Table of Contents
- LICENSE
- SAFETY INSTRUCTIONS
- PREPARATION
- REMOTE CONTROL
- USING THE PROJECTOR
- ENTERTAINMENT
- MY MEDIA
- 3D FUNCTION
- CUSTOMIZING SETTINGS
- CONNECTING DEVICES
- MAINTENANCE
- SPECIFICATIONS
LG PH550 User Manual
Displayed below is the user manual for PH550 by LG which is a product in the Data Projectors category. This manual has pages.
Related Manuals
2LICENSE
LICENSE
Supported licenses may differ by model. For more information about
licenses, visit www.lg.com.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
This DivX Certied® device has passed rigorous
testing to ensure it plays DivX® video.
To play purchased DivX movies, rst register your
device at vod.divx.com. Find your registration
code in the DivX VOD section of your device setup
menu.
DivX Certied® to play DivX® video up to HD 1080p,
including premium content.
DivX®, DivX Certied® and associated logos are
trademarks of DivX, LLC and are used under
license.
Covered by DivX Patents 7,295,673; 7,515,710;
RE45,052; and others available
at [www.divx.com/patents]
The terms HDMI and HDMI High-Denition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
This device meets the EMC requirements for home appliances (Class
B) and is intended for home usage. This device can be used in all
regions.
• Image shown may differ from your projector.
• Your projector’s OSD (On Screen Display) may differ slightly from
that shown in this manual.
NOTE
3
SAFETYINSTRUCTIONS
SAFETYINSTRUCTIONS
Please take note of the safety instructions to prevent any potential accident
or misuse of the projector.
• Safety precautions are given in two forms, i.e. WARNING and CAUTION
as detailed below.
WARNING Failure to follow the instructions may cause serious
injury and even death.
CAUTION Failure to follow the instructions may cause injury to
persons or damage to the product.
• Read the owner’s manual carefully and keep it on hand.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning ash with
arrowhead symbol,
within an equilateral
triangle, is intended to alert the
user to the presence of
uninsulated dangerous voltage
within the product’s enclosure
that may be of sufcient
magnitude to constitute a risk
of electric shock to persons.
The exclamation point
within an equilateral
triangle is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the device.
WARNING/CAUTION
– TO REDUCE THE RISK
OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR
MOISTURE.
Readtheseinstructions.
Keeptheseinstructions.
Heedallwarnings.
Followallinstructions.
IndoorInstallation
WARNING
• Do not use the projector outside
and do not expose the product
to any humidity or water.
– Since the product is not
waterproof, this may result in
a re or electric shock.
• Do not place the projector in
direct sunlight or near heat
sources such as radiators, fires,
stoves, etc.
– This may result in re.
• Do not place flammable
materials such as aerosols near
the projector.
– This may result in re.
4SAFETYINSTRUCTIONS
• Do not allow children to cling to
or climb up to the projector.
– This may cause the projector
to fall, causing injury or
death.
• Do not install the product in a
place with no ventilation (e.g.,
on a bookshelf or in a closet) or
on a carpet or cushion.
– This may result in re due
to the increase in internal
temperature.
• Do not place the product close
to sources of steam, oil or oil
mist, such as humidifiers and
kitchen counters.
– Failure to do so may result
in re, electric shock, or
corrosion.
• Do not install the product onto
a wall or ceiling that is close to
sources of oil or oil mist.
– The product may be
damaged and fall, resulting in
serious injury.
• Do not place the projector where
it might be exposed to dust.
– This may result in re.
• Do not use the projector in a
damp place such as a bathroom
where it is likely to get wet.
– This may result in re or
electric shock.
• Do not allow a tablecloth or
curtain to block the air vent.
– This may result in re due to
the increase in the internal
temperature.
• Ensure good ventilation around
the projector. The distance
between the projector and the
wall should be at least 30 cm.
– This will prevent re due to
the increase in the internal
temperature.
CAUTION
• When placing the projector on a
table or shelf, be careful not to
put it near the edge.
– The projector could fall due
to balance problems, which
may cause personal injury or
damage to the product. Make
sure to use the projector
cabinet or stand that ts the
projector.
• When moving the projector,
make sure to switch it off and
remove the power plug and
cords.
– The power cord may be
damaged, resulting in re or
electric shock.
• Do not place the projector on
an unstable or vibrating surface
such as a wobbly shelf or a
slope.
– It may fall and cause injury.
• Be careful not to tip the projector
over when connecting external
devices to the projector.
– This may cause personal
injury or damage to the
projector.
5
SAFETYINSTRUCTIONS
Power
WARNING
• DISCONNECTING THE
DEVICE FROM THE MAIN
POWER
– The Power plug is the
disconnecting device. In case
of an emergency, the Power
Plug must remain readily
accessible.
• The grounding wire should be
connected. (Except for devices
which are not grounded.)
– Ensure that you connect the
grounding cable to avoid
electric shock.
If it is not possible to ground
the unit, have a qualied
electrician install a separate
circuit breaker.
Do not try to ground the
projector by connecting it to
telephone wires, lightning
rods, or gas pipes.
• The power plug should be
inserted fully into the power
outlet.
– An unstable connection may
cause a re.
• Do not place heavy objects on
the power cord.
– This may result in re or
electric shock.
• Never touch the power plug with
wet hands.
– This may result in electric
shock.
• Do not plug too many devices
into one multi-power outlet.
– This may result in re due to
the power outlet overheating.
• Keep the AC adapter, power
plug, and the used power outlet
clean from dust or foreign
materials building up.
– This may result in re.
• If there is any smoke or a
burning smell from the projector
or AC adapter, stop using the
product immediately. Disconnect
the power cord from the power
outlet, and then contact the
customer service center.
– This may result in re.
• To turn off the main power,
remove the power plug, which
should be positioned so it is
easy to access for operation.
6SAFETYINSTRUCTIONS
CAUTION
• Always grab the plug to remove
the AC adapter or power cord.
– Otherwise, this may result
in a re or may damage the
product.
• Refrain from constantly bending
the power cord of the AC
adapter.
– If the power cord is bent
excessively for a long period
of time, the cord may break
inside. This may result in a
re or electric shock.
• Ensure the power cord and plug
are not damaged, modified,
severely bent, twisted, pulled,
sandwiched or hot. Do not use
the product if the power outlet
is loose.
– This may result in re or
electric shock.
• Keep the power cord away from
heating devices.
– The wire’s sheath may melt,
which may result in re or
electric shock.
• Place the projector where
people will not trip over or step
on the power cord to protect the
power cord and plug from any
damage.
– This may result in re or
electric shock.
• Do not turn the projector on or
off by plugging in the power plug
or unplugging it from the power
outlet.
(Do not use the power plug as
a switch.)
– This may result in electric
shock or damage to the
product.
• Do not insert a conductor into
the other side of the wall outlet
while the power plug is inserted
into the wall outlet.
In addition, do not touch the
power plug immediately after it
is disconnected from the wall
outlet.
– This may result in electric
shock.
• Only use the official power cord
provided by LG Electronics. Do
not use other power cords.
– This may result in re or
electric shock.
• If any water or foreign materials
have gone into the AC adapter,
power cord, or the interior of the
projector, turn off the projector
by pressing the power button.
Remove all the cables, and then
contact the customer service
center.
– This may result in re or
electric shock.
• The surface of the AC adapter is
hot. Keep the AC adapter out of
the reach of children and avoid
touching it during use.
7
SAFETYINSTRUCTIONS
• Never disassemble the power
supply devices (AC adapter/
power cord, etc.).
– This may damage the power
cord and result in a re or
electric shock.
• Connect the AC adapter and the
power cord firmly.
– Not doing so may result in a
product failure or re.
• Do not place heavy objects
or put pressure on the power
cord and AC adapter and avoid
damage.
– This may result in a re or
may damage the product.
• Always use the AC adapter
provided or any AC adapters
approved and certified by LG
Electronics.
– Any other AC adapter
connected may result in the
screen ickering.
WheninUse
WARNING
• Do not place anything
containing liquid on top of the
projector such as a vase, flower
pot, cup, cosmetics, medicine,
or ornaments, candles, etc.
– This may result in re or
electric shock, or cause injury
due to falling.
• In the event that there is a
heavy impact or the cabinet is
damaged, switch it off, unplug
it from the power outlet and
contact an authorized service
center.
– This may result in electric
shock.
• Do not insert pieces of metal
such as coins, hairpins, or metal
debris, nor flammable materials
such as paper or matches into
the projector.
– This is to prevent electric
shock or re.
• Make sure that a child does
not swallow the batteries when
you replace the old remote
control batteries with new ones.
Keep batteries out of reach of
children.
– If a child swallows a battery,
consult a doctor immediately.
• Never open any cover on the
projector.
– There is a high risk of electric
shock.
8SAFETYINSTRUCTIONS
• Do not look directly into the lens
when the projector is in use.
– The bright light may damage
your eyes.
• When the lamp is on or has just
been turned off, avoid touching
the air vent or lamp, because
these will be very hot.
• If there is a gas leak in the
room with the projector, do not
touch the projector or power
outlet. Open the windows for
ventilation.
– Sparks may cause re or
burns.
• Unplug the power cord from the
outlet during a lightning storm.
– This will prevent shock or
damage to the projector.
• Do not use the projector near
electronic devices that generate
a strong magnetic field.
• Keep the plastic film used for
packaging the projector out of
the reach of children.
– If not handled safely, it can
cause suffocation.
• Do not keep your hand on the
projector for a long time when it
is running.
• When you play a game by
connecting a game console to
a projector, it is recommended
that you maintain a distance
of more than four times the
diagonal length of the screen.
– Make sure that the
connecting cable is long
enough. Otherwise, the
product may fall causing
personal injury or damage to
the product.
• Do not place the projector or its
remote control with battery in
an extremely high temperature
environment.
– This may result in re.
• Do not use 3D glasses if you do
not watch 3D.
CAUTION
• Do not place heavy objects on
the projector.
– It may fall down and cause
personal injury.
• Be careful not to allow any
impact to the lens during
transport.
• Do not touch the lens of the
projector.
– The lens may be damaged.
• Do not use any sharp tools on
the projector such as a knife
or hammer, because this may
damage the casing.
• In the event that no image
appears on the screen or no
sound is heard, stop using
the projector. Switch off the
projector, unplug it from the
power outlet, and contact our
service center.
– This may result in re or
electric shock.
• Do not drop anything onto the
projector or allow anything to
bang into the projector.
– This may cause damage
to the projector or personal
injury.
9
SAFETYINSTRUCTIONS
• It is recommended that you
maintain a distance of more
than 5 to 7 times the diagonal
length of the screen.
– If you watch the screen at
a close distance for a long
time, your eye sight may
become worse.
• Do not block the light beam
emitted from the projector using
a book or other object.
– Lengthy exposure to the
projector beam may result in
re. In addition, the lens may
be overheated and damaged
by the reected heat.
• Do not start the projector with
the volume turned up high.
– High volume may damage
hearing.
• Do not use high voltage
electrical equipment near the
projector, (e.g., a bug zapper).
This may result in product
malfunction.
Cleaning
WARNING
• Do not spray the projector with
water when cleaning. Make sure
water does not flow into the
projector.
– This may result in re or
electric shock.
• When there is smoke or a
strange smell coming out from
the projector or a foreign object
falls into the pro jector, switch it
off and unplug it from the power
outlet and contact our service
center.
– Otherwise, this may result in
re or electric shock.
• Use air spray, a soft cloth, or
a cotton swab moistened with
a lens cleaning chemical or
alcohol to remove dust or stains
on the front projection lens.
10 SAFETYINSTRUCTIONS
CAUTION
• Contact your seller or our
service center once a year to
clean the internal parts of the
projector.
– If you do not clean the
projector for a long period of
time, dust will accumulate,
which may result in re or
damage to the projector.
• When cleaning plastic parts
such as the projector case,
unplug the power first and wipe
with a soft cloth. Do not spray
with water or wipe with a wet
cloth. Never use glass cleaner,
automobile or industrial polish,
abrasives, wax, benzene, or
alcohol as these can damage
the projector.
– This can result in re, electric
shock, or cause damage to
the product (deformation and
corrosion).
• Remove the plug from the outlet
before cleaning the product.
– Otherwise, this may result in
electric shock.
Others
WARNING
• Some users may experience
a seizure or other abnormal
symptoms when they are
exposed to a flashing light or
particular patterns from a video
game.
• When you go out, place the
projector out of reach of
animals, and remove the power
plug from the wall outlet.
– Using a damaged power cord
may result in short circuit
or re.
• Do not use the projector near
high-precision electronic devices
or those that transmit weak
radio signal.
– This may affect the operation
of the product, causing an
accident.
• Only a qualified technician
can disassemble or modify
the projector. For diagnosis,
adjustment, or repair, contact
your seller or our service center.
– This may result in re or
electric shock.
• Proper ventilation required, do
not block airflow around unit.
Doing so can cause injury and
internal overheating.
11
SAFETYINSTRUCTIONS
• To prevent damage to lamp,
unit must remain plugged in for
approximately 3 minutes after
power down to allow for proper
cool down (not applicable on
LED models).
• Do not touch the lens; doing so
can result in burns or damage
to lens. Lens and unit may be
HOT during and immediately
after use. Use caution when
handling unit, allowing for proper
cool down.
• Only use a grounded electrical
outlet. (Except for devices which
are not grounded.)
• Do not insert anything into or
cover up the exhaust vents.
– This may result in re or
electric shock.
• Follow all maintenance
guidelines for optimal use;
service only at an authorized
service center.
• Lamp contains mercury and
as such must be disposed of
according to local, state, and
federal laws (not applicable on
LED models).
• Keep the batteries and remote
out of reach of children.
– This will prevent personal
injury or damage to the
product.
CAUTION
• Do not use or store the projector
outdoors for long periods of
time.
• Do not mix new batteries with
old ones.
– Burst or leaking batteries
may result in damage or
injury.
• Be sure to unplug if the projector
is not to be used for a long
period.
– Accumulated dust may result
in re or electric shock due to
overheating, ignition, or poor
insulation.
• Only use the specified type of
battery.
– Burst or leaking batteries
may result in damage or
injury.
• Make sure you use the same
type of battery when replacing.
– In the case of a battery
contact failure, the battery
may drain quickly or the
remote control may not work
properly.
• Dispose of used batteries
properly.
– This may result in explosion
or re. The correct method of
disposal may vary depending
on your country or region.
Dispose of the battery pack
as instructed.
12 SAFETYINSTRUCTIONS
• Do not throw or disassemble the
battery.
– This may result in re or
explosion due to damage to
the battery.
• Store batteries away from
metallic objects, such as keys
and paper clips.
– Excess current may
cause a rapid increase in
temperature, resulting in re
or burns.
• Do not store the batteries near
any heat source, such as a
heater.
– This may result in re or
damage to the product.
• Do not store batteries at
temperatures higher than 60 °C
or in high humidity.
– This may result in explosion
or re.
• Make sure that the battery is
installed correctly.
– This prevent explosion or re.
• Incorrect battery replacement
may cause fire.
• Batteries: Store the accessories
(battery, etc.) in a safe location
out of the reach of children.
RiskGroup2
CAUTION Possibly hazardous
optical
radiation emitted from this
product. Do not
stare at operating
lamp. May be harmful to
the eye.
ANTENNA
OutdoorAntennaGrounding
• If an outdoor antenna is
installed, follow the precautions
below. An outdoor antenna
system should not be located in
the vicinity of overhead power
lines or other electric light or
power circuits, or where it can
come in contact with such power
lines or circuits as death or
serious injury can occur. Be sure
the antenna system is grounded
to provide some protection
against voltage surges and built-
up static charges. Section 810
of the National Electrical Code
(NEC) in the U.S.A. provides
information with respect to
proper grounding of the mast
and supporting structure,
grounding of the lead-in wire
to an antenna discharge unit,
size of grounding conductors,
location of antenna discharge
unit, connection to grounding
electrodes and requirements for
the grounding electrode.
13
SAFETYINSTRUCTIONS
Antennagroundingaccording
totheNationalElectrical
Code,ANSI/NFPA70
Antenna Lead in Wire
Grounding Conductor
(NEC Section 810-21)
Antenna Discharge Unit
(NEC Section 810-20)
Power Service
GroundingElectrode
System (NEC Art 250,
Part H)
NEC: National Electrical Code
Ground Clamp
Electric Service
Equipment
Ground Clamp
ForUSA
NOTETOCABLE/TV
INSTALLER
This reminder is provided to
call the CATV system installer’s
attention to Article 820 - 40 of the
National Electric Code (U.S.A.).
The code provides guidelines
for proper grounding and, in
particular, species that the cable
ground shall be connected to the
grounding system of the building,
as close to the point of the cable
entry as practical.
14 CONTENTS
CONTENTS
LICENSE 2
SAFETYINSTRUCTIONS 3
PREPARATION 16
Accessories 16
OptionalExtras 18
PartsandComponents 19
UsingtheJoystickButton 22
– Basic Functions 22
– Adjusting the Menu 23
ProjectorStatusIndicators 23
Installation 24
– Installation Precautions 24
– Projection Distance per
Screen Size 25
– How to Install the Projector
On a Tripod 27
– Kensington Security System
28
– How to use the ferrite core 29
REMOTECONTROL 30
USINGTHEPROJECTOR
33
ConnectingtoanAntennaor
Cable 33
UsingTheBattery 34
Batteryusingtimeinformation
35
WatchingProjector 36
– Turning on the Projector 36
– Focus of the Screen Image
38
– Watching Projector 38
ToSetChannel 39
– Memorizing the Available
Channels 39
AdditionalOptions 43
– Adjusting Aspect Ratio 43
– Using the Keystone Function
44
– Changing Input Device 45
– Blank Function 47
UsingtheQuickMenu 48
ENTERTAINMENT 49
UsingSCREENSHARE 49
SettingUpBluetoothonthe
Projector 50
– Searching for Bluetooth
Devices and Connecting 51
– Connecting, Disconnecting,
or Deleting Bluetooth
Devices in the List of
registered devices 53
– Adjusting AV Sync. Adjust
54
15
CONTENTS
MYMEDIA 55
BeforeUsing 55
– Connecting a USB Device 55
– Removing a USB Device 55
ToUseMyMedia 57
– Watching the Videos 61
– Viewing the Photos 67
– Listening to Music 71
– Viewing Files 75
3DFUNCTION 79
WhileWatching3D 79
RequirementsforWatching3D
Images 83
– Using the DLP-LINK (DLP-
Ready) Type Glasses 84
Toview3Dimages 84
– Supported 3D Mode 85
CUSTOMIZINGSETTINGS
86
SETTINGS 86
PICTURESettings 87
AUDIOSettings 94
CHANNELSettings 96
TIMESettings 97
WIRELESSSettings 99
LOCKSettings 101
OPTION1Settings 105
OPTION2Settings 108
CONNECTINGDEVICES
110
ConnectingtoHDReceiver,
DVD,VCRPlayer,orExternal
Devices 111
– HDMI Connection 111
– HDMI to DVI Connection 111
– Composite (AV) Connection
112
– Component Connection 112
ConnectingaPC 113
– HDMI Connection 113
– HDMI to DVI Connection 113
– RGB Connection 114
ConnectingaLaptop 115
– HDMI Connection 115
ConnectingtoHeadphones116
UsingtheMirroringFunction
ofaMobilePhone 117
– MHL/Slimport Connection 117
MAINTENANCE 118
Cleaning 118
– Cleaning the Lens 118
– Cleaning the Projector Case
118
SPECIFICATIONS 119
16 PREPARATION
PREPARATION
Accessories
Accessories included with the projector are show below.
The pictures may differ slightly from the actual product.
Accessories are subject to change without prior notice.
New accessories may be added or old ones removed.
#-"/, 3"5*0
Remote Control
Two AAA Batteries Owner's Manual Owner's Manual CD
AC-DC Adaptor Composite Gender Power Cord
Pouch Ferrite core
17
PREPARATION
• When connecting an HDMI or USB
cable, or connecting a USB flash drive
to the HDMI or USB port, use a product
that has a width of 18 mm or less and
a height of 10 mm or less. If the USB
cable or USB flash drive does not fit
the USB ports of the projector, use an
extension cable that supports USB 2.0.
• Use a certified cable with the HDMI logo attached.
• If you do not use a certified HDMI cable, the screen may not display or a
connection error may occur. (Recommended HDMI cable types)
– High-Speed HDMI®/™ Cable
– High-Speed HDMI®/™ Cable with Ethernet
18 PREPARATION
OptionalExtras
To purchase optional accessories, visit an electronics store or online
shopping site or contact the retail store where you purchased the product.
Optional accessories are subject to change without prior notice.
Projection Screen Tripod HDMI Cable
Video Cable Audio Cable
3D glasses
(DLP-LINK or DLP-
Ready Type)
RGB to Component
cable Component Cable MHL or Slimport cable
Computer Cable RF Cable
19
PREPARATION
PartsandComponents
The projector is manufactured using high-precision technology. You may,
however, see tiny black dots and/or bright colored dots (red, blue, or
green) that continuously appear on the projector screen. This is a normal
result of the manufacturing process and does not indicate a malfunction.
Lens
2)
Vent1)
Speaker
Speaker
Focus ring
Joystick button
Vent1)
1) Due to the high temperature of the vent area, do not get close to the
vent area.
2) Do not touch the lens when using the projector. The lens may be
damaged.
20 PREPARATION
1 2 3 4
1
(USB Port)
2
Port
3
OFF/ONSwitch
– OFF: Turns the projector off completely.
– ON: Turns the projector on and the projector goes into Standby
mode.
Place the switch to OFF when you move the projector or when you
intend not to use the projector for long periods of time.
• Charge the battery when the switch on the back of the
projector is set to ON. (The battery will not be fully charged
when it is charged with the switch on the back of the
projector set to OFF.)
NOTE
4
AVIN Port
21
PREPARATION
5 6 7 8 9
5
(Headphone Port)
6
RGBIN Port
7
Port
8
Battery Charge Indicator
– Red: Charging
– Green: Charging complete
9
DCIN Port
22 PREPARATION
UsingtheJoystickButton
You can operate the projector by pressing the button or moving the joystick
left, right, up, or down.
BasicFunctions
PowerOn
When the projector is turned off, place
your nger on the joystick button, press it
once, and release it.
PowerOff
When the projector is turned on, place
your nger on the joystick button, press
it once for a few seconds, and release it.
(However, if the Menu button is on the
screen, pressing and holding the joystick
button will let you exit the Menu.)
Volume
Control
If you place your nger over the joystick
button and move it left or right, you can
adjust the volume level.
Channels
Control
If you place your nger over the joystick
button and move it up or down, you can
scroll through the saved channels.
• When your finger is on the joystick button and you move it up, down,
left, or right, be careful not to press the joystick button. If you press
the joystick button first, you may not be able to adjust the volume
level and/or scroll through saved channels.
NOTE
23
PREPARATION
AdjustingtheMenu
When the projector is turned on, press the joystick button one time.
You can adjust the menu items ( , , , ) moving the joystick
button left, right, up, or down. Move to the desired menu item, and then
press the joystick button once to select it.
Close
Projector
off Turns the power off.
InputList Changes the input source.
Close
Clears on-screen displays
and returns to projector
viewing.
Settings Displays the Settings menu.
ProjectorStatusIndicators
LEDPowerIndicator
LEDPowerIndicator
Red Power standby state
Off The projector is operating with the power on.
24 PREPARATION
Installation
InstallationPrecautions
• Place the projector in a well-
ventilated environment.
– To prevent internal heat
build-up, install the projector
in a well-ventilated place. Do
not place anything near the
projector as this may block
its air vents. If the air vents
are blocked, the internal
temperature will increase.
– Do not place the projector
on a carpet or rug. If the
vent is on the bottom, use
the projector on a solid level
surface and ensure the vent
is not blocked.
– Be sure to prevent foreign
objects such as paper debris
from entering the projector.
– Leave enough distance
(30 cm or more) around the
projector.
• Do not place the projector in a
hot or humid environment.
– Do not place the projector
in a hot, cold, or humid
environment.
• Do not place the projector in a
place where it will easily attract
dust.
– This may result in re.
• Never open any cover on the
projector. There is a high risk of
electric shock.
• The projector is manufactured
using high-precision technology.
You may, however, see tiny
black dots and/or bright colored
dots (red, blue, or green)
that continuously appear on
the projector screen. This
is a normal result of the
manufacturing process and
does not indicate a malfunction.
• The remote control may not
work in an environment where
a lamp equipped with electronic
ballasts or a three-wavelength
fluorescent lamp is installed.
Replace the lamp with an
international standard lamp
for the remote control to work
normally.
25
PREPARATION
ProjectionDistanceperScreenSize
1 Place the projector on a sturdy, level surface, together with the PC or
audio/video source.
2 Place the projector an appropriate distance away from the screen. The
distance between the projector and the screen determines the actual
size of the image.
3 Position the projector so that the lens is at a right angle to the screen.
If the projector is not at a right angle, the projected image will look
distorted. To correct the distortion, use the keystone function.
(See page 44.)
4 Connect the power cord of the projector and the connected device to
the wall outlet.
Ratioofupwardprojection:100%
X/2 X/2
Projection Distance (D)
Screen Height (X)
Screen
Y/2 Y/2
Projection Distance (D)
Screen Width (Y)
Screen
26 PREPARATION
16:9Ratio
ScreenSize
(mm)
ScreenWidth
(Y)(mm)
ScreenHeight
(X)(mm)
Projection
Distance(D)
(mm)
635 553 311 769
762 664 374 923
889 775 436 1077
1016 886 498 1236
1143 996 560 1385
1270 1107 623 1539
1397 1218 685 1692
1524 1328 747 1846
1651 1439 809 2000
1778 1550 872 2154
1905 1660 934 2308
2032 1771 996 2462
2159 1882 1058 2616
2286 1992 1121 2769
2413 2103 1183 2923
2540 2214 1245 3077
27
PREPARATION
HowtoInstalltheProjectorOnaTripod
• You can install this projector using a camera tripod.
As shown below, you can mount the projector instead of a camera on
the tripod.
• When stabilizing the tripod, we recommend using a locking bolt of
standard size 4.5 mm or less. The maximum size allowed for the locking
bolt is 5.5 mm.
(If it is longer than the maximum allowed size, it may damage the
projector.)
+⇒
The projector is
connected to this part. Tripod
Bolt used to
attach the
projector
Bottom side of the
projector
• If you are using a tripod, be careful not to apply external force to the
tripod. Doing so may damage the projector.
• Do not place the tripod on an unstable surface.
• Be sure to use a tripod with a maximum load capacity of 3 kg or
more.
• To use the projector safely, position the tripod legs so that they are
as wide and stable as possible and be sure to securely attach the
projector to the tripod.
CAUTION
28 PREPARATION
KensingtonSecuritySystem
• This projector has a Kensington Security Standard connector. Connect a
Kensington Security System cable as shown below.
• For more information on installation and use of the Kensington Security
System, refer to the user’s guide provided with the Kensington Security
System.
• The Kensington Security System is an optional accessory.
• What is Kensington? Kensington is a company that provides security
systems for laptops and other electronic devices.
Website: http://www.kensington.com
29
PREPARATION
Howtousetheferritecore
* Use the ferrite core as illustrated below to reduce electromagnetic
radiation.
* The pictures may differ slightly from the actual product.
Put the ferrite core around the power cable as illustrated below.
Place the ferrite core as close to the power plug as possible for best
results.
Powerplug AC/DCadaptor
30 REMOTECONTROL
REMOTECONTROL
Open the lid at the back of the remote
control and insert the batteries as described
in the instructions.
Use new batteries and do not mix regular or
rechargeable batteries. (1.5 V AAA)
• Do not mix new batteries with old ones.
CAUTION
#-"/,
3"5*0
(POWER)
Turns the projector on or off.
USB/MYMEDIA
Accesses USB mode.
BLANK
Blanks the screen.
RATIO
Changes the aspect ratio of the screen
per pressing of the button.
ENERGYSAVING
Reduces power consumption by adjusting
peak screen brightness.
INPUT
Changes the input source.
Numberbuttons
Enters a number.
–(dash)
Enters a channel number, such as 2-1
or 2-2.
LIST
Displays the channel list.
FLASHBK
Displays the channel you were watching
previously.
VOL+,-
Adjusts the volume level.
FAV
Shows favorite channels.
3D
Shows 3D images.
MUTE
Mutes the sound of the projector.
CH
,
Changes the TV channel.
31
REMOTECONTROL
#-"/,
3"5*0
L/R
Switches left and right in 3D mode.
INFO
Displays the information of a program or
screen.
STILL
Freezes the moving image.
(Available in any mode other than USB
mode.)
SETTINGS
Displays or closes the Settings menu.
Q.MENU
Allows you to change the settings easily.
Up/Down/Left/Rightbuttons
Sets the function or moves the cursor.
OK
Shows the current mode and saves
changes to the settings.
Returns to the previous screen.
EXIT
Exits the menu.
Key's
,
Adjusts the Keystone function.
Playbackcontrolbuttons
Controls playback of MYMEDIA.
Colorbuttons
Sets detailed settings or gesture for each
menu.
32 REMOTECONTROL
• When using the remote control, the optimal
operation range is 6 meters or less (left/right)
and within a 30 degree arc of the remote
control IR receiver.
• If a cable is connected to the back port, the
optimal operating range is 3 meters or less
(left/right) and within a 30 degree arc of the
remote control IR receiver.
• For seamless operation, do not block the IR
receiver.
• When you carry the remote control in the portable bag, make
sure that the buttons on the remote control are not pressed by the
projector, cables, documents or any other accessories in the bag.
Otherwise, it may significantly reduce the battery life.
NOTE
#-"/, 3"5*0
30° 30°
33
USINGTHEPROJECTOR
USINGTHEPROJECTOR
ConnectingtoanAntennaorCable
To watch TV using an indoor/
outdoor antenna, connect a wall
terminal and the
port of the Projector using an RF
cable (75 Ω).
You can watch terrestrial or cable
(analog or digital) TV.
(The RF cable is sold separately.)
• Make sure not to bend the copper wire of the RF cable (75 Ω). Turn
the input jack to the right to fasten it.
Copper wire
• Ensure you use a standard coaxial cable (75 Ω, sold separately)
when connecting to the projector input.
• For better image quality in locations where signal strength is low,
purchase and install a signal amplifier (booster).
• A signal splitter is required if you want to use two or more projectors
through one antenna.
• If you have any problems when installing the antenna, please consult
a suitable retailer or the store where you purchased the antenna.
NOTE
34 USINGTHEPROJECTOR
UsingTheBattery
The battery is low. Connect a power
supply for charging.
• It is displayed when the battery is low (Energy Saving will be changed
Maximum mode and will be disabled).
• If the screen shows a low battery message, be sure to charge the
battery.
The device powers off due to insufficient
battery.
• It is displayed when the battery is running out.
• As your battery is running out, the projector will turn off immediately.
35
USINGTHEPROJECTOR
Batteryusingtimeinformation
Status Time and Display
Charging About 3 hours
Usage
Hours
Up to 2.5 hours
(Available battery using time up to 2.5 hours when
Energy Saving mode set to Max.)
Battery
Level
Indicator
Step 5Step 4Step 3Step 2Step 1 Full
Step 1 Step 2 Step 3 Step 4 Step 5 Full
• Charge the battery when the switch on the back of the projector is
set to ON. (The battery will not be fully charged when it is charged
with the switch on the back of the projector set to OFF.)
NOTE
• If you do not intend to use the projector for a long time, leave the battery
charged at 40 % to 50 %.
• The battery is automatically recharged when the projector is connected
to a power supply.
• Charge the battery fully when you first use the projector.
• The battery standard usage time given in the manual is based on
measurements taken by LG; the actual time may vary depending upon
usage.
• Battery usage time may vary depending on broadcast type, operating
temperature, period of use, and user preferences.
• As the battery is consumable, its lifetime gradually decreases. When the
battery’s life is reduced by half, replace it with a new battery from an LG
Electronics Customer Support Center.
• Do not charge the battery using any equipment other than that supplied
with the product. This may damage the battery or cause a fire.
• Always use a battery that is approved and certified by LG Electronics,
Inc. Failure to do so may result in an explosion or fire.
• If the battery is leaking or giving off an odor, discontinue its use
immediately and contact LG Electronics Customer Support Center.
• The battery contains lithium-ion, so please handle with care. Failure to
do so may result in an explosion or fire.
36 USINGTHEPROJECTOR
WatchingProjector
TurningontheProjector
The menu screen display in this owner's manual is an example to help
users understand how to operate the product and may look different from
the actual screen.
1 Connect the power cord correctly.
2 Place the OFF/ON switch on the rear port area to ON and press the
POWER button on the joystick button or on the remote control. (If the
switch is placed to OFF, the projector will not turn on.)
3 In the Language Selection screen, select a language.
English
Español
Français
한국어
4 In the ModeSetting screen, select the setting mode you want.
Step 2. Mode Setting
Selecting the environment.
Choose the setting mode you want.
Select [Standard] when setting Projector up in-home. You
can adjust picture quality accordingly through Picture Mode
menu option.
Confirm
Previous
Standard Store Demo
Demo Mode
Off
* StoreDemo is used when displaying the product in-store. The picture
mode is automatically reset after a certain period of time. You can select
Standard to use the product at home.
37
USINGTHEPROJECTOR
5 In the TimeZone screen, select TimeZone region and Daylight
Savingoption.
Step 3. Time Zone
Time Zone Eastern
Daylight Saving Auto
Confirm
Previous
6 Select an input signal by using the INPUT button on the remote control.
Input List
TV AV Component
SCREEN SHARE
USB RGB-PC
ꔂ Move ꔉ OK
ExitInput Label
HDMI
38 USINGTHEPROJECTOR
FocusoftheScreenImage
When an image appears on the screen, check if it is in focus and ts the
screen properly.
Adjust the focus of the image by rotating the Focus Ring to the left or right.
Make sure the product does not move when adjusting the focus.
Focus Ring
WatchingProjector
1 In standby mode, press the POWER button to turn the projector on.
2 Press the INPUT button and select the input signal you want.
3 Control the projector using the following buttons while watching
projector.
Button Description
CH
,
Changes the TV channel.
LIST Displays the channel list.
Number
buttons
Enters a number.
VOL+,- Adjusts the volume level.
MUTEMutes all sounds.
Q.MENU Accesses the quick menu. (See page 48.)
FLASHBK Displays the channel you were watching previously.
4 To turn the projector off, press the POWER button.
39
USINGTHEPROJECTOR
ToSetChannel
Image shown may differ from your projector.
MemorizingtheAvailableChannels
UsingtheAutoTuningfunction
Saves a channel which is currently broadcasting. Be sure to activate Auto
Tuning when you move to a new home or change the position of your
projector. When you activate this function, make sure that the antenna is
connected and there are channels broadcasting signals.
1 Press the SETTINGS button.
2 Press the , , , or button to select CHANNEL and press the
OK button.
3 Press the , button to select AutoTuning and press the OK
button.
4 Select Start to start automatic tuning. The projector scans and saves
available channels automatically.
5 When you are nished, press the EXIT button.
40 USINGTHEPROJECTOR
MemorizingorDeletingChannelsManually
1 Press the SETTINGS button.
2 Press the , , , or button to select CHANNEL and press the
OK button.
3 Press the or button to select ManualTuning and press the OK
button.
4 Scroll through the channel types, and then add or delete channels.
5 When you are nished, press the EXIT button.
• If LockSystem is turned on, a pop-up window will appear asking for
password.
• You can store up to 1000 Channels. The number of channels
that you can store differs depending on the broadcasting signal
environment.
• AutoTuning memorizes the Channels that are currently being
broadcast.
• The channels are stored in the order of DTV, TV, Cable DTV, and
Cable TV.
NOTE
41
USINGTHEPROJECTOR
EditingYourChannelList
1 Press the SETTINGS button.
2 Press the , , , or button to select CHANNEL and press the
OK button.
3 Press the or button to select ChannelEdit and press the OK
button.
4 Edit channels using the following buttons.
Channel Edit Antenna
Page 1/1
3-1 5-1 7-1
DTV TV Cable DTV Cable TV
Add/Delete Block/Unblock ꘂ Favorite Ch.
ꔂ Move ꔉ OK
Button Description
Red Adds or deletes a channel.
Green Block or unblock a channel.
FAV Adds a favorite channel.
5 When you are nished, press the EXIT button.
42 USINGTHEPROJECTOR
FavoriteChannelSetup
1 Press the SETTINGS button.
2 Press the , , , or button to select CHANNEL and press the
OK button.
3 Press the or button to select ChannelEdit and press the OK
button.
4 Move to your desired channel.
5 Press the FAV button to access the SetasFavorite.
6 Press the or buttons to scrolls through channel group.
7 Press the OK button.
SetasFavorite
Select a favorite channel group.
Multiple selection is available.
Group A
Group B
Group C
Group D
OK Cancel
43
USINGTHEPROJECTOR
AdditionalOptions
AdjustingAspectRatio
• Resize an image to view at its optimal size by pressing RATIO while you
are using the projector.
• Available picture size may differ depending on the input signal.
• You can also use the Q.MENU or SETTINGS button.
NOTE
Menu Description
16:9 Resizes images to the 16:9 ratio.
JustScan Displays video images in the original size without removing
parts of the edge of the image.
• If you select JustScan, you may see image noises at
the edge or edges of the screen.
SetBy
Program
Displays images in the same aspect ratio as the original
image.
4:3 Resizes images to the previous standard 4:3.
Zoom Resizes the image to t the screen width. The top and
bottom parts of the image may be cut off.
Press the , or button to zoom in or out of the image.
Press the or button to move the image.
Cinema
Zoom1
Formats an image to the cinemascope ratio, 2.35:1. It
ranges from 1 to 16.
Press the , or button to zoom in or out of the image.
Press the or button to move the image.
• If you enlarge or reduce an image, the image may be
distorted.
44 USINGTHEPROJECTOR
UsingtheKeystoneFunction
To prevent the screen image from becoming trapezoidal, Keystone
adjusts the top and bottom width of the image if the projector is not set up
at a right angle to the screen.
Because the Keystone function may cause inferior screen image quality,
use this function only when it is not possible to set up the projector at an
optimal angle.
• Keystone 0 ◀
- +
▶
OK
1 Press the Key's
,
or Key's
,
button to adjust the picture.
• Keystone can be adjusted from -40 to 40.
2 Press the OK button when done.
45
USINGTHEPROJECTOR
ChangingInputDevice
Toselectanexternalinput
Selects external input.
• Press the INPUT button on the remote control to display the input
selection screen.
– Connected inputs are displayed rst. However, TV / AV / Component /
SCREENSHARE input is always activated.
• Select an input signal using the remote control's INPUT button to
connect the projector to the desired input. You can use the , , ,
or button to switch between all the input modes.
Input List
TV AV Component
SCREEN SHARE
USB RGB-PC
ꔂ Move ꔉ OK
ExitInput Label
HDMI
46 USINGTHEPROJECTOR
SelectinganInputLabel
Displays which devices are connected to which input ports.
Input Label
AV ◀ ▶
Component ◀ ▶
RGB-PC ◀ ▶
HDMI ◀ ▶
Close
1 Press the INPUT button on the remote control to display the input
selection screen.
2 Press the red button.
3 Use the or button to scroll to one of the input sources.
4 Use the , or button to select one of the input labels.
47
USINGTHEPROJECTOR
BlankFunction
UsingtheBlankFunction
This function may be effective when you need to draw attention during a
meeting or training.
1 Press the BLANK button, and the screen is covered by the
background color. You can change the background color by referring
to SelectingaBlankImage.
2 Press any button to clear the blank function. To cover the screen
temporarily, press the BLANK button on the remote control. Do not
block the lens with any object while the projector is running. It may
become overheated and deformed or even cause a re.
SelectingaBlankImage
1 Press the SETTINGS button.
2 Press the , , , or button to select OPTION2 and press the
OK button.
3 Press the , button to select BlankImage and press the OK
button.
4 Use the or button to move to the setting or option you want and
press the OKbutton.
48 USINGTHEPROJECTOR
UsingtheQuickMenu
You can customize frequently used menus.
1 Press the Q.MENU button.
2 Press the , or button to select a menu and press OK.
Menu Description
AspectRatio Resizes the picture.
PJTMode Turns the projected image upside down or ips it
horizontally.
PictureMode Changes the picture mode.
MultiAudio Sets MONO or STEREO, or a language for a bilingual
broadcast (Digital signal).
SAP Changes the MTS sound (Analog signal).
SleepTimer Sets the projector to be turned off at the specied time.
ClearVoiceII Makes the voice from the projector crisp and clear.
Del/Add Can delete or add channels.
USBDevice Allows you to remove a connected USB device in a
safe manner.
(The menu is displayed only when the USB device is
connected.)
3 Press the or button to scroll through the following menus.
49
ENTERTAINMENT
ENTERTAINMENT
UsingSCREENSHARE
1 Set the external input of the projector to SCREENSHARE.
2 Enable related SCREEN SHARE function on the device you wish to
connect.
3 Connect the Projector from the search list on the device you wish to
connect. (When you connect the projector to your laptop, input the PIN
code shown on your display. The request for a PIN will be shown only
at the initial connection.)
4 If the desired device accepts the request, SCREEN SHARE will be
started.
• Windows 7 / 8 / 8.1 are compatible with SCREEN SHARE. However,
other versions of Windows, and some other operating systems, may
not be compatible with SCREEN SHARE.
• Ice Cream Sandwich, Jellybean, Kitkat, and Lollypop versions of
LG’s Android devices are guaranteed to be compatible.
• When connecting via SCREEN SHARE, place the device close to
the projector.
• The response rate and image quality may vary depending upon the
user’s environment.
• For more information on the device you want to connect to, refer to
its owner’s manual.
• Certain Windows 8.1 laptops may have difficulty in reconnecting
when initializing the device information during a wireless connection.
In this case, it is recommended that you remove the registered
device and reconnect.
CAUTION
50 ENTERTAINMENT
SettingUpBluetoothontheProjector
This option is used to output sound from the projector through Bluetooth
audio devices.
• Press the SETTINGS button on the remote control, and then set
Bluetooth to On in the WIRELESS menu.
• The devices that can be connected are as follows: LG BTS1, LG
HBS-700, LG HBS-730, LG HBS-800 (Models available for purchase
may vary by region.)
• Products from other manufacturers may not be compatible.
• You can use the remote control to adjust the volume of the
connected device.
• When connecting devices wirelessly, if the device connection fails,
check that the device is connected to a power supply and also check
that the Bluetooth audio device is operating properly.
• If Bluetooth is turned on, the projector will automatically connect
to the last connected Bluetooth device when the projector powers
on. (Be sure to check that the last connected Bluetooth device is
powered on as well.)
• This projector does not support the LG TV Sound Sync feature. To
use products that support the LG TV Sound Sync feature, use the
general Bluetooth mode instead of the LG TV mode.
• The Bluetooth function is to connect the product to Bluetooth
speakers or Bluetooth headset. You cannot connect the product to a
mobile phone through the Bluetooth function.
NOTE
51
ENTERTAINMENT
SearchingforBluetoothDevicesandConnecting
Go to SETTINGS → WIRELESS → SearchDevice to search for nearby
Bluetooth audio devices and then connect any detected devices to the
projector.
(If the device name is longer than 20 characters, no more than 20 will be
displayed.)
1 Set the Bluetooth device to pairing mode and then select Search
Device.
• Select Stopsearching to view the devices detected so far.
• If the device has not been detected, check that the device is powered
on and in pairing mode.
• The time it takes to search for devices may vary according to the
signal strength and the number of devices.
WIRELESS
ꔂ Move ꔉ OK
•SCREEN SHARE : [PJTR][LG]PH550[0000]
•Group
•Channel
•Bluetooth : On
•Search Device
•List of registered devices
•AV Sync. Adjust
52 ENTERTAINMENT
2 When the search is complete, you can select a Bluetooth device and
connect to it.
• You can stop the connection process immediately by selecting Stop
searching.
• The time it takes to connect to a device may vary according to the
signal strength and the number of devices.
Search Device
Stop searching Close
List
Please wait.
Searching...
Search Device
List
Press OK(ꔉ) to connect the device.
HBS-700
Search complete
Re-search Close
3 When a Bluetooth device is connected, you will hear sound from the
projector through the connected device.
• The connected Bluetooth device will be added automatically to the
Listofregistereddevices. Once registered, Bluetooth devices can
be connected simply by selecting them from theListofregistered
devices without having to search for them.
• Connected devices can only be disconnected from SETTINGS →
WIRELESS → Listofregistereddevices.
53
ENTERTAINMENT
Connecting,Disconnecting,orDeletingBluetooth
DevicesintheListofregistereddevices
In SETTINGS → WIRELESS → Listofregistereddevices, Bluetooth
devices are shown in the order that they were connected, and the same
devices can be reconnected simply by selecting them without having to
search for them again.
List of registered devices
List
HBS-700
Delete All Close
Press OK(ꔉ) to connect the device.
Delete
Connecting
Select a Bluetooth device from the Listofregistereddevices to connect
to it.
• The registered Bluetooth device will attempt to connect automatically
depending on the characteristics of the device. (Refer to the manual for
the Bluetooth device.)
• You can stop the connection process immediately by selecting Stop.
• The time it takes to connect to a device may vary according to the signal
strength and the number of devices.
Disconnecting
Select Disconnect to disconnect the device.
• You can only disconnect a device from the Listofregistereddevices.
54 ENTERTAINMENT
Deleting
Select DeleteMarked or DeleteAll to delete any registered devices.
• DeleteMarked: Press the red button in Listofregistereddevices to
delete the selected device.
• DeleteAll: Select DeleteAll in Listofregistereddevices to delete all
of the registered devices.
AdjustingAVSync.Adjust
When a Bluetooth device is connected, go to SETTINGS → WIRELESS
→ AVSync.Adjust to adjust the synchronization between the video and
the Bluetooth headset sound.
• AV Sync. Adjust 10 ◀ ▶
OK
• This feature is only available when a Bluetooth device is connected.
• Audio sync may vary by manufacturer.
• When playing video from a connected USB drive, AVSync.Adjustcan
also be adjusted using the SetAudio. menu.
55
MYMEDIA
MYMEDIA
BeforeUsing
ConnectingaUSBDevice
Connect a USB device (external HDD, USB memory) to the USB port
of projector to enjoy the content les stored in the USB device with your
projector. You cannot write or delete data in the USB device. Connect a
USB ash drive as shown below.
USB Flash Drive
RemovingaUSBDevice
1 Click the Q.MENU button.
2 Use the or button to move to USBDevice and press the OK
button.
3 Select a USB to remove. Wait for conrmation that the USB device
has stopped before removing the USB.
• If detached early, an error may occur on the projector or the USB
storage device.
• Once a USB device has been selected for removal, it can no longer
be read. Remove the USB storage device and then re-connect it.
NOTE
56 MYMEDIA
TipsforUsingaUSBDevice
• If the USB storage device has a built-in auto recognition program or uses
its own driver, it may not work.
• Some USB storage devices may not work or may work incorrectly.
• If you use a USB extension cable, the USB device may not be
recognized or may not work properly.
• Use only USB storage devices formatted with the Windows FAT32 or
NTFS file system.
• For external USB HDDs, it is recommended that you use devices with a
rated voltage of less than 5 V and a rated current of less than 500 mA.
• It is recommended to use a USB hub or hard disk drive with power
supplied. (If the power supplied is not enough, the USB storage device
may not be detected properly.)
• It is recommended that you use USB flash drives of 32 GB or less and
USB HDDs of 1 TB or less.
• If a USB HDD with power-saving function does not work properly, turn
the power off and on. For more information, refer to the user manual of
the USB HDD.
• Data in USB storage device can be damaged so be sure to back
up important files to other devices. Data maintenance is the user's
responsibility and the manufacturer is not responsible for data loss.
57
MYMEDIA
ToUseMyMedia
1 Press the SETTINGS button on the remote control.
2 Select MYMEDIA.
Select desired le from the list. Watch the chosen le.
Sets play related settings by checking option during disk playback.
MyMediasupportingfile
• Maximum data transfer rate: 20 Mbps (Mega bit per second)
• External supported subtitle formats: *.smi, *.srt, *.sub (MicroDVD,
SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX)
• Internal supported subtitle formats: SRT/ASS/SSA (Supports internal
subtitles generated from DivX6)
58 MYMEDIA
VideoSupportedCodec
Maximum: 1920 x 1080 @ 30p (only Motion JPEG 640 x 480 @ 30p)
Extension Codec
.asf,.wmv
Video VC-1 Advanced Prole, VC-1 Simple and Main
Proles
Audio WMA Standard, WMA 9 Professional
.divx,.avi
Video DivX3.11, DivX4, DivX5, DivX6, XVID,
H.264/AVC
Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3),
Dolby Digital
.mp4,
.m4v,
.mov
Video H.264/AVC, MPEG-4 Part 2
Audio AAC
.mkv
Video H.264/AVC
Audio HE-AAC, Dolby Digital
.ts,.trp,
.tp,.mts,
.m2ts
Video H.264/AVC, MPEG-2, VC-1
Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3),
Dolby Digital, Dolby Digital Plus, AAC
.vob
Video MPEG-1, MPEG-2
Audio Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM
.mpg,
.mpeg
Video MPEG-1
Audio MPEG-1 Layer I, II
59
MYMEDIA
AudioFile
Filetype Item Info
MP3 Bitrate 32 kbps to 320 kbps
Samplingrate 32 kHz to 48 kHz
AC3 Bitrate 32 kbps to 640 kbps
Samplingrate 32 kHz, 44.1 kHz, 48 kHz
MPEG Bitrate 32 kbps to 448 kbps
Samplingrate 32 kHz to 48 kHz
AAC,
HEAAC
Bitrate 24 kbps to 3844 kbps
Samplingrate 8 kHz to 96 kHz
CDDA Bitrate 1.44 kbps
Samplingrate 44.1 kHz
LPCM
Bitrate 1.41 Mbps to 9.6 Mbps
Samplingrate
Multi-channel : 44.1 kHz, 88.2 kHz /
48 kHz, 96 kHz
Stereo : 176.4 kHz, 192 kHz
60 MYMEDIA
Availablephotofile
Filetype Item Info
2D(jpeg,
jpg,jpe),
3D(jps)
Support
Filetype
SOF0: Baseline, SOF1: Extend Sequential,
SOF2: Progressive
Picture
Size
Minimum: 64 x 64
Maximum:
Normal Type: 15360 (W) x 8640 (H)
Progressive Type: 1920 (W) x 1440 (H)
3D(mpo)
Support
Filetype MPO
Picture
Size
4:3 size : 3648 x 2736, 2592 x 1944,
2048 x 1536
3:2 size : 3648 x 2432
BMP Picture
Size
Minimum: 64 x 64
Maximum: 9600 (W) x 6400 (H)
PNG
Support
Filetype Interlace, Non-Interlace
Picture
Size
Minimum: 64 x 64
Maximum: Interlace: 1200 (W) x 800 (H)
Non-Interlace: 9600 (W) x 6400 (H)
* BMP and PNG format les may be slower to display than JPEG.
61
MYMEDIA
WatchingtheVideos
In the MovieList, you can watch movies stored on the connected USB
device.
Controls playback and sets options while viewing videos.
TipsforPlayingVideoFiles
• Some subtitles created by users may not work properly.
• The video and subtitle files should be placed in the same folder. For
subtitles to display correctly, the video and subtitle files must have the
same name.
• We do not support any stream that contains GMC (Global Motion
Compensation) or Qpel (Quarterpel Motion Estimation).
• Only H.264/AVC profile level 4.1 and lower is supported.
• Video files that exceed 50 GB (gigabyte) are not supported for playback.
The file size limit is dependent on the encoding environment.
• DTS audio codec is not supported.
62 MYMEDIA
BrowsingMovieList
Play a video le stored in the connected device.
1 Connect a USB storage device.
2 Press the USB button.
3 Use the , or button to select MovieList and press the OK button.
4 Use the , , , or button to select the le you want and press
the OK button.
USB STORAGE DEVICE
Page 1/1
Page 1/1
Drive1 Drive5Drive3 Drive4
Drive2
CH Page Change
Movie List
Butterfly_...
01:34:33
Go to root folder
Go to upper folder
Exit
1 2 4 5
6
7 8 9
3
Description
1
Thumbnails
Abnormal le
File not supported
2
File List
3
Moves to the upper level folder.
4
Current page/Total no. of folder pages
5
Displays the remaining battery life.
6
Current page/Total no. of le pages
63
MYMEDIA
Description
7
Moves to the top level folder.
8
Moves to the upper level folder.
9
Exit Movie List.
5 Control playback by using the following buttons.
나가기
Q.MENU
Option Hide Exit
Setting Description
Shows the current playing position. Use , or buttons to
move forward or backward.
Stops playing and returns to Movie List.
Returns to normal playback.
Pauses the media player.
If no button is pressed on the remote control for 10 minutes
after pausing, the playback is restarted.
Displays in slow motion.
Whenever this button is pressed, the playback speed is
changed.
x2, x4, x8, x16, x32
Reduces power consumption by adjusting peak screen
brightness. (If the screen shows a low battery message,
Energy Saving will be changed Maximum mode and will be
disabled)
Switches to the 3D screen.
Option A pop-up window will appear.
Hide Hides the playback bar. Press the OK button to make it
appear.
Exit Returns to the Movie List screen.
64 MYMEDIA
OptionsforMovieList
1 Press the Q.MENU button.
2 Use the or button to move to a desired option and press the OK
button.
3 Use the , , , or button to set up each item.
SetVideoPlay.
Setting Description
Picture
Size
Selects the size of a playback screen.
• Full: Files are played in full screen mode according to the
aspect ratio of video.
• Original: Displays the video in the original size.
Audio
Language
Allows you to select the language you want for the le with
multiple audio tracks. This option is not available if the le
has only one audio track.
Subtitle
Language
The subtitle can be turned on or off.
• Language: One of any of the available languages can be
selected.
• CodePage: A character set used for a subtitle can be
selected.
By default, the subtitle is displayed in a language
configured in OPTION1 → Language.
– Sync : If a subtitle is not synchronized with its video,
you can adjust its speed at 0.5 seconds unit.
– Position : Moves the location of a subtitle.
– Size : Changes the subtitle font size.
Repeat Turns the repeat function On or Off.
When it is set to off, the next le can be played sequentially if
the le name is similar.
SetVideo.
You can change video settings.
(Refer to PICTURE Settings on page 87.)
SetAudio.
You can change audio settings.
(Refer to AUDIO Settings on page 94.)
Set3DVideo
You can set 3D video or 2D video.
3Dsetting
You can set 3D settings. (Refer to OPTION 1 Settings on page 105.)
65
MYMEDIA
RegisteringtheDivXcode
Checks DivX Reg. Code for replaying DivX protected videos. Register at
http://vod.divx.com.
Use Reg. Code to rent or purchase movies at www.divx.com/vod.
1 In the Settings menu, move to OPTION1 and press DivX(R)VOD.
Registration
Deregistration
Close
2 Press the or button to move to Registration and press the OK
button.
You must register your device to
play DivX(R) protected videos.
Registration code : XXXXXXXXXX
Register at http://vod.divx.com
OK
3 Check the DivX Registrationcode.
• Rented/purchased DivX files cannot be played if the DivX
Registration Code of a different device is used. Use only the DivX
Registration Code granted to this specific device.
• Converted files not conforming to the DivX Codec Standard may not
play or may produce abnormal sound.
NOTE
66 MYMEDIA
ToderegistertheDivXcode
Use the DivX deregistration code to deactivate the DivX DRM function.
1 In the Settings menu, move to OPTION1 and press DivX(R)VOD.
2 Use the or button to go to Deregistration and press the OK
button.
Registration
Deregistration
Close
No
No
Yes
Yes
Your device is already registered.
Are you sure you wish to deregister?
Deregistration code : ********
Deregister at http://vod.divx.com
Continue with registration?
3 Select Yes.
• What is DRM [Digital Rights Management]?
This is a technology and service that prevents the illegal use of
digital contents to protect the benefits and rights of the copyright
owner. Files can be played after the license is verified through an
online method, etc.
NOTE
67
MYMEDIA
ViewingthePhotos
You can view photos stored on a connected device.
SupportedPhotoFiles
PHOTO (*.JPEG)
Baseline: 64-pixel (width) x 64-pixel (height) - 15360-pixel (width) x
8640-pixel (height)
Progressive: 64-pixel (width) x 64-pixel (height) - 1920-pixel (width) x
1440-pixel (height)
• Non-supported files are displayed in the form of an icon.
• An error message is displayed for corrupted files or file formats that
cannot be played.
• Corrupted files may not be displayed properly.
• It may take some time to view high-resolution images in full screen.
68 MYMEDIA
BrowsingPhotoList
1 Connect a USB storage device.
2 Press the USB button.
3 Use the , or button to select PhotoList and press the OK button.
4 Use the , , , or button to select the le you want and press
the OK button.
USB STORAGE DEVICE
Page 1/1
Page 1/1
Drive1 Drive5Drive3 Drive4
Drive2
CH Page Change
Photo List
Butterfly_...
06/09/2014
Go to root folder
Go to upper folder
Exit
1 2 4
7 8 9
3
6
5
Description
1
Thumbnails
Abnormal le
File not supported
2
File List
3
Moves to the upper level folder.
4
Current page/Total no. of folder pages
5
Displays the remaining battery life.
6
Current page/Total no. of le pages
7
Moves to the top level folder.
8
Moves to the upper level folder.
9
Exit
69
MYMEDIA
5 Control playback by using the following buttons.
01_a.jpg
2008/12/10
1920 x 1080
479 KB
[1/4]
Q.MENU
Slideshow BGM Option Hide Exit
Setting Description
Selects the previous or next photo.
Slideshow All photos are displayed during slide show.
• Set SlideSpeed in the Option → SetPhotoView.
menu.
BGM You can listen to music while viewing photos in full size.
• Set BGM in the Option → SetPhotoView. menu.
Rotates photos.
• Rotates a photo 90°, 180°, 270°, or 360° clockwise.
• Photos cannot be rotated if their width is greater than the
height of the max. supported resolution.
Views the photo in full mode or original mode.
Press the blue button to enlarge the image.
Reduces power consumption by adjusting peak screen
brightness. (If the screen shows a low battery message,
Energy Saving will be changed Maximum mode and will be
disabled)
Switches to the 3D screen.
Option A pop-up window will appear.
Hide Hides the menu on the full size screen.
• To see the menu, press the OK button on the remote
control.
Exit Exit from full screen photo view.
70 MYMEDIA
OptionsforPhotoList
1 Press the Q.MENU button.
2 Use the or button to move to a desired option and press the OK
button.
3 Use , , , or button to set up each item.
SetPhotoView.
Setting Description
Slide
Speed Selects a slideshow speed.
BGM Selects a music folder for the background music.
• You cannot change the music folder while the background
music is playing.
• For background music, only the folder from the same
device can be selected.
– Repeat : Selects repeat play.
– Random : Selects random play.
SetVideo.
You can change video settings.
(Refer to PICTURE Settings on page 87.)
SetAudio.
You can change audio settings.
(Refer to AUDIO Settings on page 94.)
Set3DVideo
You can set 3D image or 2D image.
3Dsetting
You can set 3D settings. (Refer to OPTION 1 Settings on page 105.)
71
MYMEDIA
ListeningtoMusic
You can play audio les stored on the connected device.
SupportedMusicFiles
*.MP3
Bit rate range 32 Kbps to 320 Kbps
• Sampling rate MPEG1 Layer3: 32 kHz, 44.1 kHz, 48 kHz
• Sampling rate MPEG2 Layer3: 16 kHz, 22.05 kHz, 24 kHz
72 MYMEDIA
BrowsingMusicList
1 Connect a USB storage device.
2 Press the USB button.
3 Use the , or button to select MusicList and press the OK button.
4 Use the , , , or button to select the le you want and press
the OK button.
USB STORAGE DEVICE
Page 1/1
Page 1/1
Drive1 Drive5Drive3 Drive4
Drive2
CH Page Change
Music List
Butterfly_...
03:25
Go to root folder
Go to upper folder
Exit
1 2 4
7 8 9
3
6
5
Description
1
Thumbnails
Abnormal le
File not supported
2
File List
3
Moves to the upper level folder.
4
Current page/Total no. of folder pages
5
Displays the remaining battery life.
6
Current page/Total no. of le pages
7
Moves to the top level folder.
8
Moves to the upper level folder.
9
Exit
73
MYMEDIA
5 Control playback by using the following buttons.
USB STORAGE DEVICE
Page 1/1
Drive1
Q.MENU
002. - B02.mp3
Page 1/1
CH Page Change
Option Hide Exit
Butterfly_...
03:25
Music List
Setting Description
Changes the playing position.
Stops playing.
Returns to normal playback.
Pauses the media player.
Plays the previous/next le.
Reduces power consumption by adjusting peak screen
brightness. (If the screen shows a low battery message,
Energy Saving will be changed Maximum mode and will be
disabled)
Option Sets up the options of Music List.
Hide Hides the playback bar.
• Press the OK button to make the playback bar appear.
Exit Returns to the Music List screen.
74 MYMEDIA
OptionsforMusicList
1 Press the Q.MENU button.
2 Use the or button to move to a desired option and press the OK
button.
3 Use , , , or button to set up each item.
SetAudioPlay.
Setting Description
Repeat Selects repeat play.
Random Selects random play.
SetAudio.
You can change audio settings.
(Refer toAUDIO Settings on page 94.)
75
MYMEDIA
ViewingFiles
You can see document les stored on a connected device.
SupportedFileFormats
XLS, XLSX, DOC, DOCX, PPT, PPTX, TXT, PDF, HWP
Microsoft Ofce 97/2000/2002/2003/2007 version
Adobe PDF 1.0/1.1/1.2/1.3/1.4 version
Hangul: 97/2000/2002/2005/2007 version
• File Viewer realigns a document, so it may look different from what is
displayed on a PC.
• For documents that include images, the resolution may look lower during
the realigning process.
• If the document is large or has many pages, it may take longer to load.
• Unsupported fonts may be replaced by other fonts.
• The file viewer may not open for Office documents that contain many
high resolution images. In that case, reduce the image file size, save it
on a USB storage device and run the file viewer again or connect your
PC to the projector and open the file on your PC.
76 MYMEDIA
BrowsingFileList
1 Connect a USB storage device.
2 Press the USB button.
3 Use the , or button to select FileList and press the OK button.
4 Use the , , , or button to select the le you want and press
the OK button.
USB STORAGE DEVICE
Page 1/1
Page 1/1
Drive1 Drive5Drive3 Drive4
Drive2
CH Page Change
File List
DOC
Butterfly_...
06/09/2014
Go to root folder
Go to upper folder
Exit
1 3
6 7 8
2
5
4
Description
1
File List
2
Moves to the upper level folder.
3
Current page/Total no. of folder pages
4
Displays the remaining battery life.
5
Current page/Total no. of le pages
6
Moves to the top level folder.
7
Moves to the upper level folder.
8
Exit
77
MYMEDIA
5 Control playback by using the following buttons.
• Click GoPage then the pop-up window for selecting the number of
page appears. Input the page to move to the page you want.
• Press the VOL+, - button to zoom in or zoom out.
Press the OK button and then use the Up/Down/Left/Right buttons to
move to GoPage or Zoom.
ꔦQ.MENU
Go Page Zoom Option Hide Exit
Setting Description
Go
Page
Moves to the page you want.
Use the Up/Down/Left/Right buttons to select a page and
press the OK button.
Zoom Enlarges or reduces the document.
Option Sets up the options of File Viewer.
Hide Hides the menu.
• Press the OK button to make it appear.
Exit Returns to the File Viewer screen.
78 MYMEDIA
OptionsforFileList
1 Press the Q.MENU button.
2 Use , , , or button to set up each item.
SetFileViewerOption
Setting Description
Single
Page
Loading
On Loads and displays pages one by one. The initial
loading time is short but a content heavy page may
be displayed slowly.
Off Loads all pages of a le to memory before it starts to
display them. The initial loading time is long but you
can navigate pages quickly after loading is complete.
If a le is too large, it may fail to load all the pages.
Image
Quality
You can set the quality of the image included in the
document. The following three options are available for
the image quality: High, Medium, Low. Higher the image
quality, lower the display time.
Document
Align
Selects initial document align method.
File View settings are default, so close the currently opened document to
apply changes to the new document, if any.
79
3DFUNCTION
3DFUNCTION
3D technology uses different video frames for each eye to add depth to the
video.
WhileWatching3D
WARNING
• If you view 3D video or images too closely for a long period of time, your
eyesight may become worse.
• If you watch the projector or game screen for a long time with 3D
glasses on, you may experience dizziness or eye fatigue.
• People with chronic diseases (epilepsy, cardiovascular disease, blood
pressure-related diseases, etc.), pregnant women, and people with
serious motion sickness should avoid watching 3D video.
• People with stereo blindness, or with stereopsis problems, should also
avoid watching 3D video content. It may cause double vision or visual
discomfort.
• People with strabismus, amblyopia, or astigmatism may have difficulty
perceiving video depth and may be fatigued easily due to double vision
or other ailments. It is recommended to rest more frequently than other
viewers.
• Because 3D can be recognized as real, some viewers may get surprised
or overexcited.
• Do not watch 3D images near fragile objects or any objects that can be
knocked over easily.
• Take care not to injure yourself as you may subconsciously try to move
away from the life-like 3D images.
80 3DFUNCTION
• Warningaboutphotosensitivityseizures
– Some users may experience a seizure or other abnormal symptoms
when they are exposed to a ashing light or particular patterns from
a video game. If anyone in your family has a history of epilepsy or
has ever experienced any kind of seizure, please consult your doctor
before viewing 3D images.
If you experience one of the following symptoms while watching a 3D
video, stop watching the 3D video immediately and take a rest.
– Dizziness, switched eyesight, twitching of the eye or facial muscles,
involuntary movements, cramp, loss of consciousness, confusion,
loss of sense of direction, or nausea. If the symptom does not
disappear, please consult your doctor.
• You can reduce the risk of photosensitive seizures by taking the
following preventive measures.
– Take a rest of 5 to 15 mins. for every 1 hour of viewing.
– If vision varies between each eye, correct the variation before
beginning to watch a 3D video.
– Ensure that the 3D video is directly in front of you, at eye level.
– You should stop watching if you experience a headache, fatigue or
dizziness.
– Do not view 3D images for a long period of time when you are tired
or ill.
81
3DFUNCTION
CAUTION
• Extra special care is required for children watching a 3D video.
WhenWatching3DVideo
• Prevent children of 5 years or younger from watching a 3D video. It may
impair the development of their eyes.
• Children 10 years old or younger are still developing their eyesight and
may have an excessive tendency to touch or jump at the screen. Adult
guidance and supervision is recommended.
• Since the distance between the eyes is narrower for children than in
adults, children tend to notice a greater difference in the images seen by
each eye. Therefore, even while watching the same 3D video, children
may have a greater depth perception than adults.
• Young people of 19 years old or younger may respond with sensitivity
to the light stimuli of 3D content. Excessive viewing when fatigued is not
recommended.
• Elderly viewers may have a reduced depth perception than younger
viewers. Avoid watching video nearer than the recommended distance.
• Watch 3D images within the optimum viewing angle and distance.
• If you are outside the viewing angle or distance, you may not be able to
see 3D images. You cannot view 3D images when you are lying down.
• You may see left and right images overlapped during projector
initialization after it is powered on. It may take some time for
optimization.
• It may take some time for the 3D image to look normal after you turn
your eyes away from the screen and look back at the 3D image.
• It may flicker slightly while watching 3D images under a 3 wavelength
lamp fluorescent light (50 Hz to 60 Hz) or near windows. If so, it is
recommended to block the sun light with a curtain and to dim the lights.
• The 3D glasses must be DLP-LINK (DLP Ready) type.
• You may not be able to watch 3D properly if there is an obstacle
between the projector and 3D glasses.
• Install the 3D projector as far as possible from other devices.
• If a future 3D broadcasting format that is not supported by this projector
becomes the standard, an additional device such as a set-top box may
be required.
82 3DFUNCTION
Pleasecheckthefollowingwhenusing3Dglasses.
• Do not use 3D glasses as ordinary glasses, sunglasses or protective
goggles.
– If you do so, this may cause injury.
• Do not store 3D glasses in very hot or very cold conditions. If you do,
this may cause them to become distorted. Do not use distorted glasses.
• Do not drop 3D glasses or allow them to come into contact with other
objects.
– This may cause product malfunction.
• The lenses of 3D glasses are easily scratched. Use a soft clean cloth
when cleaning them.
• Foreign particles on the cloth may cause scratches.
• Do not scratch the surface of the 3D glasses' lenses with sharp objects
or wipe them with chemicals. If the lenses get scratched, images may
not look normal when viewing 3D.
83
3DFUNCTION
RequirementsforWatching3DImages
* Optimum viewing angle: Top/Bottom/Left/Right 9°
Recommended viewing distance: 3 m to 5 m (with Adaptor)
1 m to 2 m (without Adaptor)
Recommended screen size: 101 cm
* Watching 3D videos should be done in dark room environments only.
• The pairing with the DLP-LINK glasses is affected by the intensity of
light reflected from the screen.
Therefore, the pairing with DLP-LINK glasses may not work properly
if the light reflected from the screen is not bright enough, such
as when the surrounding area is bright, the screen is big, or the
maximum energy saving mode is enabled.
• Some menus may not work while playing a 3D video.
• You can only watch a 3D video properly when the 3D video format
option has been selected on the projector.
NOTE
84 3DFUNCTION
UsingtheDLP-LINK(DLP-Ready)TypeGlasses
1 While watching 3D images from the projector, press buttons on the
glasses.
2 When you press the button, the glasses icker while synchronizing with
the 3D images. (The ickering is a unique operation method of DLP-
LINK type glasses. It may be different depending on the glasses type.)
3 If the glasses icker or problems occur while watching 3D, rst turn
the lights off to make the room darker. Contact your projector seller for
queries about the glasses.
Toview3Dimages
3D imaging is a technology that utilizes the slight difference in left/
right eyes to make the images on the projector appear just like real-life
3-dimensional space.
1 Play a 3D-image title or tune to a 3D channel.
2 Press the 3D button to activate 3D.
3 Turn on the 3D glasses and put them on.
4 While viewing 3D images, press the 3D button on the remote control to
end 3D image viewing.
5 Press the L/R button to switch the playing direction of an image. Select
a screen with better 3D display quality.
– If you press the 3D button during viewing, it returns to 2D.
* Depending on the input signal, the available 3D type may differ.
85
3DFUNCTION
Supported3DMode
Signal
Resolu-
tion
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Supported3D
Formats
HDMI
720p 1280 x
720
89.9 / 90 59.94 / 60 Frame Packing
45 60 Side by side (half),
Top and Bottom
1080i 1920 x
1080 33.7 60 Side by side (half),
Top and Bottom
1080p 1920 x
1080
53.95 / 54 23.98 / 24 Frame Packing
67.5 60
Side by side (half),
Top and Bottom,
Single Frame
Sequential
27 24 Side by side (half),
Top and Bottom
33.7 30 Side by side (half),
Top and Bottom
USB 1080p 1920 x
1080 33.75 30
Side by side, Top
and Bottom, MPO,
JPS (Photo)
RGB 1080p 1920 x
1080 67.5 60 Side by side(half),
Top and Bottom
DTV
720p 1280 x
720 45 60 Side by side(half),
Top and Bottom
1080i 1920 x
1080 33.7 60 Side by side(half),
Top and Bottom
86 CUSTOMIZINGSETTINGS
CUSTOMIZINGSETTINGS
SETTINGS
1 Press the SETTINGS button.
2 Use the , , , or button to select the desired item and press
the OK button.
3 Use the , , , or button to set up the desired item and press
the OK button.
4 Press the EXITbutton when completed.
Menu Description
PICTURE Adjusts the image quality for optimal viewing.
AUDIO Adjusts the sound quality and volume level.
CHANNEL Sets up and edits a channel.
TIME Sets the time and time-related features.
WIRELESS Wireless-related features.
LOCK Locks or unlocks a channels or a programs.
OPTION1 Customizes the general settings.
OPTION2 Customizes the settings related the projector.
INPUT Selects the desired input source.
MYMEDIA Accesses photo, music, movie, and document les.
87
CUSTOMIZINGSETTINGS
PICTURESettings
1 Press the SETTINGS button.
2 Use the , , , or
button to select PICTURE and
press the OK button.
3 Use the , , , or
button to set up the desired
item and press the OK button.
– To return to the previous
menu, press the button.
4 Press the EXIT button when
completed.
•ꕊ Energy Saving : Minimum
•Picture Mode : Standard
•Contrast 100
•Brightness
50
•Sharpness
10
•Color 55
•Tint 0
RG
ꔂ Move ꔉ OK
PICTURE
The available picture settings are described as follows.
Item Description
Energy
Saving
Reduces power consumption by adjusting peak screen
brightness. (If the screen shows a low battery message,
Energy Saving will be changed Maximum mode and will
be disabled)
Mode
Minimum/
Medium/
Maximum
Applies the pre-set EnergySaving mode.
88 CUSTOMIZINGSETTINGS
Item Description
PictureMode Selects the picture mode optimized for the viewing
environment or the program.
You can also customize advanced options for each
mode.
Mode
Vivid Maximizes the visual effect of video.
Heightens contrast, brightness and
sharpness to display vivid images.
Standard Displays images in standard levels of
contrast, brightness and sharpness.
Cinema Optimizes the image for a movie.
Sport Optimizes the image for sports by
emphasizing primary colors and dynamic
actions.
Game Optimizes the image for playing games on
fast-moving screens.
Expert1/2 Menu for adjusting picture quality that
allows experts and amateurs to enjoy the
best Projector viewing.
– Expert mode is for picture tuning
professionals to control and ne-tune
using a specic image. For normal
images, the effects may not be
dramatic.
Contrast Adjusts the difference between bright and dark regions
of the screen.
Brightness Adjusts the overall screen brightness.
Sharpness Adjusts the sharpness of the borders between bright and
dark.
Horizontal and Vertical Sharpness are available only in
Expert1/2.
Color Adjusts the intensity of all colors.
Tint Adjusts the balance between red and green levels.
Advanced
Control
Customizes the advanced settings.
89
CUSTOMIZINGSETTINGS
Item Description
Picture
Option
Sets optional settings.
PictureReset Resets values customized by the user.
Each picture mode is reset. Select the picture mode you
wish to reset.
AspectRatio Resizes the picture.
Screen
(RGB-PC)
Adjusts the picture quality of RGB-PC input.
Option
Resolution Available resolutions are 768 resolution
(1024 x 768/ 1280 x 768/ 1360 x 768,
60 Hz) and 1050 resolution (1400 x 1050/
1680 x 1050, 60 Hz).
Auto
Config.
Provides optimized picture quality by
automatically calibrating the mismatch of
horizontal width and picture shake caused
by clashes between the internal settings
of the projector and various PC graphic
signals.
Position Moves the image up/down/left/right.
Size Changes the screen size.
Phase Makes the picture look clear by removing
horizontal noise.
Reset Restores all the settings to the factory
default.
90 CUSTOMIZINGSETTINGS
AdvancedControl
Item Description
Dynamic
Contrast
Adjusts contrast and color to the optimal level
according to the screen’s brightness.
DynamicColor Adjusts colors for more natural-looking colors.
ColorGamut Selects the range of colors that can be expressed.
• Standard: Displays the original colors of an input
signal regardless of the display features.
• Wide: Makes use of the display's rich colors.
SkinColor Skin color spectrum can be separately set to
implement the skin color as dened by the user.
SkyColor Sky color is set separately.
GrassColor Natural color spectrum (meadows, hills, etc.) can be
separately set.
Gamma Sets the gradation curve according to the output of the
picture signal in relation to the input signal.
* Depending on input signal or other picture settings, the range of detailed
items for adjustment may differ.
91
CUSTOMIZINGSETTINGS
ExpertControl
Item Description
Dynamic
Contrast
Adjusts contrast and color to the optimal level
according to the screen’s brightness.
ColorGamut Selects the range of colors that can be expressed.
• Standard: Displays the original colors of an input
signal regardless of the display features.
• Wide: Makes use of the display's rich colors.
Edge
Enhancer
Shows clearer and distinctive yet natural edges of the
video.
ExpertPattern Patterns used for expert adjustment.
ColorFilter Filters a specic color spectrum in RGB colors to ne-
tune color saturation and hue accurately.
Color
Temperature
In Expert mode, you can customize the options of
each mode.
Gamma:Select1.9, 2.2, or2.4.
a.Method:2Points
– Pattern: Inner, Outer
– Points: Low, High
– Red/Green/Blue: Adjustable range -50to +50.
– Applytoallinputs: The values of the Color
Temperature is applied to all the input modes.
b.Method:20PointIRE
– Pattern: Inner, Outer
– IRE(Institute of Radio Engineers) is the unit
indicating the size of a video signal and can be
set to 0, 5, 10, 15, ... 100. You can ne-tune for
each setting as shown below.
– Luminance: The adjustment range is 50 to 500.
– Red/Green/Blue: The adjustment range is -50
to +50.
– Applytoallinputs: The values of the Color
Temperature is applied to all the input modes.
92 CUSTOMIZINGSETTINGS
Item Description
Color
Management
System
Adjusts Red/Green/Blue/Cyan/Magenta/Yellow colors.
Allows an expert to adjust the tint using a test pattern.
Six colors (Red/Green/Blue/Cyan/Magenta/Yellow) can
be selectively adjusted without affecting other colors.
You may not see colors change on a normal picture
even after adjustment.
– Saturation Red/Green/Blue/Yellow/Cyan/
Magenta,
Tint Red/Green/Blue/Yellow/Cyan/Magenta,
Luminance Red/Green/Blue/Yellow/Cyan/
Magenta : The adjustment range is -30 to +30
each.
* Depending on input signal or other picture settings, the range of detailed
items for adjustment may differ.
93
CUSTOMIZINGSETTINGS
PictureOption
Item Description
NoiseReduction Reduces screen noise in the video.
MPEGNoise
Reduction
Eliminates noise generated while creating digital
picture signals.
BlackLevel Adjusts the brightness or darkness of the screen
to suit the black level of the picture input using the
degree of darkness (black level) of the screen.
RealCinema Optimizes the screen for movie viewing.
Color
Temperature
Adjusts the overall color of the screen to suit your
preference.
Select Warm, Cool, Medium, or Natural.
94 CUSTOMIZINGSETTINGS
AUDIOSettings
1 Press the SETTINGS button.
2 Use the , , , or
button to select AUDIO and
press the OK button.
3 Use the , , , or
button to set up the desired
item and press the OK button.
– To return to the previous
menu, press the button.
4 Press the EXIT button when
completed.
•Sound Mode : Standard
•Sound Effect
•Auto Volume : Off
ꔂ Move ꔉ OK
AUDIO
The available sound settings are described as follows.
Item Description
Sound
Mode
Sets the sound mode.
Mode
Standard Suitable for all types of video.
News/Music/
Cinema/
Sport/Game
Sets audio optimized for a specic genre.
95
CUSTOMIZINGSETTINGS
Item Description
Sound
Effect
The user can select various sound effects.
Mode
ClearVoiceII Makes the voice from the projector crisp
and clear.
Virtual
Surround
LG’s proprietary audio processing
technology allows 5 channel-like surround
sound from two speakers.
• When ClearVoiceIIis set to on, Virtual
Surround cannot be selected.
Equalizer Adjusts the volume to a level of your
choice using the Equalizer.
• Audio-band (100Hz/ 300Hz/ 1kHz/
3kHz/ 10kHz) can be adjusted from
-10 to 10.
• Reset: Resets voice options that the
user has changed.
Balance Adjusts the balance of the left and right
speakers.
Reset Initialize the applied effect under the
SoundEffect menu.
Auto
Volume
Automatically adjusts the volume level.
96 CUSTOMIZINGSETTINGS
CHANNELSettings
1 Press the SETTINGS button.
2 Use the , , , or
button to select CHANNEL
and press the OK button.
3 Use the , , , or
button to set up the desired
item and press the OK button.
– To return to the previous
menu, press the button.
4 Press the EXIT button when
completed.
•Auto Tuning
•Manual Tuning
•Channel Edit
ꔂ Move ꔉ OK
CHANNEL
The available channel settings are described as follows.
Item Description
AutoTuning Remembers a channel which is currently broadcasting.
You should use this function when you move to another
house or move the Projector to other place. It must
be used while the antenna is connected and there are
channel broadcasting signals.
• Channels are not registered properly unless the
antenna/cable is connected correctly.
• AutoTuning only finds programs that are currently
broadcasting.
• If LockSystem is turned On, a pop-up window will
appear asking for password.
Manual
Tuning
Adjusts channels manually and saves the results.
For digital broadcasting, signal strength, etc. can be
checked.
ChannelEdit Edits the saved channels.
Set as favorite channel, block/unblock channel, delete
channel etc. of the selected channel.
97
CUSTOMIZINGSETTINGS
TIMESettings
1 Press the SETTINGS button.
2 Use the , , , or
button to select TIME and
press the OK button.
3 Use the , , , or
button to set up the desired
item and press the OK button.
– To return to the previous
menu, press the button.
4 Press the EXIT button when
completed.
•Clock
•Off Time : Off
•On Time : Off
•Sleep Timer : Off
•Auto Off : 60 min.
•Automatic Standby : Off
ꔂ Move ꔉ OK
TIME
The available time settings are described as follows.
Item Description
Clock Checks or changes the time while watching projector.
Mode
Auto Synchronizes the projector clock to the
digital time information sent by the TV
station.
Manual Sets the time and date manually if the auto
setup does not correspond to the current
time.
98 CUSTOMIZINGSETTINGS
Item Description
OffTime/On
Time
Sets the time to turn on or off the projector
automatically. To use this feature, you should set the
current time and date in advance.
To use this feature, set the time correctly.
If you do not want to set OffTime/OnTime, select Off
in Repeat.
• If you set both OffTime and OnTime features to
the same time, the Off time feature overrides the
On time feature.
• If you do not press any button within two hours
after the projector is turned on by the OnTime
feature, the projector enters standby mode
automatically.
NOTE
SleepTimer Turns off the Projector after a preset number of minutes.
To cancel the SleepTimer, select Off.
AutoOff If there is no input signal or button press, the projector
automatically turns off after the preset time has elapsed.
Automatic
Standby
Turns off the projector automatically after a set period of
time if there is no button input on the projector.
99
CUSTOMIZINGSETTINGS
WIRELESSSettings
1 Press the SETTINGS button.
2 Use the , , , or
button to select WIRELESS
and press the OK button.
3 Use the , , , or
button to set up the desired
item and press the OK button.
– To return to the previous
menu, press the button.
4 Press the EXIT button when
completed.
•SCREEN SHARE : [PJTR][LG]PH550[0000]
•Group
•Channel
•Bluetooth : Off
•Search Device
•List of registered devices
•AV Sync. Adjust
ꔂ Move ꔉ OK
WIRELESS
The available wireless settings are described as follows.
Item Description
SCREEN
SHARE
The SCREEN SHARE displays the screen of the
connected device.
• You can check the SCREEN SHARE's ID.
Mode
Group This is the Group setting for each device
supporting the SCREEN SHARE feature.
When the wireless connection is weak or
unstable, adjust the Group setting to correct
the problem.
Channel You can change the channel used for
wireless connections.
• SearchChannels: Select channel
searching methods.
– Auto: The projector searches for
available channels and automatically
selects the least used channel.
– Manual: You can select a channel
manually.
• Channel: This is shown when Search
Channels is set to Manual. It allows you
to specify a channel number to use.
100 CUSTOMIZINGSETTINGS
Item Description
Bluetooth Sound is output through the Bluetooth headset.
First, set Bluetooth to On.
Item
Search
Device
Search for the device to connect to.
Listof
registered
devices
Connected devices are saved in the List
ofregistereddevices. The saved list of
registered devices can be displayed.
AVSync.
Adjust
When the video and the sound are not
synchronized correctly, you can manually
adjust the synchronization.
101
CUSTOMIZINGSETTINGS
LOCKSettings
1 Press the SETTINGS button.
2 Use the , , , or
button to select LOCK and
press the OK button.
– To enter the LOCK menu,
enter the preset 4-digit
password. The initial
password is set as 0000.
3 Use the , , , or
button to set up the desired
item and press the OK button.
– To return to the previous
menu, press the button.
4 Press the EXIT button when
completed.
•Set Password
•Lock System : Off
•Block Channel
•Movie Rating
•TV Rating-Children
•TV Rating-General
•Downloadable Rating
ꔂ Move ꔉ OK
LOCK
The available lock settings are described as follows.
Item Description
Set
Password
Sets or changes projector password.
• The initial password is set as 0000.
102 CUSTOMIZINGSETTINGS
Item Description
Lock
System
Locks the selected channel or external input.
First set LockSystem to On.
Item
Block
Channel
Blocks the programs that contain inappropriate
contents for children. The programs can be
selected but the screen is blank and the audio
is muted. To watch a locked program, enter
the password.
Movie
Rating
Blocks the movies that are only broadcasted
on the TV and contain inappropriate contents,
based on the Motion Picture Association of
America (MPAA) rating.
• G : Generalaudiences
All ages admitted
• PG : Parentalguidancesuggested
Some material may not be suitable for
children
• PG-13 : Parentsstronglycautioned
Some material may be inappropriate for
children under 13
• R : Restricted
Under 17 requires accompanying parent or
adult guardian
• NC-17 : Noone17andunderadmitted
• X : Adultonly
103
CUSTOMIZINGSETTINGS
Item Description
Lock
System
Item
TVRating-
Children
Blocks the children’s TV programs that parents
do not want their children to watch. To block
other TV programs, you should set the TV
Rating-General feature.
• Age TV-Y (All children, including children
from ages 2-6), TV-Y7 (Directed to older
children, suitable for children age 6 and
above)
• FantasyViolence TY-Y7 (Directed to older
children - Fantasy violence, suitable for
children age 6 and above, containing more
intense or combative fantasy violence)
TVRating-
General
Blocks the TV programs that you want based
on the ratings by using the Parental Control
Function (V-Chip).
The V-Chip electronically reads TV program
ratings and allows parents to block program
that are unsuitable for children.
• Age TV-G (General audience, suitable for all
ages) TV-PG (Parental guidance suggested,
containing material that are unsuitable for
younger children) TV-14 (Parents strongly
cautioned, containing material that are
unsuitable for children age 14 and under)
TV-MA (Mature audience only, unsuitable
for children age)
• Dialogue (suggestive dialogue) TV-PG or
TV-14
• Language (coarse language)TV-PG, TV-14,
or TV-MA
• Sex (sexual situation) TV-PG, TV-14, or
TV-MA
• Violence TV-PG, TV-14, or TV-MA
Down-
loadable
Rating
This function operates only when TV has
received Region5 Rating data. The name of
the rating option may differ.
Input
Block Block the input sources.
104 CUSTOMIZINGSETTINGS
Item Description
KeyLock Locks control buttons on projector.
• KeyLock function remains intact even in case of power
outage or when the power cord is removed from the wall
socket.
• KeyLock function can only be set by remote control, and
not by the button on the projector.
• If you select On: You can turn the projector on only with
the Power button if you have turned the projector off using
the remote control. If you press a button on the joystick
button while watching video, the message KeyLockis
displayed.
105
CUSTOMIZINGSETTINGS
OPTION1Settings
1 Press the SETTINGS button.
2 Use the , , , or
button to select OPTION1 and
press the OK button.
3 Use the , , , or
button to set up the desired
item and press the OK button.
– To return to the previous
menu, press the button.
4 Press the EXIT button when
completed.
•Language
•Caption : Off
•3D Mode
•Auto Input Search : Off
•DivX(R) VOD
•Initial Setting
•Mode Setting : Standard
ꔂ Move ꔉ OK
OPTION 1
The available option 1 settings are described as follows.
Item Description
Language Selects a desired Menu Language.
Caption View subtitles when the TV station provides subtitled
programing. Program subtitles work only on digital/analog
broadcasts.
Change Caption to On and select caption setting.
Mode CC1-4 (Closed Captioning) / Text1-4
Displays the audio portion of a TV program
as text on the TV screen. CC1is the most
common mode in use.
Field 1 data channels: two Captions (CC1,
CC2), two Text (Text1, Text2).
Field 2 data channels: two Captions (CC3,
CC4), two Text (Text3, Text4).
Service1-6
This is only available for the digital
broadcasting system.
106 CUSTOMIZINGSETTINGS
Item Description
Caption Digital
Option
Set up the size and color of the subtitles
on DigitalOption. Please select Setby
Program or Custom.
Select Custom to adjust minute options such
as the subtitles’ size and color.
Item
Size Selects the wordsize.
Font Selects a typeface for the text.
TextColor Selects a color for the text.
Text
Opacity
Adjusts the opacity for the text
color.
BgColor Selects a color for the
background color.
Bg
Opacity
Adjusts the opacity for the
background color.
EdgeType Selects an edge type.
Edge
Color
Selects a color for the edges.
3DMode Adjusts various aspects of 3D imaging.
Mode
3DPicture
Correction
Switches left/right images of 3D video.
AutoInput
Search
Automatically searches for and displays the input signal
type when it is received. It is available only with external
inputs (RGB-PC, HDMI, AV, and Component).
DivX(R)
VOD
Sets DivX related settings.
107
CUSTOMIZINGSETTINGS
Item Description
Initial
Setting
Deletes all optional settings and returns to initial default
mode. Once initialization is complete, the projector will turn
off and on by itself.
• When LockSystem is in place, a pop-up window
appears and asks for password.
• Do not turn off the power during initialization.
Mode
Setting
Selects Standard or StoreDemo.
When in use in home, please select Standard.
StoreDemo mode is for store display.
108 CUSTOMIZINGSETTINGS
OPTION2Settings
1 Press the SETTINGS button.
2 Use the , , , or
button to select OPTION2 and
press the OK button.
3 Use the , , , or
button to set up the desired
item and press the OK button.
– To return to the previous
menu, press the button.
4 Press the EXIT button when
completed.
•Keystone 0
- +
•Auto Keystone : On
•PJT Mode : Front
•High Altitude : Off
•Blank Image : Blue
•Auto Power : Off
•Self Diagnosis
ꔂ Move ꔉ OK
OPTION 2
The available option 2 settings are described as follows.
Item Description
Keystone To prevent the screen image from becoming trapezoidal,
Keystone adjusts the top and bottom width of the image if
the projector is not set at a right angle to the screen.
Auto
Keystone
Auto Keystone provides a rectangular screen image by
automatically adjusting the Keystone number when there
is a trapezoidal screen image caused by tilting of the
projector.
Item
On Automatically adjusts the Keystone
number.
Off Manually adjusts the Keystone number.
PJTMode This function turns the projected image upside down or
ips horizontal.
• Select Rear when projecting from the back of the
transparent screen purchased separately.
• Select FrontCeiling when installing the product on the
ceiling.
• When PJTMode is Rear/ FrontCeiling, the left/right
of the speaker changes automatically.
109
CUSTOMIZINGSETTINGS
Item Description
High
Altitude
If the projector is used at an altitude higher than 1200
meters, turn this on.
Otherwise, the projector may overheat or its protection
function may be activated. If this happens, turn the
projector off and then on again after waiting for several
minutes.
BlankImage Selects a background for blank Image.
AutoPower Makes the projector turn on automatically when the
adaptor plug is inserted.
Item
On When the AC/DC plug is connected to the
projector, it turns on automatically.
Off When the AC/DC plug is connected to the
projector, it goes into standby mode.
Self
Diagnosis
Troubleshoots functional problems that can arise while
using the product.
110 CONNECTINGDEVICES
CONNECTINGDEVICES
You can connect various external devices to the projector.
Computer/Notebook VideoDVD
DigitalDevice
USB
Headphones GameConsole
MobilePhone
HDMI - page 111
Component - page 112
Composite (AV) - page 112
RGB - page 114
USB Device - page 55
Headphone - page 116
Mobile Phone (MHL/Slimport) - page 117
111
CONNECTINGDEVICES
ConnectingtoHD
Receiver,DVD,VCR
Player,orExternal
Devices
Connect an HD receiver, DVD,
VCR player, or External Devices
to the projector and select an
appropriate input mode.
HDMIConnection
With an HDMI cable, you can
enjoy high quality picture and
sound.
Using a HDMI cable, connect the
port of the projector
to the HDMI output port of the
device to connect. Both video and
audio are output at the same time.
Press the INPUT button on the
remote control to select HDMI.
* Optional
Extras
+'0,
HDMItoDVIConnection
Using an HDMI to DVI cable,
connect the projector's
port to the DVI OUT
port.
To output audio, use an audio
cable for connection.
Press the INPUT button on the
remote control to select HDMI.
* Not
provided
* Optional
Extras
DVI OUT AUDIO OUT
112 CONNECTINGDEVICES
Composite(AV)
Connection
Connect the output ports of an
external device and the AVIN
ports of the projector using an AV
cable. Press the INPUT button on
the remote control to select AV.
Check whether cables of the same
color are connected properly.
* Not
provided
* Accessories
$9287
/HIW 5LJKW
$8',2287
Yellow Yellow
Yellow
White White
White
Red Red
Red
ComponentConnection
You can enjoy a video by
connecting the Component port
of an external device to the RGB
INport of the projector. Press
the INPUT button on the remote
control to select Component.
Check whether cables of the same
color are connected properly.
* Optional
Extras
(Video)
* Accessories
(Audio)
* Optional
Extras
(Video)
* Not
provided
(Audio)
$9287
/HIW
<3%35
5LJKW
$8',2287
Red Red Red
Blue Blue Blue
Green Green Green
White
Red
$9287
/HIW 5LJKW
$8',2287
White White
Red Red
Yellow
113
CONNECTINGDEVICES
ConnectingaPC
The projector supports Plug and
Play. Your PC will automatically
detect the projector and requires
no driver installation.
HDMIConnection
Using an HDMI cable, connect the
port of the projector
to the HDMI output port of your
PC. Both video and audio are
output at the same time.
Press the INPUT button on the
remote control to select HDMI.
* Optional
Extras
+'0,
HDMItoDVIConnection
Using an HDMI to DVI cable,
connect the projector's
port to the DVI OUT
port.
To output audio, use an audio
cable for connection.
Press the INPUT button on the
remote control to select HDMI.
* Not
provided
* Optional
Extras
DVI OUT AUDIO OUT
114 CONNECTINGDEVICES
RGBConnection
Connect the PC output and the
PC video input port of the projector
with the RGB cable.
For audio signal, connect the PC
and the projector with an optional
audio cable.
Press the INPUT button on the
remote control to select RGB-PC.
* Not
provided
* Optional
Extras
* Accessories
Yellow
White
Red
White
Red
$8',22875*%2873&
You can connect the audio cable
without using a gender as shown
in the illustration above.
* Optional
Extras
* Optional
Extras
$8',22875*%2873&
115
CONNECTINGDEVICES
ConnectingaLaptop
You can connect the projector to a
laptop to use various functions.
HDMIConnection
Using an HDMI cable, connect the
port of the projector
to the HDMI output port of your
laptop. Both video and audio are
output at the same time.
Press the INPUT button on the
remote control to select HDMI.
* Optional
Extras
+'0,
The table below shows examples
of switching the output. For
more information, refer to the
ExternalOutput, Connectingto
anExternalMonitor, or similar
sections of the owner's manual of
your computer.
Brand Switching
Output
NEC Fn + F3
Panasonic Fn + F3
Toshiba Fn + F5
IBM Fn + F7
Sony Fn + F7
Fujitsu Fn + F10
LG Fn + F7
Samsung Fn + F4
Macintosh Adjust the control
panel to enable
mirroring after
start-up.
116 CONNECTINGDEVICES
Connectingto
Headphones
You can listen to the audio through
a headphone.
* Not
provided
117
CONNECTINGDEVICES
UsingtheMirroringFunctionofaMobile
Phone
MHL/SlimportConnection
You must use a HDMI adapter to connect your cell phone to the projector
and to output images and sound from your cell phone to the projector.
The compatible HDMI adapters are different, depending upon your cell
phone type.
Therefore, purchase an appropriate MHL or Slimport adapter.
(To nd out whether your device is MHL/Slimport-certied, please contact
your device manufacturer.)
* Optional Extras
• When you connect a mobile phone to the port, you can
see the mobile phone screen through a projector.
– This only applies to mobile phones that support MHL/Slimport.
– You can use the remote control for some applications.
• Disconnect the MHL/Slimport cable from the projector when:
– The MHL/Slimport function is disabled.
– Your mobile device is fully charged in standby mode.
NOTE
118 MAINTENANCE
MAINTENANCE
Clean your projector to keep it in optimal condition.
Cleaning
CleaningtheLens
If there is any dust or staining on the lens surface, you must clean the lens.
Use an air spray or a cleaning cloth to clean the lens.
To remove dust or stains, use an air spray or apply a small amount of
cleaning agent onto a swab or soft cloth to lightly rub the lens.
Please be aware that liquid may ow into the lens if the product is sprayed
directly onto the lens.
CleaningtheProjectorCase
To clean the projector case, rst unplug the power cord.
To remove dust or stains, use only a dry, lint-free, nonabrasive cloth to
polish the lens.
Do not use alcohol, benzene, thinners, or other chemicals, which may
damage the case.
119
SPECIFICATIONS
SPECIFICATIONS
MODEL PH550(PH550-NA)
Resolution
(Pixel) 1280 (Horizontal) × 720 (Vertical)
Aspectratio 16:9 (Horizontal:Vertical)
Panelsize 7.93 mm
Projection
distance(Video
size)
0.77 m to 3.08 m (63.5 cm to 254.0 cm)
Ratioof
upward
projection
100 %
Workingrange
oftheremote
control
6 m
Videoinput NTSC M
AC-DCAdaptor 19.0 V , 2.53 A
(Adaptor Input 100-240 V @ 50/60 Hz)
AudioOutput 1 W + 1 W
Receptiontype ATSC / NTSC-M
Reception
channels
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69,
CADTV 1-135
External
Antenna
Impedance
75 Ω (VHF/ UHF)
Height 44 mm (without foot), 48 mm (with foot)
Width 174 mm
Depth 116 mm (without tunner), 126 mm (with tunner)
Weight 650 g
USBDevice 5 V, 0.5 A (Max.)
120 SPECIFICATIONS
MODEL PH550(PH550-NA)
Operation
environment
Temperature
Operation 0 °C to 40 °C
Storage -20 °C to 60 °C
RelativeHumidity
Operation 0 % to 80 %
Storage 0 % to 85 %
* Use only power supplies listed in the user instructions.
* Contents in this manual may be changed without prior notice due to
upgrade of product functions.
121
SPECIFICATIONS
SupportedRGB-PC/HDMI(PC)Mode
Resolution HorizontalFrequency
(kHz)
VerticalFrequency
(Hz)
640 x 350 31.468 70.09
720 x 400 31.469 70.08
640 x 480 31.469 59.94
800 x 600 37.879 60.31
1024 x 768 48.363 60.00
1152 x 864 54.348 60.053
1280 x 720 45 60
1280 x 1024 63.981 60.020
1440 x 900
55.935 59.888
1400 x 1050
65.317 59.979
1600 x 900
60 60
1680 x 1050
65.29 59.954
1920 x 1080
67.5 60
• If an invalid signal is input into the projector, it will not be displayed
properly on the screen or a message such as NoSignal or Invalid
Format will be displayed.
• The projector supports the DDC1/2B type as the Plug and Play function
(Auto-recognition of PC monitor).
• PC synchronization signal types supported: Separate type
synchronization.
• In PC mode, 1280 x 720 is recommended for the best picture quality.
122 SPECIFICATIONS
SupportedHDMI/DVI-DTVMode
Resolution HorizontalFrequency
(kHz)
VerticalFrequency
(Hz)
480p
31.47
31.47
31.50
60
59.94
60
720p 45.00
44.96
60.00
59.94
1080i
33.75
33.72
60.00
59.94
1080p
67.500
67.432
27.000
26.97
33.75
33.71
60
59.939
24.000
23.976
30.000
29.97
• To provide the best picture quality, a 1280 x 720 (720p) resolution is
recommended.
Componentportconnectinginformation
Signal Component
480i o
480p o
720p / 1080i o
1080p o
(60 Hz only)
123
SPECIFICATIONS
OpenSourceSoftwareNoticeInformation
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost
of media, shipping, and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date
on which you purchased the product.
