Philips AS140/37 User Manual
Displayed below is the user manual for AS140/37 by Philips which is a product in the Docking Speakers category. This manual has pages.
Related Manuals
Register your product and get support at
www.philips.com/welcome
AS140
User manual
1
English
EN
Contents
1 Important 2
Safety 2
Important Safety Instructions 2
2 Your Docking System for
Android™ 3
Introduction 3
What's in the box 3
Overview of the docking system 4
3 Get started 6
Connect power 6
Turn on 6
Switch to standby mode 6
Select a source 6
4 Play and charge 7
Compatible with Android™ 7
Play audio through manual Bluetooth
connection 7
Play audio through auto Bluetooth
connection with Philips DockStudio 8
Install DockStudio app onto
Android-powered device 9
Activate Bluetooth with
DockStudio app 11
Sync time automatically 14
Play audio with Philips Songbird 14
Install Songbird on Android-
powered device 14
Install Songbird on PC 16
Sync with PC through Philips
Songbird 16
Use more features with DockStudio 17
Set alarm timer 17
Set sleep timer 18
Listen to Internet radio 19
Dock and charge Android-powered
phone 20
Dock Android-powered phone 20
Use dock extension 20
Charge Android-powered phone 21
5 Listen to FM radio 22
Tune to FM radio stations 22
Store FM radio stations automatically 22
Store FM radio stations manually 22
Select a preset radio station 22
6 Other features 23
Set time 23
Set alarm timer 23
Set alarm 23
Select alarm source 23
Activate/deactivate alarm timer 23
Snooze alarm 23
Set sleep timer 23
Play audio from an external device 24
Adjust display brightness 24
7 Product information 25
Tuner 25
General information 25
8 Troubleshooting 26
About Bluetooth device 26
9 Notice 27
RSS 27
Disposal of your old product 27
2EN
1 Important
Safety
Important Safety Instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
h Do not install near any heat sources such
as radiators, heat registers, stoves, or
produce heat.
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
j Only use attachments/accessories
k Use only with the cart, stand, tripod,
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
l Unplug this apparatus during lightning
storms or when unused for long periods
of time.
m
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
n Apparatus shall not be exposed to
dripping or splashing.
o Do not place any sources of danger on
p This product may contain lead and
mercury. Disposal of these materials
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
Alliance: www.eiae.org.
q Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
3
English
EN
2 Your Docking
System for
Android™
Congratulations on your purchase, and
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this docking system, you can:
enjoy audio from your Android-powered
device;
charge your phone through micro USB
connector;
listen to FM radio;
wake up to buzzer alarm, radio, or audio in
your device; and
experience a variety of features brought by
Philips DockStudio and Philips Songbird
app.
What's in the box
Check and identify the contents of your
package:
Main unit
Power adapter
Dock extension
MP3 link cable x 1
Quick start guide
4EN
Overview of the docking
system
a SET TIME/PROG
Set clock.
Store FM radio stations.
b PRESET /
Select a preset radio station.
Adjust hour and hour format.
c SNOOZE/BRIGHTNESS
Snooze alarm.
Adjust display brightness.
d
Turn the docking system on or off .
Switch the system to standby mode.
e SOURCE
Select a source: FM tuner, Bluetooth
device, or MP3 link.
a
b
c
d
e
f
l
m
n
g
h
i
j
k
o
f Display panel
Show current information.
g AL1/AL2
Set alarm.
View alarm settings.
Activate or deactivate alarm timer.
h SLEEP
Set sleep timer.
i TUNING · /
Tune to FM radio stations.
Adjust minute.
j VOLUME +/-
Adjust volume.
k Dock for Android phone
Dock your Android-powered phone.
5
English
EN
l AL1/AL2 RADIO·BUZZ·DOCK
Select alarm source for Alarm 1 or
Alarm 2.
m MP3 LINK
Connect an external audio device.
n FM ANTENNA
Improve FM reception.
o DC IN
Connect power.
6EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or
underside of the device.
Risk of electric shock! When you unplug the power
adapter, always pull the plug from the socket. Never
pull the cord.
Note
The type plate is located on the bottom of the docking
system.
Connect the power adapter to:
the DC IN socket of the docking system.
the wall socket.
Turn on
Press .
» The docking system switches to the last
selected source.
Switch to standby mode
Press again to switch the docking system to
standby mode.
» [OFF] appears, and then the clock (if set) is
displayed.
Select a source
Press SOURCE repeatedly to select a source:
Bluetooth, FM tuner, or MP3 link.
Note
When an android-powered device is docked, the
system automatically switches to Bluetooth mode.
7
English
EN
4 Play and charge
With this docking system, you can enjoy audio
in two ways:
through manual Bluetooth connection;
through automatic Bluetooth connection
with Philips DockStudio app.
Compatible with Android™
To make full use of your docking system, your
Android-powered device should satisfy the
following requirements:
With Android operation system (Version
2.1 or above);
With Bluetooth software (Version 2.1 or
above); and
With a micro USB connector.
For other devices with micro USB connector
and Bluetooth function, you can still use the
docking system to do the the following:
Charge your device through the USB
connector;
Enjoy audio through Bluetooth.
Tip
Play audio through manual
Bluetooth connection
The docking system uses Bluetooth wireless
technology to stream music from your portable
device to the system.
Note
Before you connect a Bluetooth device to this
docking system, familiarize yourself with the Bluetooth
capabilities of the device.
Keep this docking system away from other electronic
devices that may cause interference.
1 On your docking system, press to
activate Bluetooth.
» The Bluetooth indicator blinks on the
display panel.
2 Turn on Bluetooth function of your
portable device.
Different devices may have different
way to activate Bluetooth.
8EN
3 Scan Bluetooth devices that can pair with
your portable device.
4 When [PHILIPS AS140] is displayed on
your device, select it to start connection.
» If connection is successful, you will hear
different Bluetooth icon on the top of
the screen.
5 Play audio with the media player of your
portable device.
» The audio comes out through the
docking system.
Tip
The effective operation range between the docking
system and the paired device is approximately 10
meters (30 feet).
Any obstacle between the system and the device can
reduce the operational range.
Play audio through auto
Bluetooth connection with
Philips DockStudio
Philips DockStudio app brings a suite of new
features to your docking system, including
automatic Bluetooth connection, Songbird
music player, Internet radio and a multi-function
alarm clock. To enjoy more features, you are
recommended to download and install the free
app.
9
English
EN
Install DockStudio app onto Android-
powered device
You have two ways to install Philips
DockStudio on your Android-powered device.
Install DockStudio app through QR code
Note
Make sure that your Android-powered device is
connected to the Internet.
Make sure that your device has a barcode scanner such
as "QR Droid". If not, download one from the Android
market.
1 Use the barcode scanner to scan the QR
code on the package or Quick Start Guide.
2 Follow the on-screen instructions to install
Philips DockStudio app.
3 When installation is complete, tap [Done]
(done).
» The DockStudio icon appears on your
portable device.
The Philips DockStudio app brings a suite of
cool, new features to your Philips DockStudio
docking speaker, including automatic Bluetooth
connection, Songbird music player,
worldwide Internet radio, sound settings
DockStudio
10 EN
Install DockStudio app through Android
Market
You can also search Philips DockStudio in the
Android Market directly, and then install the app.
Note
Make sure that your Android-powered device is
connected to the Internet.
Make sure that Android Market is available on your
Android-powered device.
DockStudio
1 Tap the "Android Market" icon on your
device.
2 Tap the search icon on the screen.
3 In the search bar, type in "Philips
DockStudio" to search the app.
4
Philips DockStudio to start downloading.
11
English
EN
5 Follow the on-screen instructions to install
the DockStudio app.
6 When installation is complete, tap Done
(done).
The Philips DockStudio app brings a suite of
cool, new features to your Philips DockStudio
docking speaker, including automatic Bluetooth
connection, Songbird music player,
worldwide Internet radio, sound settings
DockStudio
Activate Bluetooth with DockStudio
app
Philips DockStudio app helps to connect your
Android-powered device and docking system
through Bluetooth automatically.
Note
Make sure that your Android-powered device is
connected to the Internet.
First-time launch
1 On your docking system, press
repeatedly to select Bluetooth source.
» blinks on the display panel.
2 On the home screen of your device, tap
the DockStudio icon to launch the app.
» A prompt message asking you to
download Songbird appears.
DockStudio
12 EN
3 Tap [Cancel] (cancel).
» The device starts to scan Philips
devices that can be paired
automatically.
4 When [PHILIPS AS140] is displayed on
your device, select it to start connection.
» It may take a few seconds to complete
the connection.
» After Bluetooth connection, a different
Bluetooth icon can be found on the
top of the screen.
13
English
EN
5 Play audio with the media player of your
portable device.
» The audio comes out through the
docking system.
Next-time launch
Next time you launch the DockStudio app,
connect to the docking system through
Bluetooth as below.
1 Activate the Bluetooth function of your
docking system.
2 Launch Philips DockStudio and access its
menu.
3 Tap [Speaker Connection] (Speaker
Connection) to activate automatic
Bluetooth connection.
» It may take a few seconds to complete
the connection.
14 EN
4 Play audio on your portable device.
» The audio comes out through the
docking system.
Sync time automatically
After you activate Bluetooth connection
through Philips DockStudio, the docking system
synchronizes time with your Bluetooth-enabled
device automatically.
Play audio with Philips
Songbird
Philips Songbird is a simple, easy-to-use PC
program and Android app. It lets you discover,
play and sync your media from PC to your
Android-powered devices seamlessly.
Install Songbird on Android-powered
device
1 Tap the DockStudio icon on your Android-
powered device.
» The DockStudio menu is displayed.
DockStudio
15
English
EN
2 Tap [Songbird].
» You are requested to download
Songbird.
3 Follow the on-screen instructions to
download the app.
» Songbird is installed on your device.
4 After installation, tap [Open] (Open) to
access Songbird menu.
5 Select a track, and then tap to play music.
16 EN
Install Songbird on PC
1 Go to www.philips.com/songbird.
2 Search Songbird.
3 Download the latest Songbird application.
4 Follow on-screen instructions to install
Philips Songbird on your PC.
Sync with PC through Philips Songbird
Note
Make sure that you have turned on the USB storage.
1 On your PC, launch Philips Songbird.
2 Connect your Android-powered device to
PC with a USB cable. Wait until the device
is recognized by the Songbird.
» On Philips Songbird, the device is
displayed when it is recognized by the
PC.
songbird
»
device to Philips Songbird, a pop-up
screen appears. Select auto sync as
prompted.
» The device synchronizes with Philips
Songbird automatically.
If you didn't select auto sync, you can sync with
Songbird manually.
1 Select the device under Devices.
2 Select Manual or Auto.
3 Click Sync.
» If you have selected auto sync, auto
sync starts automatically when you
connect the device to the PC.
17
English
EN
Use more features with
DockStudio
With Philips DockStudio, you can also listen to
Internet radio, set alarm timer and sleep timer.
Set alarm timer
With Philips DockStudio, you can set multiple
alarms and know the latest weather. It even
alerts you when weather conditions are suitable
for your favorite outdoors activity.
1 Launch the app.
2 Tap the icon to access clock setting
menu.
3 Tap [Alarm settings] (Alarm settings).
4 Tap to access alarm setting menu.
18 EN
5 Set the alarm, and tap [Save] (Save) on the
top right of the screen.
» The new alarm is saved and displayed
on the screen.
Note
From the [Lifestyle] (Lifestyle) tab, you can select your
preferred sport and weather (excellent, good, or fair).
The alarm will not ring if the weather is not good
enough.
Set sleep timer
1 Launch Philips DockStudio.
2 Tap the icon to access the sleep timer
menu.
19
English
EN
3 Select a time period for the sleep timer,
and then tap [Start] (Start).
Note
This function only works with Philips Songbird.
Listen to Internet radio
1 Connect your Android-powered device
and the docking system through Bluetooth.
2 Open Philips DockStudio to go to the
main menu.
3 Tap [Radio] (Radio) on the screen.
4 Search a radio station in the search bar.
5 Select a radio station from the search
result list.
» The radio station begins to broadcast.
20 EN
Dock and charge Android-
powered phone
Dock Android-powered phone
To charge your Android-powered phone, you
1 Check the orientation of the micro USB
connector on your Android-powered
phone.
»
it outwards.
2 If necessary, rotate the USB connector on
the docking system, and then place your
Android-powered phone into the dock.
3 Adjust the bumpers on both sides of the
connector to stabilize the phone.
4 Slide the connector to place your phone in
the middle of the docking system.
Note
If the micro USB connector is located at the top, and
your are using Android system of version 2.3 or above,
screen auto-rotation is available.
Use dock extension
If the USB connector on your phone is close
to the edge, the supplied dock extension can
balance the docked phone, as illustrated.
1 Adjust the slide knobs to make both
bumpers at the lowest position.
21
English
EN
2 Place the dock extension onto the dock.
3 Dock your phone.
Charge Android-powered phone
When the docking system is connected to
power, your docked phone starts charging
automatically even in standby mode.
22 EN
5 Listen to FM
radio
Tune to FM radio stations
Tip
Position the antenna as far as possible from TV, VCR, or
other radiation source.
For better reception, fully extend and adjust the
position of the antenna.
1 Press SOURCE repeatedly to select FM
tuner source.
2 Press and hold / for two seconds.
» The docking system tunes to a station
with strong reception automatically.
3 Repeat step 2 to tune to more radio
stations.
To tune to a station manually:
1 Press /
optimal reception.
Store FM radio stations
automatically
Note
You can store a maximum of 20 FM radio stations.
In tuner mode, press an hold PROG for two
seconds.
» The docking system stores all the available
available station automatically.
Store FM radio stations
manually
1 Tune to an FM radio station.
2 Press PROG.
» The preset number begins to blink.
3 Press / repeatedly to select a number.
4 Press PROG
5 Repeat steps 1 to 4 to store other stations.
Note
To remove a pre-stored station, store another station
in its place.
Select a preset radio station
In tuner mode, press / repeatedly to select
a preset number.
23
English
EN
6 Other features
Set time
1 Press to switch the docking system to
standby mode.
2 Press and hold SET TIME for two seconds.
» The hour and minute digits begin to
blink.
3 Press / and / repeatedly to set
the hour and minute.
4 Press SET TIME
» [12H] or [24H] begins to blink.
5 Press / to select 12/24 hour format.
6 Press SET TIME
» The set time is displayed.
Set alarm timer
Set alarm
In standby mode, you can set two alarms to ring
at different time.
Note
Make sure that you have set the clock correctly.
1 Press and hold AL1/AL2 for two seconds
to activate alarm setting mode.
» The hour and minute digits begin to
blink.
2 Press / and / repeatedly to set
the hour and minute.
3 Press AL1/AL2
Select alarm source
Note
For alarm sound, you can select buzzer, your last
listened radio chanel, or the latest played track in your
Android-powered device.
Adjust AL1/AL2 RADIO·BUZZ·DOCK
control to select alarm source for both alarms.
Note
If DOCK is selected as alarm source, make sure that
you have docked your device into the docking system.
Activate/deactivate alarm timer
1 Press AL1/AL2 to view alarm settings.
2 Press AL1/AL2 again to activate or
deactivate the alarm timer.
» The alarm icon appears if alarm timer
is on and disappears if it is off.
To stop the ringing alarm, press the
corresponding AL1/AL2.
» The alarm repeats ringing for the next
day.
Snooze alarm
When alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing
nine minutes later.
Set sleep timer
This docking system can switch to standby
mode automatically after a preset period.
Press SLEEP repeatedly to select the sleep
timer period (in minutes).
» When the sleep timer is activated,
appears.
24 EN
To deactivate the sleep timer
Press SLEEP repeatedly until [OFF] (off)
appears.
Play audio from an external
device
You can listen to audio from an external device
through this device.
1 Connect the MP3 link cable to:
the MP3 LINK socket.
the headphone socket of an external
device.
2 Press SOURCE repeatedly to select MP3
link source.
» is displayed.
3 Play audio in the external device (see the
device's user manual).
Adjust display brightness
Press BRIGHTNESS repeatedly to select
different brightness levels.
25
English
EN
7 Product
information
Note
Product information is subject to change without prior
notice.
!
#
Rated Output Power 2 X 5W RMS
Tuner
Tuning Range FM: 87.5 -
108 MHz
Sensitivity
- Mono, 26dB S/N Ratio FM: <22 dBf
Search Selectivity FM: <28 dBf
Total Harmonic Distortion FM: <2%
Signal to Noise Ratio FM: >55 dB
General information
AC Power Model: AS180-070-
AA250; Input: 100-240
V ~, 50/60Hz, 0.7A;
Output: 7V 2.5A
Operation Power
Consumption
<35 W
Standby Power
Consumption
<1 W
Max. load of Android
output
5V 1A
Dimensions
- Main Unit
(W x H x D)
290 x 160 x 113 mm
Weight
- With Packing
- Main Unit
2.0 kg
1.4 kg
26 EN
8 Troubleshooting
Warning
Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.
No power
$Ensure that the AC power plug of the unit
is connected properly.
$Ensure that there is power at the AC
outlet.
No sound or poor sound
$Adjust the volume of your docking system
and Android-powered device.
$Make sure that your Android-powered
device is connected to the docking system
through Bluetooth.
Poor radio reception
$Increase the distance between the unit and
your TV or VCR.
$Fully extend the FM antenna.
Clock/timer setting erased
$Power has been interrupted or the power
plug has been disconnected.
$Reset the clock/timer.
Alarm does not work
$Set the clock/alarm correctly.
About Bluetooth device
Music playback is unavailable on the system
even after successful Bluetooth connection.
$The device cannot be used with the
system to play music.
The audio quality is poor after connection
with a Bluetooth-enabled device.
$The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
Cannot connect with the system.
$
required for the system.
$The Bluetooth function of the device is not
enabled. Refer to the user manual of the
device for how to enable the function.
$The system is not in the pairing mode.
$The system is already connected with
another Bluetooth-enabled device.
Disconnect that device or all other
connected devices and then try again.
The paired device connects and disconnects
constantly.
$The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
$For some devices, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the system.
27
English
EN
9 Notice
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Notice for the USA
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy
and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
Relocate the receiving antenna.
Increase the separation between
equipment and receiver.
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
This equipment complies with FCC’s and IC's
RF radiation exposure limits set forth for an
uncontrolled environment. The antenna(s)
used for this transmitter must be installed and
operated to provide a separation distance of
at least 20 cm from all persons and must not
be collocated or operating in conjunction with
any other antenna or transmitter. Installers must
ensure that 20cm separation distance will be
maintained between the device (excluding its
handset) and users.
RSS
This device complies with Industry Canada
license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this
device may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
The set complies with the FCC-Rules, Part
15. Operation is subject to the following two
conditions:
1.This device may not cause harmful
interference, and
2.This device must accept any interference
received, including interference that may cause
undesired operation.
Disposal of your old product
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
Please visit www.recycle.philips.com for additional
information on a recycling center in your area.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
28
Register online at www.philips.com/welcome today to
get the very most from your purchase.
For Customer Use
Enter below the Serial No. which is locat-
ed on the rear of the cabinet. Retain this
information for future reference.
Model No.__________________________
Serial No. ________________________
This “bolt of lightning” indicates unin-
sulated material within your unit may
cause an electrical shock. For the safety of
everyone in your household, please do not
remove product covering.
The “exclamation point” calls atten-
tion to features for which you should
read the enclosed literature closely to pre-
vent operating and maintenance problems.
WARNING: To reduce the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects
filled with liquids, such as vases, should not
be placed on this apparatus.
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot, fully
insert.
ATTENTION: Pour éviter les choc élec-
triques, introduire la lame la plus large de la
fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.
Congratulations on your purchase,
and welcome to the “family!”
Dear PHILIPS product owner:
P.S. To get the most from your PHILIPS purchase, be
sure to register online at:
www.philips.com/welcome
Register online at www.philips.com/welcome to ensure:
29
PHILIPS LIMITED WARRANTY
ONE (1) YEAR
WARRANTY COVERAGE:
PHILIPS warranty obligation is limited to the terms set forth
below.
WHO IS COVERED:
Philips warrants the product to the original purchaser or the per-
son receiving the product as a gift against defects in materials and
workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
WHAT IS COVERED:
The Philips warranty covers new products if a defect in material
or workmanship occurs and a valid claim is received by Philips
within the Warranty Period. At its option, Philips will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or ser-
viceable used parts and is at least functionally equivalent or most
comparable to the original product in Philips current inventory,
or (3) refund the original purchase price of the product.
Philips warrants replacement products or parts provided under
this warranty against defects in materials and workmanship from
the date of the replacement or repair for ninety (90) days or for
the remaining portion of the original product’s warranty,
whichever provides longer coverage for you. When a product or
part is exchanged, any replacement item becomes your property
and the replaced item becomes Philips’ property. When a refund
is given, your product becomes Philips’ property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-
TATIONS:
This Limited Warranty applies only to the new products manu-
factured by or for Philips that can be identified by the trademark,
trade name, or logo affixed to it. This Limited Warranty does not
apply to any non-Philips hardware product or any software, even
if packaged or sold with the product. Non-Philips manufacturers,
suppliers, or publishers may provide a separate warranty for their
own products packaged with the bundled product.
Philips is not liable for any damage to or loss of any programs,
data, or other information stored on any media contained within
the product, or any non-Philips product or part not covered by
this warranty. Recovery or reinstallation of programs, data or
other information is not covered under this Limited Warranty.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-Philips product, (b)
to damage caused by service performed by anyone other than
Philips or Philips Authorized Service Location, (c) to a product or
a part that has been modified without the written permission of
Philips, or (d) if any Philips serial number has been removed or
defaced, or (e) product, accessories or consumables sold “AS IS”
without warranty of any kind by including refurbished Philips
product sold “AS IS” by some retailers.
This Limited Warranty does not cover:
ment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary con-
tent for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of Philips.
for lost data or lost software.
returning product to Philips.
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
(including but not limited to rental purposes).
can be provided.
TO OBTAIN ASSISTANCE IN THE U.S.A., PUERTO
RICO, OR U.S. VIRGIN ISLANDS…
Contact Philips Customer Care Center at:
1-888-PHILIPS (1-888-744-5477)
TO OBTAIN ASSISTANCE IN CANADA…
1-800-661-6162 (French Speaking)
1-888-PHILIPS (1-888-744-5477) - (English or Spanish
Speaking)
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Some states do not allow the exclusions or limitation of inciden-
tal or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
3140 035 50201
Philips, P.O. Box 10313 Stamford, CT 06904
Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
AS140_37_CCR_V1.0
Philips Consumer Lifestyle
A division of Philips Electronics North America Corporation
P.O. Box 10313
Stamford, CT 06904
%&*;<<<;%=>?>%!@JJ;\J@@
Meet Philips at the Internet
http://www.philips.com/welcome