Register your product and get support at
EN User manual
ES Manual del usuario
FR Mode d’emploi
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the Radio Interference Regulations of the Canadian
Department of Communications.This Class B digital apparatus complies with Canadian
Cet appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de Classe B prescrites dans le Règlement sur le
Brouillage Radioélectrique édicté par le Ministère des Communications du Canada. Cet
appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
The set complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
L’appareil est conforme à la réglementation FCC, section 15, et à la norme
21 CFR 1040.10. Son utilisation est soumise à deux conditions :
1. L’appareil ne doit pas provoquer d’interférences nuisibles, et
2. L’appareil doit supporter les interférences reçues, y compris les interférences
empêchant son fonctionnement correct.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
1 Important 6
Important safety instructions 6
2 Your portable DVD player 9
What’s in the box 9
Overview of the main unit 9
3 Get started 11
Charge the battery 11
Connect additional equipment 12
4 Use your player 13
Turn on 13
Select OSD language 13
Play discs 13
Play options 14
Adjust brightness of screen backlight 14
5 Adjust settings 15
6 Product information 16
7 Troubleshooting 17
Important safety instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings. Install in accordance with the
h Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including ampliﬁ ers) that produce heat.
i Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not ﬁ t into your outlet, consult an
electrician for replacement of the obsolete outlet.
j Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
k Only use attachments/accessories speciﬁ ed by the manufacturer.
l Use only with the cart, stand, tripod, bracket, or table speciﬁ ed by the
manufacturer or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
m Unplug this apparatus during lightning storms or when unused for long periods
n Refer all servicing to qualiﬁ ed service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
o Apparatus shall not be exposed to dripping or splashing.
p Do not place any sources of danger on the apparatus (e.g. liquid ﬁ lled objects,
q This product may contain lead and mercury. Disposal of these materials may
be regulated due to environmental considerations. For disposal or recycling
information, please contact your local authorities or the Electronic Industries
Never remove the casing of this apparatus.
Never lubricate any part of this apparatus.
Never place this apparatus on other electrical equipment.
Keep this apparatus away from direct sunlight, naked ﬂ ames or heat.
Never look into the laser beam inside this apparatus.
Ensure that you always have easy access to the power cord, plug or adaptor to disconnect this
apparatus from the power.
Listen at a moderate volume.
Using headphones at a high volume can impair your hearing. This product can •
produce sounds in decibel ranges that may cause hearing loss for a normal person,
even for exposure less than a minute. The higher decibel ranges are offered for
those that may have already experienced some hearing loss.
Sound can be deceiving. Over time your hearing ‘comfort level’ adapts to higher •
volumes of sound. So after prolonged listening, what sounds ‘normal’ can actually
be loud and harmful to your hearing. To guard against this, set your volume to a
safe level before your hearing adapts and leave it there.
To establish a safe volume level:
Set your volume control at a low setting. •
Slowly increase the sound until you can hear it comfortably and clearly, without •
Listen for reasonable periods of time:
Prolonged exposure to sound, even at normally ‘safe’ levels, can also cause hearing •
Be sure to use your equipment reasonably and take appropriate breaks.•
Be sure to observe the following guidelines when using your headphones.
Listen at reasonable volumes for reasonable periods of time.•
Be careful not to adjust the volume as your hearing adapts.•
Do not turn up the volume so high that you can’t hear what’s around you.•
You should use caution or temporarily discontinue use in potentially hazardous •
situations. Do not use headphones while operating a motorized vehicle, cycling,
skateboarding, etc.; it may create a trafﬁ c hazard and is illegal in many areas.
All unnecessary packaging has been omitted. We have tried to make the packaging
easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and
polyethylene (bags, protective foam sheet.)
Your system consists of materials which can be recycled and reused if disassembled by
a specialized company. Please observe the local regulations regarding the disposal of
packaging materials, exhausted batteries and old equipment.
Any changes or modiﬁ cations made to this device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s authority to operate the equipment.
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
When you see the crossed-out wheel bin symbol attached to a product, it
means the product is covered by the European Directive 2002/96/EC:
Never dispose of your product with other household waste. Please inform
yourself about the local rules on the separate collection of electrical and
electronic products. The correct disposal of your old product helps prevent
potentially negative consequences on the environment and human health.
Your product contains batteries covered by the European Directive 2006/66/
EC, which cannot be disposed of with normal household waste.
When you see the crossed-out wheel bin symbol with the chemical symbol ‘Pb’, it means
that the batteries comply with the requirement set by the directive for lead:
Please inform yourself about the local rules on separate collection of
batteries. The correct disposal of batteries helps prevent potentially negative
consequences on the environment and human health.
Always bring your product to a professional to remove the built-in battery.
The making of unauthorized copies of copy-protected material, including computer
programs, ﬁ les, broadcasts and sound recordings, may be an infringement of copyrights
and constitute a criminal offence. This equipment should not be used for such purposes.
Recording and playback of material might require consent.
See Copyright Act 1956 and The Performer’s Protection
Acts 1958 to 1972.
This apparatus includes this label:
2 Your portable DVD player
Congratulations on your purchase, and welcome to Philips! To fully beneﬁ t from the
support that Philips offers, register your product at www.philips.com/welcome.
Your portable DVD player plays digital video discs that conform to the universal DVD
Video standard. With it, you can play movies with true cinema picture quality and stereo
or multi-channel sound (depending on disc and playback set-up).
You can also select sound track, subtitle languages, and different angle of view (again
depending on DVD disc). Besides, you can restrict the play of discs that are not suitable
You can play the following discs on the DVD player (including CD-R, CD-RW, DVD±R
Discs with JPEG ﬁ les•
What’s in the box
Check and identify the contents of your package:
Portable DVD player•
AC power adaptor, DSA-9W-09 F (DVE) or AY4132 (Philips)•
AV cables •
Quick Start Guide•
Overview of the main unit
Accesses or exits the setup menu.•
Adjusts brightness of the screen backlight.•
Stops disc play.•
Skips to the previous or next title, chapter, or track.•
e, , ,
Navigates through the menus.•
Searches backward/forward at different speeds. •
Conﬁ rms an entry or selection.•
Starts, pauses or resumes disc play.•
Charging indicator/Power indicator•
Turns off the front panel display when the player is connected to TV.•
Accesses options relating to the current activity or selection.•
For DVD, accesses or exits disc menu.•
For VCD, turns on or off PBC (Playback Control) mode.•
For VCD version 2.0 or SVCD with PBC turned on, returns to the menu. •
Opens the disc compartment. •
kPOWER ON /OFF
Turns on/off DVD player.•
Increases or decreases volume.•
Audio/video output jack•
Power supply socket•
3 Get started
Use the controls only as stated in this user manual.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of your player. Find
the model number and serial number of this player at the back or the bottom of your player.
write these numbers here:
Model No. __________________________
Serial No. ___________________________
Charge the battery
Risk of product damage! Ensure that the power supply voltage corresponds to the voltage
printed on the bottom of the player.
Use only the supplied AC adaptor to charge the battery.
The type plate is located on the bottom of the player.
•You can only charge the player when it is in power-off mode.
1 Slide the POWER ON/OFF switch to OFF position.
2 Connect the supplied AC adaptor to the player and to the AC outlet.
The charge indicator turns on. It takes about 4.5 hours to fully charge the
When the battery is fully charged, the charge indicator turns off.
Connect additional equipment
Turn off your player before connecting to any additional equipment.
You can connect the player to a TV or an ampliﬁ er to enjoy DVDs or Karaoke.
Match the color of the AV cables (the AV cable connected to TV is not supplied) with
the jacks: the yellow cable is for the yellow video jack, the red/white cable is for the red/
white audio jacks.
To conserve energy, press
•AV MODE to turn off the front panel display.
4 Use your player
Slide the POWER ON/OFF switch to the ON position.
»PWR indicator turns on.
Select OSD language
You can choose a diffrent language for the on-screen display text.
1 Press SETUP.
The setup menu appears.
2 Select [General Setup Page] > [OSD Language].
3 Press to select an option.
4 Press /OK to conﬁ rm.
5 Press SETUP to exit.
1 Slide OPEN on the player.
2 Insert the disc with label side facing up.
3 Push down to close the disc compartment.
Play starts automatically. If not, press
If a menu appears, select an item, then press • /OK to start play.
To pause, press • /OK. Press again to resume play.
To stop, press • STOP twice.
To select the previous/next item, press • or .
To start search within video/audio, press • or once or more.
1 During play, press OPTION to select some play options.
For audio CDs
For JPEG CDs
2 Follow the on-screen instructions.
Adjust brightness of screen backlight
You can adjusts brightness of the screen backlight to match lighting conditions.
During play, press repeatedly to select an option.
To achieve the longest playtime, select
To achieve the best view, select
5 Adjust settings
To maximize your play experience, use SETUP to ﬁ ne tune your settings.
1 Press SETUP.
The setup menu is displayed.
2 Press to select an option and press /OK to conﬁ rm.
[General Setup Page]
[OSD Language] Select on-screen display language.
[Screen Saver] Activate/deactivate screen saver.
[Resume] Select whether to start play from the point
where it was last stopped.
[Angle Mark] select angle mark display options.
[Display Setup Page]
[Brightness] Adjust screen brightness.
[Contrast] Adjust screen contrast.
[Screen Display] Select display ratio.
[Battery Life Setup Page]
[LCD Backlight] Adjust the default brightness level of screen
[Audio] Select audio language.
[Subtitle] Select subtitle language.
[Disc Menu] Select disc menu language.
[Parental] Select parental level.
[Password] Change password (3308 by default).
[Default] Restore original settings.
3 Press to go back to previous menu level.
4 Press SETUP to exit.
6 Product information
Product information is subject to change without prior notice.
Dimensions 195 x 154 x 38 mm
Weight 0.7 kg
Power supply Input: 100-240V 50/60Hz 0.3A
Output: DC 9V 1A
Power consumption 9 W
Operating temperature range 0-45°C
Laser wavelength 650 nm
Video system NTSC
Frequency response 20Hz-20KHz ± 1dB
Signal/noise ratio 80 dB
Audio distortion + noise -80 (1KHz)
Channel separation 80 dB
Dynamic range 80 dB
Audio out (analog audio) Output level: 2V ± 10%
Load impedance 10 K
Video out Output level: 1Vp - p ± 20%
Load impedance 75
Risk of electric shock. Never remove the casing of the player.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using the player, check the following points before
requesting service. If the problem remains unsolved, register your player and get support
Ensure that both plugs of the mains cord are properly connected.•
Ensure that there is power at the AC outlet.•
Check if the built-in battery is drained.•
Ensure that the AV cable is connected correctly.•
Clean the disc. With a clean, soft, lint-free cloth, wipe the disc outwards from the •
Make sure that the video output format of the disc is compatible with the TV.•
Change the video output format to match your TV or program.•
The LCD is manufactured using high precision technology. You may, however, see •
tiny black points and/or bright points(red, blue, green) that continuously appear
on the LCD. This is a normal result of the manufacturing process and does not
indicate a malfunction.
Cannot play disc
Ensure the disc label is upwards.•
Clean the disc. With a clean, soft, lint-free cloth, wipe the disc outwards from the •
Check if the disc is defective by trying another disc.•
No response to the remote control
Ensure that the path between the remote control and the player is clear from •
From a close distance, point the remote control directly at the player.•
Replace the remote control batteries.•
The function does not work for this disc. Refer to the disc instructions.•
The player feels warm
When the player is in use for a long period of time, its surface will be heated. This •
Philips Consumer Lifestyle
A Division of Philips Electronics North America Corporation
P.O. BOX 671539, Marietta, GA. 30006-0026
Meet Philips at the Internet
Printed in China UM_37_V2.0