Philips FWM400D/37 User Manual

Displayed below is the user manual for FWM400D/37 by Philips which is a product in the Home Audio Systems category. This manual has pages.

Related Manuals

Philips FWM400D/05 Manual

Philips AJ3600/37 Manual

Philips VOIP4332B/37 Manual

Philips MCM275/37 Manual

Philips VOIP4331B/37 Manual

Philips by Signify 379330686 Manual

Philips by Signify 379320686 Manual

Philips by Signify 377160686 Manual

www.philips.com/welcome

Always there to help you

Question?

Contact

Philips

EN User Manual 3

ES Manual del usuario 23

FR Mode d’emploi 43

FWM400D

FWM400D_37_UM_V1.0.indb 1 8/29/2012 2:27:41 PM

English

Contents

1 Important 4

Important Safety Instructions 4

2 Your Mini Hi-Fi System 5

Introduction 5

What's in the box 5

Overview of the main unit 6

Overview of the remote control 7

3 Get started 9

Connect speakers 9

Connect FM antenna 9

Prepare the remote control 9

Connect power 9

Set clock 10

Turn on 10

4 Play 11

Basic play operations 11

Play disc 11

Play from iPod/iPhone 11

Play from USB 12

Play audio from an external device 12

5 Play options 12

Adjust sound 12

Repeat and shufe play 12

Program tracks 13

Display different information 13

6 Listen to FM radio 13

Tune to FM radio stations 13

Store FM radio stations automatically 13

Store FM radio stations manually 14

Select a preset radio station 14

7 Other features 14

Set alarm timer 14

Set sleep timer 15

8 Product information 15

Specications 15

USB playability information 16

Supported MP3 disc formats 16

Maintenance 16

9 Troubleshooting 17

10 Notice 18

Disposal of your old product and

batteries 19

FWM400D_37_UM_V1.0.indb 3 8/29/2012 2:27:42 PM

4EN

1 Important

Important Safety Instructions

a Read these instructions.

b Keep these instructions.

c Heed all warnings.

d Follow all instructions.

e Do not use this apparatus near water.

f Clean only with dry cloth.

g Do not block any ventilation openings.

Install in accordance with the

manufacturer's instructions.

h Do not install near any heat sources such

as radiators, heat registers, stoves, or

other apparatus (including ampliers) that

produce heat.

i Do not defeat the safety purpose of

the polarized or grounding-type plug.

A polarized plug has two blades with

one wider than the other. A grounding

type plug has two blades and a third

grounding prong. The wide blade or the

third prong are provided for your safety.

If the provided plug does not t into

your outlet, consult an electrician for

replacement of the obsolete outlet.

j Protect the power cord from being

walked on or pinched, particularly at

plugs, convenience receptacles, and the

point where they exit from the apparatus.

k Only use attachments/accessories

specied by the manufacturer.

l Use only with the cart, stand, tripod,

bracket, or table specied by the

manufacturer or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

m Unplug this apparatus during lightning

storms or when unused for long periods

of time.

n Refer all servicing to qualied service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or

has been dropped.

o Battery usage CAUTION – To prevent

battery leakage which may result in bodily

injury, property damage, or damage to the

remote control:

• Install all batteries correctly, + and - as

marked on the remote control.

• Do not mix old and new batteries.

• Remove batteries when the remote

control is not used for a long time.

• The batteries shall not be exposed to

excessive heat such as sunshine, re or

the like.

p Apparatus shall not be exposed to

dripping or splashing.

FWM400D_37_UM_V1.0.indb 4 8/29/2012 2:27:42 PM

English

q Do not place any sources of danger on

the apparatus (e.g. liquid lled objects,

lighted candles).

r This product may contain lead and

mercury. Disposal of these materials

may be regulated due to environmental

considerations. For disposal or recycling

information, please contact your local

authorities or the Electronic Industries

Alliance: www.eiae.org.

s Where the MAINS plug or an appliance

coupler is used as the disconnect device,

the disconnect device shall remain readily

operable.

Warning

•Never remove the casing of this apparatus.

•Never place this apparatus on other electrical

equipment.

•Never look into the laser beam inside this apparatus.

2 Your Mini Hi-Fi

System

Congratulations on your purchase, and

welcome to Philips! To fully benet from the

support that Philips offers, register your product

at www.philips.com/welcome.

Introduction

With this Hi-Fi system, you can:

• enjoy audio from discs, USB device, iPod/

iPhone, and other external devices; and

• listen to FM radio stations.

To enrich sound, this Hi-Fi system offers you

these sound effects:

• Digital Sound Control (DSC)

• Dynamic Bass Boost (DBB)

• Max sound for instant power boost

The Hi-Fi system supports these media formats:

What's in the box

Check and identify the contents of your package:

• Main unit

• Remote control (with batteries)

• Speaker box (x 2)

• FM antenna

• MP3 link cable

• User manual

• Quick start guide

FWM400D_37_UM_V1.0.indb 5 8/29/2012 2:27:43 PM

6EN

Overview of the main unit

• Turn the Hi-Fi system on.

• Switch to standby or Eco power

standby mode.

b ALBUM/PRESET +/-

• Select a preset radio station.

• Skip to the previous or next album.

• Navigate through iPod/iPhone menu.

FWM400D_37_UM_V1.0.indb 6 8/29/2012 2:27:44 PM

English

c /

• Stop play or erase a program.

• Start or pause play.

d DISC

• Select disc source.

e iPhone/iPod

• Select iPod/iPhone source.

f Volume control

• Adjust volume.

g MP3 LINK

• Connect an external audio device.

h Dock for iPhone/iPod

i USB DIRECT

• USB socket.

j MP3 LINK/USB

• Select MP3 link or USB source.

k TUNER

• Select tuner source.

l /

• Skip to the previous or next track.

• Search within a track or disc.

• Tune to a radio station.

• Adjust time.

• Open or close the disc tray.

n Display panel

• Show current status.

Overview of the remote

control

• Turn the Hi-Fi system on.

• Switch to standby or Eco power

standby mode.

b OPEN/CLOSE

• Open or close the disc tray.

FWM400D_37_UM_V1.0.indb 7 8/29/2012 2:27:46 PM

8EN

c CD

• Select disk source.

d MP3 LINK/USB

• Select MP3 link or USB source.

e DISP/MUTE

• Mute or unmute sound.

• Show current information.

f Numeric keypad

• Select a track from a disc directly.

• Select a preset radio station directly.

g PROG/CLOCK SET

• Set time.

• Program tracks and radio stations.

h SLEEP/TIMER

• Set alarm or sleep timer.

i DSC

• Select a preset sound setting.

j DBB

• Turn dynamic bass enhancement on/

off.

k REPEAT/SHUFFLE

• Play tracks repeatedly or randomly.

l VOL +/-

• Adjust volume.

m MAX

• Turn instant power boost on/off.

n /MENU

• Stop play.

• Erase a program.

• Navigate through iPod/iPhone menu.

o iPhone/iPod

• Select iPod/iPhone source.

p /

• Search within a track or disc.

• Tune to a radio station.

• Skip to the previous or next track.

• Adjust time.

• Start or pause play.

r PRESET/ALBUM

• Select a preset radio station.

• Skip to the previous or next album.

• Navigate through iPod/iPhone menu.

s TUNER

• Select tuner source.

FWM400D_37_UM_V1.0.indb 8 8/29/2012 2:27:47 PM

English

3 Get started

Caution

•Use of controls or adjustments or performance of

procedures other than herein may result in hazardous

radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in

sequence.

Connect speakers

Insert speaker wires completely into the

speaker sockets at the back of the Hi-Fi system.

Connect FM antenna

Connect FM antenna to the FM ANT socket at

the back of the Hi-Fi system.

Prepare the remote control

Caution

•Risk of explosion! Keep batteries away from heat,

sunshine or re. Never discard batteries in re.

•Risk of decreased battery life! Never mix different

brands or types of batteries.

Before using the remote control, install two

AAA batteries with correct polarity (+/-) as

indicated.

Connect power

Caution

•Risk of product damage! Make sure that the power

supply voltage corresponds to the voltage printed on

the head of the AC power cord.

•Risk of electric shock! When you unplug the power

cord, always pull the plug from the socket. Never pull

the cord.

Note

•Before connecting the AC power cord, make sure that

you have completed all other connections.

FWM400D_37_UM_V1.0.indb 9 8/29/2012 2:27:48 PM

10 EN

Connect the AC power cord to the wall power

socket.

Set clock

1 In standby mode, press and hold CLOCK

SET for 2 seconds.

» [SET CLOCK] (set clock) scrolls on

the display, then [24 HOUR] (24 hour)

or [12 HOUR] (12 hour) blinks.

2 Press / to select 12/24 hour format.

3 Press CLOCK SET to conrm.

» The hour digits blink.

4 Repeat steps 2-3 to set the hour and

minute.

Tip

•To exit clock setting mode, press .

•If clock is not set yet, when iPod/iPhone is connected,

the system synchronizes time from the iPod/iPhone

automatically.

Turn on

Press .

» The Hi-Fi system switches to the last

selected source.

Switch to standby mode

Press to switch the Hi-Fi system to standby

mode.

» The clock (if set) appears on the display

panel.

To switch the system to Eco Power Standby

mode:

In standby mode, press and hold for 2

seconds.

» [ECO POWER] (Eco power) scrolls on the

display, then the backlight turns off.

FWM400D_37_UM_V1.0.indb 10 8/29/2012 2:27:49 PM

English

4 Play

Basic play operations

Function Action

To stop play Press .

To pause or

resume play

Press .

To skip to a track Press / .

To search during

play

Press and hold /

, then release to resume

normal play.

To select an album

(for MP3/WMA)

Press / .

To navigate the

iPod/iPhone menu

Press MENU, then press

/ to select, and

press to conrm.

To select a track

directly

Press the numeric

buttons.

Play disc

1 Press CD to select the disk source.

2 Press .

» The disc tray opens.

3 Insert a disc with the printed side facing up,

then press to close the disc tray.

» [Read] (read) blinks for a moment,

then play starts automatically.

Play from iPod/iPhone

You can enjoy audio from iPod/iPhone through

this Hi-Fi system.

Compatible iPod/iPhone

The Hi-Fi system supports these iPod and

iPhone models:

Made for.

• iPod touch (1st, 2nd, 3rd, and 4th

generation)

• iPod classic

• iPod with video

• iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th

generation)

• iPod with color display

• iPod mini

• iPhone 4

• iPhone 3GS

• iPhone 3G

• iPhone

Listen to audio from iPod/iPhone

1 Place the iPod/iPhone in the dock.

2 Press iPhone/iPod to select the iPod/

iPhone source.

3 Play audio on the iPod/iPhone.

To remove the iPod/iPhone:

Pull the iPod/iPhone out of the dock.

FWM400D_37_UM_V1.0.indb 11 8/29/2012 2:27:50 PM

12 EN

Charge the iPod/iPhone

When the system is connected to power, the

docked iPod/iPhone starts charging.

Play from USB

Note

•Make sure that the USB device contains playable audio

content.

1 Insert the USB device into the socket.

2 Press USB to select the USB source.

» Play starts automatically.

Play audio from an external

device

With this Hi-Fi system, you can play audio from

an external audio device like MP3 player.

1 Connect the supplied MP3 Link cable to

• the MP3 LINK socket.

• the audio output socket of the

external device.

2 Press MP3 LINK repeatedly to select MP3

link mode.

3 Start to play the external device (see the

user manual of this device).

5 Play options

Adjust sound

During play, you can adjust volume and select

the sound effects.

Function Action

To increase or decrease

volume

Press VOL +/-.

To mute or resume

sound

Press and hold MUTE

for two seconds.

To turn instant power

boost on or off

Press MAX.

To turn dynamic bass

enhancement on or off

Press DBB.

To select a preset sound

effect:

FLAT (at);

OPTIMAL (optimal);

JAZZ (jazz);

ROCK (rock);

TECHNO (techno)

Press DSC repeatedly.

Repeat and shufe play

1 Press REPEAT repeatedly to select:

• : play current track repeatedly.

• (for MP3/WMA only): play

current album repeatedly.

• (repeat all): play all tracks

repeatedly.

• : play all tracks randomly.

2 To return to normal play, press REPEAT

repeatedly until [TRK] (track) is displayed.

FWM400D_37_UM_V1.0.indb 12 8/29/2012 2:27:51 PM

English

Program tracks

You can program a maximum of 20 tracks.

1 In CD or USB mode, press to stop

playback, then press PROG to activate

programming mode.

» [PROG] (program) and the preset

number blinks on the display panel.

2 For MP3/WMA tracks, press / to

select an album.

3 Press / to select a track number,

then press PROG to conrm.

4 Repeat steps 2 to 3 to program more

tracks.

5 Press to play the programmed tracks.

» During play, [PROG] (program) is

displayed.

• To erase the program, when playback

is stopped, press .

Display different information

During play, press DISPLAY repeatedly to view

time and different play information.

6 Listen to FM

radio

Tune to FM radio stations

Note

•For better reception, fully extend and adjust the

position of FM antenna.

1 Press TUNER to select FM tuner source.

2 Press and hold / for 2 seconds.

» The Hi-Fi system tunes to a station

with strong reception automatically.

3 Repeat step 2 to tune to more stations.

To tune to a station manually:

1 Press / repeatedly until you nd

optimal reception.

Store FM radio stations

automatically

Note

•You can store a maximum of 20 preset radio stations.

In FM tuner mode, press and hold PROG for 2

seconds.

» [AUTO](auto) is displayed.

» The system stores all the available FM

stations and broadcasts the rst available

station automatically.

FWM400D_37_UM_V1.0.indb 13 8/29/2012 2:27:51 PM

14 EN

Store FM radio stations

manually

1 Tune to an FM radio station.

2 Press PROG.

» The preset number begins to blink.

3 Press / repeatedly to select a preset

number.

4 Press PROG again to conrm.

5 Repeat Steps 1 to 4 to store other stations.

Note

•To remove a pre-stored station, store another station

in its place.

Select a preset radio station

In tuner mode, press / repeatedly to select

a preset radio station.

7 Other features

Set alarm timer

This Hi-Fi system can be used as an alarm clock.

For alarm source, you can select disc, tuner, USB

or iPod/iPhone.

Note

•Make sure that you have set the clock correctly.

1 In standby mode, press and hold TIMER

until [SET TIMER] (set timer) appears.

» [SELECT SOURCE] (select source)

scrolls on the display.

2 Press source selection keys to select an

alarm source: DISC, TUNER, USB or

iPhone/iPod.

3 Press TIMER to conrm.

» The hour digits blink.

4 Press / to set the hour.

5 Press TIMER to conrm.

» The minute digits blink.

6 Repeat steps 4-5 to set the minute.

To activate or deactivate the alarm timer:

In standby mode, press TIMER repeatedly.

» The alarm icon appears if the alarm timer

is activated.

Note

•When alarm sounds, you can adjust volume by pressing

VOL +/-.

•If Disc/USB/iPod/iPhone is selected as alarm source,

while no disc is inserted or no USB/iPod/iPhone

connected, the system switches to tuner source instead.

FWM400D_37_UM_V1.0.indb 14 8/29/2012 2:27:52 PM

English

Set sleep timer

This Hi-Fi system can switch to standby mode

automatically after a preset time period.

Press SLEEP repeatedly to select a preset

period (in minutes).

» When sleep timer is activated, appears.

To deactivate sleep timer, press SLEEP

repeatedly until [SLP OFF] (sleep off) is

displayed.

» disappears.

8 Product

information

Note

•Product information is subject to change without prior

notice.

Specications

Amplier

Max Output Power 240 W

Frequency Response 63 - 16000 Hz, ±3 dB

Signal to Noise Ratio >55 dB

Disc

Laser Type Semiconductor

Disc Diameter 12cm/8cm

Support Disc CD-DA, CD-R, CD-RW,

MP3-CD, WMA-CD

Audio DAC 24Bits / 44.1kHz

Total Harmonic

Distortion

<1%

Frequency Response 63Hz - 16kHz

S/N Ratio >65dBA

Tuner

Tuning Range 87.5 - 108 MHz

Tuning grid 100 KHz

Sensitivity

- Mono, 26dB S/N Ratio

- Stereo, 46dB S/N Ratio

<22 dBu

<45 dBu

Total Harmonic Distortion <3%

Signal to Noise Ratio >45 dB

FWM400D_37_UM_V1.0.indb 15 8/29/2012 2:27:52 PM

16 EN

Speakers

Speaker Impedance 4ohm

General information

AC power 120 V~, 60 Hz

Operation power

consumption

55 W

Standby power

consumption

<1 W

Eco Standby power

consumption

<0.5 W

USB direct Version 2.0/1.1

Dimensions

- Main Unit (W x H x D)

- Speaker Box

(W x H x D)

220 x 312 x 270 mm

229 x 359 x 269 mm

Weight

- Main Unit

- Speaker Box

3.6 kg

2 x 3.7 kg

USB playability information

Compatible USB devices:

• USB ash memory (USB 2.0 or USB1.1)

• USB ash players (USB 2.0 or USB1.1)

• memory cards (requires an additional card

reader to work with this unit)

Supported formats:

• USB or memory le format FAT16, FAT32

(sector size: 512 bytes)

• MP3 bit rate (data rate): 32-320 Kbps and

variable bit rate

• WMA v9 or earlier

• Directory nesting up to a maximum of 8

levels

• Number of albums/ folders: maximum 999

• Number of tracks/titles: maximum 999

• ID3 tag v2.0 or later

• File name in Unicode UTF8 (maximum

length: 128 bytes)

Unsupported formats:

• Empty albums: an empty album is an album

that does not contain MP3/WMA les, and

will not be shown in the display.

• Unsupported le formats are skipped. For

example, Word documents (.doc) or MP3

les with extension .dlf are ignored and

not played.

• AAC, WAV, PCM audio les

• DRM protected WMA les (.wav, .m4a,

.m4p, .mp4, .aac)

• WMA les in Lossless format

Supported MP3 disc formats

• ISO9660, Joliet

• Maximum title number: 511 (depending on

le name length)

• Maximum album number: 511

• Supported sampling frequencies: 32 kHz,

44.1kHz, 48 kHz

• Supported Bit-rates: 32~320 (kbps),

variable bit rates

• ID3 tag v2.0 or later

Maintenance

Clean the cabinet

• Use a soft cloth slightly moistened with

a mild detergent solution. Do not use a

solution containing alcohol, spirits, ammonia

or abrasives.

Clean discs

• When a disc becomes dirty, clean it with

a cleaning cloth. Wipe the disc from the

centre out.

FWM400D_37_UM_V1.0.indb 16 8/29/2012 2:27:52 PM

English

• Do not use solvents such as benzene,

thinner, commercially available cleaners,

or antistatic spray intended for analogue

records.

Clean the disc lens

• After prolonged use, dirt or dust may

accumulate at the disc lens. To ensure good

play quality, clean the disc lens with Philips

CD lens cleaner or any commercially

available cleaner. Follow the instructions

supplied with cleaner.

9 Troubleshooting

Warning

•Never remove the casing of this device.

To keep the warranty valid, never try to repair

the system yourself.

If you encounter problems when using this

device, check the following points before

requesting service. If the problem remains

unsolved, go to the Philips Web page

(www.philips.com/support). When you contact

Philips, make sure that the device is nearby

and the model number and serial number are

available.

No power

•Ensure that the AC power plug of the unit

is connected properly.

•Ensure that there is power at the AC

outlet.

•To save power, the system switches off

automatically 15 minutes after track

play reaches the end and no control is

operated.

No sound or poor sound

•Adjust the volume.

•Check that the speakers are connected

correctly.

•Check if the stripped speaker wires are

clamped.

Left and right sound outputs reversed

•Check the speaker connections and

location.

No response from the unit

•Disconnect and reconnect the AC power

plug, then turn on the system again.

•As a power-saving feature, the unit

switches off automatically 15 minutes after

track play reaches the end and no control

is operated.

FWM400D_37_UM_V1.0.indb 17 8/29/2012 2:27:52 PM

18 EN

Remote control does not work

•Before you press any function button, rst

select the correct source with the remote

control instead of the main unit.

•Reduce the distance between the remote

control and the unit.

•Insert the battery with its polarities (+/–

signs) aligned as indicated.

•Replace the battery.

•Aim the remote control directly at the

sensor on the front of the unit.

No disc detected

•Insert a disc.

•Check if the disc is inserted upside down.

•Wait until the moisture condensation at

the lens has cleared.

•Replace or clean the disc.

•Use a nalized CD or correct format disc.

Poor radio reception

•Increase the distance between the unit and

your TV or VCR.

•Fully extend the FM antenna.

Timer does not work

•Set the clock correctly.

•Switch on the timer.

Clock/timer setting erased

•Power has been interrupted or the power

plug has been disconnected.

•Reset the clock/timer.

USB device not supported

•The USB device is incompatible with the

unit. Try another one.

10 Notice

Any changes or modications made to this

device that are not expressly approved by

Philips Consumer Lifestyle may void the user’s

authority to operate the equipment.

Notice for the USA

This equipment has been tested and found

to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment generates,

uses, and can radiate radio frequency energy

and, if not installed and used in accordance

with the instruction manual, may cause harmful

interference to radio communications.

However, there is no guarantee that

interference will not occur in a particular

installation. If this equipment does cause harmful

interference to radio or television reception,

which can be determined by turning the

equipment off and on, the user is encouraged

to try to correct the interference by one or

more of the following measures:

• Relocate the receiving antenna.

• Increase the separation between

equipment and receiver.

• Connect the equipment into an outlet on

a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced

radio/TV technician for help.

Warning

•Changes or modications made to this equipment

not expressly approved by Philips many void the FCC

authorization to operate this equipment.

This Class B digital apparatus complies with

Canadian ICES-003.

FWM400D_37_UM_V1.0.indb 18 8/29/2012 2:27:52 PM

English

This device complies with Industry Canada

license-exempt RSS standard(s).

The set complies with the FCC-Rules, Part 15

and with 21 CFR 1040.10. Operation is subject

to the following two conditions:

• This device may not cause harmful

interference, and

• This device must accept any interference

received, including interference that may

cause undesired operation.

Disposal of your old product

and batteries

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

Never dispose of your product with other

household waste. Please inform yourself about

the local rules on the separate collection of

electrical and electronic products and batteries.

The correct disposal of these products helps

prevent potentially negative consequences on

the environment and human health.

Your product contains batteries, which cannot

be disposed of with normal household waste.

Please inform yourself about the local rules on

separate collection of batteries. The correct

disposal of batteries helps prevent potentially

negative consequences on the environment and

human health.

Please visit www.recycle.philips.com for

additional information on a recycling center in

your area.

Environmental information

All unnecessary packaging has been omitted.

We have tried to make the packaging easy to

separate into three materials: cardboard (box),

polystyrene foam (buffer) and polyethylene

(bags, protective foam sheet.)

Your system consists of materials which can

be recycled and reused if disassembled by

a specialized company. Please observe the

local regulations regarding the disposal of

packaging materials, exhausted batteries and old

equipment.

“Made for iPod” and “Made for iPhone”

mean that an electronic accessory has been

designed to connect specically to iPod or

iPhone respectively, and has been certied by

the developer to meet Apple performance

standards. Apple is not responsible for the

operation of this device or its compliance with

safety and regulatory standards. Please note that

the use of this accessory with iPod or iPhone

may affect wireless performance.

iPod and iPhone are trademarks of Apple Inc.,

registered in the U.S. and other countries.

The making of unauthorized copies of copy-

protected material, including computer

programs, les, broadcasts and sound

recordings, may be an infringement of

copyrights and constitute a criminal offence.

This equipment should not be used for such

purposes.

Windows Media and the Windows logo

are trademarks, or registered trademarks of

Microsoft Corporation in the United States

and/or other countries.

This apparatus includes these labels:

FWM400D_37_UM_V1.0.indb 19 8/29/2012 2:27:53 PM

20 EN

Class II equipment symbol

This symbol indicates that the apparatus has a

double insulation system.

Note

•The type plate is located on the bottom of the

apparatus.

FWM400D_37_UM_V1.0.indb 20 8/29/2012 2:27:54 PM

English

get the very most from your purchase.

Visit our World Wide Web Site at http://www.philips.com/welcome

Registering your model with PHILIPS makes you eligible for all of the valuable benets listed below,so don't miss out.

*Product Safety Notication *Additional Benefits

By registering your product, you'll receive notication - directly

from the manufacturer.

Registering your product guarantees that you'll receive all of

the privileges to which you’re entitled, including special money-

saving offers.

Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out.

Complete and return your Product Registration Card at once, or register online at www.philips.com/welcome to

ensure:

Return your Product Registration Card or register online at

www.philips.com/welcome today to get the very most from your purchase.

Visit our World Wide Web Site at http://www.philips.com/welcome

Congratulations on your purchase,

and welcome to the “family!”

Dear PHILIPS product owner:

Thank you for your confidence in PHILIPS.You’ve selected one of

the best-built, best-backed products available today. We’ll do every-

thing in our power to keep you happy with your purchase for many

years to come.

As a member of the PHILIPS “family,” you’re entitled to protection

by one of the most comprehensive warranties and outstanding

service networks in the industry. What’s more, your purchase guar-

antees you’ll receive all the information and special offers for which

you qualify, plus easy access to accessories from our convenient

home shopping network.

Most importantly, you can count on our uncompromising commit-

ment to your total satisfaction.

All of this is our way of saying welcome - and thanks for investing

in a PHILIPS product.

P.S. To get the most from your PHILIPS purchase,be

sure to complete and return your Product Registration

Card at once,or register online at:

www.philips.com/welcome

For Customer Use

Enter below the Serial No.which is locat-

ed on the rear of the cabinet. Retain this

information for future reference.

Model No.__________________________

Serial No. ________________________

Know these

safetysymbols

This “bolt of lightning” indicates unin-

sulated material within your unit may

cause an electrical shock. For the safety of

everyone in your household, please do not

remove product covering.

The “exclamation point” calls atten-

tion to features for which you should

read the enclosed literature closely to pre-

vent operating and maintenance problems.

WARNING: To reduce the risk of fire or

electric shock, this apparatus should not be

exposed to rain or moisture and objects

filled with liquids, such as vases, should not

be placed on this apparatus.

CAUTION: To prevent electric shock,

match wide blade of plug to wide slot, fully

insert.

ATTENTION:Pour éviter les choc élec-

triques, introduire la lame la plus large de la

fiche dans la borne correspondante de la

prise et pousser jusqu’au fond.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

*Proof of

Purchase

Returning the enclosed card guarantees

that your date of purchase will be on file,

so no additional paperwork will be

required from you to obtain warranty

service.

*Product Safety

Notification

By registering your product, you'll receive

notification - directly from the manufac-

turer - in the rare case of a product

recall or safety defect.

*Additional Benefits

Registering your product guarantees that

you'll receive all of the privileges to

which you're entitled, including special

money-saving offers.

Congratulations on your purchase,

and welcome to the “family!”

Dear PHILIPS product owner:

Thank you for your condence in PHILIPS.You’ve selected one of

the best-built, best-backed products available today.We’ll do every-

thing in our power to keep you happy with your purchase for many

years to come.

As a member of the PHILIPS “family,” you’re entitled to protection

by one of the most comprehensive warranties in the industry.

What’s more, your purchase guar antees you’ll receive all the

information and special offers for which you qualify, plus easy access

to accessories from our convenient home shopping network.

Most importantly, you can count on our uncompromising commit-

ment to your total satisfaction.

All of this is our way of saying welcome - and thanks for investing

in a PHILIPS product.

P.S. To get the most from your PHILIPS purchase, be

sure to register online at:

www.philips.com/welcome

FWM400D_37_UM_V1.0.indb 21 8/29/2012 2:27:54 PM

PHILIPS LIMITED WARRANTY

ONE (1) YEAR

WARRANTY COVERAGE:

PHILIPS warranty obligation is limited to the terms set forth

below.

WHO IS COVERED:

Philips warrants the product to the original purchaser or the per-

son receiving the product as a gift against defects in materials and

workmanship as based on the date of original purchase

(“Warranty Period”) from an Authorized Dealer. The original

sales receipt showing the product name and the purchase date

from an authorized retailer is considered such proof.

WHAT IS COVERED:

The Philips warranty covers new products if a defect in material

or workmanship occurs and a valid claim is received by Philips

within the Warranty Period. At its option, Philips will either (1)

repair the product at no charge, using new or refurbished

replacement parts, or (2) exchange the product with a product

that is new or which has been manufactured from new, or ser-

viceable used parts and is at least functionally equivalent or most

comparable to the original product in Philips current inventory,

or (3) refund the original purchase price of the product.

Philips warrants replacement products or parts provided under

this warranty against defects in materials and workmanship from

the date of the replacement or repair for ninety (90) days or for

the remaining portion of the original product’s warranty,

whichever provides longer coverage for you. When a product or

part is exchanged, any replacement item becomes your property

and the replaced item becomes Philips’ property. When a refund

is given, your product becomes Philips’ property.

Note: Any product sold and identified as refurbished or

renewed carries a ninety (90) day limited warranty.

Replacement product can only be sent if all warranty

requirements are met. Failure to follow all requirements

can result in delay.

WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-

TATIONS:

This Limited Warranty applies only to the new products manu-

factured by or for Philips that can be identified by the trademark,

trade name, or logo affixed to it. This Limited Warranty does not

apply to any non-Philips hardware product or any software, even

if packaged or sold with the product. Non-Philips manufacturers,

suppliers, or publishers may provide a separate warranty for their

own products packaged with the bundled product.

Philips is not liable for any damage to or loss of any programs,

data, or other information stored on any media contained within

the product, or any non-Philips product or part not covered by

this warranty. Recovery or reinstallation of programs, data or

other information is not covered under this Limited Warranty.

This warranty does not apply (a) to damage caused by accident,

abuse, misuse, neglect, misapplication, or non-Philips product, (b)

to damage caused by service performed by anyone other than

Philips or Philips Authorized Service Location, (c) to a product or

a part that has been modified without the written permission of

Philips, or (d) if any Philips serial number has been removed or

defaced, or (e) product, accessories or consumables sold “AS IS”

without warranty of any kind by including refurbished Philips

product sold “AS IS” by some retailers.

This Limited Warranty does not cover:

•Shipping charges to return defective product to Philips.

•Labor charges for installation or setup of the product, adjust-

ment of customer controls on the product, and installation or

repair of antenna/signal source systems outside of the product.

•Product repair and/or part replacement because of improper

installation or maintenance, connections to improper voltage

supply, power line surge, lightning damage, retained images or

screen markings resulting from viewing fixed stationary con-

tent for extended periods, product cosmetic appearance items

due to normal wear and tear, unauthorized repair or other

cause not within the control of Philips.

•Damage or claims for products not being available for use, or

for lost data or lost software.

•Damage from mishandled shipments or transit accidents when

returning product to Philips.

•A product that requires modification or adaptation to enable

it to operate in any country other than the country for which

it was designed, manufactured, approved and/or authorized, or

repair of products damaged by these modifications.

•A product used for commercial or institutional purposes

(including but not limited to rental purposes).

•Product lost in shipment and no signature verification receipt

can be provided.

•Failure to operate per Owner’s Manual.

TO OBTAIN ASSISTANCE IN THE U.S.A., PUERTO

RICO, OR U.S. VIRGIN ISLANDS…

Contact Philips Customer Care Center at:

1-888-PHILIPS (1-888-744-5477)

TO OBTAIN ASSISTANCE IN CANADA…

1-800-661-6162 (French Speaking)

1-888-PHILIPS (1-888-744-5477) - (English or Spanish

Speaking)

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS

WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-

SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-

TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF

ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-

UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE

LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT

IS LIMITED IN DURATION TO THE DURATION OF THIS

WARRANTY.

Some states do not allow the exclusions or limitation of inciden-

tal or consequential damages, or allow limitations on how long an

implied warranty lasts, so the above limitations or exclusions may

not apply to you.

This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.

3140 035 50201

Philips, P.O. Box 10313 Stamford, CT 06904

FWM400D_37_UM_V1.0.indb 22 8/29/2012 2:27:55 PM

Specifications are subject to change without notice

FWM400D_37_UM_V1.0

Philips Consumer Lifestyle

A division of Philips Electronics North America Corporation

P.O. Box 10313

Stamford, CT 06904

Phone: 1-888-PHILIPS (744-5477)

Meet Philips at the Internet

http://www.philips.com/welcome

FWM400D_37_UM_V1.0.indb 64 8/29/2012 2:28:22 PM

Table of Contents

Philips FWM400D/37 User Manual

Related Manuals