Philips PPX3410/EU User Manual
Displayed below is the user manual for PPX3410/EU by Philips which is a product in the Data Projectors category. This manual has pages.
Related Manuals
UK
PPX3407
PPX3410
User Manual
Register your product and get support at
www.philips.com/welcome
2 Philips · PPX3407 · PPX3410
Table of Contents
Overview ................................................... 3
Dear Customer ................................................................... 3
About this User Manual ..................................................... 3
1 General Safety Information................ 4
Setting Up the Device ........................................................ 4
Repairs ................................................................................... 4
Power Supply ....................................................................... 4
2 Overview............................................... 6
Top of the Device ............................................................... 6
Side view ............................................................................... 6
Bottom of the Device ........................................................ 6
Remote Control .................................................................. 7
Overview of the Menu Functions .................................... 8
3 Initial Operation .................................. 9
Setting up the Device ......................................................... 9
Connecting power supply / Charging battery .............. 9
Initial Installation .................................................................. 9
Installing or Changing the Batteries of the Remote Con-
trol ....................................................................................... 10
Using the Remote Control ............................................ 11
4 Connect to the playback device ....... 12
Connecting to Devices with HDMI output ............... 12
Connecting to a Computer (VGA) .............................. 12
Connecting using Audio/Video (CVBS) Adaptor Cable
................................................................................................13
Connecting using Component-Video (YPbPr/YUV)
Cable ................................................................................... 13
Connecting the headphones .......................................... 14
5 Memory card / USB storage medium
............................................................. 15
Inserting a Memory Card ............................................... 15
Connecting USB Storage Medium ................................ 15
6 Media Playback................................... 16
Video Playback .................................................................. 16
Photo Playback ................................................................. 17
Music Playback .................................................................. 18
Managing les .................................................................... 18
7 Settings ............................................... 21
8 Service................................................. 23
Care Instructions for the Battery ................................ 23
Battery deep discharge ................................................... 23
Cleaning .............................................................................. 24
Device overheated ........................................................... 24
Troubleshooting ............................................................... 25
9 Appendix............................................. 26
Technical Data .................................................................. 26
Accessories ........................................................................ 26
3
Overview
Dear Customer
Thank you for purchasing our Pocket Projector.
We hope you enjoy your device and its many functions!
About this User Manual
With the installation guide on the following pages, you
can start using your device quickly and easily. Detailed
descriptions can be found in the following sections of
this user manual.
Read the entire user manual carefully. Follow all safety
instructions in order to ensure proper operation of
your device. The manufacturer accepts no liability if
these instructions are not followed.
Symbols Used
Note
Troubleshooting
This symbol designates tips that will help you
to use your device more effectively and easily.
CAUTION!
Damage to the Device or Loss of Data!
This symbol gives warning of damage to the
device and possible loss of data. These dama-
ges can result from improper handling.
DANGER!
Danger to Persons!
This symbol gives warning of danger to per-
sons. Physical injury or damage can result
from improper handling.
4 Philips · PPX3407 · PPX3410
1 General Safety Information
Do not make any changes or settings that are not
described in this user manual. Physical injury or damage
to the device or loss of data can result from improper
handling. Take note of all warning and safety notes indi-
cated.
Setting Up the Device
The device is exclusively for indoor use. The device
should be placed securely on a stable, at surface. Posi-
tion all cables in such a way that no one will stumble on
them, thus avoiding possible injuries to persons or dam-
age to the device itself.
Do not plug in the device in moist rooms. Never touch
the mains cable or the mains connection with wet
hands.
The device must have sufcient ventilation and may not
be covered. Do not put your device in closed cabinets
or boxes.
Do not place the machine on soft surfaces such as table-
cloths or carpets and do not cover the ventilation slits.
Otherwise the device could overheat or catch re.
Protect the device against direct sunlight, heat, large
temperature uctuations and moisture. Do not place
the device in the vicinity of heaters or air conditioners.
Observe the information on temperature and humidity
in the technical data.
When the device is running for a long period of time,
the surface becomes hot and a warning symbol appears
on the projection. The device switches automatically to
stand-by mode when it gets too hot. After the device
has cooled down, you can continue playback by pressing
any key.
Do not allow liquids to enter into the device. Switch off
the device and disconnect it from the mains supply if liq-
uids or foreign substances end up inside the device.
Have the unit inspected by a technical service depart-
ment.
Always handle the unit with care. Avoid touching the
lens. Never place heavy or sharp objects on the projec-
tor or the power cable.
If the projector gets too hot or emits smoke, shut it
down immediately and unplug the power cable. Have
your device examined by trained professionals at a tech-
nical service location. To prevent the spread of re,
open ames should be kept away from the device.
Under the following conditions, a layer of moisture can
appear inside the device which can lead to malfunctions:
· if the device is moved from a cold to a warm area;
· after a cold room is heated;
· when this device is placed in a damp room.
Proceed as follows to avoid any moisture build-up:
1Seal this device in a plastic bag before moving it to
another room, in order for it to adapt to room con-
ditions.
2Wait one to two hours before you take the device
out of the plastic bag.
The device should not be used in a very dusty environ-
ment. Dust particles and other foreign objects may
damage the unit.
Do not expose the device to extreme vibrations. It may
damage the internal components.
Do not allow children to handle the device without
supervision. The packing materials should be kept out of
the hands of children.
Repairs
Do not make any repairs to the device yourself.
Improper maintenance can result in injuries or damage
to the device. Only have your device repaired by an
authorised service centre.
Do not remove the type label from your device; this
would void the warranty.
Power Supply
Use only the enclosed power adapter (see chapter Appen-
dix / Technical Data). Check whether the mains voltage of
the power supply matches the mains voltage available at
the setup location. This equipment complies with the volt-
age type specied on the unit.
The capacity of the battery diminishes with time. If the
device functions only with the power supply, the battery
is defective. Contact an authorised service centre to
replace the battery.
Do not try to replace the battery yourself. Incorrect
handling of the battery or using the wrong type of bat-
tery can cause damage to the device or cause injury.
The AC main plug of adaptor is used as the power discon-
nect device, the socket-outlet shall be installed near the
equipment and shall be easily accessible.
General Safety Information 5
Switch the device on or off using the power switch
before removing the power supply from the socket.
Turn off the device and remove it from the power sup-
ply before cleaning the surface. Use a soft, lint-free
cloth. Never use liquid, gaseous or easily ammable
cleansers (sprays, abrasives, polishes, alcohol). Do not
allow any moisture to reach the interior of the device.
DANGER!
Risk of explosion with incorrect type of
batteries
Only replace the batteries with the same or
comparable batteries.
There is a risk of explosion if the incor-
rect battery type is used.
DANGER!
High Power LED
This device is equipped with an high power
LED (Light Emitting Diode), which emits very
bright light. Do not look directly into the pro-
jector lens. This could cause eye irritation or
damage.
DANGER!
Danger of Hearing Damage
Do not use the device over a longer time at
high volume—especially when using headpho-
nes. This could lead to the risks of hearing
damage.
6 Philips · PPX3407 · PPX3410
2 Overview
Top of the Device
—Focus wheel for image sharpness.
—One menu step back, one directory level back
/ cancelling a function
—Navigation key / OK key
à—Conrm entry / start, stop video/music playback
or slideshow.
—Navigating / during music playback select pre-
vious, next title when image display is switched off
À/Á—Navigating / during music playback: adjust vol-
ume level / during video playback review, cue
Side view
—On/Off switch
—Battery status monitor
Red: battery is in charging.
Green: battery stops charging.
Red/Green ash: battery capacity is low, or stops charg-
ing because of temperature protection.
—Remote-control signal receiver
Ï—Audio output – headphone connection or con-
nection for external speakers
—Connection for a playback
device with an HDMI/YPbPr/VGA output via an adapter
cable
—Memory card slot (SD/SDHC/SDXC/MMC)
—connection for a computer (data excha-
nge)
—Port for power supply
Bottom of the Device
Tripod socket
Note
Note that the distance to the projection sur-
face must be a minimum of 0.5 meters and a
maximum of 5 meters. If the Pocket Projector
is located outside of this range, it will not be
possible to focus the image. Turn the focus
wheel carefully so as to avoid damaging the
lens.
HDMI/YPbPr/VGA
(1)
(2)
(3)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(1)
(2) Pico Station connector
Mini USB
USB—Connection for a USB storage medium
(CVBS) output via an adapter cable
A/V—Connection for a playback device with an A/V
(3) Pico Station connection socket
Overview 7
Remote Control
—Magnify still. Pan using the navigation keys (
,À/Á)
—One menu step back, one directory level back /
cancelling a function
Direction Buttons
à—Conrms selection
,À/Á—Navigation keys / navigate the menu /
modify settings
—Modify settings / during music playback select
previous, next title
À/Á—During music playback adjust volume level /
during video playback review, cue
Playback keys
—During video playback review
T—Start / stop playback
—During video playback cue
Brightness keys
N O —Decrease / increase the brightness
Volume keys
N—Decrease the volume
—Deactivate sound
O—Increase the volume
—Standby / Activate the device
(1)
(2)
(3)
(4)
8 Philips · PPX3407 · PPX3410
Overview of the Menu
Functions
1After switching on the device the main menu
appears.
2Select the desired menu using the navigation keys
,À/Á.
3Conrm with à.
4By pressing the key several times you will return
to the main menu.
Videos—Selecting les for video playback
Source—Switch to the external video input HDMI,
, or VGA
Pictures—Selecting les for the slideshow
Folder View—Selecting les for Playback. Copy or
Delete Files (Mark the les with Áand conrm
using à).
Music—Selecting music les for playback
Settings—Congure settings for playback and for
the device
Symbols in the Main Menu
The chosen storage appears highlighted in white.
—USB storage medium
—Memory card
—Internal memory
—Charge level of the internal battery The icon will
ash red, when the battery needs to be recharged. If the
power supply is connected, no symbol is displayed.
Initial Operation 9
3 Initial Operation
Setting up the Device
You can position the device so that it lies at on a table
in front of the projection surface; it is not necessary to
tilt it towards the projection surface. The device com-
pensates for the distortion from the slanted projection
(pincushion distortion).
A tripod accessory is available if you want to elevate the
device (Pico Tripod / 253521272).
Connecting power supply /
Charging battery
1Insert the small plug of the power supply into the
socket on the rear side of your device.
2Plug the power supply into the mains.
3During the charging process, the indicator light on
the side of the device will be red. When the battery
is fully charged, it will turn green.
4Charge the built-in battery before using for the rst
time for at least 3 hours. This will prolong the life of
the battery.
Initial Installation
1Switch the device on using the on/off switch on the
side.
2Turn the device towards a suitable projection sur-
face or wall. Note that the distance to the projection
surface must be a minimum of 0.5 meters and a max-
imum of 5 meters. Make sure the projector is in a
secure position.
3Use the focus wheel on the top to adjust the image
sharpness.
4Select the desired menu language using .
5Conrm with à.
CAUTION!
Mains Voltage at the Site of Installation!
Check whether the mains voltage of the
power supply matches the mains voltage
available at the setup location.
Note
The main menu appears instead of
the language selection
The device has already been installed. In
order to change the menu language, pro-
ceed as follows:
1Use the navigation keys to select Set-
tings.
2Conrm with à.
3Select with Language.
4Conrm with à.
5Select the desired language with .
6Conrm with à.
7Exit with .
10 Philips · PPX3407 · PPX3410
Installing or Changing the
Batteries of the Remote
Control
1To access the battery, disengage the locking mecha-
nism ( ) and slide out the battery compartment
().
2Insert the new batteries into the battery compart-
ment with the positive and negative poles as shown
on the back of the remote control. Make sure the
polarities(+ and -) are aligned correctly.
3Push the battery compartment back into the remote
control until the locking mechanism engages.
DANGER!
Risk of explosion with incorrect type of
batteries
Only use the CR 2025 type battery.
There is a risk of explosion if the incor-
rect battery type is used.
Note
Normally the batteries will last for around
one year. If the remote control stops working,
please replace the batteries. If the device is
not used for a long time, take out the batte-
ries. This will prevent leakage and possible
damage to the remote control.
The used batteries should be disposed of
according to the recycling regulations of your
country.
Initial Operation 11
Using the Remote Control
Point the remote control at the remote sensor on the
back of the device. The remote can be used within an
angle of 60 degrees and up to 5 meters from the device.
When using the remote control, no obstacle should be
placed between the remote control and remote sensor.
CAUTION!
rThe improper use of batteries can lead to
overheating, explosion, risk of re and
injury. Leaking batteries can possibly damage
the remote control.
rNever expose the remote control to direct
sunlight.
rAvoid deforming, dismantling or charging
the batteries.
rAvoid exposure to open re and water.
rReplace empty batteries immediately.
rRemove the battery from the remote con-
trol if not in use for long period of time.
12 Philips · PPX3407 · PPX3410
4 Connect to the playback device
Only use the supplied cable or cables that are available
as accessories to connect the projector.
Supplied Cables
Mini-USB to USB Cable
Cables available as Accessories
Component Video Cable ........(PPA 1210 / 253447083)
VGA-Audio Cable ....................(PPA 1250 / 253447070)
iPhone Cable ..............................(PPA 1280 / 253447091)
Connecting to Devices with
HDMI output
Use the HDMI to mini HDMI cable to connect the
projector to a computer or laptop.
1Switch to HDMI in Menu >Source
2Connect the HDMI cable to the projector's mini-
HDMI socket.
3Connect the cable to the HDMI socket of the play-
back device.
Connecting to a Computer
(VGA)
Use the VGA-Audio cable (available as an accessory) to
connect the projector to a computer, laptop, or some
PDAs. The projector supports the following resolutions:
VGA/SVGA/XGA. For best results, set the computer’s
resolution to SVGA (800x600).
1Connect the VGA-Audio cable to the projector's
mini-HDMI socket.
2Connect the VGA plug to the computer's VGA
socket and the audio plug to the computer's audio
output.
3Adjust the computer's resolution to the correct set-
ting and switch the VGA signal to an external moni-
tor. The following resolutions are supported:
4Select Menu >Source and switch to VGA.
Note
Many laptops do not activate the external
video output automatically when you connect
a second display such as a projector. Check
your laptop's manual to nd out how to acti-
vate the external video output.
Resolution Image
refresh rate
VGA 640 x 480 60 Hz
SVGA 800 x 600 60 Hz
XGA 1024 x 768 60 Hz
Note
Screen Resolution
You can obtain the best results with the
800¦×¦600 (60Hz) resolution.
MHL to mini-HDMI cable .......(PPA 1240 / 253520048)
HDMI to mini-HDMI Cable (PPX3410 included)
Pico Station.................................(PPA 7300 / 253529749)
Connect to the playback device 13
Connecting using Audio/
Video (CVBS) Adaptor
Cable
Use the projector's audio/video adaptor cable (A/V
cable) to connect camcorders, DVD players or digital
cameras. The jacks for these devices are yellow (video),
red (audio right) and white (audio left).
1Connect the supplied A/V cable to the projector's
A/V socket.
2Connect the video device's audio/video jacks to the
A/V cable using a conventional composite video
(RCA) cable.
3Select Menu >Source and switch to AV.
Connecting to mobile multimedia devices
Some video devices (e.g.: pocket multimedia players, ...)
require specic connection cables. There are either
supplied with the device or acquired from the manufac-
turer of the multimedia device. Please note that only the
original cables from the device manufacturer may func-
tion.
Connecting using
Component-Video (YPbPr/
YUV) Cable
Please use this type of connection to obtain the highest
possible image quality. This cable is available as an acces-
sory. The device jacks have the colours green (Y), blue
(U/Pb), red (V/Pr) for the video signal and red (audio
right) and white (audio left) for the audio signal.
1Connect the video component cable (accessory) to
the projector's mini-HDMI socket.
2Connect the video device's appropriate colored
sockets to the component video cable of the projec-
tor using a conventional component video (RCA)
cable.
3Select Menu >Source and switch to Component.
Note
Switching to the multimedia device sig-
nal output
See the multimedia device instruction manual
to nd out how to switch the signal output to
this jack.
Note
YCbCr
Note that the YPbPr outlets are labelled
YCbCr on some devices.
Note
Two red phono (RCA) connectors
When connecting, note that there are two
red phono (RCA) connectors on the cable.
One is for the right audio signal and the
other for the V/Pr element of the compo-
nent video signal. If these two connectors
are inserted incorrectly, the projected
image appears green and the audio signal
for the right speaker will not work.
14 Philips · PPX3407 · PPX3410
Connecting to mobile multimedia devices
Some video devices (e.g.: pocket multimedia players, ...)
require specic connection cables. There are either
supplied with the device or acquired from the manufac-
turer of the multimedia device. Please note that only the
original cables from the device manufacturer may func-
tion.
Connecting the headphones
1Before connecting the headphones, turn down the
volume on the device.
2Connect the headphones to the projector's head-
phone slot. The device speakers deactivate automat-
ically when the headphones are connected.
3After connecting the headphones, increase the vol-
ume to a comfortable level.
Note
Switching to the multimedia device sig-
nal output
See the multimedia device instruction manual
to nd out how to switch the signal output to
this jack.
DANGER!
Danger of Hearing Damage
Do not use the device over a longer time at
high volume—especially when using headpho-
nes. This could lead to the risks of hearing
damage. Before connecting the headphones,
turn down the volume on the device. After
connecting the headphones, increase the
volume to a comfortable level.
51muidemegarotsBSU/dracyromeM
5 Memory card / USB storage medium
Inserting a Memory Card
1Insert a memory card with the contacts facing
upwards into the slot at the back of the
device. Your device supports the following memory
cards: SD/SDHC/SDXC/MMC.
2Insert the memory card into the slot until it snaps
into position.
3Press lightly on the memory card to remove it.
4The memory card is ejected.
Connecting USB Storage
Medium
1Connect the USB storage medium directly to the
USB socket on the left side of the device.
DANGER!
Inserting a Memory Card!
Never pull out the memory card while the
device is accessing it. This could cause data
to be damaged or lost.
In order to make sure that the device does
not access the memory card, press the
key in the main menu until the symbol for
the internal memory has been selected.
16 Philips · PPX3407 · PPX3410
6 Media Playback
Video Playback
Video Playback (USB/SD card/
internal memory)
1Switch the device on using the on/off switch on the
side.
2After the initial screen the main menu appears.
3Use the navigation keys to select Videos.
4Conrm with à.
5 With an inserted memory card or USB stor-
age device: Select the internal memory, the USB
storage medium or the memory card using the keys
.
6Conrm with à.
7Use to select the video le that you wish to
play.
8Press àto start playback.
9Press to end playback and return to the over-
view.
10 When you press again, you will return to the
main menu.
During playback you can adjust the volume using N/
Oon the remote control. Press or Nrepeatedly
to shut off the volume completely.
File Format
There are various video le formats as *.mov, *.avi,
*.m4v. Many of these formats function as a container
that contains the various encoded audio and video les.
MPEG-4, H.264, MP3, and AAC are all examples of
encoded audio/video les. In order to play these les,
the projector must read them and decode the audio/
video signals.
Please note that some les cannot be played as a result
of different video and audio encoders.
Supported File Formats
Note
Navigation keys
All the keys shown are buttons on the
remote control.
Note
Displaying video les
Only those videos that are compatible
with the Pocket Projector will be dis-
played.
Note
Navigation during playback
Review / cue: Press / on the remote
control or À/Á on the device.
Press Tto stop or continue playback.
Container Video Format
*.avi, *.mkv MJPEG, MPEG-4, H.264
*.mov, *.mp4 MPEG-4, H.264
*.ts MPEG-2, H.264
*.m2ts H.264
*.3gp H.263
*.rm, *.rmvb Real video
*.dat, *.vob MPEG-1, MPEG-2
*.mpg, *.mpeg MPEG-1, MPEG-2
Media Playback 17
Video Playback (Mini-HDMI
socket)
1Connect the audio/video output of the external
device to the Pocket Projector's mini-HDMI socket.
Use the corresponding cable and cable adapter for
this purpose (see also chapter Connect to the play-
back device, page 12).
2To nd out how to deactivate the video output for
the external device, please see the relevant instruc-
tion manual. Most often, this option is labeled "TV
out" or "TV Output" in the corresponding menu.
3Start the video playback on the external device.
4Modify the volume with N/O.
Modify settings during playback
1Press the or key.
2Use the keys to choose from the following
settings:
Brightness: Adjust brightness
Contrast: Adjust contrast
Saturation: Adjust colour saturation
Smart Settings: Select predened settings for
brightness / contrast / colour saturation
Volume: Adjust volume level
3Modify the setting using À/Á.
The device saves the modied settings automatically.
Modify other settings
1Press the àbutton.
2Use the keys to choose from the following
settings:
Image Settings: Adjust brightness, contrast, colour
saturation
Sound Settings: Adjust treble, bass and volume
Power Save: This function reduces the light output
in order to increase the operating time for the built-
in battery.
3Conrm with à.
4Modify the setting using àand .
5Conrm with à.
Photo Playback
1Switch the device on using the on/off switch on the
side.
2After the initial screen the main menu appears.
3Use the navigation keys to select Pictures.
4Conrm with à.
5 With an inserted memory card or USB stor-
age device: Select the internal memory, the USB
storage medium or the memory card using the keys
.
6Conrm with à.
7Miniature photos are displayed on the screen as an
overview.
8Use À/Á or to select the image that you
want to start the slide show with.
9Press à to start the slide show.
10 Press Tto pause the slide show.
11 Press to end the slide show and return to the
overview.
12 When you press again, you will return to the
main menu.
Note
Miniature view or list
In the settings, you are able to select whe-
ther the overview will be displayed as mini-
atures or in a list.
Note
Many photos on the memory card or
the USB medium
If there are a lot of photos on the memory
card or the USB storage medium it can
take a moment before the overview
appears.
Note
Zoom in / Zoom out
You can enlarge the displayed image during
the slide show using the key. Use the
keys to move around the
magnied image.
18 Philips · PPX3407 · PPX3410
Music Playback
1Switch the device on using the on/off switch on the
side.
2After the initial screen the main menu appears.
3Use the navigation keys to select Music.
4Conrm with à.
5 With an inserted memory card or USB stor-
age device: Select the internal memory, the USB
storage medium or the memory card using the keys
.
6Conrm with à.
7Use to select the le that you wish to play.
8Press àto start playback.
9Press Tto stop or continue playback.
During playback you can adjust the volume using N/
Oon the remote control. Press or Nrepeatedly
to shut off the volume completely.
Managing les
Copy Files
You can copy les back and forth from the internal
memory to the connected USB storage medium or
memory card.
1Switch the device on using the on/off switch on the
side.
2After the initial screen the main menu appears.
3Use the navigation keys to select Folder View.
4Conrm with à.
5 With an inserted memory card or USB stor-
age device: Select the internal memory, the USB
storage medium or the memory card using the keys
.
6Conrm with à.
7Use to select the le that you want to copy.
8Mark the le using Á. Pressing the key again dese-
lects the chose le(s).
9Use to select other les.
10 Press à.
Note
Switch off the image playback
You can turn off image playback while playing
music in order to save power (see also chap-
ter Music Settings, page 21). As soon as you
press the key, the image reappears and the
fan starts again.
Note
Navigating when image playback is
switched off
Press to skip to the previous or
next song.
Press Tto stop or continue playback.
Press to return to the selection.
Note
No Files Found (0 les)
Only those les that are compatible with
the Projector will be displayed.
Note
Mark the entire folder
You can also mark an entire folder to copy
all les from the folder. Note that the copy
process of large folders can takes some
time.
Media Playback 19
11 Select with Copy.
12 Conrm with à.
13 Use to select the destination memory: SD
card,internal memory or USB storage medium.
14 Conrm with à.
15 The les are copied.
Delete Files
You can delete les from the internal memory, the con-
nected USB storage medium or the memory card.
1Switch the device on using the on/off switch on the
side.
2After the initial screen the main menu appears.
3Use the navigation keys to select Folder View.
4Conrm with à.
5 With an inserted memory card or USB stor-
age device: Select the internal memory, the USB
storage medium or the memory card using the keys
.
6Conrm with à.
7Use to select the le that you want to delete.
8Mark the le using Á. Pressing the key again dese-
lects the chose le(s).
9Use to select other les.
10 Press à.
11 Select with Delete.
12 Conrm with à.
13 Use if you want to delete the les or cancel
the deletion process.
14 Conrm with à.
Note
Files already exist
If the les you are copying already exist in
the target folder, you must choose whe-
ther or not you want to overwrite them
using and à. If you choose not to
overwrite these les, copies will be crea-
ted. The copies can be recognised by a
number added to the le names.
Note
Error
If errors occur during the copying process,
make sure that enough free space is availa-
ble on the medium.
Note
Removing storage medium
Only remove the storage medium after the
copy process is complete.
Note
No Files Found (0 les)
Only those les that are compatible with
the Projector will be displayed.
Note
Error
If errors occur during the deletion pro-
cess, make sure that the storage medium is
not write-protected.
Note
Deleting photos on the memory card
When deleting photos via the computer, note
that the photos may not be correctly dis-
played when the memory card is inserted into
the digital camera again. Digital cameras
sometimes store additional information in
specic folders, including previews and orien-
tation information.
For this reason, only delete the photos using
the digital camera.
20 Philips · PPX3407 · PPX3410
Connect to a Computer (USB)
You can use the USB cable to connect the Pocket
Project to a computer. In this way, you are able to copy
les back and forth between the internal memory, an
inserted memory card and the computer. You can also
delete the les. You can playback the les saved on the
Pocket Projector on your computer.
1Connect the mini-USB socket to the Pocket Projec-
tor and the USB socket to the computer.
2Switch the device on using the on/off switch on the
side.
3A conrmation appears when the devices are con-
nected successfully.
4If a memory card has been inserted, it will be dis-
played as another disk drive.
5You can move, copy or delete data from the compu-
ter, the memory card (if inserted) and the internal
memory.
Note
Successful connection
You cannot use the Pocket Projector when
it is connected to a computer via USB.
Microsoft® Ofce & Adobe® PDF
Files Playback
1Switch the device on using the on using the on/off
switch on the side.
2After the initial screen the main menu appears.
3Use the navigation keys to select Folder View.
4Conrm with à.
5 With an inserted memory card or USB stora-
ge device: Select the internal memory, the USB st-
6Conrm with à.
orage medium or the memory card using the keys
.
7Use to select the Microsoft® Ofce file or A-
8Press à to start view.
9Press to end view and return to the overview.
10 When you press again, you will return to the
dobe® PDF le that you wish to view.
main menu.
Note
Zoom in / Zoom out
You can enlarge the displayed image during
the slide show using the key. Use the
keys to move around the
magnied image.
,
À/Á
Settings 21
7 Settings
1Switch the device on using the on/off switch on the
side.
2After the initial screen the main menu appears.
3Use the navigation keys to select Settings.
4Conrm with à.
5Use to select from the following settings.
6Conrm with à.
7Modify the settings using à,,
8Conrm with à.
The key takes you one step back in the menu.
Image settings
Wall paper—Select background images
Fit Screen—Convert videos and images to 16:9 resolu-
tion
Projection mode
Front—Normal projection; the device is located in
front of the projection surface/screen.
Rear—Rear projection; the device is located behind
the projection surface; the image is horizontal mir-
rored.
Ceiling—The device is hanging from the ceiling in an
upside-down position; the image is rotated by 180
degrees.
Rear ceiling—The device is hanging from the ceiling
in an upside-down position behind the projection
surface; the image is rotated by 180 degrees and hor-
izontal mirrored.
Wall color correction—Colour correction of the pro-
jected image to adjust to coloured projection surfaces
Smart Settings—Select predened settings for bright-
ness / contrast / colour saturation. If you modify these
settings, the setting is switched to Manual.
Brightness—Adjust brightness
Contrast—Adjust contrast
Saturation—Adjust colour saturation
Sound Settings:
Volume—Adjust the volume
Bass—Set the playback of the low frequencies
Treble—Set the playback of the high frequencies
Key tones—Turn key tones on and off
Video Settings
View—Display all videos in a list or a corresponding
folder structure on the drive.
Repeat—Set the repeat type for video les: Repeat
deactivated (Off), repeat all videos in a directory
(Directory), repeat only the current video (Movie),
repeat all videos (All).
Resume play—If this function is activated, playback will
continue at the position it was last stopped. If deacti-
vated, playback will always start at the beginning of the
video.
Music Settings
View—Show all songs in a list or a corresponding folder
structure on the drive.
Screen—Activate or deactivate the projection during
playback.
Repeat—Set the repeat type for music les: Repeat
deactivated (Off), repeat all songs in a directory (Direc-
tory), repeat only the current song (Song), repeat all
songs (All).
Shufe—Activate this function for random playback.
Otherwise, playback will take place in sequence.
Picture Settings
View—Display the images as a thumbnail or as a list
during selection in the main menu.
Time per slide—Image viewing time during slide show
Repeat—Set the type of repeat for slide show photos:
Repeat off (Off), repeat all photos in the directory
(Directory), repeat all stored photos (All).
Slide transition—Set image transitions
Slideshow order—Play slide show in order or ran-
domly
Power Save
Sleep mode—With this function, the projector auto-
matically shuts down after a specied period of time or
at the end of a movie.
Brightness mode—Adjust the brightness level in order
to save the power consumption and increase battery
play time.
22 Philips · PPX3407 · PPX3410
Language
Select the desired language for the menu.
Maintenance
Reset settings—Reset settings to factory defaults.
Firmware Update—Update Firmware
Information—Display free space in the internal mem-
ory and information on the device (Capacity: / Free
space: / Firmware Version / Device name: / Model / Mcu
Version)
Note
Connect for the duration of the rmware
update the power adapter.
Auto demo mode
Play automatically demonstration videos when product
is powered on.
Service 23
8 Service
Care Instructions for the
Battery
The capacity of the battery diminishes with time. You
can prolong the life of the battery if you observe the fol-
lowing points:
rWithout a power supply, the device operates from
the built-in battery. When the battery does not
have sufcient capacity, the device switches to
stand-by mode. Connect the device to the power
supply.
rWhen the battery does not have sufcient capac-
ity, the battery symbol in the display and the bat-
tery status light on the side of the device turns red.
rWhen the device is running for a long period of
time, the surface becomes hot and a warning sym-
bol appears on the projection. The device
switches automatically to stand-by mode when it
gets too hot. After the device has cooled down,
you can continue playback by pressing any key.
rUse the device at least once a week.
rCharge the battery regularly. Don’t store the
device with a completely discharged battery.
rIf the device is not used for several weeks, dis-
charge the battery a little by using the device
before storing it.
rIf the device only works using the USB connection
or with the power supply, the battery is defective.
rKeep the device and the battery away from
sources of heat.
Battery deep discharge
When the battery is in deep discharge or the device is
not used for a longer period, proceed as followed:
1Connect the device to the power supply (see also
chapter Connecting power supply / Charging bat-
tery, page 9). The device behaves as follows:
2The device can be turned on and is ready to use after
approximately ve minutes of charging time.
Battery recharge time with device off
DANGER!
Do not replace the battery yourself
Do not try to replace the battery yourself.
Incorrect handling of the battery or using the
wrong type of battery can cause damage to
the device or cause injury.
Device off Device on
Connect
to a com-
puter
Slow charging Device turns on
and off again.
Connect
to the
power
adapter
Fast charging Device remains
turned on.
Slow charging
Turning on
possible
Completely
charged
Slow charging 5 minutes 10 hours
Fast charging 5 minutes 3 hours
24 Philips · PPX3407 · PPX3410
Cleaning
Cleaning the Lens
Use a brush or lens cleaning paper for cleaning the lens
of the projector.
Device overheated
A overheat symbol appears if the device is overheated.
rAt maximum level of brightness the symbol
appears in the status bar and the device turns
automatically to minimum level of brightness.
rAt minimal level of brightness the symbol shows
for three seconds in the middle of the screen.
Then the device turns off automatically.
DANGER!
Switching off the device!
Switch the device on or off using the power
switch before removing the power supply
from the socket.
DANGER!
Instructions for Cleaning!
Use a soft, lint-free cloth. Never use liquid or
easily ammable cleansers (sprays, abrasives,
polishes, alcohol, etc.). Do not allow any
moisture to reach the interior of the device.
Do not spray the device with any cleaning u-
ids.
Wipe over the surfaces gently. Be careful that
you do not scratch the surfaces.
DANGER!
Do not use any liquid cleaning agents
Do not use any liquid cleaning agents for
cleaning the lens, to avoid damaging the coa-
ting lm on the lens.
Service 25
Troubleshooting
Power Cycling
If a problem occurs that cannot be corrected with the
instructions in this user manual (see also the help
below), follow the steps given here.
1Switch the device off using the on/off switch on the
side.
2Wait at least ten seconds.
3Switch the device on using the on/off switch on the
side.
4If the problem repeats, please contact our technical
customer service or your retailer.
Problems Solutions
The Pocket Projector cannot be switched on rConnect the supplied power supply to recharge the
internal battery.
ehtgnisuemulovehttsujdArdnuosoN O/Nkey on the
remote control.
No sound from the external connected device rCheck the cables to the external device
rSet the volume on the external device
rOnly the original cables from the device manufactu-
rer may function
Bad sound quality with your computer connection rCheck if the audio cable is connected to the compu-
ters headphone socket or the line-out socket.
rThe volume setting on the computer should not be
too high.
Only the initial screen appears and not the image from
the external device
rCheck if the cables are connected to the right
sockets.
rPlease check that the external device is switched on
rCheck if the video output of the external device is
switched on.
Only the initial screen appears and not the image from
the connected computer
rPlease check that the VGA-output of the computer
is switched on.
rCheck if the resolution of the computer is set to
800x600.
Device switches to stand-by mode rWhen the device is running for a long period of time,
the surface becomes hot and a warning symbol
appears on the projection. The device switches auto-
matically to stand-by mode when it gets too hot.
After the device has cooled down, you can continue
playback by pressing any key.
rWhen the battery does not have sufcient capacity,
the device switches to stand-by mode. Connect the
device to the power supply.
Devices changes from maximum level of brightness to
minimum level of brightness when the device is connec-
ted over USB to play videos.
rWhen the environment temperature is too high, the
devices turns automatically from maximum level of
brightness to minimum level of brightness in order to
protect the high power LED.
rUse the device with lower environment temperatu-
res.
Device can not connect with an Android device (for ex-
ample mobilephone/smartphone with Android operating
system) when connected via USB.
rDeactivate the function „USB debugging“ in the set-
tings menu of your Android device before connec-
ting the Pocket Projector via USB; your Android
device should be recognized as USB storage medium.
26 Philips · PPX3407 · PPX3410
9 Appendix
Technical Data
Dimensions (L¦×¦H¦×¦W).......................105¦×¦31¦×¦105¦mm
Weight ..........................................................................0,27¦kg
Recommended Ambient........................................5¦–¦35¦ºC
Relative Humidity ..................20¦–¦80¦% (non-condensing)
File format................................ *.mp4, *.avi, *.mov, *.mkv,
..................................... *.dat, *.mpg, *.mpeg, *.vob, *.ts
............................................. *.m2ts, *.rm, *.rmvb, *.3gp
Photo formats ..................................................... JPEG, BMP
Music formats............... MP3, WAV, WMA, OGG, AAC
Video Standard (CVBS).......... PAL, SECAM, NTSC, HD
Video Standard (YPbPr)....480i/p, 576i/p, 720p, 1080i/p
Video connection ............... Mini-HDMI & A/V-in socket
Headphone connection..........Stereo - jack plug: 3,5¦mm
Audio Output...................................................................1¦W
Internal memory.............................................................4¦GB
Compatible Memory Cards ......SD/SDHC/SDXC/MMC
Technology / Optical
Display technology..................................WVGA 0,3" DLP
Light source........................................................... RGB LED
Resolution .......................................... 854¦x¦480¦Pixel¦(16:9)
...........................................................800¦x¦600¦Pixel¦(4:3)
Supported Resolutions..................... VGA/SVGA/WVGA
..................................................................... XGA/WXGA
Brightness (Bright Mode)...up to 100 lumen (PPX3410)
.............................................up to 65 lumen (PPX3407)
Contrast ratio .............................................................1000:1
Projected image size........................................12¦–120¦inch
Screen distance ...........................................0,5¦m up to 5¦m
Horizontal Scan Rate.........................................31¦–¦69¦kHz
Vertical Scan Rate ................................................56¦–¦85¦Hz
Power supply
Model No................................................................ MPA-630
Manufacturer ............................. Wanlida Group Co., Ltd.
Built-in rechargeable battery
Battery type .................................................................... LiPol
Capacity.........................................................1800mAh 7.4V
Charging time..................................................................... 3¦h
Operating time................................................................... 1¦h
Operating time (ECO mode switched on).................. 2¦h
Manufacturer ................................................... Great Power
Accessories
Following accessories are available for your device:
YUV /YPbPr Adapter Cable.......PPA 1210 / 253447083
VGA-Audio Cable ........................PPA 1250 / 253447070
iPod / iPhone /iPad cable ............PPA 1280 / 253447091
MHL to mini-HDMI cable...........PPA 1240 / 253520048
All data are provided for reference purposes only.
Sagemcom Documents SAS reserves the right to
make any changes without prior notice.
Pico Station....................................PPA 7300 / 253529749
Appendix 27
The CE marking certies that the product meets the
main requirements of the European Parliament and
Council directives 1999/5/CE, 2006/95/CE, 2004/108/C
E and 2009/125/CE on information technology equip-
ment, regarding safety and health of users and regardi-
ng electromagnetic interference.
The declaration of compliance can be consulted on the
site www.picopix.philips.com.
Preservation of the environment as part of a sustainable
development plan is an essential concern of Sagemcom
Documents SAS. The desire of Sagemcom Documents
SAS is to operate systems observing the environment.
The desire of Sagemcom Documents SAS is to operate
systems observing the environment and consequently it
has decided to integrate environmental performances in
the life cycle of this product, from manufacturing to
commissioning use and elimination.
Packaging: The presence of the logo (green dot)
means that a contribution is paid to an approved
national organisation to improve package recovery and
recycling infrastructures. Please respect the sorting
rules set up locally for this kind of waste.
Batteries: If your product contains batteries, they
must be disposed of at an appropriate collection point.
Product: The crossed-out waste bin stuck on the
product means that the product belongs to the family of
electrical and electronic equipment. In this respect, the
European regulations ask you to dispose of it selectively;
rAt sales points in the event of the purchase of similar
equipment.
rAt the collection points made available to you
locally(drop-off centre, selective collection, etc.).
In this way you can participate in the re-use and upgrad-
ing of Electrical and Electronic Equipment Waste, which
can have an effect on the environment and human
health.
The paper and cardboard packaging used can be dis-
posed of as recyclable paper. Have the plastic wrapping
and Styrofoam packaging recycled or dispose of it in the
non-recyclable waste, depending on the requirements
in your country.
Trademarks: The mentioned references in this man-
ual are trademarks of the respective companies. The
lack of the trademarks Éand Ëdoes not justify the
assumption that these dedicated terminologies are free
trademarks. Other product names used herein are for
identication purposes only and may be trademarks of
their respective owners. Sagemcom Documents SAS
disclaims any and all rights in those marks.
Neither Sagemcom Documents SAS nor its afliates
shall be liable to the purchaser of this product or third
parties for damages, losses, costs, or expenses incurred
by the purchaser or third parties as a result of accident,
misuse, or abuse of this product or unauthorized mod-
ications, repairs, or alterations to this product, or fail-
ure to strictly comply with Sagemcom Documents SAS
operating and maintenance instructions.
Sagemcom Documents SAS shall not be liable for any
damages or problems arising from the use of any
options or any consumable materials other than those
designated as original Sagemcom Documents SAS /
PHILIPS products or Sagemcom Documents SAS /
PHILIPS approved products.
Sagemcom Documents SAS shall not be held liable for
any damage resulting from electromagnetic interference
that occurs from the use of any interface cables other
than those designated as Sagemcom Documents SAS /
PHILIPS products.
All rights reserved. No part of this publication may be
reproduced, stored in a retrieval system or transmitted
in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without the
prior written permission of Sagemcom Documents SAS.
The information contained herein is designed only for
use with this product. Sagemcom Documents SAS is not
responsible for any use of this information as applied to
other devices.
This user manual is a document that does not represent
a contract.
Errors, printing errors and changes are reserved.
Copyright È2013 Sagemcom Documents SAS
PPX3407 · 3410
UK
253528536-B
PHILIPS and the PHILIPS’ Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V.
and are used by Sagemcom Documents SAS under license from Koninklijke Philips Electronics N.V.
È2013 Sagemcom Documents SAS
All rights reserved
Sagemcom Documents SAS
Documents Business Unit
Headquarters: CS 50001
92848 Rueil Cedex - FRANCE
Tel: +33 (0)1 57 61 10 00 · Fax: +33 (0)1 57 61 10 01
www.sagemcom.com
Simplied Joint Stock Company · Capital 8.479.978 € · 509 448 841 RCS Nanterre