Register your product and get support at
Always there to help you
Important Safety Instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings. Install in accordance with the manufacturer’s
h Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
i Only use attachments/accessories specied by the manufacturer.
j Refer all servicing to qualied service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
k Apparatus shall not be exposed to dripping or splashing.
l Do not place any sources of danger on the apparatus (e.g. liquid lled objects, lighted
m Only use power supplies listed in the user manual.
•Never remove the casing of this apparatus.
•Never lubricate any part of this apparatus.
•Never place this apparatus on other electrical equipment.
Any changes or modications made to this device that are not expressly approved by WOOX
Innovations may void the user’s authority to operate the equipment.
Notice for the USA and Canada
This device complies with Part 15 of the FCC Rules and RSS standard of Industry Canada.
Operation is subject to the following two conditions:
1 this device may not cause harmful interference, and
2 this device must accept any interference received, including interference that may cause
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules and ICES-003 of Industry Canada . These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
• Consult the dealer or an experienced radio/TV technician for help.
RF Radiation Exposure Statement: This equipment complies with FCC’s and IC’s RF radiation
exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter
must be installed and operated to provide a separation distance of at least 20 cm from all persons
and must not be collocated or operating in conjunction with any other antenna or transmitter.
Installers must ensure that 20cm separation distance will be maintained between the device
(excluding its handset) and users.
Disposal of your old product
Your product is designed and manufactured with high quality materials and components, which can
be recycled and reused.
Never dispose of your product with other household waste. Please inform yourself about the local
rules on the separate collection of electrical and electronic products and batteries. The correct
disposal of these products helps prevent potentially negative consequences on the environment and
Your product contains batteries, which cannot be disposed of with normal household
waste. Please inform yourself about the local rules on separate collection of batteries.
The correct disposal of batteries helps prevent potentially negative consequences on the
environment and human health.
Please visit www.recycle.philips.com for additional information on a recycling center in your area.
Always bring your product to a professional to remove the built-in battery.
“For use in Mexico, the operation of this equipment is subject to the following two conditions: (1) it is
possible that this computer or device does not cause harmful interference and (2) the equipment or
device must accept any interference, including that may cause undesired operation. “
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate
into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam
Your system consists of materials which can be recycled and reused if disassembled by a specialized
company. Please observe the local regulations regarding the disposal of packaging materials,
exhausted batteries and old equipment.
The making of unauthorized copies of copy-protected material, including computer programs, les,
broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal
offence. This equipment should not be used for such purposes.
•The type plate is located on the bottom of the apparatus.
2 Your Bluetooth Speaker
Congratulations on your purchase, and welcome to Philips! To fully benet from the support that
Philips offers, register your product at www.philips.com/welcome.
What’s in the box
With this speaker, you can enjoy audio from the compatible Bluetooth device or your PC/ Mac.
3 Get started
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of this apparatus. The
model number and serial number are on the bottom of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
The speaker can operate on built-in rechargeable battery.
To recharge the built-in battery:
Connect micro USB socket( ) with PC through supplied USB cable.
» The power indicator( ) turns on.(white)
• The power indicator turns off when it’s fully charged.
The carabiner( ) is used for easy carrying or hanging, not for climbing support or fall protection.
Play from a Bluetooth device
•The effecitve operation range between the speaker and your Bluetooth device is
approximately 10 meters (30 feet).
1 Slide ( ) towards to select Bluetooth audio source.
» The Bluetooth indicator( ) ashes.(Blue)
2 Activate the Bluetooth function in your Bluetooth device.
3 Select “PHILIPS SBT30” on your Bluetooth device for pairing.
» The speaker beeps twice and the Bluetooth indicator( ) stays steadily on.(Blue)
• For some devices, you may need to input “0000” as pairing password.
4 Start music play on your Bluetooth device.
When there is an incoming call:
• Press Bluetooth button( ) to pick up the call.
• Press Bluetooth button( ) again to hang up the call.
•You can speak to the MIC( ) to get the best speakerphone performance.
Play from an external device
1 Slide ( ) towards AUX to select Aux-in audio source.
» The power indicator( ) turns white.
2 Connect your speaker with an external device throught the supplied USB cable.
3 Start music play on your device.
5 Product information
•Product information is subject to change without prior notice.
Rated Output Power 2W RMS
Signal to Noise Ratio >70dB
Aux-in Link 600 mV RMS, 10 kohm
Bluetooth specication V2.1+EDR
Supported Proles HFPv1.6, AD2Pv1.2, HSPv1.2
Advanced features Echo and noise cancellations
Range 10 m/33 feet line of sight
DC power input USB: 5V, 500mA;
Built-in Li-Polymer battery 3.7V 500mAH
Battery working time >8 hours
Dimensions-Main Unit(diameter x height) D68mm * H81mm
Weight- Main Unit 0.14 kg
•Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the following points before requesting
service. If the problem remains unsolved, go to the Philips web site (www.philips.com/welcome). When
you contact Philips, ensure that the apparatus is nearby and the model number and serial number are
•Recharge your speaker.
•Adjust volume on your mobile phone or PC/Mac.
•Make sure that your Bluetooth mobile phone is within the effective operation range.
•Check if you have selected the correct audio source.
No response from the speaker
•Restart the speaker.
Specifications are subject to change without notice
2013 © WOOX Innovations Limited. All rights reserved.
This product was brought to the market by WOOX
Innovations Limited or one of its affiliates, further referred
to in this document as WOOX Innovations, and is the
manufacturer of the product. WOOX Innovations is the
warrantor in relation to the product with which this booklet
was packaged. Philips and the Philips Shield Emblem are
registered trademarks of Koninklijke Philips N.V.