Philips DS3400/37 User Manual
Displayed below is the user manual for DS3400/37 by Philips which is a product in the Docking Speakers category. This manual has pages.
Related Manuals
Register your product and get support at
www.philips.com/welcome
Always there to help you
DS3400/37
User manual
Question?
Contact
Philips
1
Contents
1 Important 2
Safety 2
Compliance 3
Care of the environment 3
Notice 4
2 Your Docking Speaker 4
Introduction 4
What's in the box 4
Overview of the main unit 5
3 Get started 5
Connect power 5
Turn on 6
4 Play 6
Play from iPod/iPhone 6
Play from an external device 8
Adjust volume 9
5 Specications 9
Amplier 9
General information 9
6 Troubleshooting 10
EN
2EN
1 Important
Safety
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
h Do not install near any heat sources such
as radiators, heat registers, stoves, or
otherapparatus(includingampliers)that
produce heat.
i Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety.
Iftheprovidedplugdoesnottinto
your outlet, consult an electrician for
replacement of the obsolete outlet.
j Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
k Only use attachments/accessories
speciedbythemanufacturer.
l Use only with the cart, stand, tripod,
bracket,ortablespeciedbythe
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
m Unplug this apparatus during lightning
storms or when unused for long periods
of time.
n Referallservicingtoqualiedservice
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
o Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to
the unit:
• Install all batteries correctly, + and - as
marked on the unit.
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• Remove batteries when the unit is not
used for a long time.
• Batteries (battery pack or batteries
installed) shall not be exposed to
excessiveheatsuchassunshine,reor
the like.
• Perchlorate Material - special handling
may apply. See www.dtsc.ca.gov/
hazardouswaste/perchlorate.
p Apparatus shall not be exposed to
dripping or splashing.
q Do not place any sources of danger on
theapparatus(e.g.liquidlledobjects,
lightedcandles).
r Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
3EN
the disconnect device shall remain readily
operable.
s This product may contain lead and
mercury. Disposal of these materials
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
Alliance: www.eiae.org.
Compliance
Anychangesormodicationsmadetothis
product that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Notice for the USA
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy
and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
• Relocate the receiving antenna.
• Increase the separation between
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
The set complies with the FCC-Rules, Part-
15. Operation is subject to the following two
conditions:
• This device may not cause harmful
interference, and
• This device must accept any interference
received, including interference that may
cause undesired operation.
Notice for Canada
This Class B digital apparatus complies with
Canadian ICES-003.
This device complies with Industry Canada
licence-exempt RSS standard(s): Operation
is subject to the following Two conditions:(1)
this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired
operation of the device.
Note
•The type plate is located in the battery compartment.
Care of the environment
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, and old equipment.
Recycling the product
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
4EN
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
Please visit www.recycle.philips.com for
additional information on a recycling center in
your area.
Notice
“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has been
designedtoconnectspecicallytoiPodor
iPhonerespectively,andhasbeencertiedby
the developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note that
the use of this accessory with iPod or iPhone
may affect wireless performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
Specicationsaresubjecttochangewithout
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
2 Your Docking
Speaker
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfromthe
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this docking speaker, you can
• enjoy audio from the iPod/iPhone, and
other external audio devices; and
• synchronize the iPod/iPhone with your
computer through USB socket.
What's in the box
Check and identify the contents of your
package:
• Main unit
• AC power adaptor
• Quick start guide
• Safety sheet
5EN
Overview of the main unit
a Dock for the iPod/iPhone
b /
• Adjust volume.
• As LED indicators, show system status.
c
• Turn the docking speaker on.
• Switch the docking speaker to standby
mode.
d Power supply socket
• Connect AC power.
e
• Sync with PC through a USB cable.
f AUDIO-IN
• Connect an external audio device.
a
b
c
d
e
f
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
This docking speaker can be powered by either
AC power or batteries.
Option 1: AC power
Caution
•Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
•Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
Connect the AC power adaptor to:
• the power socket at the back of the
docking speaker.
• the wall socket.
Option 2: Battery power
Caution
•Risk of explosion! Keep batteries away from heat,
sunshineorre.Neverdiscardbatteriesinre.
•Remove batteries if they are exhausted or will not be
used for a long time.
•Batteries contain chemical substances, so they should
be disposed of properly.
6EN
Open the battery compartment.
1 Insert 4 x 1.5V AA batteries with correct
polarity (+/-) as indicated.
2 Close the battery compartment.
Turn on
Press to turn the docking speaker on.
» The / LED indicators light up.
Switch to standby mode
The docking speaker switches to standby mode
in the following situation:
• Press again;
• The speaker is idle for 15 minutes when
powered by AC supply.
» The / LED indicators light off.
4X1.5V UM3/LR6
4 Play
Play from iPod/iPhone
You can enjoy audio from your iPod/iPhone
through this docking speaker.
Compatible iPod/iPhone
The docking speaker supports the following
iPod and iPhone models:
Made for.
• iPod touch (5th generation)
• iPod nano (7th generation)
• iPhone 5
Listen to the iPod/iPhone
To enjoy more features, you are recommended
to install the free ClockStudio app.
1 Press to turn the docking speaker on.
» The LED indicators light up.
2 Insert the iPod/iPhone into the dock.
3 Forrst-timeuse,youwillbeaskedto
install ClockStudio app on your iPod/
iPhone.
4 Tap [Yes] (yes) to accept the installation
request.
5 Follow the on-screen instructions to
complete the installation.
7EN
6 Launch the app after the installation.
7 Play audio on your iPod/iPhone.
» Audio comes out through this docking
speaker.
Note
•With the ClockStudio app, you can enjoy radio, set
clock and alarm, adjust sound settings, and update
rmwareifnecessary.
Updatermware
Ifrmwareupdateisavailable,theClockStudio
app will search for it automatically and ask you
to download it.
Note
•Make sure that your iPod/iPhone is inserted in the
docking speaker and connected to the Internet.
1 Ifanewrmwareupdateisfound,tapOK.
2 Follow the on-screen instructions to
completethermwareupdate.
8EN
Note
•Do not disconnect power or undock the iPod/iPhone
during the updating process.
Charge the iPod/iPhone
Note
•If the docking speaker is operated on the batteries, you
cannot charge your iPod/iPhone.
When the docking speaker is connected to
AC power, the docked iPod/iPhone begins to
charge.
Sync iPod/iPhone with PC
Note
•MakesurethatiTuneshasbeenconguredproperlyin
your PC.
1 Insert the iPod/iPhone in the dock.
2 Press to switch to standby mode.
» The LED indicators light off.
3 Connect your docking speaker and PC
with a USB cable.
4 Launch iTunes to synchronize your docking
speaker with PC.
» The docked iPod/iPhone is
synchronized with PC successfully
through the iTunes.
Note
•Due to different materials and product techniques,
some USB cables may not work with this device.
Play from an external device
With this docking speaker, you can also enjoy
audio from an external device such as an MP3
player.
Note
•Make sure that there is no audio detected from docking
connector in the speaker.
1 Press to turn the docking speaker on.
2 Connect the MP3 link cable (not supplied)
to:
• the AUDIO-IN socket at the back of
the docking speaker.
• the headphone socket on an external
device.
3 Play audio on the device (see the device's
user manual).
9EN
Adjust volume
To adjust volume:
• Press +/- on your docking speaker; or
• Adjust the volume control of your
iPod/iPhone or external device.
Tip
•If the docking speaker is powered by batteries, the
volume is lower than that by AC supply.
5 Specifications
Amplier
Rated Output Power 2 X 5 W RMS
General information
Power supply
- AC Power
- Battery
Model:
KSAS0151200150HE;
Input: 100-240 V ~,
50/60Hz, 0.4A;
Output: 12 V 1.5 A
4 x AA (LR6) batteries
Operation Power Con-
sumption
<10.5 W
Standby Power Con-
sumption
<0.5 W
Max. load for iPod/
iPhone
5 V 1 A
Dimensions
- Main Unit (W x H x D) 274 x 143 x 109 mm
Weight
- Main Unit 1.1 kg
10 EN
6 Troubleshooting
Warning
•Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
•Make sure that the AC power adaptor of
the device is connected properly.
•Make sure that there is power at the AC
outlet.
•Make sure that the batteries have been
installed correctly.
No sound or poor sound
•Adjust the volume of your docking speaker.
•Adjust the volume of your iPod/iPhone or
external audio device.
No response from the unit
•Disconnect and reconnect the AC power
plug, and then switch on the device again.
Cannot sync with PC
•Switch the docking speaker to standby
mode.
•Try another USB cable.
•Install iTunes in PC properly.
Specifications are subject to change without notice
© 2013 Koninklijke Philips Electronics N.V.
All rights reserved.
DS3400_37_UM_V1.0