBm @
MCS9NSS2
5 GHz
802.11ac
(VTH80)
l-87 dBm @
MCS0NSS1
l-87 dBm @
MCS1NSS1
l-81 dBm @
MCS2NSS1
l-79 dBm @
MCS3NSS1
l-75 dBm @
MCS4NSS1
l-73 dBm @
MCS5NSS1
l-70 dBm @
MCS6NSS1
l-68 dBm @
MCS7NSS1
l-65 dBm @
MCS8NSS1
l-62 dBm @
MCS9NSS1
l-85 dBm @
MCS0NSS2
l-85 dBm @
MCS1NSS2
l-79 dBm @
MCS2NSS2
l-77 dBm @
MCS3NSS2
l-73 dBm @
MCS4NSS2
l-71 dBm @
MCS5NSS2
l-68 dBm @
MCS6NSS2
l-66 dBm @
MCS7NSS2
l-62 dBm @
MCS8NSS2
l-59 dBm @
MCS9NSS2
-
AP4030DN
Product Description 4 Technical Specifications
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
20
4.3 Standards Compliance
Safety standards
lUL 60950–1
lCAN/CSA 22.2 No.60950-1
lIEC 60950–1
lEN 60950–1
lGB 4943
Radio standards
lETSI EN 300 328
lETSI EN 301 893
lRSS-210
lAS/NZS 4268
EMC standards
lEN 301 489–1
lEN 301 489–17
lETSI EN 60601-1-2
lFCC Part 15
lICES-003
lYD/T 1312.2-2004
lITU k.20
lGB 9254
lGB 17625.1
lAS/NZS CISPR22
lEN 55022
lEN 55024
lCISPR 22
lCISPR 24
lIEC61000-4-6
lIEC61000-4-2
IEEE standards
lIEEE 802.11a/b/g
lIEEE 802.11n
lIEEE 802.11ac
lIEEE 802.11h
AP4030DN
Product Description 4 Technical Specifications
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
21
lIEEE 802.11d
lIEEE 802.11e
Security standards
l802.11i, Wi-Fi Protected Access 2 (WPA2), and WPA
l802.1X
lAdvanced Encryption Standards (AES) and Temporal Key Integrity Protocol (TKIP)
lEAP Type (s)
Environment standards
lETSI 300 019-2-1
lETSI 300 019-2-2
lETSI 300 019-2-3
lETSI 300 019-1-1
lETSI 300 019-1-2
lETSI 300 019-1-3
EMF
lCENELEC EN 62311
lCENELEC EN 50385
lOET65
lRSS-102
lFCC Part1&2
lFCC KDB
RoHS
lDirective 2002/95/EC & 2011/65/EU
Reach
lRegulation 1907/2006/EC
WEEE
lDirective 2002/96/EC & 2012/19/EU
AP4030DN
Product Description 4 Technical Specifications
Issue 01 (2015-03-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
22