Philips MCM233/79 User Manual
Displayed below is the user manual for MCM233/79 by Philips which is a product in the Home Audio Systems category. This manual has pages.
Related Manuals
Register your product and get support at
www.philips.com/welcome
EN User manual
MCM233
3
English
EN
7 Other features 15
Set the alarm timer 15
Set the sleep timer 15
Play from an external device 15
8 Product information 16
6SHFLÀFDWLRQV 6
USB playability information 16
Supported MP3 disc formats 17
Maintenance 17
9 Troubleshooting 18
Content
1 Important 4
Safety 4
Notice 5
2 Your Micro Hi-Fi System 6
Introduction 6
What’s in the box 6
Overview of the main unit 7
Overview of the remote control 9
3 Get started 10
Placement 10
Prepare the remote control 10
Connect power 10
Auto install radio stations 11
Set clock 11
Turn on 11
4 Play 12
Play a disc 12
Play from USB 12
5 Listen to radio 12
Tune to a radio station 12
Program radio stations automatically 12
Program radio stations manually 12
Select a preset radio station 13
6 Play options 13
Pause/resume play 13
Skip to a track 13
Search within a track 13
6HOHFWUHSHDWVKXIÁHSOD\RSWLRQV 3
Program tracks 14
Display time 14
Adjust volume level 14
Mute sound 14
Select a preset sound effect 14
Enhance bass 14
4
lUnplug this apparatus during lightning
storms or when unused for long periods
of time.
m 5HIHUDOOVHUYLFLQJWRTXDOLÀHGVHUYLFH
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
nBattery usage CAUTION – To prevent
battery leakage which may result in
bodily injury, property damage, or
damage to the unit:
Install all batteries correctly, + and -
as marked on the unit.
Do not mix batteries (old and new
or carbon and alkaline, etc.).
Remove batteries when the unit is
not used for a long time.
oApparatus shall not be exposed to
dripping or splashing.
pDo not place any sources of danger on
WKHDSSDUDWXVHJOLTXLGÀOOHGREMHFWV
lighted candles).
qWhere the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain
readily operable.
Warning
Never remove the casing of this apparatus.
Never lubricate any part of this apparatus.
Never place this apparatus on other electrical
equipment.
Keep this apparatus away from direct sunlight,
QDNHGÁDPHVRUKHDW
Never look into the laser beam inside this
apparatus.
Ensure that you always have easy access to the
power cord, plug or adaptor to disconnect this
apparatus from the power.
1 Important
Safety
aRead these instructions.
bKeep these instructions.
cHeed all warnings.
dFollow all instructions.
eDo not use this apparatus near water.
fClean only with dry cloth.
gDo not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
hDo not install near any heat sources
such as radiators, heat registers, stoves,
RURWKHUDSSDUDWXVLQFOXGLQJDPSOLÀHUV
that produce heat.
iProtect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
jOnly use attachments/accessories
VSHFLÀHGE\WKHPDQXIDFWXUHU
kUse only with the cart, stand, tripod,
EUDFNHWRUWDEOHVSHFLÀHGE\WKH
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
EN
5
Notice
$Q\FKDQJHVRUPRGLÀFDWLRQVPDGHWRWKLV
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment
and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the environmental
and human health.
Caution
Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Hearing safety
Listen at a moderate volume.
Using headphones at a high volume can
impair your hearing. This product can
produce sounds in decibel ranges that
may cause hearing loss for a normal
person, even for exposure less than a
minute. The higher decibel ranges are
offered for those that may have already
experienced some hearing loss.
Sound can be deceiving. Over time your
hearing ‘comfort level’ adapts to higher
volumes of sound. So after prolonged
listening, what sounds ‘normal’ can
actually be loud and harmful to your
hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
Set your volume control at a low setting.
Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
Prolonged exposure to sound, even
at normally ‘safe’ levels, can also cause
hearing loss.
Be sure to use your equipment
reasonably and take appropriate breaks.
Listen at reasonable volumes for
reasonable periods of time.
Be careful not to adjust the volume as
your hearing adapts.
Do not turn up the volume so high that
you can’t hear what’s around you.
You should use caution or temporarily
discontinue use in potentially hazardous
situations. Do not use headphones while
operating a motorized vehicle, cycling,
VNDWHERDUGLQJHWFLWPD\FUHDWHDWUDIÀF
hazard and is illegal in many areas.
English
EN
6
2 Your Micro Hi-
Fi System
Congratulations on your purchase, and
ZHOFRPHWR3KLOLSV7RIXOO\EHQHÀWIURPWKH
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this unit, you can enjoy audio from discs,
USB devices, other external devices, or listen to
radio stations.
The unit offers Digital Sound Control (DSC) and
Dynamic Bass Boost (DBB) to enrich sound.
The unit supports the following media formats:
What’s in the box
Check and identify the contents of your package:
Main unit
Remote control
Power adaptor
1 x MP3 link cable
Mounting kit (2 dowels and 2 screws)
Quick start guide
User manual
Wall mounting instructions
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
This apparatus includes these labels:
Class II equipment symbol
This symbol indicates that the apparatus has a
double insulation system.
EN
7
dDisplay panel
Show current status.
Overview of the main unit
a
Turn on the unit, or switch to
standby mode, or switch to Eco
Power standby.
b
Open/close the disc compartment.
cDisc compartment
a b c d
English
EN
8
iVOLUME + / -
Adjust volume.
j
Jack for the headphone.
k
Jack for a USB mass storage device.
lMP3 LINK
Audio input jack (3.5mm) for an
external audio device.
eSOURCE
Select a source: CD, FM tuner, USB,
or MP3 link.
f/
Skip to the previous/next track.
Search within a track.
Tune to a radio station.
Adjust hour/minute digits.
Select 12 hour or 24 hour format.
g
Start or pause play.
h
Stop play or erase a program.
l k j
e g hf i
EN
9
cCD
Select disc source.
d/
Skip to the previous/next album.
/
Skip to the previous/next track.
Search within a track.
Tune to a radio station.
Select 12 hour or 24 hour format.
Start or pause play.
eUSB
Select USB device source.
fRDS/DISPLAY (RDS not available)
Select display information.
g
Mute or restore volume.
hVOL +/-
Adjust volume.
iNumeric keypad
Select a track from a disc directly.
jPROG/CLOCK SET
Program tracks.
Program radio stations.
Set the clock.
kSLEEP/TIMER
Set the sleep timer.
Set the alarm timer.
lDSC
Select a preset sound setting.
mDBB
Turn on or off dynamic bass
enhancement.
nREPEAT/SHUFFLE
Play a track or all tracks repeatedly.
Play tracks randomly.
o
Stop play or erase a program.
pMP3 LINK
Select external audio device source.
qTUNER
Select tuner source.
Overview of the remote
control
a
Turn on the unit, or switch to
standby mode, or switch to Eco
Power standby.
bOPEN/CLOSE
Open or close the disc compartment.
PRESET/ALBUM
DISPLAY
PROG/
CLOCK SET
a
b
c
e
f
g
q
p
n
m
o
d
h
i
j
k
l
English
EN
10
Note
If you are not going to use the remote control
for a long time, remove the batteries.
Do not use old and new or different types of
batteries in combination.
Batteries contain chemical substances, so they
should be disposed of properly.
Connect power
Caution
Risk of product damage! Ensure that the power
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
Risk of electric shock! When you unplug the
AC adaptor, always pull the plug from the
socket. Never pull the cord.
Before connecting the AC adaptor, ensure you
have completed all other connections.
3 Get started
Caution
Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
rear of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Placement
<RXFDQSODFHWKHXQLWRQDÁDWVXUIDFHRU
mount the unit on a wall.
Mount on a wall
To wall mount the unit, see the included
separate sheet of wall mounting instructions.
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from
KHDWVXQVKLQHRUÀUH1HYHUGLVFDUGEDWWHULHV
LQÀUH
To insert the remote control battery:
1Open the battery compartment.
2Insert 2 AAA batteries (not supplied)
with correct polarity (+/-) as indicated.
3Close the battery compartment.
EN
11
6Press / to set the minute.
7Press PROG/CLOCK SETWRFRQÀUPWKH
clock setting.
Turn on
1Press .
The unit switches to the last selected »
source.
Switch to standby
1Press again to switch the unit to
standby mode.
The clock (if set) appears on the »
display panel.
To switch the unit to Eco Power Standby
mode:
1In the standby mode, press and hold for
more than 2 seconds.
The backlight on the display panel »
turns off.
Tip
The unit switches to Eco Power Standby mode
after 15 minutes in standby mode.
1Connect the power adaptor to:
the DC IN jack on the main unit.
the wall outlet.
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1Connect the unit to the power supply.
[»AUTO INSTALL PRESS -- PLAY
KEY](auto install press -- play key) is
displayed.
2Press on the main unit to start
installation.
The unit automatically stores radio »
VWDWLRQVZLWKVXIÀFLHQWVLJQDOVWUHQJWK
When all the available radio stations »
DUHVWRUHGWKHÀUVWSUHVHWUDGLRVWDWLRQ
is broadcast automatically.
Set clock
Note
You can set the clock in the standby mode
only.
1Press and hold PROG/CLOCK SET to
enter the clock setting mode.
[»SET CLOCK](set clock) scrolls on the
screen.
2Press / repeatedly to select 12 hour
or 24 hour format.
3Press PROG/CLOCK SETWRFRQÀUP
The hour digits are displayed and begin »
to blink.
4Press / to set the hour.
5Press PROG/CLOCK SETWRFRQÀUP
The minute digits are displayed and »
begin to blink.
English
EN
12
5 Listen to radio
Tune to a radio station
1Press TUNER to select FM.
2Press and hold / for more than 2
seconds.
[»SEARCH] (search) is displayed.
The radio tunes to a station with »
strong reception automatically.
3Repeat step 2 to tune to more stations.
To tune to a weak station, press
/UHSHDWHGO\XQWLO\RXÀQG
optimal reception.
Program radio stations
automatically
You can program a maximum of 20 preset
radio stations (FM).
1In the tuner mode, press and hold
PROG/CLOCK SET for more than 2
seconds to activate automatic program
mode.
[»AUTO] (auto) is displayed.
All available stations are programmed »
in the order of waveband reception
strength.
7KHÀUVWSURJUDPPHGUDGLRVWDWLRQLV»
broadcast automatically.
Program radio stations manually
You can program a maximum of 20 preset
radio stations (FM).
1Tune to a radio station.
2Press PROG/CLOCK SET to activate
program mode.
[»PROG] (program) is displayed.
4 Play
Play a disc
1Press CD to select the disc source.
2Press to open the disc compartment.
3Insert a disc with the printed side facing
outward.
4Press to close the disc compartment.
Play starts automatically. If not, press »
.
Play from USB
Note
Ensure that the USB device contains playable
audio content.
1Insert the USB device into the socket.
2Press USB to select the USB source.
Play starts automatically. If not, press »
.
To select a folder, press / .
7RVHOHFWDQDXGLRÀOHSUHVV / .
EN
13
6 Play options
Pause/resume play
1During play, press to pause/resume
play.
Skip to a track
For CD:
1Press / to select another track.
To select a track directly, you can
also press a key on the numerical
keypad.
2Press to select an album or a folder.
3Press /WRVHOHFWDWUDFNRUDÀOH
Search within a track
1During play, press and hold / .
2Release to resume normal play.
6HOHFWUHSHDWVKXIÁHSOD\
options
1During play, press REPEAT/SHUFFLE
repeatedly to select a repeat option or
WKHVKXIÁHSOD\PRGH
[ ]: the current track is played
repeatedly.
[ ]: all tracks are played
repeatedly.
[ ]: all tracks in this album are
played repeatedly.
[ ]: all tracks are played randomly.
2To resume normal play, press
REPEAT/SHUFFLE repeatedly until no
option is displayed.
3Press / to allocate a number to this
radio station, then press PROG/CLOCK
SETWRFRQÀUP
4Repeat the above steps to program other
stations.
Tip
To overwrite a programmed station, store
another station in its place.
Select a preset radio station
1In tuner mode, press / to select a
preset number.
You can also press the numeric buttons
to select a preset number directly.
Tip
Position the antenna as far as possible from
TV, VCR or other radiation source.
For optimal reception, fully extend and adjust
the position of the antenna.
English
EN
14
Select a preset sound effect
1During play, press DSC repeatedly to
select:
[ POP] (pop)
[ JAZZ] (jazz)
[ ROCK] (rock)
[ CLASSIC] (classic)
[ FLAT@ÁDW
Enhance bass
1During play, press DBB to turn on or off
dynamic bass enhancement.
If DBB is activated, [DBB] is displayed.»
Program tracks
Note
You can program tracks only when the play
stops.
You can program a maximum of 40 tracks.
1Press PROG/CLOCK SET to activate the
program mode.
[»PROG] (program) is displayed.
2For MP3/WMA tracks, press / to
select an album.
3Press / to select a track, then press
PROG/CLOCK SETWRFRQÀUP
4Repeat steps 2 to 3 to program more
tracks.
5Press to play the programmed tracks.
During play, [»PROG] (program) is
displayed.
To erase the program, in the stop
position, press .
Display time
1Press DISPLAY to display time.
Tip
In Eco Standby mode, time is displayed for 90
seconds.
Adjust volume level
1During play, press VOL +/- to increase/
decrease the volume level.
Mute sound
1During play, press to mute/unmute
sound.
EN
15
2Press SLEEP/TIMER repeatedly until
[OFF] (off) is displayed.
When sleep timer is deactivated, »
disappears on the display.
Play from an external device
You can also listen to an external audio device
through this unit.
1Press MP3 LINK to select the MP3 link
source.
2Connect the supplied MP3 link cable to:
the MP3 LINK jack (3.5mm) on the
unit.
the headphone jack on an external
device.
3Start to play the device (see the device
user manual).
7 Other features
Set the alarm timer
This unit can be used as an alarm clock. The
disc/radio/USB is activated to play at a preset
time.
Note
Ensure that you have set the clock correctly.
1Press to switch to standby mode.
2Press and hold SLEEP/TIMER for more
than two seconds.
A prompt to select the source is »
displayed.
3Press CD,TUNER,USB to select a
source.
4Press SLEEP/TIMERWRFRQÀUP
The clock digits are displayed.»
The hour digits begin to blink.»
5Press / to set the hour.
6Press SLEEP/TIMERWRFRQÀUP
The minute digits begin to blink.»
7Press / to set the minute.
The timer is set and activated.»
» is displayed.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1When the unit is turned on, press
SLEEP/TIMER repeatedly to select a set
period of time (in minutes).
When sleep timer is activated, » is
displayed.
English
EN
16
Speakers
Speaker impedance 2 x 10 W, 8
General information
AC power 100-240V~,
50/60HZ
Operation Power
Consumption
15 W
Standby Power Consumption 1 W
Eco Power Standby Power
Consumption
0.8 W
USB Direct Version 2.0/1.1
Dimensions
- Main Unit (W x H x D)
565 x 245 x
104 mm
Weight
- Main Unit
2.7 kg
USB playability information
Compatible USB devices:
86%ÁDVKPHPRU\86%RU86%
86%ÁDVKSOD\HUV86%RU86%
memory cards (requires an additional
card reader to work with this unit)
Supported formats:
86%RUPHPRU\ÀOHIRUPDW)$7
FAT16, FAT32 (sector size: 512 bytes)
MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
WMA v9 or earlier
Directory nesting up to a maximum of 8
levels
Number of albums/ folders: maximum 99
Number of tracks/titles: maximum 999
ID3 tag v2.0 to v2.3
File name in Unicode UTF8 (maximum
length: 128 bytes)
Unsupported formats:
Empty albums: an empty album is an
album that does not contain MP3/WMA
ÀOHVDQGLVQRWEHVKRZQLQWKHGLVSOD\
8 Product
information
Note
Product information is subject to change
without prior notice.
6SHFLÀFDWLRQV
$PSOLÀHU
Total output power 2 x 10 W RMS
Frequency
response
80 Hz - 16 kHz, ± 3 dB
Signal to noise ratio > 60 dB
MP3 link input 0.5 V RMS 20 k
Disc
Laser type Semiconductor
Disc diameter 12 cm /8 cm
Support disc CD-DA, CD-R, CD-RW,
MP3-CD, WMA-CD
Audio DAC 24 Bits / 44.1 kHz
Total harmonic
distortion
< 1.5%
Frequency
response
60 Hz -16 kHz (44.1 kHz)
Signal to noise ratio > 55 dBA
Tuner
Tuning range FM: 87.5 - 108 MHz
Tuning grid 50 KHz
Number of presets 20
EN
17
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
Clean the disc lens
After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure
good play quality, clean the disc lens
with Philips CD lens cleaner or any
commercially available cleaner. Follow the
instructions supplied with cleaner.
8QVXSSRUWHGÀOHIRUPDWVDUHVNLSSHG)RU
example, Word documents (.doc) or MP3
ÀOHVZLWKH[WHQVLRQGOIDUHLJQRUHGDQG
not played.
$$&:$93&0DXGLRÀOHV
'50SURWHFWHG:0$ÀOHVZDYPD
.m4p, .mp4, .aac)
:0$ÀOHVLQ/RVVOHVVIRUPDWDQGELWUDWH
higher than 320 kbps
Supported MP3 disc formats
ISO9660, Joliet
Maximum title number: 999 (depending
RQÀOHQDPHOHQJWK
Maximum album number: 99
Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
Supported Bit-rates: 32-320 (kbps),
variable bit rates
ID3 tag v2.0 to v2.3
Directory nesting up to a maximum of 8
levels
Maintenance
Clean the cabinet
Use a soft cloth slightly moistened with
a mild detergent solution. Do not use
a solution containing alcohol, spirits,
ammonia or abrasives.
Clean discs
When a disc becomes dirty, clean it with
a cleaning cloth. Wipe the disc from the
centre out.
English
EN
18
Insert the battery with its polarities (+/–
signs) aligned as indicated.
Replace the battery.
Aim the remote control directly at the
sensor on the front of the unit.
&DQQRWGLVSOD\VRPHÀOHVLQ86%GHYLFH
7KHQXPEHURIIROGHUVRUÀOHVLQWKH86%
device has exceeded a certain limit. This
phenomenon is not a malfunction.
7KHIRUPDWVRIWKHVHÀOHVDUHQRW
supported.
USB device not supported
The USB device is incompatible with the
unit. Try another one.
Poor radio reception
Increase the distance between the unit
and your TV or VCR.
Fully extend and adjust the FM antenna.
Clock/timer setting erased
Power has been interrupted or the power
cord has been disconnected.
Reset the clock/timer.
Timer does not work
Set the clock correctly.
Switch on the timer.
9 Troubleshooting
Warning
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
Ensure that the AC power plug of the
unit is connected properly.
Ensure that there is power at the AC
outlet.
To save power, the unit switches to Eco
Standby mode automatically after 15
minutes in standby mode.
No sound
Adjust the volume.
No response from the unit
Disconnect and reconnect the AC power
plug, then turn on the unit again.
No disc detected
Insert a disc.
Check if the disc is inserted with the print
side facing inward.
Wait until the moisture condensation at
the lens has cleared.
Replace or clean the disc.
8VHDÀQDOL]HG&'RUFRUUHFWIRUPDWGLVF
Remote control does not work
%HIRUHSUHVVLQJDQ\IXQFWLRQEXWWRQÀUVW
select the correct source with the remote
control instead of the main unit.
Reduce the distance between the remote
control and the unit.
EN
Version 1.3: 1st July 2009
PHILIPS CONSUMER ELECTRONICS
WARRANTY POLICY FOR AUSTRALIA
Effective 1st July 2009
Philips provides its Consumer Electronics products with a 1 Year Manufacturers Warranty.
The benefits given to the purchaser by this warranty are in addition to all other rights and remedies,
which the purchaser has in respect of the product under the Trade Practices Act or other Commonwealth
or State Law.
The conditions contained in this warranty replace and override the provision of the Philips World-Wide Guarantee
for products purchased in Australia and used in Australia.
Please record the following information for your records and keep in a safe place.
It is essential that you retain your original purchase receipt to make a warranty claim.
Model number : ………………………………………………………
Serial number : ………………………………………………………
Date of purchase : ………………………………………………………
Retailer : ………………………………………………………
If you require assistance with the operation of the product, its features or specifications, you may call the
Philips Technology Care Centre on 1300 363 391 where support is provided by our trained staff.
If the product fails within 12 months from the date of purchase, please return the faulty product to the place of
purchase.
Conditions of Warranty
a. All claims for warranty can only be made at the place of purchase and a copy of the purchase receipt is required
for any warranty claim.
b. The warranty period is valid from the original date of purchase of the product.
c. This warranty extends only to defects in material or workmanship occurring under normal use of the product
when operated in accordance with the instructions.
d. Philips may, at its discretion choose to repair rather than replace this product.
e. If a replacement product is supplied, it is warranted for the remainder of the warranty period, from the original
date of purchase.
f. This Manufacturers Warranty is limited to 3 months for products used in commercial applications.
g. Product accessories are covered by the same warranty period. If an accessory is faulty, please contact the Philips
Technology Care Centre on 1300 363 391.
h. This Manufacturers Warranty is neither transferable nor valid in countries other than Australia.
This Warranty does not cover:-
a. Service costs arising from failure to correctly adjust the controls of the product or to observe the instructions,
or inspections that reveal that the product is in normal working order.
b. Product failures caused by misuse, neglect, accidental breakage, transit damage, un-authorised repairs or
modification by un-authorised persons, external fires, lightning strikes, floods, vermin infestation or liquid spillage.
c. Reception problems, replacement of worn or used batteries or other consumables.
d. Second hand products or refurbished products.
e. Products failure, caused by other products.
21
4
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
MCM233_79_UM_V1.0