Philips DPM6000 User Manual
Displayed below is the user manual for DPM6000 by Philips which is a product in the Dictaphones category. This manual has pages.
Related Manuals
Enterprise Dictate 4.5
Pro Dictate 8
Dictate 8
EN User manual 3
DE Benutzerhandbuch 25
FR Manuel de l‘utilisateur 47
ES Manual del usuario 69
IT Manuale di istruzioni 91
NL Gebruikershandleiding 113
SV Användarhandbok 135
For product information and support, visit
www.philips.com/dictation SPEECHEXEC
3User manual
5 Use more of SpeechExec 17
5.1 Settings menu 17
5.2 Pocket Memo Configuration Wizard 17
5.3 Configure the download process from
the Pocket Memo 17
5.4
PR
OSpeechMike Configuration Wizard 18
5.5
PR
OSpeech recognition functions 18
5.5.1
PR
OSystem requirements for speech
recognition 18
5.5.2
PR
OSetting up speech recognition 18
5.5.3
PR
OUsing speech recognition 19
5.5.4
PR
OPlayback and correction of transcribed
recordings 20
5.6 Send dictation files by email or to an
FTP server 20
5.6.1 Set up an email profile 21
5.6.2 Set up an FTP profile 21
5.6.3 Manually send dictation files via email or
to an FTP server 21
5.6.4 Automatically send dictation files via email
or to an FTP server 21
5.6.5 Send and receive automatically 22
6 Frequently asked questions 23
1 Important 4
2 Your SpeechExec dictation
software 6
2.1 Overview SpeechExec work list
window 6
2.2 Overview SpeechExec recorder and
player window (expanded mode) 8
3 Get started 10
3.1 System requirements 10
3.2 Install the software 10
3.3 Start SpeechExec dictation software 10
3.3.1 Create a SpeechExec user profile 10
3.3.2 SpeechExec help 11
4 Use SpeechExec 12
4.1 Download recordings from a dictation
recorder 12
4.2
PR
OCreate a recording 12
4.3 Playback a recorded file 13
4.3.1 Playback using the SpeechMike or Pocket
Memo 13
4.3.2 Playback in the recorder window 14
4.3.3 Playback in the worklist window 14
4.4
PR
OEdit a previously recorded file 14
4.5
PR
OFinish, suspend or cancel a
recording 14
4.6
PR
ORecord an instruction 15
4.6.1
PR
ORecord a spoken instruction 15
4.6.2
PR
ORecord a special instruction 15
4.7 Delete 15
4.7.1
PR
ODelete part of a dictation file 15
4.7.2 Delete a dictation file 16
User manual
ENGLISH
4User manual
interference, which could aect performance.
• Back up your files. Philips is not responsible
for any loss of data.
Hearing safety
Observe the following guidelines when using
your headphones:
• Listen at reasonable volumes for reasonable
periods of time.
• Be careful not to adjust the volume higher as
your hearing adapts.
• Do not turn up the volume so high that you
can’t hear what’s around you.
• You should use caution or temporarily discon-
tinue use in potentially hazardous situations.
• Do not use headphones while operating a
motorized vehicle, cycling, or skateboarding,
etc. It may create a trac hazard and is illegal
in many areas.
Important (for models supplied with
headphones):
Philips guarantees compliance with the maxi-
mum sound power of its audio players as deter-
mined by relevant regulatory bodies, but only
with the original model of provided headphones.
If these headphones need replacement, we rec-
ommend that you contact your retailer to order
a Philips model identical to that of the original.
Small children
Your device and its enhancements may contain
small parts. Keep them out of the reach of small
children.
Cleaning and disinfection
• Unplug the device before cleaning.
• Use a soft cloth, if necessary dampened with
a minimum amount of water or diluted mild
soap, to clean the product.
• Products for disinfection of surfaces in clinical
areas and patient care equipment, such as
1 Important
This manual covers the basic installation of
the SpeechExec software and its related use
with the SpeechMike and Digital Pocket Memo
dictation hardware.
Not all devices mentioned in this manual
are necessarily part of the package contents.
Descriptions of devices and accessories are
for information only and do not require Philips
to deliver any of these accessories with this
package.
D Note
If a topic begins with this icon
PRO
, the described
feature is available to users of SpeechExec Pro
and Enterprise only.
E Tip
For more information about using the
SpeechExec software, see the help function
(press F1 on the keyboard).
Philips reserves the right to change products at
any time without being obliged to adjust earlier
supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other than
those specified herein, confirmation of their
validity and suitability must be obtained.
Safety
• To avoid a short circuit, do not expose the
product to rain or water.
• Do not expose the device to excessive heat
caused by heating equipment or direct sunlight.
• Protect the cables from being pinched,
particularly at plugs and the point where they
exit from the unit.
• All wireless devices may be susceptible to
5User manual
surface disinfectant wipes, can be used to
clean the device.
• Do not use harsh chemicals or strong
detergents.
• Do not rub or strike the surface with
anything hard as this may scratch or damage
the surface permanently.
Disposal of your old product
• Your product is designed and manufactured
with high quality materials and components
that can be recycled and re-used.
• When this crossed-out wheeled bin
symbol is attached to a product, it
indicates that the product is covered
by the European Directive 2002/96/EC.
• Become informed about your local separate
collection system for electrical and electronic
products.
• Act according to your local rules and do
not dispose of old products with normal
household waste. The correct disposal of old
products will help prevent potential negative
consequences for the environment and human
health.
• Batteries (including built-in rechargeable
batteries) contain substances that may pollute
the environment. All batteries should be
disposed of at an ocial collection point.
ENGLISH
6User manual
2.1 Overview SpeechExec work list window
The work list allows you to manage the dictation file list, define dictation properties and change
various settings.
1
2
3
4
6
5
7
1 The menu bar across the top organizes commands under menus.
2 The toolbar contains tools for creating, playing and editing dictation files. Related tools are
grouped together.
PR
OCreate a new dictation file
PR
OCreate a new dictation file for speech recognition
PR
OAdd to speech recognition queue
Open the selected dictation file in the SpeechExec player window
Start/stop playback of the selected dictation file
Displays the dictation properties of a file
PR
OAttach a document
2 Your SpeechExec dictation
software
Congratulations on your purchase and welcome
to Philips!
To fully benefit from the service that Philips
oers, visit our Website for support information
such as user manuals, software downloads,
warranty information and more:
www.philips.com/dictation.
7User manual
Display the General settings window
Display the settings window for a connected Philips Pocket Memo digital recorder
PR
ODisplay the settings window for a connected Philips SpeechMike microphone
Create a new email message with the selected dictation file attached
Refresh the information displayed in the work list
Start downloading from a connected Philips Pocket Memo digital recorder to a PC
PR
OSend and receive emails with dictations via a connected email system
Send emails with dictations via a connected email system
Open the help function
D Note
To customize the toobar, click Settings > General Settings on the menu bar and select Worklist
> Toolbar. Select the icon you wish to add from the left column and click the Add item button.
3 The folder list displays the folder structure. The structure depends on personal or pre-
configured settings. Click the plus sign at the left of a folder to expand the tree and display a
folder’s sub-folders.
4 The dictation file list displays information about the dictation files stored in the selected folder.
The columns display the properties of the dictation files. Change the focus between the tree
view and the dictation list view by clicking inside each pane.
5
PR
OThe recognition and adaptation queue panel displays information about dictation files
submitted for oine speech recognition. See 5.5 Speech recognition functions on page 18 for
more information.
6 Digital Pocket Memo device display: The Digital Pocket Memo display appears when a Digital
Pocket Memo is connected. It allows users to display and play back dictation files stored on the
Digital Pocket Memo, and to configure settings on the connected device.
7 The status bar at the bottom of the window displays information on dictation management such
as the number of dictation files in the selected folder, the number of dictation files with priority
status assigned, and the name and role of the current user.
PR
OActive author profile: Select the author profile from the drop-down list
ENGLISH
8User manual
2.2 Overview SpeechExec recorder and player window (expanded mode)
The recorder/player module is a desktop window that allows the user to record and playback sound
files.
9
11
12
812
14
15
13
10
8 The title bar displays the file name.
9 Instructions are recorded comments by the author that are directed to the person transcribing
the dictation file. See 4.6 Record an instruction on page 15 for more information.
PR
ORecord a special instruction
PR
OPlay back special instruction
PR
ODelete a special instruction
PR
OInsert an index mark
PR
ORecord a spoken instruction
Jump to the previous spoken instruction
Jump to the next spoken instruction
10 Control and positioning buttons:
PR
OMark the beginning of a section to be deleted
PR
OMark the end of a section to be deleted
PR
ORemove the deletion marks
PR
ODelete a marked section
PR
OUndo the last deletion
PR
OSwitches between Insert, Overwrite and Append modes
11 Position slider: Displays file information such as file length and the current position in the
sound file during recording or playback. The length of the recording is displayed in HH:MM:SS
(hours:minutes:seconds) above the slider.
12 Audio toolbar:
PR
OStart/stop recording
Start/pause playback
Stop the current action (recording, playback)
Jump to the beginning of the dictation
Fast rewind
Fast forward
Jump to the end of the dictation
Adjusts playback volume
Adjusts playback speed
Adjusts the playback tone
9User manual
PR
OAdjusts the record volume
Adjusts the playback balance
12 Show/hide the menu bar
13 Switch player window between compact and expanded mode
Displays the dictation properties dialog
PR
ODisplays the audio settings dialog
Opens the help function
14
PR
OFinish: Close the dictation file and mark it as finished. The dictation file is moved to the
Finished dictations folder.
15
PR
OSave as draft: Close the dictation file and mark it as suspended, meaning that work on the
dictation file is interrupted temporarily and will be continued at a later time. The dictation file is
saved in the Suspended folder.
ENGLISH
10 User manual
3 Get started
3.1 System requirements
• Pentium III, 500MHz and 512 MB RAM;
Recommended: Pentium IV or similar, 1 GHz
and 1 GB RAM
• 100 MB hard disk space for SpeechExec, 250
MB for Microsoft .NET Framework
• One free USB port
• Recommended minimum transfer rate for
LAN: 100 Mbit/s
• Windows 7, Windows Vista, Windows XP
D Note
For all operating systems, it is recommended
that the latest service pack available be installed
before installing SpeechExec.
3.2 Install the software
C Important
• Administrator rights are required to install
the software. For more help, contact your
administrator.
• For installation of SpeechExec, a license key is
required. The license key can be found on the
DVD envelope.
1 Turn on the computer.
2 Insert the installation DVD in the DVD-
ROM drive. The set-up program should
start automatically. If it does not, open the
DVD contents in Windows Explorer and
double-click the autorun.exe file.
3 Click the Install button.
4 Follow the on-screen instructions of the
set-up program.
3.3 Start SpeechExec dictation software
If the option to start SpeechExec automatically
was selected in the settings menu, open
the program by clicking the icon in the
notification area of the Windows task bar. To
manually start the program, open the Windows
start menu in Windows and select Programs >
SpeechExec (Pro) Dictate.
3.3.1 Create a SpeechExec user profile
When using SpeechExec for the first time, a
wizard guides you through the step-by-step
configuration process to create a new user
profile and configure your initial key settings.
Follow the on-screen instructions to:
• specify an author name that will be used to
identify your dictations
• define the name and the (network) path
where your finished dictations will be stored
• set the default Work type (letter, memo, fax or
report) assigned to new dictations.
• start another wizard to configure a Digital
Pocket Memo. See 5.2 Pocket Memo
Configuration Wizard on page 17 for more
information.
C Important
If you wish to use the speech recognition
features of SpeechExec and have already created
a user profile in Dragon NaturallySpeaking, use
the same name for your SpeechExec author
name. See 5.5 Speech recognition functions on
page 18 for more information.
D Note
It is possible to change these settings later using
the Settings menu. See 5.1 Settings menu on page
17 for more information.
11User manual
E Tip
If working in a network, select a folder on
a mapped network drive to store finished
dictations. Transcriptionists will then be able to
access the folder and map their pending folders
to your finished dictations folder.
3.3.2 SpeechExec help
For detailed information about using the
SpeechExec software, see the help function. To
start the help function:
• Press F1 on the keyboard
• Click the button on the toolbar in the
worklist or recorder window.
ENGLISH
12 User manual
4.2 PRO Create a recording
SpeechExec can be controlled during
recording using a Philips SpeechMike dictation
microphone, a Philips Pocket Memo dictation
recorder, or by clicking the toolbar buttons.
1 Start SpeechExec dictation software.
When using a SpeechMike with push
buttons:
2 Press the d RECORD key to create a new
recording and enter Record standby mode.
• The recorder window is displayed.
• The record indicator light flashes red (in
overwrite mode) or green (in insert and
append mode).
3 Press the e key and start speaking.
The record indicator light glows in red (in
overwrite mode) or green (in insert and append
mode) while recording.
4 For short pauses, press the e key. To
continue recording, press the e key again.
5 To stop recording, press the d RECORD key.
When using a SpeechMike or Pocket
Memo with slide switch (Rec, Stop, Play,
Rewind):
2 Move the slide switch to the REC position to
create a new recording and start speaking.
• The recorder window is displayed.
• The record indicator light glows in red (in
overwrite mode) or green (in insert and
append mode) while recording.
3 To stop recording, move the slide switch to
the f position.
When using a SpeechMike or Pocket
Memo with slide switch (Forward, Stop,
Play, Rewind):
2 Press the d RECORD key to create a new
recording and enter Record standby mode.
• The recorder window is displayed.
• The record indicator light flashes red (in
overwrite mode) or green (in insert and
append mode).
3 Move the slide switch to the PLAY position
and start speaking.
4 Use SpeechExec
Philips hardware devices are designed for
compatibility with SpeechExec and can also
be used to control the SpeechExec program.
For detailed information, refer to the
documentation delivered with the device.
4.1 Download recordings from a
dictation recorder
Use Philips SpeechExec software for automatic
download, conversion and routing of files
recorded with a Pocket Memo dictation
recorder.
1 Make a recording with the dictation
recorder.
2 Start SpeechExec.
3 Connect the Pocket Memo recorder to the
PC using the USB cable or the optional USB
docking station.
4 By default, the recordings on the recorder
will be downloaded automatically to the PC
and moved to the Finished dictations folder of
the work list.
E Tip
How and which files are downloaded after a
recorder is connected can be configured in
the settings menu of SpeechExec or with the
Configuration Wizard. See 5.3 Configure the
download process from the Pocket Memo on page
17 for more information.
D Note
When the recorder is connected to the PC
for the first time, Windows detects the new
hardware and automatically installs the required
drivers. When the installation is complete,
Windows may prompt you to restart the PC.
13User manual
4.3 Playback a recorded file
Various playback functions can be controlled
by the SpeechMike, the Pocket Memo or the
toolbar buttons in the recorder window or
worklist window.
4.3.1 Playback using the SpeechMike or
Pocket Memo
1 Double-click the dictation file in the work
list or select a dictation file.
The dictation file is opened in the recorder
window.
When using a SpeechMike with push
buttons:
2 To rewind, press and hold the c key on the
SpeechMike. When rewinding reaches the
desired position, release the c key.
3 To fast forward, press and hold the b key
on the SpeechMike. When forwarding
reaches the desired position, release the b
key.
4 To start playback, press the e key on the
SpeechMike. To stop playback, press the e
key again.
When using a SpeechMike or Pocket
Memo with slide switch (Rec, Stop, Play,
Rewind):
2 To rewind, move the slide switch to the
c position. When rewinding reaches the
desired position, move the slide switch to
the PLAY position.
3 To fast forward, move the slide switch to
the b position. When forwarding reaches
the desired position, move the slide switch
to the f position.
4 To start playback, move the slide switch to
the PLAY position. To stop playback, move
the slide switch to the f position.
The record indicator light glows in red (in
overwrite mode) or green (in insert and append
mode) while recording.
4 For short pauses, move the slide switch to
the f position. To continue recording,
move the slide switch back into the PLAY
position.
5 To stop recording, move the slide switch to
the f position and press the d RECORD
key.
6 Press the • EOL/• • PRIO key to mark the
recording as finished.
• The dictation file is moved to the Finished
dictations folder.
• The recorder window closes and the work list
window is displayed.
7 To assign priority status to the recording,
press the • EOL/• • PRIO key again within half
a second.
D Note
• For best results, speak clearly and keep the
microphone about 10 to 15 centimeters (4 to
6 inches) away from your mouth.
• During recording, the on-screen view
remains on the recorder window, while the
SpeechExec window may be visible in the
background. The SpeechExec window does
not accept user input until recording is
finished, canceled or suspended.
E Tip
• Click the button on in the recorder
window to adjust the recording volume.
• Use ‘Push-To-Dictate’ recording to start
recording immediately when pressing the
dRECORD key on the SpeechMike. When
releasing the dRECORD key, recording will
stop. ‘Push-To-Dictate’ can be enabled in the
Settings menu of the SpeechExec Recorder
window (under Audio Settings > Recording).
ENGLISH
14 User manual
4.4 PRO Edit a previously recorded file
A previously recorded file can be edited if
transcription has not begun. You can edit a file
by inserting an additional portion, overwriting
part of the recording or appending a recording
at the end of the file.
1 Double-click the dictation file in the work
list or select a dictation file.
The dictation file is opened in the recorder
window.
2 Set the desired edit mode (insert or
overwrite) before starting recording. To
switch between insert and overwrite modes,
press the INS/OVR key on the SpeechMike or
Pocket Memo while stopped or click on the
button on the toolbar in the recorder
window.
3 Play, forward or rewind to the position
where the insertion should be made.
4 Start recording. See 4.2
PR
OCreate a recording
on page 12 for more information about
recording.
4.5 PRO Finish, suspend or cancel a
recording
To mark a recording as finished, press the
• EOL/• • PRIO key on the SpeechMike or click
on the FINISH button in the recorder
window. The dictation file is moved to the
Finished dictations folder. SpeechExec oers
additional options for finished dictations, such as
conversion to a pre-defined format, sending via
email, uploading to an FTP server or copying to
the backup folder.
Alternatively, a recording can be marked as
suspended by clicking on the SAVE AS
DRAFT button in the recorder window. Mark a
recording as suspended to temporarily interrupt
recording and finish it later. The recording is
saved in the Suspended folder.
Clicking the CLOSE button in the recorder
window cancels the recording without saving it.
When using a SpeechMike or Pocket
Memo with slide switch (Forward, Stop,
Play, Rewind):
2 To rewind, move the slide switch to the
c position. When rewinding reaches the
desired position, move the slide switch to
the PLAY position.
3 To fast forward, press and hold the b or
FORWARD key. When forwarding reaches
the desired position, release the b/
FORWARD key.
4 To start playback, move the slide switch to
the PLAY position. To stop playback, move
the slide switch to the f position.
4.3.2 Playback in the recorder window
1 Double-click the dictation file in the work
list.
The dictation file is opened in the recorder
window.
2 To rewind, click the button on the
player toolbar. When rewinding reaches the
desired position, click the PLAY/PAUSE
button on the player toolbar.
3 To fast forward, click the button on the
player toolbar. When forwarding reaches the
desired position, click the PLAY/PAUSE
button on the player toolbar.
4 To start playback, click the PLAY/PAUSE
button on the player toolbar. To stop
playback, click again the PLAY/PAUSE
button on the player toolbar.
4.3.3 Playback in the worklist window
1 Select a dictation file and click the
PLAY/PAUSE button on the worklist toolbar
to start/stop playback.
15User manual
D Note
A spoken instruction can be deleted just like
any other part of a dictation file by deleting
the section of the recording that includes one
or more spoken instructions (see 4.7.1 Delete
part of a dictation file on page 15 for more
information) or by recording over the spoken
instruction (see 4.4
PR
OEdit a previously recorded
file on page 14 for more information about
the overwrite recording mode).
4.6.2 PRO Record a special instruction
1 Click the button in the recorder window.
2 Dictate the special instruction. Special
instructions are stored in a separate sound
file and attached to the dictation.
3 Click the button again in the recorder
window when the special instruction is
complete.
4 Click the button in the recorder window
to play back the special instruction.
5 Click the button in the recorder window
to delete the special instruction.
4.7 Delete
4.7.1 PRO Delete part of a dictation file
Follow these steps to delete a section from a
dictation file:
1 Navigate to the beginning of the section to
be deleted by playback or fast forward/fast
rewind.
2 Click the button in the recorder window.
3 Navigate to the end of the section to be
deleted.
4 Click the button in the recorder window.
The section is marked with a red frame in
the position slider.
5 Click the button in the recorder window
to delete the section or click the button
to remove the deletion marks (the red
frame) without deleting the section.
4.6
PR
ORecord an instruction
Instructions are recorded comments by
the author that are directed to the person
transcribing the dictation. SpeechExec supports
two types of instructions:
• Spoken instructions are stored within the
dictation sound file at the position where the
instruction was actually recorded. (Examples
of spoken instructions might include the
correct spelling of a name or technical term
or instructions to insert a new paragraph.)
• Special instructions are usually recorded at the
start of a dictation with special information
relating to the dictation. Special instructions
are stored in a separate sound file. (Examples
of special instructions might include document
formatting instructions, names of individuals to
receive copies, or delivery instructions.)
4.6.1
PR
ORecord a spoken instruction
1 The current dictation status must be
RECORD.
2 To add a spoken instruction:
• Click the button in the SpeechExec
recorder window.
• Press and hold the g key on the
SpeechMike with slide switch operation.
• Press and hold the INS/OVR key on the
SpeechMike with push button operation.
• Press the right SMART BUTTON on the
Pocket Memo.
3 Dictate the instruction. The instruction will
be recorded into the dictation file without
overwriting your dictation.
4 Click the button again or release the
button on the SpeechMike when the
spoken instruction is complete. The spoken
instruction is displayed as a white bar in the
position slider.
5 Continue or stop recording.
ENGLISH
16 User manual
6 Click the button to undo the last
deletion.
4.7.2 Delete a dictation file
Follow these steps to delete a dictation file
entirely:
1 Select the dictation files to be deleted in the
work list. To select more than one file, press
and hold SHIFT on the keyboard and click on
the files to be selected.
2 Click on Edit > Delete on the menu bar or
press the DELETE key on the keyboard to
delete the selected dictation files.
17User manual
1 Connect the Pocket Memo to the PC using
a USB cable.
2 Start Philips SpeechExec Dictate software.
3 Click Settings > General Settings on the
menu bar of SpeechExec to open the settings
menu and select DPM/DT Configuration >
DPM Wizard from the list on the left side.
4 Click the Start Wizard... button to open the
wizard. Follow the on-screen instructions to
customize the Pocket Memo.
5 Click the Finish button to close the wizard
and confirm the transfer of the new settings
to the Pocket Memo.
5.3 Configure the download process
from the Pocket Memo
How and which files are downloaded after a
Pocket Memo is connected can be configured in
the settings menu or the Configuration Wizard.
1 Connect the Digital Pocket Memo to the PC
using the USB cable.
2 Click Settings > General Settings on the
menu bar, select DPM/DT Configuration >
DPM Settings from the list on the left side.
3 Click the Start... button. The DPM configu-
ration dialog is displayed in a new window.
4 Select Download in the left pane.
5 Select which files will be downloaded
(download file type):
• All files
• EOL (recordings marked as finished/end-
of-letter)
• File selection (SpeechExec prompts the
selection of specific files to be downloaded)
• File with keyword 1 (specify a keyword)
6 The download settings also allow the user
to specify if files will be deleted on the
Pocket Memo after they are downloaded.
7 Click OK to save the settings and confirm
the transfer of the new settings to the
Pocket Memo.
5 Use more of SpeechExec
5.1 Settings menu
The General Settings dialog allows personalization
of a variety of application settings such as dicta-
tion options, encryption, user profiles, delivery
rules, software updates and work list options. It
also allows the configuration of a SpeechMike as
well as a foot control, Digital Pocket Memo or
Digital Desktop and recorder/player settings.
1 Click Settings > General Settings on the
menu bar to open the settings menu. The left
pane contains the list of the available settings.
2 Select an option in the list to display the
associated options on the right pane.
3 Click Apply to save the changes or click OK
to save the settings and close the dialog.
C Important
All or some of the settings can be pre-
configured and locked by your system
administrator. Locked settings are read-only.
5.2 Pocket Memo Configuration Wizard
The Pocket Memo Configuration Wizard guides
users through the device configurations and
settings of their Pocket Memo. The wizard
assists users in configuring the time format,
sound feedback, voice-activated recording,
display appearance (standard or advanced display
mode), the recording format, microphone
sensitivity, author names, and settings for file
download to the PC.
ENGLISH
18 User manual
core) or equivalent AMD processor. SSE2
instruction set required. 512 KB L2 Cache.
Recommended: 1 MB.
• 512 MB RAM (1 GB for Windows Vista, and
2 GB for Windows 7). Recommended: 1 GB
(2 GB for Windows 7 32-bit, and 4 GB for
Windows 7 64-bit)
• 1 GB free hard disk space (2 GB for localized
non-English versions)
• Windows Server 2003, Windows XP (SP2 and
SP3, 32-bit) Windows Vista (SP1 and SP2, 32-
bit and 64-bit), Windows 7 (32-bit and 64-bit)
• DVD-ROM drive required for installation
• Creative Labs Sound Blaster 16 or equivalent
sound card supporting 16-bit recording
• Philips SpeechMike dictation microphone or
Philips Pocket Memo dictation recorder
5.5.2 PRO Setting up speech recognition
SpeechExec Pro installs only the necessary files
and components to access the recognition ap-
plication functionalities. The Dragon Naturally-
Speaking speech recognition application must be
purchased and installed separately. For informa-
tion on the installation, configuration, training,
and adaptation of Dragon NaturallySpeaking, see
the Dragon NaturallySpeaking user manual.
To use Dragon NaturallySpeaking for speech
recognition, a Dragon user profile with a valid
user name and and dictation source is required.
User profiles can be installed on the local hard
drive (C:), or can live on a server and can be
accessed through a network connection (roam-
ing profiles). When using a Philips SpeechMike
microphone, use the USB microphone setting in
Dragon NaturallySpeaking. It is recommended
to perform training when creating a Dragon
user profile to enhance your initial recognition
accuracy.
Before using the speech recognition feature, the
following settings must be made:
• Enable the speech recognition functions in
the SpeechExec seetings menu under Settings
> General settings > Speech recognition >
5.4
PR
OSpeechMike Configuration Wizard
The SpeechMike Configuration Wizard guides
users through the device configurations and
settings of their SpeechMike.
1 Connect the SpeechMike to the PC.
2 Start Philips SpeechExec Dictate software.
3 Click Settings > General Settings on the
menu bar of SpeechExec to open the settings
menu and select SpeechMike Configuration
> Configuration Wizard from the list on the
left side.
4 Click the Start Wizard... button to open the
wizard. Follow the on-screen instructions to
customize the SpeechMike.
5 Click the Finish button to close the wizard
and save the new settings.
5.5
PR
OSpeech recognition functions
SpeechExec Pro handles the complete dictation
and transcription workflow including the
integration of Dragon NaturallySpeaking speech
recognition, allowing the user to control
the entire process from dictation, speech
recognition and correction to the final text
document in SpeechExec.
C Important
To activate the speech recognition functions, an
additional SpeechExec license is required. For
more information about upgrading, contact your
local Philips dealer.
If you have already purchased a speech
recognition license for SpeechExec, click on
Help > License information on the menu bar to
activate the license.
5.5.1
PR
OSystem requirements for speech
recognition
• Dragon NaturallySpeaking Professional
(Service Pack 1 and higher)
• Intel Pentium4 or later or AMD Athlon 64 1
GHz. Recommended: 2.4 GHz (1.6 GHz dual
19User manual
Online speech recognition:
1 Create a speech-recognizable dictation file
in SpeechExec by selecting New with
speech recognition from the toolbar or the
File menu.
The SpeechExec Speech Recognition Recorder
window opens.
2 Start recording. See 4.2
PR
OCreate a recording
on page 12 for more information about
recording.
As you talk, your words are transcribed onto
your screen. Corrections to the transcribed text
can be made during recording or when recording
is complete.
3 To mark the previous or the next word
for editing or correcting, press the c or
b key on the SpeechMike briefly. Press the
• EOL/• • PRIO key repeatedly to mark one
or more words previous to the cursor. To
display the correction or spell dialog of
Dragon NaturallySpeaking, select the word
recognized incorrectly and press the INS/
OVR key on the SpeechMike. If no text is
selected, the word or phrase previous to the
cursor is taken into account.
E Tip
Define the dialog to be displayed when the
INS/OVR key is pressed under Settings >
General Settings > Speech Recognition >
Recording settings.
4 When the recording is complete, select one
of the following options from the toolbar or
the File menu:
• Finish and archive: The dictation file is
moved to the Archive folder and the status
is set to Transcription finished. A Text
document (.rtf) containing the transcribed
text is attached to the dictation file.
• Send for correction: The dictation file is
moved to the Finished dictations folder
and the status is set to Correction pending.
A Text document (.rtf) containing the
transcribed text is attached to the
dictation file.
• Save as draft: Mark a recording as
suspended to temporarily interrupt
recording and finish it later. The recording
Speech recognition settings.
• Select your Dragon user profile and train it,
if not yet done, through the Train button.
The Dragon user profile and the dictation
source must be set up separately in Dragon
NaturallySpeaking.
The following settings are optional:
• Enable the use of roaming user profiles
under Settings > General settings > Speech
recognition > Speech recognition settings.
• Enable the use of templates under Settings
> General settings > Speech recognition >
Templates if you want the text to be inserted
into a predefined text document.
• Enable the automatic start of the recognition
queue under Settings > General settings
> Speech recognition > Recognition &
adaptation to process dictation files newly
added to the recognition queue automatically.
• Enable the automatic collection of corrected
dictation files for adaptation under Settings
> General settings > Speech recognition >
Recognition & adaptation to make adaptations
on Dragon user profiles based on the
corrected speech-recognized documents.
• Activate the option Send files for speech
recognition after DPM download under Settings
> General Settings > DPM/DT Configuration
> Speech recognition to have dictation
files automatically processed with speech
recognition when they are downloaded from
the Pocket Memo recorder.
D Note
If this option is activated, the conversion,
encryption and delivery after download
options are disabled.
5.5.3
PR
OUsing speech recognition
SpeechExec supports two types of speech
recognition. Your words are transcribed onto
your screen as you dictate (online speech
recognition) or files that where previously
recorded (e.g. on a handheld recorder) are
transcribed when they are downloaded to your
computer (oine speech recognition).
ENGLISH
20 User manual
5.5.4 PRO Playback and correction of
transcribed recordings
1 Double-click the dictation file in the work
list.
The dictation file is opened in the correction
window.
2 Use the buttons on the toolbar of the
correction window, the SpeechMike or the
Pocket Memo to rewind, forward and start
playback. See 4.3 Playback a recorded file on
page 13 for more information.
Each segment of the sound file is bookmarked
in the text document with the relevant time
position and length. The transcribed text is
simultaneously highlighted during playback,
forwarding and rewinding.
D Note
• If too much editing or correction is made on
the transcribed text or the entire flow of the
document is changed, highlighting may not
work properly.
• If parts of the transcribed text are deleted,
the related sound parts will remain in the
sound file.
• Dictation files with the status Transcription
finished can be opened only for playback.
Editing or correction is not possible.
• For making corrections in the transcribed
document in the correction window, the
installation of Dragon NaturallySpeaking is
not required.
5.6 Send dictation files by email or to an
FTP server
SpeechExec allows dictation files to be
transferred via email or uploaded to an FTP
server directly to the transcriptionist or any
other recipient.
is saved in the Suspended folder.
Oine speech recognition:
1 Download a previously recorded file from
a dictation recorder (see 4.1 Download
recordings from a dictation recorder on page
12 for more information) or create a new
dictation file in SpeechExec by selecting
New from the toolbar or the File menu (see
4.2 PRO Create a recording on page 12 for
more information).
2 Select one or more dictation files from the
work list.
3 Click the Add to speech recognition
queue button on the toolbar to queue the
selected files for speech recognition in the
recognition and adaptation queue panel.
4 Click the Start recognition queue button
in the recognition and adaptation queue
panel to start the speech recognition
process.
When the speech recognition process is
finished, the dictation file is moved to the
Finished dictations folder and the status is set
to Correction pending. A Text document (.rtf)
containing the transcribed text is attached to
the dictation file.
C Important
• If you wish to use oine speech recognition,
the name of the user profile in Dragon
NaturallySpeaking must be identical to your
SpeechExec author name and the author
name used for recordings on a handheld
dictation recorder.
• Speech recognition is not supported for
dictation files with the following recording
formats:
• .wav files with a sampling rate of less than
11kHz.
• .dss files recorded in Long Play or Long
Play mobile format.
21User manual
toolbar to create a new email message with
the selected dictation file attached:
• When no email profile has been set up,
the email message is created with the PC’s
default email application.
• When an email profile has been
configured, an email message is created
with the selected dictation file attached.
Enter recipients, body text and additional
attachments and click the OK button to
save the message in SpeechExec’s Outbox
folder.
3 Click File > Submit for FTP upload on
the menu bar to copy the selected dictation
file(s) to SpeechExec’s Outbox folder.
4 Click the Send and Receive button on
the toolbar to transfer all dictation files
in the Outbox. See 5.6.5 Send and receive
automatically on page 22 for more
information about sending dictation files in
the Outbox automatically.
5.6.4 Automatically send dictation files
via email or to an FTP server
Dictation files can be sent by email or to an FTP
server automatically when a recording is finished
or when files are downloaded from a Pocket
Memo digital recorder.
1 Click Settings > General Settings on the
menu bar to open the settings menu.
2 Select Dictation > Dictation finished from
the list on the left side to set up automatic
sending when a dictation file is finished.
Activate the Email and/or the FTP option.
3 Select DPM/DT Configuration > Delivery
after download from the list on the left side
to set up automatic sending after a dictation
file is downloaded from a Digital Pocket
Memo. Activate the Email and/or the FTP
option.
4 Click the Configure button to set up default
contents for emails (recipients, subject, body
text, attachments).
5 Click the OK button to save the settings.
Dictation files are now copied automatically
5.6.1 Set up an email profile
D Note
When no email profile has been set up, emails
are sent via the default email application of the
PC (e.g. Microsoft Outlook).
To transfer dictation files directly by SpeechExec
without using the PC’s default email application
set up an email profile:
1 Click Settings > General Settings on the
menu bar to open the settings menu and
select Delivery > Email from the list on the
left side.
2 Deselect the option Use your default emailing
program to send dictations (QuickSend).
3 Click the Add... button to add a new profile.
Select a type of profile, enter a profile
name and click the OK button. The settings
window for the selected profile is displayed.
4 Enter the settings for the selected profile
and click the OK button.
5.6.2 Set up an FTP profile
An FTP profile must be created before the FTP
upload function can be used.
1 Click Settings > General Settings on the
menu bar to open the settings menu and
select Delivery > FTP from the list on the
left side.
2 Click the Add... button to add a new profile.
3 Enter a profile name and fill in the settings
for the FTP server.
4 Click the OK button to save the settings.
5.6.3 Manually send dictation files via
email or to an FTP server
Sending dictation files by email or to an FTP
server can be done manually or automatically.
To transfer dictation files manually:
1 Select one or more dictation files from the
work list.
2 Click the Submit for email button on the
ENGLISH
22 User manual
to the Outbox folder when a recording is
finished or when files are downloaded from
a Digital Pocket Memo.
6 Click the Send and Receive button on
the toolbar to transfer all dictation files
in the Outbox. See 5.6.5 Send and receive
automatically on page 22 for more
information about sending dictation files in
the Outbox automatically.
D Notes
• The Outbox folder is hidden by default. To
display the Outbox folder in the Folder tree,
click on Settings > General Settings on the
menu bar and select Work list > Folders from
the list on the left side. Select Outbox and
change the Visible option to Yes .
• A separate email is created for every dictation
file.
5.6.5 Send and receive automatically
By default, dictation files in the Outbox folder
are transferred only after clicking the Send
and Receive button on the toolbar. To transfer
dictations automatically:
1 Click Settings > General Settings on the
menu bar to open the settings menu and
select Delivery > Send/Receive from the list
on the left side.
2 Activate the option Send/Receive
automatically and set a time interval.
3 Click the OK button to save the settings.
23User manual
• Set via Start > Control Panel > Sound >
Playback (tab)
• Or, right-click the speaker icon if it’s in your
toolbar and select playback devices
Drive letter conflict with the Digital
Pocket Memo
When installing the Digital Pocket Memo
on a PC with Windows, the operating
system automatically assigns a drive
for the Digital Pocket Memo. This
drive appears as a “removable disk” in
Windows Explorer. Sometimes the drive
letter assignment for the Digital Pocket
Memo conflicts with an existing drive
letter mapping; this is why the Digital
Pocket Memo cannot be seen in Windows
Explorer and SpeechExec displays the
status as “DPM (disconnected).”
Map all network drives starting with drive
letters Z, Y, X (in reverse alphabetical order).
6 Frequently asked questions
The operating system stops responding
after restart
Using the Philips SpeechMike together
with certain USB hubs may cause the
operating system to stop responding
when the computer is started.
Unplug the SpeechMike before starting the PC
and reconnect it afterwards. We recommend
replacing the USB hub or connecting your
SpeechMike directly to the USB port of the
computer.
The SpeechMike is completely without
function
Some computer providers limit the
output power of USB ports to 100mA.
These ports may not provide enough
power for the SpeechMike to function
properly.
Use the AC charger.
Connect the SpeechMike via the self-powered
hub.
The SpeechMike is connected to the
computer but sound will play on the
computer’s speaker only
Windows XP can support only one
playback device at a time and may require
setting the playback device back to
“SpeechMike” if another playback device
was enabled after the SpeechMike was
installed.
• Set via Start > Control Panel > Sound and
Audio Devices > Audio (tab)
• Or, right-click the speaker icon if it’s in the
toolbar and select Adjust Audio Properties
Windows Vista can support more than
one playback device at a time, but if you
disable the device for playback it is also
disabled for recording. You may need
to right-click and select “Show disabled
devices” to change the setting.
ENGLISH
24 User manual
Specifications are subject to change without notice.
© 2013 Speech Processing Solutions GmbH. All rights reserved.
Philips and the Philips’ shield emblem are registered trademarks of Koninklijke Philips N.V. and are used by Speech Processing Solutions
GmbH under license from Koninklijke Philips N.V. All trademarks are the property of their respective owners.
Document Version 1.0, 27/01/2014.