Table of Contents
Philips DCM3020/79 User Manual
Displayed below is the user manual for DCM3020/79 by Philips which is a product in the Home Audio Systems category. This manual has pages.
Related Manuals
www.philips.com/welcome
User manual
Always there to help you
Register your product and get support at
DCM3020
Question?
Contact
Philips
DCM3020_79_UM_V2.0.indd 1 12/30/2013 5:51:53 PM
DCM3020_79_UM_V2.0.indd 2 12/30/2013 5:51:53 PM
1EN
Contents
1 Important 2
Safety 2
2 Your Micro System 4
Introduction 4
What's in the box 4
Overview of the main unit 5
Overview of the remote control 8
3 Get started 9
Connect speakers 9
Connect FM antenna 9
Connect power 9
Demonstrate the features 9
Prepare the remote control 10
Set clock 10
Turn on 10
4 Play 11
Play a disc 11
Play from USB 11
Play iPod/iPhone/iPad 11
Listen to radio 12
5 Play options 13
Pause/resume play 13
Skip to a track 13
Search within a track 13
Program tracks 13
Display time 14
Select repeat/shufe play options 14
6 Adjust sound 14
Adjust volume 14
Select a preset sound effect 14
Enhance bass 14
Mute sound 14
7 Other features 15
Set the sleep timer 15
Set the alarm timer 15
Play from external audio device 15
Adjust display brightness 15
8 Product information 16
Specications 16
USB playability information 16
Supported MP3 disc formats 17
Maintenance 17
9 Troubleshooting 17
10 Notice 18
Contents
DCM3020_79_UM_V2.0.indd 1 12/30/2013 5:51:53 PM
2EN
1 Important
Safety
This 'bolt of lightning' indicates uninsulated
material within the device may cause an
electrical shock. For the safety of everyone in
your household, please do not remove the
covering.
The 'exclamation mark' calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
WARNING: To reduce the risk of re or electric
shock, the device should not be exposed to rain
or moisture and objects lled with liquids, such
as vases, should not be placed on the device.
CAUTION: To prevent electric shock, fully
insert the plug. (For regions with polarized
plugs: To prevent electric shock, match wide
blade to wide slot.)
Important Safety Instructions
• Follow all instructions.
• Heed all warnings.
• Do not use this device near water.
• Clean only with dry cloth.
• Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
• Do not install near any heat sources such
as radiators, heat registers, stoves, or other
devices (including ampliers) that produce
heat.
• Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the device.
• Only use attachments/accessories specied
by the manufacturer.
• Use only with the cart, stand, tripod,
bracket, or table specied by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/device combination to
avoid injury from tip-over.
• Unplug this device during lightning storms
or when unused for long periods of time.
• Refer all servicing to qualied service
personnel. Servicing is required when the
device has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have
fallen into the device, the device has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
• Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
device:
• Install all batteries correctly, + and - as
marked on the device.
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• The batteries shall not be exposed to
excessive heat such as sunshine, re or
the like.
• Remove batteries when the device is
not used for a long time.
• Device shall not be exposed to dripping or
splashing.
• Do not place any sources of danger on
the device (e.g. liquid lled objects, lighted
candles).
DCM3020_79_UM_V2.0.indd 2 12/30/2013 5:51:54 PM
3EN
• Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
•Never remove the casing of this device.
•Never lubricate any part of this device.
•Never place this device on other electrical equipment.
•Keep this device away from direct sunlight, naked
ames or heat.
•Never look into the laser beam inside this device.
•Ensure that you always have easy access to the power
cord, plug, or adaptor to disconnect this device from
the power.
Hearing safety
Listen at a moderate volume.
• Using headphones at a high volume can
impair your hearing. This product can
produce sounds in decibel ranges that may
cause hearing loss for a normal person,
even for exposure less than a minute. The
higher decibel ranges are offered for those
that may have already experienced some
hearing loss.
• Sound can be deceiving. Over time your
hearing 'comfort level' adapts to higher
volumes of sound. So after prolonged
listening, what sounds 'normal' can actually
be loud and harmful to your hearing. To
guard against this, set your volume to a safe
level before your hearing adapts and leave
it there.
To establish a safe volume level:
• Set your volume control at a low setting.
• Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
Listen for reasonable periods of time:
• Prolonged exposure to sound, even
at normally 'safe' levels, can also cause
hearing loss.
• Be sure to use your equipment reasonably
and take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
• Listen at reasonable volumes for
reasonable periods of time.
• Be careful not to adjust the volume as your
hearing adapts.
• Do not turn up the volume so high that
you can't hear what's around you.
• You should use caution or temporarily
discontinue use in potentially hazardous
situations. Do not use headphones while
operating a motorized vehicle, cycling,
skateboarding, etc.; it may create a trafc
hazard and is illegal in many areas.
DCM3020_79_UM_V2.0.indd 3 12/30/2013 5:51:54 PM
4EN
2 Your Micro
System
Congratulations on your purchase, and
welcome to Philips! To fully benet from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this unit, you can enjoy audio from disc,
USB devices, iPod players, iPhone and other
external devices, or listen to radio stations.
The unit offers Digital Sound Control (DSC)
and Dynamic Bass Boost (DBB).
The unit supports the following media formats:
What's in the box
Check and identify the contents of your
package:
• Main unit
• 2 x speakers
• Remote control (without battery)
• Power cord
• Round to at adaptor
• FM antenna
• MP3 link cable
• 8 x rubber cushions
• Quick start guide
• User manual
DCM3020_79_UM_V2.0.indd 4 12/30/2013 5:51:54 PM
5EN
Overview of the main unit
Top and front view
a
• Turn on the unit, or switch to standby
mode.
b PRESET +/-
• Select a preset radio station.
• Skip to the previous/next album.
abcdef
h
i
j
k
l
m
n
o
g
c /
• Skip to the previous/next track.
• Search within a track/disc/USB.
• Tune to a radio station.
• Navigate through iPod/iPhone/iPad
menu.
• Adjust time.
DCM3020_79_UM_V2.0.indd 5 12/30/2013 5:51:55 PM
6EN
d
• Stop play.
• Erase a program.
e SOURCE
• Select a source: CD, FM TUNER, USB,
DOCK, AUX IN, or MP3 LINK.
f
• Open/close the disc compartment.
g Dock for iPod/iPhone/iPad
h
• USB socket.
i
• Start or pause play.
j VOLUME + / -
• Adjust volume.
k Display panel
• Show current status.
l Disc compartment
m MP3-LINK
• Connect external audio device.
n
• Headphone socket.
o STANDBY
• Standby mode indicator.
DCM3020_79_UM_V2.0.indd 6 12/30/2013 5:51:56 PM
7EN
Back view
a AUX IN
• Connect an external audio device.
b SPEAKER OUT
• Connect the speakers.
c Voltage selector
• select suitable voltage
d AC MAIN~
• Power supply socket.
e FM ANTENNA
• Improve FM reception.
c
b
ad
e
DCM3020_79_UM_V2.0.indd 7 12/30/2013 5:51:57 PM
8EN
Overview of the remote
control
a
• Turn on the unit, or switch to standby
mode, or switch to Eco Power standby.
b SOURCE
• Select a source: CD, FM TUNER, USB,
DOCK, AUX-IN, or MP3 LINK.
c DISPLAY
• Select display information during play.
d PRESET/ALBUM /
• Skip to the previous/next album.
• Select a preset radio station.
e /
• Skip to the previous/next track.
• Tune to a radio station.
a
b
c
d
f
e
g
h
i
j
k
l
m
p
q
r
s
o
n
• Search within a track/disc/USB.
• Navigate through iPod/iPhone/iPad
menu.
• Adjust time.
f OK
• Conrm a selection.
g RDS
• For selected FM radio stations: display
RDS information.
h
• Stop play or erase a program.
i
• Start or pause play.
j VOL -/+
• Adjust volume.
k Numeric keypad
• Select a track from a disc directly.
• Select a preset radio station.
l REPEAT/SHUFFLE
• Play a track or all tracks repeatedly.
• Play tracks randomly.
m DBB
• Turn on/off dynamic bass
enhancement.
n DSC
• Select a preset sound setting.
o DIM
• Adjust brightness of display panel.
• Turn off LED light around VOLUME
knob.
p PROG
• Program tracks.
• Program radio stations.
q
• Mute or restore volume.
r MENU
• Access iPod/iPhone/iPad menu.
s SLEEP/TIMER
• Set the sleep timer.
• Set the alarm timer.
DCM3020_79_UM_V2.0.indd 8 12/30/2013 5:51:58 PM
9EN
3 Get started
Caution
•Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Connect speakers
Note
•For optimal sound, use the supplied speakers only.
•Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specications section of this manual.
Insert the speaker wires completely into the
speaker input sockets on the back of the unit.
Connect FM antenna
Tip
•For optimal reception, fully extend and adjust the
position of the antenna.
Connect the supplied FM antenna to the FM
ANTENNA jack on the main unit.
Connect power
Caution
•Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or
underside of the apparatus.
•Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
•Before connecting the AC adaptor, ensure you have
completed all other connections.
Connect the power adaptor to:
• the AC MAIN~ jack on the main unit.
• the wall outlet.
Demonstrate the features
1 After connecting the power, the micro
music system starts to demonstrate
features automatically.
2 In the standby mode, you also can
demonstrate features by pressing until
"DEMO ON" is displayed.
» The features are displayed one by one
across the display panel.
• To turn off the demonstration, press again.
DCM3020_79_UM_V2.0.indd 9 12/30/2013 5:51:58 PM
10 EN
Prepare the remote control
Caution
•Risk of explosion! Keep batteries away from heat,
sunshine or re. Never discard batteries in re.
•Risk of decreased battery life! Never mix different
brands or types of batteries.
•Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
To insert the remote control battery:
1 Open the battery compartment.
2 Insert 2 AAA batteries (not supplied) with
correct polarity (+/-) as indicated.
3 Close the battery compartment.
Set clock
1 In standby mode, press and hold CLOCK/
DISPLAY on the remote control to
activate the clock setting mode.
» The hour digits are displayed and begin
to blink.
a
b
c
2 Press / to set the hour, and press
CLOCK/DISPLAY.
» The minute digits are displayed and
begin to blink.
3 Repeat step 2 to set the minute.
Turn on
Press .
» The unit switches to the last selected
source.
Switch to standby
Press again to switch the unit to standby
mode.
» The clock (if set) appears on the
display panel.
Switch to ECO standby mode:
Press and hold for more than 3 seconds.
» [ECO STANDBY] (Eco standby)
is displayed for 3 seconds and then
disappeared.
Tip
•The unit switches to Eco Power Standby mode after 15
minutes in standby mode.
Switch between standby mode and ECO
standby mode:
Press and hold for more than 2 seconds.
DCM3020_79_UM_V2.0.indd 10 12/30/2013 5:51:59 PM
11EN
4 Play
Play a disc
1 Press SOURCE repeatedly to select CD
source.
2 Press to open the disc compartment.
3 Insert a disc with the printed side facing
upward.
4 Press to close the disc compartment.
5 Play starts automatically.If not, press .
Play from USB
Note
• Ensure that the USB device contains playable audio
content.
1 Insert the USB device into the socket.
2 Press SOURCE repeatedly to select the
USB source.
» Play starts automatically. If not, press
.
• To select a folder, press PRESET +/-.
• To select an audio le, press / .
Play iPod/iPhone/iPad
When the iPod/iPhone/iPad is docked on this
Micro System, you can listen to music from the
speakers.
Note
•No audio output from the headphone jack in this
situation.
Compatible iPod/iPhone/iPad
The device supports these iPod, iPhone and
iPad models:
Made for.
• iPod touch (1st, 2nd, 3rd, and 4th
generation)
• iPod Mini
• iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th
generation)
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
• iPad
DCM3020_79_UM_V2.0.indd 11 12/30/2013 5:52:00 PM
12 EN
Play an iPod/iPhone/iPad
Note
•When an iPod/iPhone/iPad player is loaded, the unit
switches to iPod source automatically.
1 Push to open the dock compartment.
2 Place the iPod/iPhone/iPad player in the
dock. Press SOURCE repeatedly to select
DOCK source.
» The connected iPod/iPhone/iPad plays
automatically.
• To pause/resume play, press .
• To skip to a track, press / .
• To search during play, press and hold
/ , then release to resume
normal play.
Charge the iPod/iPhone/iPad
Note
•iPod with color display, iPod classic, and iPod with video
are not compatible with dock charging.
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge
automatically.
Listen to radio
Tune to a radio station
1 Press SOURCE repeatedly to select the
tuner source.
2 Press and hold / for more than 2
seconds.
» [SEARCH] (search) is displayed.
» The radio tunes to a station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
Tip
•To tune to a weak station, press / repeatedly
until you nd optimal reception.
Program radio stations automatically
You can program a maximum of 20 preset
radio stations (FM).
In the tuner mode, press and hold PROG for
more than 2 seconds to activate automatic
program mode.
» AUTO SCAN (auto scan) is displayed.
» All available stations are programmed
in the order of waveband reception
strength.
» The rst programmed radio station is
broadcast automatically.
Program radio stations manually
You can program a maximum of 20 preset
radio stations (FM).
1 Tune to a radio station.
2 Press PROG to activate program mode.
» [PROG] (program) is displayed.
DCM3020_79_UM_V2.0.indd 12 12/30/2013 5:52:00 PM
13EN
3 Press PRESET +/- to allocate a number
to this radio station, then press PROG to
conrm.
4 Repeat the above steps to program other
stations.
Tip
•To overwrite a programmed station, store another
station in its place.
Select a preset radio station
In tuner mode, press PRESET +/- to select a
preset number.
• You can also press the numeric buttons to
select a preset number directly.
Tip
•Position the antenna as far as possible from TV, VCR or
other radiation source.
•For optimal reception, fully extend and adjust the
position of the antenna.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1 Tune to an RDS station.
2 Press RDS repeatedly to scroll through the
following information (if available):
» Station name
» Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
» RDS RT
» Frequency
5 Play options
Pause/resume play
During play, press to pause/resume play.
Skip to a track
For CD:
Press / to select another track.
• To select a track directly, you can also
press a key on the numerical keypad.
For MP3 disc and USB:
1 Press PRESET +/-to select an album or a
folder.
2 Press / to select a track or a le.
Search within a track
1 During play, press and hold / .
2 Release to resume normal play.
Program tracks
Note
•You can program tracks only when the play stops.
You can program a maximum of 20 tracks.
1 Press PROG to activate the program
mode.
» [PROG] (program) is displayed.
2 For MP3/WMA tracks, press PRESET +/-
to select an album.
3 Press / to select a track, then press
PROG to conrm.
DCM3020_79_UM_V2.0.indd 13 12/30/2013 5:52:01 PM
14 EN
4 Repeat steps 2 to 3 to program more
tracks.
5 Press to play the programmed tracks.
» During play, [PROG] (program) is
displayed.
• To erase the program, in the stop
position, press .
Display time
Press DISPLAY to display time.
Tip
•In Eco Standby mode, time is displayed for 15 minutes.
Select repeat/shufe play
options
1 During play, press REPEAT/SHUFFLE
repeatedly to select a repeat option or the
shufe play mode.
• REP (repeat): the current track is
played repeatedly.
• REP ALL (repeat all): all tracks are
played repeatedly.
• REP ALB (repeat album): all tracks in
this album are played repeatedly.
• SHUF (shufe): all tracks are played
randomly.
2 To resume normal play, press
REPEAT/SHUFFLE repeatedly until no
option is displayed.
6 Adjust sound
Adjust volume
During play, press VOL +/- to increase/decrease
the volume.
Select a preset sound effect
During play, press DSC repeatedly to select:
• [ROCK] (rock)
• [JAZZ] (jazz)
• [CLASSIC] (classic)
• [POP] (pop)
Enhance bass
During play, press DBB to turn on or off
dynamic bass enhancement.
» If DBB is activated, [DBB] (DBB) is
displayed.
Mute sound
During play, press to mute/unmute sound.
DCM3020_79_UM_V2.0.indd 14 12/30/2013 5:52:01 PM
15EN
7 Other features
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
When the unit is turned on, press SLEEP
repeatedly to select a set period of time (in
minutes).
» When sleep timer is activated, is
displayed.
To deactivate sleep timer
Press SLEEP repeatedly until [OFF] (off) is
displayed.
» When sleep timer is deactivated,
disappears.
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, TUNER, USB, or iPhone/iPod/iPad is
activated to play at a preset time.
Note
•Ensure that you have set the clock correctly.
1 Press and hold TIMER to active the timer
mode.
2 Press SOURCE to select a source, and
press TIMER to conrm.
» The hour digits are displayed and begin
to blink.
3 Press / to set the hour and press
TIMER to conrm.
» The minute digits are displayed and
begin to blink.
4 Repeat step 3 to set the minute.
» The timer is set and activated.
Activate and deactivate the alarm
timer
Press TIMER repeatedly to activate or
deactivate the timer.
» If the timer is activated, is displayed.
» If the timer is deactivated,
disappears on the display.
Note
•If DISC/USB/iPhone/iPod/iPad source is selected
and the track cannot be played, tuner is activated
automatically.
Play from external audio
device
You can play from an external audio device
such as MP3 player through this unit.
1 Connect the audio device.
• For audio device with red/white audio
output sockets:
Connect a red/white audio cable (not supplied)
to the AUX-IN sockets and to the audio
output sockets on the audio device.
• For audio device with headphone
sockets:
Connect the supplied MP3-Link cable to the
MP3-LINK socket and to the headphone
socket on the audio device.
2 Press SOURCE to select MP3-LINK/AUX-
IN source.
3 Play the device.
Adjust display brightness
Press DIM repeatedly to select different levels
of display brightness:
• High brightness
• Mid brightness
• Low brightness
DCM3020_79_UM_V2.0.indd 15 12/30/2013 5:52:01 PM
16 EN
8 Product
information
Note
•Product information is subject to change without prior
notice.
Specications
Amplier
Total output power 2 x 60 W RMS
Frequency response 80 Hz - 16 kHz, ±
3 dB
Signal to noise ratio > 60 dB
MP3 link input 0.5 V RMS 20 k
Disc
Laser type Semiconductor
Disc diameter 12 cm /8 cm
Support disc CD-DA, CD-R,
CD-RW, MP3-CD,
WMA-CD
Audio DAC 24 Bits / 44.1 kHz
Total harmonic
distortion
< 1.5%
Frequency response 60 Hz -16 kHz
(44.1 kHz)
Signal to noise ratio > 55 dBA
Tuner
Tuning range FM: 87.5 - 108 MHz
Tuning grid 50 KHz
Number of presets 20
Speakers
Speaker impedance 2 x 60 W, 4 OHM
General information
AC power 220-240V; 50 Hz
Operation Power
Consumption
60 W
Standby Power
Consumption
< 12 W
USB Direct Version 1.1
Dimensions
(W x H x D)
- Main Unit
- Speaker
239 x 141.5 x 230 mm
142 x 307 x 230 mm
Weight
- Main Unit
- Speaker
1.92 kg
2.55 kg x 2
USB playability information
Compatible USB devices:
• USB ash memory (USB 1.1)
• USB ash players (USB 1.1)
• memory cards (requires an additional card
reader to work with this unit)
Supported formats:
• USB or memory le format FAT12, FAT16,
FAT32 (sector size: 512 bytes)
• MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
• WMA v9 or earlier
• Directory nesting up to a maximum of 8
levels
• Number of albums/ folders: maximum 99
• Number of tracks/titles: maximum 999
• ID3 tag v2.0 to v2.3
• File name in Unicode UTF8 (maximum
length: 16 bytes)
DCM3020_79_UM_V2.0.indd 16 12/30/2013 5:52:02 PM
17EN
Supported MP3 disc formats
• ISO9660, Joliet
• Maximum title number: 999 (depending on
le name length)
• Maximum album number: 99
• Supported sampling frequencies: 32 kHz,
44.1 kHz, 48 kHz
• Supported Bit-rates: 32~320 (kbps),
variable bit rates
Maintenance
Clean the cabinet
• Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits, ammonia
or abrasives.
Clean discs
• When a disc becomes dirty, clean it with
a cleaning cloth. Wipe the disc from the
centre out.
• Do not use solvents such as benzene,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
Clean the disc lens
• After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
play quality, clean the disc lens with Philips
CD lens cleaner or any commercially
available cleaner. Follow the instructions
supplied with cleaner.
9 Troubleshooting
Warning
•Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.
No power
•Make sure that the AC cord of the
apparatus is connected properly.
•Make sure that there is power at the AC
outlet.
•As a power-saving feature, the system
switches off automatically 15 minutes after
track play reaches the end and no control
is operated.
No sound or poor sound
•Adjust the volume.
•Disconnect the headphones.
•Check that the speakers are connected
correctly.
•Check if the stripped speaker wires are
clamped.
No response from the unit
•Disconnect and reconnect the AC power
plug, then turn on the unit again.
•As a power-saving feature, the system
switches off automatically 15 minutes after
track play reaches the end and no control
is operated.
Remote control does not work
•Before you press any function button, rst
select the correct source with the remote
control instead of the main unit.
DCM3020_79_UM_V2.0.indd 17 12/30/2013 5:52:02 PM
18 EN
•Reduce the distance between the remote
control and the unit.
•Insert the battery with its polarities (+/–
signs) aligned as indicated.
•Replace the battery.
•Aim the remote control directly at the
sensor on the front of the unit.
No disc detected
•Insert a disc.
•Check if the disc is inserted upside down.
•Wait until the moisture condensation at
the lens has cleared.
•Replace or clean the disc.
•Use a nalized CD or correct format disc.
Cannot display some les in USB device
•The number of folders or les in the USB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
•The formats of these les are not
supported.
USB device not supported
•The USB device is incompatible with the
unit. Try another one.
Poor radio reception
•Increase the distance between the unit and
your TV or VCR.
•Fully extend the FM antenna.
•Connect an outdoor FM antenna instead.
Timer does not work
•Set the clock correctly.
•Switch on the timer.
Clock/timer setting erased
•Power has been interrupted or the power
cord has been disconnected.
•Reset the clock/timer.
10 Notice
Any changes or modications made to this
device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the equipment.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
Your product contains batteries, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
Please visit www.recycle.philips.com for
additional information on a recycling center in
your area.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
The making of unauthorized copies of copy-
protected material, including computer
programs, les, broadcasts and sound
DCM3020_79_UM_V2.0.indd 18 12/30/2013 5:52:02 PM
19EN
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
“Made for iPod,” “Made for iPhone,” and “Made
for iPad” mean that an electronic accessory
has been designed to connect specically to
iPod, iPhone, or iPad, respectively, and has
been certied by the developer to meet
Apple performance standards. Apple is not
responsible for the operation of this device
or its compliance with safety and regulatory
standards. Please note that the use of this
accessory with iPod, iPhone, or iPad may affect
wireless performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries. iPad
is a trademark of Apple Inc.
This apparatus includes this label:
Note
•The type plate is located on the bottom of the
apparatus.
DCM3020_79_UM_V2.0.indd 19 12/30/2013 5:52:03 PM
20 EN
DCM3020_79_UM_V2.0.indd 20 12/30/2013 5:52:04 PM
DCM3020_79_UM_V2.0.indd 21 12/30/2013 5:52:04 PM
2014 © WOOX Innovations Limited. All rights reserved.
This product was brought to the market by WOOX Innovations Limited or
one of its afliates, further referred to in this document as WOOX Innovations,
and is the manufacturer of the product. WOOX Innovations is the warrantor in
relation to the product with which this booklet was packaged. Philips and the
Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
DCM3020_79_UM_V2.0
DCM3020_79_UM_V2.0.indd 22 12/30/2013 5:52:04 PM