Philips PPX4935/EU User Manual
Displayed below is the user manual for PPX4935/EU by Philips which is a product in the Data Projectors category. This manual has pages.
Related Manuals
Register your product and get support at
www.philips.com/welcome
PPX4935
EN User Manual
2
Table of Contents
Overview ............................................................... 3
Welcome ............................................................... 3
About this User’s Manual ...................................... 3
What’s in the box .................................................. 3
Product highlights .................................................. 4
1 General Safety Information ............................ 5
Setting up the Device ............................................ 5
Automatic Temperature Control .......................... 5
Repairs ................................................................... 6
Wireless Network (WIFI) ..................................... 6
Dolby Digital.......................................................... 6
Power Supply ......................................................... 6
2 Overview ........................................................ 7
Touchpad ............................................................... 8
Supported Gestures .............................................. 8
Virtual On-Screen Keyboard ................................. 9
Remote Control .................................................. 10
Overview of the Main Menu ............................... 11
Overview of the Options Menu .......................... 11
3 Initial Operation ........................................... 12
Setting up the Device .......................................... 12
Connect Power Supply / Charge Battery ............ 12
Installing or Changing the Batteries of the Remote
Control ................................................................ 12
Using the Remote Control .................................. 13
Initial Setup .......................................................... 14
Turning off the Projector..................................... 14
Standby Mode ...................................................... 14
Indication of different POWER button LED color
............................................................................. 14
4 Connect to various Playback Devices .......... 15
Connecting to Devices with HDMI Output ....... 15
Connecting to an iPhone/iPad/iPod ..................... 15
Connecting to an Android Smartphone or Tablet
via MHL cable ...................................................... 16
Screen Mirroring – Connect Phones or Tablets
wirelessly to share its contents ........................... 16
Connecting Headphones or external Speakers
(cable connection) ............................................... 17
5 Memory ........................................................ 18
Inserting a Memory Card ................................... 18
Connecting an USB Storage Device ................... 18
Connect to a Computer (USB) .......................... 19
6 Internet Connection, Wireless Network (WIFI)
20
Switching Wireless Networking (WiFi) on/off ... 20
Setting up a Wireless Network (WiFi) .............. 20
Setting up a Wireless Network (WiFi) using the
Wizard ................................................................ 21
Wifi Hotspot ...................................................... 21
Activating WiFi Hotspot .................................... 21
Setting up a WiFi Hotspot ................................. 21
DLNA (Digital Living Network Alliance) ........... 22
Switching DLNA on and off ................................ 22
Play Media Using DLNA ..................................... 22
7 Bluetooth ..................................................... 23
Activate Bluetooth ............................................. 23
Set up Bluetooth Parameters ............................. 23
8 Media Playback ........................................... 24
Media Folder ....................................................... 24
How to Navigate in the Media Folder ................ 24
Picture viewer, Slideshow ................................... 25
Music Playback .................................................... 25
File Operations in the Media Folder .................. 25
9 Web Browser ............................................... 27
10 Android / APPs ............................................ 28
Starting installed Android Apps .......................... 28
Exiting Android ................................................... 28
Installing Android-Apps ...................................... 28
11 Settings ....................................................... 29
Overview of the Menu Functions ....................... 29
12 Service ........................................................ 31
Care Instructions for the Battery ....................... 31
Charge the Device .............................................. 31
Cleaning .............................................................. 31
Troubleshooting .................................................. 32
13 Appendix ..................................................... 34
Technical Data .................................................... 34
Accessories ....................................................... 34
Philips PPX4935 3
Overview
Welcome
Dear valued customer, thank you for your great
decision to purchase this PicoPix pocket projector.
We hope you have as much fun using it as we did
creating it!
About this User’s Manual
This manual is designed to let you easily find the
information you need to get the most out from your
pocket projector.
There is no need to read the manual from the
beginning to end. But we suggest that you read
the chapter’s “overview” and “initial operation” as
these will give you a first overview how to operate
the projector
Follow all safety instructions in order to ensure
proper operation of your device.
The manufacturer accepts no liability if these
instructions are not followed.
Symbols Used
Troubleshooting
Tips and tricks that will help you to use
your device more effectively and easily.
CAUTION!
Damage to the device or loss of data!
This symbol gives warning of damage to
the device and possible loss of data.
DANGER!
Danger to persons!
This symbol gives warning of danger to
persons. Physical injury or damage can
result from improper handling.
What’s in the box
❶—PicoPix Projector
❷—HDMI cable
❸—Power supply
❹—Remote control
❺—Pouch
❻—Quick start guide
4
Product highlights
Smart Engine LED technology
• HD resolution (720p)
• Amazing 350 lumens brightness
• Keystone correction
• Texas Instruments DLP® IntelliBright™
technology which intelligently boosts
image brightness, resulting in brighter,
more dynamic images.
Built-in 3W power speaker
• brilliant sound with deep bass performance
• 6 Equalizer settings for perfect sound
Bluetooth audio-out with aptX®
• aptX® Low Latency audio codec ensures
high audio quality and wireless audio/video
synchronization
Wired connectivity
• HDMI connector for all kind of input
devices
• MHL support to share content from your
Smartphone or Tablet
• Headphone connector for external speaker
or headphones
• High power USB to connect external USB
and HDD drives
Wireless connectivity
• WIFI b/g/n to easily connect to private or
public WIFI networks
• DLNA support to access media files stored
on network drives
• WiFiDisplay (Miracast compatible) to
wirelessly share content of your
Smartphone or Tablet
• Built-in web-browser to share or play
internet contents
Multimedia player
• Supports all widely used picture, audio and
video formats
• Micro SD support to have all your media
contents always available
Built-in touchpad
• Multi-touch support for easy navigation
• Pinch & zoom support for pictures and
websites
Philips PPX4935 5
1 General Safety Information
Do not make any changes or settings that are not
described in this user manual. Physical injury or
damage to the device or loss of data can result
from improper handling. Take note of all warning
and safety notes indicated.
Setting up the Device
The unit is for indoor use only. The device should
be placed securely on a stable, flat surface.
Position all cables in such a way that no one will
stumble on them, thus avoiding possible injuries to
persons or damage to the device itself.
Do not plug in the device in moist rooms. Never
touch the mains cable or the mains connection
with wet hands.
The device must have sufficient ventilation and
may not be covered. Do not put your device in
closed cabinets or boxes.
Do not place the machine on soft surfaces such as
tablecloth or carpets and do not cover the
ventilation slits. Otherwise the device could
overheat or catch fire.
Protect the device against direct sunlight, heat,
large temperature fluctuations and moisture. Do
not place the device in the vicinity of heaters or air
conditioners. Observe the information on
temperature and humidity in the technical data.
Do not allow liquids to enter into the device.
Switch off the device and disconnect it from the
mains supply if liquids or foreign substances end
up inside the device. Have the unit inspected by a
technical service department.
Always handle the unit with care. Avoid touching
the lens. Never place heavy or sharp objects on
the projector or the power cable.
If the projector gets too hot or emits smoke, shut it
down immediately and unplug the power cable.
Arrange for your device to be investigated by a
technical service centre. To prevent the spread of
fire, open flames should be kept away from the
device.
Under the following conditions a layer of moisture
can appear inside the device which can lead to
malfunctions:
if the device is moved from a cold to a warm
area
after a cold room is heated
when this device is placed in a damp room.
Proceed as follows to avoid any moisture build-up:
1. Seal this device in a plastic bag before
moving it to another room, in order for it to
adapt to room conditions.
2. Wait one to two hours before you take the
device out of the plastic bag.
The device should not be used in a very dusty
environment. Dust particles and other foreign
objects may damage the unit.
Do not expose the device to extreme vibrations as
internal components my get damaged.
Do not allow children to handle the device without
supervision. The packing materials should be kept
out of the hands of children.
Automatic Temperature
Control
This device includes an automatic thermal
management controller. If the internal temperature
gets too hot, the fan speed will automatically
increase (noise increase), if the temperature still
continue to growth, the brightness of your product
will decrease and finally the current symbol will
appear.
6
The product will automatically switch off the
display after displaying this message during 5s.
This kind of behavior should not arrive except if
the outside temperature is very high (>35°C).
Repairs
Do not repair the device yourself. Improper
maintenance can result in injuries or damage to
the device. Your device must be repaired by an
authorized service center. Find details of
authorized service centers on the warranty card.
Do not remove the type label from the device as
this would void the warranty.
Wireless Network (WIFI)
The function of security systems, medical
equipment or sensitive devices can be disrupted
by the transmission power of the device. Observe
any usage regulations (or restrictions) in the
vicinity of such equipment.
The use of this device can affect the operation of
insufficiently shielded medical devices and
hearing aids and pacemakers through the release
of high frequency radiation. Also consult a doctor
or the manufacturer of the medical device to
establish whether these are sufficiently shielded
from external high frequency radiation.
Dolby Digital
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Power Supply
Use only the enclosed power adapter (see chapter
Appendix / Technical Data). Check whether the
mains voltage of the power supply matches the
mains voltage available at the setup location. This
equipment complies with the voltage type
specified on the unit. The capacity of the battery
diminishes with time. If the device functions only
with the power supply contact an authorized
service center to replace the battery.
Do not try to replace the battery yourself. Incorrect
handling of the battery or using the wrong type of
battery can cause damage to the device or cause
injury.
DANGER!
Risk of explosion with incorrect type
of batteries
Do not try to replace the battery yourself
as there is a risk of explosion if the
incorrect battery type is used.
Switch the device on or off using the power switch
before removing the power supply from the
socket.
Turn off the device and remove it from the power
supply before cleaning the surface. Use a soft,
lint-free cloth. Never use liquid, gaseous or easily
flammable cleansers (sprays, abrasives, polishes,
alcohol). Do not allow any moisture to reach the
interior of the device.
DANGER!
High Power LED
This device is equipped with a high
power LED (Light Emitting Diode), which
emits very bright light. Possible
hazardous optical radiation emitted from
this device. Do not stare at operating
light source. May be harmful to the eyes.
DANGER!
Danger of hearing damage
Do not use the device over a longer time
at high volume - especially when using
headphones.
Philips PPX4935 7
2 Overview
❶—POWER button (hold for 3s to switch on or
off)
❷—Micro-SD card slot
❸—Micro-USB port to connect to a computer
(data exchange) or to connect external devices
like mouse or keyboard via an OTG cable
❹—Audio output - headphone connection or
connection for external speakers
❺—HDMI - HDMI port for a playback device
❻—USB port for a USB storage medium, mouse
or keyboard
❼—DC-IN - Power supply port
❽—Remote control signal receiver window
❾—Focus wheel to adjust image sharpness
❿—Touchpad for navigation and operation of the
PicoPix without remote control
Notice
Note that the distance to the projection
surface must be a minimum of 0.5
meters and a maximum of 5 meters. If
the Pocket Projector is located outside
of this range, it will not be possible to
focus the image. Turn the focus wheel
carefully to avoid damage to the lens.
8
Touchpad
The touchpad is a touch-sensitive surface. Touch
the touchpad with one or more fingers to move the
cursor, navigate in the menu, select menu options
or carry out other actions.
CAUTION!
Ballpoint pen!
Do not use a ball-point pen or other
objects to operate the touchpad. Hard
and sharp objects may damage the
touchpad.
—Calling up the main menu
—Calling up the option menu
—Move back in menu, move back one directory
level / cancel functions
Notice
To enter text you can also use standard
computer keyboard or mouse. It is
possible to use wired models (USB) as
well as wireless models (or a wireless
Keyboard & Mouse combo) with
USB-receiver.
Supported Gestures
Below listed gestures are supported from the
touchpad of your PicoPix Projector. There is a
short description how to execute it as well as an
example of it’s usage.
a. Touch (one-finger press, lift) – to select
items or type on keyboard
b. Double touch (one-finger press, lift &
one-finger press, lift) – to zoom in
c. Double-touch drag (one-finger press, lift &
one-finger press, move & lift) – to scroll or
zoom in/out
d. Pinch open (two-finger press, move
outwards, lift) - zoom in
e. Pinch close (two-finger press, move
inwards, lift) - zoom out
f. Two-finger swipe, scroll, drag (two-finger
press, move, lift) – scroll in lists or websites,
select multiple items
Philips PPX4935 9
Virtual On-Screen Keyboard
When you need to enter text (e.g.: when using the
web-browser or when required to enter a
password), the projector displays a virtual
keyboard which can be operated by the touchpad
or the remote control.
1. Click in the input field using the touchpad,
external mouse or the remote control
2. The software keyboard appears.
3. Use the touchpad/mouse/remote control to
enter the text on the software keyboard.
10
Remote Control
❶—Short press: set PicoPix to standby mode /
wake it up from standby mode
Long press: Power off the projector
❷—Direction Buttons
: Confirms selection
/ , / : Navigation keys / navigation in the
menus / modify settings
/ : Modify settings / access quick settings /
during music playback: select previous or next title
/ : During video playback back/next, fast
forward/backward
❸—Move back in menu, move back one directory
level / cancel functions
❹—Volume keys
: Decrease the volume
: Mute the sound
: Increase the volume
❺—Call up the option menu
❻—Call up the main menu
Philips PPX4935 11
Overview of the Main Menu
1. Switch on the device using the POWER
button (hold it for 3 seconds).
2. After the PicoPix has started up, the main
menu appears (if you switch on the PicoPix
the very first time you will be guided through a
short setup procedure)
3. Select the desired menu using the navigation
keys / , / on your remote control or
use the touchpad to navigate the cursor
4. Confirm with OK on the remote control or tap
once using the touchpad
5. By pressing the key you will return to the
main menu.
6. To move back one step in sub-menus use the
key
7. To modify important settings quickly use the
key to enter the options menu
8. To browse in menus up/down use the /
keys in the remote control or use 2-finger
move on the touchpad
HDMI/MHL—Switch to the external video input
HDMI or MHL.
Media Folder—Display the content of the internal
memory and the inserted memory Micro-SD card
or USB stick (movies, pictures, music, folder view).
Display the content of network drives connected
via WIFI/DLNA
WiFi Display— Display wirelessly multimedia
content from your Smartphone or Tablet on
PicoPix (Miracast compatible)
WWW—Opens an Internet web-browser.
APPs—Shows installed APPs (Android operating
system)
Settings—Configure settings of the device.
Overview of the Options
Menu
To change important settings quickly, you can use
the Options Menu, which can be accessed via the
key.
The Options Menu is accessible also via movie
playback or during a slideshow to change settings
without the need to stop playback and enter the
Settings Menu.
12
3 Initial Operation
Setting up the Device
You should position the device so that it stays flat
on a table in front of the projection surface.
In case you need to tilt the projector upwards you
can correct the projected image with the built-in
keystone correction (Options Menu).
The distance between the projector and the
screen determines the actual size of the image.
Connect Power Supply /
Charge Battery
CAUTION!
Mains Voltage at the Site of
Installation!
Check whether the mains voltage of the
power supply matches the mains
voltage available at the setup location.
1. Insert the small plug of the power supply into
the socket on the rear side of your device.
2. Plug the power supply into the mains.
3. During the charging process, the indicator
light on the side of the device will be red.
When the battery is fully charged, it will turn
green.
4. Charge the built-in battery completely before
using for the first time. This will prolong the life
of the battery.
Installing or Changing the
Batteries of the Remote
Control
DANGER!
Risk of Explosion with Incorrect Type
of Batteries
Only use batteries of type CR2025.
1. To access the battery, disengage the locking
mechanism (❶) and slide out the battery
compartment (❷).
2. Insert the new battery with the positive pole as
shown on the back of the remote control.
Philips PPX4935 13
3. Push the battery compartment back into the
remote control until the locking mechanism
engages.
Notice
Normally the battery will last for around
one year. If the remote control stops
working, please replace the battery.
Using the Remote Control
Point the remote control at the remote sensor on
the back of the device. The remote can be used
within an angle of 60 degrees and up to 5 meters
from the device. When using the remote control,
no obstacle should be placed between the remote
control and remote sensor.
CAUTION!
The improper use of batteries can
lead to overheating, explosion, risk
of fire and injury. Leaking batteries
can possibly damage the remote
control.
Never expose the remote control to
direct sunlight.
Avoid deforming, dismantling or
charging the batteries.
Avoid exposure to open fire and
water.
Replace empty batteries
immediately.
If the device is not used for a long
time, take out the batteries to
prevent leakage and possible
damage to the remote control.
Used batteries should be disposed
of according to the recycling
regulations of your country.
14
Initial Setup
1. Press the POWER button for 3 seconds to
turn the device (the power indicator light will
light up).
2. Turn the device towards a suitable projection
surface or wall. Note that the distance to the
projection surface must be a minimum of 0.5
meters and a maximum of 5 meters. Make
sure the projector is in a secure position.
3. Use the focus wheel on the right side to adjust
the image sharpness.
4. If you switch on the PicoPix the very first time
you will be guided through a short setup
procedure which includes following settings
a) Select language.
b) Set time zone and time.
c) Select usage of projector (Home or
Shop).
Home: for normal use at home
Shop: when you choose this option, the
projector starts in demonstration mode
and automatically displays pictures or
videos stored in the internal memory in a
loop.
d) Set up WIFI connection.
Turning off the Projector
To turn off the PicoPix completely press the
POWER button for 3 seconds on the device or on
the remote control.
Standby Mode
Set your PicoPix in Standby Mode if you would like
to switch it on very quickly again.
To switch the PicoPix to Standby Mode press the
POWER button on the device or on the remote
control shortly (1s). To wake up your PicoPix from
Standby Mode, press shortly again on the
POWER button.
CAUTION!
Please take care to switch your
PicoPix completely off before you
transport it in a bag as only a short
push of the Power button will switch
it on and the packed unit can get
very hot or damaged.
Indication of different
POWER button LED color
1. PicoPix in power off status
a) No light: AC power adaptor not
connected, or internal battery defect.
b) Green: Internal battery full charged.
c) Red: Internal battery under charging.
2. PicoPix in power on status
a) No light: Internal battery defect.
b) Green: Internal battery normal working.
c) Red: Internal battery in low capacity.
3. PicoPix in standby status
a) Green flash: Standby status.
b) Red light with green flash: Internal battery
in low capacity.
Notice
The demonstration mode can be
activated or deactivated in the menu
Settings/ Maintenance/ Demo mode.
Notice
The PicoPix will need some power in
Standby Mode. If kept a long time the
battery can be empty.
Philips PPX4935 15
4 Connect to various Playback Devices
Supplied cables
HDMI cable
Cables available as accessories
PicoPix MHL cable .................... (PPA1340 /
253641800)
Mini DisplayPort cable .............. (PPA1270 /
253520069)
Connecting to Devices with
HDMI Output
Use the HDMI cable to connect the projector to
laptop, DVD/BR player or others devices.
1. Switch the device on using the POWER
button.
2. Connect the mini-HDMI plug of HDMI cable to
the projector's mini-HDMI socket.
3. Connect the HDMI plug of HDMI cable to the
HDMI socket of the playback device.
4. From the main menu, select HDMI/MHL.
Connecting to an
iPhone/iPad/iPod
Use the iPhone/iPad/iPod-HDMI adapter cable
(not supplied) and HDMI cable to connect the
projector to an iPhone/iPad/iPod.
1. Switch the device on using the POWER
button.
2. Connect the mini-HDMI plug of HDMI cable to
the projector's mini-HDMI socket.
3. Connect the HDMI plug of HDMI cable to
HDMI socket of iPhone/iPad/iPod-HDMI
adapter cable.
4. Connect the iPhone/iPad/iPod-HDMI adapter
cable to the playback device.
5. From the main menu, select HDMI/MHL.
16
Connecting to an Android
Smartphone or Tablet via
MHL cable
Use the HML cable (available as accessory) to
connect the projector to your Android Smartphone
or Tablet.
Make sure that your Phone/Tablet is MHL
compatible (www.mhlconsortium.org)
1. Switch the device on using the POWER
button.
2. Connect the mini-HDMI plug of MHL cable to
the projector's mini-HDMI socket.
3. Connect the MHL plug of MHL cable to the
playback device.
4. From the main menu, select HDMI/MHL.
Screen Mirroring – Connect
Phones or Tablets wirelessly
to share its contents
The screen mirroring feature allows you to mirror
your phone or tablet screen on to your projector
screen wirelessly to show content stored on your
handheld device.
Notice
PicoPix and your device must be
connected to the same WiFi network
Android
Make sure that your Phone/Tablet is
Miracast compatible. Please check on the
Wi-Fi Alliance-website:
(www.wi-fi.org/product-finder)
Open Quick Settings (swipe from top to
bottom) and activate ScreenMirroring
Windows
Make sure that your laptop runs at least
Win8.1 and is compatible with Miracast
hardware requirements
iOS
Screen mirroring can be accessed easily
on your iDevice in the Control Center
(swipe up from the bottom of screen) –
and select “EZCast”
1. Switch the device on using the POWER
button.
2. Select Screen Mirroring from the main menu
Notice
When MHL is working without AC power
supply, the USB power output will be
switched off.
Philips PPX4935 17
3. Select the appropriate operating system of
your mobile device in the next screen
a) Android/Windows (Miracast
compatible)
• Select on the Wifi Display (Miracast)
application of the external device to
search for the projector connection
• Example for mobile phones: open
Quick Settings - swipe from top to
bottom- and activate ScreenMirroring
• In the pop-up menu of the projector
select OK to accept the connection.
b) iOS
• Activate Screen mirroring on your
iDevice and select “EZCast Screen” to
share your screen
• Example for mobile phones: open
Control Center (swipe up from the
bottom of screen) – and select
“EZCast Screen” on right side
Connecting Headphones or
external Speakers (cable
connection)
1. Before connecting the headphones, turn
down the volume on the device.
2. Connect the headphones to the projector's
headphone slot. The device speakers
deactivate automatically when the
headphones are connected.
3. After connecting the headphones, increase
the volume to a comfortable level.
DANGER!
Danger of Hearing Damage
Do not use the device over a longer time
at high volume – especially when using
headphones. This could lead to the risks
of hearing damage. Before connecting
the headphones, turn down the volume
on the device. After connecting the
headphones, increase the volume to a
comfortable level.
18
5 Memory
Inserting a Memory Card
1. Insert a microSD-card with the contacts facing
upwards into the microSD slot at the side of
the device.
2. Insert the Micro-SD card into the slot and
push until it snaps into position with a “click”
3. Open Media Folder on the main screen to
access the contents of the memory card
4. To remove the memory card push on it (until
you hear a “click”) and it will eject
automatically
Connecting an USB Storage
Device
1. Connect the USB storage medium to the USB
port on the back of the device.
2. Open Media Folder on the main screen to
access the contents of the USB medium
DANGER!
Inserting a Memory Device!
Never pull out the memory device while
the device is accessing it. This could
cause data to be damaged or lost.
Switch the device off in order to make
sure that the device does not access the
memory.
Philips PPX4935 19
Connect to a Computer
(USB)
The User Manual and drivers are stored on the
internal memory of the PicoPix - use a microUSB
cable to connect the Projector to a computer to
access these files.
In this way, you are able to copy files back and
forth between the internal memory, an inserted
memory card and the computer.
1. Switch the device on using the POWER
button.
2. After switching on the device the main menu
appears.
3. Connect the micro-USB plug to the Pocket
Projector and the USB plug to the computer.
Notice
You cannot use the memory for media
playback when the Pocket Projector is
connected to a computer via USB.
4. If a memory card has been inserted, it will be
displayed as another disk drive.
5. You can move, copy or delete data from the
computer, the memory card (if inserted) and
the internal memory.
20
6 Internet Connection, Wireless Network
(WIFI)
The projector can be connected to the Internet via
a wireless (WiFi) connection.
Use the procedure below appropriate to the type
of connection you want.
DANGER!
Information on Using WIFI!
The functioning of security systems,
medical equipment or sensitive devices
can be disrupted by the transmission
power of the device. Observe any usage
regulations (or restrictions) in the vicinity
of such equipment.
The use of this device can affect the
operation of insufficiently shielded
medical devices and hearing aids and
pacemakers through the release of high
frequency radiation. Also consult a
doctor or the manufacturer of the
medical device to establish whether
these are sufficiently shielded from
external high frequency radiation.
Switching Wireless
Networking (WiFi) on/off
Wireless networking is deactivated by default. You
have the option of turning this function on.
1. Switch the device on using the POWER
button.
2. After switching on the device the main menu
appears.
3. Use the navigation keys to select Settings.
4. Confirm with OK.
5. Using / to select Wireless and
Networks.
6. Confirm with OK.
7. Using / to select WIFI.
8. Confirm with OK.
9. Modify the settings with / .
10. Confirm with OK.
The key takes you one step back in the menu.
Setting up a Wireless
Network (WiFi)
1. Switch the device on using the POWER
button.
2. After switching on the device the main menu
appears.
3. Use the navigation keys to select Settings.
4. Confirm with OK.
5. Using / to select Wireless and
Networks.
6. Confirm with OK.
7. Using / to select WIFI Selection.
8. Confirm with OK.
9. Use / to select the desired wireless
network.
10. Confirm with OK.
11. If your wireless network is password protected,
an input window appears. Select the input
field using the navigation keys of the remote
control and press OK.
12. Enter the password with the virtual keyboard
using the navigation keys of the remote
control or with an external keyboard.
13. Click on Connect.
The key takes you one step back in the menu.
Philips PPX4935 21
Setting up a Wireless
Network (WiFi) using the
Wizard
You can integrate your device very quickly and
easily into an existing wireless network using WiFi
Protected Setup (WPS) or using a wireless
network scan. Using WPS, all important settings
like network name (SSID) are automatically
configured and the connection protected with
secure WPA Encryption.
Using Wi-Fi Protected Set-up (WPS)
Using WiFi Protected Setup (WPS), you can
integrate your device into an existing wireless
network in two different ways very quickly and
easily. You can activate the login with a pin code
or using Push Button Configuration (PBC), if your
access point (Access Point, Router) supports this
method.
Using WPS with Push Button
Configuration (PBC)
1. Switch the device on using the POWER
button.
2. After switching on the device the main menu
appears.
3. Use the navigation keys to select Settings.
4. Confirm with OK.
5. Using / to select Wireless and
Networks.
6. Confirm with OK.
7. Using / to select WIFI Selection.
8. Confirm with OK.
9. Use / to select the desired wireless
network.
10. Confirm with OK.
11. Activate Push Button Configuration on the
WIFI access point. The WIFI access point and
device connect automatically and create a
WPA protected connection.
Wifi Hotspot
Notice
The projector can work as an access
point, if no, or only a 3G wireless
network is working in the location of use.
You can use the portable Wi-Fi hotspot to share
the device’s network connection with computers or
other devices through the Wi-Fi network.
Notice
When the WiFi hotspot mode is
activated, it takes priority over other
connections.
Activating WiFi Hotspot
1. Switch the device on using the POWER
button.
2. After switching on the device the main menu
appears.
3. Use the navigation keys to select Settings.
4. Confirm with OK.
5. Using / to select Wireless and
Networks.
6. Confirm with OK.
7. Using / to select WIFI Hotspot.
8. Confirm with OK.
9. Using / to select Portable WiFi
Hotspot.
10. Confirm with OK.
11. Use / to select On.
12. Confirm with OK.
The projector is now visible by other Wifi devices.
Setting up a WiFi Hotspot
To modify the WiFi hotspot name and define the
security level.
1. Switch the device on using the POWER
button.
2. After switching on the device the main menu
appears.
22
3. Use the navigation keys to select Settings.
4. Confirm with OK.
5. Using / to select Wireless and
Networks.
6. Confirm with OK.
7. Using / to select WIFI Hotspot.
8. Confirm with OK.
9. Using / to select Setup WiFi Hotspot.
10. Confirm with OK.
11. Modify the settings based on actual situation.
Item Description
Network SSID Name of the WiFi hotspot.
This is the name used to
identify your projector when it is
detected by another WiFi
device.
To modify the name, select the
field and press OK. With the
keyboard, enter the new name.
Security Select among the 3 levels of
security.
• Open (without security)
• WPA PSK
• WPA2 PSK
Password Select the field and press OK.
With the keyboard, enter the
new password.
Show password Check the box to display the
password.
12. Using / to select Save.
13. Confirm with OK.
DLNA (Digital Living
Network Alliance)
This device supports DLNA (Digital Living Network
Alliance) to easily share data over a home network,
such as videos and photos.
Depending on the DLNA-compatible devices you
own, you will be able to e.g.: stream films from
your laptop or server to your PicoPix Projector.
Switching DLNA on and off
The DLNA function is switched on by default. You
have the option of turning this function off.
1. Switch the device on using the POWER
button.
2. After switching on the device the main menu
appears.
3. Use the navigation keys to select Settings.
4. Confirm with OK.
5. Using / to select Wireless and
Networks.
6. Confirm with OK.
7. Using / to select DLNA.
8. Confirm with OK.
9. Modify the settings with / .
10. Confirm with OK.
The key takes you one step back in the menu.
Play Media Using DLNA
If DLNA enabled devices are located in the
connected network, then you can access them in
media playback and file management by
accessing Media Folder from Main Menu
Philips PPX4935 23
7 Bluetooth
Your PicoPix comes with aptX® Low Latency
audio codec which ensures high audio quality
and wireless audio/video synchronization.
Just activate the built-in Bluetooth function to
connect external speakers to the projector.
Notice
The Option menu provides only quick
access to prior connected (paired)
devices in Bluetooth settings. To pair a
device you need to enter settings on
the main screen to do the basic setup.
Activate Bluetooth
1. Switch the device on using the POWER
button.
2. After switching on the device the main menu
appears.
3. Use the navigation keys to select Settings.
4. Confirm with OK.
5. Using / to select Wireless and
Networks.
6. Confirm with OK.
7. Using / to select Bluetooth.
8. Confirm with OK.
9. Using / to select On.
10. Confirm with OK.
Set up Bluetooth
Parameters
1. Switch the device on using the POWER
button.
2. After switching on the device the main menu
appears.
3. Use the navigation keys to select Settings.
4. Confirm with OK.
5. Using / to select Wireless and
Networks.
6. Confirm with OK.
7. Using / to select Bluetooth Selection.
8. Confirm with OK to enter detailed settings
menu
9. Activate “Pairing” on your external Bluetooth
speaker
10. Click “Search for devices” in order to initiate
searching for your external speaker
11. Click on the found speaker shown in the
device list to initiate pairing process
12. If you are asked to enter a Pairing Code
please use the code provided from the
speaker manufacturer (you can try 0000 or
1234)
13. The external speaker will be shown as
“connected” in the device list.
24
8 Media Playback
Media Folder
In general the Media Folder is used to select
movie, picture or music files for playback in the
built-in media player.
Enter Media Folder in order to
• access files located in
o internal memory
o connected USB memory devices
o microSD card
o network locations (DLNA)
• select installable “APK” files to install 3rd
party APPs
• perform file operations (copy, move and
delete files)
How to Navigate in the
Media Folder
To navigate in the Media Folder, use the
following keys:
Keys Action
or To select folders or files in the
displayed list.
or OK For directories, goes one level
down.
For files, starts the selected
media file.
or Goes one level up in the
directory
structure.
Exits to main screen.
In order to optimize the navigation, you can
select a file type on the list:
• FOLDERS to view all files (photo, audio,
video and installable APPs).
• MOVIES to view videos files only.
• PICTURES to view photo files only.
• MUSIC to view audio files only.
1. Switch the device on using the POWER
button.
2. After switching on the device the main menu
appears.
3. Use the navigation keys to select Media
Folder.
4. Confirm with OK.
5. Using / to select Folders, Movies,
Pictures or Music.
6. Confirm with OK.
7. Using / to select subfolder or file to be
played.
8. Confirm with OK.
Notice
Only those videos that are compatible
with the projector will be displayed.
Philips PPX4935 25
Picture viewer, Slideshow
Keys Action
Start / Stop the picture
slideshow
Calls up the Option Menu.
Select Picture viewer to
setup the slideshow options
(see below)
Select music files to start a
picture slideshow with
background music
Rotate the picture
Exits to main screen.
Music Playback
If you play music files the projection screen will
be switched off automatically if no touchpad or
remote control input is detected. As soon as you
press any key the screen will be switched on
again immediately.
You can modify this behavior in Settings or
Option Menu by changing Screen mode setting
in Music section.
File Operations in the
Media Folder
or OK/
Double touch & hold: selects a
file (marked with a green tick)
Remote control: long-press
OK button to select first file
then use right arrow to select
others
Single touch: marks other files
(only works if at least one file
has been selected already)
Calls up the Option Menu for
file operations (copy, move or
delete)
26
Supported video file formats
Container Video codec
*.3gp MPEG-4, H.263
*.asf WMV3
*.avi MPEG-4, DivX, XviD,
H.263, H.264, VC-1,
WMV3
*.flv H.263, H.264
*.m2ts, .ts H.264, VC-1
*.mkv H.264, WMV3
*.mp4 MPEG-4, H.263,
H.264
*.mov MPEG-4, H.263,
H.264
*.mts H.264
*.rm, *.rmvb RV 8/9/10
*.wmv WMV3
Supported audio file formats
Container Audio codec
*.mp3 MPEG-1, MPEG-2,
MPEG-2.5, Audio
Layer 1/2/3
*.wma WMA 7/8/9
*.wav PCM, ADPCM, U-Law
*.ogg, *.oga Vorbis
*.flac FLAC
*.alac ALAC
*.ape APE
*.aac AAC, AAC+
Supported Photo File Formats
Container Image codec
*.jpg, *.jpeg JPEG, GIF
*.bmp BMP
*.webp PNG
*.tif TIF
Philips PPX4935 27
9 Web Browser
Your PicoPix has a preinstalled WebBrowser which
you can access easily from the main menu by
clicking on the globe icon (WWW).
Notice
To easily browse the internet and enter
various links or web addresses we
recommend connecting an USB mouse
or an USB keyboard to the USB port of
the projector.
28
10 Android / APPs
Your projector uses an Android operating system
allowing you to install additional applications.
This enables you to add additional functionality
to your device.
Notice
As there are a millions of different
applications (APPs) available we
cannot guarantee that each single one
works on your PicoPix projector.
Starting installed Android
Apps
1. Switch the device on using the POWER
button.
2. After switching on the device the main menu
appears.
3. Use the navigation keys to select APPs.
4. Confirm with OK.
5. Select the APP you want to use and confirm
with OK.
Exiting Android
Press the key to return to the main menu.
Installing Android-Apps
CAUTION!
Trusted Sources!
Apps from third party sources may be
malicious.
Only use installation packets from
trusted sources.
To install other APPs you have 2 options: install
the APK file manually or use the pre-installed
Aptoide Store to download and install the APPs
directly on the device
Manual installation of APK files:
1. Download the APK file and save it onto a
Micro-SD card or USB stick.
2. Insert the Micro-SD card or USB stick into
the device.
3. Switch the device on using the POWER
button.
4. After switching on the device the main menu
appears.
5. Use the navigation keys to select Media
Folder.
6. Confirm with OK.
7. Use the navigation keys to find and select
the previously downloaded APK file and
confirm with OK.
8. Follow the installation procedure on the
screen
Installation of APPs via Aptoide Store:
1. Switch the device on using the POWER
button.
2. After switching on the device the main menu
appears.
3. Use the navigation keys to select APPs.
4. Confirm with OK.
5. Select the Aptoide APP and confirm with
OK.
6. In the store you can use the search function
to find and install your desired application.
Philips PPX4935 29
11 Settings
Notice
With the -key you can call up the
Options Menu which provides the
most important settings. The Options
Menu is also accessible during media
playback to do adjustments right away.
Overview of the Menu
Functions
Wireless and Network
WiFi – switching the wireless network (WiFi) off
and on.
WiFi Selection – select the wireless network with
which the device is to connect.
WiFi Hot Spot – activate and deactivate WiFi
tethering.
VPN settings – set up parameters of VPN.
Mobile networks – set up parameters about
mobile networks.
DLNA – switching DLNA off and on.
Bluetooth – switching the Bluetooth connection
off and on.
Bluetooth Selection – set up parameters of
Bluetooth connection.
Image
Keystone correction – use / to skew the
output image, thereby making it rectangular.
Fit Screen – use / to select the screen
mode.
Projection mode
Front – normal projection; the device is
located in front of the projection
surface/screen.
Rear – rear projection; the device is located
behind the projection surface; the image is
reflected horizontally.
Front Ceiling – the device is hanging from
the ceiling in an upside-down position; the
image is rotated by 180 degrees.
Rear ceiling – the device is located behind
the projection surface, hanging from the
ceiling in an upside-down position; the
image is rotated by 180 degrees and
reflected horizontally.
Wall color correction – color correction of the
projected image to adjust to colored projection
surfaces.
Smart Settings – select predefined settings for
brightness / contrast / color saturation. If you
modify these settings, the setting is switched to
Manual.
Brightness – adjust the brightness of image.
Contrast – adjust the contrast of image.
Saturation - adjust the color saturation of image.
IntelliBright – switching the intelliBrightTM
function off and on.
* intelliBrightTM is a technique from TI (Texas
Instruments) DLP® that adaptively enhances
dim regions of an image, resulting in brighter and
more dynamic image.
Sound
Volume – adjust the volume.
Deep Bass – switching the deep bass on and off.
Equalizer – select the equalizer mode.
Key beep – turn key tones on and off.
Video Player
Language – Select the language of video file.
Subtitle – Set the subtitle of video file, or switch
off.
Repeat mode – Set the repeat type for video files:
Repeat deactivated (Off), repeat only the current
video (Movie), repeat all videos in a directory
(Directory), repeat all videos (All).
Music Player
Screen mode – Activate or deactivate the
projection during playback.
Repeat – Set the repeat type for music files:
30
Repeat deactivated (Off), repeat only the current
song (Song), repeat all songs in a directory
(Directory), repeat all songs (All).
Shuffle – Activate this function for random
playback. Otherwise, playback will take place in
sequence.
Picture Viewer
Time per slide – Image viewing time during slide
show.
Repeat – Set the type of repeat for slide show
photos: Repeat off (Off), repeat all photos in the
directory (Directory), repeat all stored photos
(All).
Transition effect – Set image transitions.
Slideshow order – Play slide show in order or
randomly.
System Settings
Date and time – set date and time.
Android Settings – set Android system.
Wall paper – Select background images.
Sleep mode – With this function, the projector
automatically goes to ECO mode after a
specified period of time or at the end of a movie.
Brightness mode – select different brightness
mode.
Language
Select the desired language for the menu.
Maintenance
Reset settings – Reset settings to factory
defaults.
Online firmware update - Update firmware. The
firmware package will be downloaded from
Internet.
Demo mode – switching demo mode on and off.
Information – Display free space in the internal
memory and information on the device
(Firmware version / Device name / Model / MAC
address / IP address / serial number).
Philips PPX4935 31
12 Service
Care Instructions for the
Battery
The capacity of the battery diminishes with time.
You can prolong the life of the battery if you
observe the following points:
Without a power supply, the device operates
from the built-in battery. When the battery
does not have sufficient capacity, the device
turns off. Connect the device to the power
supply.
When the battery does not have sufficient
capacity, it will be indicated by the color of
the power switch and the battery symbol in
the display.
Charge the battery regularly. Don’t store the
device with a completely discharged battery.
Keep the device and the battery away from
sources of heat.
DANGER!
Do not Replace the Battery Yourself
Do not try to replace the battery
yourself. Incorrect handling of the
battery or using the wrong type of
battery can cause damage to the
device or cause injury.
Charge the Device
Device off Device on
Connected
to the
power
adapter
The indicator
light on the
side of the
device turns
red.
Fast charging
within about
3 hours.
When
charging is
completed
the indicator
light turns off.
Device
remains
turned on.
Slow
charging
within about
10 hours.
When
charging is
completed
the indicator
light turns
green.
Cleaning
DANGER!
Instructions for Cleaning!
Use a soft, lint-free cloth. Never use
liquid or easily flammable cleansers
(sprays, abrasives, polishes, alcohol,
etc.). Do not allow any moisture to
reach the interior of the device. Wipe
over the surfaces gently to avoid
scratches to the surface..
Cleaning the Lens
Use a lens brush or lens cleaning paper for
cleaning the lens of the projector.
DANGER!
Do not use any Liquid Cleaning
Agents
Do not use any liquid cleaning agents
for cleaning the lens, to avoid
damaging the coating film on the lens.
32
Troubleshooting
Power Cycling
If a problem occurs that cannot be corrected with
the instructions in this user manual (see also the
help below), follow the steps given here.
1. Switch the device off using the POWER
button.
2. Wait at least ten seconds.
3. Switch the device on using the POWER
button.
4. If the problem cannot be solved, please
contact our customer service or your retailer.
Problems Solutions
The Pocket Projector is unresponsive or hung up. Long press the POWER button for 10 seconds
until the projector is forced to power off.
Switch the projector on again.
The Pocket Projector cannot be switched on. Connect the supplied power supply to recharge
the internal battery.
Wait for 10 minutes, then switch on the
projector.
No sound. Adjust the volume using the / keys on the
remote control.
No sound from the external connected device. Check the cables to the external device.
Set the volume on the external device.
Only the original cables from the device
manufacturer may work properly
Bad sound quality with a computer connection. Check if the audio cable is connected to the
computer line-out socket.
The volume setting on the computer should not
be too high.
Only the initial screen appears and not the image
from the external device.
Check if the cables are connected to the right
sockets.
Please check that the external device is
switched on and output is set to HDMI
Only the initial screen appears and not the image
from the connected computer.
Check if the cables are connected to the right
sockets.
Check if the resolution of the computer is set to
1280*720.
Device turns off When the device is running for a long period of
time, it may get hot and a warning symbol
appears on the screen. The device
automatically turns off when it gets too hot.
After the device has cooled down, it can be
switched on and used again.
When the battery does not have sufficient
capacity, the device turns off. Connect the
device to the power supply.
Philips PPX4935 33
The projector has APD (Auto Power Down)
mode for power saving. If stays in main menu
for 30 minutes without any operation, the
projector will go to stand-by mode
automatically.
Device changes from maximum level of brightness
to a lower level of brightness during playback.
When the environment temperature is too high,
the device turns automatically from maximum
level of brightness to a lower level of brightness
in order to protect the high power LEDs.
Bad image or color quality when connecting with
HDMI.
Use the supplied HDMI cable. Third-party
cables may cause signal distortions.
The device cannot read a microSD card or USB
stick.
The device does not support exFAT file
system, please use FAT format instead.
34
13 Appendix
Technical Data
Dimensions (L×H×W ............ 115 × 32 × 115 mm
Weight .................................................. 0,351 kg
Recommended Ambient ...................... 5 – 35 ºC
Relative Humidity ...............................................
.............................. 15 – 85 % (non-condensing)
File format ......................... 3gp, *.asf, *.avi, *.flv,
...................... *.m2ts, *.ts, *.mkv, *.mp4,
........... *.mov, *.mts, *.rm, *.rmvb, *wmv
Photo formats .......... JPEG, BMP, PNG, GIF, TIF
Music formats ............... MP2, MP3, WAV, WMA,
.................... OGG, OGA, FLAC, ALAC,
.................................... APE, AAC, M4A
Video connection .................... Mini-HDMI socket
Headphone connection Stereo,
.................................................... 3.5 mm socket
Internal speaker.................................. mono 3 W
Internal memory ......................................... 4 GB
Compatible Memory Card ... Micro-SD (TF) card
Standard USB port max. power
................................................ 5 V , 1000 mA
Micro USB port max. power ........ 5V , 500mA
MHL port max. power ............... 5V , 1000 mA
Technology / optical
Display technology ................... 720P 0.3" DLP®
Light source ........................................ RGB LED
Native resolution............ 1280 x 720 Pixel (16:9)
Supported Resolutions ......... VGA/SVGA/WVGA
........................................ XGA/WXGA/FULL HD
Projected image size ..................... 15 - 150 inch
....................................................... 38 – 381 cm
Screen distance.................................... 0.5 - 5 m
Display refresh rate .............................. 60/50 Hz
Power supply
Model No ............................... HKA04519024-XA
Input ................ 100-240 V, 50/60 Hz, max. 1.2 A
Output ......................................... 19 Vdc, 2.37 A
Manufacturer ......................................... Huntkey
Built-in rechargeable battery
Battery type ............................. Lithium-Polymer
Capacity .................................... 2000 mAh 7.4 V
Charging time ................................................ 3 h
Operating time ........................................... 1.5 h
Manufacturer ................................. Fujian United
Accessories
Following accessories are available for your
device:
PicoPix MHL cable ..... (PPA1340 / 253641800)
Mini DisplayPort cable . (PPA1270 / 253520069)
PicoPix cover ............... (PPA4400 / 253641813)
All data are provided for reference purposes only.
Sagemcom Documents SAS reserves the right
to make any changes without prior notice.
Philips PPX4935 35
The CE marking certifies that the product meets the
main requirements of the European Parliament and
Council directives 1999/5/CE, 2006/95/CE,
2004/108/CE and 2009/125/CE on information
technology equipment, regarding safety and health of
users and regarding electromagnetic interference.
The declaration of compliance can be consulted on
the site www.picopix.philips.com.
Preservation of the environment as part of a
sustainable development plan is an essential concern
of Sagemcom Documents SAS. The desire of
Sagemcom Documents SAS is to operate systems
observing the environment. The desire of Sagemcom
Documents SAS is to operate systems observing the
environment and consequently it has decided to
integrate environmental performances in the life cycle
of this products, from manufacturing to
commissioning use and elimination.
Packaging: The presence of the logo (green dot)
means that a contribution is paid to an approved
national organization to improve package recovery
and recycling infrastructures. Please respect the
sorting rules set up locally for this kind of waste.
Batteries: If your product contains batteries, they
must be disposed of at an appropriate collection
point.
Product: The crossed-out waste bin stuck on the
product means that the product belongs to the family
of electrical and electronic equipment. In this respect,
the European regulations ask you to dispose of it
selectively:
• At sales points in the event of the purchase of
similar equipment.
• At the collection points made available to you
locally (drop-off center, selective collection,
etc.).
In this way you can participate in the re-use and
upgrading of Electrical and Electronic Equipment
Waste, which can have an effect on the environment
and human health.
The paper and cardboard packaging used can be
disposed of as recyclable paper. Have the plastic
wrapping recycled or dispose of it in the
non-recyclable waste, depending on the requirements
in your country.
Trademarks: The mentioned references in this
manual are trademarks of the respective companies.
The lack of the trademarks ® and TM does not justify
the assumption that these dedicated terminologies
are free trademarks. Other product names used
herein are for identification purposes only and may be
trademarks of their respective owners. Sagemcom
Documents SAS disclaims any and all rights in those
marks.
Neither Sagemcom Documents SAS nor its affiliates
shall be liable to the purchaser of this product or third
parties for damages, losses, costs, or expenses
incurred by the purchaser or third parties as a result
of accident, misuse, or abuse of this product or
unauthorized modifications, repairs, or alterations to
this product, or failure to strictly comply with
Sagemcom Documents SAS operating and
maintenance instructions.
Sagemcom Documents SAS shall not be liable for
any damages or problems arising from the use of any
options or any consumable materials other than those
designated as original Sagemcom Documents SAS /
PHILIPS products or Sagemcom Documents SAS /
PHILIPS approved products.
Sagemcom Documents SAS shall not be held liable
for any damage resulting from electromagnetic
interference that occurs from the use of any interface
cables other than those designated as Sagemcom
Documents SAS / PHILIPS products.
All rights reserved. No part of this publication may be
reproduced, stored in a retrieval system or
transmitted in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise,
without the prior written permission of Sagemcom
Documents SAS. The information contained herein is
designed only for use with this product. Sagemcom
Documents SAS is not responsible for any use of this
information as applied to other devices.
This user manual is a document that does not
represent a contract.
Errors, printing errors and changes are reserved.
Copyright © 2015 Sagemcom Documents SAS
PHILIPS and the PHILIPS’ Shield Emblem are registered trademarks of Koninklijke Philips N.V.
and are used by Sagemcom under license from Koninklijke Philips N.V.
© 2015 Sagemcom Documents SAS
All rights reserved
Sagemcom Documents SAS
Documents Business Unit
Headquaters: 250, route de l’Empereur
92848 Rueil-Malmaison Cedex FRANCE
Tel: +33 (0)1 57 61 10 00 Fax: +33 (0)1 57 61 10 01 PPX4935
www.sagemcom.com EN
Simplified Joint Stock Company Capital 8.479.978€ 509 448 841 RCS Nanterre VERSION A