Philips AZ102C/79 User Manual
Displayed below is the user manual for AZ102C/79 by Philips which is a product in the CD Players category. This manual has pages.
Related Manuals
CD Soundmachine
Register your product and get support at
www.philips.com/welcome
User Manual
AZ102C
AZ102S
DYNAMIC BASS BOOST
CD SOUNDMACHINE AZ102
VOLUME
S
H
UF
F
L
E
R
E
P
E
A
T
P
R
O
G
L
I
F
T
T
O
O
P
E
N
TUNING
1
@
2
35
4
6
7
8
0
S
1
6 x R14 • UM-2 • C-CELLS
STANDBY
MWFM
CD
DBB
ON OFF
LINE-IN
9
@
#
!
$
2
ALL
PROG
X
3
4
5
6
7
8
Congratulations on your purchase and
welcome to Philips!
To fully benefit from the support that
Philips offers, register your product at
www.philips.com/welcome.
Supplied Accessories
– AC power cord
Top/front panels (See 1)
1
VOLUME
–
adjusts volume level.
2
SHUFFLE – plays all tracks in random order
3REPEAT
–
repeats a track/
CD program/entire CD.
4
–
starts or pause CD playback
–
selects the next/previous track
– searches forwards/backwards (press and
hold the button) within the current track
–
stops CD playback;
–
erases a CD program
5PROG – programs tracks and reviews the
program
6LIFT TO OPEN – opens/closes the CD
door.
7TUNING
– tunes to radio stations
8
Display
–
shows the CD functions
Back panel (See 1
and
2)
9
Source selector:CD, FM, MW, STANDBY
–
selects CD or radio source of sound
–
switches to standby
0Telescopic antenna - improves FM reception.
!AC MAINS~ - inlet for power cord.
@
DBB
–
turns the bass enhancement on/off.
#
LINE-IN
– inlet for external audio source.
Bottom panel
$Battery door –
Press on the arrow and
push to
insert 6 x 1.5V R-14/ UM-2/ C-
cells.
CAUTION
- Visible and invisible laser radiation.
If the cover is open, do not look at
the beam.
- High voltage! Do not open.You run
the risk of getting an electric shock.
The machine does not contain any
user-serviceable parts.
- Modification of the product could
result in hazardous radiation of
EMC or other unsafe operation.
- Use of controls or adjustments or
performance of precedures other
than herein may result in unsafe
operation.
This set complies with the radio
interference requirements of the
European Union.
Power Supply
Whenever convenient, use the power supply
cord if you want to conserve battery life.
Make sure you remove the plug from the set
and wall outlet before inserting batteries.
Batteries (not included)
1 Open the battery door and insert 6 batteries,
type R-14,UM-2 or C-cells, (preferably
alkaline) with the correct polarity as indicated by
the "+" and "–" symbols inside the compartment.
2 Replace the battery door, making sure the
batteries are firmly and correctly in place.The
set is now ready to operate.
Batteries contain chemical substances, so
they should be disposed of properly.
/ "#%%'(&#''%&"(& '%# ,'
"* #%%#'#!$%'!"'#%
(&'''%&'#(%&':
/ #"#'!+''%,',$& "*'
%#"-" " ,(&''%&#'&!',$
#%'&'
/ ""&%'""*''%& #"#''%,'#!+
# ''%&*''"*#"&
/ !#)'''%&'&'&"#''#(&
#% #"'!
English Controls/Power Supply
Power Supply General Operation / Tuner
Using AC power
WARNING:Always check you have
completely switched off the set, before
you change or disconnect power supply.
1 Check if the power voltage, as shown on
the type plate located on the bottom
of the set, corresponds to your local power
supply. If it does not, consult your dealer or
service center.
2 Connect the power cord to the AC
MAINS~ inlet and the wall socket.The set is
now connected and ready for use.
3 To switch the set off completely, withdraw the
power cord from the wall socket.
4Install the unit near the AC outlet and where
the AC power plug can be easily reached.
ADisconnect the power cord from the wall
socket to protect your set during heavy
thunderstorms. Children could seriously injure
themselves as the free end of the cable may
still be live if only the connector is removed
from the MAINS socket at the back of the
unit.
The type plate is located on the bottom
of the set.
Helpful hints:
–#)#(""&&%,"%,#"&(!$'#"
*,&(&''
Source selector
'#
STANDBY
'%(&"'&'
General operation
Switching on and off and selecting the
function
1 To select your sound source, adjust the
Source selector to: CD, FM or
MW.
2To switch off the set, adjust the Source
selector to
STANDBY
position.
3To switch to LINE IN mode, connect an
external audio source to the LINE-IN inlet.
Helpful hints:
AThe set switches to LINE IN mode
automatically when an external audio source
is connected, no matter the set is in CD,FM
or
MW
mode.
AThe LINE-IN inlet is not for earphones.
Adjusting volume and sound
Adjust the sound with the VOLUME and
DBB controls.
Radio reception
1 Adjust the Source selector to FM or
MW.
2 Tur n TUNING to tune to a station.
Helpful hints:
To improve radio reception
AFor FM, extend, incline and turn the
telescopic antenna for best reception. Reduce
its length if the signal is too strong.
AFor MW, the set uses a built-in antenna.
Direct this antenna for best reception by
turning the whole set.
Playing a CD
AThis CD player plays Audio Discs including
CD-Recordables (CD-R) and CD-Rewritables
(CD-RW).
AMP3, CD-ROM, CD-I, CDV,VCD, DVD or
computer CDs are not possible for playback.
IMPORTANT!
CDs encoded with copyright protection
technologies by some record companies may
be unplayable by this product.
1Adjust the Source selector to CD.
2Open the CD door, and insert a CD with
the printed side facing up, then press the CD
door gently to close.
Display shows --, and later the total
number of tracks. (See 3)
3Press
to start playback.
4To pause playback, press
.
Display: flashes.
(See 4)
5To resume, press
again.
6To stop CD playback, press
.
Helpful hints:
$ ,* &#&'#$*"
–,#(#$"'##%
–,#(& '
FM
MW
#%
STANDBY
–'&%'"
Selecting a different track
Press
/
once or repeatedly until the
desired track number appears in the display.
In the pause/stop position, press to start
playback.
Finding a passage within a
track
1During playback, press and hold or .
The CD is played at high speed and with
reduced volume.
2When you recognize the passage you want,
release or to resume normal playback.
Helpful hints:
. ",#(%&%"%&'"#'
&''% '#&'#&'#$!#
CD Player
Programming track
numbers
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1In the stop position, press PROG to
activate programming.
Display: PROG and 00 flash. (See 5)
2Press
or
to select your desired track
number.
3Press PROG to store the desired track
number.
Display: PROG and 00 flash for you to
program the next track..
4Repeat steps 2 to 3to select and store all
desired tracks in this way.
If you attempt to store more than 20
tracks, no track can be selected and the
display shows --.
5To play your program, press
/
.
Helpful hints :
– When playback of your program comes
to the stop position, your set will return
to normal playback.To re-enter program
mode, press PROG in the stop position.
Reviewing the program
In the stop position, press PROG repeatedly
to see your stored tracks.
Erasing a program
You can erase the contents of the memory
by:
– in the stop position, press PROG to enter
program mode, and then press
.
– selecting
FM
,
MW
or
STANDBY
;
– opening the CD door;
Different play modes:
REPEAT. and SHUFFLE
(See 6,7)
REPEAT
You can play the current track or the whole
disc repeatedly, and combine REPEAT
modes with PROG (PROGRAM).
REP – plays the current track continuously.
REP ALL –repeats the entire CD/program
1To select play mode, press REPEAT once or
more.
The display shows REP icon or REP
ALL icon.
2Press to start playback if in the stop/pause
position.
3To return to normal playback, press REPEAT
repeatedly until the modes are no longer
displayed.
– You can also press to cancel your play
mode.
SHUFFLE
You can play all the tracks in random order.
1In the stop position, press SHUFFLE to
switch on shuffle play.
Display shows SHUFFLE icon.
2To switch off shuffle play, press .
Helpful hints:
–During the shuffle play, when REP function is
selected, it will play the current shuffled track
repeatedly, or when the REP ALL function is
selected, it will repeat the shuffle play of the
entire CD.
CD Player
CD player and CD handling
AIf the CD player cannot read CDs correctly,
use a cleaning CD to clean the lens before
taking the set to repair.
AThe lens of the CD player should never be
touched!
ASudden changes in the surrounding
temperature can cause condensation on the
lens of your CD player. Playing a CD is then
not possible. Do not attempt to clean the
lens but leave the set in a warm environment
until the moisture evaporates.
Always close the CD door to avoid dust on
the lens.
A!o clean the CD, wipe in a straight line from
the center towards the edge using a soft,
lint-free cloth. Do not use cleaning agents as
they may damage the disc.
ANever write on a CD or attach any stickers
to it.
Safety information
APlace the set on a flat, hard and stable surface
so that the system does not tilt.
AWhere the MAINS plug or an appliance
coupler is used as the disconnect device, the
disconnect device shall remain readily
operable.
ADo not expose the set, batteries, CDs to
humidity, rain, sand or excessive heat caused
by heating equipment or direct sunlight.
AThe apparatus shall not be exposed to
dripping or splashing.
AAdequate ventilation with a minimum gap of
15cm (6 inches) between the ventilation
holes and surrounding surfaces is necessary
to prevent heat build-up.
ADo not cover the ventilation openings with
items such as newspapers, table-cloths,
curtains, etc.
ANo objects filled with liquids, such as vases,
shall be placed on the apparatus.
ANo naked flame sources, such as lighted
candles, should be placed on the apparatus.
AThe mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
A!o clean the set, use a dry cloth. Do not use
any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may
harm the housing.
Maintenance & Safety (See 8)
Problem
–Possible cause
ARemedy
No sound /power
–Volume not adjusted
AAdjust the VOLUME
–Power cord not securely connected
AConnect the AC power cord properly
–Batteries dead/ incorrectly inserted
AInsert (fresh) batteries correctly
–CD contains non-audio files
APress
,
once or more to skip to a CD audio
track, instead of the data file.
Display does not function properly / No
reaction to operation of any of the
controls
–Electrostatic discharge
ASwitch off and unplug the set. Reconnect after a
few seconds
--,Er
or
01 indication
–No CD inserted
A
Insert a CD
–CD badly scratched or dirty
A
Replace/ clean CD, see Maintenance
–Laser lens steamed up
A$ait until lens has cleared
–CD-R/CD-RW is blank or not finalized
A
Use a finalized CD-R/CD-RW or suitable CD
Audio disc only
Note:
Make sure the CD is not encoded with
copyright protection technologies, as some
do not conform to the Compact Disc
standard.
The CD skips tracks
–CD damaged or dirty
AReplace or clean CD
–Program/shuffle is active
AQuit program/shuffle mode
Note: A CD badly scratch or dirty may result in
improper operation.
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
WARNING: Do not open the set as there is a risk of electric shock. Under no
circumstances should you try to repair the set yourself, as this will
invalidate the guarantee.
Specifications
Power consumption
Active.................................................................... 15W
Standby............................................................... 0.7W
Dimensions ............290mm x 143mm x 240mm
Weight ..........................................................................1,62 kg
Recycling
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
When you see the crossed-out wheel bin symbol attached to a product, it means the
product is covered by the European Directive 2002/96/EC:
Never dispose of your product with other household waste. Please inform yourself
about the local rules on the separate collection of electrical and electronic products.
The correct disposal of your old product helps prevent potentially negative
consequences on the environment and human health.
Your product contains batteries covered by the European Directive 2006/66/EC, which
cannot be disposed of with normal household waste.
Please inform yourself about the local rules on separate collection of batteries.The
correct disposal of batteries helps prevent potentially negative consequences on the environment
and human health.
W
Meet Philips at the Internet
http://www.philips.com
CLASS 1
LASER PRODUCT
AZ102C/S_79_UM_V3.0
AZ102C
AZ102S